1 martin 1.226 //%LICENSE////////////////////////////////////////////////////////////////
|
2 martin 1.227 //
|
3 martin 1.226 // Licensed to The Open Group (TOG) under one or more contributor license
4 // agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
5 // this work for additional information regarding copyright ownership.
6 // Each contributor licenses this file to you under the OpenPegasus Open
7 // Source License; you may not use this file except in compliance with the
8 // License.
|
9 martin 1.227 //
|
10 martin 1.226 // Permission is hereby granted, free of charge, to any person obtaining a
11 // copy of this software and associated documentation files (the "Software"),
12 // to deal in the Software without restriction, including without limitation
13 // the rights to use, copy, modify, merge, publish, distribute, sublicense,
14 // and/or sell copies of the Software, and to permit persons to whom the
15 // Software is furnished to do so, subject to the following conditions:
|
16 martin 1.227 //
|
17 martin 1.226 // The above copyright notice and this permission notice shall be included
18 // in all copies or substantial portions of the Software.
|
19 martin 1.227 //
|
20 martin 1.226 // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
21 martin 1.227 // OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
22 martin 1.226 // MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
23 // IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
24 // CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 // TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 // SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
27 martin 1.227 //
|
28 martin 1.226 //////////////////////////////////////////////////////////////////////////
|
29 mike 1.32 //
30 //%/////////////////////////////////////////////////////////////////////////////
31
32
33 //////////////////////////////////////////////////////////////////////
34 //
|
35 carolann.graves 1.171 // Notes on daemon operation (Unix) and service operation (Win 32):
|
36 mike 1.32 //
|
37 david.dillard 1.165 // To run pegasus as a daemon on Unix platforms:
|
38 mike 1.32 //
|
39 kumpf 1.60 // cimserver
|
40 mike 1.32 //
|
41 kumpf 1.60 // To NOT run pegasus as a daemon on Unix platforms, set the daemon config
42 // property to false:
43 //
44 // cimserver daemon=false
45 //
|
46 kumpf 1.215 // The daemon config property has no effect on windows operation or when
47 // privilege separation is enabled.
|
48 mike 1.32 //
|
49 mike 1.35 // To shutdown pegasus, use the -s option:
|
50 david.dillard 1.165 //
51 // cimserver -s
|
52 mike 1.35 //
|
53 mike 1.32 // To run pegasus as an NT service, there are FOUR different possibilities:
54 //
|
55 david.dillard 1.165 // To INSTALL the Pegasus service,
|
56 mike 1.32 //
57 // cimserver -install
58 //
|
59 david.dillard 1.165 // To REMOVE the Pegasus service,
|
60 mike 1.32 //
61 // cimserver -remove
62 //
|
63 david.dillard 1.165 // To START the Pegasus service,
|
64 mike 1.32 //
65 // net start cimserver
|
66 s.hills 1.117 // or
67 // cimserver -start
|
68 mike 1.32 //
|
69 david.dillard 1.165 // To STOP the Pegasus service,
|
70 mike 1.32 //
71 // net stop cimserver
|
72 s.hills 1.117 // or
73 // cimserver -stop
|
74 mike 1.32 //
|
75 david.dillard 1.165 // Alternatively, you can use the windows service manager. Pegasus shows up
|
76 mike 1.32 // in the service database as "Pegasus CIM Object Manager"
77 //
78 //////////////////////////////////////////////////////////////////////
79
80
|
81 mike 1.35 #include <Pegasus/Common/Config.h>
|
82 kumpf 1.59 #include <Pegasus/Common/Constants.h>
|
83 jim.wunderlich 1.172 #include <Pegasus/Common/PegasusAssert.h>
|
84 mike 1.32 #include <Pegasus/Common/FileSystem.h>
85 #include <Pegasus/Common/PegasusVersion.h>
86 #include <Pegasus/Common/Logger.h>
|
87 denise.eckstein 1.218 #include <Pegasus/Common/StringConversion.h>
|
88 mike 1.32 #include <Pegasus/Common/System.h>
|
89 mike 1.35 #include <Pegasus/Common/Tracer.h>
|
90 kumpf 1.174 #include <Pegasus/Common/LanguageParser.h>
|
91 mike 1.35 #include <Pegasus/Config/ConfigManager.h>
92 #include <Pegasus/Client/CIMClient.h>
|
93 h.sterling 1.153 #include <Pegasus/Server/CIMServer.h>
94 #include <Service/ServerProcess.h>
|
95 kumpf 1.198 #include <Service/ServerShutdownClient.h>
96 #include <Service/ServerRunStatus.h>
|
97 mike 1.32
|
98 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
99 thilo.boehm 1.235 #include <Pegasus/General/SetFileDescriptorToEBCDICEncoding.h>
|
100 thilo.boehm 1.185 #include <Service/ARM_zOS.h>
|
101 marek 1.236 #include <Service/TimeZone_zOS.h>
|
102 thilo.boehm 1.237 #include <Service/WaitForTCPIP_zOS.h>
|
103 marek 1.186 # ifdef PEGASUS_ZOS_SECURITY
104 // This include file will not be provided in the OpenGroup CVS for now.
