1 karl 1.29 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
2 <html><head>
|
3 denise.eckstein 1.1
|
4 karl 1.29 <link rel="stylesheet" href="http://www.opengroup.org/stylesheets/info1.css"></head><body>
|
5 denise.eckstein 1.1 <hr>
6
7 <p align="center">
8 <b><font size="4">Recommended OpenPegasus Build and Configuration Options for Selected Platforms</font></b>
9 </p>
10
11 <hr>
12
13 <p><b>Abstract: </b>
14 This document defines a set of recommended options for building,
|
15 kumpf 1.12 testing and running OpenPegasus on a selected set of
|
16 denise.eckstein 1.1 platforms. In this version of the document, platform-specific configuration
17 information have been documented for the platforms described in the
|
18 karl 1.29 "Documented Platforms" section of this document.
|
19 denise.eckstein 1.1 </p>
20
21 <p><b>Note 1: </b>
22 The recommendations defined in this document are not intended to document
23 the feature set included in any vendor's OpenPegasus-based product.
24 Rather, the purpose of this document is to provide input to vendors when
|
25 karl 1.29 making product decisions.<br>
|
26 denise.eckstein 1.1 </p>
27
28 <hr>
29
30 <h2>Definition of the Problem</h2>
31
32 <p>OpenPegasus supports a large number of build and runtime options.
33 Determining which options to use can be challenging. The purpose of this
34 document is to simplify the build, testing and administration of OpenPegasus
35 by providing a recommended, tested set of options.</p>
36
37 <h2>Documented Platforms</h2>
38
39 <p>Support for the OpenPegasus build and runtime options described in
|
40 kumpf 1.12 this document varies by platform. In this version of the
41 document, platform-specific configuration information has been included
|
42 denise.eckstein 1.1 for the platforms described in the following table. For all other
|
43 kumpf 1.12 platforms, please consult the OpenPegasus Platform Advocate for
|
44 denise.eckstein 1.1 additional information.</p>
45
46 <ul>
|
47 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" border="1" cellspacing="1" width="20%">
48 <tbody><tr>
49 <th align="center" bgcolor="#cae6ca">Platform</th>
50 <th align="center" bgcolor="#cae6ca">Status</th>
|
51 denise.eckstein 1.1 </tr>
52 <tr align="left">
53 <td>HPUX_IA64_ACC</td>
54 <td> </td>
55 </tr>
56 <tr align="left">
57 <td>HPUX_PARISC_ACC</td>
58 <td> </td>
59 </tr>
60 <tr align="left">
61 <td>LINUX_IA64_GNU</td>
62 <td> </td>
63 </tr>
64 <tr align="left">
65 <td>LINUX_IX86_GNU</td>
66 <td> </td>
67 </tr>
68 <tr align="left">
69 <td>LINUX_PPC64_GNU</td>
70 <td> </td>
71 </tr>
72 denise.eckstein 1.1 <tr align="left">
73 <td>LINUX_PPC_GNU</td>
74 <td> </td>
75 </tr>
76 <tr align="left">
|
77 marek 1.31 <td>LINUX_PPC_E500_GNU</td>
78 <td> </td>
79 </tr>
80 <tr align="left">
|
81 marek 1.42 <td>LINUX_SH4_GNU</td>
82 <td> </td>
83 </tr>
84 <tr align="left">
|
85 denise.eckstein 1.1 <td>LINUX_XSCALE_GNU</td>
86 <td> </td>
87 </tr>
88 <tr align="left">
89 <td>LINUX_ZSERIES64_GNU</td>
90 <td> </td>
91 </tr>
92 <tr align="left">
93 <td>LINUX_ZSERIES_GNU</td>
94 <td> </td>
95 </tr>
96 <tr align="left">
97 <td>VMS_ALPHA_DECCXX</td>
98 <td> </td>
99 </tr>
100 <tr align="left">
101 <td>VMS_IA64_DECCXX</td>
102 <td> </td>
103 </tr>
|
104 karl 1.29 </tbody></table>
|
105 denise.eckstein 1.1 </ul>
106
107 <h2>Proposed Solution</h2>
108
109 <h3>Security Considerations</h3>
110 <ol>
111 <li>
112 To avoid introducing security vulnerabilities, vendors must never
113 ship providers incompatible with the security assumptions used in
|
114 kumpf 1.12 their deployment.
115 For example, providers designed for a single-user deployment that
116 don't perform authorization must not be shipped with a CIM Server
117 that expects the providers to perform authorization. Note that
|
118 denise.eckstein 1.1 this authorization burden is considerably lighter if the provider
119 is registered as 'run as requestor' and if the CIM Server enables
|
120 karl 1.29 that feature. See <a href="http://www.openpegasus.org/pp/uploads/40/7197/SecurityGuidePEP.htm">
|
121 denise.eckstein 1.1 PEP#223 - Security Coding Guidelines</a> for additional
122 details.
123 </li>
124 <li>
125 Vendors should ensure they configure the CIM Server consistently
126 with the security requirements of their deployment.
127 </li>
128 </ol>
129
130 <h3>Terminology Notes</h3>
131 <ol>
132 <li>
|
133 karl 1.29 In this document, the term "Not Set" is used to indicate
|
134 denise.eckstein 1.1 that the a value for the environment variable has not been defined.
|
135 karl 1.29 "Set" is used to indicate that the value must be defined,
|
136 denise.eckstein 1.1 but the actual value of the variable is not checked.
137 </li>
138 </ol>
139
140 <h3>General Notes</h3>
141
142 <ol>
143 <li>
|
144 kumpf 1.12 Not all functionality described in this document has achieved
|
145 karl 1.29 "Green"status, please refer to the
146 <a href="http://www.openpegasus.org/page.tpl?CALLER=index.tpl&ggid=799">
|
147 denise.eckstein 1.1 OpenPegasus Project Feature Status </a>page for information on
148 the maturity level of OpenPegasus features.
149 </li>
150 <li>
151 To encourage testing of new functionality, recommendations for the
152 Development Build may include features that are not yet recommended
153 for Release Builds.
154 </li>
155 </ol>
156
157 <h3>Environment Variable Settings for <u>Building</u> OpenPegasus</h3>
158
159 <h4>Definitions</h4>
160
161 <h5>ICU_INSTALL</h5>
162 <ul>
163 <b>Description: </b>When set, points to the directory containing
164 the <a href="%20http:/oss.software.ibm.com/icu"> ICU(International
|
165 kumpf 1.12 Components for Unicode)</a> installation. The 'include'
|
166 denise.eckstein 1.1 subdirectory is used to locate ICU header files at build time. The
167 'lib' subdirectory is used to locate ICU libraries at link
168 time.<br>
169 <b>Default Value: </b>Not Set<br>
170 <b>Recommended Value (Development Build): </b>Not Set<br>
171 <b>Recommended Value (Release Build): </b>Not Set<br>
172 <b>Required: </b>No. However, if PEGASUS_HAS_ICU is
173 set and ICU_INSTALL is not defined, the ICU libraries and header
174 files are expected to be installed in directories (e.g.,/usr/lib,
175 /usr/include) that are searched by default.<br>
176 <b>Considerations: </b>This environment variable is only used
177 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
178 additional details.
179 </ul>
180
181 <h5>ICU_ROOT_BUNDLE_LANG</h5>
182 <ul>
183 <b>Description: </b>If set, specifies the language
184 to be used to generate the root resource bundle. The
185 default value for ICU_ROOT_BUNDLE_LANG is _en.<br>
186 <b>Default Value: </b>_en<br>
187 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>No
188 Recommendation<br>
189 <b>Recommended Value (Release Build): </b>No Recommendation<br>
190 <b>Required: </b>No<br>
191 <b>Considerations: </b>This environment variable is
192 only used if PEGASUS_HAS_MESSAGES is set. Refer to
193 PEGASUS_HAS_MESSAGES for additional details.<br>
194 If set, resource bundles for the designated language must
195 exist for the following files:
196 <ul>
197 <li>pegasus/src/Pegasus/msg/Server/pegasusServer_en.txt</li>
198 <li>pegasus/src/Pegasus/msg/Listener/pegasusListener_en.txt</li>
199 </ul>
200 </ul>
201
202
203 <h5>OPENSSL_BIN</h5>
204 <ul>
205 <b>Description: </b>Specifies the location of the
206 OpenSSL <i>binary</i> directory. <br>
207 <b>Default Value: </b>Not Set<br>
208 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>
209 No Specific Recommendation<br>
210 <b>Recommended Value (Release Build): </b>
211 No Specific Recommendation<br>
212 <b>Required: </b>No. By default, the openssl binary is
213 expected to be installed in a directory that is searched by default
214 (e.g., /usr/bin). For platforms where this isn't true, the
215 OPENSSL_BIN environment variable may be used to define an
|
216 kumpf 1.12 alternative path. This environment variable is only used if
|
217 denise.eckstein 1.1 PEGASUS_HAS_SSL is set.
218 </ul>
219
220 <h5>OPENSSL_HOME</h5>
221 <ul>
222 <b>Description: </b>Specifies the location of the OpenSSL
223 SDK directory. This directory must contain the OpenSSL
224 <i>include</i> directory, $(OPENSSL_HOME)/include, and the OpenSSL
225 <i>library</i> directory, $(OPENSSL_HOME)/lib.<br>
226 <b>Default Value: </b>Not Set<br>
227 <b>Recommended Value (Development Build): </b>
228 No Specific Recommendation<br>
229 <b>Recommended Value (Release Build): </b>
230 No Specific Recommendation<br>
231 <b>Required: </b>Yes for Windows, if PEGASUS_HAS_SSL
232 is set. No for all other platforms. For AIX, the default
|
233 kumpf 1.12 value for OPENSSL_HOME is /usr/linux. For all other
|
234 denise.eckstein 1.1 platforms, the OpenSSL include files and libraries are expected
235 to be installed in directories that are searched by default (e.g.,
|
236 kumpf 1.12 /usr/bin, /usr/lib(64), and /usr/include).
|
237 denise.eckstein 1.1 For platforms where the default value is not correct, the
238 OPENSSL_HOME environment variable may be used to define an
239 alternative path (i.e., $(OPENSSL_HOME)/lib and
240 $(OPENSSL_HOME)/include). This environment variable
241 is only used if PEGASUS_HAS_SSL is set.
242 </ul>
243
244 <h5>PEGASUS_ALLOW_ABSOLUTEPATH_IN_PROVIDERMODULE</h5>
245 <ul>
246 <b>Description: </b>If set to true, a version of OpenPegasus
247 will be built that allows an absolute path to be specified as the
248 value of the Location property of PG_ProviderModule class.
249 Otherwise it does not allow the absolute path to be specified.<br>
250 <b>Default Value: </b>Not Set<br>
|
251 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
252 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
253 <b>Required: </b>No<p>
254 <b>Considerations: </b>To avoid introducing security
255 vulnerabilities, vendors should analyze their deployment
256 environments to understand the security implications of allowing
257 providers to be loaded from a dynamically changing set of
258 directories.<br>
|
259 karl 1.29 </p></ul>
|
260 denise.eckstein 1.1
261 <h5>PEGASUS_CCOVER</h5>
262 <ul>
263 <b>Description: </b>This flag is currently only supported on
|
264 kumpf 1.12 HP-UX. It is enabled on the Nightly Build & Test system,
|
265 denise.eckstein 1.1 HP-UX_11iv3_Integrity_C-Cover. This system is
|
266 kumpf 1.12 used to generate the nightly BullseyeCoverage code coverage
|
267 denise.eckstein 1.1 metrics.<br>
268 <b>Default Value: </b>Not Set<br>
|
269 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
270 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
271 <b>Required: </b>No<br>
|
272 kumpf 1.12 <b>Considerations: </b>This flag is only supported on HP-UX to enable
|
273 karl 1.29 CCOVER for the NB&T system.<br>
|
274 denise.eckstein 1.1 </ul>
275
276 <h5>PEGASUS_CIM_SCHEMA</h5>
277 <ul>
|
278 karl 1.29
|
279 denise.eckstein 1.1 <b>Description: </b>This variable is used internally by the
|
280 karl 1.29 OpenPegasus development team when testing OpenPegasus in the integrated
281 build/test environment. It defines the version of the CIM Schema (which
282 must exist in the $(PEGASUS_ROOT)/Schemas directory) that will be used
283 to build the class repository for testing the pegasus environment
284 ("make repository", etc.).<br>
|
285 dl.meetei 1.40 <b>Default Value: </b>CIM236 (Note that this may change as newer versions of the CIM Schema are used as the default.<br>
|
286 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>
287 No Specific Recommendation<br>
288 <b>Recommended Value (Release Build): </b>
289 No Specific Recommendation<br>
290 <b>Required: </b>No <br>
|
291 karl 1.29 <b>Considerations:</b>
292 Additional code changes may be required when upgrading or downgrading
293 the CIM Schema version from the default. The default CIM Schema
294 is defined in the file $(PEGASUS_ROOT)/mak/config.mak.<br>
295 <br>
296 <p></p>
|
297 denise.eckstein 1.1 </ul>
298
|
299 karl 1.29
|
300 denise.eckstein 1.1 <h5>PEGASUS_CLASS_CACHE_SIZE</h5>
301 <ul>
302 <b>Description: </b>This environment variable gives the size of
303 the class cache used by CIM repository. This variable defines the
304 size of the class cache (i.e., the maximum number of classes that
|
305 kumpf 1.12 may be included). If this variable is set to 0, class caching is
|
306 denise.eckstein 1.1 disabled.<br>
307 <b>Default Value: </b>8<br>
308 <b>Recommended Value (Development Build): </b>8<br>
309 <b>Recommended Value (Release Build): </b>8<br>
|
310 karl 1.29 <b>Required: </b>No <p></p>
|
311 denise.eckstein 1.1 </ul>
312
313 <h5>PEGASUS_DEBUG</h5>
314 <ul>
|
315 kumpf 1.12 <b>Description: </b>Builds a debug version of OpenPegasus.
316 Concurrently, this flag controls a) enabling compiler specific
317 debug flags and b) the inclusion of debug-specific
|
318 denise.eckstein 1.1 functionality.<br>
319 <b>Default Value: </b>Not Set<br>
320 <b>Recommended Value (Development Build): </b>Set<br>
321 <b>Recommended Value (Release Build): </b>Not Set<br>
322 <b>Required: </b>No
323 </ul>
324
325 <h5>PEGASUS_DEFAULT_USERCTXT_REQUESTOR</h5>
326 <ul>
327 <b>Description: </b> If set to true, the <i>Requestor</i> user
328 context is used for providers that do not specify a UserContext
329 value in their registration. Otherwise, the <i>Privileged</i> user
330 context value is used by default. <br>
331 <b>Default Value: </b>false<br>
332 <b>Recommended Value (Development Build): </b>false<br>
333 <b>Recommended Value (Release Build): </b>false<br>
334 <b>Required: </b>No
335 <b>Considerations:</b> Use of the <i>Requestor</i> default has
336 improved provider security characteristics. However, some providers
337 may not operate correctly when run in the <i>Requestor</i> user
338 context and setting this value to true may cause those providers to
339 denise.eckstein 1.1 fail. Providers that can run in the <i>Requestor</i>
340 user context are encouraged to explicitly set the UserContext value
341 in their registration rather than rely on the default setting
|
342 kumpf 1.12 default by this variable. Please refer to
|
343 denise.eckstein 1.1 SecurityGuidelinesForDevelopers.html. PEP 223 for a discussion
|
344 kumpf 1.12 of the rationale/advantages of running providers in the
|
345 denise.eckstein 1.1 <i>Requestor </i> user context. <b>Note:</b> This build
|
346 kumpf 1.12 variable is not meaningful if the Provider User Context feature is
347 disabled with the PEGASUS_DISABLE_PROV_USERCTXT
|
348 denise.eckstein 1.1 setting.
349 </ul>
350
351
352 <h5>PEGASUS_DEFAULT_ENABLE_OOP</h5>
353 <ul>
354 <b>Description: </b>When this variable is set to false, by
355 default, Providers are run in the cimserver process
|
356 kumpf 1.12 (forceProviderProcesses=false). If this value is set true,
|
357 denise.eckstein 1.1 Providers are run out-of-process by default.<br>
358 <b>Default Value: </b>true for HP-UX and Linux, false for
359 other platforms<br>
360 <b>Recommended Value (Development Build): </b>true (HP-UX,
361 Linux)<br>
362 <b>Recommended Value (Release Build): </b>true (HP-UX,
363 Linux)<br>
364 <b>Required: </b>No<br>
|
365 kumpf 1.12 <b>Considerations: </b>This environment variable can be used to
|
366 karl 1.29 change the "hard-coded" default setting for the
|
367 denise.eckstein 1.1 forceProviderProcesses configuration value.
368 Refer to the definition of <b>forceProviderProcesses</b> for
369 additional information.
370 </ul>
371
372 <h5>PEGASUS_DEST_LIB_DIR</h5>
373 <ul>
374 <b>Description: </b>Specifies the location of OpenPegasus
375 shared libraries.<br>
376 <b>Default Value: </b>$(PEGASUS_HOME)/lib<br>
377 <b>Recommended Value (Development Build): </b>
378 $(PEGASUS_HOME)/lib<br>
379 <b>Recommended Value (Release Build): </b>
380 No Specific Recommendation <br>
381 <b>Required: </b>No<br>
382 <b>Considerations: </b>This variable is NOT is used to define
|
383 kumpf 1.12 the location of the Provider library directories.
|
384 denise.eckstein 1.1 Please refer to the providerDir configuration option for details
385 on defining the directories for the Provider libraries.
