1 martin 1.226 //%LICENSE////////////////////////////////////////////////////////////////
|
2 martin 1.227 //
|
3 martin 1.226 // Licensed to The Open Group (TOG) under one or more contributor license
4 // agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
5 // this work for additional information regarding copyright ownership.
6 // Each contributor licenses this file to you under the OpenPegasus Open
7 // Source License; you may not use this file except in compliance with the
8 // License.
|
9 martin 1.227 //
|
10 martin 1.226 // Permission is hereby granted, free of charge, to any person obtaining a
11 // copy of this software and associated documentation files (the "Software"),
12 // to deal in the Software without restriction, including without limitation
13 // the rights to use, copy, modify, merge, publish, distribute, sublicense,
14 // and/or sell copies of the Software, and to permit persons to whom the
15 // Software is furnished to do so, subject to the following conditions:
|
16 martin 1.227 //
|
17 martin 1.226 // The above copyright notice and this permission notice shall be included
18 // in all copies or substantial portions of the Software.
|
19 martin 1.227 //
|
20 martin 1.226 // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
21 martin 1.227 // OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
22 martin 1.226 // MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
23 // IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
24 // CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 // TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 // SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
27 martin 1.227 //
|
28 martin 1.226 //////////////////////////////////////////////////////////////////////////
|
29 mike 1.32 //
30 //%/////////////////////////////////////////////////////////////////////////////
31
32
33 //////////////////////////////////////////////////////////////////////
34 //
|
35 carolann.graves 1.171 // Notes on daemon operation (Unix) and service operation (Win 32):
|
36 mike 1.32 //
|
37 david.dillard 1.165 // To run pegasus as a daemon on Unix platforms:
|
38 mike 1.32 //
|
39 kumpf 1.60 // cimserver
|
40 mike 1.32 //
|
41 kumpf 1.60 // To NOT run pegasus as a daemon on Unix platforms, set the daemon config
42 // property to false:
43 //
44 // cimserver daemon=false
45 //
|
46 kumpf 1.215 // The daemon config property has no effect on windows operation or when
47 // privilege separation is enabled.
|
48 mike 1.32 //
|
49 mike 1.35 // To shutdown pegasus, use the -s option:
|
50 david.dillard 1.165 //
51 // cimserver -s
|
52 mike 1.35 //
|
53 mike 1.32 // To run pegasus as an NT service, there are FOUR different possibilities:
54 //
|
55 david.dillard 1.165 // To INSTALL the Pegasus service,
|
56 mike 1.32 //
57 // cimserver -install
58 //
|
59 david.dillard 1.165 // To REMOVE the Pegasus service,
|
60 mike 1.32 //
61 // cimserver -remove
62 //
|
63 david.dillard 1.165 // To START the Pegasus service,
|
64 mike 1.32 //
65 // net start cimserver
|
66 s.hills 1.117 // or
67 // cimserver -start
|
68 mike 1.32 //
|
69 david.dillard 1.165 // To STOP the Pegasus service,
|
70 mike 1.32 //
71 // net stop cimserver
|
72 s.hills 1.117 // or
73 // cimserver -stop
|
74 mike 1.32 //
|
75 david.dillard 1.165 // Alternatively, you can use the windows service manager. Pegasus shows up
|
76 mike 1.32 // in the service database as "Pegasus CIM Object Manager"
77 //
78 //////////////////////////////////////////////////////////////////////
79
80
|
81 mike 1.35 #include <Pegasus/Common/Config.h>
|
82 kumpf 1.59 #include <Pegasus/Common/Constants.h>
|
83 jim.wunderlich 1.172 #include <Pegasus/Common/PegasusAssert.h>
|
84 mike 1.32 #include <Pegasus/Common/FileSystem.h>
85 #include <Pegasus/Common/PegasusVersion.h>
86 #include <Pegasus/Common/Logger.h>
|
87 denise.eckstein 1.218 #include <Pegasus/Common/StringConversion.h>
|
88 mike 1.32 #include <Pegasus/Common/System.h>
|
89 mike 1.35 #include <Pegasus/Common/Tracer.h>
|
90 kumpf 1.174 #include <Pegasus/Common/LanguageParser.h>
|
91 mike 1.35 #include <Pegasus/Config/ConfigManager.h>
92 #include <Pegasus/Client/CIMClient.h>
|
93 h.sterling 1.153 #include <Pegasus/Server/CIMServer.h>
94 #include <Service/ServerProcess.h>
|
95 kumpf 1.198 #include <Service/ServerShutdownClient.h>
96 #include <Service/ServerRunStatus.h>
|
97 mike 1.32
|
98 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
99 thilo.boehm 1.235 #include <Pegasus/General/SetFileDescriptorToEBCDICEncoding.h>
|
100 thilo.boehm 1.185 #include <Service/ARM_zOS.h>
|
101 marek 1.236 #include <Service/TimeZone_zOS.h>
|
102 thilo.boehm 1.237 #include <Service/WaitForTCPIP_zOS.h>
|
103 marek 1.186 # ifdef PEGASUS_ZOS_SECURITY
104 // This include file will not be provided in the OpenGroup CVS for now.