105 // Do NOT try to include it in your compile
106 # include <Pegasus/Common/safCheckzOS_inline.h>
107 # endif
|
108 thilo.boehm 1.185 #endif
109
|
110 kumpf 1.178 #if defined(PEGASUS_OS_TYPE_UNIX)
|
111 ouyang.jian 1.200 # include <unistd.h>
|
112 kumpf 1.178 # include <sys/types.h>
113 # include <sys/stat.h>
114 # include <fcntl.h>
|
115 mateus.baur 1.175 #endif
116
|
117 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
118 # define PEGASUS_PROCESS_NAME "cimservermain"
119 #else
120 # define PEGASUS_PROCESS_NAME "cimserver"
121 #endif
122
123 #include <Pegasus/Common/Executor.h>
124
|
125 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
126 # include <ILEWrapper/ILEUtilities2.h>
127 # include <ILEWrapper/qumemultiutil.h>
128 #endif
129
|
130 kumpf 1.119 PEGASUS_USING_PEGASUS;
131 PEGASUS_USING_STD;
132
|
133 h.sterling 1.153 //Windows service variables are not defined elsewhere in the product
134 //enable ability to override these
135 #ifndef PEGASUS_SERVICE_NAME
136 #define PEGASUS_SERVICE_NAME "Pegasus CIM Object Manager";
|
137 chuck 1.66 #endif
|
138 h.sterling 1.153 #ifndef PEGASUS_SERVICE_DESCRIPTION
139 #define PEGASUS_SERVICE_DESCRIPTION "Pegasus CIM Object Manager Service";
|
140 mike 1.32 #endif
141
|
142 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
143 #include <as400_protos.h> //for _SETCCSID
144 #endif
145
|
146 h.sterling 1.153 class CIMServerProcess : public ServerProcess
147 {
148 public:
149
|
150 kumpf 1.203 CIMServerProcess()
|
151 h.sterling 1.153 {
152 cimserver_set_process(this);
153 }
154
|
155 kumpf 1.203 virtual ~CIMServerProcess()
|
156 h.sterling 1.153 {
157 }
158
159 //defined in PegasusVersion.h
160 virtual const char* getProductName() const
161 {
162 return PEGASUS_PRODUCT_NAME;
163 }
164
165 virtual const char* getExtendedName() const
166 {
167 return PEGASUS_SERVICE_NAME;
168 }
169
170 virtual const char* getDescription() const
171 {
172 return PEGASUS_SERVICE_DESCRIPTION;
173 }
|
174 david.dillard 1.165
|
175 h.sterling 1.153 //defined in PegasusVersion.h
|
176 jim.wunderlich 1.180 virtual const char* getCompleteVersion() const
177 {
|
178 jim.wunderlich 1.181 if (*PEGASUS_PRODUCT_STATUS == '\0' )
|
179 kumpf 1.199 return PEGASUS_PRODUCT_VERSION;
|
180 jim.wunderlich 1.180 else
|
181 kumpf 1.202 return PEGASUS_PRODUCT_VERSION " " PEGASUS_PRODUCT_STATUS;
|
182 jim.wunderlich 1.180 }
183
184 //defined in PegasusVersion.h
|
185 h.sterling 1.153 virtual const char* getVersion() const
186 {
187 return PEGASUS_PRODUCT_VERSION;
188 }
189
190 virtual const char* getProcessName() const
191 {
192 return PEGASUS_PROCESS_NAME;
193 }
194
|
195 kumpf 1.178 int cimserver_run(
196 int argc,
197 char** argv,
198 Boolean shutdownOption,
199 Boolean debugOutputOption);
|
200 h.sterling 1.153
|
201 kumpf 1.203 void cimserver_stop();
|
202 h.sterling 1.153 };
203
|
204 kumpf 1.198 ServerRunStatus _serverRunStatus(
205 PEGASUS_PROCESS_NAME, PEGASUS_CIMSERVER_START_FILE);
|
206 h.sterling 1.153 AutoPtr<CIMServerProcess> _cimServerProcess(new CIMServerProcess());
207 static CIMServer* _cimServer = 0;
|
208 konrad.r 1.166 static Thread* dummyInitialThread = 0;
|
209 kumpf 1.203
|
210 mike 1.35 //
211 // The command name.
212 //
213 static const char COMMAND_NAME [] = "cimserver";
214
215 //
216 // The constant defining usage string.
217 //
218 static const char USAGE [] = "Usage: ";
219
220 /**
221 Constants representing the command line options.
222 */
223 static const char OPTION_VERSION = 'v';
224
225 static const char OPTION_HELP = 'h';
226
227 static const char OPTION_HOME = 'D';
228
229 static const char OPTION_SHUTDOWN = 's';
230
|
231 kumpf 1.203 static const char LONG_HELP[] = "help";
|
232 a.arora 1.142
|
233 kumpf 1.203 static const char LONG_VERSION[] = "version";
|
234 a.arora 1.142
|
235 kumpf 1.178 static const char OPTION_DEBUGOUTPUT = 'X';
|
236 kumpf 1.48
|
237 mike 1.32 /** GetOptions function - This function defines the Options Table
|
238 mike 1.35 and sets up the options from that table using the config manager.
|
239 kumpf 1.198
240 Some possible exceptions: NoSuchFile, FileNotReadable, CannotRenameFile,
241 ConfigFileSyntaxError, UnrecognizedConfigProperty, InvalidPropertyValue,
242 CannotOpenFile.
|
243 mike 1.32 */
244 void GetOptions(
|
245 mike 1.35 ConfigManager* cm,
|
246 mike 1.32 int& argc,
|
247 mateus.baur 1.193 char** argv,
|
248 kumpf 1.198 Boolean shutdownOption)
|
249 mike 1.32 {
|
250 kumpf 1.198 if (shutdownOption)
251 {
252 cm->loadConfigFiles();
253 }
254 else
|
255 mike 1.32 {
|
256 kumpf 1.198 cm->mergeConfigFiles();
257 }
|
258 mateus.baur 1.193
|
259 kumpf 1.198 // Temporarily disable updates to the current configuration
260 // file if shutdownOption is true
261 cm->useConfigFiles = (shutdownOption==false);
|
262 mike 1.33
|
263 kumpf 1.198 cm->mergeCommandLine(argc, argv);
|
264 mateus.baur 1.193
|
265 kumpf 1.198 // Enable updates again
266 cm->useConfigFiles = true;
|
267 mike 1.32 }
268
269 /* PrintHelp - This is temporary until we expand the options manager to allow
270 options help to be defined with the OptionRow entries and presented from
271 those entries.
272 */
273 void PrintHelp(const char* arg0)
274 {
|
275 mike 1.35 String usage = String (USAGE);
|
276 kumpf 1.202 usage.append(COMMAND_NAME);
277 usage.append(" [ [ options ] | [ configProperty=value, ... ] ]\n");
278 usage.append(" options\n");
279 usage.append(" -v, --version - displays CIM Server version number\n");
|
280 denise.eckstein 1.229 usage.append(" --status - displays the running status of"
281 " the CIM Server\n");
|
282 kumpf 1.202 usage.append(" -h, --help - prints this help message\n");
283 usage.append(" -s - shuts down CIM Server\n");
|
284 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
|
285 kumpf 1.202 usage.append(" -D [home] - sets pegasus home directory\n");
|
286 humberto 1.97 #endif
287 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
288 kumpf 1.202 usage.append(" -install [name] - installs pegasus as a Windows "
289 "Service\n");
290 usage.append(" [name] is optional and overrides "
291 "the\n");
292 usage.append(" default CIM Server Service Name\n");
293 usage.append(" by appending [name]\n");
294 usage.append(" -remove [name] - removes pegasus as a Windows "
295 "Service\n");
296 usage.append(" [name] is optional and overrides "
297 "the\n");
298 usage.append(" default CIM Server Service Name\n");
299 usage.append(" by appending [name]\n");
300 usage.append(" -start [name] - starts pegasus as a Windows Service\n");
301 usage.append(" [name] is optional and overrides "
302 "the\n");
303 usage.append(" default CIM Server Service Name\n");
304 usage.append(" by appending [name]\n");
305 usage.append(" -stop [name] - stops pegasus as a Windows Service\n");
306 usage.append(" [name] is optional and overrides "
307 "the\n");
308 usage.append(" default CIM Server Service Name\n");
309 kumpf 1.202 usage.append(" by appending [name]\n\n");
310 #endif
311 usage.append(" configProperty=value\n");
312 usage.append(" - sets CIM Server configuration "
313 "property\n");
|
314 humberto 1.97
315 cout << endl;
|
316 kumpf 1.202 cout << _cimServerProcess->getProductName() << " " <<
317 _cimServerProcess->getCompleteVersion() << endl;
|
318 humberto 1.97 cout << endl;
|
319 david.dillard 1.165
|
320 humberto 1.97 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
321 humberto 1.104 MessageLoaderParms parms("src.Server.cimserver.MENU.WINDOWS", usage);
|
322 kumpf 1.152 #elif defined(PEGASUS_USE_RELEASE_DIRS)
|
323 kumpf 1.202 MessageLoaderParms parms(
324 "src.Server.cimserver.MENU.HPUXLINUXIA64GNU",
325 usage);
|
326 humberto 1.97 #else
|
327 kumpf 1.138 MessageLoaderParms parms("src.Server.cimserver.MENU.STANDARD", usage);
|
328 humberto 1.97 #endif
329 cout << MessageLoader::getMessage(parms) << endl;
|
330 mike 1.35 }
331
|
332 kumpf 1.202 // This needs to be called at various points in the code depending on the
333 // platform and error conditions.
