1 a.dunfey 1.113.2.2 #//%2006////////////////////////////////////////////////////////////////////////
|
2 martin 1.92 #//
3 #// Copyright (c) 2000, 2001, 2002 BMC Software; Hewlett-Packard Development
4 #// Company, L.P.; IBM Corp.; The Open Group; Tivoli Systems.
5 #// Copyright (c) 2003 BMC Software; Hewlett-Packard Development Company, L.P.;
6 #// IBM Corp.; EMC Corporation, The Open Group.
7 #// Copyright (c) 2004 BMC Software; Hewlett-Packard Development Company, L.P.;
8 #// IBM Corp.; EMC Corporation; VERITAS Software Corporation; The Open Group.
9 #// Copyright (c) 2005 Hewlett-Packard Development Company, L.P.; IBM Corp.;
10 #// EMC Corporation; VERITAS Software Corporation; The Open Group.
|
11 a.dunfey 1.113.2.2 #// Copyright (c) 2006 Hewlett-Packard Development Company, L.P.; IBM Corp.;
12 #// EMC Corporation; Symantec Corporation; The Open Group.
|
13 martin 1.92 #//
14 #// Permission is hereby granted, free of charge, to any person obtaining a copy
15 #// of this software and associated documentation files (the "Software"), to
16 #// deal in the Software without restriction, including without limitation the
17 #// rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
18 #// sell copies of the Software, and to permit persons to whom the Software is
19 #// furnished to do so, subject to the following conditions:
20 #//
21 #// THE ABOVE COPYRIGHT NOTICE AND THIS PERMISSION NOTICE SHALL BE INCLUDED IN
22 #// ALL COPIES OR SUBSTANTIAL PORTIONS OF THE SOFTWARE. THE SOFTWARE IS PROVIDED
23 #// "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
24 #// LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
25 #// PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
26 #// HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
27 #// ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
28 #// WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 #//
30 #//==============================================================================
|
31 mike 1.1 ################################################################################
32 ##
33 ## Get external environment variables. Note that all external environment
34 ## variables begin with "PEGASUS_".
35 ##
36 ################################################################################
37
|
38 konrad.r 1.55 ifndef ROOT
39 ROOT = $(subst \,/,$(PEGASUS_ROOT))
40 endif
41
|
42 denise.eckstein 1.61 ifdef PEGASUS_ENVVAR_FILE
|
43 david.dillard 1.65 include $(PEGASUS_ENVVAR_FILE)
|
44 denise.eckstein 1.61 else
|
45 david.dillard 1.65 include $(ROOT)/env_var.status
|
46 denise.eckstein 1.61 endif
|
47 konrad.r 1.55
|
48 mike 1.2 ifdef PEGASUS_HOME
|
49 david.dillard 1.65 HOME_DIR = $(subst \,/,$(PEGASUS_HOME))
|
50 mike 1.1 else
|
51 david.dillard 1.65 $(error PEGASUS_HOME environment variable undefined)
|
52 mike 1.1 endif
53
|
54 karl 1.18 ifdef PEGASUS_ROOT
55 ROOT = $(subst \,/,$(PEGASUS_ROOT))
56 else
|
57 david.dillard 1.65 $(error PEGASUS_ROOT environment variable undefined)
|
58 karl 1.18 endif
59
|
60 chuck 1.35 # l10n
61 ifdef ICU_ROOT
62 ICUROOT = $(subst \,/,$(ICU_ROOT))
63 endif
64
|
65 kumpf 1.21 ifdef PEGASUS_TMP
|
66 david.dillard 1.65 TMP_DIR = $(subst \,/,$(PEGASUS_TMP))
|
67 kumpf 1.21 else
|
68 david.dillard 1.65 TMP_DIR = .
