Return to cimconfig.8 CVS log | Up to [Pegasus] / pegasus / rpm / manLinux / man8.Z |
File: [Pegasus] / pegasus / rpm / manLinux / man8.Z / cimconfig.8
(download)
Revision: 1.7.6.1, Tue Jul 1 14:17:32 2008 UTC (16 years ago) by mike Branch: TASK-PEP328_SOLARIS_IX86_CC_PORT-branch-v2 CVS Tags: TASK_PEP328_SOLARIS_NEVADA_PORT, TASK-PEP328_SOLARIS_NEVADA_PORT-root, TASK-PEP328_SOLARIS_NEVADA_PORT-branch Changes since 1.7: +18 -1 lines PEP#: 328 TITLE: Solaris Porting DESCRIPTION: Ongoing Solaris Porting |
.\" $Header: /cvs/MSB/pegasus/rpm/manLinux/man8.Z/cimconfig.8,v 1.7.6.1 2008/07/01 15:17:32 mike Exp $ .\" .TA c \" lowercase initial leter of .TH name .TH "cimconfig" "8" "" "" "" .SH "NAME" cimconfig \- get, set, unset, or list CIM Server configuration properties .SH "SYNOPSIS" \fBcimconfig\fP \fB\-g\fP name [ \fB\-c\fP ] [ \fB\-d\fP ] [ \fB\-p\fP ] \fBcimconfig\fP \fB\-s\fP name=value [ \fB\-c\fP ] [ \fB\-p\fP ] \fBcimconfig\fP \fB\-u\fP name [ \fB\-c\fP ] [ \fB\-p\fP ] \fBcimconfig\fP \fB\-l\fP [ \fB\-c\fP | \fB\-p\fP ] \fBcimconfig\fP \fB\-h\fP \fBcimconfig\fP \fB\-\-help\fP \fBcimconfig\fP \fB\-\-version\fP .SH "DESCRIPTION" .PP The .B cimconfig command manages CIM Server configuration properties. The operations are executed on the local host by submitting requests to the CIM Server. An operation on a current configuration property takes effect immediately, and an operation on a planned configuration property takes effect the next time the CIM Server is started with .B "cimserver (8)" . Modifications to a configuration property via .B cimconfig remain in effect until changed via another .B cimconfig command. Configuration properties may also be modified temporarily via the .B "cimserver (8)" command, in which case, the modification of the configuration property remains in effect for that execution of the .B "cimserver (8)" command only. A default value is associated with each configuration property. Each configuration property is initially assigned its default value, until modified by a .B cimconfig command or .B "cimserver (8)" command. Dynamic configuration properties are those whose current values may be set while the CIM server is running. .PP The following configuration properties are available: .PP .B authorizedUserGroups .IP .BR Description: " If set, the value is interpreted as a list of comma-separated user groups whose members may issue CIM requests. A user who is not a member of any of these groups is restricted from issuing CIM requests, with the exception of privileged users (superuser). If unset, any user may issue CIM requests. Note: This configuration property operates in conjunction with other CIM request authorization conditions rather than overriding them. .PD 0 .IP .BR "Default Value: " (None) .IP .BR Dynamic: \0No .PD .PP .B enableAssociationTraversal .IP .BR Description: " If True, the CIM Server will support the four association traversal operators: Associators, AssociatorNames, References, and ReferenceNames. .PD 0 .IP .BR "Default Value: " True .IP .BR Dynamic: \0No .PD .PP .B enableAuditLog .IP .BR Description: " If True, audit log entries for certain types of CIM Server activities will be written to the system log. Examples of audited activities include a CIM Server configuration change, a Provider registration change, an authentication attempt and a modification to the CIM Schema or a CIM Instance. An audit log entry describes the who, what, and when associated with an audited activity. .PD 0 .IP .BR "Default Value: " False .IP .BR Dynamic: \0Yes .PD .PP .B enableIndicationService .IP .BR Description: " If True, the CIM Server will support CIM Indications." .PD 0 .IP .BR "Default Value: " True .IP .BR Dynamic: \0No .PD .PP .B enableHttpConnection .IP .BR Description: " If True, allows connections to the CIM Server using the HTTP protocol .PD 0 .IP .BR "Default Value: " False .IP .BR Dynamic: \0No .PD .PP .B enableHttpsConnection .IP .BR Description: " If True, allows connections to the CIM Server using the HTTPS protocol (HTTP using Secure Socket Layer encryption) .PD 0 .IP .BR "Default Value: " True .IP .BR Dynamic: \0No .PD .PP .B