334 // We need to delete the _cimServer reference on exit in order for the
335 // destructors to get called.
|
336 h.sterling 1.156 void deleteCIMServer()
337 {
|
338 kumpf 1.203 delete _cimServer;
339 _cimServer = 0;
|
340 kumpf 1.202
341 if (dummyInitialThread)
342 {
|
343 kumpf 1.199 Thread::clearLanguages();
344 delete dummyInitialThread;
|
345 kumpf 1.202 }
|
346 karl 1.237.2.1 _serverRunStatus.setServerNotRunning();
|
347 h.sterling 1.156 }
348
|
349 chuck 1.96 //
350 // Dummy function for the Thread object associated with the initial thread.
351 // Since the initial thread is used to process CIM requests, this is
352 // needed to localize the exceptions thrown during CIM request processing.
|
353 david.dillard 1.165 // Note: This function should never be called!
354 //
|
355 kumpf 1.202 ThreadReturnType PEGASUS_THREAD_CDECL dummyThreadFunc(void* parm)
|
356 chuck 1.96 {
|
357 kumpf 1.202 return (ThreadReturnType)0;
|
358 chuck 1.96 }
359
|
360 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
361
362 static int _extractExecutorSockOpt(int& argc, char**& argv)
363 {
364 // Extract the "--executor-socket <sock>" option if any. This indicates
365 // that the e[x]ecutor is running. The option argument is the socket used
366 // to communicate with the executor. Remove the option from the
367 // argv list and decrease argc by two.
368
369 int sock = -1;
370 const char OPT[] = "--executor-socket";
371
372 for (int i = 1; i < argc; i++)
373 {
374 if (strcmp(argv[i], OPT) == 0)
375 {
376 // Check for missing option argument.
377
378 if (i + 1 == argc)
379 {
380 MessageLoaderParms parms(
381 kumpf 1.199 "src.Server.cimserver.MISSING_OPTION_ARGUMENT",
382 "Missing argument for $0 option.",
383 OPT);
384 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) <<
385 endl;
386 exit(1);
387 }
388
389 // Convert argument to positive integer.
390
391 char* end;
392 unsigned long x = strtoul(argv[i+1], &end, 10);
393
394 // Check whether option argument will fit in a signed integer.
395
396 if (*end != '\0' || x > 2147483647)
397 {
398 MessageLoaderParms parms(
399 "src.Server.cimserver.BAD_OPTION_ARGUMENT",
400 "Bad $0 option argument: $1.",
401 OPT,
402 kumpf 1.199 argv[i+1]);
403 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) <<
404 endl;
405 exit(1);
406 }
407
408 sock = int(x);
409
410 // Remove "-x <sock>" from argv-argc.
411
412 memmove(argv + i, argv + i + 2, sizeof(char*) * (argc - i - 1));
413 argc -= 2;
414 break;
415 }
416 }
417
418 if (sock == -1)
419 {
420 MessageLoaderParms parms(
421 "src.Server.cimserver.MISSING_OPTION",
422 "Missing $0 option.",
423 kumpf 1.199 OPT);
424 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) << endl;
425 exit(1);
426 }
427
428 return sock;
429 }
430
431 #endif /* PEGASUS_ENABLE_PRIVILEGE_SEPARATION */
|
432 mike 1.35
|
433 venkat.puvvada 1.231 static void _initConfigProperty(const String &propName, Uint32 value)
434 {
435 char strValue[22];
436 Uint32 n;
437 const char *startP = Uint32ToString(
438 strValue,
439 value,
440 n);
441 ConfigManager::getInstance()->initCurrentValue(propName, String(startP, n));
442 }
443
|
444 mike 1.33 /////////////////////////////////////////////////////////////////////////
|
445 mike 1.32 // MAIN
446 //////////////////////////////////////////////////////////////////////////
|
447 kumpf 1.199
|
448 mike 1.32 int main(int argc, char** argv)
449 {
|
450 kumpf 1.196 String pegasusHome;
|
451 mike 1.35 Boolean shutdownOption = false;
|
452 kumpf 1.178 Boolean debugOutputOption = false;
|
453 mday 1.47
|
454 kumpf 1.202 // Set Message loading to process locale
455 MessageLoader::_useProcessLocale = true;
|
456 humberto 1.97
|
457 thilo.boehm 1.211 #ifdef PEGASUS_OS_ZOS
458 // Direct standard input to /dev/null,
459 close(STDIN_FILENO);
460 open("/dev/null", O_RDONLY);
461
462 if ( setEBCDICEncoding(STDOUT_FILENO)==-1 ||
463 setEBCDICEncoding(STDERR_FILENO)==-1 )
464 {
|
465 marek 1.220 PEG_TRACE_CSTRING(TRC_SERVER,Tracer::LEVEL1,
|
466 thilo.boehm 1.211 "Coud not set stdout or stderr to EBCDIC encoding.");
467 }
468 // Need to initialize timezone information in the
469 // initial processing thread (IPT)
|
470 marek 1.236 initialize_zOS_timezone();
|
471 thilo.boehm 1.211 #endif
472
|
473 kv.le 1.140 #if defined(PEGASUS_OS_AIX) && defined(PEGASUS_HAS_MESSAGES)
|
474 kumpf 1.202 setlocale(LC_ALL, "");
|
475 kv.le 1.140 #endif
476
|
477 tony 1.82 #ifndef PEGASUS_OS_TYPE_WINDOWS
|
478 kumpf 1.38 //
479 // Get environment variables:
480 //
|
481 kumpf 1.202 # if defined(PEGASUS_OS_AIX) && defined(PEGASUS_USE_RELEASE_DIRS)
|
482 kv.le 1.134 pegasusHome = AIX_RELEASE_PEGASUS_HOME;
|
483 ouyang.jian 1.210 # elif defined(PEGASUS_OS_PASE)
484 const char *tmp = getenv("PEGASUS_HOME");
485 pegasusHome = (tmp == 0) ? PASE_DEFAULT_PEGASUS_HOME : tmp;
|
486 kumpf 1.202 # elif !defined(PEGASUS_USE_RELEASE_DIRS) || \
|
487 r.kieninger 1.223 defined(PEGASUS_OS_ZOS)
|
488 kumpf 1.38 const char* tmp = getenv("PEGASUS_HOME");
489
490 if (tmp)
491 {
492 pegasusHome = tmp;
493 }
|
494 kumpf 1.202 # endif
|
495 kumpf 1.38
496 FileSystem::translateSlashes(pegasusHome);
|
497 tony 1.82 #else
|
498 kumpf 1.38
|
499 kumpf 1.202 // windows only
500 //setHome(pegasusHome);
501 pegasusHome = _cimServerProcess->getHome();
|
502 tony 1.82 #endif
|
503 mike 1.32
|
504 kumpf 1.199 #ifdef PEGASUS_ENABLE_PRIVILEGE_SEPARATION
505
506 // If invoked with "--executor-socket <socket>" option, then use executor.