105 // Do NOT try to include it in your compile
106 # include <Pegasus/Common/safCheckzOS_inline.h>
107 # endif
|
108 thilo.boehm 1.185 #endif
109
|
110 kumpf 1.178 #if defined(PEGASUS_OS_TYPE_UNIX)
|
111 ouyang.jian 1.200 # include <unistd.h>
|
112 kumpf 1.178 # include <sys/types.h>
113 # include <sys/stat.h>
114 # include <fcntl.h>
|
115 mateus.baur 1.175 #endif
116
|
117 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
118 # define PEGASUS_PROCESS_NAME "cimservermain"
119 #else
120 # define PEGASUS_PROCESS_NAME "cimserver"
121 #endif
122
123 #include <Pegasus/Common/Executor.h>
124
|
125 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
126 # include <ILEWrapper/ILEUtilities2.h>
127 # include <ILEWrapper/qumemultiutil.h>
128 #endif
129
|
130 kumpf 1.119 PEGASUS_USING_PEGASUS;
131 PEGASUS_USING_STD;
132
|
133 h.sterling 1.153 //Windows service variables are not defined elsewhere in the product
134 //enable ability to override these
|
135 venkat.puvvada 1.239 #ifndef PEGASUS_FLAVOR
|
136 h.sterling 1.153 #ifndef PEGASUS_SERVICE_NAME
137 #define PEGASUS_SERVICE_NAME "Pegasus CIM Object Manager";
|
138 chuck 1.66 #endif
|
139 h.sterling 1.153 #ifndef PEGASUS_SERVICE_DESCRIPTION
140 #define PEGASUS_SERVICE_DESCRIPTION "Pegasus CIM Object Manager Service";
|
141 mike 1.32 #endif
|
142 venkat.puvvada 1.239 #else
143 #ifndef PEGASUS_SERVICE_NAME
144 #define PEGASUS_SERVICE_NAME PEGASUS_FLAVOR " Pegasus CIM Object Manager"
145 #endif
146 #ifndef PEGASUS_SERVICE_DESCRIPTION
147 #define PEGASUS_SERVICE_DESCRIPTION PEGASUS_FLAVOR \
148 " Pegasus CIM Object Manager Service";
149 #endif
150 #endif
|
151 mike 1.32
|
152 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
153 #include <as400_protos.h> //for _SETCCSID
154 #endif
155
|
156 h.sterling 1.153 class CIMServerProcess : public ServerProcess
157 {
158 public:
159
|
160 kumpf 1.203 CIMServerProcess()
|
161 h.sterling 1.153 {
162 cimserver_set_process(this);
163 }
164
|
165 kumpf 1.203 virtual ~CIMServerProcess()
|
166 h.sterling 1.153 {
167 }
168
169 //defined in PegasusVersion.h
170 virtual const char* getProductName() const
171 {
172 return PEGASUS_PRODUCT_NAME;
173 }
174
175 virtual const char* getExtendedName() const
176 {
177 return PEGASUS_SERVICE_NAME;
178 }
179
180 virtual const char* getDescription() const
181 {
182 return PEGASUS_SERVICE_DESCRIPTION;
183 }
|
184 david.dillard 1.165
|
185 h.sterling 1.153 //defined in PegasusVersion.h
|
186 jim.wunderlich 1.180 virtual const char* getCompleteVersion() const
187 {
|
188 jim.wunderlich 1.181 if (*PEGASUS_PRODUCT_STATUS == '\0' )
|
189 kumpf 1.199 return PEGASUS_PRODUCT_VERSION;
|
190 jim.wunderlich 1.180 else
|
191 kumpf 1.202 return PEGASUS_PRODUCT_VERSION " " PEGASUS_PRODUCT_STATUS;
|
192 jim.wunderlich 1.180 }
193
194 //defined in PegasusVersion.h
|
195 h.sterling 1.153 virtual const char* getVersion() const
196 {
197 return PEGASUS_PRODUCT_VERSION;
198 }
199
200 virtual const char* getProcessName() const
201 {
202 return PEGASUS_PROCESS_NAME;
203 }
204
|
205 kumpf 1.178 int cimserver_run(
206 int argc,
207 char** argv,
208 Boolean shutdownOption,
209 Boolean debugOutputOption);
|
210 h.sterling 1.153
|
211 kumpf 1.203 void cimserver_stop();
|
212 h.sterling 1.153 };
213
|
214 kumpf 1.198 ServerRunStatus _serverRunStatus(
215 PEGASUS_PROCESS_NAME, PEGASUS_CIMSERVER_START_FILE);
|
216 h.sterling 1.153 AutoPtr<CIMServerProcess> _cimServerProcess(new CIMServerProcess());
217 static CIMServer* _cimServer = 0;
|
218 konrad.r 1.166 static Thread* dummyInitialThread = 0;
|
219 kumpf 1.203
|
220 mike 1.35 //
221 // The command name.
222 //
223 static const char COMMAND_NAME [] = "cimserver";
224
225 //
226 // The constant defining usage string.
227 //
228 static const char USAGE [] = "Usage: ";
229
230 /**
231 Constants representing the command line options.
232 */
233 static const char OPTION_VERSION = 'v';
234
235 static const char OPTION_HELP = 'h';
236
237 static const char OPTION_HOME = 'D';
238
239 static const char OPTION_SHUTDOWN = 's';
240
|
241 kumpf 1.203 static const char LONG_HELP[] = "help";
|
242 a.arora 1.142
|
243 kumpf 1.203 static const char LONG_VERSION[] = "version";
|
244 a.arora 1.142
|
245 kumpf 1.178 static const char OPTION_DEBUGOUTPUT = 'X';
|
246 kumpf 1.48
|
247 mike 1.32 /** GetOptions function - This function defines the Options Table
|
248 mike 1.35 and sets up the options from that table using the config manager.
|
249 kumpf 1.198
250 Some possible exceptions: NoSuchFile, FileNotReadable, CannotRenameFile,
251 ConfigFileSyntaxError, UnrecognizedConfigProperty, InvalidPropertyValue,
252 CannotOpenFile.
|
253 mike 1.32 */
254 void GetOptions(
|
255 mike 1.35 ConfigManager* cm,
|
256 mike 1.32 int& argc,
|
257 mateus.baur 1.193 char** argv,
|
258 kumpf 1.198 Boolean shutdownOption)
|
259 mike 1.32 {
|
260 kumpf 1.198 if (shutdownOption)
261 {
262 cm->loadConfigFiles();
263 }
264 else
|
265 mike 1.32 {
|
266 kumpf 1.198 cm->mergeConfigFiles();
267 }
|
268 mateus.baur 1.193
|
269 kumpf 1.198 // Temporarily disable updates to the current configuration
270 // file if shutdownOption is true
271 cm->useConfigFiles = (shutdownOption==false);
|
272 mike 1.33
|
273 kumpf 1.198 cm->mergeCommandLine(argc, argv);
|
274 mateus.baur 1.193
|
275 kumpf 1.198 // Enable updates again
276 cm->useConfigFiles = true;
|
277 mike 1.32 }
278
279 /* PrintHelp - This is temporary until we expand the options manager to allow
280 options help to be defined with the OptionRow entries and presented from
281 those entries.
282 */
283 void PrintHelp(const char* arg0)
284 {
|
285 mike 1.35 String usage = String (USAGE);
|
286 kumpf 1.202 usage.append(COMMAND_NAME);
287 usage.append(" [ [ options ] | [ configProperty=value, ... ] ]\n");
288 usage.append(" options\n");
289 usage.append(" -v, --version - displays CIM Server version number\n");
|
290 denise.eckstein 1.229 usage.append(" --status - displays the running status of"
291 " the CIM Server\n");
|
292 kumpf 1.202 usage.append(" -h, --help - prints this help message\n");
293 usage.append(" -s - shuts down CIM Server\n");
|
294 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
|
295 kumpf 1.202 usage.append(" -D [home] - sets pegasus home directory\n");
|
296 humberto 1.97 #endif
297 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
298 kumpf 1.202 usage.append(" -install [name] - installs pegasus as a Windows "
299 "Service\n");
300 usage.append(" [name] is optional and overrides "
301 "the\n");
302 usage.append(" default CIM Server Service Name\n");
303 usage.append(" by appending [name]\n");
304 usage.append(" -remove [name] - removes pegasus as a Windows "
305 "Service\n");
306 usage.append(" [name] is optional and overrides "
307 "the\n");
308 usage.append(" default CIM Server Service Name\n");
309 usage.append(" by appending [name]\n");
310 usage.append(" -start [name] - starts pegasus as a Windows Service\n");
311 usage.append(" [name] is optional and overrides "
312 "the\n");
313 usage.append(" default CIM Server Service Name\n");
314 usage.append(" by appending [name]\n");
315 usage.append(" -stop [name] - stops pegasus as a Windows Service\n");
316 usage.append(" [name] is optional and overrides "
317 "the\n");
318 usage.append(" default CIM Server Service Name\n");
319 kumpf 1.202 usage.append(" by appending [name]\n\n");
320 #endif
321 usage.append(" configProperty=value\n");
322 usage.append(" - sets CIM Server configuration "
323 "property\n");
|
324 humberto 1.97
325 cout << endl;
|
326 kumpf 1.202 cout << _cimServerProcess->getProductName() << " " <<
327 _cimServerProcess->getCompleteVersion() << endl;
|
328 humberto 1.97 cout << endl;
|
329 david.dillard 1.165
|
330 humberto 1.97 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
331 humberto 1.104 MessageLoaderParms parms("src.Server.cimserver.MENU.WINDOWS", usage);
|
332 kumpf 1.152 #elif defined(PEGASUS_USE_RELEASE_DIRS)
|
333 kumpf 1.202 MessageLoaderParms parms(
334 "src.Server.cimserver.MENU.HPUXLINUXIA64GNU",
335 usage);
|
336 humberto 1.97 #else
|
337 kumpf 1.138 MessageLoaderParms parms("src.Server.cimserver.MENU.STANDARD", usage);
|
338 humberto 1.97 #endif
339 cout << MessageLoader::getMessage(parms) << endl;
|
340 mike 1.35 }
341
|
342 kumpf 1.202 // This needs to be called at various points in the code depending on the
343 // platform and error conditions.