|
69 kumpf 1.21 endif
70
|
71 kumpf 1.26 ifdef PEGASUS_DISPLAYCONSUMER_DIR
|
72 david.dillard 1.65 DISPLAYCONSUMER_DIR = $(subst \,/,$(PEGASUS_DISPLAYCONSUMER_DIR))
|
73 kumpf 1.26 else
|
74 david.dillard 1.65 DISPLAYCONSUMER_DIR = $(subst \,/,$(PEGASUS_HOME))
|
75 kumpf 1.26 endif
76
|
77 aruran.ms 1.102 ifdef PEGASUS_DEBUG
78 PEGASUS_USE_DEBUG_BUILD_OPTIONS = 1
79 endif
80
|
81 david.dillard 1.66 PLATFORM_FILES=$(wildcard $(ROOT)/mak/platform*.mak)
|
82 karl 1.78 PLATFORM_TEMP=$(subst $(ROOT)/mak/platform_,, $(PLATFORM_FILES))
|
83 jim.wunderlich 1.104 VALID_PLATFORMS=$(subst .mak, , $(PLATFORM_TEMP))
|
84 mike 1.8
85 ifndef PEGASUS_PLATFORM
|
86 david.dillard 1.66 $(error PEGASUS_PLATFORM environment variable undefined. Please set to\
87 one of the following:$(VALID_PLATFORMS))
|
88 mike 1.8 endif
89
|
90 mike 1.1 ################################################################################
|
91 a.dunfey 1.113.2.2 ifeq ($(findstring _GNU, $(PEGASUS_PLATFORM)), _GNU)
92 ifdef CXX
93 GCC_VERSION = $(shell $(CXX) -dumpversion)
94 else
95 GCC_VERSION = $(shell g++ -dumpversion)
96 endif
97 else
98 GCC_VERSION =
99 endif
|
100 mike 1.1
|
101 kumpf 1.22 OBJ_DIR = $(HOME_DIR)/obj/$(DIR)
102 BIN_DIR = $(HOME_DIR)/bin
103 LIB_DIR = $(HOME_DIR)/lib
|
104 chuck 1.35
105 # l10n
106 # define the location for the compiled messages
107 MSG_ROOT = $(HOME_DIR)/msg
|
108 kumpf 1.22
|
109 jim.wunderlich 1.90 #############################################################################
110 ## The following REPOSITORY_XXX variables are only used within the
111 ## makefiles for building the repository (cimmofl) and running the tests.
112 ## They have no effect on CIMconfig initial startup configuration.
113
114 #
|
115 kumpf 1.22 # define the location for the repository
|
116 jim.wunderlich 1.90 #
117 # NOTE: There is another variable efined in many of the test makefiles
118 # called REPOSITORYDIR. It is a local variable in each of those Makefiles
119 # to localally control where the temporay small repository they
120 # build, use and then delete is located. Most of the time it is set to TMP_DIR.
121 #
|
122 jim.wunderlich 1.91
|
123 kumpf 1.22 REPOSITORY_DIR = $(HOME_DIR)
|
124 jim.wunderlich 1.90
125 #
126 # WARNING: The REPOSITORY_NAME varible is not used by all the test,
127 # many of them are still hardcoded to "repository". What this means
128 # is that you can change the repository name and build it. But you
129 # cannot run the test without many of them failing
130 #
|
131 jim.wunderlich 1.91
|
132 jim.wunderlich 1.81 REPOSITORY_NAME = repository
|
133 jim.wunderlich 1.91
|
134 jim.wunderlich 1.90
|
135 jim.wunderlich 1.81 REPOSITORY_ROOT = $(REPOSITORY_DIR)/$(REPOSITORY_NAME)
136
137 # define the repository mode
|
138 h.sterling 1.89 # XML = XML format
139 # BIN = Binary format
|
140 jim.wunderlich 1.81 #
|
141 jim.wunderlich 1.91 ifndef PEGASUS_REPOSITORY_MODE
142 ## set to default value
143 REPOSITORY_MODE = XML
144 else
145 ## validate assigned value
146 ifeq ($(PEGASUS_REPOSITORY_MODE),XML)
147 REPOSITORY_MODE = XML
148 else
149 ifeq ($(PEGASUS_REPOSITORY_MODE),BIN)
150 REPOSITORY_MODE = BIN
151 else
152 $(error PEGASUS_REPOSITORY_MODE ($(PEGASUS_REPOSITORY_MODE)) \
153 is invalid. It must be set to either XML or BIN)
154 endif
155 endif
|
156 jim.wunderlich 1.90 endif
157
|
158 jim.wunderlich 1.91
|
159 jim.wunderlich 1.90 ###########################################################################
|
160 mike 1.1
|
161 kumpf 1.23 # The two variables, CIM_SCHEMA_DIR and CIM_SCHEMA_VER,
|
162 chip 1.76 # are used to control the version of the CIM Schema
|
163 kumpf 1.23 # loaded into the Pegasus Internal, InterOp,
164 # root/cimv2 and various test namespaces.
165 #
|
166 chip 1.76 # Update the following two environment variables to
|
167 kumpf 1.23 # change the version.
168
|
169 kumpf 1.37 # The environment variable PEGASUS_CIM_SCHEMA can be used
|
170 chip 1.76 # to change the values of CIM_SCHEMA_DIR, CIM_SCHEMA_VER
|
171 kumpf 1.37 # and ALLOW_EXPERIMENTAL.
172 #
173 # To use the PEGASUS_CIM_SCHEMA variable the Schema mof
174 # files must be placed in the directory
|
175 a.dunfey 1.113.2.2 # $(PEGASUS_ROOT)/Schemas/$(PEGASUS_CIM_SCHEMA)
|
176 chip 1.76 #
|
177 kumpf 1.37 # The value of PEGASUS_CIM_SCHEMA must conform to the
178 # following syntax:
179 #
180 # CIM[Prelim]<CIM_SCHEMA_VER>
181 #
|
182 chip 1.76 # The string "Prelim" should be included if the
|
183 kumpf 1.37 # Schema contains "Experimental" class definitions.