507
508 Executor::setSock(_extractExecutorSockOpt(argc, argv));
509
510 // Ping executor to verify the specified socket is valid.
511
512 if (Executor::ping() != 0)
513 {
514 MessageLoaderParms parms("src.Server.cimserver.EXECUTOR_PING_FAILED",
515 "Failed to ping the executor on the specified socket.");
516 cerr << argv[0] << ": " << MessageLoader::getMessage(parms) << endl;
517 exit(1);
518 }
519
520 #endif /* !defined(PEGASUS_ENABLE_PRIVILEGE_SEPARATION) */
521
|
522 denise.eckstein 1.229 // Get help, version, status and shutdown options
|
523 mike 1.35
524 for (int i = 1; i < argc; )
525 {
526 const char* arg = argv[i];
|
527 kumpf 1.216 if (strcmp(arg, "--help") == 0)
|
528 a.arora 1.142 {
|
529 kumpf 1.216 PrintHelp(argv[0]);
530 Executor::daemonizeExecutor();
531 exit(0);
|
532 a.arora 1.142 }
|
533 denise.eckstein 1.229 if (strcmp(arg, "--status") == 0)
534 {
535 int retValue = 0;
536 if (_serverRunStatus.isServerRunning())
537 {
538 MessageLoaderParms parms(
539 "src.Server.cimserver.CIMSERVER_RUNNING",
540 "The CIM Server is running.");
541 cout << MessageLoader::getMessage(parms) << endl;
542 }
543 else
544 {
545 MessageLoaderParms parms(
546 "src.Server.cimserver.CIMSERVER_NOT_RUNNING",
547 "The CIM Server is not running.");
548 cout << MessageLoader::getMessage(parms) << endl;
549 retValue = 2;
550 }
551 Executor::daemonizeExecutor();
552 exit(retValue);
553 }
|
554 kumpf 1.216 else if (strcmp(arg, "--version") == 0)
|
555 a.arora 1.142 {
|
556 jim.wunderlich 1.180 cout << _cimServerProcess->getCompleteVersion() << endl;
|
557 kumpf 1.216 Executor::daemonizeExecutor();
|
558 a.arora 1.142 exit(0);
559 }
|
560 mike 1.35 // Check for -option
|
561 a.arora 1.142 else if (*arg == '-')
|
562 mike 1.35 {
563 // Get the option
564 const char* option = arg + 1;
565
566 //
567 // Check to see if user asked for the version (-v option):
568 //
|
569 tony 1.83 if (*option == OPTION_VERSION &&
570 strlen(option) == 1)
|
571 mike 1.35 {
|
572 jim.wunderlich 1.180 cout << _cimServerProcess->getCompleteVersion() << endl;
|
573 kumpf 1.216 Executor::daemonizeExecutor();
|
574 mike 1.35 exit(0);
575 }
576 //
577 // Check to see if user asked for help (-h option):
578 //
|
579 tony 1.83 else if (*option == OPTION_HELP &&
580 (strlen(option) == 1))
|
581 mike 1.35 {
582 PrintHelp(argv[0]);
|
583 kumpf 1.216 Executor::daemonizeExecutor();
|
584 mike 1.35 exit(0);
585 }
|
586 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
|
587 tony 1.83 else if (*option == OPTION_HOME &&
588 (strlen(option) == 1))
|
589 mike 1.35 {
|
590 kumpf 1.60 if (i + 1 < argc)
|
591 mike 1.35 {
592 pegasusHome.assign(argv[i + 1]);
593 }
594 else
595 {
|
596 humberto 1.99 String opt(option);
|
597 kumpf 1.202 MessageLoaderParms parms(
598 "src.Server.cimserver.MISSING_ARGUMENT",
599 "Missing argument for option -$0",
600 opt);
|
601 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
602 kumpf 1.216 exit(1);
|
603 mike 1.35 }
604
605 memmove(&argv[i], &argv[i + 2], (argc-i-1) * sizeof(char*));
606 argc -= 2;
607 }
|
608 kumpf 1.63 #endif
|
609 kumpf 1.48 //
|
610 kumpf 1.178 // Check to see if user asked for debug output (-X option):
|
611 kumpf 1.48 //
|
612 kumpf 1.178 else if (*option == OPTION_DEBUGOUTPUT &&
|
613 tony 1.83 (strlen(option) == 1))
|
614 kumpf 1.48 {
|
615 kumpf 1.178 MessageLoaderParms parms(
616 "src.Server.cimserver.UNSUPPORTED_DEBUG_OPTION",
617 "Unsupported debug output option is enabled.");
|
618 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
619 kumpf 1.178
620 debugOutputOption = true;
621
622 #if defined(PEGASUS_OS_HPUX)
623 System::bindVerbose = true;
624 #endif
625
|
626 kumpf 1.48 // remove the option from the command line
627 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
628 david.dillard 1.165 argc--;
|
629 kumpf 1.48 }
|
630 mike 1.35 //
631 // Check to see if user asked for shutdown (-s option):
632 //
|
633 tony 1.82 else if (*option == OPTION_SHUTDOWN &&
634 (strlen(option) == 1))
|
635 mike 1.35 {
636 //
|
637 kumpf 1.52 // Check to see if shutdown has already been specified:
|
638 mike 1.35 //
|
639 kumpf 1.52 if (shutdownOption)
|
640 mike 1.35 {
|
641 kumpf 1.202 MessageLoaderParms parms(
642 "src.Server.cimserver.DUPLICATE_SHUTDOWN_OPTION",
643 "Duplicate shutdown option specified.");
|
644 david.dillard 1.165
|
645 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
646 kumpf 1.216 exit(1);
|
647 mike 1.35 }
648
|
649 kumpf 1.52 shutdownOption = true;
|
650 david.dillard 1.165
|
651 mike 1.35 // remove the option from the command line
652 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
653 david.dillard 1.165 argc--;
|
654 mike 1.35 }
655 else
656 i++;
657 }
658 else
659 i++;
|
660 mike 1.32 }
|
661 mike 1.35
|
662 kumpf 1.38 //
663 // Set the value for pegasusHome property
664 //
665 ConfigManager::setPegasusHome(pegasusHome);
|
666 mike 1.32
|
667 mike 1.35 //
|
668 carolann.graves 1.171 // Do the platform specific run
|
669 s.hills 1.117 //
670
|
671 kumpf 1.178 return _cimServerProcess->platform_run(
672 argc, argv, shutdownOption, debugOutputOption);
|
673 s.hills 1.117 }
674
|
675 h.sterling 1.153 void CIMServerProcess::cimserver_stop()
676 {
677 _cimServer->shutdownSignal();
678 }
|
679 s.hills 1.117
680 //
681 // The main, common, running code
682 //
|
683 david.dillard 1.165 // NOTE: Do NOT call exit(). Use return(), otherwise some platforms
|
684 s.hills 1.117 // will fail to shutdown properly/cleanly.