386 </ul>
387
388
389 <h5>PEGASUS_DISABLE_DEPRECATED_INTERFACES</h5>
390 <ul>
|
391 kumpf 1.12 <b>Description: </b>Removes deprecated symbol definitions
|
392 denise.eckstein 1.1 from OpenPegasus runtime libraries.<br>
393 <b>Default Value:</b> Not Set<br>
394 <b>Recommended Value (Development Build):</b> Not Set<br>
395 <b>Recommended Value (Release Build): </b>Not Set<br>
396 <b>Required: </b>No<br>
397 <b>Considerations: </b>If this option is set, the resulting
|
398 kumpf 1.12 OpenPegasus libraries will not be binary compatible with
399 clients and providers built using interface definitions from
|
400 denise.eckstein 1.1 prior releases. This option may be used to slightly reduce binary
401 footprint in an environment where compatibility is not required.<br>
402 </ul>
403
404 <h5>PEGASUS_DISABLE_INSTANCE_QUALIFIERS</h5>
405 <ul>
406 <b>Description: </b>In the CIM Infrastructure Specification,
407 version 2.3, the DMTF clarified that instance-level qualifiers are
408 not allowed. In Version 1.2 of the Specification CIM
409 Operations over HTTP, use of the IncludeQualifiers parameter has
410 been DEPRECATED.<br>
411 <b>Default Value:</b> Not Set<br>
412 <b>Recommended Value (Development Build):</b> Not Set<br>
413 <b>Recommended Value (Release Build): </b>Not Set<br>
414 <b>Required: </b>No<br>
415 <b>Considerations: </b>Existing CIM Clients may depend on
|
416 kumpf 1.12 qualifiers being returned in the response. In this case, the
417 PEGASUS_DISABLE_INSTANCE_QUALIFIERS should not be set.
|
418 denise.eckstein 1.1 If this flag is set, the value of the IncludeQualifiers parameter
419 passed on the GetInstance and EnumerateInstance operations is
|
420 kumpf 1.12 ignored and qualifiers are not returned.
|
421 denise.eckstein 1.1 Disabling the return of qualifiers as part of a CIM Instance will
422 improve performance.<br>
423 </ul>
424
425 <h5>PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET</h5>
426 <ul>
427 <b>Description: </b>Disables support for local (same-system)
428 connections over a Unix domain socket. If this option is NOT set,
|
429 kumpf 1.12 the CIM Server is built to allow connections to be established
|
430 denise.eckstein 1.1 using a domain socket rather than a TCP port.<br>
431 <b>Default Value: </b>Not Set <br>
432 <b>Recommended Value (Development Build): </b>Not Set<br>
433 <b>Recommended Value (Release Build): </b>Not Set<br>
434 <b>Required: </b>No<br>
435 <b>Considerations: </b>(1) In high-threat environments, a
436 customer may want to disable all ports or reduce the number of
|
437 kumpf 1.12 exposed network ports. Supporting a local connection mechanism
|
438 denise.eckstein 1.1 using Unix domain socket allows the CIM Server to continue to
439 receive and process requests from local CIM Clients. (2)
440 Enabling this option may result in lose of functionality when
441 sslClientVerificationMode = required. (3)The
|
442 karl 1.29 "LOCAL_DOMAIN_SOCKET" functionality has not been
|
443 denise.eckstein 1.1 implemented for Windows or OpenVMS. Therefore, by
|
444 karl 1.29 default, this option is "Set" for Windows and OpenVMS
|
445 denise.eckstein 1.1 platforms.
446 </ul>
447
448 <h5>PEGASUS_DISABLE_PERFINST</h5>
449 <ul>
450 <b>Description: </b>Builds a version of OpenPegasus that
451 disables support for gathering performance data.<br>
452 <b>Default Value: </b>Not Set<br>
453 <b>Recommended Value (Development Build): </b>Not Set<br>
454 <b>Recommended Value (Release Build): </b>Set<br>
455 <b>Required: </b>No<br>
456 <b>Considerations: </b>The CIM_ObjectManager.GatherStatisticalData
457 property is used to control statistic gathering. Once enabled,
458 statistical data can be viewed by retrieving instances of the
459 CIM_StatisticalData class. Support for gathering performance
460 data requires PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
461 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
462 to false), then PEGASUS_DISABLE_PERFINST must be set to
463 true. If PEGASUS_DISABLE_PERFINST is not defined or set to
464 false and PEGASUS_ENABLE_INTEROP_PROVIDER is not set,
465 PEGASUS_ENABLE_INTEROP_PROVIDER will be automatically enabled.
466 denise.eckstein 1.1 </ul>
|
467 kumpf 1.12
|
468 denise.eckstein 1.1 <h5>PEGASUS_DISABLE_PRIVILEGED_TESTS</h5>
469 <ul>
470 <b>Description: </b>This variable is used only in the development
|
471 kumpf 1.12 environment to restrict the level of testing performed by default.
472 If set, tests that require the CIM Server to run in a privileged
473 mode will not be run. Setting this variable allows
|
474 denise.eckstein 1.1 developers, without privileged access, to successfully run a
475 subset of the OpenPegasus test suit. This variable does
476 not affect CIM Server functionality. It merely controls
477 the level of testing.<br>
478 <b>Default Value: </b>Not Set<br>
479 <b>Recommended Value (Development Build): </b>Not Set<br>
480 <b>Recommended Value (Release Build): </b>Not Used<br>
481 <b>Required: </b>No<br>
482 <b>Considerations: </b>Enabling this variable will significantly
|
483 kumpf 1.12 reduce the testing of security related features (e.g.,
|
484 denise.eckstein 1.1 authentication and authorization) and can affect testing in other
485 areas.
486 </ul>
487
488 <h5>PEGASUS_DISABLE_PROV_USERCTXT</h5>
489 <ul>
490 <b>Description: </b>Builds a version of OpenPegasus that
491 disables supports for the Provider User Context feature.
492 This feature allows a Provider to choose the user context in
493 which it is invoked, including the ability to run in the context of
494 the user requesting an operation.<br>
495 <b>Default Value: </b>Set for Windows and OpenVMS, Not Set
496 for all other platforms<br>
497 <b>Recommended Value (Development Build): </b>Set for Windows and
498 OpenVMS, Not Set for all other platforms<br>
499 <b>Recommended Value (Release Build): </b>Set for Windows and
500 OpenVMS, Not Set for all other platforms<br>
501 <b>Required: </b>No<br>
502 <b>Considerations: </b>The Provider User Context feature may be
503 disabled by compiling with the PEGASUS_DISABLE_PROV_USERCTXT flag
504 defined. In this case, the Provider Registration Manager rejects
505 denise.eckstein 1.1 provider registration requests that specify a UserContext property
506 value. The user context in which providers run is then unchanged by
|
507 kumpf 1.12 this enhancement. Some platforms, such as OS/400 and z/OS may
|
508 denise.eckstein 1.1 define the PEGASUS_DISABLE_PROV_USERCTXT as part of the platform
509 configuration, since these platforms already set the provider user
510 context on a per-thread basis. When the Provider User Context
511 feature is enabled, support for each of the User Context types may
|
512 kumpf 1.12 be disabled individually. Provider registration fails when an
|
513 denise.eckstein 1.1 unsupported UserContext value is specified. Please refer to
|
514 kumpf 1.12 SecurityGuidelinesForDevelopers.html / PEP 223 for a discussion of
515 the rationale/advantages of user context providers to many
|
516 denise.eckstein 1.1 platforms.<br>
517 </ul>
518
|
519 s.kodali 1.20 <h5>PEGASUS_EXTRA_PROVIDER_LIB_DIR</h5>
520 <ul>
521 <b>Description: </b>Specifies the location of the extra provider
522 libraries which are part of the release builds.<br>
523 <b>Default Value: </b>Not Set<br>
524 <b>Recommended Value (Development Build): </b>
525 No Specific Recommendation<br>
526 <b>Recommended Value (Release Build): </b>
527 No Specific Recommendation<br>
528 <b>Required: </b> No.<br>
529 <b>Considerations: </b> Since providerDir config property is fixed
530 and hidden in release builds, this build time option provides facilty
531 to include the extra provider directories without any security problems.
532 This build time option is useful only when PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS
533 is set.
534 </ul>
535
|
536 denise.eckstein 1.1 <h5>PEGASUS_EMANATE_INCLUDE_DIR</h5>
537 <ul>
538 <b>Description: </b>Specifies the location of the EMANATE
539 <i>include</i> directory. <br>
540 <b>Default Value: </b>Not Set<br>
541 <b>Recommended Value (Development Build): </b>
542 No Specific Recommendation<br>
543 <b>Recommended Value (Release Build): </b>
544 No Specific Recommendation<br>
545 <b>Required: </b>No. By default, the EMANATE include files
546 are expected to be installed in directories that are searched by
547 default (e.g., /usr/include). For platforms where this isn't true,
|
548 kumpf 1.12 the PEGASUS_EMANATE_INCLUDE_DIR environment variable may be used to
549 define an alternative path. This environment variable is only used
|
550 denise.eckstein 1.1 if PEGASUS_USE_EMANATE is set.<br>
|
551 kumpf 1.12 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
|
552 denise.eckstein 1.1 for additional details.<br>
553 </ul>
554
555 <h5>PEGASUS_EMANATE_LIB_DIR</h5>
556 <ul>
557 <b>Description: </b>Specifies the location of the EMANATE
558 <i>lib</i> directory. <br>
559 <b>Default Value: </b>Not Set<br>
560 <b>Recommended Value (Development Build): </b>
561 No Specific Recommendation<br>
562 <b>Recommended Value (Release Build): </b>
563 No Specific Recommendation<br>
|
564 kumpf 1.12 <b>Required: </b>No. By default, the EMANATE libraries are
565 expected to be installed in directories that are searched by
566 default (e.g., /usr/lib, /usr/lib64). For platforms where this
|
567 denise.eckstein 1.1 isn't true, the PEGASUS_EMANATE_LIB_DIR environment variable may
568 be used to define an alternative path. This environment variable
569 is only used if PEGASUS_USE_EMANATE is set.<br>
570 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
571 for additional details.<br>
572 </ul>
573
574 <h5>PEGASUS_ENABLE_AUDIT_LOGGER</h5>
575 <ul>
576 <b>Description: </b>When this variable is set to false, support
577 for audit logging will NOT be built into OpenPegasus. If this
578 variable is set to true, or not set, support for audit logging
579 will be included in the build. All other values are invalid.<br>
580 <b>Default Value: </b>true<br>
581 <b>Recommended Value (Development Build): </b>true<br>
582 <b>Recommended Value (Release Build): </b>true<br>
583 <b>Required: </b>No<br>
584 </ul>
585
586
587 <h5>PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER</h5>
588 denise.eckstein 1.1 <ul>
589 <b>Description: </b>If set to true, a version of OpenPegasus
590 that supports CMPI providers and their dependent components is
591 built. If this variable is not set or set to false, support
592 for CMPI providers will not be included. <br>
593 <b>Default Value: </b>true for Linux and OpenVMS, false for
594 other platforms<br>
|
595 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (Linux
|
596 denise.eckstein 1.1 Platform Only)<br>
597 <b>Recommended Value (Release Build): </b>true (Linux Platform
598 Only)<br>
|
599 karl 1.29 <b>Required: </b>No<p></p>
|
600 denise.eckstein 1.1 </ul>
601
602 <h5>PEGASUS_ENABLE_COMPRESSED_REPOSITORY</h5>
603 <ul>
604 <b>Description: </b>If set the Repository Compression logic is
605 built and enabled and compressed and non compressed repositories
606 are supported. If not set then compressed repositories are not
607 supported.<br>
608 <b>Default Value: </b>Not Set<br>
609 <b>Recommended Value (Development Build): </b>Not Set<br>
610 <b>Recommended Value (Release Build): </b>Not Set<br>
611 <b>Required: </b>No<p>
|
612 kumpf 1.12 <b>Considerations: </b>See
|
613 denise.eckstein 1.1 pegasus/readme.compressed_repository</p>
614 </ul>
615
616
617 <h5>PEGASUS_ENABLE_CQL</h5>
618 <ul>
619 <b>Description: </b>When this variable is set to false, support
620 for Indication Subscription filters that have CQL as the language
621 is disabled. It does not remove CQL from the build.<br>
622 <b>Default Value:</b> Not Set<br>
623 <b>Recommended Value (Development Build):</b> Not Set<br>
624 <b>Recommended Value (Release Build):</b> false<br>
625 <b>Required: </b>No<br>
|
626 kumpf 1.12 <b>Considerations: </b>The DMTF CIM Query Language
627 Specification is Preliminary and subject to backward incompatible
628 changes.
|
629 denise.eckstein 1.1 </ul>
630
631 <h5>PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT</h5>
632 <ul>
633 <b>Description: </b>When this variable is set to true, support the
634 DMTF Indications Profile (DSP1054) is included in OpenPegasus.
635 If this variable is not set or set to false, support for the DMTF
636 Indications Profile will not be included.<br>
637 <b>Default Value:</b> Not Set<br>
638 <b>Recommended Value (Development Build):</b> Not Set<br>
639 <b>Recommended Value (Release Build):</b> Not Set<br>
640 <b>Required: </b>No<br>
641 <b>Considerations: </b>The implementation of this feature is
642 based on a preliminary version of the DMTF Indications Profile,
643 DSP1053, and subject to change. If this variable is enabled,
|
644 kumpf 1.12 two DMTF experimental class definitions, CIM_IndicationService and
645 CIM_IndicationServiceCapabilities, will be added to the
|
646 denise.eckstein 1.1 root/PG_InterOp namespace. Experimental class definitions are
647 subject to change.
|
648 kumpf 1.12 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT requires
|
649 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled.
650 If PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
651 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT to true, will also
652 enable PEGASUS_ENABLE_INTEROP_PROVIDER. If
653 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
654 to false), a build error will be generated.
655 </ul>
656
657 <h5>PEGASUS_ENABLE_EXECQUERY</h5>
658 <ul>
659 <b>Description: </b>When this environment variable is set,
|
660 kumpf 1.12 processing of ExecQuery operations is enabled. When not set,
|
661 denise.eckstein 1.1 ExecQuery operation requests get a NotSupported response. (Note:
662 The PEGASUS_ENABLE_EXECQUERY environment variable controls
663 the definition of the PEGASUS_DISABLE_EXECQUERY compile macro.) <br>
664 <b>Default Value: </b>Not Set<br>
665 <b>Recommended Value (Development Build): </b>Not Set<br>
666 <b>Recommended Value (Release Build): </b>Not Set<br>
667 <b>Required: </b>No
668 </ul>
669
670 <h5>PEGASUS_ENABLE_EMAIL_HANDLER</h5>
671 <ul>
672 <b>Description: </b> When this environment variable is set, an
|
673 kumpf 1.12 E-Mail Indication Handler is built as part of the OpenPegasus
674 build. The E-Mail Indication Handler can be used to
|
675 denise.eckstein 1.1 delivered CIM Indications to a designated e-mail address.<br>
676 <b>Default Value: </b>Not Set<br>
677 <b>Recommended Value (Development Build): </b>Not Set<br>
678 <b>Recommended Value (Release Build): </b>Not Set<br>
679 <b>Required: </b>No<br>
680 <b>Considerations: </b>If PEGASUS_ENABLE_EMAIL_HANDLER is
681 not set when OpenPegasus is built, a request to create an Email
682 Indication Handler instance will be rejected will the error
683 CIM_ERR_NOT_SUPPORTED.
684 </ul>
685
686 <h5>PEGASUS_ENABLE_GCOV</h5>
687 <ul>
688 <b>Description: </b>GCOV,
689 <a href="http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov">
690 http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov</a>, is a
691 code coverage utility. If PEGASUS_ENABLE_GCOV is set,
692 GCC will instrument the code to support analysis by GCOV.<br>
693 <b>Default Value: </b>Not Set<br>
694 <b>Recommended Value (Development Build): </b>
695 Not Set<br>
696 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
697 <b>Required: </b>No<br><b>Considerations: </b>
698 This flag is currently only supported with GCC on Linux.
699 <ul>
|
700 karl 1.29 Note: LCOV, <a href="http://ltp.sourceforge.net/coverage/lcov.php">
|
701 kumpf 1.12 http://ltp.sourceforge.net/coverage/lcov.php</a>, is a
|
702 denise.eckstein 1.1 graphical front-end extension for GCOV. It collects GCOV data
703 for multiple source files and creates HTML pages with coverage
|
704 kumpf 1.12 information. You can use the following steps to use LCOV to
|
705 denise.eckstein 1.1 analyze OpenPegasus GCOV data.