184 #
185 # The value of <CIM_SCHEMA_VER> must be the value
|
186 chip 1.76 # of the version string included by the DMTF as
187 # part of the mof file names (e.g, CIM_Core27.mof).
|
188 kumpf 1.37 # Therefore, for example, the value of <CIM_SCHEMA_VER>
189 # for CIM27 Schema directories MUST be 27.
190 #
|
191 chip 1.76 # Examples of valid values of PEGASUS_CIM_SCHEMA
|
192 kumpf 1.37 # include CIMPrelim27, CIM27, CIMPrelim28, and CIM28.
193 #
194 # Note the CIMPrelim271 would NOT be a valid value
195 # for PEGASUS_CIM_SCHEMA because the version string
196 # portion of the mof files (e.g., CIM_Core27.mof) in
197 # the CIMPrelimin271 directory is 27 not 271.
|
198 kumpf 1.23
|
199 gerarda 1.29 # ***** CIM_SCHEMA_DIR INFO ****
200 # If CIM_SCHEMA_DIR changes to use a preliminary schema which
201 # has experimentals make sure and change the path below to appopriate
202 # directory path. Example: CIMPrelim271 is preliminary and has
203 # experimental classes. Since experimental classes exist the -aE
204 # option of the mof compiler needs to be set.
205 # *****
|
206 kumpf 1.37
207 ifdef PEGASUS_CIM_SCHEMA
|
208 david.dillard 1.65 CIM_SCHEMA_DIR=$(PEGASUS_ROOT)/Schemas/$(PEGASUS_CIM_SCHEMA)
|
209 chip 1.76 ifeq ($(findstring $(patsubst CIM%,%,$(patsubst CIMPrelim%,%,$(PEGASUS_CIM_SCHEMA))),1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 271 28),)
|
210 david.dillard 1.65 CIM_SCHEMA_VER=
211 else
212 CIM_SCHEMA_VER=$(patsubst CIM%,%,$(patsubst CIMPrelim%,%,$(PEGASUS_CIM_SCHEMA)))
213 endif
|
214 kumpf 1.37 else
|
215 a.dunfey 1.82 CIM_SCHEMA_DIR=$(PEGASUS_ROOT)/Schemas/CIM29
216 CIM_SCHEMA_VER=
|
217 kumpf 1.37 endif
218
219 ifneq (, $(findstring Prelim, $(CIM_SCHEMA_DIR)))
|
220 david.dillard 1.65 ALLOW_EXPERIMENTAL = -aE
|
221 gerarda 1.29 else
|
222 david.dillard 1.65 ALLOW_EXPERIMENTAL =
|
223 gerarda 1.29 endif
224
|
225 bob 1.5 LEX = flex
226
|
227 jim.wunderlich 1.94 ## ======================================================================
228 ##
229 ## PEGASUS_ENABLE_SORTED_DIFF
230 ## This controls if the DIFFSORT function is used rather than a simple DIFF of
231 ## of the test results files to the static results file.
232 ##
233 ## Set to "true" enables the sorted diffs of results to static results files.
234 ## otherwise results in regular diffs of results to static results files.
235 ## see bug 2283 for background information concerning this config variable.
236 ##
237 ## Defaults to true.
238 ##
239 ##
240 ifndef PEGASUS_ENABLE_SORTED_DIFF
241 PEGASUS_ENABLE_SORTED_DIFF=true
242 endif
243
|
244 jim.wunderlich 1.86 ## ========================================================================
245 ## DIFFSORT function definition
246 ## Here is an example using the DIFFSORT function:
247 ##
248 ## difftest: FORCE
|
249 h.sterling 1.89 ## @ test > result
|
250 jim.wunderlich 1.86 ## @ $(call DIFFSORT,result,standard_result)
|
251 h.sterling 1.89 ## @ $(ECHO) +++++ all test passed
|
252 jim.wunderlich 1.86 ##
253
254 define NL
255
256
257 endef
258
|
259 marek 1.107 ifndef FORCE_NOCASE
260
|
261 jim.wunderlich 1.86 DIFFSORT = $(SORT) $(1) > $(1).tmp $(NL) \
262 $(SORT) $(2) > $(2).tmp $(NL) \
263 $(DIFF) $(1).tmp $(2).tmp $(NL) \
264 $(RM) -f $(1).tmp $(NL) \
265 $(RM) -f $(2).tmp $(NL)
266
|
267 marek 1.107 else
268
269 DIFFSORT = $(SORT) -f $(1) > $(1).tmp $(NL) \
270 $(SORT) -f $(2) > $(2).tmp $(NL) \
271 $(DIFF) -i $(1).tmp $(2).tmp $(NL) \
272 $(RM) -f $(1).tmp $(NL) \
273 $(RM) -f $(2).tmp $(NL)
274
275 endif
276
277 DIFFSORTNOCASE = $(SORT) $(1) > $(1).tmp $(NL) \
278 $(SORT) $(2) > $(2).tmp $(NL) \
279 $(DIFF) -i $(1).tmp $(2).tmp $(NL) \
280 $(RM) -f $(1).tmp $(NL) \
281 $(RM) -f $(2).tmp $(NL)
282
|
283 jim.wunderlich 1.104 #
284 # The following is used to define the usage message for MakeFile
285 #
286 # See the pegasus/Makfile for an exampleof its usage.
