1 karl 1.149 //%2005////////////////////////////////////////////////////////////////////////
|
2 mike 1.32 //
|
3 karl 1.141 // Copyright (c) 2000, 2001, 2002 BMC Software; Hewlett-Packard Development
4 // Company, L.P.; IBM Corp.; The Open Group; Tivoli Systems.
5 // Copyright (c) 2003 BMC Software; Hewlett-Packard Development Company, L.P.;
|
6 karl 1.121 // IBM Corp.; EMC Corporation, The Open Group.
|
7 karl 1.141 // Copyright (c) 2004 BMC Software; Hewlett-Packard Development Company, L.P.;
8 // IBM Corp.; EMC Corporation; VERITAS Software Corporation; The Open Group.
|
9 karl 1.149 // Copyright (c) 2005 Hewlett-Packard Development Company, L.P.; IBM Corp.;
10 // EMC Corporation; VERITAS Software Corporation; The Open Group.
|
11 mike 1.32 //
12 // Permission is hereby granted, free of charge, to any person obtaining a copy
|
13 kumpf 1.58 // of this software and associated documentation files (the "Software"), to
14 // deal in the Software without restriction, including without limitation the
15 // rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
|
16 mike 1.32 // sell copies of the Software, and to permit persons to whom the Software is
17 // furnished to do so, subject to the following conditions:
|
18 david.dillard 1.165 //
|
19 kumpf 1.58 // THE ABOVE COPYRIGHT NOTICE AND THIS PERMISSION NOTICE SHALL BE INCLUDED IN
|
20 mike 1.32 // ALL COPIES OR SUBSTANTIAL PORTIONS OF THE SOFTWARE. THE SOFTWARE IS PROVIDED
21 // "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
|
22 kumpf 1.58 // LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
23 // PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
24 // HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
25 mike 1.32 // ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
26 // WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27 //
28 //==============================================================================
29 //
30 // Author: Mike Brasher (mbrasher@bmc.com)
31 //
|
32 david.dillard 1.165 // Modified By: Mike Day (mdday@us.ibm.com)
33 // Karl Schopmeyer (k.schopmeyer@opengroup.org)
34 // Nag Boranna (nagaraja_boranna@hp.com)
35 // Jenny Yu (jenny_yu@hp.com)
36 // Sushma Fernandes (sushma_fernandes@hp.com)
|
37 kumpf 1.72 // Carol Ann Krug Graves, Hewlett-Packard Company
|
38 david.dillard 1.165 // (carolann_graves@hp.com)
39 // Yi Zhou, Hewlett-Packard Company (yi_zhou@hp.com)
40 // Dave Rosckes (rosckes@us.ibm.com)
41 // Humberto Rivero (hurivero@us.ibm.com)
42 // Steve Hills (steve.hills@ncr.com)
|
43 gs.keenan 1.150 // Sean Keenan, Hewlett-Packard Company (sean.keenan@hp.com)
|
44 david.dillard 1.165 // Amit K Arora, IBM (amitarora@in.ibm.com) - pep 167
45 // Josephine Eskaline Joyce, IBM (jojustin@in.ibm.com) - Bug#2555
46 // Josephine Eskaline Joyce, IBM (jojustin@in.ibm.com) - Bug#2032
47 // Heather Sterling, IBM (hsterl@us.ibm.com) - PEP#222
48 // Josephine Eskaline Joyce, IBM (jojustin@in.ibm.com) - Bug#3452
49 // David Dillard, VERITAS Software Corp.
50 // (david.dillard@veritas.com)
|
51 aruran.ms 1.173 // Aruran, IBM (ashanmug@in.ibm.com) for Bug# 4183
|
52 joyce.j 1.160 //
|
53 mike 1.32 //%/////////////////////////////////////////////////////////////////////////////
54
55
56 //////////////////////////////////////////////////////////////////////
57 //
|
58 carolann.graves 1.171 // Notes on daemon operation (Unix) and service operation (Win 32):
|
59 mike 1.32 //
|
60 david.dillard 1.165 // To run pegasus as a daemon on Unix platforms:
|
61 mike 1.32 //
|
62 kumpf 1.60 // cimserver
|
63 mike 1.32 //
|
64 kumpf 1.60 // To NOT run pegasus as a daemon on Unix platforms, set the daemon config
65 // property to false:
66 //
67 // cimserver daemon=false
68 //
|
69 david.dillard 1.165 // The daemon config property has no effect on windows operation.
|
70 mike 1.32 //
|
71 mike 1.35 // To shutdown pegasus, use the -s option:
|
72 david.dillard 1.165 //
73 // cimserver -s
|
74 mike 1.35 //
|
75 mike 1.32 // To run pegasus as an NT service, there are FOUR different possibilities:
76 //
|
77 david.dillard 1.165 // To INSTALL the Pegasus service,
|
78 mike 1.32 //
79 // cimserver -install
80 //
|
81 david.dillard 1.165 // To REMOVE the Pegasus service,
|
82 mike 1.32 //
83 // cimserver -remove
84 //
|
85 david.dillard 1.165 // To START the Pegasus service,
|
86 mike 1.32 //
87 // net start cimserver
|
88 s.hills 1.117 // or
89 // cimserver -start
|
90 mike 1.32 //
|
91 david.dillard 1.165 // To STOP the Pegasus service,
|
92 mike 1.32 //
93 // net stop cimserver
|
94 s.hills 1.117 // or
95 // cimserver -stop
|
96 mike 1.32 //
|
97 david.dillard 1.165 // Alternatively, you can use the windows service manager. Pegasus shows up
|
98 mike 1.32 // in the service database as "Pegasus CIM Object Manager"
99 //
100 // Mike Day, mdday@us.ibm.com
|
101 david.dillard 1.165 //
|
102 mike 1.32 //////////////////////////////////////////////////////////////////////
103
104
|
105 mike 1.35 #include <Pegasus/Common/Config.h>
|
106 kumpf 1.59 #include <Pegasus/Common/Constants.h>
|
107 jim.wunderlich 1.172 #include <Pegasus/Common/PegasusAssert.h>
|
108 mike 1.32 #include <cstdlib>
109 #include <Pegasus/Common/FileSystem.h>
|
110 mike 1.35 #include <Pegasus/Common/Monitor.h>
|
111 mike 1.32 #include <Pegasus/Common/PegasusVersion.h>
112 #include <Pegasus/Common/Logger.h>
113 #include <Pegasus/Common/System.h>
|
114 mike 1.35 #include <Pegasus/Common/Tracer.h>
|
115 kumpf 1.174 #include <Pegasus/Common/LanguageParser.h>
|
116 mike 1.35 #include <Pegasus/Config/ConfigManager.h>
117 #include <Pegasus/Client/CIMClient.h>
118 #include <Pegasus/Server/ShutdownService.h>
|
119 h.sterling 1.153 #include <Pegasus/Server/CIMServer.h>
120 #include <Service/ServerProcess.h>
|
121 mike 1.32
|
122 chuck 1.155 #if defined(PEGASUS_OS_OS400)
123 # include "vfyptrs.cinc"
124 # include "OS400ConvertChar.h"
125 #endif
126
|
127 kumpf 1.119 PEGASUS_USING_PEGASUS;
128 PEGASUS_USING_STD;
129
|
130 h.sterling 1.153 #define PEGASUS_PROCESS_NAME "cimserver";
|
131 mike 1.32
|
132 h.sterling 1.153 //Windows service variables are not defined elsewhere in the product
133 //enable ability to override these
134 #ifndef PEGASUS_SERVICE_NAME
135 #define PEGASUS_SERVICE_NAME "Pegasus CIM Object Manager";
|
136 chuck 1.66 #endif
|
137 h.sterling 1.153 #ifndef PEGASUS_SERVICE_DESCRIPTION
138 #define PEGASUS_SERVICE_DESCRIPTION "Pegasus CIM Object Manager Service";
|
139 mike 1.32 #endif
140
|
141 h.sterling 1.153 class CIMServerProcess : public ServerProcess
142 {
143 public:
144
145 CIMServerProcess(void)
146 {
147 cimserver_set_process(this);
148 }
149
150 virtual ~CIMServerProcess(void)
151 {
152 }
153
154 //defined in PegasusVersion.h
155 virtual const char* getProductName() const
156 {
157 return PEGASUS_PRODUCT_NAME;
158 }
159
160 virtual const char* getExtendedName() const
161 {
162 h.sterling 1.153 return PEGASUS_SERVICE_NAME;
163 }
164
165 virtual const char* getDescription() const
166 {
167 return PEGASUS_SERVICE_DESCRIPTION;
168 }
|
169 david.dillard 1.165
|
170 h.sterling 1.153 //defined in PegasusVersion.h
171 virtual const char* getVersion() const
172 {
173 return PEGASUS_PRODUCT_VERSION;
174 }
175
176 virtual const char* getProcessName() const
177 {
178 return PEGASUS_PROCESS_NAME;
179 }
180
181 //defined in ConfigFileDir.h
182 virtual const char* getPIDFileName() const
183 {
184 return CIMSERVER_START_FILE;
185 }
186
187 int cimserver_run(int argc, char** argv, bool shutdownOption);
188
189 void cimserver_stop(void);
190 };
191 h.sterling 1.153
192 AutoPtr<CIMServerProcess> _cimServerProcess(new CIMServerProcess());
193 static CIMServer* _cimServer = 0;
|
194 konrad.r 1.163 static Monitor* _monitor = 0;
|
195 konrad.r 1.166 static Thread* dummyInitialThread = 0;
|
196 mike 1.35 //
197 // The command name.