706 <ol>
707 <li>Set PEGASUS_ENABLE_GCOV = true.</li>
|
708 kumpf 1.12 <li>Build and test OpenPegasus (e.g.,
709 <i>make -f pegasus/TestMakefile build
|
710 denise.eckstein 1.1 alltests</i>).</li>
711 <li>For each source directory,
712 <ul>
713 <li>copy the .gcda and .gcno files from the object
|
714 kumpf 1.12 directory to the source directory (e.g.,
715 <i>cp build/obj/Pegasus/Common/*.gcda
|
716 denise.eckstein 1.1 src/Pegasus/Common/</i>);</li>
|
717 kumpf 1.12 <li>execute the <b>lcov</b> command
718 (e.g.,
|
719 denise.eckstein 1.1 <i>lcov --directory src/Pegasus/Common/ --capture
720 --output-file result.info</i>) to build the result.info
721 file; and finally,</li>
722 <li>use the <b>genhtml</b> command to generate the .html
723 output (e.g., <i>genhtml result.info</i>). The
724 top .html file is named index.html.</li>
725 </ul>
|
726 karl 1.29 </li></ol>
|
727 denise.eckstein 1.1 </ul>
728 </ul>
|
729 kumpf 1.12
|
730 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INDICATION_COUNT</h5>
731 <ul>
|
732 kumpf 1.12 <b>Description: </b>If true, the CIM
|
733 denise.eckstein 1.1 Server will be built to count the number of CIM indications
734 generated by providers and matched with subscriptions. If false
735 or not set, indication statistic support will not be included.
736 <b>Default Value: </b>true<br>
737 <b>Recommended Value (Development Build): </b>true <br>
738 <b>Recommended Value (Release Build): </b>true <br>
739 <b>Required: </b>No <br>
740 <b>Considerations: </b>The number of CIM indications generated by
741 providers and matched with subscriptions is stored in hash tables
742 which causes memory usage to increase by 4 bytes for each
743 active subscription and by about 400 bytes for each active
744 indication provider.<br>
745 </ul>
746
|
747 mike 1.10 <h5>PEGASUS_ENABLE_PROTOCOL_BINARY</h5>
748 <ul>
749 <b>Description: </b>If true, OpenPegasus uses a faster binary
|
750 marek 1.26 protocol between local clients and the CIM server. If false, OpenPegasus
751 uses the conventional XML-based protocol instead.
752 See PEP#340 for more details.
|
753 mike 1.10 <br>
754 <b>Default Value: </b>false<br>
755 <b>Recommended Value (Development Build): </b>false<br>
756 <b>Recommended Value (Release Build): </b>false<br>
757 <b>Required: </b>No<br>
758 <b>Considerations: </b>This option improves performance by using a faster
759 binary protocol between local clients and the CIM server.
|
760 mike 1.8 <br>
761 </ul>
762
|
763 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INTEROP_PROVIDER</h5>
764 <ul>
765 <b>Description: </b>If true, the OpenPegasus Interop Provider
766 will be build. If false or not set, the OpenPegasus Interop
767 Provider will not be built.<br>
768 <b>Default Value: </b>Not Set<br>
769 <b>Recommended Value (Development Build): </b>Not Set<br>
770 <b>Recommended Value (Release Build): </b>false<br>
771 <b>Required: </b>No <br>
772 <b>Considerations: </b> A number of features controlled by
773 OpenPegasus build options are dependent on the Interop
|
774 kumpf 1.12 Provider. Please refer to PEGASUS_ENABLE_SLP,
775 PEGASUS_DISABLE_PERFINST, and
|
776 denise.eckstein 1.1 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT for additional
777 details.<br>
778 </ul>
779
|
780 anusha.kandepu 1.32 <h5>PEGASUS_INTEROP_NAMESPACE</h5>
781 <ul>
782 <b>Description: </b>This variable is used for configuring the Interop
783 namespace name. This option helps to establish a consistent Interop
784 Namespace as mentioned in DMTF specification.(DSP1033)<br>
785 <b>Default Value: </b>root/PG_InterOp<br>
786 <b>Recommended Value (Development Build): </b>Not Set<br>
787 <b>Recommended Value (Release Build): </b>Not Set<br>
788 <b>Required: </b>No <br>
789 <b>Considerations: </b>The accepted values for this environment
790 variable are "root/PG_InterOp" or "interop" or "root/interop". For
791 any other value, the default value will be used.With the usage of
792 this build option, we have to start using pegasus with fresh repository.
793 </ul>
794
|
795 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_IPV6</h5>
796 <ul>
797 <b>Description: </b>This variable can be used to specify
798 whether IPv6 support should be included in OpenPegasus.<br>
799 <b>Default Value: </b>true<br>
800 <b>Recommended Value (Development Build): </b>true<br>
801 <b>Recommended Value (Release Build): </b>true<br>
802 <b>Required: </b>No<br>
803 <b>Considerations: </b>When this variable is set to
804 'false', support for IPv6 socket APIs and structures is disabled,
|
805 kumpf 1.12 and the CIM Server will not accept connections to or from IPv6
|
806 denise.eckstein 1.1 network interfaces. When this variable is set to 'true', the
|
807 kumpf 1.12 newer IPv6 socket APIs and structures will be included when
808 OpenPegasus is built, so they must be supported on the build
809 platform. However, if IPv6 is not supported on the platform on
|
810 denise.eckstein 1.1 which an IPv6-enabled version of OpenPegasus is run, then the IPv6
811 feature will be disabled at run-time and only IPv4 connections
812 will be supported.
813 </ul>
814
815 <h5>PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER</h5>
816 <ul>
817 <b>Description: </b>If true, a version of OpenPegasus that
818 supports JMPI providers and their dependent components is built.
819 If false or not set, support for JMPI Providers is not included
820 in OpenPegasus. All other values are invalid.<br>
821 <b>Default Value: </b>false<br>
822 <b>Recommended Value (Development Build): </b>false<br>
823 <b>Recommended Value (Release Build): </b>false<br>
|
824 karl 1.29 <b>Required: </b>No<p></p>
|
825 denise.eckstein 1.1 </ul>
826
827 <h5>PEGASUS_ENABLE_OBJECT_NORMALIZATION</h5>
828 <ul>
|
829 kumpf 1.12 <b>Description: </b>If set, builds in support so that objects
830 returned from provider instance operations can be validated.
|
831 denise.eckstein 1.1 The enableNormalization must also be set to 'true' (default)<br>
832 <b>Default Value: </b>Not Set<br>
833 <b>Recommended Value (Development Build): </b>Not Set<br>
834 <b>Recommended Value (Release Build): </b>Not Set<br>
835 <b>Required: </b>No <br>
836 <b>Considerations: </b>If PEGASUS_ENABLE_OBJECT_NORMALIZATION is
837 set, two new configuration options are defined: enableNormalization
838 and excludeModulesFromNormalization.
839 </ul>
840
841 <h5>PEGASUS_ENABLE_PRIVILEGE_SEPARATION</h5>
842 <ul>
843 <b>Description: </b>If true, a version of OpenPegasus that
844 enables the Privilege Separation feature is built. This feature
845 allows the CIM Server to run in a non-privileged user context and
|
846 kumpf 1.12 use a small executor process to perform privileged operations. If
847 false or not set, the Privilege Separate feature will not be
|
848 denise.eckstein 1.1 included.<br>
849 <b>Default Value: </b>false<br>
|
850 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (HP-UX,
|
851 denise.eckstein 1.1 Linux)<br>
852 <b>Recommended Value (Release Build): </b>true (HP-UX,
853 Linux)<br>
854 <b>Required: </b>No<br>
855 <b>Considerations: </b> The Privilege Separation feature is
856 only supported on HP-UX and Linux platforms. The 'cimsrvr' user
857 must be defined on the system. If the umask setting in the
858 environment is not 0, PEGASUS_TMP must be set to a directory that
|
859 kumpf 1.12 is writable by the 'cimsrvr' user for the tests to run
|
860 denise.eckstein 1.1 successfully.
861 </ul>
862
863 <h5>PEGASUS_ENABLE_PROTOCOL_WSMAN</h5>
864 <ul>
865 <b>Description: </b>If true, a version of OpenPegasus is
866 built that accepts and processes WS-Management requests. This
|
867 kumpf 1.5 feature is initially limited to WS-Transfer and WS-Enumeration
868 operations. If false or not set, WS-Management support is not
869 built or included in any way.<br>
|
870 denise.eckstein 1.1 <b>Default Value: </b>false<br>
871 <b>Recommended Value (Development Build): </b>true<br>
872 <b>Recommended Value (Release Build): </b>false<br>
873 <b>Required: </b>No<br>
874 <b>Considerations: </b> The WS-Management standards are not
875 mature, and interoperability problems may arise. The WS-Management
|
876 kumpf 1.12 functionality may change in incompatible ways in subsequent
|
877 denise.eckstein 1.1 releases. Also note the known limitations specified in PEP 311.<br>
878 </ul>
879
880 <h5>PEGASUS_ENABLE_REMOTE_CMPI</h5>
881 <ul>
882 <b>Description: </b>If set, a version of OpenPegasus that
883 support Remote CMPI providers and their dependent components
884 is built.<br>
885 <b>Default Value: </b>Not Set<br>
886 <b>Recommended Value (Development Build): </b>Not Set<br>
887 <b>Recommended Value (Release Build): </b>Not Set<br>
|
888 karl 1.29 <b>Required: </b>No<p></p>
|
889 denise.eckstein 1.1 </ul>
890
891 <h5>PEGASUS_ENABLE_SLP</h5>
892 <ul>
893 <b>Description: </b>This variable controls of the inclusion
894 of SLP functionality in the OpenPegasus build. When this
895 environment variable is set to 'true', SLP functionality will be
|
896 kumpf 1.12 included as part of the OpenPegasus build. If
|
897 denise.eckstein 1.1 this variable is set to 'false' or not set, the SLP functionality
898 will not be included. All other values are considered
899 invalid and will result in a build error
|
900 karl 1.29 (e.g., "PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid,
901 must be true or false").<br>
|
902 denise.eckstein 1.1 <b>Default Value: </b>'true' for Windows; 'false' for all other
903 Platforms<br>
904 <b>Recommended Value (Development Build): </b>'true' for
905 Windows; 'false' for all other Platforms<br>
906 <b>Recommended Value (Release Build): </b><br>
907 <b>Required: </b>No<br>
908 <b>Considerations: </b>PEGASUS_ENABLE_SLP requires
909 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
|
910 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
|
911 denise.eckstein 1.1 PEGASUS_ENABLE_SLP to true, will also enable
|
912 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER. If
|
913 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled
914 (i.e., set to false), a build error will be generated.<br>
915 </ul>
916
917
918 <h5>PEGASUS_ENABLE_SORTED_DIFF</h5>
919 <ul>
|
920 kumpf 1.12 <b>Description: </b>This controls if the DIFFSORT function
921 is used rather than a simple DIFF of the test results files
922 to the static results file. Set to 'true' enables the sorted
923 diffs of results to static results files. Otherwise results
924 in regular diffs of results to static results files.
925 See OpenPegasus bug 2283 for background information concerning
|
926 denise.eckstein 1.1 this config variable. <br>
927 <b>Default Value: </b>true<br>
928 <b>Recommended Value (Development Build): </b>true<br>
929 <b>Recommended Value (Release Build): </b>true<br>
930 <b>Required: </b>No<p> </p>
931 </ul>
932
933 <h5>PEGASUS_ENABLE_SYSTEM_LOG_HANDER</h5>
934 <ul>
935 <b>Description: </b>When this environment variable is set, a
|
936 kumpf 1.12 SysLog Indication Handler is built as part of the OpenPegasus
937 build. The SysLog Indication Handler can be used to
|
938 denise.eckstein 1.1 delivered CIM Indications to the system log file.<br>
939 <b>Default Value: </b>Not Set<br>
940 <b>Recommended Value (Development Build): </b>Not Set<br>
941 <b>Recommended Value (Release Build): </b>Not Set<br>
942 <b>Required: </b>No<br>
|
943 kumpf 1.12 <b>Considerations: </b>If PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
|
944 denise.eckstein 1.1 is not set when OpenPegasus is built, a request to create a SysLog
|
945 kumpf 1.12 Indication Handler instance will be rejected with the error
|
946 denise.eckstein 1.1 CIM_ERR_NOT_SUPPORTED.<br>
947 </ul>
948
949 <h5>PEGASUS_ENABLE_SSLV2</h5>
950 <ul>
951 <b>Description: </b>By default, support for the SSLV2 protocol
|
952 kumpf 1.12 is disabled in OpenPegasus. The option can be used to build a
|
953 denise.eckstein 1.1 version of OpenPegasus that supports SSLV2. This variable affects
954 how SSL contexts are constructed for both the CIM Server and CIM
955 Clients.<br>
956 <b>Default Value: </b>Not Set<br>
957 <b>Recommended Value (Development Build): </b>Not Set<br>
958 <b>Recommended Value (Release Build): </b>Not Set<br>
959 <b>Required: </b>No<br>
960 <b>Considerations:</b> Unless SSLV2 is required for backward
961 compatibility, enabling this protocol is not recommended (SSLV3
962 or later is preferred).
963 </ul>
964
965 <h5>PEGASUS_ENABLE_USERGROUP_AUTHORIZATION</h5>
966 <ul>
|
967 kumpf 1.12 <b>Description: </b>Builds a version of OpenPegasus that
|
968 denise.eckstein 1.1 allows an administrator to restrict access to CIM operations
969 to members of a designated set of groups. Refer to the
970 <b>authorizedUserGroups</b>configuration option for additional
971 details.<br>
972 <b>Default Value: </b>Not Set<br>
973 <b>Recommended Value (Development Build): </b>Not Set<br>
974 <b>Recommended Value (Release Build): </b>Set<br>
975 <b>Required: </b>No<br>
976 </ul>
977
978 <h5>PEGASUS_EXTRA_C_FLAGS</h5>
979 <ul>
|
980 kumpf 1.12 <b>Description: </b>This environment variable allows a
981 developer to specify an additional set of flags to be included
|
982 denise.eckstein 1.1 on the C compile command line.<br>
983 <b>Default Value: </b>Not Set<br>
984 <b>Recommended Value (Development Build): </b>No Set<br>
985 <b>Recommended Value (Release Build): </b>Not Set<br>
986 <b>Required: </b>No
987 </ul>
988
989 <h5>PEGASUS_EXTRA_CXX_FLAGS</h5>
990 <ul>
|
991 kumpf 1.12 <b>Description: </b>This environment variable allows a
|
992 denise.eckstein 1.1 developer to specify an additional set of flags to be included
993 on the C++ compile command line.<br>
994 <b>Default Value: </b>Not Set<br>
995 <b>Recommended Value (Development Build): </b>Not Set<br>
996 <b>Recommended Value (Release Build): </b>Not Set<br>
997 <b>Required: </b>No
998 </ul>
999
1000 <h5>PEGASUS_EXTRA_LIBRARY_LINK_FLAGS</h5>
1001 <ul>
1002 <b>Description: </b>This environment variable allows a
|
1003 kumpf 1.12 developer to specify an additional set of flags to include on
|
1004 denise.eckstein 1.1 the link command line used to build a library.<br>
1005 <b>Default Value: </b>Not Set<br>
1006 <b>Recommended Value (Development Build): </b>Not Set<br>
1007 <b>Recommended Value (Release Build): </b>Not Set<br>
1008 <b>Required: </b>No
1009 </ul>
1010
1011 <h5>PEGASUS_EXTRA_LINK_FLAGS</h5>
1012 <ul>
1013 <b>Description: </b>This environment variable allows a
1014 developer to specify an additional set of flags to be included
1015 on the link command line. These flags will be included on
1016 both library and program executable link command lines.<br>
1017 <b>Default Value: </b>Not Set<br>
1018 <b>Recommended Value (Development Build): </b>Not Set<br>
1019 <b>Recommended Value (Release Build): </b>Not Set<br>
1020 <b>Required: </b>No
|
1021 kumpf 1.12 <b>Considerations: </b>Refer to PEGASUS_EXTRA_LIBRARY_LINK_FLAGS and
|
1022 denise.eckstein 1.1 PEGASUS_EXTRA_PROGRAM_FLAGS to add flags specific to either a
1023 library or program link command line.<br>
1024 </ul>
1025
1026 <h5>PEGASUS_EXTRA_PROGRAM_LINK_FLAGS</h5>
1027 <ul>
1028 <b>Description: </b>This environment variable allows a
1029 developer to specify an additional set of flags to include on
1030 the link command line used to build an executable program.<br>
1031 <b>Recommended Value (Development Build): </b>Not Set<br>
1032 <b>Recommended Value (Release Build): </b>Not Set<br>
1033 <b>Required: </b>No
1034 </ul>
1035
1036 <h5>PEGASUS_HAS_MESSAGES</h5>
1037 <ul>
|
1038 kumpf 1.12 <b>Description: </b>When set (to anything) during the build,
1039 OpenPegasus compiles with localization support. The
1040 ICU (International Components for Unicode) variables,
1041 ICU_ROOT and ICU_INSTALL, indicate that the
1042 localization support is based on ICU. Only ICU is supported
|
1043 denise.eckstein 1.1 at this time.<br>
1044 <b>Default Value: </b>Not Set<br>
1045 <b>Recommended Value (Development Build): </b>Not Set<br>
1046 <b>Recommended Value (Release Build): </b>Not Set<br>
1047 <b>Required: </b>No<br>
1048 <b>Considerations: </b>If the PEGASUS_HAS_MESSAGES is not
1049 set, OpenPegasus is built without localization support. This
1050 means that all messages sent by the CIM Server and the CLIs are in
1051 English. ICU is an open source project at
1052 <a href="http://oss.software.ibm.com/icu">
|
1053 kumpf 1.12 http://oss.software.ibm.com/icu</a>.
|
1054 denise.eckstein 1.1 Only English translations are included with the OpenPegasus
1055 distribution. The OpenPegasus distribution does not provide
1056 translated messages. But, enabling for ICU would allow vendor to
1057 provide the translations. Refer to the OpenPegasus Release README
1058 for additional information regarding the use of ICU. Although, in
|
1059 kumpf 1.12 OpenPegasus 2.3.2, experience with localization support
1060 has been limited to a select set of platforms, wider platform
|
1061 denise.eckstein 1.1 adoption of this technology is planned for 2.5.<br>
1062 </ul>
1063
1064 <h5>PEGASUS_HAS_SSL</h5>
1065 <ul>
1066 <b>Description: </b>If set, a version of OpenPegasus that
1067 supports SSL (i.e., https) is built.<br>
1068 <b>Default Value: </b>Not Set<br>
1069 <b>Recommended Value (Development Build): </b>Set<br>
1070 <b>Recommended Value (Release Build): </b>Set<br>
1071 <b>Required: </b>No<br>
|
1072 kumpf 1.12 <b>Considerations: </b>Support for SSL in OpenPegasus is
1073 dependent on the OpenSSL software developed by the
|
1074 denise.eckstein 1.1 <a href="http://www.openssl.org/">
|
1075 kumpf 1.12 OpenSSL Project (http://www.openssl.org/)</a>.
|
1076 denise.eckstein 1.1
1077 If the PEGASUS_HAS_SSL variable is set, the variable OPENSSL_HOME
1078 must also be defined. The OPENSSL_HOME variable is used, by the
|
1079 kumpf 1.12 OpenPegasus build, to determine the location of the OpenSSL
|
1080 denise.eckstein 1.1 include files, libraries and binaries.