344 // We need to delete the _cimServer reference on exit in order for the
345 // destructors to get called.
|
346 h.sterling 1.156 void deleteCIMServer()
347 {
|
348 kumpf 1.203 delete _cimServer;
349 _cimServer = 0;
|
350 kumpf 1.202
351 if (dummyInitialThread)
352 {
|
353 kumpf 1.199 Thread::clearLanguages();
354 delete dummyInitialThread;
|
355 kumpf 1.202 }
|
356 venkat.puvvada 1.238 _serverRunStatus.setServerNotRunning();
|
357 h.sterling 1.156 }
358
|
359 chuck 1.96 //
360 // Dummy function for the Thread object associated with the initial thread.
361 // Since the initial thread is used to process CIM requests, this is
362 // needed to localize the exceptions thrown during CIM request processing.
|
363 david.dillard 1.165 // Note: This function should never be called!
364 //
|
365 kumpf 1.202 ThreadReturnType PEGASUS_THREAD_CDECL dummyThreadFunc(void* parm)
|
366 chuck 1.96 {
|
367 kumpf 1.202 return (ThreadReturnType)0;
|
368 chuck 1.96 }
369
|
370 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
371
372 static int _extractExecutorSockOpt(int& argc, char**& argv)
373 {
374 // Extract the "--executor-socket <sock>" option if any. This indicates
375 // that the e[x]ecutor is running. The option argument is the socket used
376 // to communicate with the executor. Remove the option from the
377 // argv list and decrease argc by two.
378
379 int sock = -1;
380 const char OPT[] = "--executor-socket";
381
382 for (int i = 1; i < argc; i++)
383 {
384 if (strcmp(argv[i], OPT) == 0)
385 {
386 // Check for missing option argument.
387
388 if (i + 1 == argc)
389 {
390 MessageLoaderParms parms(
391 kumpf 1.199 "src.Server.cimserver.MISSING_OPTION_ARGUMENT",
392 "Missing argument for $0 option.",
393 OPT);
394 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) <<
395 endl;
396 exit(1);
397 }
398
399 // Convert argument to positive integer.
400
401 char* end;
402 unsigned long x = strtoul(argv[i+1], &end, 10);
403
404 // Check whether option argument will fit in a signed integer.
405
406 if (*end != '\0' || x > 2147483647)
407 {
408 MessageLoaderParms parms(
409 "src.Server.cimserver.BAD_OPTION_ARGUMENT",
410 "Bad $0 option argument: $1.",
411 OPT,
412 kumpf 1.199 argv[i+1]);
413 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) <<
414 endl;
415 exit(1);
416 }
417
418 sock = int(x);
419
420 // Remove "-x <sock>" from argv-argc.
421
422 memmove(argv + i, argv + i + 2, sizeof(char*) * (argc - i - 1));
423 argc -= 2;
424 break;
425 }
426 }
427
428 if (sock == -1)
429 {
430 MessageLoaderParms parms(
431 "src.Server.cimserver.MISSING_OPTION",
432 "Missing $0 option.",
433 kumpf 1.199 OPT);
434 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) << endl;
435 exit(1);
436 }
437
438 return sock;
439 }
440
441 #endif /* PEGASUS_ENABLE_PRIVILEGE_SEPARATION */
|
442 mike 1.35
|
443 venkat.puvvada 1.231 static void _initConfigProperty(const String &propName, Uint32 value)
444 {
445 char strValue[22];
446 Uint32 n;
447 const char *startP = Uint32ToString(
448 strValue,
449 value,
450 n);
451 ConfigManager::getInstance()->initCurrentValue(propName, String(startP, n));
452 }
453
|
454 mike 1.33 /////////////////////////////////////////////////////////////////////////
|
455 mike 1.32 // MAIN
456 //////////////////////////////////////////////////////////////////////////
|
457 kumpf 1.199
|
458 mike 1.32 int main(int argc, char** argv)
459 {
|
460 kumpf 1.196 String pegasusHome;
|
461 mike 1.35 Boolean shutdownOption = false;
|
462 kumpf 1.178 Boolean debugOutputOption = false;
|
463 mday 1.47
|
464 kumpf 1.202 // Set Message loading to process locale
465 MessageLoader::_useProcessLocale = true;
|
466 humberto 1.97
|
467 thilo.boehm 1.211 #ifdef PEGASUS_OS_ZOS
468 // Direct standard input to /dev/null,
469 close(STDIN_FILENO);
470 open("/dev/null", O_RDONLY);
471
472 if ( setEBCDICEncoding(STDOUT_FILENO)==-1 ||
473 setEBCDICEncoding(STDERR_FILENO)==-1 )
474 {
|
475 marek 1.220 PEG_TRACE_CSTRING(TRC_SERVER,Tracer::LEVEL1,
|
476 thilo.boehm 1.211 "Coud not set stdout or stderr to EBCDIC encoding.");
477 }
478 // Need to initialize timezone information in the
479 // initial processing thread (IPT)
|
480 marek 1.236 initialize_zOS_timezone();
|
481 thilo.boehm 1.211 #endif
482
|
483 kv.le 1.140 #if defined(PEGASUS_OS_AIX) && defined(PEGASUS_HAS_MESSAGES)
|
484 kumpf 1.202 setlocale(LC_ALL, "");
|
485 kv.le 1.140 #endif
486
|
487 tony 1.82 #ifndef PEGASUS_OS_TYPE_WINDOWS
|
488 kumpf 1.38 //
489 // Get environment variables:
490 //
|
491 kumpf 1.202 # if defined(PEGASUS_OS_AIX) && defined(PEGASUS_USE_RELEASE_DIRS)
|
492 kv.le 1.134 pegasusHome = AIX_RELEASE_PEGASUS_HOME;
|
493 ouyang.jian 1.210 # elif defined(PEGASUS_OS_PASE)
494 const char *tmp = getenv("PEGASUS_HOME");
495 pegasusHome = (tmp == 0) ? PASE_DEFAULT_PEGASUS_HOME : tmp;
|
496 kumpf 1.202 # elif !defined(PEGASUS_USE_RELEASE_DIRS) || \
|
497 r.kieninger 1.223 defined(PEGASUS_OS_ZOS)
|
498 kumpf 1.38 const char* tmp = getenv("PEGASUS_HOME");
499
500 if (tmp)
501 {
502 pegasusHome = tmp;
503 }
|
504 kumpf 1.202 # endif
|
505 kumpf 1.38
506 FileSystem::translateSlashes(pegasusHome);
|
507 tony 1.82 #else
|
508 kumpf 1.38
|
509 kumpf 1.202 // windows only
510 //setHome(pegasusHome);
511 pegasusHome = _cimServerProcess->getHome();
|
512 tony 1.82 #endif
|
513 mike 1.32
|
514 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
515
516 // If invoked with "--executor-socket <socket>" option, then use executor.