685 //
|
686 david.dillard 1.165 // TODO: Current change minimal for platform "service" shutdown bug fixes.
|
687 carolann.graves 1.171 // Perhaps further extract out common stuff and put into main(), put
|
688 david.dillard 1.165 // daemon stuff into platform specific platform_run(), etc.
689 // Note: make sure to not put error handling stuff that platform
|
690 carolann.graves 1.171 // specific runs may need to deal with better (instead of exit(), etc).
|
691 s.hills 1.117 //
692
|
693 kumpf 1.178 int CIMServerProcess::cimserver_run(
694 int argc,
695 char** argv,
696 Boolean shutdownOption,
697 Boolean debugOutputOption)
|
698 s.hills 1.117 {
699 Boolean daemonOption = false;
700
|
701 ouyang.jian 1.206 #if defined (PEGASUS_OS_PASE) && !defined (PEGASUS_DEBUG)
702 // PASE have itself regular for checking privileged user
703 if (!System::isPrivilegedUser("*CURRENT "))
704 {
705 MessageLoaderParms parms(
706 "src.Server.cimserver.NO_AUTHORITY.PEGASUS_OS_PASE",
707 "The caller should be a privileged user,"
708 " or the server will not run.");
709 cerr << MessageLoader::getMessage(parms) << endl;
710 exit (1);
711 }
712 char jobName[11];
713 // this function only can be found in PASE environment
714 umeGetJobName(jobName, false);
715 if (strncmp("QUMECIMOM ", jobName, 10) != 0
716 && strncmp("QUMEENDCIM", jobName, 10) != 0)
717 {
718 MessageLoaderParms parms(
719 "src.Server.cimserver.NOT_OFFICIAL_START.PEGASUS_OS_PASE",
720 "cimserver can not be started by user.\nServer will not run.");
721 cerr << MessageLoader::getMessage(parms) << endl;
722 ouyang.jian 1.206 exit (1);
723 }
724
|
725 kumpf 1.228 // Direct standard input, output, and error to /dev/null,
|
726 ouyang.jian 1.206 // PASE run this job in background, any output in not allowed
727 freopen("/dev/null", "r", stdin);
728 freopen("/dev/null", "w", stdout);
729 freopen("/dev/null", "w", stderr);
730 #endif
731
|
732 s.hills 1.117 //
|
733 mike 1.35 // Get an instance of the Config Manager.
734 //
|
735 kumpf 1.203 ConfigManager* configManager = ConfigManager::getInstance();
|
736 kumpf 1.136 configManager->useConfigFiles = true;
|
737 mike 1.35
|
738 mike 1.32 try
739 {
|
740 kumpf 1.203 //
741 // Get options (from command line and from configuration file); this
742 // removes corresponding options and their arguments from the command
743 // line. NOTE: If shutdownOption=true, the contents of current config
744 // file are not overwritten by the planned config file.
745 //
|
746 mateus.baur 1.193 GetOptions(configManager, argc, argv, shutdownOption);
|
747 kumpf 1.127
|
748 kumpf 1.203 //
749 // Initialize the message home directory in the MessageLoader.
750 // This is the default directory where the resource bundles are found.
751 //
752 MessageLoader::setPegasusMsgHome(ConfigManager::getHomedPath(
753 ConfigManager::getInstance()->getCurrentValue("messageDir")));
|
754 kumpf 1.86
|
755 ouyang.jian 1.224 #if !defined(PEGASUS_USE_SYSLOGS)
756 String logsDirectory = ConfigManager::getHomedPath(
757 configManager->getCurrentValue("logdir"));
758
759 // Set up the Logger. This does not open the logs.
760 // Might be more logical to clean before set.
761 Logger::setHomeDirectory(logsDirectory);
762 #endif
763
764
|
765 ouyang.jian 1.206 #ifdef PEGASUS_OS_PASE
|
766 ouyang.jian 1.224 /* write job log to tell where pegasus log is.*/
767 if(logsDirectory.size() > 0)
768 // this function only can be found in PASE environment
769 logPegasusDir2joblog(logsDirectory.getCString());
770 else
771 logPegasusDir2joblog(".");
772
773 // set ccsid to unicode for entire job
774 // ccsid is globolization mechanism in PASE environment
775 if (_SETCCSID(1208) == -1)
776 {
777 MessageLoaderParms parms(
778 "src.Server.cimserver.SET_CCSID_ERROR.PEGASUS_OS_PASE",
779 "Failed to set CCSID, server will stop.");
780 cerr << MessageLoader::getMessage(parms) << endl;
781 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::FATAL,
782 parms);
783 exit (1);
784 }
|
785 ouyang.jian 1.206
|
786 ouyang.jian 1.224 char fullJobName[29];
787 umeGetJobName(fullJobName, true);
788 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
789 Logger::INFORMATION,
790 MessageLoaderParms(
791 "src.Server.cimserver.SERVER_JOB_NAME.PEGASUS_OS_PASE",
792 "CIM Server's Job Name is: $0", fullJobName));
|
793 ouyang.jian 1.206 #endif
794
|
795 kumpf 1.221 #ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
796 // Make sure at least one connection is enabled
|
797 ouyang.jian 1.206
|
798 kumpf 1.221 Boolean enableHttpConnection = ConfigManager::parseBooleanValue(
799 configManager->getCurrentValue("enableHttpConnection"));
800 Boolean enableHttpsConnection = ConfigManager::parseBooleanValue(
801 configManager->getCurrentValue("enableHttpsConnection"));
802
803 if (!enableHttpConnection && !enableHttpsConnection)
804 {
805 MessageLoaderParms parms(
|
806 ouyang.jian 1.206 "src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
807 "Neither HTTP nor HTTPS connection is enabled."