enableNamespaceAuthorization .IP .BR Description: " If True, the CIM Server restricts access to namespaces based on configured user authorizations [user authorizations may be configured using .B "cimauth (8)" ] .PD 0 .IP .BR "Default Value: " False .IP .BR Dynamic: \0No .PD .PP .B enableRemotePrivilegedUserAccess .IP .BR Description: " If True, the CIM Server allows access by a privileged user from a remote system .PD 0 .IP .BR "Default Value: " True .IP .BR Dynamic: \0No .PD .PP .B enableSubscriptionsForNonprivilegedUsers .IP .BR Description: " If True, nonprivileged user of the system will be allowed to create Indication Subscription, otherwise privileged access is required. .PD 0 .IP .BR "Default Value: " False .IP .BR Dynamic: \0No .PD .PP .B forceProviderProcesses .IP .BR Description: " If true, the CIM Server runs Providers in separate processes rather than loading and calling Provider libraries directly within the CIM Server process. .PD 0 .IP .BR "Default Value: " True .IP .BR Dynamic: \0No .PD .PP .B idleConnectionTimeout .IP .BR Description: " If set to a positive integer, this value specifies a minimum timeout value for idle client connections. If set to zero, idle client connections do not time out. .BR A client connection is considered idle when it is not in the process of sending a request and the CIM Server is not processing a request from that connection. An idle connection timeout allows reclamation of the system resources allocated for idle CIM Server connections. Note that the CIM Server may allow an idle connection to persist longer than the configured timeout value based on server activity. .BR Some client applications may not behave correctly if a connection timeout is introduced. Client compatibility should be considered when configuring an idle connection timeout value. .BR The idle connection time is computed using the system clock. Thus, resetting the system clock may cause unexpected timeout behavior. .PD 0 .IP .BR "Default Value: " 0 .IP .BR Dynamic: \0No .PD .PP .B shutdownTimeout .IP .BR Description: " When a .B cimserver \-s shutdown command is issued, specifies the maximum time in seconds for the CIM Server to complete outstanding CIM operation requests before shutting down; if the specified timeout period expires, the CIM Server will shut down, even if there are still CIM operations in progress. Minimum value is 2 seconds. .PD 0 .IP .BR "Default Value: " 30 .IP .BR Dynamic: \0Yes .PD .PP .B socketWriteTimeout .IP .BR Description: " Specifies the number of seconds the CIM Server will wait for a client connection to be ready to receive data. If the CIM Server is unable to write to a connection in this time, the connection is closed. .BR A client connection can become unable to receive data if the client fails to read the data that has already been sent. This timeout allows the CIM Server to reclaim resources that are allocated to a malfunctioning client. .BR One might consider increasing this timeout value if the CIM Server prematurely closes connections with well-behaved clients. .PD 0 .IP .BR "Default Value: " 20 .IP .BR Dynamic: \0Yes .PD .PP .B sslClientVerificationMode .IP .BR Description: " Defines the desired level of support for certificate-based authentication. It can be set to .B required, optional or .B disabled. If set to .B required, the CIM Server will require all clients connecting over HTTPS to authenticate using a certificate. If the client certificate is not sent or not trusted the connection will be rejected. If set to .B optional, the CIM Server will allow, but not require, HTTPS clients to authenticate using a certificate. If the client does not send a certificate, the CIM Server will attempt to authenticate the client using HTTP basic authentication. If set to .B disabled, the CIM Server will not allow HTTPS clients to authenticate using a certificate. Basic authentication will be used to authenticate all HTTPS clients. This property is only used if .B enableHttpsConnection is true. .PD 0 .IP .BR "Default Value: " disabled .IP .BR Dynamic: \0No .PD .PP If both the .B enableHttpsConnection and .B enableHttpConnection