517
518 Executor::setSock(_extractExecutorSockOpt(argc, argv));
519
520 // Ping executor to verify the specified socket is valid.
521
522 if (Executor::ping() != 0)
523 {
524 MessageLoaderParms parms("src.Server.cimserver.EXECUTOR_PING_FAILED",
525 "Failed to ping the executor on the specified socket.");
526 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) << endl;
527 exit(1);
528 }
529
530 #endif /* !defined(PEGASUS_ENABLE_PRIVILEGE_SEPARATION) */
531
|
532 denise.eckstein 1.229 // Get help, version, status and shutdown options
|
533 mike 1.35
534 for (int i = 1; i < argc; )
535 {
536 const char* arg = argv[i];
|
537 kumpf 1.216 if (strcmp(arg, "--help") == 0)
|
538 a.arora 1.142 {
|
539 kumpf 1.216 PrintHelp(argv[0]);
540 Executor::daemonizeExecutor();
541 exit(0);
|
542 a.arora 1.142 }
|
543 denise.eckstein 1.229 if (strcmp(arg, "--status") == 0)
544 {
545 int retValue = 0;
546 if (_serverRunStatus.isServerRunning())
547 {
548 MessageLoaderParms parms(
549 "src.Server.cimserver.CIMSERVER_RUNNING",
550 "The CIM Server is running.");
551 cout << MessageLoader::getMessage(parms) << endl;
552 }
553 else
554 {
555 MessageLoaderParms parms(
556 "src.Server.cimserver.CIMSERVER_NOT_RUNNING",
557 "The CIM Server is not running.");
558 cout << MessageLoader::getMessage(parms) << endl;
559 retValue = 2;
560 }
561 Executor::daemonizeExecutor();
562 exit(retValue);
563 }
|
564 kumpf 1.216 else if (strcmp(arg, "--version") == 0)
|
565 a.arora 1.142 {
|
566 jim.wunderlich 1.180 cout << _cimServerProcess->getCompleteVersion() << endl;
|
567 kumpf 1.216 Executor::daemonizeExecutor();
|
568 a.arora 1.142 exit(0);
569 }
|
570 mike 1.35 // Check for -option
|
571 a.arora 1.142 else if (*arg == '-')
|
572 mike 1.35 {
573 // Get the option
574 const char* option = arg + 1;
575
576 //
577 // Check to see if user asked for the version (-v option):
578 //
|
579 tony 1.83 if (*option == OPTION_VERSION &&
580 strlen(option) == 1)
|
581 mike 1.35 {
|
582 jim.wunderlich 1.180 cout << _cimServerProcess->getCompleteVersion() << endl;
|
583 kumpf 1.216 Executor::daemonizeExecutor();
|
584 mike 1.35 exit(0);
585 }
586 //
587 // Check to see if user asked for help (-h option):
588 //
|
589 tony 1.83 else if (*option == OPTION_HELP &&
590 (strlen(option) == 1))
|
591 mike 1.35 {
592 PrintHelp(argv[0]);
|
593 kumpf 1.216 Executor::daemonizeExecutor();
|
594 mike 1.35 exit(0);
595 }
|
596 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
|
597 tony 1.83 else if (*option == OPTION_HOME &&
598 (strlen(option) == 1))
|
599 mike 1.35 {
|
600 kumpf 1.60 if (i + 1 < argc)
|
601 mike 1.35 {
602 pegasusHome.assign(argv[i + 1]);
603 }
604 else
605 {
|
606 humberto 1.99 String opt(option);
|
607 kumpf 1.202 MessageLoaderParms parms(
608 "src.Server.cimserver.MISSING_ARGUMENT",
609 "Missing argument for option -$0",
610 opt);
|
611 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
612 kumpf 1.216 exit(1);
|
613 mike 1.35 }
614
615 memmove(&argv[i], &argv[i + 2], (argc-i-1) * sizeof(char*));
616 argc -= 2;
617 }
|
618 kumpf 1.63 #endif
|
619 kumpf 1.48 //
|
620 kumpf 1.178 // Check to see if user asked for debug output (-X option):
|
621 kumpf 1.48 //
|
622 kumpf 1.178 else if (*option == OPTION_DEBUGOUTPUT &&
|
623 tony 1.83 (strlen(option) == 1))
|
624 kumpf 1.48 {
|
625 kumpf 1.178 MessageLoaderParms parms(
626 "src.Server.cimserver.UNSUPPORTED_DEBUG_OPTION",
627 "Unsupported debug output option is enabled.");
|
628 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
629 kumpf 1.178
630 debugOutputOption = true;
631
632 #if defined(PEGASUS_OS_HPUX)
633 System::bindVerbose = true;
634 #endif
635
|
636 kumpf 1.48 // remove the option from the command line
637 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
638 david.dillard 1.165 argc--;
|
639 kumpf 1.48 }
|
640 mike 1.35 //
641 // Check to see if user asked for shutdown (-s option):
642 //
|
643 tony 1.82 else if (*option == OPTION_SHUTDOWN &&
644 (strlen(option) == 1))
|
645 mike 1.35 {
646 //
|
647 kumpf 1.52 // Check to see if shutdown has already been specified:
|
648 mike 1.35 //
|
649 kumpf 1.52 if (shutdownOption)
|
650 mike 1.35 {
|
651 kumpf 1.202 MessageLoaderParms parms(
652 "src.Server.cimserver.DUPLICATE_SHUTDOWN_OPTION",
653 "Duplicate shutdown option specified.");
|
654 david.dillard 1.165
|
655 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
656 kumpf 1.216 exit(1);
|
657 mike 1.35 }
658
|
659 kumpf 1.52 shutdownOption = true;
|
660 david.dillard 1.165
|
661 mike 1.35 // remove the option from the command line
662 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
663 david.dillard 1.165 argc--;
|
664 mike 1.35 }
665 else
666 i++;
667 }
668 else
669 i++;
|
670 mike 1.32 }
|
671 mike 1.35
|
672 kumpf 1.38 //
673 // Set the value for pegasusHome property
674 //
675 ConfigManager::setPegasusHome(pegasusHome);
|
676 mike 1.32
|
677 mike 1.35 //
|
678 carolann.graves 1.171 // Do the platform specific run
|
679 s.hills 1.117 //
680
|
681 kumpf 1.178 return _cimServerProcess->platform_run(
682 argc, argv, shutdownOption, debugOutputOption);
|
683 s.hills 1.117 }
684
|
685 h.sterling 1.153 void CIMServerProcess::cimserver_stop()
686 {
687 _cimServer->shutdownSignal();
688 }
|
689 s.hills 1.117
690 //
691 // The main, common, running code
692 //
|
693 david.dillard 1.165 // NOTE: Do NOT call exit(). Use return(), otherwise some platforms
|
694 s.hills 1.117 // will fail to shutdown properly/cleanly.