287 #
288 USAGE = @$(ECHO) " $(1)"
289
|
290 mike 1.8 ################################################################################
291 ##
292 ## Attempt to include a platform configuration file:
293 ##
294 ################################################################################
295
|
296 david.dillard 1.66 PLATFORM_FILE = $(ROOT)/mak/platform_$(PEGASUS_PLATFORM).mak
297 ifneq ($(wildcard $(PLATFORM_FILE)), )
298 include $(PLATFORM_FILE)
299 else
|
300 david.dillard 1.65 $(error PEGASUS_PLATFORM environment variable must be set to one of\
|
301 david.dillard 1.66 the following:$(VALID_PLATFORMS))
|
302 mike 1.8 endif
|
303 karl 1.17
|
304 karl 1.36 ################################################################################
305 ##
306 ## Set up any platform independent compile conditionals by adding them to
307 ## precreated FLAGS parameter.
|
308 chip 1.76 ## Assumes that the basic flags have been setup in FLAGS.
|
309 karl 1.36 ## Assumes that compile time flags are controlled with -D CLI option.
310 ##
311 ################################################################################
|
312 karl 1.17
|
313 jim.wunderlich 1.97
314 ################################################################################
315 ##
316 ## PEGASUS_MAX_THREADS_PER_SVC_QUEUE
317 ##
318 ## Controls the maximum number of threads allowed per message service queue.
319 ## It is allowed to range between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT
|
320 kumpf 1.103 ## as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp. If the
321 ## specified value is out of range, MAX_THREADS_PER_SVC_QUEUE_LIMIT is
322 ## used. The default value is MAX_THREADS_PER_SVC_QUEUE_DEFAULT, as
323 ## defined in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
|
324 jim.wunderlich 1.98 ##
325 ## Label Current value
326 ## -------------------------------------- -------------
327 ## MAX_THREADS_PER_SVC_QUEUE_LIMIT 5000
328 ## MAX_THREADS_PER_SVC_QUEUE_DEFAULT 5
|
329 jim.wunderlich 1.97 ##
330 ##
331
332 ifdef PEGASUS_MAX_THREADS_PER_SVC_QUEUE
333 DEFINES += -DMAX_THREADS_PER_SVC_QUEUE=$(PEGASUS_MAX_THREADS_PER_SVC_QUEUE)
334 endif
335
|
336 jim.wunderlich 1.99 ##############################################################################
337 ##
338 ## PEGASUS_INDICATIONS_Q_THRESHOLD
339 ##
340 ## Controls if indications providers are stalled if the indications
341 ## service queue is too large.
342 ##
|
343 jim.wunderlich 1.100 ## defaults to not set.
|
344 jim.wunderlich 1.99 ##
345 ## It can be set to any positive value.
346 ##
|
347 jim.wunderlich 1.100 ## If not set providers are never stalled. This implies that the
|
348 jim.wunderlich 1.99 ## indications service queue may become as large as neccesary to hold all
349 ## the indicaitons generated.
350 ##
|
351 jim.wunderlich 1.100 ## If set to any value then providers are stalled by forcing them to sleep
|
352 jim.wunderlich 1.99 ## when they try to deliver an indication and the indications service queue
353 ## exceeds this value. They are resumed when the queue count falls 10 percent
354 ## below this value.
355 ##
356 ## Stall and resume log entries are made to inform the administrator
357 ## the condition has occured.
358 ##
359 ## WARNING: This also affects the Out of Process Providers (OOP Providers)
360 ## The OOP Providers use two one way pipes for communication.
361 ## By stalling the Provider this prevents the pipe from being read
362 ## which will cause the pipe to fill up and the remote side will block.
363 ## OOP Prividers mix indications and operations on these two pipes.
364 ## This means the operations will also be blocked as a side effect of
365 ## the indications being stalled.