198 //
199 static const char COMMAND_NAME [] = "cimserver";
200
201 //
202 // The constant defining usage string.
203 //
204 static const char USAGE [] = "Usage: ";
205
206 /**
207 Constants representing the command line options.
208 */
209 static const char OPTION_VERSION = 'v';
210
211 static const char OPTION_HELP = 'h';
212
213 static const char OPTION_HOME = 'D';
214
215 static const char OPTION_SHUTDOWN = 's';
216
|
217 a.arora 1.142 static const char LONG_HELP [] = "help";
218
219 static const char LONG_VERSION [] = "version";
220
|
221 kumpf 1.48 #if defined(PEGASUS_OS_HPUX)
222 static const char OPTION_BINDVERBOSE = 'X';
223 #endif
224
|
225 kumpf 1.54 static const String PROPERTY_TIMEOUT = "shutdownTimeout";
|
226 mike 1.35
227 ConfigManager* configManager;
228
|
229 mike 1.32 /** GetOptions function - This function defines the Options Table
|
230 mike 1.35 and sets up the options from that table using the config manager.
|
231 mike 1.32 */
232 void GetOptions(
|
233 mike 1.35 ConfigManager* cm,
|
234 mike 1.32 int& argc,
|
235 s.hills 1.117 char** argv)
|
236 mike 1.32 {
|
237 mike 1.35 try
|
238 mike 1.32 {
|
239 kumpf 1.38 cm->mergeConfigFiles();
|
240 mike 1.33
|
241 mike 1.35 cm->mergeCommandLine(argc, argv);
242 }
|
243 kumpf 1.122 catch (NoSuchFile&)
|
244 mike 1.35 {
|
245 kumpf 1.122 throw;
|
246 mike 1.35 }
|
247 kumpf 1.122 catch (FileNotReadable&)
|
248 mike 1.35 {
|
249 kumpf 1.122 throw;
|
250 mike 1.35 }
|
251 kumpf 1.122 catch (CannotRenameFile&)
|
252 mike 1.35 {
|
253 kumpf 1.122 throw;
|
254 mike 1.35 }
|
255 kumpf 1.122 catch (ConfigFileSyntaxError&)
|
256 mike 1.35 {
|
257 kumpf 1.122 throw;
|
258 mike 1.35 }
|
259 kumpf 1.122 catch(UnrecognizedConfigProperty&)
|
260 mike 1.35 {
|
261 kumpf 1.122 throw;
|
262 mike 1.35 }
|
263 kumpf 1.122 catch(InvalidPropertyValue&)
|
264 mike 1.35 {
|
265 kumpf 1.122 throw;
|
266 mike 1.35 }
|
267 kumpf 1.123 catch (CannotOpenFile&)
268 {
269 throw;
270 }
|
271 mike 1.32 }
272
273 /* PrintHelp - This is temporary until we expand the options manager to allow
274 options help to be defined with the OptionRow entries and presented from
275 those entries.
276 */
277 void PrintHelp(const char* arg0)
278 {
|
279 mike 1.35 String usage = String (USAGE);
280 usage.append (COMMAND_NAME);
281 usage.append (" [ [ options ] | [ configProperty=value, ... ] ]\n");
282 usage.append (" options\n");
|
283 a.arora 1.142 usage.append (" -v, --version - displays CIM Server version number\n");
284 usage.append (" -h, --help - prints this help message\n");
|
285 humberto 1.97 usage.append (" -s - shuts down CIM Server\n");
|
286 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
287 usage.append (" -D [home] - sets pegasus home directory\n");
|
288 humberto 1.97 #endif
289 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
290 joyce.j 1.148 usage.append (" -install [name] - installs pegasus as a Windows Service\n");
|
291 humberto 1.97 usage.append (" [name] is optional and overrides the\n");
292 usage.append (" default CIM Server Service Name\n");
|
293 joyce.j 1.148 usage.append (" -remove [name] - removes pegasus as a Windows Service\n");
|
294 humberto 1.97 usage.append (" [name] is optional and overrides the\n");
295 usage.append (" default CIM Server Service Name\n");
|
296 joyce.j 1.148 usage.append (" -start [name] - starts pegasus as a Windows Service\n");
|
297 humberto 1.97 usage.append (" [name] is optional and overrides the\n");
298 usage.append (" default CIM Server Service Name\n");
|
299 joyce.j 1.148 usage.append (" -stop [name] - stops pegasus as a Windows Service\n");
|
300 humberto 1.97 usage.append (" [name] is optional and overrides the\n");
301 usage.append (" default CIM Server Service Name\n\n");
302 #endif
303 usage.append (" configProperty=value\n");
304 usage.append (" - sets CIM Server configuration property\n");
305
306 cout << endl;
|
307 h.sterling 1.153 cout << _cimServerProcess->getProductName() << " " << _cimServerProcess->getVersion() << endl;
|
308 humberto 1.97 cout << endl;
|
309 david.dillard 1.165
|
310 humberto 1.97 #if defined(PEGASUS_OS_TYPE_WINDOWS)
|
311 humberto 1.104 MessageLoaderParms parms("src.Server.cimserver.MENU.WINDOWS", usage);
|
312 kumpf 1.152 #elif defined(PEGASUS_USE_RELEASE_DIRS)
|
313 kumpf 1.138 MessageLoaderParms parms("src.Server.cimserver.MENU.HPUXLINUXIA64GNU", usage);
|
314 humberto 1.97 #else
|
315 kumpf 1.138 MessageLoaderParms parms("src.Server.cimserver.MENU.STANDARD", usage);
|
316 humberto 1.97 #endif
317 cout << MessageLoader::getMessage(parms) << endl;
|
318 mike 1.35 }
319
|
320 h.sterling 1.156 //This needs to be called at various points in the code depending on the platform and error conditions.
321 //We need to delete the _cimServer reference on exit in order for the destructors to get called.
322 void deleteCIMServer()
323 {
324 if (_cimServer)
325 {
326 delete _cimServer;
327 _cimServer = 0;
|
328 carolann.graves 1.171
329 #if defined(PEGASUS_OS_HPUX) || defined(PEGASUS_OS_LINUX) \
330 || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM) || defined(PEGASUS_OS_AIX) \
331 || defined(PEGASUS_OS_SOLARIS) || defined(PEGASUS_OS_VMS)
332 //
333 // Remove the PID file to indicate CIMServer termination
334 //
335 FileSystem::removeFile(_cimServerProcess->getPIDFileName());
336 #endif
|
337 h.sterling 1.156 }
|
338 konrad.r 1.163 if (_monitor)
339 {
340 delete _monitor;
341 }
|
342 konrad.r 1.166 if (dummyInitialThread)
343 {
344 Thread::clearLanguages();
345 delete dummyInitialThread;
346 }
|
347 h.sterling 1.156 }
348
|
349 chuck 1.96 // l10n
350 //
351 // Dummy function for the Thread object associated with the initial thread.
352 // Since the initial thread is used to process CIM requests, this is
353 // needed to localize the exceptions thrown during CIM request processing.
|
354 david.dillard 1.165 // Note: This function should never be called!
355 //
|
356 chuck 1.96 PEGASUS_THREAD_RETURN PEGASUS_THREAD_CDECL dummyThreadFunc(void *parm)
357 {
|
358 david.dillard 1.165 return((PEGASUS_THREAD_RETURN)0);
|
359 chuck 1.96 }
360
|
361 carolann.graves 1.171 //
362 // Waits until either the CIM Server has terminated, or the shutdown timeout
363 // has expired. If the shutdown timeout has expired, and the CIM Server is
364 // still running, kills the cimserver process.