1081 </ul>
1082
1083 <h5>PEGASUS_HOME</h5>
1084 <ul>
1085 <b>Description: </b>Specifies the location of the
1086 OpenPegasus working directory. The OpenPegasus
|
1087 kumpf 1.12 build will use this directory as the default location
|
1088 denise.eckstein 1.1 for files generated during the build (e.g., binaries,
1089 libraries, objects).<br>
1090 <b>Default Value: </b>None<br>
1091 <b>Recommended Value (Development Build): </b>
1092 No Specific Recommendation<br>
1093 <b>Recommended Value (Release Build): </b>
1094 No Specific Recommendation<br>
1095 <b>Required: </b>Yes<br>
|
1096 karl 1.29 <b>Considerations: </b>The error "PEGASUS_HOME
1097 environment variable undefined" is returned if the
|
1098 kumpf 1.12 PEGASUS_HOME environment variable is not set.
|
1099 denise.eckstein 1.1 This variable is also used during runtime. Refer to the section
|
1100 karl 1.29 titled "Environment Variable Settings for Running OpenPegasus
1101 2.3.2 on Linux" for additional details.<br>
|
1102 denise.eckstein 1.1 </ul>
1103
1104 <h5>PEGASUS_MAX_THREADS_PER_SVC_QUEUE</h5>
1105 <ul>
1106 <b>Description: </b>Controls the maximum number of threads
1107 allowed per message service queue. It is allowed to range
1108 between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT (currently 5000)
|
1109 kumpf 1.12 as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
|
1110 denise.eckstein 1.1 If set to 0 (zero) the max threads per service queue is then
1111 set to MAX_THREADS_PER_SVC_QUEUE_LIMIT. If set larger than the
|
1112 kumpf 1.12 MAX_THREADS_PER_SVC_QUEUE_LIMIT it is set equal to
|
1113 denise.eckstein 1.1 MAX_THREADS_PER_SVC_QUEUE_LIMIT. There are no other limits on the
1114 total number of threads that can exist within the system at this
|
1115 kumpf 1.12 time. When the server starts there on the order of 10 to 20
1116 message service queues created dependent upon
|
1117 denise.eckstein 1.1 build options. <br>
1118 <b>Default Value: </b>5<br>
1119 <b>Recommended Value (Development Build): </b>5<br>
1120 <b>Recommended Value (Release Build): </b>5<br>
1121 <b>Required: </b>No<br>
1122 <b>Considerations: </b>This flag affects consumption of
1123 system resources. Not setting, or inappropriately setting
1124 this value, may cause the cimserver to hang or crash.<br>
1125 </ul>
1126
1127 <h5>PEGASUS_ROOT</h5>
1128 <ul>
1129 <b>Description: </b>Specifies the location of the directory
1130 that corresponds to "pegasus" source directory defined in the
|
1131 kumpf 1.12 OpenPegasus CVS source tree. This environment variable is
1132 used by the OpenPegasus build to locate the required build
1133 and source files (e.g., $(PEGASUS_ROOT)/mak and
1134 $(PEGASUS_ROOT)/src).<br>
|
1135 denise.eckstein 1.1 <b>Default Value: </b>None<br>
1136 <b>Recommended Value (Development Build): </b>
1137 No Specific Recommendation<br>
1138 <b>Recommended Value (Release Build): </b>
1139 No Specific Recommendation<br>
1140 <b>Required: </b>Yes<br>
1141 <b>Considerations: </b>The error "PEGASUS_ROOT environment
1142 variable undefined" is returned if the PEGASUS_ROOT
1143 environment variable is not set.
1144 </ul>
1145
1146
1147 <h5>PEGASUS_NET_SNMP_INCLUDE_DIR</h5>
1148 <ul>
1149 <b>Description: </b>Specifies the location of the NET-SNMP
1150 <i>include</i> directory. <br>
1151 <b>Default Value: </b>Not Set<br>
1152 <b>Recommended Value (Development Build): </b>
1153 No Specific Recommendation<br>
1154 <b>Recommended Value (Release Build): </b>
1155 No Specific Recommendation<br>
1156 denise.eckstein 1.1 <b>Required: </b>No. By default, the NET-SNMP include
1157 files are expected to be installed in directories that
1158 are searched by default (e.g., /usr/include). For platforms
|
1159 kumpf 1.12 where this isn't true, the PEGASUS_NET_SNMP_INCLUDE_DIR
|
1160 denise.eckstein 1.1 environment variable may be used to define an alternative path.
1161 This environment variable is only used if PEGASUS_USE_NET_SNMP
1162 is set.<br>
1163 </ul>
1164
1165 <h5>PEGASUS_NET_SNMP_LIB_DIR</h5>
1166 <ul>
1167 <b>Description: </b>Specifies the location of the NET-SNMP
1168 <i>lib </i>directory. <br>
1169 <b>Default Value: </b>Not Set<br>
1170 <b>Recommended Value (Development Build): </b>
1171 No Specific Recommendation<br>
1172 <b>Recommended Value (Release Build): </b>
1173 No Specific Recommendation<br>
1174 <b>Required: </b>No. By default, the NET-SNMP library is
|
1175 kumpf 1.12 expected to be installed in a directory that is searched by
1176 default (e.g., /usr/lib, /usr/lib64). For platforms where
|
1177 denise.eckstein 1.1 this isn't true, the PEGASUS_NET_SNMP_LIB_DIR environment
1178 variable may be used to define an alternative path. This
1179 environment variable is only used if PEGASUS_USE_NET_SNMP is set.
1180 </ul>
1181
1182
1183 <h5>PEGASUS_NOASSERTS</h5>
1184 <ul>
1185 <b>Description: </b>Defines the NDEBUG compilation macro, which
|
1186 marek 1.37 causes the preprocessor to remove PEGASUS_ASSERT() and disables assertion
1187 on PEGASUS_FCT_EXECUTE_AND_ASSERT statements.<br>
|
1188 denise.eckstein 1.1 <b>Default Value: </b>Not Set<br>
1189 <b>Recommended Value (Development Build): </b>Not Set<br>
1190 <b>Recommended Value (Release Build): </b>Set<br>
1191 <b>Required: </b>No<br>
1192 </ul>
1193
1194 <h5>PEGASUS_OPENSLP_HOME</h5>
1195 <ul>
|
1196 kumpf 1.12 <b>Description: </b>Specifies the location of the OpenSLP
|
1197 denise.eckstein 1.1 SDK directory. This directory must contain the OpenSLP
1198 <i>include</i> directory, $(PEGASUS_OPENSLP_HOME)/include,
1199 and the OpenSLP <i>library</i> directory,
1200 $(PEGASUS_OPENSLP_HOME)/lib.<br>
1201 <b>Default Value: </b>Not Set<br>
1202 <b>Recommended Value (Development Build): </b>
1203 No Specific Recommendation<br>
1204 <b>Recommended Value (Release Build): </b>
1205 No Specific Recommendation<br>
1206 <b>Required: </b>No. If not set, no additional include or
1207 library search paths will be included.
1208 <b>Considerations: </b>This value is not used if PEGASUS_USE_OPENSLP
1209 is not defined. <br>
1210 </ul>
1211
1212 <h5>PEGASUS_PAM_AUTHENTICATION</h5>
1213 <ul>
|
1214 kumpf 1.12 <b>Description: </b>Enables support for PAM-(Pluggable
|
1215 denise.eckstein 1.1 Authentication Modules) based authentication.<br>
1216 <b>Default Value: </b>Not Set<br>
1217 <b>Recommended Value (Development Build): </b>Set<br>
1218 <b>Recommended Value (Release Build): </b>Set<br>
1219 <b>Required: </b>No<br>
1220 <b>Considerations: </b>Support for PAM in OpenPegasus is
1221 dependent on platform support for PAM.<br>
1222 </ul>
1223
|
1224 marek 1.41 <h5>PEGASUS_PAM_SESSION_SECURITY</h5>
1225 <ul>
1226 <b>Description: </b>Enables support for PAM-(Pluggable
1227 Authentication Modules) based authentication and authorization.<br>
1228 When choosing this PAM method the PAM session started through pam_start
1229 is kept open for the complete CIM request.
1230 The PAM item PAM_RHOST will be set to the connection IP address.
1231 This allows PAM modules to restrict number of concurrent connections
1232 from a single host.<br>
1233 If PEGASUS_PAM_SESSION_SECURITY is set, you cannot enable the Privilege
1234 Separation feature (PEGASUS_ENABLE_PRIVILEGE_SEPARATION) or the
1235 authentication-only PAM mechanism (PEGASUS_PAM_AUTHENTICATION).<br>
1236 <b>Default Value: </b>Not Set<br>
1237 <b>Recommended Value (Development Build): </b>Not Set<br>
1238 <b>Recommended Value (Release Build): </b>Not Set<br>
1239 <b>Required: </b>No<br>
1240 <b>Considerations: </b>Support for PAM in OpenPegasus is
1241 dependent on platform support for PAM.<br>
1242 </ul>
1243
|
1244 denise.eckstein 1.1 <h5>PEGASUS_PLATFORM</h5>
1245 <ul>
1246 <b>Description: </b>Describes the target platform for the
|
1247 kumpf 1.12 build. The list of supported values for this variable
1248 is defined in pegasus/mak/config.mak. Please refer to
|
1249 denise.eckstein 1.1 that file for a complete list of valid PEGASUS_PLATFORM
1250 values. This document includes platform-specific configuration
|
1251 kumpf 1.12 data for only a subset of the supported platforms. The
|
1252 denise.eckstein 1.1 following table describes the platforms documented in
1253 this version of the document. <br>
1254 <b>Default Value: </b>None<p> </p>
|
1255 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="542">
1256 <tbody><tr>
1257 <th bgcolor="#cae6ca" width="190">Platform</th>
1258 <th bgcolor="#cae6ca" width="351">Recommended Value <br>
|
1259 denise.eckstein 1.1 Development Build</th>
|
1260 karl 1.29 <th bgcolor="#cae6ca" width="338">Recommended Value <br>
|
1261 denise.eckstein 1.1 Release Build</th>
1262 </tr>
1263 <tr align="center">
|
1264 karl 1.29 <td align="left" width="190">Linux IA32</td>
|
1265 denise.eckstein 1.1 <td width="351">LINUX_IX86_GNU</td>
1266 <td width="338">LINUX_IX86_GNU</td>
1267 </tr>
1268 <tr align="center">
|
1269 karl 1.29 <td align="left" width="190">Linux IA64</td>
|
1270 denise.eckstein 1.1 <td width="351">LINUX_IA64_GNU</td>
1271 <td width="338">LINUX_IA64_GNU</td>
1272 </tr>
1273 <tr align="center">
|
1274 karl 1.29 <td align="left" width="190">Linux X86_64</td>
|
1275 denise.eckstein 1.1 <td width="351">LINUX_X86_64_GNU</td>
1276 <td width="338">LINUX_X86_64_GNU</td>
1277 </tr>
1278 <tr align="center">
|
1279 karl 1.29 <td align="left" width="190">HP-UX PA-RISC</td>
|
1280 denise.eckstein 1.1 <td width="351">HPUX_PARISC_ACC</td>
1281 <td width="338">HPUX_PARISC_ACC</td>
1282 </tr>
1283 <tr align="center">
|
1284 karl 1.29 <td align="left" width="190">HP-UX IPF</td>
|
1285 denise.eckstein 1.1 <td width="351">HPUX_IA64_ACC</td>
1286 <td width="338">HPUX_IA64_ACC</td>
1287 </tr>
1288 <tr align="center">
|
1289 karl 1.29 <td align="left" width="190">OpenVMS Alpha</td>
|
1290 denise.eckstein 1.1 <td width="351">VMS_ALPHA_DECCXX</td>
1291 <td width="338">VMS_ALPHA_DECCXX</td>
1292 </tr>
1293 <tr align="center">
|
1294 karl 1.29 <td align="left" width="190">OpenVMS IA64</td>
|
1295 denise.eckstein 1.1 <td width="351">VMS_IA64_DECCXX</td>
1296 <td width="338"> VMS_IA64_DECCXX</td>
1297 </tr>
|
1298 karl 1.29 </tbody></table>
|
1299 denise.eckstein 1.1 <br><br>
1300 <b>Required: </b>Yes<br>
|
1301 kumpf 1.12 <b>Considerations: </b>The error "PEGASUS_PLATFORM
1302 environment variable undefined." is returned if the
|
1303 denise.eckstein 1.1 PEGASUS_PLATFORM environment variable is not set.
1304 </ul>
1305
1306 <h5>PEGASUS_REMOVE_METHODTRACE</h5>
1307 <ul>
1308 <b>Description: </b>If true, the CIM Server is compiled without
1309 method enter and exit trace statements. Trace Level 5 will
1310 continue to be accepted as a valid trace level but, without the
1311 method enter and exit trace statements, it will be equivalent to
|
1312 kumpf 1.12 Trace Level 4. If PEGASUS_REMOVE_METHODTRACE is false or not set,
|
1313 denise.eckstein 1.1 method enter and exit trace statements are included. All
1314 other values are considered invalid and will result in a build
1315 error.<br>
1316 <b>Default Value: </b>Not Set<br>
1317 <b>Recommended Value (Development Build): </b>Not Set (The
1318 Considerations section gives guidance on when a different
1319 decision would be made.)<br>
1320 <b>Recommended Value (Release Build): </b>Not Set (The
1321 Considerations section gives guidance on when a different
1322 decision would be made.)<br>
1323 <b>Required: </b>No<br>
1324 <b>Considerations: </b>This option completely removes the
|
1325 kumpf 1.12 method enter/exit trace statements from the generated object code.
1326 It defines the PEG_METHOD_ENTER and PEG_METHOD_EXIT macros
|
1327 denise.eckstein 1.1 to null statements. This helps to keep static code size small
1328 but reduces the serviceability of the CIM server.<br>
1329 </ul>
1330
1331
1332 <h5>PEGASUS_REPOSITORY_MODE</h5>
1333 <ul>
1334 <b>Description: </b>This variable defines the default mode
1335 used to create repositories that are constructed as part of the
1336 automated build tests. It does not affect the runtime
1337 environment. Valid values include: XML (causes
1338 the repository to be built in XML mode); BIN (causes
|
1339 kumpf 1.12 the repository to be built in binary mode). Use cimconfig to
|
1340 denise.eckstein 1.1 modify the runtime environment.<br>
1341 <b>Default Value: </b>XML<br>
1342 <b>Recommended Value (Development Build): </b>XML<br>
1343 <b>Recommended Value (Release Build): </b>XML<br>
1344 <b>Required: </b>No<p> </p>
1345 </ul>
1346
|
1347 kumpf 1.2 <h5>PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES</h5>
1348 <ul>
1349 <b>Description: </b>This variable defines the default contents of a
1350 class definition in the repository store when a new repository is created.