366 ##
367 ##
368
369 ifdef PEGASUS_INDICATIONS_Q_THRESHOLD
370 DEFINES += -DPEGASUS_INDICATIONS_Q_THRESHOLD=$(PEGASUS_INDICATIONS_Q_THRESHOLD)
371 endif
372
|
373 jim.wunderlich 1.97
|
374 karl 1.36 # Setup the conditional compile for client displays.
|
375 chip 1.76 #
|
376 karl 1.36 ifdef PEGASUS_CLIENT_TRACE_ENABLE
|
377 david.dillard 1.65 DEFINES += -DPEGASUS_CLIENT_TRACE_ENABLE
|
378 karl 1.36 endif
379
|
380 kumpf 1.87 # Allow PEGASUS_ASSERT statements to be disabled.
381 ifdef PEGASUS_NOASSERTS
382 DEFINES += -DNDEBUG
383 endif
384
|
385 mday 1.40 # do not compile trace code. sometimes it causes problems debugging
386 ifdef PEGASUS_REMOVE_TRACE
|
387 david.dillard 1.65 DEFINES += -DPEGASUS_REMOVE_TRACE
|
388 mday 1.40 endif
389
|
390 chuck 1.47 # PEP 161
391 # Control whether utf-8 filenames are supported by the repository
392 ifdef PEGASUS_SUPPORT_UTF8_FILENAME
|
393 david.dillard 1.65 DEFINES += -DPEGASUS_SUPPORT_UTF8_FILENAME
|
394 chuck 1.47
|
395 david.dillard 1.65 # Control whether utf-8 filenames in the repository are escaped
396 ifdef PEGASUS_REPOSITORY_ESCAPE_UTF8
397 DEFINES += -DPEGASUS_REPOSITORY_ESCAPE_UTF8
398 endif
|
399 chuck 1.47 endif
400
|
401 kumpf 1.49 #
402 # PEP 142
403 # The following flag need to be set to enable
404 # user group authorization functionality.
405 #
406 ifdef PEGASUS_ENABLE_USERGROUP_AUTHORIZATION
|
407 david.dillard 1.65 DEFINES += -DPEGASUS_ENABLE_USERGROUP_AUTHORIZATION
|
408 kumpf 1.49 endif
409
|
410 chuck 1.67 #
411 # PEP 193
412 # The following flag need to be set to disable
413 # CQL in indication subscriptions
414 #
415 ifdef PEGASUS_DISABLE_CQL
416 DEFINES += -DPEGASUS_DISABLE_CQL
417 endif
418
|
419 kumpf 1.68 #
420 # PEP 186
421 # Allow override of product name/version/status. A file
422 # pegasus/src/Pegasus/Common/ProductVersion.h must exist when this
423 # flag is defined.
424 #
425 ifdef PEGASUS_OVERRIDE_PRODUCT_ID
426 DEFINES += -DPEGASUS_OVERRIDE_PRODUCT_ID
427 endif
428
|
429 kumpf 1.71 #
|
430 kumpf 1.106 # PEP 72
431 # Allow Out-of-Process Providers to be disabled by default
432 #
|
433 jim.wunderlich 1.113 ifdef PEGASUS_DEFAULT_ENABLE_OOP
434 ifeq ($(PEGASUS_DEFAULT_ENABLE_OOP),true)
435 DEFINES += -DPEGASUS_DEFAULT_ENABLE_OOP
|
436 jim.wunderlich 1.111 else
|
437 jim.wunderlich 1.113 ifneq ($(PEGASUS_DEFAULT_ENABLE_OOP),false)
438 $(error PEGASUS_DEFAULT_ENABLE_OOP ($(PEGASUS_DEFAULT_ENABLE_OOP)) invalid, must be true or false)
|
439 jim.wunderlich 1.111 endif
440 endif
|
441 kumpf 1.106 endif
442
443 #
|
444 kumpf 1.71 # PEP 197
445 # Allow the Provider User Context feature to be disabled.
446 #
|
447 kumpf 1.74 ifdef PEGASUS_DISABLE_PROV_USERCTXT
|
448 kumpf 1.71 DEFINES += -DPEGASUS_DISABLE_PROV_USERCTXT
|
449 kumpf 1.74 else
450 ifdef PEGASUS_DISABLE_PROV_USERCTXT_REQUESTOR
451 DEFINES += -DPEGASUS_DISABLE_PROV_USERCTXT_REQUESTOR
452 endif
453 ifdef PEGASUS_DISABLE_PROV_USERCTXT_DESIGNATED
454 DEFINES += -DPEGASUS_DISABLE_PROV_USERCTXT_DESIGNATED
455 endif
456 ifdef PEGASUS_DISABLE_PROV_USERCTXT_PRIVILEGED
457 DEFINES += -DPEGASUS_DISABLE_PROV_USERCTXT_PRIVILEGED
458 endif
459 ifdef PEGASUS_DISABLE_PROV_USERCTXT_CIMSERVER
460 DEFINES += -DPEGASUS_DISABLE_PROV_USERCTXT_CIMSERVER
461 endif
462 endif
|
463 kumpf 1.71
|
464 h.sterling 1.89 # Bug 2147
465 # Allow local domain socket usage to be disabled.