|
808 kumpf 1.221 " CIMServer will not be started.");
|
809 kumpf 1.222 Logger::put_l(
810 Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
811 parms);
|
812 kumpf 1.221 cerr << MessageLoader::getMessage(parms) << endl;
813 return 1;
814 }
|
815 ouyang.jian 1.206 #endif
|
816 kumpf 1.221
|
817 mike 1.35 //
|
818 kumpf 1.187 // Check to see if we should start Pegasus as a daemon
|
819 mike 1.35 //
|
820 kumpf 1.187 daemonOption = ConfigManager::parseBooleanValue(
821 configManager->getCurrentValue("daemon"));
|
822 david.dillard 1.165
|
823 kumpf 1.215 if ((Executor::detectExecutor() == 0) && (daemonOption == false))
824 {
825 MessageLoaderParms parms(
826 "src.Server.cimserver.PRIVSEP_REQUIRES_DAEMON",
827 "Warning: The configuration setting daemon=false is ignored "
828 "with privilege separation enabled.");
829 cerr << MessageLoader::getMessage(parms) << endl;
830 daemonOption = true;
831 }
832
|
833 kumpf 1.36 //
|
834 david.dillard 1.165 // Check to see if we need to shutdown CIMOM
|
835 mike 1.35 //
836 if (shutdownOption)
837 {
|
838 david.dillard 1.165 String configTimeout =
|
839 kumpf 1.60 configManager->getCurrentValue("shutdownTimeout");
|
840 kumpf 1.202 Uint32 timeoutValue =
841 strtol(configTimeout.getCString(), (char **)0, 10);
|
842 david.dillard 1.165
|
843 kumpf 1.198 ServerShutdownClient serverShutdownClient(&_serverRunStatus);
844 serverShutdownClient.shutdown(timeoutValue);
|
845 kumpf 1.45
|
846 kumpf 1.198 MessageLoaderParms parms(
847 "src.Server.cimserver.SERVER_STOPPED",
848 "CIM Server stopped.");
|
849 humberto 1.106
|
850 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
851 kumpf 1.202 return 0;
|
852 mike 1.35 }
|
853 mike 1.32
|
854 kumpf 1.198 #if defined(PEGASUS_DEBUG) && !defined(PEGASUS_USE_SYSLOGS)
|
855 kumpf 1.36 // Leave this in until people get familiar with the logs.
|
856 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.LOGS_DIRECTORY",
|
857 h.sterling 1.153 "Logs Directory = ");
|
858 humberto 1.97 cout << MessageLoader::getMessage(parms) << logsDirectory << endl;
|
859 kumpf 1.57 #endif
|
860 mike 1.32 }
|
861 kumpf 1.203 catch (Exception& e)
|
862 mike 1.32 {
|
863 kumpf 1.203 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
864 "cimserver not started: $0", e.getMessage());
|
865 kumpf 1.222 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
866 parms);
|
867 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
868
869 return 1;
|
870 marek 1.186 }
|
871 david 1.85
|
872 thilo.boehm 1.237 #if defined(PEGASUS_OS_ZOS)
873 # if defined(PEGASUS_ZOS_SECURITY)
|
874 marek 1.186 startupCheckBPXServer(true);
875 startupCheckProfileCIMSERVclassWBEM();
876 startupEnableMSC();
|
877 thilo.boehm 1.237 # endif
878 startupWaitForTCPIP();
|
879 david 1.85 #endif
|
880 mike 1.32
|
881 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
882 mike 1.32 // Put out startup up message.
|
883 kumpf 1.202 cout << _cimServerProcess->getProductName() << " " <<
884 _cimServerProcess->getCompleteVersion() << endl;
|
885 humberto 1.97 #endif
886
|
887 kumpf 1.202 // reset message loading to NON-process locale
888 MessageLoader::_useProcessLocale = false;
|
889 mike 1.32
|
890 kumpf 1.137 // Get the parent's PID before forking
|
891 kumpf 1.198 _serverRunStatus.setParentPid(System::getPID());
|
892 david.dillard 1.165
|
893 kumpf 1.202 // Do not fork when using privilege separation (executor will daemonize
894 // itself later).
|
895 kumpf 1.63 if (daemonOption)
896 {
|
897 kumpf 1.202 if (-1 == _cimServerProcess->cimserver_fork())
898 return -1;
|
899 kumpf 1.63 }
|
900 chuck 1.66
|
901 chuck 1.96 // Now we are after the fork...
902 // Create a dummy Thread object that can be used to store the
|
903 kumpf 1.176 // AcceptLanguageList object for CIM requests that are serviced
|
904 chuck 1.96 // by this thread (initial thread of server). Need to do this
905 // because this thread is not in a ThreadPool, but is used
906 // to service CIM requests.
907 // The run function for the dummy Thread should never be called,
|
908 konrad.r 1.166 dummyInitialThread = new Thread(dummyThreadFunc, NULL, false);
|
909 david.dillard 1.165 Thread::setCurrent(dummyInitialThread);
|
910 kumpf 1.202 try
911 {
|
912 kumpf 1.214 Thread::setLanguages(LanguageParser::getDefaultAcceptLanguages());
|
913 kumpf 1.202 }
914 catch (InvalidAcceptLanguageHeader& e)
915 {
|
916 kumpf 1.203 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
|
917 kumpf 1.222 MessageLoaderParms(
918 "src.Server.cimserver.FAILED_TO_SET_PROCESS_LOCALE",
919 "Could not convert the system process locale into a valid "
920 "AcceptLanguage format."));
|
921 kumpf 1.203 Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
922 e.getMessage());
|
923 humberto 1.108 }
|
924 david.dillard 1.165
|
925 kumpf 1.167 #ifndef PEGASUS_OS_TYPE_WINDOWS
926 umask(S_IRWXG|S_IRWXO);
927 #endif
|
928 mday 1.62
|
929 kumpf 1.203 // Start up the CIM Server
|
930 mateus.baur 1.175
|
931 kumpf 1.203 try
932 {
|
933 mateus.baur 1.175 #if defined(PEGASUS_OS_TYPE_UNIX)
|
934 kumpf 1.203 //
935 // Lock the CIMSERVER_LOCK_FILE during CIM Server start-up to prevent
936 // concurrent writes to this file by multiple cimserver processes
937 // starting at the same time.
938 //
939 CString startupLockFileName = ConfigManager::getHomedPath(
|
940 kumpf 1.204 PEGASUS_CIMSERVER_START_LOCK_FILE).getCString();
|
941 kumpf 1.203
942 // Make sure the start-up lock file exists
943 FILE* startupLockFile;
944 if ((startupLockFile = fopen(startupLockFileName, "w")) != 0)
945 {
946 fclose(startupLockFile);
947 }
|
948 kumpf 1.202
|
949 kumpf 1.203 AutoFileLock fileLock(startupLockFileName);
950 #endif
|
951 kumpf 1.202
|
952 kumpf 1.203 #if defined(PEGASUS_OS_TYPE_UNIX) || defined(PEGASUS_OS_VMS)
953 //
954 // Check if a CIM Server is already running. If so, print an error
955 // message and notify the parent process (if there is one) to terminate
956 //
957 if (_serverRunStatus.isServerRunning())
958 {
959 MessageLoaderParms parms(
960 "src.Server.cimserver.UNABLE_TO_START_SERVER_ALREADY_RUNNING",
961 "Unable to start CIMServer. CIMServer is already running.");
|
962 kumpf 1.222 Logger::put_l(
|
963 kumpf 1.203 Logger::ERROR_LOG, System::CIMSERVER, Logger::INFORMATION,
|
964 kumpf 1.222 parms);
|
965 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
966 mateus.baur 1.175
|
967 kumpf 1.203 if (daemonOption)
968 {
969 _cimServerProcess->notify_parent(1);
970 }
|
971 kumpf 1.79
|
972 kumpf 1.203 return 1;
973 }
|
974 kumpf 1.79
|
975 kumpf 1.198 //
|
976 kumpf 1.203 // Declare ourselves as the running CIM Server process, and write our
977 // PID to the PID file.