365 //
366 void _waitForTerminationOrTimeout (Uint32 maxWaitTime)
367 {
368 //
369 // If the CIM Server is still running, and the shutdown timeout has not
370 // expired, loop and wait one second until either the CIM Server has
371 // terminated, or the shutdown timeout has expired
372 //
373 Boolean running = _cimServerProcess->isCIMServerRunning ();
374 while (running && (maxWaitTime > 0))
375 {
376 System::sleep (1);
377 running = _cimServerProcess->isCIMServerRunning ();
378 maxWaitTime--;
379 }
380
381 //
382 carolann.graves 1.171 // If the shutdown timeout has expired, and the CIM Server is still
383 // running, kill the cimserver process
384 //
385 if (running)
386 {
387 int kill_rc = _cimServerProcess->cimserver_kill (0);
388
389 #ifdef PEGASUS_OS_OS400
390 if (kill_rc == -1)
391 {
392 _cimServerProcess->cimserver_exitRC (2);
393 }
394 _cimServerProcess->cimserver_exitRC (1);
395 #endif
396
397 #if defined(PEGASUS_OS_HPUX) || defined(PEGASUS_PLATFORM_LINUX_GENERIC_GNU) \
398 || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM) || defined(PEGASUS_OS_SOLARIS) \
399 || defined (PEGASUS_OS_VMS)
400 if (kill_rc != -1)
401 {
402 //l10n - TODO
403 carolann.graves 1.171 Logger::put_l (Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
404 "src.Server.cimserver.TIMEOUT_EXPIRED_SERVER_KILLED",
405 "Shutdown timeout expired. Forced shutdown initiated.");
406 MessageLoaderParms parms
407 ("src.Server.cimserver.TIMEOUT_EXPIRED_SERVER_KILLED",
408 "Shutdown timeout expired. Forced shutdown initiated.");
409 cout << MessageLoader::getMessage(parms) << endl;
410 exit (0);
411 }
412 #endif
413 }
414 }
415
|
416 kumpf 1.52 void shutdownCIMOM(Uint32 timeoutValue)
|
417 mike 1.35 {
418 //
419 // Create CIMClient object
420 //
|
421 kumpf 1.42 CIMClient client;
|
422 mike 1.35
423 //
|
424 kumpf 1.53 // Get local host name
|
425 mike 1.35 //
426 String hostStr = System::getHostName();
427
428 //
|
429 david.dillard 1.165 // open connection to CIMOM
|
430 mike 1.35 //
431 try
432 {
|
433 kumpf 1.43 client.connectLocal();
|
434 kumpf 1.52
435 //
|
436 kumpf 1.63 // set client timeout to 2 seconds
|
437 kumpf 1.52 //
|
438 kumpf 1.71 client.setTimeout(2000);
|
439 mike 1.35 }
|
440 s.hills 1.117 catch(Exception&)
|
441 mike 1.35 {
|
442 david 1.85 #ifdef PEGASUS_OS_OS400
|
443 h.sterling 1.153 //l10n
444 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
445 //"Unable to connect to CIM Server. CIM Server may not be running." );
446 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
447 "src.Server.cimserver.UNABLE_CONNECT_SERVER_MAY_NOT_BE_RUNNING",
448 "Unable to connect to CIM Server. CIM Server may not be running." );
449 // The server job may still be active but not responding.
450 // Kill the job if it exists.
451 if(_cimServerProcess->cimserver_kill(0) == -1)
452 _cimServerProcess->cimserver_exitRC(2);
453 _cimServerProcess->cimserver_exitRC(1);
|
454 david 1.85 #else
|
455 humberto 1.97 //l10n
456 //PEGASUS_STD(cerr) << "Unable to connect to CIM Server." << PEGASUS_STD(endl);
457 //PEGASUS_STD(cerr) << "CIM Server may not be running." << PEGASUS_STD(endl);
458 MessageLoaderParms parms("src.Server.cimserver.UNABLE_CONNECT_SERVER_MAY_NOT_BE_RUNNING",
|
459 kumpf 1.105 "Unable to connect to CIM Server.\nCIM Server may not be running.\n");
|
460 humberto 1.97 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms);
|
461 s.hills 1.117 exit(1);
|
462 chuck 1.66 #endif
|
463 mike 1.35 }
464
465 try
466 {
467 //
|
468 kumpf 1.52 // construct CIMObjectPath
|
469 mike 1.35 //
470 String referenceStr = "//";
471 referenceStr.append(hostStr);
|
472 david.dillard 1.165 referenceStr.append("/");
|
473 kumpf 1.72 referenceStr.append(PEGASUS_NAMESPACENAME_SHUTDOWN.getString());
|
474 kumpf 1.53 referenceStr.append(":");
|
475 kumpf 1.72 referenceStr.append(PEGASUS_CLASSNAME_SHUTDOWN.getString());
|
476 kumpf 1.50 CIMObjectPath reference(referenceStr);
|
477 mike 1.35
478 //
479 // issue the invokeMethod request on the shutdown method
480 //
481 Array<CIMParamValue> inParams;
482 Array<CIMParamValue> outParams;
483
|
484 kumpf 1.52 // set force option to true for now
|
485 kumpf 1.40 inParams.append(CIMParamValue("force",
|
486 kumpf 1.52 CIMValue(Boolean(true))));
|
487 mike 1.35
|
488 kumpf 1.40 inParams.append(CIMParamValue("timeout",
|
489 kumpf 1.39 CIMValue(Uint32(timeoutValue))));
|
490 mike 1.35
491 CIMValue retValue = client.invokeMethod(
|
492 kumpf 1.59 PEGASUS_NAMESPACENAME_SHUTDOWN,
|
493 mike 1.35 reference,
494 "shutdown",
495 inParams,
496 outParams);
|
497 kumpf 1.43 }
|
498 kumpf 1.65 catch(CIMException& e)
|
499 kumpf 1.46 {
|
500 david 1.85 #ifdef PEGASUS_OS_OS400
501
|
502 h.sterling 1.153 if (e.getCode() == CIM_ERR_INVALID_NAMESPACE)
503 {
504 //l10n
505 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
506 //"Failed to shutdown server: $0", "The repository may be empty.");
507 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
508 "src.Server.cimserver.SHUTDOWN_FAILED_REPOSITORY_EMPTY",
509 "Error in server shutdown: The repository may be empty.");
510 }
511 else
512 {
513 //l10n
514 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
515 //"Failed to shutdown server: $0", e.getMessage());
516 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
517 "src.Server.cimserver.SHUTDOWN_FAILED",
518 "Error in server shutdown: $0", e.getMessage());
519 }
520 // Kill the server job.
521 if(_cimServerProcess->cimserver_kill(0) == -1)
522 _cimServerProcess->cimserver_exitRC(2);
|
523 david 1.85 #else
|
524 kumpf 1.105 //l10n - TODO
|
525 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.SHUTDOWN_FAILED",
|
526 kumpf 1.105 "Error in server shutdown: ");
|
527 humberto 1.97 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms);
|
528 kumpf 1.63 if (e.getCode() == CIM_ERR_INVALID_NAMESPACE)
529 {
|
530 kumpf 1.105 //
|
531 david.dillard 1.165 // Repository may be empty.
|
532 kumpf 1.105 //
533 //l10n - TODO
534 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
535 "src.Server.cimserver.SHUTDOWN_FAILED_REPOSITORY_EMPTY",
536 "Error in server shutdown: The repository may be empty.");
|
537 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.REPOSITORY_EMPTY",
|
538 kumpf 1.105 "The repository may be empty.");
539 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms) << PEGASUS_STD(endl);
|
540 kumpf 1.63 }
541 else
542 {
|
543 kumpf 1.105 //l10n - TODO
544 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
545 "src.Server.cimserver.SHUTDOWN_FAILED",
546 "Error in server shutdown: $0", e.getMessage());
|
547 kumpf 1.63 PEGASUS_STD(cerr) << e.getMessage() << PEGASUS_STD(endl);
548 }
|
549 kumpf 1.105
|
550 david.dillard 1.165 // Kill the cimserver process
|
551 h.sterling 1.153 if (_cimServerProcess->cimserver_kill(0) == 0)
|
552 kumpf 1.105 {
553 //l10n - TODO
554 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
555 "src.Server.cimserver.SERVER_FORCED_SHUTDOWN",
|
556 h.sterling 1.153 "Forced shutdown initiated.");
|
557 kumpf 1.105 MessageLoaderParms parms("src.Server.cimserver.SERVER_FORCED_SHUTDOWN",
558 "Forced shutdown initiated.");
559 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms) << PEGASUS_STD(endl);
560 }
|
561 s.hills 1.117 exit(1);
|
562 chuck 1.66 #endif
|
563 kumpf 1.46 }
|
564 s.hills 1.117 catch(Exception&)
|
565 kumpf 1.45 {
566 //
|
567 kumpf 1.91 // This may mean that the CIM Server has terminated, causing this
568 // client to get a "Empty HTTP response message" exception. It may
|
569 david.dillard 1.165 // also mean that the CIM Server is taking longer than 2 seconds
570 // (client timeout value) to terminate, causing this client to
|
571 kumpf 1.91 // timeout with a "connection timeout" exception.
|
572 kumpf 1.45 //
|
573 carolann.graves 1.171 // Wait until either the CIM Server has terminated, or the shutdown
574 // timeout has expired. If the timeout has expired and the CIM Server
575 // is still running, kill the cimserver process.