695 //
|
696 david.dillard 1.165 // TODO: Current change minimal for platform "service" shutdown bug fixes.
|
697 carolann.graves 1.171 // Perhaps further extract out common stuff and put into main(), put
|
698 david.dillard 1.165 // daemon stuff into platform specific platform_run(), etc.
699 // Note: make sure to not put error handling stuff that platform
|
700 carolann.graves 1.171 // specific runs may need to deal with better (instead of exit(), etc).
|
701 s.hills 1.117 //
702
|
703 kumpf 1.178 int CIMServerProcess::cimserver_run(
704 int argc,
705 char** argv,
706 Boolean shutdownOption,
707 Boolean debugOutputOption)
|
708 s.hills 1.117 {
709 Boolean daemonOption = false;
710
|
711 ouyang.jian 1.206 #if defined (PEGASUS_OS_PASE) && !defined (PEGASUS_DEBUG)
712 // PASE have itself regular for checking privileged user
713 if (!System::isPrivilegedUser("*CURRENT "))
714 {
715 MessageLoaderParms parms(
716 "src.Server.cimserver.NO_AUTHORITY.PEGASUS_OS_PASE",
717 "The caller should be a privileged user,"
718 " or the server will not run.");
719 cerr << MessageLoader::getMessage(parms) << endl;
720 exit (1);
721 }
722 char jobName[11];
723 // this function only can be found in PASE environment
724 umeGetJobName(jobName, false);
725 if (strncmp("QUMECIMOM ", jobName, 10) != 0
726 && strncmp("QUMEENDCIM", jobName, 10) != 0)
727 {
728 MessageLoaderParms parms(
729 "src.Server.cimserver.NOT_OFFICIAL_START.PEGASUS_OS_PASE",
730 "cimserver can not be started by user.\nServer will not run.");
731 cerr << MessageLoader::getMessage(parms) << endl;
732 ouyang.jian 1.206 exit (1);
733 }
734
|
735 kumpf 1.228 // Direct standard input, output, and error to /dev/null,
|
736 ouyang.jian 1.206 // PASE run this job in background, any output in not allowed
737 freopen("/dev/null", "r", stdin);
738 freopen("/dev/null", "w", stdout);
739 freopen("/dev/null", "w", stderr);
740 #endif
741
|
742 s.hills 1.117 //
|
743 mike 1.35 // Get an instance of the Config Manager.
744 //
|
745 kumpf 1.203 ConfigManager* configManager = ConfigManager::getInstance();
|
746 kumpf 1.136 configManager->useConfigFiles = true;
|
747 mike 1.35
|
748 mike 1.32 try
749 {
|
750 kumpf 1.203 //
751 // Get options (from command line and from configuration file); this
752 // removes corresponding options and their arguments from the command
753 // line. NOTE: If shutdownOption=true, the contents of current config
754 // file are not overwritten by the planned config file.
755 //
|
756 mateus.baur 1.193 GetOptions(configManager, argc, argv, shutdownOption);
|
757 kumpf 1.127
|
758 kumpf 1.203 //
759 // Initialize the message home directory in the MessageLoader.
760 // This is the default directory where the resource bundles are found.
761 //
762 MessageLoader::setPegasusMsgHome(ConfigManager::getHomedPath(
763 ConfigManager::getInstance()->getCurrentValue("messageDir")));
|
764 kumpf 1.86
|
765 ouyang.jian 1.224 #if !defined(PEGASUS_USE_SYSLOGS)
766 String logsDirectory = ConfigManager::getHomedPath(
767 configManager->getCurrentValue("logdir"));
768
769 // Set up the Logger. This does not open the logs.
770 // Might be more logical to clean before set.
771 Logger::setHomeDirectory(logsDirectory);
772 #endif
773
774
|
775 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
|
776 ouyang.jian 1.224 /* write job log to tell where pegasus log is.*/
777 if(logsDirectory.size() > 0)
778 // this function only can be found in PASE environment
779 logPegasusDir2joblog(logsDirectory.getCString());
780 else
781 logPegasusDir2joblog(".");
782
783 // set ccsid to unicode for entire job
784 // ccsid is globolization mechanism in PASE environment
785 if (_SETCCSID(1208) == -1)
786 {
787 MessageLoaderParms parms(
788 "src.Server.cimserver.SET_CCSID_ERROR.PEGASUS_OS_PASE",
789 "Failed to set CCSID, server will stop.");
790 cerr << MessageLoader::getMessage(parms) << endl;
791 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::FATAL,
792 parms);
793 exit (1);
794 }
|
795 ouyang.jian 1.206
|
796 ouyang.jian 1.224 char fullJobName[29];
797 umeGetJobName(fullJobName, true);
798 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
799 Logger::INFORMATION,
800 MessageLoaderParms(
801 "src.Server.cimserver.SERVER_JOB_NAME.PEGASUS_OS_PASE",
802 "CIM Server's Job Name is: $0", fullJobName));
|
803 ouyang.jian 1.206 #endif
804
|
805 kumpf 1.221 #ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
806 // Make sure at least one connection is enabled
|
807 ouyang.jian 1.206
|
808 kumpf 1.221 Boolean enableHttpConnection = ConfigManager::parseBooleanValue(
809 configManager->getCurrentValue("enableHttpConnection"));
810 Boolean enableHttpsConnection = ConfigManager::parseBooleanValue(
811 configManager->getCurrentValue("enableHttpsConnection"));
812
813 if (!enableHttpConnection && !enableHttpsConnection)
814 {
815 MessageLoaderParms parms(
|
816 ouyang.jian 1.206 "src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
817 "Neither HTTP nor HTTPS connection is enabled."
|
818 kumpf 1.221 " CIMServer will not be started.");
|
819 kumpf 1.222 Logger::put_l(
820 Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
821 parms);
|
822 kumpf 1.221 cerr << MessageLoader::getMessage(parms) << endl;
823 return 1;
824 }
|
825 ouyang.jian 1.206 #endif
|
826 kumpf 1.221
|
827 mike 1.35 //
|
828 kumpf 1.187 // Check to see if we should start Pegasus as a daemon
|
829 mike 1.35 //
|
830 kumpf 1.187 daemonOption = ConfigManager::parseBooleanValue(
831 configManager->getCurrentValue("daemon"));
|
832 david.dillard 1.165
|
833 kumpf 1.215 if ((Executor::detectExecutor() == 0) && (daemonOption == false))
834 {
835 MessageLoaderParms parms(
836 "src.Server.cimserver.PRIVSEP_REQUIRES_DAEMON",
837 "Warning: The configuration setting daemon=false is ignored "
838 "with privilege separation enabled.");
839 cerr << MessageLoader::getMessage(parms) << endl;
840 daemonOption = true;
841 }
842
|
843 kumpf 1.36 //
|
844 david.dillard 1.165 // Check to see if we need to shutdown CIMOM
|
845 mike 1.35 //
846 if (shutdownOption)
847 {
|
848 r.kieninger 1.240 #if defined(PEGASUS_OS_ZOS) && defined(PEGASUS_ZOS_SECURITY)
849 // This checks whether user is authorized to stop the
850 // CIM Server. When unauthorized a message is logged to
851 // to the user and program exits.