|
978 kumpf 1.79 //
|
979 kumpf 1.203 _serverRunStatus.setServerRunning();
980 #endif
981
982 // Create and initialize the CIMServer object
983
984 _cimServer = new CIMServer();
985
986 Boolean enableHttpConnection = ConfigManager::parseBooleanValue(
987 configManager->getCurrentValue("enableHttpConnection"));
988 Boolean enableHttpsConnection = ConfigManager::parseBooleanValue(
989 configManager->getCurrentValue("enableHttpsConnection"));
990
991 #ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
992 // Make sure at least one connection is enabled
993 if (!enableHttpConnection && !enableHttpsConnection)
|
994 kumpf 1.198 {
|
995 kumpf 1.203 MessageLoaderParms parms(
996 "src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
997 "Neither HTTP nor HTTPS connection is enabled.");
998 throw Exception(parms);
|
999 kumpf 1.198 }
|
1000 kumpf 1.63 #endif
|
1001 kumpf 1.51
|
1002 venkat.puvvada 1.208 Boolean addIP6Acceptor = false;
1003 Boolean addIP4Acceptor = false;
1004
1005 #ifdef PEGASUS_OS_TYPE_WINDOWS
1006 addIP4Acceptor = true;
1007 #endif
1008
1009 #ifdef PEGASUS_ENABLE_IPV6
1010 // If IPv6 stack is disabled swicth to IPv4 stack.
1011 if (System::isIPv6StackActive())
1012 {
1013 addIP6Acceptor = true;
1014 }
1015 else
1016 {
|
1017 marek 1.233 PEG_TRACE_CSTRING(TRC_SERVER,Tracer::LEVEL4,
|
1018 venkat.puvvada 1.208 "IPv6 stack is not active, using IPv4 socket.");
1019 }
1020 #endif
1021 if (!addIP6Acceptor)
1022 {
1023 addIP4Acceptor = true;
1024 }
1025
|
1026 kumpf 1.203 // The server HTTP and HTTPS ports are determined via this algorithm:
1027 // 1) If the user explicitly specified a port, use it.
1028 // 2) If the user did not specify a port, get the port from the
1029 // services file.
1030 // 3) If no value is specified in the services file, use the IANA WBEM
1031 // default port.
1032 // Note that 2 and 3 are done within the System::lookupPort method
1033 // An empty string from the ConfigManager implies that the user did not
1034 // specify a port.
|
1035 kumpf 1.41
|
1036 kumpf 1.86 if (enableHttpConnection)
1037 {
|
1038 kumpf 1.203 Uint32 portNumberHttp = 0;
1039 String httpPort = configManager->getCurrentValue("httpPort");
1040 if (httpPort == String::EMPTY)
1041 {
1042 //
1043 // Look up the WBEM-HTTP port number
1044 //
1045 portNumberHttp = System::lookupPort(
1046 WBEM_HTTP_SERVICE_NAME, WBEM_DEFAULT_HTTP_PORT);
|
1047 venkat.puvvada 1.231 _initConfigProperty("httpPort", portNumberHttp);
|
1048 kumpf 1.203 }
1049 else
1050 {
1051 //
1052 // user-specified
1053 //
1054 CString portString = httpPort.getCString();
1055 char* end = 0;
1056 portNumberHttp = strtol(portString, &end, 10);
1057 if (!(end != 0 && *end == '\0'))
1058 {
1059 throw InvalidPropertyValue("httpPort", httpPort);
1060 }
1061 }
1062
|
1063 venkat.puvvada 1.208 if (addIP6Acceptor)
1064 {
1065 _cimServer->addAcceptor(HTTPAcceptor::IPV6_CONNECTION,
1066 portNumberHttp, false);
1067 }
1068 if (addIP4Acceptor)
1069 {
1070 _cimServer->addAcceptor(HTTPAcceptor::IPV4_CONNECTION,
1071 portNumberHttp, false);
1072 }
|
1073 denise.eckstein 1.225 // The port number is converted to a string to avoid the
1074 // addition of localized characters (e.g., "5,988").
|
1075 denise.eckstein 1.218 char scratchBuffer[22];
1076 Uint32 n;
1077 const char * portNumberHttpStr = Uint32ToString(
|
1078 kumpf 1.228 scratchBuffer, portNumberHttp, n);
|
1079 kumpf 1.203 MessageLoaderParms parms(
|
1080 kumpf 1.198 "src.Server.cimserver.LISTENING_ON_HTTP_PORT",
|
1081 denise.eckstein 1.218 "Listening on HTTP port $0.", portNumberHttpStr);
|
1082 kumpf 1.222 Logger::put_l(
|
1083 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1084 kumpf 1.222 parms);
|
1085 kumpf 1.203 #if defined(PEGASUS_DEBUG)
1086 cout << MessageLoader::getMessage(parms) << endl;
1087 #endif
|
1088 kumpf 1.86 }
|
1089 kumpf 1.198
|
1090 kumpf 1.86 if (enableHttpsConnection)
1091 {
|
1092 kumpf 1.203 Uint32 portNumberHttps = 0;
1093 String httpsPort = configManager->getCurrentValue("httpsPort");
1094 if (httpsPort == String::EMPTY)
1095 {
1096 //
1097 // Look up the WBEM-HTTPS port number
1098 //
1099 portNumberHttps = System::lookupPort(
1100 WBEM_HTTPS_SERVICE_NAME, WBEM_DEFAULT_HTTPS_PORT);
|
1101 venkat.puvvada 1.231 _initConfigProperty("httpsPort", portNumberHttps);
|
1102 kumpf 1.203 }
1103 else
1104 {
1105 //
1106 // user-specified
1107 //
1108 CString portString = httpsPort.getCString();
1109 char* end = 0;
1110 portNumberHttps = strtol(portString, &end, 10);
1111 if (!(end != 0 && *end == '\0'))
1112 {
1113 throw InvalidPropertyValue("httpsPort", httpsPort);
1114 }
1115 }
|
1116 venkat.puvvada 1.208 if (addIP6Acceptor)
|
1117 kumpf 1.228 {
|
1118 venkat.puvvada 1.208 _cimServer->addAcceptor(HTTPAcceptor::IPV6_CONNECTION,
1119 portNumberHttps, true);
1120 }
1121 if (addIP4Acceptor)
1122 {
1123 _cimServer->addAcceptor(HTTPAcceptor::IPV4_CONNECTION,
1124 portNumberHttps, true);
1125 }
|
1126 denise.eckstein 1.225 // The port number is converted to a string to avoid the
1127 // addition of localized characters (e.g., "5,989").