576 //
577 _waitForTerminationOrTimeout (timeoutValue - 2);
|
578 kumpf 1.168 }
579
|
580 carolann.graves 1.171 //
581 // InvokeMethod succeeded.
582 // Wait until either the CIM Server has terminated, or the shutdown
583 // timeout has expired. If the timeout has expired and the CIM Server
584 // is still running, kill the cimserver process.
585 //
586 _waitForTerminationOrTimeout (timeoutValue);
|
587 mike 1.35 return;
|
588 mike 1.32 }
589
|
590 mike 1.35
|
591 mike 1.33 /////////////////////////////////////////////////////////////////////////
|
592 mike 1.32 // MAIN
593 //////////////////////////////////////////////////////////////////////////
594 int main(int argc, char** argv)
595 {
|
596 mike 1.35 String pegasusHome = String::EMPTY;
597 Boolean shutdownOption = false;
|
598 mday 1.47
|
599 humberto 1.97 //l10n
600 // Set Message loading to process locale
|
601 david.dillard 1.165 MessageLoader::_useProcessLocale = true;
|
602 humberto 1.97 //l10n
603
|
604 kv.le 1.140 //l10n
605 #if defined(PEGASUS_OS_AIX) && defined(PEGASUS_HAS_MESSAGES)
606 setlocale(LC_ALL, "");
607 #endif
608
|
609 chuck 1.66 #ifdef PEGASUS_OS_OS400
|
610 david 1.120
611 VFYPTRS_INCDCL; // VFYPTRS local variables
612
613 // verify pointers
614 #pragma exception_handler (qsyvp_excp_hndlr,qsyvp_excp_comm_area,\
615 0,_C2_MH_ESCAPE)
616 for( int arg_index = 1; arg_index < argc; arg_index++ ){
|
617 h.sterling 1.153 VFYPTRS(VERIFY_SPP_NULL(argv[arg_index]));
|
618 david 1.120 }
619 #pragma disable_handler
620
|
621 david 1.100 // Convert the args to ASCII
622 for(Uint32 i = 0;i< argc;++i)
623 {
|
624 h.sterling 1.153 EtoA(argv[i]);
|
625 david 1.100 }
626
|
627 chuck 1.66 // Initialize Pegasus home to the shipped OS/400 directory.
628 pegasusHome = OS400_DEFAULT_PEGASUS_HOME;
629 #endif
630
|
631 kv.le 1.134
|
632 tony 1.82 #ifndef PEGASUS_OS_TYPE_WINDOWS
|
633 kumpf 1.38 //
634 // Get environment variables:
635 //
|
636 david 1.100 #ifdef PEGASUS_OS_OS400
637 #pragma convert(37)
638 const char* tmp = getenv("PEGASUS_HOME");
639 #pragma convert(0)
640 char home[256] = {0};
641 if (tmp && strlen(tmp) < 256)
642 {
|
643 h.sterling 1.153 strcpy(home, tmp);
644 EtoA(home);
645 pegasusHome = home;
|
646 david 1.100 }
647 #else
|
648 kv.le 1.134 #if defined(PEGASUS_OS_AIX) && defined(PEGASUS_USE_RELEASE_DIRS)
649 pegasusHome = AIX_RELEASE_PEGASUS_HOME;
|
650 marek 1.170 #elif !defined(PEGASUS_USE_RELEASE_DIRS) || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM)
|
651 kumpf 1.38 const char* tmp = getenv("PEGASUS_HOME");
652
653 if (tmp)
654 {
655 pegasusHome = tmp;
656 }
|
657 kv.le 1.134 #endif
|
658 david 1.100 #endif
|
659 kumpf 1.38
660 FileSystem::translateSlashes(pegasusHome);
|
661 tony 1.82 #else
|
662 kumpf 1.38
|
663 tony 1.82 // windows only
|
664 h.sterling 1.153 //setHome(pegasusHome);
665 pegasusHome = _cimServerProcess->getHome();
|
666 tony 1.82 #endif
|
667 mike 1.32
|
668 kumpf 1.60 // Get help, version, and shutdown options
|
669 mike 1.35
670 for (int i = 1; i < argc; )
671 {
672 const char* arg = argv[i];
|
673 a.arora 1.142 if(String::equal(arg,"--help"))
674 {
675 PrintHelp(argv[0]);
676 exit(0);
677 }
678 else if(String::equal(arg,"--version"))
679 {
|
680 h.sterling 1.153 cout << _cimServerProcess->getVersion() << endl;
|
681 a.arora 1.142 exit(0);
682 }
|
683 mike 1.35 // Check for -option
|
684 a.arora 1.142 else if (*arg == '-')
|
685 mike 1.35 {
686 // Get the option
687 const char* option = arg + 1;
688
689 //
690 // Check to see if user asked for the version (-v option):
691 //
|
692 tony 1.83 if (*option == OPTION_VERSION &&
693 strlen(option) == 1)
|
694 mike 1.35 {
|
695 h.sterling 1.153 cout << _cimServerProcess->getVersion() << endl;
|
696 mike 1.35 exit(0);
697 }
698 //
699 // Check to see if user asked for help (-h option):
700 //
|
701 tony 1.83 else if (*option == OPTION_HELP &&
702 (strlen(option) == 1))
|
703 mike 1.35 {
704 PrintHelp(argv[0]);
705 exit(0);
706 }
|
707 kumpf 1.138 #if !defined(PEGASUS_USE_RELEASE_DIRS)
|
708 tony 1.83 else if (*option == OPTION_HOME &&
709 (strlen(option) == 1))
|
710 mike 1.35 {
|
711 kumpf 1.60 if (i + 1 < argc)
|
712 mike 1.35 {
713 pegasusHome.assign(argv[i + 1]);
714 }
715 else
716 {
|
717 humberto 1.97 //l10n
718 //cout << "Missing argument for option -" << option << endl;
|
719 humberto 1.99 String opt(option);
|
720 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.MISSING_ARGUMENT",
|
721 h.sterling 1.153 "Missing argument for option -$0",
722 opt);
723 cout << MessageLoader::getMessage(parms) << endl;
|
724 mike 1.35 exit(0);
725 }
726
727 memmove(&argv[i], &argv[i + 2], (argc-i-1) * sizeof(char*));
728 argc -= 2;
729 }
|
730 kumpf 1.63 #endif
|
731 kumpf 1.48 #if defined(PEGASUS_OS_HPUX)
732 //
|
733 kumpf 1.49 // Check to see if user asked for the version (-X option):
|
734 kumpf 1.48 //
|
735 tony 1.83 if (*option == OPTION_BINDVERBOSE &&
736 (strlen(option) == 1))
|
737 kumpf 1.48 {
|
738 h.sterling 1.153 System::bindVerbose = true;
|
739 humberto 1.97 //l10n
|
740 david.dillard 1.165 //cout << "Unsupported debug option, BIND_VERBOSE, enabled."
|
741 humberto 1.97 //<< endl;
742 MessageLoaderParms parms("src.Server.cimserver.UNSUPPORTED_DEBUG_OPTION",
|
743 h.sterling 1.153 "Unsupported debug option, BIND_VERBOSE, enabled.");
744 cout << MessageLoader::getMessage(parms) << endl;
|
745 kumpf 1.48 // remove the option from the command line
746 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
747 david.dillard 1.165 argc--;
|
748 kumpf 1.48 }
749 #endif
|
750 mike 1.35 //
751 // Check to see if user asked for shutdown (-s option):
752 //
|
753 tony 1.82 else if (*option == OPTION_SHUTDOWN &&
754 (strlen(option) == 1))
|
755 mike 1.35 {
756 //
|
757 kumpf 1.52 // Check to see if shutdown has already been specified:
|
758 mike 1.35 //
|
759 kumpf 1.52 if (shutdownOption)
|
760 mike 1.35 {
|
761 humberto 1.97 //l10n
762 //cout << "Duplicate shutdown option specified." << endl;
763 MessageLoaderParms parms("src.Server.cimserver.DUPLICATE_SHUTDOWN_OPTION",
|
764 h.sterling 1.153 "Duplicate shutdown option specified.");
|
765 david.dillard 1.165
|
766 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
767 mike 1.35 exit(0);
768 }
769
|
770 kumpf 1.52 shutdownOption = true;
|
771 david.dillard 1.165
|
772 mike 1.35 // remove the option from the command line
773 memmove(&argv[i], &argv[i + 1], (argc-i) * sizeof(char*));
|
774 david.dillard 1.165 argc--;
|
775 mike 1.35 }
776 else
777 i++;
778 }
779 else
780 i++;
|
781 mike 1.32 }
|
782 mike 1.35
|
783 kumpf 1.38 //
784 // Set the value for pegasusHome property
785 //
786 ConfigManager::setPegasusHome(pegasusHome);
|
787 mike 1.32
|
788 mike 1.35 //
|
789 carolann.graves 1.171 // Do the platform specific run
|
790 s.hills 1.117 //
791
|
792 h.sterling 1.153 return _cimServerProcess->platform_run( argc, argv, shutdownOption );
|
793 s.hills 1.117 }
794
|
795 h.sterling 1.153 void CIMServerProcess::cimserver_stop()
796 {
797 _cimServer->shutdownSignal();
798 }
|
799 s.hills 1.117
800 //
801 // The main, common, running code
802 //
|
803 david.dillard 1.165 // NOTE: Do NOT call exit(). Use return(), otherwise some platforms
|
804 s.hills 1.117 // will fail to shutdown properly/cleanly.