properties are set to .B False , neither HTTP nor HTTPS connections will be allowed. On some platforms, the OpenPegasus CIM Server has been enhanced to include support for a local (single system), non-standard protocol. This allows the OpenPegasus CIM Server to continue to receive and process requests from local OpenPegasus CIM Clients even if both HTTP ports are disabled. If a local protocol is not supported, the CIM Server will be shut down and disabled from automatically being re\-started. .PP The current and planned values of the configuration properties are stored in the files .B /var/opt/tog\-pegasus/cimserver_current.conf and .B /var/opt/tog\-pegasus/cimserver_planned.conf , respectively. The configuration properties may only be modified via the .B cimconfig and .B "cimserver (8)" commands; the files must not be edited directly. .SS Options .PP The .B cimconfig command recognizes the following options: .RS .TP 15 \fB\-g\fP configuration_property Gets the specified value (current, planned and/or default) of the specified configuration property. By default, gets the current value. .TP \fB\-s\fP configuration_property = value Sets the specified value (current and/or planned) of the specified configuration property to .I R value . By default, sets the current value. .TP \fB\-u\fP configuration_property Unsets the specified value (current and/or planned) of the specified configuration property, and resets it to its default value. By default, unsets the current value and resets it to its default value. .TP .B \-l Lists all the specified (current or planned) configuration property name and value pairs in the CIM Server. By default, lists only the names of all the current configuration properties. .TP .B \-c Specifies that the operation (get, set, unset, or list) be performed on the current configuration properties. For set or unset operations, returns an error when the CIM Server is not running or the specified property is not a dynamic property. .TP .B \-p Specifies that the operation (get, set, unset, or list) be performed on the planned configuration properties. For set and unset operations, operates on the value of the specified property in the planned configuration file if the CIM Server is not running. .TP .B \-d Specifies that the get operation be performed on the default configuration properties. Returns an error when the CIM Server is not running. .RE .PP If no options are specified, .B cimconfig displays a usage message. .SH "EXIT STATUS" .PP When an error occurs, an error message is written to stderr and an error value of 1 is returned. The following return values are returned: .RS .TP .B 0 Successful completion .PD 0 .TP .B 1 Error .PD .RE .SH "EXAMPLES" .PP Get the current value for the configuration property .B shutdownTimeout . .IP .B cimconfig \-g shutdownTimeout \-c .PP Get the planned value for the configuration property .B shutdownTimeout . .IP .B cimconfig \-g shutdownTimeout \-p .PP Get the default value for the configuration property .B shutdownTimeout . .IP .B cimconfig \-g shutdownTimeout \-d .PP Set the current value of the property .B shutdownTimeout to the new value 15. .IP .B cimconfig \-s shutdownTimeout=15 \-c .PP Set the planned value of the property .B shutdownTimeout , to the new value 5. .IP .B cimconfig \-s shutdownTimeout=5 \-p .PP Reset the current value of the property .B shutdownTimeout to its default value. .IP .B cimconfig \-u shutdownTimeout \-c .PP Reset the planned value of the property .B shutdownTimeout to its default value. .IP .B cimconfig \-u shutdownTimeout \-p .PP List all the current configuration property names. .IP .B cimconfig \-l .PP List all the current configuration property names and their values. .IP .B cimconfig \-l \-c .PP List all the planned configuration property names and their values. .IP .B cimconfig \-l \-p .SH "FILES" .TP 30 .PD 0 .B /var/opt/tog\-pegasus/cimserver_current.conf Current configuration .TP .B /var/opt/tog\-pegasus/cimserver_planned.conf Planned configuration .PD .SH "SEE ALSO" .PP cimserver (8), cimauth (8).
No CVS admin address has been configured |
Powered by ViewCVS 0.9.2 |