852 shutdownCheckProfileCIMSERVclassWBEM();
853 // Depending on the success of the previous check we may not
854 // reach this code!!!
855 #endif
|
856 david.dillard 1.165 String configTimeout =
|
857 kumpf 1.60 configManager->getCurrentValue("shutdownTimeout");
|
858 kumpf 1.202 Uint32 timeoutValue =
859 strtol(configTimeout.getCString(), (char **)0, 10);
|
860 david.dillard 1.165
|
861 kumpf 1.198 ServerShutdownClient serverShutdownClient(&_serverRunStatus);
862 serverShutdownClient.shutdown(timeoutValue);
|
863 kumpf 1.45
|
864 kumpf 1.198 MessageLoaderParms parms(
865 "src.Server.cimserver.SERVER_STOPPED",
866 "CIM Server stopped.");
|
867 humberto 1.106
|
868 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
869 kumpf 1.202 return 0;
|
870 mike 1.35 }
|
871 mike 1.32
|
872 kumpf 1.198 #if defined(PEGASUS_DEBUG) && !defined(PEGASUS_USE_SYSLOGS)
|
873 kumpf 1.36 // Leave this in until people get familiar with the logs.
|
874 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.LOGS_DIRECTORY",
|
875 h.sterling 1.153 "Logs Directory = ");
|
876 humberto 1.97 cout << MessageLoader::getMessage(parms) << logsDirectory << endl;
|
877 kumpf 1.57 #endif
|
878 mike 1.32 }
|
879 kumpf 1.203 catch (Exception& e)
|
880 mike 1.32 {
|
881 kumpf 1.203 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
882 "cimserver not started: $0", e.getMessage());
|
883 kumpf 1.222 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
884 parms);
|
885 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
886
887 return 1;
|
888 marek 1.186 }
|
889 david 1.85
|
890 thilo.boehm 1.237 #if defined(PEGASUS_OS_ZOS)
891 # if defined(PEGASUS_ZOS_SECURITY)
|
892 marek 1.186 startupCheckBPXServer(true);
893 startupCheckProfileCIMSERVclassWBEM();
894 startupEnableMSC();
|
895 thilo.boehm 1.237 # endif
896 startupWaitForTCPIP();
|
897 david 1.85 #endif
|
898 mike 1.32
|
899 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
900 mike 1.32 // Put out startup up message.
|
901 kumpf 1.202 cout << _cimServerProcess->getProductName() << " " <<
902 _cimServerProcess->getCompleteVersion() << endl;
|
903 humberto 1.97 #endif
904
|
905 kumpf 1.202 // reset message loading to NON-process locale
906 MessageLoader::_useProcessLocale = false;
|
907 mike 1.32
|
908 kumpf 1.137 // Get the parent's PID before forking
|
909 kumpf 1.198 _serverRunStatus.setParentPid(System::getPID());
|
910 david.dillard 1.165
|
911 kumpf 1.202 // Do not fork when using privilege separation (executor will daemonize
912 // itself later).
|
913 kumpf 1.63 if (daemonOption)
914 {
|
915 kumpf 1.202 if (-1 == _cimServerProcess->cimserver_fork())
916 return -1;
|
917 kumpf 1.63 }
|
918 chuck 1.66
|
919 chuck 1.96 // Now we are after the fork...
920 // Create a dummy Thread object that can be used to store the
|
921 kumpf 1.176 // AcceptLanguageList object for CIM requests that are serviced
|
922 chuck 1.96 // by this thread (initial thread of server). Need to do this
923 // because this thread is not in a ThreadPool, but is used
924 // to service CIM requests.
925 // The run function for the dummy Thread should never be called,
|
926 konrad.r 1.166 dummyInitialThread = new Thread(dummyThreadFunc, NULL, false);
|
927 david.dillard 1.165 Thread::setCurrent(dummyInitialThread);
|
928 kumpf 1.202 try
929 {
|
930 kumpf 1.214 Thread::setLanguages(LanguageParser::getDefaultAcceptLanguages());
|
931 kumpf 1.202 }
932 catch (InvalidAcceptLanguageHeader& e)
933 {
|
934 kumpf 1.203 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
|
935 kumpf 1.222 MessageLoaderParms(
936 "src.Server.cimserver.FAILED_TO_SET_PROCESS_LOCALE",
937 "Could not convert the system process locale into a valid "
938 "AcceptLanguage format."));
|
939 kumpf 1.203 Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
940 e.getMessage());
|
941 humberto 1.108 }
|
942 david.dillard 1.165
|
943 kumpf 1.167 #ifndef PEGASUS_OS_TYPE_WINDOWS
944 umask(S_IRWXG|S_IRWXO);
945 #endif
|
946 mday 1.62
|
947 kumpf 1.203 // Start up the CIM Server
|
948 mateus.baur 1.175
|
949 kumpf 1.203 try
950 {
|
951 mateus.baur 1.175 #if defined(PEGASUS_OS_TYPE_UNIX)
|
952 kumpf 1.203 //
953 // Lock the CIMSERVER_LOCK_FILE during CIM Server start-up to prevent
954 // concurrent writes to this file by multiple cimserver processes
955 // starting at the same time.
956 //
957 CString startupLockFileName = ConfigManager::getHomedPath(
|
958 kumpf 1.204 PEGASUS_CIMSERVER_START_LOCK_FILE).getCString();
|
959 kumpf 1.203
960 // Make sure the start-up lock file exists
961 FILE* startupLockFile;
962 if ((startupLockFile = fopen(startupLockFileName, "w")) != 0)
963 {
964 fclose(startupLockFile);
965 }
|
966 kumpf 1.202
|
967 kumpf 1.203 AutoFileLock fileLock(startupLockFileName);
968 #endif
|
969 kumpf 1.202
|
970 kumpf 1.203 #if defined(PEGASUS_OS_TYPE_UNIX) || defined(PEGASUS_OS_VMS)
971 //
972 // Check if a CIM Server is already running. If so, print an error
973 // message and notify the parent process (if there is one) to terminate
974 //
975 if (_serverRunStatus.isServerRunning())
976 {
977 MessageLoaderParms parms(
978 "src.Server.cimserver.UNABLE_TO_START_SERVER_ALREADY_RUNNING",
979 "Unable to start CIMServer. CIMServer is already running.");
|
980 kumpf 1.222 Logger::put_l(
|
981 kumpf 1.203 Logger::ERROR_LOG, System::CIMSERVER, Logger::INFORMATION,
|
982 kumpf 1.222 parms);
|
983 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
984 mateus.baur 1.175
|
985 kumpf 1.203 if (daemonOption)
986 {
987 _cimServerProcess->notify_parent(1);
988 }
|
989 kumpf 1.79
|
990 kumpf 1.203 return 1;
991 }
|
992 kumpf 1.79
|
993 kumpf 1.198 //
|
994 kumpf 1.203 // Declare ourselves as the running CIM Server process, and write our
995 // PID to the PID file.