805 //
|
806 david.dillard 1.165 // TODO: Current change minimal for platform "service" shutdown bug fixes.
|
807 carolann.graves 1.171 // Perhaps further extract out common stuff and put into main(), put
|
808 david.dillard 1.165 // daemon stuff into platform specific platform_run(), etc.
809 // Note: make sure to not put error handling stuff that platform
|
810 carolann.graves 1.171 // specific runs may need to deal with better (instead of exit(), etc).
|
811 s.hills 1.117 //
812
|
813 h.sterling 1.153 int CIMServerProcess::cimserver_run( int argc, char** argv, Boolean shutdownOption )
|
814 s.hills 1.117 {
815 String logsDirectory = String::EMPTY;
816 Boolean daemonOption = false;
817
818 //
|
819 mike 1.35 // Get an instance of the Config Manager.
820 //
821 configManager = ConfigManager::getInstance();
|
822 kumpf 1.136 configManager->useConfigFiles = true;
|
823 mike 1.35
|
824 lucier 1.130 #ifdef PEGASUS_OS_OS400
825 // In a special startup case for IBM OS400, when the server is
826 // automatically started when the machine starts up the config
827 // file cannot be read because of access restrictions for the
828 // user starting the server. In this case, we need to skip
829 // reading the config options and therefore any use of the config
830 // manager also. To make this determinations we will check to see
831 // if the daemon flag is set to true. If so, then there will be a
832 // series of checks to bracket all the calls to the configManager
833 // which would otherwise fail. All this will only be done for
834 // IBM OS400.
835
836 Boolean os400StartupOption = false;
837 // loop through args to check for daemon=true
838 for (int i=1; i < argc; i++)
839 if (strcmp(argv[i], "daemon=true") == 0)
840 {
841 os400StartupOption = true;
842 daemonOption = true;
843 }
|
844 chuck 1.164
845 if (!os400StartupOption)
846 {
847 // If this is the server job, then set the job
848 // to save the job log.
849 system ("QSYS/CHGJOB JOB(*) LOG(4 00 *SECLVL)");
850 }
|
851 david.dillard 1.165 #endif
|
852 lucier 1.130
|
853 mike 1.35 //
|
854 mike 1.32 // Get options (from command line and from configuration file); this
|
855 mike 1.35 // removes corresponding options and their arguments from the command
|
856 mike 1.32 // line.
|
857 mike 1.35 //
|
858 mike 1.32 try
859 {
|
860 lucier 1.130 #ifdef PEGASUS_OS_OS400
861 if (os400StartupOption == false)
|
862 david.dillard 1.165 #endif
|
863 s.hills 1.117 GetOptions(configManager, argc, argv);
|
864 mike 1.32 }
865 catch (Exception& e)
866 {
|
867 kumpf 1.127 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
868 "src.Server.cimserver.SERVER_NOT_STARTED",
869 "cimserver not started: $0", e.getMessage());
870
871 #if !defined(PEGASUS_OS_OS400)
872 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
873 "cimserver not started: $0", e.getMessage());
874
875 PEGASUS_STD(cerr) << argv[0] << ": " << MessageLoader::getMessage(parms)
876 << PEGASUS_STD(endl);
|
877 david 1.85 #endif
|
878 kumpf 1.127
|
879 s.hills 1.117 return(1);
|
880 mike 1.32 }
881
|
882 chuck 1.94 // l10n
|
883 h.sterling 1.153 // Set the home directory, msg sub-dir, into the MessageLoader.
|
884 david.dillard 1.165 // This will be the default directory where the resource bundles
885 // are found.
|
886 h.sterling 1.153 MessageLoader::setPegasusMsgHome(ConfigManager::getHomedPath(
|
887 david.dillard 1.165 ConfigManager::getInstance()->getCurrentValue("messageDir")));
|
888 chuck 1.94
|
889 lucier 1.130 #ifdef PEGASUS_OS_OS400
890 // Still need to declare and set the connection variables.
891 // Will initialize to false since they are fixed at false for OS400.
892
893 // NOTE: OS400 is a LOCAL_DOMAIN_SOCKET, so a few lines down
894 // the test will not be compiled in. If OS400 ever turns off that
895 // define, then we will need to change this code path to insure that
|
896 david.dillard 1.165 // one of the variables is true.
|
897 lucier 1.130 Boolean enableHttpConnection = false;
898 Boolean enableHttpsConnection = false;
|
899 kumpf 1.135 Boolean enableSSLExportClientVerification = false;
|
900 lucier 1.130
901 if (os400StartupOption == false)
902 {
903 enableHttpConnection = String::equal(
904 configManager->getCurrentValue("enableHttpConnection"), "true");
905 enableHttpsConnection = String::equal(
906 configManager->getCurrentValue("enableHttpsConnection"), "true");
|
907 kumpf 1.135 enableSSLExportClientVerification = String::equal(
908 configManager->getCurrentValue("enableSSLExportClientVerification"), "true");
|
909 lucier 1.130 }
910 #else
|
911 kumpf 1.87 Boolean enableHttpConnection = String::equal(
912 configManager->getCurrentValue("enableHttpConnection"), "true");
913 Boolean enableHttpsConnection = String::equal(
914 configManager->getCurrentValue("enableHttpsConnection"), "true");
|
915 kumpf 1.135 Boolean enableSSLExportClientVerification = String::equal(
916 configManager->getCurrentValue("enableSSLExportClientVerification"), "true");
|
917 lucier 1.130 #endif
|
918 kumpf 1.86
919 // Make sure at least one connection is enabled
|
920 h.sterling 1.159 #ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
|
921 kumpf 1.86 if (!enableHttpConnection && !enableHttpsConnection)
922 {
|
923 humberto 1.97 //l10n
924 //Logger::put(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
925 //"Neither HTTP nor HTTPS connection is enabled. "
926 //"CIMServer will not be started.");
927 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
|
928 h.sterling 1.153 "src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
|
929 humberto 1.97 "Neither HTTP nor HTTPS connection is enabled. CIMServer will not be started.");
930 //cerr << "Neither HTTP nor HTTPS connection is enabled. "
931 //"CIMServer will not be started." << endl;
932 MessageLoaderParms parms("src.Server.cimserver.HTTP_NOT_ENABLED_SERVER_NOT_STARTING",
|
933 h.sterling 1.153 "Neither HTTP nor HTTPS connection is enabled. CIMServer will not be started.");
|
934 humberto 1.97 cerr << MessageLoader::getMessage(parms) << endl;
|
935 s.hills 1.117 return(1);
|
936 kumpf 1.86 }
937 #endif
938
|
939 mike 1.35 try
|
940 mike 1.32 {
|
941 mike 1.35 //
942 // Check to see if we should Pegasus as a daemon
943 //
944
945 if (String::equal(configManager->getCurrentValue("daemon"), "true"))
946 {
947 daemonOption = true;
948 }
|
949 david.dillard 1.165
|
950 lucier 1.130 #ifdef PEGASUS_OS_OS400
951 if (os400StartupOption == false)
952 {
|
953 david.dillard 1.165 #endif
|
954 kumpf 1.36 // Get the log file directory definition.
955 // We put String into Cstring because
956 // Directory functions only handle Cstring.
957 // ATTN-KS: create String based directory functions.
|
958 konrad.r 1.161 #if !defined(PEGASUS_USE_SYSLOGS)
959 // When using syslog facility. No files anymore.
|
960 kumpf 1.36 logsDirectory = configManager->getCurrentValue("logdir");
|
961 david.dillard 1.165 logsDirectory =
|
962 h.sterling 1.153 ConfigManager::getHomedPath(configManager->getCurrentValue("logdir"));
|
963 konrad.r 1.161 #endif
|
964 lucier 1.130 #ifdef PEGASUS_OS_OS400
965 } // end if (os400StartupOption == false)
966 #endif
|
967 kumpf 1.36
968 // Set up the Logger. This does not open the logs
969 // Might be more logical to clean before set.
