Return to slp.conf CVS log

Up to [Pegasus] / pegasus / src / slp / slp_client / conf

Integrate slp_client using pegasus standard make environment

################################# slp.conf ###############################
#									  #
#                    configuration file for l-SLP kernel                  #
#                                                                         #
###########################################################################


##### DA Advertisement #######
#
#  DA advertisement provides regular publication over the network of the
#  existence and properties of the SLP Directory Agent. You need to ensure
#  that each network segment receives regular DA advertisements. 
#  The best way to do this is through multicast advertising to 
#  address 239.255.255.253. However, if multicast is not enabled to cross 
#  routers, the next best option is to do directed broadcast. 
#
#  DA advertisement should be done regularly but not too frequently because
#  it is unsolicited network traffic. 
#
#   syntax is as follows: 
# da_advert, <type>, <interval>, <target address>, <sending interface>, <mask>
#
# where <type> is one of multicast, broadcast, or unicast ;
# <interval> is the number of seconds between each advertisement; 
# <target address> is the IP address to which the advertisement will be sent ;
# <sending interface> is the IP address from which to send the advertisement;
# <mask> is the IP mask to apply to broadcast advertisements

# next line is a multicast to the SLP group 
da_advert, multicast, 1000, 239.255.255.253, 0.0.0.0
# next line is a directed broadcast to 
#da_advert, broadcast, 1000, 137.69.141.112, 0.0.0.0, 255.255.255.0
# next line is a directed broadcast to 127.69.142.255
#da_advert, broadcast, 1000, 137.69.142.112, 0.0.0.0, 255.255.255.0
# next line is a directed broadcast to 127.69.143.255
#da_advert, broadcast, 1000, 137.69.143.112, 0.0.0.0, 255.255.255.0
# next line is an example of a  unicast advertisement
#da_advert, unicast, 1000, 137.69.141.39, 0.0.0.0


##### Active DA Discovery #####
#
# Active DA discovery allows the DA agent to actively query for other 
# SLP directory agents. 
#
# Active DA discovery can be done more frequently than DA Advertisement
# but also can generate needless traffic if done too frequently. You should
# experiment with the interval for each DA discovery line. 
#
#   syntax is as follows:
# da_disc,  <type>, <interval>, <target address>, <sending interface>, <mask>
# the syntax is the same as for DA Advertisement, above. 
da_disc, multicast, 200, 239.255.255.253, 0.0.0.0
#da_disc, broadcast, 200, 137.69.141.112, 0.0.0.0, 255.255.255.0
#da_disc, broadcast, 200, 137.69.142.112, 0.0.0.0, 255.255.255.0
#da_disc, broadcast, 200, 137.69.143.112, 0.0.0.0, 255.255.255.0

# how many seconds before an inactive TCP connection should be closed 
# NOTE: for mesh operation, this setting must be the same for all
# participants in the mesh. Otherwise they will time the slow
# DA out of the mesh!!
close_conn, 300
#listen, 9.37.98.90


# which port should the l-slp simplified network API operate upon
# you should select an unused port - it should be in the unreserved range 
api_port, 4800

# which port should the SLP DA operate on -- 427 is the default
operational_port, 427

# max time to wait for a complete multicast query response 
mc_max, 15

# how long to wait upon startup to perform DA Discovery
start_wait, 3 

# wait interval before retransmission of multicast or broadcast queries
retry_interval, 2

# time to wait before giving up on unicast message transmission
retry_max, 15

# time between regular multicast da advertisements
da_beat, 10800 

# time between regular multicast active da discovery
da_find, 900

# wait to register services upon passive da discovery
reg_passive, 1

# wait to register services upon active da discovery
reg_active, 1

# not support in this release
slp_mtu, 1458

# time-to-live for multicast messages
slp_ttl, 255

# max message size the DA can process. messages larger than this will
# be discarded. This is a security feature to prevent buffer overruns or
# uncontrolled memory allocation
max_msg, 8192

# not used -- redundant 
# converge_retries, <seconds>

# not used -- redundant
# converge_wait, <seconds>

# file to hold debugging messages -- not recommended right now 
# log_file, <file name>

# not tested yet
# use_syslog <1 or 0>

# not tested yet
# log_stderr < 1 or 0>

# not tested yet
# log_level <1 - 5>

# not completely implemented
# www_file, <file name>

# ip address of the DA - useful to force the DA to live at a 
# specified address on multi-homed hosts
da_addr, 192.168.2.45

# language tag
language, en

#scope list for DA
# format is scopes, <scope0>, <scope1>, <scopeN>
scopes, DEFAULT