466 ifdef PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
467 DEFINES += -DPEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET
468 endif
469
|
470 chip 1.76 # PEP 211
471 # Controls object normalization support.
472 ifdef PEGASUS_ENABLE_OBJECT_NORMALIZATION
473 DEFINES += -DPEGASUS_ENABLE_OBJECT_NORMALIZATION
474 endif
475
|
476 a.dunfey 1.113.2.1 # PEP 233
477 # Controls support for EmbeddedInstance properties
478 # and parameters
|
479 a.dunfey 1.113.2.4 ifdef PEGASUS_EMBEDDED_INSTANCE_SUPPORT
480 ifeq ($(PEGASUS_EMBEDDED_INSTANCE_SUPPORT), true)
481 DEFINES += -DPEGASUS_EMBEDDED_INSTANCE_SUPPORT
482 else
483 ifneq ($(PEGASUS_EMBEDDED_INSTANCE_SUPPORT), false)
484 $(error PEGASUS_EMBEDDED_INSTANCE_SUPPORT ($(PEGASUS_EMBEDDED_INSTANCE_SUPPORT)) invalid, must be true or false)
485 endif
486 endif
|
487 a.dunfey 1.113.2.1 endif
488
|
489 kumpf 1.80 # Allow ExecQuery functionality to be enabled
490 ifndef PEGASUS_ENABLE_EXECQUERY
491 DEFINES += -DPEGASUS_DISABLE_EXECQUERY
492 endif
493
|
494 yi.zhou 1.85 # Allow System Log Handler to be enabled
495 ifdef PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
496 DEFINES += -DPEGASUS_ENABLE_SYSTEM_LOG_HANDLER
497 endif
498
499 # Allow Email Handler to be enabled
500 ifdef PEGASUS_ENABLE_EMAIL_HANDLER
501 DEFINES += -DPEGASUS_ENABLE_EMAIL_HANDLER
502 endif
|
503 kumpf 1.49
|
504 h.sterling 1.109 # Allow qualifiers to be disabled for instance operations
505 ifdef PEGASUS_DISABLE_INSTANCE_QUALIFIERS
506 DEFINES += -DPEGASUS_DISABLE_INSTANCE_QUALIFIERS
507 endif
508
|
509 yi.zhou 1.108 # Controls snmp indication handler to use NET-SNMP to deliver trap
510 ifdef PEGASUS_USE_NET_SNMP
511 DEFINES += -DPEGASUS_USE_NET_SNMP
512 endif
513
|
514 a.dunfey 1.113.2.2 ifdef PEGASUS_HAS_SSL
515 ifndef OPENSSL_BIN
516 OPENSSL_BIN = $(OPENSSL_HOME)/bin
517 endif
|
518 a.dunfey 1.113.2.3 ifndef OPENSSL_COMMAND
519 OPENSSL_COMMAND = $(OPENSSL_BIN)/openssl
520 endif
|
521 a.dunfey 1.113.2.2 ifndef OPENSSL_SET_SERIAL_SUPPORTED
522 ifneq (, $(findstring 0.9.6, $(shell $(OPENSSL_COMMAND) version)))
523 OPENSSL_SET_SERIAL_SUPPORTED = false
524 else
525 OPENSSL_SET_SERIAL_SUPPORTED = true
526 endif
|
527 a.dunfey 1.113.2.3 endif
|
528 a.dunfey 1.113.2.2 endif
529
|
530 jim.wunderlich 1.101 #
531 # PEGASUS_ENABLE_SLP and PEGASUS_DISABLE_SLP
532 #
|
533 jim.wunderlich 1.112 # PEGASUS_DISABLE_SLP has been depracated. New use model is:
|
534 jim.wunderlich 1.101 #
|
535 jim.wunderlich 1.112 # Use PEGASUS_ENABLE_SLP=true to enable compilation of SLP functions.
536 #
537 # Use PEGASUS_ENABLE_SLP=false to disable compilation of SLP functions.
|
538 jim.wunderlich 1.101 #
539 # Currently (Aug. 12, 2005) Windows is the only platform that enables SLP
540 # by default.
541 #
542 # NOTE. Effective with Bug # 2633 some platforms enable SLP.
|
543 karl 1.75 # To see which platforms look for platform make files that set
|
544 jim.wunderlich 1.101 # the variable PEGASUS_ENABLE_SLP.