1351 Specifically, when set to true, propagated elements are included in a
1352 class definition in the persistent store. The contents of a class
1353 definition returned from the repository interface is not affected by this
1354 option.<br>
1355 <b>Default Value: </b>false<br>
1356 <b>Recommended Value (Development Build): </b>false<br>
1357 <b>Recommended Value (Release Build): </b>false<br>
1358 <b>Required: </b>No<p> </p>
1359 <b>Considerations: </b>A repository which stores complete class
1360 definitions does not allow modifications to non-leaf classes or changes
1361 to a superclass designation. Complete classes use more storage space,
1362 often twice as much as local (incomplete) classes. Class retrieval may
1363 be more expensive when local classes are stored. No specific mechanism
1364 is available to change this setting in an existing repository.<br>
1365 </ul>
1366
|
1367 denise.eckstein 1.1 <h5>PEGASUS_SLP_REG_TIMEOUT</h5>
1368 <ul>
1369 <b>Description: </b>Most SLP implementations allow a lifetime
1370 value to be specified in the registration sent to the SLP SA or
1371 DA. The PEGASUS_SLP_REG_TIMEOUT build variable allows a lifetime
1372 (ie. timeout) value to be specified on the SLP registration, with
1373 a 're-registration' being sent to SLP at the same specified
1374 timeout interval. The purpose of this lifetime or timeout value
|
1375 kumpf 1.12 is to avoid the accumulation of stale service information
|
1376 denise.eckstein 1.1 in the SA or DA.<br>
1377 <b>Default Value: </b>Undefined<br>
1378 <b>Recommended Value (Development Build): </b>Undefined<br>
1379 <b>Recommended Value (Release Build): </b>Undefined<br>
1380 <b>Required: </b>No<p><b>Example: </b>
1381 PEGASUS_SLP_REG_TIME=1440 (ie. 24 hours or 1 day)<br>
1382 <b>Considerations: </b>(1) The OpenPegasus internal SLP
1383 implementation does not support timeout registrations. This
1384 build option is useful, for example, if PEGASUS_USE_OPENSLP is
|
1385 kumpf 1.12 defined. (2) Some SLP implementations may impose a
|
1386 denise.eckstein 1.1 maximum value for the lifetime parameter. For example, OpenSLP
|
1387 kumpf 1.12 limits this value to SLP_LIFETIME_MAXIMUM (or 0xFFFF), and
|
1388 denise.eckstein 1.1 if this maximum value is passed to OpenSLP, then the timeout
1389 feature is disabled. Refer to the documentation of your SLP
1390 implementation for more information. (3) OpenPegasus will not
|
1391 kumpf 1.12 do any validity checking on the specified value, either
|
1392 denise.eckstein 1.1 to determine if it is a valid positive integer or if it
1393 exceeds some maximum value.<br>
|
1394 karl 1.29 </p></ul>
|
1395 denise.eckstein 1.1
1396 <h5>PEGASUS_SNIA_EXTENSIONS</h5>
1397 <ul>
1398 <b>Description: </b> This variable is used to enable a
1399 set of workarounds that support the use of OpenPegasus
1400 in the SNIA Test Environment.<br>
1401 <b>Default Value: </b>Not Set<br>
1402 <b>Recommended Value (Development Build): </b>Not Set<br>
1403 <b>Recommended Value (Release Build): </b>Not Set<br>
1404 <b>Required: </b>No<br>
1405 <b>Considerations: </b>The functionality enabled with this
1406 variable is experimental and subject to change.
1407 </ul>
1408
1409 <h5>PEGASUS_SKIP_MOST_TEST_DIRS</h5>
1410 <ul>
1411 <b>Description: </b>If set to true, this variable can be used
1412 to reduce the time required to build OpenPegasus by significantly
1413 reducing the number of tests that are built.<br>
1414 <b>Default Value: </b>Not Set<br>
1415 <b>Recommended Value (Development Build): </b>Not Set<br>
1416 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
1417 <b>Required: </b>No<br>
1418 <b>Considerations: </b>Setting this variable to true
1419 affects the behavior of all recursive make targets (e.g.,
1420 clean, depend, all, unittests, alltests, and slptests).
1421 Use of this variable with test-related targets (e.g., unittests,
|
1422 kumpf 1.12 alltests and slptests) can produce unexpected results.
|
1423 denise.eckstein 1.1 To avoid creating an inconsistent PEGASUS_HOME directory,
1424 the PEGASUS_HOME directory (i.e., the OpenPegasus build
1425 directory) should be removed prior to enabling or disabling
1426 this variable. This variable should not be used to characterize
|
1427 kumpf 1.12 the set of files to be packaged in a release build. Please
|
1428 denise.eckstein 1.1 refer to the Runtime Packaging Definition PEP for the release
|
1429 kumpf 1.12 for a recommended list of files to be included in a release.
|
1430 denise.eckstein 1.1 </ul>
1431
1432 <h5>PEGASUS_TEST_ENABLE_DEBUG_TRACE</h5>
1433 <ul>
1434 <b>Description: </b>
1435 This variable is only used for testing. If set to true,
|
1436 kumpf 1.12 Discarded data trace will be enabled by the install_run
1437 target of the src/Server/Makefile before running the
|
1438 denise.eckstein 1.1 OpenPegasus TestMakefile test suite. <br>
1439 <b>Default Value: </b>Not Set<br>
1440 <b>Recommended Value (Development Build): </b>Set<br>
1441 <b>Recommended Value (Release Build): </b>Not Set<br>
1442 <b>Required: </b>No<br>
1443 <b>Considerations: </b>
|
1444 kumpf 1.12 This variable is useful in certain test environments to
1445 explicitly enable tracing to aid in better troubleshooting and
|
1446 denise.eckstein 1.1 detection of test failures (E.g. Test systems are experiencing
|
1447 kumpf 1.12 test failures due to connection timeouts, lost indications
|
1448 denise.eckstein 1.1 etc).<br>
1449 </ul>
1450
1451 <h5>PEGASUS_TEST_ISGROUP_GROUP/PEGASUS_TEST_ISGROUP_USER_SUCCESS/PEGASUS_TEST_ISGROUP_USER_FAILURE</h5>
1452 <ul>
|
1453 kumpf 1.12 <b>Description: </b>These variables are only used for testing.
|
1454 denise.eckstein 1.1 These variables allow the developer to define a valid group name,
1455 PEGASUS_TEST_ISGROUP_GROUP, a valid user name that is in the
1456 group, PEGASUS_TEST_ISGROUP_USER_SUCCESS, and an a valid user
1457 name that is not in the group, PEGASUS_TEST_ISGROUP_USER_FAILURE.
|
1458 kumpf 1.12 These variables are only used for testing and NOT part of the
|
1459 denise.eckstein 1.1 release.<br>
|
1460 kumpf 1.12 <b>Default Value(Windows):</b>
|
1461 denise.eckstein 1.1 Administrator/Administrators/Guest<br>
1462 <b>Default Value(Non-Windows): </b>root/root/guest<br>
1463 <b>Recommended Value (Development Build): </b>
1464 No Recommendation<br>
1465 <b>Recommended Value (Release Build): </b>Not Used<br>
1466 <b>Required: </b>No
1467 </ul>
1468
1469 <h5>PEGASUS_TEST_IPV6</h5>
1470 <ul>
1471 <b>Description: </b>This variable is only used for
1472 testing. If set to true, the IPv6-specific tests will
|
1473 karl 1.29 be run as part of the "alltests" OpenPegasus
|
1474 denise.eckstein 1.1 TestMakefile test suite. If this variable is not set or set to
1475 false, the IPv6-specific tests will not be run. All
1476 other values are invalid.<br>
|
1477 kumpf 1.12 <b>Default Value: </b>If PEGASUS_TEST_IPV6 is not defined,
|
1478 denise.eckstein 1.1 PEGASUS_TEST_IPV6 is set to the value of PEGASUS_ENABLE_IPV6.<br>
1479 <b>Recommended Value (Development Build): </b>Set to the value
1480 of PEGASUS_ENABLE_IPV6<br>
1481 <b>Recommended Value (Release Build): </b>Not Used<br>
1482 <b>Required: </b>No<br>
|
1483 kumpf 1.12 <b>Considerations: </b>This variable is useful in certain
|
1484 denise.eckstein 1.1 test environments to explicitly disable running the IPv6
|
1485 kumpf 1.12 tests (e.g., when running an IPv6-enabled version of
|
1486 denise.eckstein 1.1 OpenPegasus on an an IPv4 system).<br>
1487 </ul>
1488
1489 <h5>PEGASUS_TEST_SDK</h5>
1490 <ul>
|
1491 kumpf 1.12 <b>Description: </b>This variable is only used for
|
1492 denise.eckstein 1.1 testing. It is used to control testing of the SDK
1493 sample providers and clients. If set, the setup, building and
|
1494 kumpf 1.12 testing of the SDK samples is enabled as part of the
|
1495 denise.eckstein 1.1 OpenPegasus automated build and test.<br>
1496 <b>Default Value: </b>Not Set<br>
1497 <b>Recommended Value (Development Build): </b>Set<br>
1498 <b>Recommended Value (Release Build): </b>Not Used<br>
1499 <b>Required: </b>No
1500 </ul>
1501
1502 <h5>PEGASUS_TEST_USER_DEFINED</h5>
1503 <ul>
1504 <b>Description: </b>This variable is only used for testing.
1505 If this variable is set, the tests will assume that the
1506 PEGASUS_TEST_USER_ID and PEGASUS_TEST_USER_PASS variables
|
1507 kumpf 1.12 defines a valid user/password pair and can be used for
|
1508 denise.eckstein 1.1 certificate-based authentication testing. These tests
|
1509 karl 1.29 also assumes that "invalidUser" is not a valid
|
1510 denise.eckstein 1.1 user.<br>
1511 <b>Default Value: </b>Not Set<br>
1512 <b>Recommended Value (Development Build): </b>Set<br>
1513 <b>Recommended Value (Release Build): </b>Not Used<br>
1514 <b>Required: </b>No
1515 </ul>
1516
1517 <h5>PEGASUS_TEST_USER_ID/PEGASUS_TEST_USER_PASS</h5>
1518 <ul>
1519 <b>Description: </b>These variables are only used for
1520 testing. These variables allow the developer to define a
1521 valid, non-privileged user name and password
1522 on the test system that can be used as part of the OpenPegasus
1523 automated test scripts to perform authentication and
1524 authorization testing. These variables are only used for
1525 testing and NOT part of the release.<br>
1526 <b>Default Value: </b>guest/guest<br>
1527 <b>Recommended Value (Development Build): </b>
1528 No Recommendation<br>
1529 <b>Recommended Value (Release Build): </b>Not Used<br>
1530 <b>Required: </b>No<br>
1531 denise.eckstein 1.1 </ul>
1532
1533 <h5>PEGASUS_TEST_VALGRIND_LOG_DIR</h5>
1534 <ul>
1535 <b>Description: </b>
1536 This variable is currently only supported on Linux. It may be
|
1537 kumpf 1.12 set to run regression tests under the
|
1538 denise.eckstein 1.1 <a href="http://www.valgrind.org/">Valgrind</a> memory
1539 checking tool. It must specify a directory for writing
1540 Valgrind log files. The file name format for a particular
1541 log is PEGASUS_TEST_VALGRIND_LOG_DIR/PROGRAM_NAME.pid.<br>
1542 <b>Default Value: </b>Not Set<br>
1543 <b>Recommended Value (Development Build): </b>Not Set<br>
1544 <b>Recommended Value (Release Build): </b>Not Set<br>
1545 <b>Required: </b>No<br>
1546 <b>Considerations: </b>This flag is only supported on Linux to
1547 enable running tests under Valgrind.<br>
1548 </ul>
1549
1550 <h5>PEGASUS_TMP</h5>
1551 <ul>
1552 <b>Description: </b>This variable is only used in a test
1553 environment. It can be used to define the directory that
1554 OpenPegasus test programs should use to store temporary files.<br>
1555 <b>Default Value: </b>"."<br>
1556 <b>Recommended Value (Development Build): </b>
1557 No Specific Recommendation<br>
1558 <b>Recommended Value (Release Build): </b>Not Used<br>
1559 denise.eckstein 1.1 <b>Required: </b>No<br>
1560 </ul>
1561
1562 <h5>PEGASUS_USE_DEBUG_BUILD_OPTIONS</h5>
1563 <ul>
1564 <b>Description: </b>The PEGASUS_DEBUG flag is used to control
1565 a variety of settings, including compile options, assertion
|
1566 kumpf 1.12 enablement, method definitions for testing, and diagnostic
|
1567 denise.eckstein 1.1 output. The PEGASUS_USE_DEBUG_BUILD_OPTIONS variable
|
1568 kumpf 1.12 can be used to enable just the compiler specific debug options
|
1569 denise.eckstein 1.1 (e.g., -g in g++) .<br>
1570 <b>Default Value: </b>Not Set<br>
1571 <b>Recommended Value (Development Build): </b>Set<br>
1572 <b>Recommended Value (Release Build): </b>Not Set<br>
1573 <b>Required: </b>No<br>
1574 <b>Considerations: </b>This variable is automatically set
1575 if PEGASUS_DEBUG is set.<br>
1576 </ul>
1577
1578 <h5>PEGASUS_USE_EMANATE</h5>
1579 <ul>
1580 <b>Description: </b>EMANATE,
1581 <a href="http://www.snmp.com/products/emanate.html">
|
1582 kumpf 1.12 http://www.snmp.com/products/emanate.html</a>, is an SNMP Research
1583 International product that supports SNMPv1, SNMPv2c, and
|
1584 denise.eckstein 1.1 SNMPv3. If the PEGASUS_USE_EMANATE variable is defined,
1585 the OpenPegasus SNMP Handler will use the EMANATE libraries
|
1586 kumpf 1.12 to send traps to the SNMP Management application.
|
1587 denise.eckstein 1.1 The EMANATE libraries are NOT included as part of OpenPegasus.<br>
1588 <b>Default Value: </b>Not Set<br>
1589 <b>Recommended Value (Development Build): </b>Not Set<br>
1590 <b>Recommended Value (Release Build): </b>Not Set<br>
1591 <b>Required: </b>No<p>
1592 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
|
1593 kumpf 1.12 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1594 denise.eckstein 1.1 Handler to be supported.<br>
|
1595 karl 1.29 </p></ul>
|
1596 denise.eckstein 1.1
1597
1598 <h5>PEGASUS_USE_NET_SNMP</h5>
1599 <ul>
|
1600 kumpf 1.12 <b>Description: </b>NET-SNMP,
|
1601 denise.eckstein 1.1 <a href="http://net-snmp.sourceforge.net">
1602 http://net-snmp.sourceforge.net</a>, is an OSS
1603 implementation of a suite of applications used to implement
1604 <a href="http://www.ietf.org/rfc/rfc1157.txt">SNMP v1</a>,
1605 <a href="http://www.ietf.org/rfc/rfc1901.txt">SNMP v2c</a> and
1606 <a href="http://www.ietf.org/rfc/rfc2571.txt">SNMP v3</a> using
|
1607 kumpf 1.12 both IPv4 and IPv6. If the PEGASUS_USE_NET_SNMP
|
1608 denise.eckstein 1.1 variable is defined, the OpenPegasus SNMP Handler will use
1609 the NET-SNMP libraries to send traps to the SNMP Management
1610 application. The NET-SNMP libraries are NOT included
1611 as part of OpenPegasus.<br>
1612 <b>Default Value: </b>Not Set<br>
1613 <b>Recommended Value (Development Build): </b>Not Set<br>
|
1614 kumpf 1.12 <b>Recommended Value (Release Build): </b>true for Linux,
|
1615 denise.eckstein 1.1 false for all other platforms<br>
1616 <b>Required: </b>No<p>
|
1617 kumpf 1.12 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1618 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1619 denise.eckstein 1.1 Handler to be supported.<br>
|
1620 karl 1.29 </p></ul>
|
1621 denise.eckstein 1.1
|
1622 sahana.prabhakar 1.23 <h5>PEGASUS_ENABLE_NET_SNMPV3</h5>
1623 <ul>
1624 <b>Description: </b>If this variable is defined,
1625 then OpenPegasus SNMP Handler will build the SNMPV3
1626 features. This should be set to false if NET-SNMP 5.2 and lower
1627 libraries are used.<br>
1628 <b>Default Value: </b>true<br>
1629 <b>Recommended Value (Development Build): </b>true<br>
1630 <b>Recommended Value (Release Build): </b>true<br>
1631 <b>Required: </b>No<p>
1632 <b>Considerations: </b>PEGASUS_USE_NET_SNMP variable must
1633 be set.<br>
|
1634 karl 1.29 </p></ul>
|
1635 sahana.prabhakar 1.23
1636
|
1637 denise.eckstein 1.1 <h5>PEGASUS_USE_OPENSLP</h5>
1638 <ul>
1639 <b>Description: </b>OpenSLP, <a href="http://www.openslp.org">
|
1640 kumpf 1.12 http://openslp.org</a>, is an open-source implementation of
|
1641 denise.eckstein 1.1 Service Location Protocol. If the PEGASUS_USE_OPENSLP variable
1642 is defined, OpenPegasus will be built to use the OpenSLP
1643 implementation of SLP instead of the internal OpenPegasus
1644 implementation of SLP. The OpenSLP libaries are NOT included
1645 as part of OpenPegasus.
1646 <b>Default Value: </b>Not Set<br>
1647 <b>Recommended Value (Development Build): </b>Not Set<br>
1648 <b>Recommended Value (Release Build): </b>Not Set<br>
1649 <b>Required: </b>No<br>
1650 <b>Considerations: </b>PEGASUS_ENABLE_SLP must be defined
1651 if this variable is set.
1652 </ul>
1653
1654 <h5>PEGASUS_USE_PAM_STANDALONE_PROC</h5>
1655 <ul>
1656 <b>Description: </b>Moves the processing of PAM requests from
1657 the CIM Server process to a separate process managed by the
1658 CIM Server.<br>
1659 <b>Default Value: </b>Not Set<br>
1660 <b>Recommended Value (Development Build): </b>Set<br>
1661 <b>Recommended Value (Release Build): </b>Set<br>
1662 denise.eckstein 1.1 <b>Required: </b>No<br>
1663 <b>Considerations: </b>If PAM Authentication is enabled,
1664 the PAM API is used, during the processing of each request, to
1665 authenticate the client. This level of use makes the CIM Server
1666 extremely sensitive to memory leaks in the PAM library. In
1667 addition, certain PAM modules are not thread-safe. If your
|
1668 kumpf 1.12 platform is experiencing problems with PAM Authentication,
|
1669 denise.eckstein 1.1 use of option may provide a work-around.