970 // ATTN: Need tool to completely disable logging.
971
|
972 david 1.85 #if !defined(PEGASUS_OS_HPUX) && !defined(PEGASUS_PLATFORM_LINUX_IA64_GNU) && \
|
973 konrad.r 1.161 !defined(PEGASUS_OS_OS400) && !defined(PEGASUS_USE_SYSLOGS)
|
974 kumpf 1.36 Logger::setHomeDirectory(logsDirectory);
|
975 kumpf 1.57 #endif
|
976 kumpf 1.36
977 //
|
978 david.dillard 1.165 // Check to see if we need to shutdown CIMOM
|
979 mike 1.35 //
980 if (shutdownOption)
981 {
|
982 david.dillard 1.165 String configTimeout =
|
983 kumpf 1.60 configManager->getCurrentValue("shutdownTimeout");
|
984 s.hills 1.117 Uint32 timeoutValue = strtol(configTimeout.getCString(), (char **)0, 10);
|
985 david.dillard 1.165
|
986 kumpf 1.52 shutdownCIMOM(timeoutValue);
|
987 kumpf 1.45
|
988 david 1.85 #ifdef PEGASUS_OS_OS400
|
989 h.sterling 1.153 //l10n
990 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::INFORMATION,
|
991 david.dillard 1.165 //"CIM Server stopped.");
|
992 h.sterling 1.153 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::INFORMATION,
993 "src.Server.cimserver.SERVER_STOPPED",
994 "CIM Server stopped.");
|
995 s.hills 1.117 cimserver_exitRC(0);
|
996 david 1.85 #else
|
997 h.sterling 1.153 //l10n
|
998 humberto 1.97 //cout << "CIM Server stopped." << endl;
999 MessageLoaderParms parms("src.Server.cimserver.SERVER_STOPPED",
|
1000 h.sterling 1.153 "CIM Server stopped.");
|
1001 humberto 1.106
|
1002 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
1003 s.hills 1.117 return(0);
|
1004 diane 1.81 #endif
|
1005 mike 1.35 }
|
1006 mike 1.32
|
1007 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1008 kumpf 1.36 // Leave this in until people get familiar with the logs.
|
1009 humberto 1.97 //l10n
1010 //cout << "Logs Directory = " << logsDirectory << endl;
|
1011 konrad.r 1.161 #if !defined(PEGASUS_USE_SYSLOGS)
|
1012 humberto 1.97 MessageLoaderParms parms("src.Server.cimserver.LOGS_DIRECTORY",
|
1013 h.sterling 1.153 "Logs Directory = ");
|
1014 humberto 1.97 cout << MessageLoader::getMessage(parms) << logsDirectory << endl;
|
1015 kumpf 1.57 #endif
|
1016 konrad.r 1.161 #endif
|
1017 mike 1.32 }
|
1018 kumpf 1.122 catch (UnrecognizedConfigProperty& e)
|
1019 mike 1.32 {
|
1020 david 1.85
1021 #ifdef PEGASUS_OS_OS400
|
1022 h.sterling 1.153 //l10n
1023 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
|
1024 david.dillard 1.165 //"Error: $0",e.getMessage());
|
1025 h.sterling 1.153 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1026 "src.Server.cimserver.ERROR",
|
1027 david.dillard 1.165 "Error: $0",e.getMessage());
|
1028 david 1.85 #else
|
1029 h.sterling 1.153 //l10n
1030 //cout << "Error: " << e.getMessage() << endl;
1031 MessageLoaderParms parms("src.Server.cimserver.ERROR",
1032 "Error: $0",
1033 e.getMessage());
1034 cout << MessageLoader::getMessage(parms) << endl;
|
1035 david 1.85 #endif
|
1036 mike 1.32 }
1037
|
1038 h.sterling 1.158 // Bug 2148 - Here is the order of operations for determining the server HTTP and HTTPS ports.
1039 // 1) If the user explicitly specified a port, use it.
1040 // 2) If the user did not specify a port, get the port from the services file.
1041 // 3) If no value is specified in the services file, use the IANA WBEM default port.
1042 // Note that 2 and 3 are done within the System::lookupPort method
1043 // An empty string from the ConfigManager implies that the user did not specify a port.
1044
|
1045 w.otsuka 1.147 Uint32 portNumberHttps=0;
1046 Uint32 portNumberHttp=0;
1047 Uint32 portNumberExportHttps=0;
|
1048 kumpf 1.53
|
1049 kumpf 1.86 if (enableHttpsConnection)
|
1050 kumpf 1.53 {
|
1051 kumpf 1.86 String httpsPort = configManager->getCurrentValue("httpsPort");
|
1052 h.sterling 1.158 if (httpsPort == String::EMPTY)
|
1053 joyce.j 1.144 {
|
1054 h.sterling 1.158 //
1055 // Look up the WBEM-HTTPS port number
1056 //
1057 portNumberHttps = System::lookupPort(WBEM_HTTPS_SERVICE_NAME, WBEM_DEFAULT_HTTPS_PORT);
1058
1059 } else
|
1060 david.dillard 1.165 {
|
1061 h.sterling 1.158 //
1062 // user-specified
1063 //
1064 CString portString = httpsPort.getCString();
1065 char* end = 0;
1066 portNumberHttps = strtol(portString, &end, 10);
1067 if(!(end != 0 && *end == '\0'))
1068 {
|
1069 joyce.j 1.160 InvalidPropertyValue e("httpsPort", httpsPort);
|
1070 aruran.ms 1.173 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1071 "src.Server.cimserver.SERVER_NOT_STARTED",
1072 "cimserver not started: $0", e.getMessage());
1073 #if !defined(PEGASUS_OS_OS400)
1074 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
1075 "cimserver not started: $0", e.getMessage());
1076 PEGASUS_STD(cerr) << argv[0] << ": " << MessageLoader::getMessage(parms)
1077 << PEGASUS_STD(endl);
1078 #endif
|
1079 h.sterling 1.158 exit(1);
1080 }
|
1081 joyce.j 1.144 }
|
1082 kumpf 1.53 }
|
1083 kumpf 1.86
1084 if (enableHttpConnection)
|
1085 kumpf 1.53 {
|
1086 kumpf 1.86 String httpPort = configManager->getCurrentValue("httpPort");
|
1087 h.sterling 1.158 if (httpPort == String::EMPTY)
|
1088 joyce.j 1.144 {
|
1089 h.sterling 1.158 //
1090 // Look up the WBEM-HTTP port number
1091 //
1092 portNumberHttp = System::lookupPort(WBEM_HTTP_SERVICE_NAME, WBEM_DEFAULT_HTTP_PORT);
1093
1094 } else
1095 {
1096 //
1097 // user-specified
1098 //
1099 CString portString = httpPort.getCString();
1100 char* end = 0;
1101 portNumberHttp = strtol(portString, &end, 10);
1102 if(!(end != 0 && *end == '\0'))
1103 {
|
1104 joyce.j 1.160 InvalidPropertyValue e("httpPort", httpPort);
|
1105 aruran.ms 1.173 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1106 "src.Server.cimserver.SERVER_NOT_STARTED",
1107 "cimserver not started: $0", e.getMessage());
1108 #if !defined(PEGASUS_OS_OS400)
1109 MessageLoaderParms parms("src.Server.cimserver.SERVER_NOT_STARTED",
1110 "cimserver not started: $0", e.getMessage());
1111 PEGASUS_STD(cerr) << argv[0] << ": " << MessageLoader::getMessage(parms)
1112 << PEGASUS_STD(endl);
1113 #endif
|
1114 h.sterling 1.158 exit(1);
1115 }
|
1116 joyce.j 1.144 }
|
1117 kumpf 1.53 }
|
1118 mike 1.32
|
1119 h.sterling 1.158
|
1120 kumpf 1.135 if (enableSSLExportClientVerification)
1121 {
1122 //
1123 // No config property is looked up to get the default port number.
1124 // Lookup the port defined in /etc/services for the service name
1125 // wbem-exp-https and bind to that port. If the service is not defined
1126 // then log a warning message and do not start the cimserver.