|
996 kumpf 1.79 //
|
997 kumpf 1.203 _serverRunStatus.setServerRunning();
998 #endif
999
1000 // Create and initialize the CIMServer object
1001
1002 _cimServer = new CIMServer();
1003
1004 Boolean enableHttpConnection = ConfigManager::parseBooleanValue(
1005 configManager->getCurrentValue("enableHttpConnection"));
1006 Boolean enableHttpsConnection = ConfigManager::parseBooleanValue(
1007 configManager->getCurrentValue("enableHttpsConnection"));
1008
1009 #ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
1010 // Make sure at least one connection is enabled
1011 if (!enableHttpConnection && !enableHttpsConnection)
|
1012 kumpf 1.198 {
|
1013 kumpf 1.203 MessageLoaderParms parms(
1014 "src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
1015 "Neither HTTP nor HTTPS connection is enabled.");
1016 throw Exception(parms);
|
1017 kumpf 1.198 }
|
1018 kumpf 1.63 #endif
|
1019 kumpf 1.51
|
1020 venkat.puvvada 1.208 Boolean addIP6Acceptor = false;
1021 Boolean addIP4Acceptor = false;
1022
1023 #ifdef PEGASUS_OS_TYPE_WINDOWS
1024 addIP4Acceptor = true;
1025 #endif
1026
1027 #ifdef PEGASUS_ENABLE_IPV6
1028 // If IPv6 stack is disabled swicth to IPv4 stack.
1029 if (System::isIPv6StackActive())
1030 {
1031 addIP6Acceptor = true;
1032 }
1033 else
1034 {
|
1035 marek 1.233 PEG_TRACE_CSTRING(TRC_SERVER,Tracer::LEVEL4,
|
1036 venkat.puvvada 1.208 "IPv6 stack is not active, using IPv4 socket.");
1037 }
1038 #endif
1039 if (!addIP6Acceptor)
1040 {
1041 addIP4Acceptor = true;
1042 }
1043
|
1044 kumpf 1.203 // The server HTTP and HTTPS ports are determined via this algorithm:
1045 // 1) If the user explicitly specified a port, use it.
1046 // 2) If the user did not specify a port, get the port from the
1047 // services file.
1048 // 3) If no value is specified in the services file, use the IANA WBEM
1049 // default port.
1050 // Note that 2 and 3 are done within the System::lookupPort method
1051 // An empty string from the ConfigManager implies that the user did not
1052 // specify a port.
|
1053 kumpf 1.41
|
1054 kumpf 1.86 if (enableHttpConnection)
1055 {
|
1056 kumpf 1.203 Uint32 portNumberHttp = 0;
1057 String httpPort = configManager->getCurrentValue("httpPort");
1058 if (httpPort == String::EMPTY)
1059 {
1060 //
1061 // Look up the WBEM-HTTP port number
1062 //
1063 portNumberHttp = System::lookupPort(
1064 WBEM_HTTP_SERVICE_NAME, WBEM_DEFAULT_HTTP_PORT);
|
1065 venkat.puvvada 1.231 _initConfigProperty("httpPort", portNumberHttp);
|
1066 kumpf 1.203 }
1067 else
1068 {
1069 //
1070 // user-specified
1071 //
1072 CString portString = httpPort.getCString();
1073 char* end = 0;
1074 portNumberHttp = strtol(portString, &end, 10);
1075 if (!(end != 0 && *end == '\0'))
1076 {
1077 throw InvalidPropertyValue("httpPort", httpPort);
1078 }
1079 }
1080
|
1081 venkat.puvvada 1.208 if (addIP6Acceptor)
1082 {
1083 _cimServer->addAcceptor(HTTPAcceptor::IPV6_CONNECTION,
1084 portNumberHttp, false);
1085 }
1086 if (addIP4Acceptor)
1087 {
1088 _cimServer->addAcceptor(HTTPAcceptor::IPV4_CONNECTION,
1089 portNumberHttp, false);
1090 }
|
1091 denise.eckstein 1.225 // The port number is converted to a string to avoid the
1092 // addition of localized characters (e.g., "5,988").
|
1093 denise.eckstein 1.218 char scratchBuffer[22];
1094 Uint32 n;
1095 const char * portNumberHttpStr = Uint32ToString(
|
1096 kumpf 1.228 scratchBuffer, portNumberHttp, n);
|
1097 kumpf 1.203 MessageLoaderParms parms(
|
1098 kumpf 1.198 "src.Server.cimserver.LISTENING_ON_HTTP_PORT",
|
1099 denise.eckstein 1.218 "Listening on HTTP port $0.", portNumberHttpStr);
|
1100 kumpf 1.222 Logger::put_l(
|
1101 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1102 kumpf 1.222 parms);
|
1103 kumpf 1.203 #if defined(PEGASUS_DEBUG)
1104 cout << MessageLoader::getMessage(parms) << endl;
1105 #endif
|
1106 kumpf 1.86 }
|
1107 kumpf 1.198
|
1108 kumpf 1.86 if (enableHttpsConnection)
1109 {
|
1110 kumpf 1.203 Uint32 portNumberHttps = 0;
1111 String httpsPort = configManager->getCurrentValue("httpsPort");
1112 if (httpsPort == String::EMPTY)
1113 {
1114 //
1115 // Look up the WBEM-HTTPS port number
1116 //
1117 portNumberHttps = System::lookupPort(
1118 WBEM_HTTPS_SERVICE_NAME, WBEM_DEFAULT_HTTPS_PORT);
|
1119 venkat.puvvada 1.231 _initConfigProperty("httpsPort", portNumberHttps);
|
1120 kumpf 1.203 }
1121 else
1122 {
1123 //
1124 // user-specified
1125 //
1126 CString portString = httpsPort.getCString();
1127 char* end = 0;
1128 portNumberHttps = strtol(portString, &end, 10);
1129 if (!(end != 0 && *end == '\0'))
1130 {
1131 throw InvalidPropertyValue("httpsPort", httpsPort);
1132 }
1133 }
|
1134 venkat.puvvada 1.208 if (addIP6Acceptor)
|
1135 kumpf 1.228 {
|
1136 venkat.puvvada 1.208 _cimServer->addAcceptor(HTTPAcceptor::IPV6_CONNECTION,
1137 portNumberHttps, true);
1138 }
1139 if (addIP4Acceptor)
1140 {
1141 _cimServer->addAcceptor(HTTPAcceptor::IPV4_CONNECTION,
1142 portNumberHttps, true);
1143 }
|
1144 denise.eckstein 1.225 // The port number is converted to a string to avoid the
1145 // addition of localized characters (e.g., "5,989").