545 #
546 #
|
547 jim.wunderlich 1.112
|
548 karl 1.39 ifdef PEGASUS_ENABLE_SLP
|
549 jim.wunderlich 1.101 ifdef PEGASUS_DISABLE_SLP
550 $(error Conflicting defines PEGASUS_ENABLE_SLP and PEGASUS_DISABLE_SLP both set)
551 endif
|
552 jim.wunderlich 1.112 endif
553
554 ifdef PEGASUS_DISABLE_SLP
555 $(error PEGASUS_DISABLE_SLP has been deprecated. Please use PEGASUS_ENABLE_SLP=[true/false] )
556
557 PEGASUS_ENABLE_SLP=false
558
559 endif
560
561 ifdef PEGASUS_ENABLE_SLP
562 ifeq ($(PEGASUS_ENABLE_SLP),true)
|
563 david.dillard 1.65 DEFINES += -DPEGASUS_ENABLE_SLP
|
564 jim.wunderlich 1.112 else
565 ifneq ($(PEGASUS_ENABLE_SLP),false)
566 $(error PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid, must be true or false)
567 endif
568 endif
|
569 karl 1.39 endif
|
570 karl 1.36
|
571 a.dunfey 1.113.2.2
572 ############################################################################
573 #
574 # PEGASUS_USE_OPENSLP
575 #
576 # Environment variable to set openslp as SLP environment to use
577 # for SLP Directory and User Agents.
578 #
579 # Allows enabling use of openslp interfaces for slp instead of the
580 # internal pegasus slp agent. Note that this does not disable the
581 # compilation of the internal agent code, etc. However, it assumes
582 # openslp is installed on the platform and changes the interfaces
583 # to match this. At this moment, this is a change specifically for
584 # adaptec but we expect to generalize it to provide openslp as a
585 # generalized alternative to ldapslp.
586 # to use this. To set this function up,
587 #
588 # Use this variable in conjunction with PEGASUS_OPENSLP_HOME
589 # to enable OpenSlp as the slp implementation.
590 #
591 # NOTE that it has no affect if the PEGASUS_ENABLE_SLP etc. flags are not set.
592 a.dunfey 1.113.2.2 #
593
594 ifdef PEGASUS_USE_OPENSLP
595 ifeq ($(PEGASUS_ENABLE_SLP),true)
596 DEFINES += -DPEGASUS_USE_OPENSLP
597 else
598 $(error PEGASUS_USE_OPENSLP defined but PEGASUS_ENABLE_SLP is not true. Please correct this inconsistency)
599 endif
600 endif
601
602
603 ############################################################################
604 #
605 # PEGASUS_OPENSLP_HOME
606 #
607 # Environment variable to set home location for OpenSLP include and library
608 # files if they are located somewhere other than /usr/include and /usr/lib.
609 #
610 # PEGASUS_USE_OPENSLP must also be defined for this environment variable
611 # to have any effect.
612 #
613 a.dunfey 1.113.2.2 # This is the directory level within which both the include and lib
614 # directories holding the OpenSLP files will be found.
615 #
616 # EG: If the are located in /opt/OpenSLP/include and /opt/OpenSLP/lib
617 # then this environment variable should be set to /opt/OpenSLP.
618 #
619
620
621 #
622 # Enable this flag to allow the handshake to continue regardless of verification result
623 #
624 ifdef PEGASUS_OVERRIDE_SSL_CERT_VERIFICATION_RESULT
625 DEFINES += -DPEGASUS_OVERRIDE_SSL_CERT_VERIFICATION_RESULT
626 endif
627
|
628 karl 1.60 # set PEGASUS_DEBUG into the DEFINES if it exists.
629 # Note that this flag is the general separator between
630 # debug compiles and non-debug compiles and controls both
631 # the use of any debug options on compilers and linkers
632 # and general debug support that we want to be turned on in
|
633 chip 1.76 # debug mode.
|
634 karl 1.60 ifdef PEGASUS_DEBUG
|
635 david.dillard 1.65 DEFINES += -DPEGASUS_DEBUG
|
636 kumpf 1.88
637 # Indications debugging options
638 ifdef PEGASUS_INDICATION_PERFINST
639 DEFINES += -DPEGASUS_INDICATION_PERFINST
640 endif
641
642 ifdef PEGASUS_INDICATION_HASHTRACE
643 DEFINES += -DPEGASUS_INDICATION_HASHTRACE
644 endif
|
645 karl 1.60 endif
646
|
647 chuck 1.42 # compile in the experimental APIs
|
648 david.dillard 1.65 DEFINES += -DPEGASUS_USE_EXPERIMENTAL_INTERFACES
|
649 chuck 1.42
|
650 kumpf 1.93 # Ensure that the deprecated interfaces are defined in the Pegasus libraries.
651 # One may wish to disable these interfaces if binary compatibility with
652 # previous Pegasus releases is not required.