1127 //
1128 Uint32 port = 0;
1129
1130 portNumberExportHttps = System::lookupPort(WBEM_EXPORT_HTTPS_SERVICE_NAME, port);
1131
1132 if (portNumberExportHttps == 0)
1133 {
1134 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
1135 "src.Server.cimserver.EXPORT_HTTPS_PORT_NOT_DEFINED",
1136 "Port not defined for the service wbem-exp-https. CIMServer will not be started.");
1137
1138 MessageLoaderParms parms("src.Server.cimserver.EXPORT_HTTPS_PORT_NOT_DEFINED",
1139 "Port not defined for the service wbem-exp-https. CIMServer will not be started.");
1140
1141 kumpf 1.135 cerr << MessageLoader::getMessage(parms) << endl;
1142
1143 return(1);
1144 }
1145 }
|
1146 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1147 mike 1.32 // Put out startup up message.
|
1148 h.sterling 1.153 cout << _cimServerProcess->getProductName() << " " << _cimServerProcess->getVersion() << endl;
|
1149 humberto 1.97 //l10n
1150 //cout << "Built " << __DATE__ << " " << __TIME__ << endl;
1151 //cout <<"Starting..."
1152 MessageLoaderParms parms("src.Server.cimserver.STARTUP_MESSAGE",
|
1153 h.sterling 1.153 "Built $0 $1\nStarting...",
1154 __DATE__,
1155 __TIME__);
|
1156 humberto 1.97 #endif
1157
1158 //l10n
1159 // reset message loading to NON-process locale
|
1160 david.dillard 1.165 MessageLoader::_useProcessLocale = false;
|
1161 humberto 1.97 //l10n
|
1162 mike 1.32
|
1163 kumpf 1.137 // Get the parent's PID before forking
|
1164 h.sterling 1.154 _cimServerProcess->set_parent_pid(System::getPID());
|
1165 david.dillard 1.165
|
1166 kumpf 1.63 // do we need to run as a daemon ?
1167 if (daemonOption)
1168 {
|
1169 h.sterling 1.153 if(-1 == _cimServerProcess->cimserver_fork())
|
1170 diane 1.81 #ifndef PEGASUS_OS_OS400
|
1171 h.sterling 1.153 {
1172 return(-1);
1173 }
|
1174 diane 1.81 #else
|
1175 h.sterling 1.153 {
|
1176 david 1.85 return(-1);
|
1177 h.sterling 1.153 }
1178 else
1179 {
1180 return(0);
1181 }
|
1182 diane 1.81 #endif
|
1183 david.dillard 1.165
|
1184 kumpf 1.63 }
|
1185 chuck 1.66
|
1186 chuck 1.96 // l10n
1187 // Now we are after the fork...
1188 // Create a dummy Thread object that can be used to store the
1189 // AcceptLanguages object for CIM requests that are serviced
1190 // by this thread (initial thread of server). Need to do this
1191 // because this thread is not in a ThreadPool, but is used
1192 // to service CIM requests.
1193 // The run function for the dummy Thread should never be called,
|
1194 konrad.r 1.166 dummyInitialThread = new Thread(dummyThreadFunc, NULL, false);
|
1195 david.dillard 1.165 Thread::setCurrent(dummyInitialThread);
|
1196 humberto 1.108 AcceptLanguages default_al;
1197 try{
|
1198 kumpf 1.174 default_al = LanguageParser::getDefaultAcceptLanguages();
|
1199 h.sterling 1.153 Thread::setLanguages(new AcceptLanguages(default_al));
|
1200 kumpf 1.122 }catch(InvalidAcceptLanguageHeader& e){
|
1201 h.sterling 1.153 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1202 "src.Server.cimserver.FAILED_TO_SET_PROCESS_LOCALE",
|
1203 david.dillard 1.165 "Could not convert the system process locale into a valid AcceptLanguage format.");
|
1204 h.sterling 1.153 Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
|
1205 david.dillard 1.165 e.getMessage());
|
1206 humberto 1.108 }
|
1207 david.dillard 1.165
1208
|
1209 chuck 1.96
|
1210 chuck 1.66 #ifdef PEGASUS_OS_OS400
1211 // Special server initialization code for OS/400.
1212 if (cimserver_initialize() != 0)
1213 {
|
1214 h.sterling 1.153 // do some logging here!
1215 //l10n
1216 //Logger::put(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
|
1217 david.dillard 1.165 //"CIM Server failed to initialize");
|
1218 h.sterling 1.153 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1219 "src.Server.cimserver.SERVER_FAILED_TO_INITIALIZE",
|
1220 david.dillard 1.165 "CIM Server failed to initialize");
|
1221 h.sterling 1.153 return(-1);
|
1222 david.dillard 1.165 }
|
1223 chuck 1.66 #endif
|
1224 chuck 1.96
|
1225 kumpf 1.167 #ifndef PEGASUS_OS_TYPE_WINDOWS
1226 umask(S_IRWXG|S_IRWXO);
1227 #endif
|
1228 mday 1.62
|
1229 gs.keenan 1.150 #if defined(PEGASUS_OS_HPUX) || defined(PEGASUS_PLATFORM_LINUX_GENERIC_GNU) \
1230 || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM) || defined(PEGASUS_OS_AIX) \
|
1231 jim.wunderlich 1.169 || defined(PEGASUS_OS_SOLARIS) || defined (PEGASUS_OS_VMS)
|
1232 kumpf 1.79
1233 //
1234 // check if CIMServer is already running
|
1235 david.dillard 1.165 // if CIMServer is already running, print message and
|
1236 kumpf 1.79 // notify parent process (if there is a parent process) to terminate
1237 //
|
1238 h.sterling 1.153 if(_cimServerProcess->isCIMServerRunning())
|
1239 kumpf 1.79 {
|
1240 h.sterling 1.153 //l10n
1241 //cout << "Unable to start CIMServer." << endl;
1242 //cout << "CIMServer is already running." << endl;
1243 MessageLoaderParms parms("src.Server.cimserver.UNABLE_TO_START_SERVER_ALREADY_RUNNING",
1244 "Unable to start CIMServer.\nCIMServer is already running.");
1245 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms) << PEGASUS_STD(endl);
|
1246 kumpf 1.79
|
1247 h.sterling 1.153 //
|
1248 kumpf 1.79 // notify parent process (if there is a parent process) to terminate
1249 //
1250 if (daemonOption)
|
1251 h.sterling 1.153 _cimServerProcess->notify_parent(1);
|
1252 kumpf 1.79
|
1253 s.hills 1.117 return(1);
|
1254 kumpf 1.79 }
|
1255 david.dillard 1.165
|
1256 kumpf 1.63 #endif
|
1257 kumpf 1.51
|
1258 mike 1.32 // try loop to bind the address, and run the server
1259 try
1260 {
|
1261 mday 1.116
|
1262 konrad.r 1.163 _monitor = new Monitor();
|
1263 h.sterling 1.153 //PEP#222
1264 //CIMServer server(&monitor);
1265 //CimserverHolder cimserverHolder( &server );
|
1266 konrad.r 1.163 _cimServer = new CIMServer(_monitor);
|
1267 mday 1.111
|
1268 kumpf 1.41
|
1269 kumpf 1.86 if (enableHttpConnection)
1270 {
|
1271 h.sterling 1.153 _cimServer->addAcceptor(false, portNumberHttp, false, false);
|
1272 humberto 1.97 //l10n
1273 //Logger::put(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1274 //"Listening on HTTP port $0.", portNumberHttp);
|
1275 david.dillard 1.165
|
1276 humberto 1.97 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1277 h.sterling 1.153 "src.Server.cimserver.LISTENING_ON_HTTP_PORT",
1278 "Listening on HTTP port $0.", portNumberHttp);
|
1279 kumpf 1.86 }
1280 if (enableHttpsConnection)
1281 {
|
1282 h.sterling 1.153 _cimServer->addAcceptor(false, portNumberHttps, true, false);
|
1283 humberto 1.97 //l10n
1284 //Logger::put(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1285 //"Listening on HTTPS port $0.", portNumberHttps);
1286 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1287 h.sterling 1.153 "src.Server.cimserver.LISTENING_ON_HTTPS_PORT",
1288 "Listening on HTTPS port $0.", portNumberHttps);
|
1289 kumpf 1.86 }
|
1290 kumpf 1.135 if (enableSSLExportClientVerification)
1291 {
|
1292 h.sterling 1.153 _cimServer->addAcceptor(false, portNumberExportHttps, true, true);
|
1293 kumpf 1.135
1294 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1295 "src.Server.cimserver.LISTENING_ON_EXPORT_HTTPS_PORT",