|
1146 denise.eckstein 1.218 char scratchBuffer[22];
1147 Uint32 n;
1148 const char * portNumberHttpsStr = Uint32ToString(
|
1149 kumpf 1.228 scratchBuffer, portNumberHttps, n);
|
1150 kumpf 1.203 MessageLoaderParms parms(
|
1151 kumpf 1.198 "src.Server.cimserver.LISTENING_ON_HTTPS_PORT",
|
1152 denise.eckstein 1.218 "Listening on HTTPS port $0.", portNumberHttpsStr);
|
1153 kumpf 1.222 Logger::put_l(
|
1154 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1155 kumpf 1.222 parms);
|
1156 kumpf 1.203 #if defined(PEGASUS_DEBUG)
1157 cout << MessageLoader::getMessage(parms) << endl;
1158 #endif
|
1159 kumpf 1.86 }
|
1160 kumpf 1.135
|
1161 h.sterling 1.159 #ifndef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
|
1162 kumpf 1.203 {
|
1163 dave.sudlik 1.205 _cimServer->addAcceptor(HTTPAcceptor::LOCAL_CONNECTION, 0, false);
|
1164 kumpf 1.86
|
1165 kumpf 1.198 MessageLoaderParms parms(
|
1166 kumpf 1.203 "src.Server.cimserver.LISTENING_ON_LOCAL",
1167 "Listening on local connection socket.");
|
1168 kumpf 1.222 Logger::put_l(
|
1169 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1170 kumpf 1.222 parms);
|
1171 kumpf 1.203 # if defined(PEGASUS_DEBUG)
|
1172 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
1173 kumpf 1.203 # endif
|
1174 kumpf 1.86 }
|
1175 david 1.85 #endif
|
1176 mike 1.35
|
1177 kumpf 1.198 _cimServer->bind();
|
1178 kumpf 1.199
|
1179 kumpf 1.198 // notify parent process (if there is a parent process) to terminate
|
1180 konrad.r 1.95 // so user knows that there is cimserver ready to serve CIM requests.
|
1181 kumpf 1.198 if (daemonOption)
1182 {
1183 _cimServerProcess->notify_parent(0);
1184 }
|
1185 mike 1.35
|
1186 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1187 kumpf 1.202 cout << "Started. " << endl;
|
1188 kumpf 1.63 #endif
|
1189 david.dillard 1.165
|
1190 kumpf 1.54 // Put server started message to the logger
|
1191 kumpf 1.143 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
1192 Logger::INFORMATION,
|
1193 kumpf 1.222 MessageLoaderParms(
1194 "src.Server.cimserver.STARTED_VERSION",
1195 "Started $0 version $1.",
1196 _cimServerProcess->getProductName(),
1197 _cimServerProcess->getCompleteVersion()));
|
1198 kumpf 1.45
|
1199 marek 1.190 #if defined(PEGASUS_OS_TYPE_UNIX) && !defined(PEGASUS_OS_ZOS)
|
1200 kumpf 1.178 if (daemonOption && !debugOutputOption)
|
1201 kumpf 1.202 {
|
1202 kumpf 1.178 // Direct standard input, output, and error to /dev/null,
1203 // since we are running as a daemon.
|
1204 thilo.boehm 1.211 close(STDIN_FILENO);
|
1205 kumpf 1.178 open("/dev/null", O_RDONLY);
|
1206 thilo.boehm 1.211 close(STDOUT_FILENO);
|
1207 kumpf 1.178 open("/dev/null", O_RDWR);
|
1208 thilo.boehm 1.211 close(STDERR_FILENO);
|
1209 kumpf 1.178 open("/dev/null", O_RDWR);
1210 }
1211 #endif
|
1212 kumpf 1.203 }
1213 catch (Exception& e)
1214 {
1215 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
1216 "cimserver not started: $0", e.getMessage());
|
1217 kumpf 1.222 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1218 parms);
|
1219 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
1220 kumpf 1.178
|
1221 s.kodali 1.234 deleteCIMServer();
1222
|
1223 kumpf 1.203 //
1224 // notify parent process (if there is a parent process) to terminate
1225 //
1226 if (daemonOption)
1227 _cimServerProcess->notify_parent(1);
1228
1229 return 1;
1230 }
1231
1232 // Run the main CIM Server loop
1233
1234 try
1235 {
|
1236 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
1237 thilo.boehm 1.185
|
1238 kumpf 1.202 // ARM is a z/OS internal restart facility.
1239 // This is a z/OS specific change.
|
1240 thilo.boehm 1.185
1241 // Instatiating the automatic restart manager for zOS
1242 ARM_zOS automaticRestartManager;
1243
1244 // register to zOS ARM
1245 automaticRestartManager.Register();
1246
1247 #endif
1248
|
1249 marek 1.217 #ifdef PEGASUS_ENABLE_SLP
1250 _cimServer->startSLPProvider();
|
1251 kumpf 1.228 #endif
|
1252 venkat.puvvada 1.232 _cimServer->initComplete();
1253
|
1254 mike 1.35 //
1255 // Loop to call CIMServer's runForever() method until CIMServer
1256 // has been shutdown
1257 //
|
1258 kumpf 1.202 while (!_cimServer->terminated())
1259 {
1260 _cimServer->runForever();
1261 }
|
1262 carson.hovey 1.157
|
1263 kumpf 1.45 //
1264 // normal termination
|
1265 carson.hovey 1.157 //
|
1266 kumpf 1.203
|
1267 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
1268 thilo.boehm 1.185
|
1269 kumpf 1.202 // ARM is a z/OS internal restart facility.
1270 // This is a z/OS specific change.
|
1271 thilo.boehm 1.185
1272 // register to zOS ARM
1273 automaticRestartManager.DeRegister();
1274
1275 #endif
|
1276 kumpf 1.143
|
1277 kumpf 1.54 // Put server shutdown message to the logger
|
1278 kumpf 1.222 Logger::put_l(
1279 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1280 MessageLoaderParms(
1281 "src.Server.cimserver.STOPPED",
1282 "$0 stopped.", _cimServerProcess->getProductName()));
|
1283 mike 1.32 }
|
1284 kumpf 1.202 catch (Exception& e)
|
1285 marek 1.195 {
|
1286 kumpf 1.202 MessageLoaderParms parms(
|
1287 marek 1.195 "src.Server.cimserver.ERROR",
|
1288 kumpf 1.202 "Error: $0",
1289 e.getMessage());
|
1290 kumpf 1.222 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
1291 parms);
|
1292 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
1293 marek 1.195
1294 deleteCIMServer();
1295 return 1;
1296 }
|
1297 mike 1.32
|
1298 h.sterling 1.156 deleteCIMServer();
|
1299 mike 1.32 return 0;
1300 }
|
Return to
cimserver.cpp
CVS log
Up to [Pegasus] / pegasus / src / Server