653 ifndef PEGASUS_DISABLE_DEPRECATED_INTERFACES
654 DEFINES += -DPEGASUS_USE_DEPRECATED_INTERFACES
655 endif
656
|
657 w.white 1.57 # Set compile flag to control compilation of CIMOM statistics
|
658 karl 1.73 ifdef PEGASUS_DISABLE_PERFINST
659 FLAGS += -DPEGASUS_DISABLE_PERFINST
|
660 w.white 1.57 endif
|
661 kumpf 1.56
|
662 karl 1.96 # Set compile flag to control compilation of SNIA Extensions
663 ifdef PEGASUS_SNIA_EXTENSIONS
664 FLAGS += -DPEGASUS_SNIA_EXTENSIONS
665 endif
666
|
667 a.dunfey 1.113.2.2 ifdef PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER
668 ifeq ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER), true)
669 FLAGS += -DPEGASUS_ENABLE_CMPI_PROVIDER_MANAGER
670 else
671 ifneq ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER), false)
672 $(error PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER \
673 ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER)) invalid, \
674 must be true or false)
675 endif
676 endif
677 endif
678
|
679 kumpf 1.95 # Allow remote CMPI functionality to be enabled
680 ifdef PEGASUS_ENABLE_REMOTE_CMPI
681 FLAGS += -DPEGASUS_ENABLE_REMOTE_CMPI
682 endif
683
|
684 kumpf 1.56 ############################################################
685 #
686 # Set any vendor-specific compile flags
687 #
688 ############################################################
689
690 ifdef PEGASUS_VENDOR_HP
|
691 david.dillard 1.65 DEFINES+= -DPEGASUS_VENDOR_HP
|
692 kumpf 1.56 endif
693
|
694 chip 1.76
|
695 karl 1.17 ############################################################
696 #
697 # Set up other Make Variables that depend on platform config files
698 #
699 ############################################################
700
701 # This is temporary until we end up with a better place to
702 # put this variable
703 # Makefiles can do directory remove with
704 # $(RMREPOSITORY) repositoryname
705 #
706 RMREPOSITORY = $(RMDIRHIER)
707
|
708 w.otsuka 1.63 ifdef PEGASUS_USE_RELEASE_CONFIG_OPTIONS
|
709 david.dillard 1.65 FLAGS += -DPEGASUS_USE_RELEASE_CONFIG_OPTIONS
|
710 w.otsuka 1.62 endif
711
712 ifdef PEGASUS_USE_RELEASE_DIRS
|
713 david.dillard 1.65 FLAGS += -DPEGASUS_USE_RELEASE_DIRS
|
714 w.otsuka 1.62 endif
|
715 mday 1.27
|
716 denise.eckstein 1.110 ifdef PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS
717 FLAGS += -DPEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS
718 endif
719
|
720 kumpf 1.64 # Unless otherwise specified, Pegasus libraries go in $(PEGASUS_HOME)/lib
721 ifndef PEGASUS_DEST_LIB_DIR
|
722 david.dillard 1.65 PEGASUS_DEST_LIB_DIR = lib
|
723 kumpf 1.64 endif
|
724 mday 1.28
|
725 gs.keenan 1.77 ifeq ($(OS),VMS)
726 DEFINES += -DPEGASUS_DEST_LIB_DIR="""$(PEGASUS_DEST_LIB_DIR)"""
727 else
728 DEFINES += -DPEGASUS_DEST_LIB_DIR=\"$(PEGASUS_DEST_LIB_DIR)\"
729 endif
730
|
731 w.otsuka 1.79 ################################################################################
732 ##
|
733 mike 1.105 ## PEGASUS_CLASS_CACHE_SIZE
734 ##
735 ## This environment variable gives the size of the class cache used by
736 ## the CIM repository. When it is undefined, the size defaults to something
737 ## relatively small (see src/Pegasus/Repository/CIMRepository.cpp). If
738 ## defined, it gives the size of the class cache. If it is 0 , the class
739 ## cache is not defined compiled in at all.
740 ##
741 ################################################################################
742
743 ifdef PEGASUS_CLASS_CACHE_SIZE
744 DEFINES += -DPEGASUS_CLASS_CACHE_SIZE=$(PEGASUS_CLASS_CACHE_SIZE)
745 endif
746
747 ################################################################################
748 ##
|
749 w.otsuka 1.79 ## Additional build flags passed in through environment variables.
750 ## These flags are added to the compile/link commands.
751 ##
752 ################################################################################
753
754 ifdef PEGASUS_EXTRA_CXX_FLAGS
755 EXTRA_CXX_FLAGS = $(PEGASUS_EXTRA_CXX_FLAGS)
756 endif
757
758 ifdef PEGASUS_EXTRA_C_FLAGS
759 EXTRA_C_FLAGS = $(PEGASUS_EXTRA_C_FLAGS)
760 endif
761
762 ifdef PEGASUS_EXTRA_LINK_FLAGS
763 EXTRA_LINK_FLAGS = $(PEGASUS_EXTRA_LINK_FLAGS)
764 endif
765
|
Return to
config.mak
CVS log
Up to [Pegasus] / pegasus / mak