1670 PEGASUS_USE_PAM_STANDALONE_PROC requires
1671 PEGASUS_PAM_AUTHENTICATION to be set.<br>
1672 </ul>
1673
1674 <h5>PEGASUS_USE_RELEASE_CONFIG_OPTIONS</h5>
1675 <ul>
1676 <b>Description: </b>If set, OpenPegasus is built using
1677 the "Release Build" configuration options. By default,
|
1678 karl 1.29 OpenPegasus is built using the "Development Build"
|
1679 denise.eckstein 1.1 configuration options.<br>
|
1680 s.kodali 1.19 <b>Default Value: </b>false<br>
1681 <b>Recommended Value (Development Build): </b>false<br>
1682 <b>Recommended Value (Release Build): </b>true<br>
|
1683 denise.eckstein 1.1 <b>Required: </b>No<br>
|
1684 kumpf 1.12 <b>Considerations: </b>(1)The
1685 PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a platform
|
1686 denise.eckstein 1.1 vendor to easily toggle between two sets of configurations
1687 options, a set of options tuned for the development/debug
|
1688 karl 1.29 ("Development Build") environment and a set of options
|
1689 denise.eckstein 1.1 tuned for the production environment ("Release Build").
|
1690 kumpf 1.12 Refer the section titled "Configuration Properties" for
1691 additional detail. (2) For each configuration
|
1692 karl 1.29 variable, the "Recommended Value (Release Build)"
|
1693 kumpf 1.12 value defines the recommended settings to use for a
|
1694 karl 1.29 "Release Build". Please refer to the
|
1695 denise.eckstein 1.1 description of each variable for additional information.
1696 </ul>
1697
1698 <h5>PEGASUS_USE_RELEASE_DIRS</h5>
1699 <ul>
|
1700 kumpf 1.12 <b>Description: </b>If set, OpenPegasus is built using
1701 the "Release Build" directory definitions. By default,
|
1702 karl 1.29 OpenPegasus is built using the "Development Build"
|
1703 denise.eckstein 1.1 directory definitions.<br>
1704 <b>Default Value: </b>Not Set<br>
1705 <b>Recommended Value (Development Build): </b>Not Set<br>
1706 <b>Recommended Value (Release Build): </b>Set<br>
1707 <b>Required: </b>No<br>
|
1708 kumpf 1.12 <b>Considerations: </b>
|
1709 denise.eckstein 1.1 The PEGASUS_USE_RELEASE_DIRS variable allows a platform
|
1710 kumpf 1.12 vendor to easily toggle between two sets of directory
1711 definitions, a set tuned for the development/debug
|
1712 karl 1.29 ("Development Build") environment and a set tuned for the
|
1713 kumpf 1.12 production environment ("Release Build"). Refer the section
|
1714 denise.eckstein 1.1 titled "Configuration Properties" for additional detail.<br>
1715 </ul>
1716
|
1717 s.kodali 1.18 <h5>PEGASUS_FLAVOR</h5>
1718 <ul>
1719 <b>Description: </b> This variable is used for configuring Multi CIMOM
1720 on same OS by eliminating single point for storage of PID's and configuration
1721 files. Flavor is used in structuring the release dirs,configuration file names,
1722 log identity and PAM config file.
1723 If set, OpenPegasus is built using the flavor value. By default OpenPegasus is
1724 built using "tog" as the flavor. RPMs are named using the flavor value.
1725 <br>
1726 <b>Default Value: </b>tog<br>
1727 <b>Recommended Value (Development Build): </b>tog<br>
1728 <b>Recommended Value (Release Build): </b>tog<br>
1729 <b>Required: </b>No<br>
1730 <b>Considerations: </b>
1731 To build RPM using flavor, RPM spec file needs to be regenerated after setting the flavor value.
1732 This can be done using the create_OpenPegasusRPMSpecFile target in the Makefile.Release.
1733 Platforms have to define their own release dir structure using the flavor for release builds.
1734 An error will be reported if both PEGASUS_FLAVOR and PEGASUS_USE_RELEASE_DIRS are set and
1735 PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS is not set.
1736 RPM build on linux defines PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS by default.
1737 <br>
1738 s.kodali 1.18 </ul>
1739
|
1740 s.kodali 1.22 <h5>PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT</h5>
1741 <ul>
1742 <b>Description: </b> Builds the Pegasus with 32-bit provider support for the specified platform.
1743 If this option is set, the value MUST be one of the 32-bit supported platforms by Pegasus.
1744 <br>
1745 <b>Default Value: </b>Not set<br>
1746 <b>Recommended Value (Development Build): </b>Not set<br>
1747 <b>Recommended Value (Release Build): </b>Not set<br>
1748 <b>Required: </b>No<br>
1749 <b>Considerations: </b>
1750 This option is used to run the 32-bit providers under 64-bit CIMserver.
1751 To register the 32-bit providers, register the provider module by setting the
1752 Bitness property value to "2". 32-bit Providers are always loaded out of process
1753 irrespective of forceProviderProcesses config option.
1754 <br>
1755 </ul>
1756
|
1757 kumpf 1.6 <h5>PEGASUS_USE_SQLITE_REPOSITORY</h5>
1758 <ul>
1759 <b>Description: </b>If true, new repository stores are created
1760 using a SQLite database. Existing file-based stores will continue
1761 to be recognized and operate seamlessly.<br>
1762 <b>Default Value: </b>false<br>
1763 <b>Recommended Value (Development Build): </b>true<br>
1764 <b>Recommended Value (Release Build): </b>true<br>
1765 <b>Required: </b>No<br>
1766 <b>Considerations: </b>If PEGASUS_USE_SQLITE_REPOSITORY is set to true
1767 and SQLite files are not installed in default search locations,
1768 SQLITE_HOME must also be configured.
1769 PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES may not be set to true when
1770 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1771 </ul>
1772
|
1773 denise.eckstein 1.1 <h5>PEGASUS_USE_SYSLOGS</h5>
1774 <ul>
1775 <b>Description: </b>If set, OpenPegasus will be built
1776 to send log messages to the system logger (syslog).
1777 Otherwise, log messages will be sent to OpenPegasus
1778 specific log files.<br>
1779 <b>Recommended Value (Development Build): </b>Set<br>
1780 <b>Recommended Value (Release Build): </b>Set<br>
1781 <b>Required: </b>No<br>
1782 <b>Considerations: </b>This variable is currently
1783 not implemented as an environment variable. To use
1784 the option -DPEGASUS_USE_SYSLOGS must
1785 be explicitly included in the appropriate platform
1786 makefile (pegasus/mak/platform_*.mak).</ul>
1787
1788 <h5>PEGASUS_WINDOWS_SDK_HOME</h5>
1789 <ul>
|
1790 kumpf 1.12 <b>Description: </b>This variable should be set to point
1791 to the Microsoft Platform SDK on Windows if using a compiler
|
1792 denise.eckstein 1.1 version < 1300 (i.e. VC6). If using VC7 or VC8, this flag
1793 does not need to be set, as the necessary libraries are already
1794 included.<br>
1795 <b>Recommended Value (Development Build): </b>
1796 No Specific Recommendation<br>
1797 <b>Recommended Value (Release Build): </b>
1798 No Specific Recommendation<br>
1799 <b>Required: </b>Yes, if building on Windows with a
1800 compiler version < 1300.<br>
1801 </ul>
1802
|
1803 kumpf 1.6 <h5>SQLITE_HOME</h5>
1804 <ul>
1805 <b>Description: </b>Specifies the location of the SQLite SDK directory.
1806 This directory must contain sqlite3.h in the $(SQLITE_HOME)/include
1807 directory, and libsqlite3 in the $(SQLITE_HOME)/lib directory.<br>
1808 <b>Default Value: </b>Not Set<br>
1809 <b>Recommended Value (Development Build): </b>
1810 No Specific Recommendation<br>
1811 <b>Recommended Value (Release Build): </b>
1812 No Specific Recommendation<br>
1813 <b>Required: </b>Yes, if PEGASUS_USE_SQLITE_REPOSITORY is set to true
1814 and the SQLite files are not installed in locations that are searched by
1815 default.<br>
1816 <b>Considerations: </b>This environment variable is only used if
1817 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1818 </ul>
1819
|
1820 marek 1.24 <h5>PEGASUS_INITIAL_THREADSTACK_SIZE</h5>
1821 <ul>
1822 <b>Description: </b>This environment variable sets the initial size
1823 of the stack on new threads. Value is specified in number of bytes.<br>
1824 <b>Default Value: </b>262144<br>
1825 <b>Recommended Value (Development Build): </b>262144<br>
1826 <b>Recommended Value (Release Build): </b>262144<br>
|
1827 karl 1.29 <b>Required: </b>No <p></p>
|
1828 marek 1.24 </ul>
1829
|
1830 denise.eckstein 1.1 <h4>Examples Building a Linux IA32 (#IA64) Development/Debug Version</h4>
1831 <ul>
1832 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
|
1833 kumpf 1.12 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
|
1834 denise.eckstein 1.1 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
|
1835 kumpf 1.12 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1836 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1837 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
|
1838 kumpf 1.12 export PEGASUS_HAS_SSL=yes<br>
|
1839 denise.eckstein 1.1 export PEGASUS_DEBUG=TRUE<br>
1840 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
|
1841 kumpf 1.12 export PEGASUS_USE_SYSLOGS=true<br>
|
1842 denise.eckstein 1.1 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1843 </ul>
1844
1845 <h4>Building a Linux IA32 (#IA64) Production Release Version</h4>
1846 <ul>
1847 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1848 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1849 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1850 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
|
1851 kumpf 1.16 export PEGASUS_ENABLE_CQL=false<br>
1852 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1853 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1854 export PEGASUS_HAS_SSL=yes<br>
1855 export PEGASUS_USE_RELEASE_CONFIG_OPTIONS=true<br>
|
1856 kumpf 1.12 export PEGASUS_USE_RELEASE_DIRS=true<br>
|
1857 denise.eckstein 1.1 export PEGASUS_NOASSERTS=true<br>
1858 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1859 export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true<br>
1860 export PEGASUS_USE_SYSLOGS=true<br>
1861 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1862 </ul>
1863
1864 <h3>Environment Variable Settings for <u>Running</u> OpenPegasus</h3>
1865
1866 <h4>Definitions</h4>
1867
1868 <h5>PEGASUS_HOME</h5>
1869 <ul>
|
1870 kumpf 1.12 <b>Description: </b>There are multiple options for
|
1871 denise.eckstein 1.1 configuring the location of OpenPegasus runtime
|
1872 kumpf 1.12 files (e.g., configuration files, libraries,
|
1873 denise.eckstein 1.1 repository, executables). If no other option is
1874 specified, OpenPegasus will attempt to use the value
1875 PEGASUS_HOME.<br>
1876 <b>Default Value: </b>"."<br>
1877 <b>Recommended Value (Development Build): </b>
1878 The same value defined at build time.<br>
1879 <b>Recommended Value (Release Build): </b>Not Set<br>
1880 <b>Required: </b>No<br>
1881 <b>Considerations: </b>Although this variable can be
1882 useful in a development environment use of this environment
1883 variable is not recommended in a production environment.
1884 Instead, the use of configuration properties to explicitly
1885 set the location of runtime files and directories is recommended.
1886 </ul>
1887
1888 <h5>PEGASUS_MSG_HOME</h5>
1889 <ul>
1890 <b>Description: </b>This value is not used by the CIM
1891 Server. The CIM Server uses the messageDir configuration
1892 parameter to locate the directory where the ICU resource bundles.
1893 However, CIM Client applications must rely on an alternative
1894 denise.eckstein 1.1 mechanism to locate this directory.<br>
|
1895 kumpf 1.12 <b>Default Value: </b>if $PEGASUS_HOME is set then
|
1896 karl 1.29 "$PEGASUS_HOME/msg" else "."<br>
|
1897 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>$PEGASUS_HOME/msg<br>
1898 <b>Recommended Value (Release Build): </b>Not Set <br>
1899 <b>Required: </b>No<br>
1900 </ul>
1901
1902 <h3>Configuration Properties</h3>
1903
1904 <h4>Notation</h4>
1905
|
1906 kumpf 1.12 <p>This section describes the notation used to define the
|
1907 denise.eckstein 1.1 configuration properties.</p>
1908
1909 <ul>
1910
1911 <h5>Default Value</h5>
1912 The value of <i>Default Value</i> is the OpenPegasus
1913 default setting for this configuration option. This
1914 value is used if a platform-specific setting is not
|
1915 kumpf 1.12 defined.
|
1916 denise.eckstein 1.1
1917 <h5>Recommended Default Value</h5>
|
1918 kumpf 1.12 The PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a
1919 platform vendor to easily toggle between two sets of
|
1920 denise.eckstein 1.1 configurations options, a set of options tuned for the
|
1921 karl 1.29 development/debug ("Development Build") environment
|
1922 denise.eckstein 1.1 and a set of options tuned for the production environment
|
1923 kumpf 1.12 ("Release Build"). The value of
1924 <i>Recommended Value (Development Build)</i>
|
1925 denise.eckstein 1.1 is the recommended default value for use in a development/
|
1926 kumpf 1.12 debug environment. The value of
|
1927 denise.eckstein 1.1 <i>Recommended Value (Release Build)</i> is the recommended
|
1928 kumpf 1.12 default value for use in a production environment.
1929
|
1930 denise.eckstein 1.1 <h5>Recommend To Be Fixed/Hidden</h5>
1931 Configuration options can be defined as fixed or hidden.
1932 A "fix" configuration option is set at build time
|
1933 kumpf 1.12 and cannot be changed without rebuilding. "Fixed"
|
1934 denise.eckstein 1.1 configuration options are not displayed using the cimconfig
|
1935 kumpf 1.12 command. This feature can be used by vendors to limit
|
1936 denise.eckstein 1.1 OpenPegasus functionality and configurability.
|
1937 kumpf 1.12
1938 A "hidden" configuration option is an option that is
|
1939 denise.eckstein 1.1 configurable (i.e., "not fixed"), but not externally
1940 advertised using the cimconfig command. The "hidden"
1941 feature can be used to define "internal use only"
1942 configuration options.
|
1943 kumpf 1.12
|
1944 denise.eckstein 1.1 <h5>Dynamic?</h5>
1945 If yes, the value of the configuration option can be
1946 changed without stopping and restarting the CIM Server.
1947
1948 <h5>Directory Specifications</h5>
1949 <p>Note that the variables included in the following table
|
1950 kumpf 1.12 (e.g., $LOGDIR) are for documentation purposes only and
1951 have been defined to simplify the description of the
1952 configuration options. In particular,
|
1953 denise.eckstein 1.1 these variables DO NOT correspond to environment variables
|
1954 kumpf 1.12 implemented in the OpenPegasus code. Default values
1955 for the following variables are platform
|
1956 denise.eckstein 1.1 and vendor dependent and not documented in this document.</p>
1957
|
1958 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" height="228" width="148">
1959 <tbody><tr>
1960 <th bgcolor="#cae6ca" height="16" width="1"> </th>
|
1961 denise.eckstein 1.1 </tr>
1962 <tr align="center">
|
1963 karl 1.29 <td align="left" height="12" width="1">$LOGDIR</td>
|
1964 denise.eckstein 1.1 </tr>
1965 <tr align="center">
|
1966 karl 1.29 <td align="left" height="14" width="1">$PROVIDERDIRS</td>
|
1967 denise.eckstein 1.1 </tr>
1968 <tr align="center">
|
1969 karl 1.29 <td align="left" height="14" width="1">
|
1970 denise.eckstein 1.1 $PROVIDERMANAGERDIRS</td>
1971 </tr>
1972 <tr align="center">
|
1973 karl 1.29 <td align="left" height="14" width="1">$REPOSITORYDIR </td>
|
1974 denise.eckstein 1.1 </tr>
1975 <tr align="center">
|
1976 karl 1.29 <td align="left" height="14" width="1">$CERTIFICATEDIR
|
1977 denise.eckstein 1.1 </td>
1978 </tr>
1979 <tr align="center">
|
1980 karl 1.29 <td align="left" height="14" width="1">$LOCALAUTHDIR</td>
|
1981 denise.eckstein 1.1 </tr>
1982 <tr align="center">
|
1983 karl 1.29 <td align="left" height="14" width="1">$TRACEDIR</td>
|
1984 denise.eckstein 1.1 </tr>
1985 <tr align="center">
|
1986 karl 1.29 <td align="left" height="14" width="1">$CONFIGDIR</td>
|
1987 denise.eckstein 1.1 </tr>
1988 <tr align="center">
|
1989 karl 1.29 <td align="left" height="14" width="1">$PIDFILE</td>
|
1990 denise.eckstein 1.1 </tr>
1991 <tr align="center">
|
1992 karl 1.29 <td align="left" height="14" width="1">$RANDOMDIR</td>
|
1993 denise.eckstein 1.1 </tr>
1994 <tr align="center">
|
1995 karl 1.29 <td align="left" height="14" width="1">$SOCKETDIR</td>
|
1996 denise.eckstein 1.1 </tr>
1997 <tr align="center">
|
1998 karl 1.29 <td align="left" height="14" width="1">$MESSAGEDIR</td>
|
1999 denise.eckstein 1.1 </tr>
|
2000 karl 1.29 </tbody></table>
|
2001 kumpf 1.12 </ul>
|
2002 denise.eckstein 1.1
2003 <h4>Definitions</h4>
2004
2005 <h5>authorizedUserGroups</h5>
2006 <ul>
|
2007 kumpf 1.12 <b>Description:</b> If the <b>authorizedUserGroups</b>
|
2008 denise.eckstein 1.1 property is set, the value is interpreted as a list of
2009 comma-separated user groups whose members may issue CIM
2010 requests. A user who is not a member of any of these groups is
2011 restricted from issuing CIM requests, with the exception of
2012 privileged users (root user). If the <b>authorizedUserGroups</b>
2013 property is not set, any user may issue CIM requests.<br>
2014 <b>Default Value: </b>blank<br>
2015 <b>Recommended Default Value (Development Build): </b>blank<br>
2016 <b>Recommended Default Value (Release Build): </b>blank<br>
2017 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2018 No/No<br>
2019 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2020 <b>Dynamic?: </b>No<br>