1296 "Listening on Export HTTPS port $0.", portNumberExportHttps);
1297 }
1298
|
1299 h.sterling 1.159 #ifndef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
|
1300 h.sterling 1.153 _cimServer->addAcceptor(true, 0, false, false);
|
1301 humberto 1.97 //l10n
1302 //Logger::put(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
1303 //"Listening on local connection socket.");
1304 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::INFORMATION,
|
1305 h.sterling 1.153 "src.Server.cimserver.LISTENING_ON_LOCAL",
1306 "Listening on local connection socket.");
|
1307 kumpf 1.41 #endif
|
1308 kumpf 1.86
|
1309 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1310 kumpf 1.86 if (enableHttpConnection)
1311 {
|
1312 humberto 1.97 //l10n
1313 //cout << "Listening on HTTP port " << portNumberHttp << endl;
|
1314 h.sterling 1.153 MessageLoaderParms parms("src.Server.cimserver.LISTENING_ON_HTTP_PORT",
1315 "Listening on HTTP port $0.", portNumberHttp);
1316 cout << MessageLoader::getMessage(parms) << endl;
|
1317 kumpf 1.86 }
1318 if (enableHttpsConnection)
1319 {
|
1320 humberto 1.97 //l10n
1321 //cout << "Listening on HTTPS port " << portNumberHttps << endl;
|
1322 humberto 1.103 MessageLoaderParms parms("src.Server.cimserver.LISTENING_ON_HTTPS_PORT",
|
1323 h.sterling 1.153 "Listening on HTTPS port $0.", portNumberHttps);
1324 cout << MessageLoader::getMessage(parms) << endl;
|
1325 kumpf 1.86 }
|
1326 kumpf 1.135 if (enableSSLExportClientVerification)
1327 {
1328 MessageLoaderParms parms("src.Server.cimserver.LISTENING_ON_EXPORT_HTTPS_PORT",
1329 "Listening on Export HTTPS port $0.", portNumberExportHttps);
1330
1331 cout << MessageLoader::getMessage(parms) << endl;
1332 }
1333
|
1334 h.sterling 1.159 # ifndef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
|
1335 humberto 1.97 //l10n
1336 //cout << "Listening on local connection socket" << endl;
1337 MessageLoaderParms parms("src.Server.cimserver.LISTENING_ON_LOCAL",
|
1338 h.sterling 1.153 "Listening on local connection socket.");
|
1339 humberto 1.97 cout << MessageLoader::getMessage(parms) << endl;
|
1340 kumpf 1.86 # endif
|
1341 david 1.85 #endif
|
1342 mike 1.35
|
1343 kumpf 1.86 // bind throws an exception if the bind fails
|
1344 david.dillard 1.165 try {
|
1345 konrad.r 1.163 _cimServer->bind();
1346 } catch (const BindFailedException &e)
1347 {
1348 #ifdef PEGASUS_DEBUG
1349 MessageLoaderParms parms("src.Server.cimserver.BIND_FAILED",
1350 "Could not bind: $0.", e.getMessage());
1351 cout << MessageLoader::getMessage(parms) << endl;
1352 #endif
1353 Logger::put_l(Logger::ERROR_LOG, System::CIMSERVER, Logger::SEVERE,
1354 "src.Server.cimserver.BIND.FAILED",
1355 "Could not bind: $0", e.getMessage());
|
1356 kumpf 1.73
|
1357 konrad.r 1.163 deleteCIMServer();
1358 return 1;
1359 }
|
1360 david.dillard 1.165 // notify parent process (if there is a parent process) to terminate
|
1361 konrad.r 1.95 // so user knows that there is cimserver ready to serve CIM requests.
|
1362 h.sterling 1.153 if (daemonOption)
1363 _cimServerProcess->notify_parent(0);
|
1364 mike 1.32
|
1365 h.sterling 1.153 time_t last = 0;
|
1366 mike 1.35
|
1367 gs.keenan 1.150 #if defined(PEGASUS_OS_HPUX) || defined(PEGASUS_OS_LINUX) || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM) \
|
1368 jim.wunderlich 1.169 || defined(PEGASUS_OS_AIX) || defined(PEGASUS_OS_SOLARIS) \
|
1369 gs.keenan 1.150 || defined(PEGASUS_OS_VMS)
|
1370 kumpf 1.45 //
|
1371 kumpf 1.56 // create a file to indicate that the cimserver has started and
1372 // save the process id of the cimserver process in the file
|
1373 kumpf 1.45 //
|
1374 kumpf 1.56 // remove the old file if it exists
|
1375 h.sterling 1.153 System::removeFile(_cimServerProcess->getPIDFileName());
|
1376 kumpf 1.56
1377 // open the file
|
1378 h.sterling 1.153 FILE *pid_file = fopen(_cimServerProcess->getPIDFileName(), "w");
|
1379 kumpf 1.91
|
1380 kumpf 1.56 if (pid_file)
|
1381 kumpf 1.45 {
|
1382 kumpf 1.56 // save the pid in the file
|
1383 h.sterling 1.153 fprintf(pid_file, "%ld\n", _cimServerProcess->get_server_pid());
|
1384 kumpf 1.56 fclose(pid_file);
|
1385 kumpf 1.45 }
1386 #endif
|
1387 kumpf 1.91
|
1388 kumpf 1.139 #if defined(PEGASUS_DEBUG)
|
1389 h.sterling 1.153 cout << "Started. " << endl;
|
1390 kumpf 1.63 #endif
|
1391 david.dillard 1.165
|
1392 kumpf 1.54 // Put server started message to the logger
|
1393 kumpf 1.143 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
1394 Logger::INFORMATION,
1395 "src.Server.cimserver.STARTED_VERSION",
1396 "Started $0 version $1.",
|
1397 h.sterling 1.153 _cimServerProcess->getProductName(), _cimServerProcess->getVersion());
|
1398 kumpf 1.45
|
1399 mike 1.35 //
1400 // Loop to call CIMServer's runForever() method until CIMServer
1401 // has been shutdown
1402 //
|
1403 h.sterling 1.153 while( !_cimServer->terminated() )
1404 {
|
1405 mday 1.116
|
1406 h.sterling 1.153 _cimServer->runForever();
|
1407 mday 1.112
|
1408 h.sterling 1.153 }
|
1409 carson.hovey 1.157
|
1410 kumpf 1.45 //
1411 // normal termination
|
1412 carson.hovey 1.157 //
|
1413 kumpf 1.143
|
1414 kumpf 1.54 // Put server shutdown message to the logger
|
1415 kumpf 1.143 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER,
1416 Logger::INFORMATION, "src.Server.cimserver.STOPPED",
|
1417 h.sterling 1.153 "$0 stopped.", _cimServerProcess->getProductName());
|
1418 kumpf 1.45
|
1419 carolann.graves 1.171 #if defined(PEGASUS_OS_HPUX) || defined(PEGASUS_OS_LINUX) \
|
1420 gs.keenan 1.150 || defined(PEGASUS_PLATFORM_ZOS_ZSERIES_IBM) || defined(PEGASUS_OS_AIX) \
|
1421 jim.wunderlich 1.169 || defined(PEGASUS_OS_SOLARIS) || defined(PEGASUS_OS_VMS)
|
1422 kumpf 1.45 //
|
1423 carolann.graves 1.171 // Note: do not remove the PID file created at startup time, since
1424 // shutdown is not complete until the CIMServer destructor completes.
|
1425 kumpf 1.45 //
1426 #endif
|
1427 mike 1.32 }
1428 catch(Exception& e)
1429 {
|
1430 david 1.100
|
1431 h.sterling 1.153 //l10n
1432 //Logger::put(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
|
1433 david.dillard 1.165 //"Error: $0", e.getMessage());
|
1434 h.sterling 1.153 Logger::put_l(Logger::STANDARD_LOG, System::CIMSERVER, Logger::WARNING,
1435 "src.Server.cimserver.ERROR",
|
1436 david.dillard 1.165 "Error: $0", e.getMessage());
|
1437 konrad.r 1.95
1438 #ifndef PEGASUS_OS_OS400
|
1439 h.sterling 1.153 //l10n
1440 //PEGASUS_STD(cerr) << "Error: " << e.getMessage() << PEGASUS_STD(endl);
1441 MessageLoaderParms parms("src.Server.cimserver.ERROR",
1442 "Error: $0", e.getMessage());
1443 PEGASUS_STD(cerr) << MessageLoader::getMessage(parms) << PEGASUS_STD(endl);
|
1444 david 1.100
|
1445 david 1.85 #endif
|
1446 kumpf 1.77
|
1447 h.sterling 1.153 //
|
1448 kumpf 1.77 // notify parent process (if there is a parent process) to terminate
1449 //
1450 if (daemonOption)
|
1451 h.sterling 1.153 _cimServerProcess->notify_parent(1);
|
1452 kumpf 1.77
|
1453 h.sterling 1.156 deleteCIMServer();
|
1454 kumpf 1.54 return 1;
|
1455 mike 1.32 }
1456
|
1457 h.sterling 1.156 deleteCIMServer();
|
1458 mike 1.32 return 0;
1459 }
|
1460 tony 1.128
1461
1462
1463
|