|
1128 denise.eckstein 1.218 char scratchBuffer[22];
1129 Uint32 n;
1130 const char * portNumberHttpsStr = Uint32ToString(
|
1131 kumpf 1.228 scratchBuffer, portNumberHttps, n);
|
1132 kumpf 1.203 MessageLoaderParms parms(
|
1133 kumpf 1.198 "src.Server.cimserver.LISTENING_ON_HTTPS_PORT",
|
1134 denise.eckstein 1.218 "Listening on HTTPS port $0.", portNumberHttpsStr);
|
1135 kumpf 1.222 Logger::put_l(
|
1136 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1137 kumpf 1.222 parms);
|
1138 kumpf 1.203 #if defined(PEGASUS_DEBUG)
1139 cout << MessageLoader::getMessage(parms) << endl;
1140 #endif
|
1141 kumpf 1.86 }
|
1142 kumpf 1.135
|
1143 h.sterling 1.159 #ifndef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
|
1144 kumpf 1.203 {
|
1145 dave.sudlik 1.205 _cimServer->addAcceptor(HTTPAcceptor::LOCAL_CONNECTION, 0, false);
|
1146 kumpf 1.86
|
1147 kumpf 1.198 MessageLoaderParms parms(
|
1148 kumpf 1.203 "src.Server.cimserver.LISTENING_ON_LOCAL",
1149 "Listening on local connection socket.");
|
1150 kumpf 1.222 Logger::put_l(
|
1151 kumpf 1.203 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1152 kumpf 1.222 parms);
|
1153 kumpf 1.203 # if defined(PEGASUS_DEBUG)
|
1154 h.sterling 1.153 cout << MessageLoader::getMessage(parms) << endl;
|
1155 kumpf 1.203 # endif
|
1156 kumpf 1.86 }
|
1157 david 1.85 #endif
|
1158 mike 1.35
|
1159 kumpf 1.198 _cimServer->bind();
|
1160 kumpf 1.199
|
1161 kumpf 1.198 // notify parent process (if there is a parent process) to terminate
|
1162 konrad.r 1.95 // so user knows that there is cimserver ready to serve CIM requests.
|
1163 kumpf 1.198 if (daemonOption)
1164 {
1165 _cimServerProcess->notify_parent(0);
1166 }
|
1167 mike 1.35
|
1168 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1169 kumpf 1.202 cout << "Started. " << endl;
|
1170 kumpf 1.63 #endif
|
1171 david.dillard 1.165
|
1172 kumpf 1.54 // Put server started message to the logger
|
1173 kumpf 1.143 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
1174 Logger::INFORMATION,
|
1175 kumpf 1.222 MessageLoaderParms(
1176 "src.Server.cimserver.STARTED_VERSION",
1177 "Started $0 version $1.",
1178 _cimServerProcess->getProductName(),
1179 _cimServerProcess->getCompleteVersion()));
|
1180 kumpf 1.45
|
1181 marek 1.190 #if defined(PEGASUS_OS_TYPE_UNIX) && !defined(PEGASUS_OS_ZOS)
|
1182 kumpf 1.178 if (daemonOption && !debugOutputOption)
|
1183 kumpf 1.202 {
|
1184 kumpf 1.178 // Direct standard input, output, and error to /dev/null,
1185 // since we are running as a daemon.
|
1186 thilo.boehm 1.211 close(STDIN_FILENO);
|
1187 kumpf 1.178 open("/dev/null", O_RDONLY);
|
1188 thilo.boehm 1.211 close(STDOUT_FILENO);
|
1189 kumpf 1.178 open("/dev/null", O_RDWR);
|
1190 thilo.boehm 1.211 close(STDERR_FILENO);
|
1191 kumpf 1.178 open("/dev/null", O_RDWR);
1192 }
1193 #endif
|
1194 kumpf 1.203 }
1195 catch (Exception& e)
1196 {
1197 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
1198 "cimserver not started: $0", e.getMessage());
|
1199 kumpf 1.222 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1200 parms);
|
1201 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
1202 kumpf 1.178
|
1203 s.kodali 1.234 deleteCIMServer();
1204
|
1205 kumpf 1.203 //
1206 // notify parent process (if there is a parent process) to terminate
1207 //
1208 if (daemonOption)
1209 _cimServerProcess->notify_parent(1);
1210
1211 return 1;
1212 }
1213
1214 // Run the main CIM Server loop
1215
1216 try
1217 {
|
1218 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
1219 thilo.boehm 1.185
|
1220 kumpf 1.202 // ARM is a z/OS internal restart facility.
1221 // This is a z/OS specific change.
|
1222 thilo.boehm 1.185
1223 // Instatiating the automatic restart manager for zOS
1224 ARM_zOS automaticRestartManager;
1225
1226 // register to zOS ARM
1227 automaticRestartManager.Register();
1228
1229 #endif
1230
|
1231 marek 1.217 #ifdef PEGASUS_ENABLE_SLP
1232 _cimServer->startSLPProvider();
|
1233 kumpf 1.228 #endif
|
1234 venkat.puvvada 1.232 _cimServer->initComplete();
1235
|
1236 mike 1.35 //
1237 // Loop to call CIMServer's runForever() method until CIMServer
1238 // has been shutdown
1239 //
|
1240 kumpf 1.202 while (!_cimServer->terminated())
1241 {
1242 _cimServer->runForever();
1243 }
|
1244 carson.hovey 1.157
|
1245 kumpf 1.45 //
1246 // normal termination
|
1247 carson.hovey 1.157 //
|
1248 kumpf 1.203
|
1249 r.kieninger 1.223 #if defined(PEGASUS_OS_ZOS)
|
1250 thilo.boehm 1.185
|
1251 kumpf 1.202 // ARM is a z/OS internal restart facility.
1252 // This is a z/OS specific change.
|
1253 thilo.boehm 1.185
1254 // register to zOS ARM
1255 automaticRestartManager.DeRegister();
1256
1257 #endif
|
1258 kumpf 1.143
|
1259 kumpf 1.54 // Put server shutdown message to the logger
|
1260 kumpf 1.222 Logger::put_l(
1261 Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1262 MessageLoaderParms(
1263 "src.Server.cimserver.STOPPED",
1264 "$0 stopped.", _cimServerProcess->getProductName()));
|
1265 mike 1.32 }
|
1266 kumpf 1.202 catch (Exception& e)
|
1267 marek 1.195 {
|
1268 kumpf 1.202 MessageLoaderParms parms(
|
1269 marek 1.195 "src.Server.cimserver.ERROR",
|
1270 kumpf 1.202 "Error: $0",
1271 e.getMessage());
|
1272 kumpf 1.222 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
1273 parms);
|
1274 kumpf 1.203 cerr << MessageLoader::getMessage(parms) << endl;
|
1275 marek 1.195
1276 deleteCIMServer();
1277 return 1;
1278 }
|
1279 mike 1.32
|
1280 h.sterling 1.156 deleteCIMServer();
|
1281 mike 1.32 return 0;
1282 }
|