2021 <b>Example: </b>
2022 #cimconfig -s authorizedUserGroups=users,systemusers -p<br>
2023 <b>Considerations: </b>This feature is available only when
2024 the OpenPegasus source is compiled with the flag
2025 PEGASUS_ENABLE_USERGROUP_AUTHORIZATION set.
2026 </ul>
2027
2028 <h5>daemon</h5>
2029 denise.eckstein 1.1 <ul>
2030 <b>Description: </b>This option enables/disables forking of
2031 the code to create a background daemon process.<br>
2032 <b>Default Value: </b>true<br>
2033 <b>Recommended Default Value (Development Build): </b>true<br>
2034 <b>Recommended Default Value (Release Build): </b>true<br>
2035 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2036 No/No<br>
2037 <b>Recommend To Be Fixed/Hidden (Release Build): </b>
2038 No/Yes<br>
2039 <b>Dynamic?: </b>No<p> <br>
2040 <br>
|
2041 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2042 <tbody><tr>
2043 <th bgcolor="#cae6ca" width="168">Platform</th>
2044 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2045 denise.eckstein 1.1 </tr>
2046 <tr align="center">
2047 <td width="168">Linux</td>
2048 <td align="left" width="350">
2049 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2050 </tr>
2051 <tr align="center">
2052 <td width="168">HP-UX</td>
2053 <td align="left" width="350">
2054 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2055 </tr>
2056 <tr align="center">
2057 <td width="168">OpenVMS</td>
2058 <td align="left" width="350">
2059 Pegasus/Config/DefaultPropertyTableVms.h</td>
2060 </tr>
|
2061 karl 1.29 </tbody></table>
2062 </p></ul>
|
2063 denise.eckstein 1.1
2064 <h5>enableAssociationTraversal</h5>
2065 <ul>
2066 <b>Description: </b>If true, the CIM Server will support
|
2067 kumpf 1.12 the four association traversal operators: Associators,
|
2068 denise.eckstein 1.1 AssociatorNames,References, and ReferenceNames.<br>
2069 <b>Default Value: </b>true<br>
2070 <b>Recommended Default Value (Development Build): </b>true<br>
2071 <b>Recommended Default Value (Release Build): </b>true<br>
2072 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2073 No/No<br>
2074 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2075 <b>Dynamic?: </b>No<br>
|
2076 kumpf 1.12 <b>Considerations: </b>There is still an outstanding
|
2077 denise.eckstein 1.1 Provider Registration issue that restricts the degree to
2078 which separate Providers can register for Associations.<br>
2079 <br>
|
2080 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2081 <tbody><tr>
2082 <th bgcolor="#cae6ca" width="168">Platform</th>
2083 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2084 denise.eckstein 1.1 </tr>
2085 <tr align="center">
2086 <td width="168">Linux</td>
2087 <td align="left" width="350">
2088 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2089 </tr>
2090 <tr align="center">
2091 <td width="168">HP-UX</td>
2092 <td align="left" width="350">
2093 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2094 </tr>
2095 <tr align="center">
2096 <td width="168">OpenVMS</td>
2097 <td align="left" width="350">
2098 Pegasus/Config/DefaultPropertyTableVms.h</td>
2099 </tr>
|
2100 karl 1.29 </tbody></table>
|
2101 denise.eckstein 1.1 </ul>
2102
2103 <h5>enableAuditLog</h5>
2104 <ul>
|
2105 kumpf 1.12 <b>Description: </b>Used to enable or disable audit
|
2106 denise.eckstein 1.1 logging at run time. If true, audit logging will be enabled.<br>
2107 <b>Recommended Default Value (Development Build): </b>false<br>
2108 <b>Recommended Default Value (Release Build): </b>false<br>
2109 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2110 No/No<br>
2111 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2112 <b>Dynamic?: </b>Yes<br>
2113 <b>Source Configuration File: </b>
2114 Pegasus/Config/DefaultPropertyTable.h<br>
2115 </ul>
2116
2117 <h5>enableAuthentication</h5>
2118 <ul>
2119 <b>Description: </b>If true, a Client must be authenticated
2120 to access the CIM Server.<br>
2121 <b>Recommended Default Value (Development Build): </b>false<br>
2122 <b>Recommended Default Value (Release Build): </b>true<br>
2123 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2124 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2125 <b>Dynamic?: </b>No<br>
2126 <b>Source Configuration File: </b>
2127 denise.eckstein 1.1 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2128 </ul>
2129
2130 <h5>enableBinaryRepository</h5>
2131 <ul>
2132 <b>Description: </b>Setting this to true will activate the
2133 binary repository support on the next restart of cimserver.<br>
2134 <b>Recommended Default Value (Development Build): </b>false<br>
2135 <b>Recommended Default Value (Release Build): </b>false<br>
2136 <b>Recommend To Be Fixed/Hidden (Development Build): </b>Yes<br>
2137 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2138 <b>Dynamic?: </b>No<br>
2139 <b>Considerations: </b>Repositories containing a mixture
2140 of binary and XML objects are supported.<br>
2141 <b>Source Configuration File: </b>
|
2142 karl 1.29 Pegasus/Config/RepositoryPropertyOwner.cpp<p></p>
|
2143 denise.eckstein 1.1 </ul>
2144
2145
2146 <h5>enableHttpConnection</h5>
2147 <ul>
2148 <b>Description: </b>If true, allows connections to
2149 the CIM Server using the HTTP protocol<br>
2150 <b>Default Value: </b>true<br>
2151 <b>Recommended Default Value (Development Build): </b>true<br>
2152 <b>Recommended Default Value (Release Build): </b>false<br>
2153 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2154 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2155 <b>Dynamic?: </b>No<br>
2156 <b>Considerations: </b>
|
2157 kumpf 1.12 Enabling HTTP will allow clients to connect with security
2158 properties different than those associated with encrypted SSL
|
2159 denise.eckstein 1.1 traffic, and its configured SSL authentication or other security
2160 behavior. This option should only be enabled in environments
2161 where sending the HTTP Request and HTTP Response as
2162 clear text messages does not introduce a security risk.
|
2163 kumpf 1.12 Note that if authentication is enabled (enableAuthentication),
2164 user names and passwords will be included in the text of the
|
2165 denise.eckstein 1.1 HTTP message.<br>
2166 <br>
|
2167 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2168 <tbody><tr>
2169 <th bgcolor="#cae6ca" width="168">Platform</th>
2170 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2171 denise.eckstein 1.1 </tr>
2172 <tr align="center">
2173 <td width="168">Linux</td>
2174 <td align="left" width="350">
2175 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2176 </tr>
2177 <tr align="center">
2178 <td width="168">HP-UX</td>
2179 <td align="left" width="350">
2180 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2181 </tr>
2182 <tr align="center">
2183 <td width="168">OpenVMS</td>
2184 <td align="left" width="350">
2185 Pegasus/Config/DefaultPropertyTableVms.h</td>
2186 </tr>
|
2187 karl 1.29 </tbody></table>
|
2188 denise.eckstein 1.1 </ul>
2189
2190 <h5>enableHttpsConnection</h5>
2191 <ul>
|
2192 kumpf 1.12 <b>Description: </b>If true, allows connections to
2193 the CIM Server using the HTTPS protocol (HTTP using
|
2194 denise.eckstein 1.1 Secure Socket Layer encryption)<br>
2195 <b>Default Value: </b>false<br>
2196 <b>Recommended Default Value (Development Build): </b>true<br>
2197 <b>Recommended Default Value (Release Build): </b>true<br>
2198 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2199 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2200 <b>Dynamic?: </b>No<br>
2201 <b>Considerations: </b>For this option to work,
2202 the environment variable PEGASUS_HAS_SSL must have
2203 been set when CIM Server was built.<br>
2204 <br>
|
2205 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2206 <tbody><tr>
2207 <th bgcolor="#cae6ca" width="168">Platform</th>
2208 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2209 denise.eckstein 1.1 </tr>
2210 <tr align="center">
2211 <td width="168">Linux</td>
2212 <td align="left" width="350">
2213 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2214 </tr>
2215 <tr align="center">
2216 <td width="168">HP-UX</td>
2217 <td align="left" width="350">
2218 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2219 </tr>
2220 <tr align="center">
2221 <td width="168">OpenVMS</td>
2222 <td align="left" width="350">
2223 Pegasus/Config/DefaultPropertyTableVms.h</td>
2224 </tr>
|
2225 karl 1.29 </tbody></table>
|
2226 denise.eckstein 1.1 </ul>
2227
2228 <h5>enableIndicationService</h5>
2229 <ul>
2230 <b>Description: </b>If true, the CIM Server will support
2231 CIM Indications.<br>
2232 <b>Default Value: </b>true<br>
2233 <b>Recommended Default Value (Development Build): </b>true<br>
2234 <b>Recommended Default Value (Release Build): </b>true<br>
2235 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2236 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2237 venkat.puvvada 1.15 <b>Dynamic?: </b>Yes/No<br>
2238 <b>Considerations: </b>When enableIndicationService is set to
2239 false dynamically, delete subscription requests are sent to all
2240 indication providers and indication related operations are
2241 not supported until indication service is re-enabled. Dynamic
2242 configuration facility is available only when Pegasus is compiled
2243 with PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT=true. Clients
2244 who wants to utilize the IndicationService services MUST check for
2245 CIM_IndicationService EnabledState and HealthState properties to know
2246 the current indication service state. For example, User can enumerate
2247 instances of CIM_IndicationService and there is exactly one instance
2248 of CIM_IndicationService returned. (Ex. using cimcli command
2249 'cimcli ei -n root/PG_InterOp CIM_IndicationService'). When requested state
2250 change(Enabled/Disabled) cannot be made because of timeout or some
2251 other exception IndicationService HealthState is set to "Degraded/Warning".
2252 For example, if user requested for indication service disable (by setting
2253 enableIndicationService=false), disable failed because of timeout or some
2254 other exception. Now service health state is set to "Degraded/Warning"
2255 and service EnabledState will remain enabled. User can now identify the
2256 faulty provider causing the timeout or any other problem and can take
2257 appropriate action. User can again request for service disable to recover
2258 venkat.puvvada 1.15 from degraded state. Similar sequence applies while enabling the indication
2259 service. Only difference is that service EnabledState is set to Enabled
2260 if exception or timeout happens. There is no automatic recovery from
2261 degraded state is available at present.<br>
|
2262 denise.eckstein 1.1 <br>
|
2263 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2264 <tbody><tr>
2265 <th bgcolor="#cae6ca" width="168">Platform</th>
2266 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2267 denise.eckstein 1.1 </tr>
2268 <tr align="center">
2269 <td width="168">Linux</td>
2270 <td align="left" width="350">
2271 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2272 </tr>
2273 <tr align="center">
2274 <td width="168">HP-UX</td>
2275 <td align="left" width="350">
2276 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2277 </tr>
2278 <tr align="center">
2279 <td width="168">OpenVMS</td>
2280 <td align="left" width="350">
2281 Pegasus/Config/DefaultPropertyTableVms.h</td>
2282 </tr>
|
2283 karl 1.29 </tbody></table>
|
2284 denise.eckstein 1.1 </ul>
2285
2286 <h5>enableNamespaceAuthorization</h5>
2287 <ul>
2288 <b>Description: </b>If true, the CIM Server restricts
|
2289 kumpf 1.12 access to namespaces based on configured user authorizations
2290 [user authorizations may be configured using the cimauth
|
2291 denise.eckstein 1.1 command]<br>
2292 <b>Default Value: </b>false<br>
2293 <b>Recommended Default Value (Development Build): </b>false<br>
2294 <b>Recommended Default Value (Release Build): </b>false<br>
2295 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2296 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2297 <b>Dynamic?: </b>No<br>
2298 <b>Considerations: </b>
2299 This option offers limited functionality and, in most
2300 environments, expensive to administer. It's use is not
2301 recommended.<br>
2302 <b>Source Configuration File: </b>
2303 Pegasus/Config/SecurityPropertyOwner.cpp</ul>
2304
2305 <h5>enableNormalization</h5>
2306 <ul>
|
2307 kumpf 1.12 <b>Description: </b>If true, objects returned from instance
|
2308 denise.eckstein 1.1 providers are validated and normalized. <br>
2309 <b>Default Value: </b>true<br>
2310 <b>Recommended Default Value (Development Build): </b>true<br>
2311 <b>Recommended Default Value (Release Build): </b>false<br>
2312 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2313 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2314 kavita.gupta 1.7 <b>Dynamic?: </b>Yes<br>
|
2315 denise.eckstein 1.1 <b>Considerations: </b>
2316 <ul>
2317 <li>Any errors encountered during normalization result in a
|
2318 kumpf 1.12 CIMException with the status code set to CIM_ERR_FAILED
2319 and a meaningful, context specific error description
|
2320 denise.eckstein 1.1 (messages will be localized). Providers that catch the
|
2321 kumpf 1.12 exception have an opportunity to handle the error.
|
2322 denise.eckstein 1.1 Otherwise, the exception is passed to the Provider Manager
|
2323 kumpf 1.12 and becomes the response for that Provider.
|
2324 karl 1.29 </li><li>Provider Modules that are listed on the
|
2325 kumpf 1.12 excludeModulesFromNormalization
2326 configuration option are excluded from normalization.
|
2327 karl 1.29 </li><li>Since the concept of normalization is relatively new to
|
2328 denise.eckstein 1.1 OpenPegasus and it establishes and enforces rules for
|
2329 kumpf 1.12 objects returned by providers, it should only
2330 apply to providers written against the SDK in which it was
|
2331 denise.eckstein 1.1 introduced (or later). Therefore only Provider Modules that
|
2332 kumpf 1.12 have the following InterfaceType and InterfaceVersion
2333 combination will be subject to normalization:
|
2334 denise.eckstein 1.1 <ul>
|
2335 kumpf 1.12 <li>'C++Default' / 2.5.0 or greater
|
2336 karl 1.29 </li><li>'CMPI' / 2.0.0 or greater
2337 </li><li>'JMPI' / 1.0.0 or greater
2338 </li></ul>
2339 </li></ul>
|
2340 denise.eckstein 1.1 <b>Source Configuration File: </b>
2341 Pegasus/Config/NormalizationPropertyOwner.cpp<br>
2342 </ul>
2343
2344
2345 <h5>enableRemotePrivilegedUserAccess</h5>
2346 <ul>
|
2347 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows
|
2348 denise.eckstein 1.1 access by a privileged user from a remote system<br>
2349 <b>Default Value: </b>true<br>
2350 <b>Recommended Default Value (Development Build): </b>true<br>
2351 <b>Recommended Default Value (Release Build): </b>true<br>
2352 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2353 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2354 <b>Dynamic?: </b>No<br>
2355 <b>Considerations: </b>Many management operations require
2356 privileged user access. Disabling remote access by
|
2357 kumpf 1.12 privileged user could significantly affect
|
2358 denise.eckstein 1.1 functionality.<br>
2359 <b>Source Configuration File: </b>
2360 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2361 </ul>
2362
2363 <h5>enableSubscriptionsForNonprivilegedUsers</h5>
2364 <ul>
2365 <b>Description: </b>If true, operations (create instance,
|
2366 kumpf 1.12 modify instance, delete instance, get instance, enumerate
2367 instances, enumerate instance names) on indication
2368 filter, listener destination, and subscription instances
|
2369 denise.eckstein 1.1 may be performed by non-privileged users. Otherwise, these
2370 operations may only be performed on these instances by
2371 privileged users.<br>
2372 <b>Default Value: </b>true<br>
2373 <b>Recommended Default Value (Development Build): </b>true<br>
2374 <b>Recommended Default Value (Release Build): </b>false<br>
2375 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2376 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2377 <b>Dynamic?: </b>No<br>
|
2378 kumpf 1.12 <b>Considerations: </b>This option has meaning only if
|
2379 denise.eckstein 1.1 enableIndicationService=true.<br>
2380 <b>Source Configuration File: </b>
2381 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2382 </ul>
2383
2384 <h5>excludeModulesFromNormalization</h5>
2385 <ul>
|
2386 kumpf 1.12 <b>Description: </b>If the excludeModulesfromNormalization
2387 property is set, the value is interpreted as a list of
2388 comma-separated Provider Module names (as specified in
2389 PG_ProviderModule.Name) to exclude from validation and
|
2390 denise.eckstein 1.1 normalization.<br>
|
2391 karl 1.29 <b>Default Value: </b>""<br>
|
2392 denise.eckstein 1.1 <b>Recommended Default Value (Development Build):</b>
|
2393 karl 1.29 ""<br>
|
2394 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>
|
2395 karl 1.29 ""<br>
|
2396 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2397 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2398 <b>Dynamic?: </b>No<br>
2399 <b>Considerations: </b>All objects managed by all
2400 providers will be excluded from validation and normalization
2401 if its module name appears in this list.<br>
2402 <b>Source Configuration File: </b>
2403 Pegasus/Config/NormalizationPropertyOwner.cpp
2404 </ul>
2405
2406 <h5>forceProviderProcesses</h5>
2407 <ul>
2408 <b>Description: </b>If true, the CIM Server runs Providers
2409 in separate processes rather than loading and calling Provider
2410 libraries directly within the CIM Server process.<br>
|
2411 kumpf 1.12 <b>Default Value: </b>Dependent on the value of
|
2412 denise.eckstein 1.1 PEGASUS_DEFAULT_ENABLE_OOP<br>
2413 <b>Recommended Default Value (Development Build):</b>true (HP-UX,
2414 Linux)<br>
2415 <b>Recommended Default Value (Release Build): </b>true (HP-UX,
2416 Linux)<br>
2417 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2418 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2419 <b>Dynamic?: </b>No<br>
2420 <b>Considerations: </b>In a dynamic, potentially multi-vendor,
|
2421 kumpf 1.12 environment, the ability to run Providers in separate processes
2422 can significantly increase the stability, maintainability and
|
2423 denise.eckstein 1.1 supportability of the overall solution. Running Providers
2424 in separate process spaces: (1) helps isolate components (i.e.,
|
2425 kumpf 1.12 cimserver and Providers) from a catastrophic failure
|
2426 denise.eckstein 1.1 (segmentation faults, memory leaks) of a single Provider and (2)
2427 reduces the risk of accidental or malicious sharing of sensitive
|
2428 kumpf 1.12 data among Providers. This benefit comes at a cost.
2429 Moving Providers out of the cimserver process increases
|
2430 denise.eckstein 1.1 communication costs and can significantly increase response
2431 time. Actual results will vary, but it is common for
2432 response times to increase by a factor of 2.<br>
|
2433 kumpf 1.12 <b>Note 1: </b>When forceProviderProcesses is true, the CIM
|
2434 denise.eckstein 1.1 Server will load each Provider Module (i.e., library) into a
2435 separate process. Providers in different Provider Modules
2436 cannot depend on a communication mechanism that
2437 requires them to run in the same process space.<br>
|
2438 kumpf 1.12 <b>Note 2: </b>Although the catastrophic failure of an
|
2439 denise.eckstein 1.1 Out-Of-Process (OOP) Provider Module will not result in a
2440 failure of the CIM Server process, if the failed OOP Provider
|
2441 kumpf 1.12 Module included Indication Providers, Indications may be
|
2442 denise.eckstein 1.1 lost. If logging is enabled, the CIM Server will log a
2443 message informing administrators of what happened and what
2444 corrective actions can be taken.<br>
2445 <br>
|
2446 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2447 <tbody><tr>
2448 <th bgcolor="#cae6ca" width="168">Platform</th>
2449 <th bgcolor="#cae6ca" width="350">
|
2450 denise.eckstein 1.1 Source Configuration File</th>
2451 </tr>
2452 <tr align="center">
2453 <td width="168">Linux</td>
2454 <td align="left" width="350">
2455 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2456 </tr>
2457 <tr align="center">
2458 <td width="168">HP-UX</td>
2459 <td align="left" width="350">
2460 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2461 </tr>
2462 <tr align="center">
2463 <td width="168">OpenVMS</td>
2464 <td align="left" width="350">
2465 Pegasus/Config/DefaultPropertyTableVms.h</td>
2466 </tr>
|
2467 karl 1.29 </tbody></table>
|
2468 denise.eckstein 1.1 </ul>
2469
2470 <h5>home</h5>
2471 <ul>
2472 <b>Description: </b>If set, this configuration option defines
2473 the runtime default value for PEGASUS_HOME.<br>
2474 <b>Default Value: </b>"./"<br>
2475 <b>Recommended Default Value (Development Build)</b>"./"<br>
2476 <b>Recommended Default Value (Release Build)""</b><br>
2477 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2478 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2479 <b>Dynamic?: </b>No<p> <br>
2480 <br>
|
2481 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2482 <tbody><tr>
2483 <th bgcolor="#cae6ca" width="168">Platform</th>
2484 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2485 denise.eckstein 1.1 </tr>
2486 <tr align="center">
2487 <td width="168">Linux</td>
2488 <td align="left" width="350">
2489 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2490 </tr>
2491 <tr align="center">
2492 <td width="168">HP-UX</td>
2493 <td align="left" width="350">
2494 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2495 </tr>
2496 <tr align="center">
2497 <td width="168">OpenVMS</td>
2498 <td align="left" width="350">
2499 Pegasus/Config/DefaultPropertyTableVms.h</td>
2500 </tr>
|
2501 karl 1.29 </tbody></table>
2502 </p></ul>
|
2503 denise.eckstein 1.1
|
2504 marek 1.34 <h5>hostname</h5>
2505 <ul>
2506 <b>Description: </b> Can be used to override the local system supplied
2507 hostname without domain the CIM Server is using to build objects.
2508 If not set, querying this configuration option will report
2509 the system supplied hostname and behavior is not changed.<br>
2510 Setting this value to a valid hostname on CIM Server startup or as
2511 planned value will force the server to assume the configured name as the
2512 local hosts name. Setting this allows the administrator to set the name
2513 that operations such as associator, reference etc. return with
2514 object paths.<br>
2515 In common setups it is not recommended to explicitly set this value.
2516 <br>
2517 <b>Usage scenarios: </b> The following scenarios in which changing the
2518 default value makes sense are known today:<br>
2519 1. The case where what the CIM Server shall return to clients for
2520 host name is NOT the name of the current host but some
2521 administrator defined name
2522 (ex. system behind a firewall or some redirector).<br>
2523 2. Embedded systems that have a system set hostname which is not
2524 valid and needs to be overridden by CIM administrator without
2525 marek 1.34 changing the actual IP configuration.
2526 <br>
2527 <b>Recommended Default Value (Development Build): </b>
2528 blank<br>
2529 <b>Recommended Default Value (Release Build): </b>
2530 blank<br>
2531 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2532 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2533 <b>Dynamic?: </b>No<br>
2534 <b>Considerations: </b> When setting this configuration option the option
2535 fullyQualifiedHostName should be adjusted too.<br>
2536 Providers returning the systems hostname in an
2537 instance property might return a different value then the CIM server is
2538 setting in the object path. hostnames explicitly set into the object
2539 paths by providers will not be overridden by the CIM Server to allow
2540 cross-namespace associations.
2541 <br>
2542 It is necessary to upgrade existing repositories using the repupgrade
2543 utility when upgrading from an OpenPegasus version less than 2.12.
2544 <br>
2545 <b>Source Configuration File: </b>
2546 marek 1.34 Pegasus/Config/DefaultPropertyOwner.cpp
2547 </ul>
2548
2549 <h5>fullyQualifiedHostName</h5>
2550 <ul>
2551 <b>Description: </b> Can be used to override the local system supplied
2552 fully qualified hostname (with domain) the CIM Server is using to build
2553 objects.
2554 If not set, querying this configuration option will report
2555 the system supplied fully qualified hostname and behavior is
2556 not changed.<br>
2557 Setting this value to a valid hostname on CIM Server startup or as
2558 planned value will force the server to assume the configured name as the
2559 local hosts name with domain. Setting this allows the administrator to
2560 set the name that indication operations and the CIM_ObjectManager
2561 assume for SystemName returned as instance and key properties.<br>
2562 In common setups it is not recommended to explicitly set this value.
2563 <br>
2564 <b>Usage scenarios: </b> The following scenarios in which changing the
2565 default value makes sense are known today:<br>
2566 1. The case where what the CIM Server shall return to clients for
2567 marek 1.34 SystemName is NOT the name of the current host but some
2568 administrator defined name
2569 (ex. system behind a firewall or some redirector).<br>
2570 2. Embedded systems that have a system set hostname which is not
2571 valid and needs to be overridden by CIM administrator without
2572 changing the actual IP configuration.
2573 <br>
2574 <b>Recommended Default Value (Development Build): </b>
2575 blank<br>
2576 <b>Recommended Default Value (Release Build): </b>
2577 blank<br>
2578 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2579 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2580 <b>Dynamic?: </b>No<br>
2581 <b>Considerations: </b> When setting this configuration option the option
2582 fullyQualifiedHostName should be adjusted too.<br>
2583 Providers returning the systems hostname in an
2584 instance property might return a different value then the CIM server is
2585 setting in SystemName.
2586 <br>
2587 It is necessary to upgrade existing repositories using the repupgrade
2588 marek 1.34 utility when upgrading from an OpenPegasus version less than 2.12.
2589 <br>
2590 <b>Source Configuration File: </b>
2591 Pegasus/Config/DefaultPropertyOwner.cpp
2592 </ul>
2593
|
2594 denise.eckstein 1.1 <h5>httpPort</h5>
2595 <ul>
|
2596 kumpf 1.12 <b>Description: </b>OpenPegasus first attempts to look up the
|
2597 denise.eckstein 1.1 port number for HTTP using getservbyname for the 'wbem-http'
|
2598 kumpf 1.12 service. The httpPort configuration setting is used only when the
|
2599 denise.eckstein 1.1 getservbyname lookup fails.<br>
2600 <b>Default Value: </b>blank<br>
2601 <b>Recommended Default Value (Development Build): </b>blank<br>
2602 <b>Recommended Default Value (Release Build): </b>5988<br>
2603 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2604 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2605 <b>Dynamic?: </b>No<br>
|
2606 kumpf 1.12 <b>Considerations: </b>(1)The use of 5988 for WBEM HTTP is
|
2607 denise.eckstein 1.1 recommended by the DMTF. This port has been registered with
2608 <a href="http://www.iana.org/assignments/port-numbers">
2609 IANA</a>. In a production environment, the recommendation is
2610 to use /etc/services to configure the value of this port. (2)
|
2611 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
|
2612 karl 1.29 httpPort was changed from 5988 to "". This
|
2613 denise.eckstein 1.1 change was made to allow the OpenPegasus to differentiate
|
2614 kumpf 1.12 between a default setting of 5988 and a customer-defined
|
2615 denise.eckstein 1.1 setting of 5988. With this change, if the port
|
2616 kumpf 1.12 number is explicitly set, the configured port will be used
|
2617 denise.eckstein 1.1 regardless of the settings in /etc/services. If no port number
2618 is specified, the server will continue to use the value in
2619 /etc/services.<br>
2620 <br>
|
2621 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2622 <tbody><tr>
2623 <th bgcolor="#cae6ca" width="168">Platform</th>
2624 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2625 denise.eckstein 1.1 </tr>
2626 <tr align="center">
2627 <td width="168">Linux</td>
2628 <td align="left" width="350">
2629 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2630 </tr>
2631 <tr align="center">
2632 <td width="168">HP-UX</td>
2633 <td align="left" width="350">
2634 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2635 </tr>
2636 <tr align="center">
2637 <td width="168">OpenVMS</td>
2638 <td align="left" width="350">
2639 Pegasus/Config/DefaultPropertyTableVms.h</td>
2640 </tr>
|
2641 karl 1.29 </tbody></table>
|
2642 denise.eckstein 1.1 </ul>
2643
2644 <h5>httpsPort</h5>
2645 <ul>
2646 <b>Description: </b>
2647 OpenPegasus first attempts to look up the port number for HTTPS
2648 using getservbyname for the 'wbem-https' service. The httpsPort
|
2649 kumpf 1.12 configuration setting is used only when the getservbyname lookup
|
2650 denise.eckstein 1.1 fails.<br>
2651 <b>Default Value: </b>blank<br>
2652 <b>Recommended Default Value (Development Build): </b>blank<br>
2653 <b>Recommended Default Value (Release Build): </b>5989<br>
2654 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2655 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2656 <b>Dynamic?: </b>No<br>
2657 <b>Considerations: </b>(1)The use of 5989 for WBEM HTTPS
2658 is recommended by the DMTF. This port has been registered with
2659 <a href="http://www.iana.org/assignments/port-numbers">IANA</a>.
|
2660 kumpf 1.12 In a production environment, the recommendation is to use
|
2661 denise.eckstein 1.1 /etc/services to configure the value of this port.(2)
|
2662 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
|
2663 karl 1.29 httpPort was changed from 5989 to "". This
|
2664 kumpf 1.12 change was made to allow the OpenPegasus to differentiate
2665 between a default setting of 5989 and a customer-defined
|
2666 denise.eckstein 1.1 setting of 5989. With this change, if the port number
|
2667 kumpf 1.12 is explicitly set, the configured port will be used regardless
|
2668 denise.eckstein 1.1 of the settings in /etc/services. If no port number is specified,
2669 the server will continue to use the value in /etc/services.<br>
2670 <br>
2671
|
2672 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2673 <tbody><tr>
2674 <th bgcolor="#cae6ca" width="168">Platform</th>
2675 <th bgcolor="#cae6ca" width="350">Source Configuration File</th>
|
2676 denise.eckstein 1.1 </tr>
2677 <tr align="center">
2678 <td width="168">Linux</td>
2679 <td align="left" width="350">
2680 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2681 </tr>
2682 <tr align="center">
2683 <td width="168">HP-UX</td>
2684 <td align="left" width="350">
2685 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2686 </tr>
2687 <tr align="center">
2688 <td width="168">OpenVMS</td>
2689 <td align="left" width="350">
2690 Pegasus/Config/DefaultPropertyTableVms.h</td>
2691 </tr>
|
2692 karl 1.29 </tbody></table>
|
2693 denise.eckstein 1.1 </ul>
2694
2695 <h5>idleConnectionTimeout</h5>
2696 <ul>
2697 <b>Description: </b>If set to a positive integer, this value
2698 specifies a minimum timeout value for idle client connections.
2699 If set to zero, idle client connections do not time out.<br>
2700 <b>Recommended Default Value (Development Build): </b>0<br>
2701 <b>Recommended Default Value (Release Build): </b>0<br>
2702 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2703 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2704 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2705 denise.eckstein 1.1 <b>Considerations: </b>A client connection is considered
2706 idle when it is not in the process of sending a request and
2707 the CIM Server is not processing a request from that connection.
|
2708 kumpf 1.12 An idle connection timeout allows reclamation of the system
|
2709 denise.eckstein 1.1 resources allocated for idle CIM Server connections. Note that
2710 the CIM Server may allow an idle connection to persist longer
|
2711 kumpf 1.12 than the configured timeout value based on server activity.
2712 Some client applications may not behave correctly if a
|
2713 denise.eckstein 1.1 connection timeout is introduced. Client compatibility should be
2714 considered when configuring an idle connection timeout value.
|
2715 kumpf 1.12 The idle connection time is computed using the system clock.
|
2716 denise.eckstein 1.1 Thus, resetting the system clock may cause unexpected timeout
|
2717 kumpf 1.12 behavior.This config property can be changed dynamically. The
|
2718 kavita.gupta 1.11 changes will apply to all new and existing connections. <br>
|
2719 denise.eckstein 1.1 </ul>
2720
|
2721 venkat.puvvada 1.21 <h5>maxFailedProviderModuleRestarts</h5>
2722 <ul>
2723 <b>Description: </b>If set to a positive integer, this value
2724 specifies the number of times the failed provider module with
2725 indications enabled are restarted automatically before being
2726 moved to Degraded state. If set to zero, failed provider module
2727 is not restarted with indications enabled automatically and
2728 will be moved to Degraded state immediately.<br>
2729 <b>Recommended Default Value (Development Build): </b>3<br>
2730 <b>Recommended Default Value (Release Build): </b>3<br>
2731 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2732 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2733 <b>Dynamic?: </b>Yes<br>
2734 <b>Considerations: </b>This option controls the automatic
2735 re-enabling of the failed provider module with indications
2736 enabled. If the provider module with indications enabled fails
2737 very frequently, it affects the CIMServer normal operations because
2738 CIMServer would be busy with reloading the provider module every
2739 time it fails. This option would be helpful if the long running
2740 indication provider crashes and the management application want
2741 to receive the indications from the provider while provider fix
2742 venkat.puvvada 1.21 is being delivered. In case of provider module grouping, if one of
2743 the indication provider crashes, it affects all indication providers
2744 in the provider modules of the group. Note that this is the facility
2745 provided by the CIMServer for temporary recovery of the provider and
2746 the ultimate goal SHALL be fixing the faulty provider.
2747 </ul>
2748
|
2749 venkat.puvvada 1.27 <h5>maxIndicationDeliveryRetryAttempts</h5>
2750 <ul>
2751 <b>Description: </b> If set to a positive integer, this value
2752 defines the number of times that the indication service will
2753 try to deliver an indication to a particular listener destination.
2754 This does not effect the original delivery attempt, thus if set to 0,
2755 cimserver will only try to deliver the indication once.<br>
2756 <b>Recommended Default Value (Development Build): </b>3<br>
2757 <b>Recommended Default Value (Release Build): </b>3<br>
2758 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2759 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2760 <b>Dynamic?: </b>No<br>
2761 <b>Considerations: </b> This value is used to set the
2762 CIM_IndicationService.DeliveryRetryAttempts property. See
2763 CIM_IndicationService.DeliveryRetryAttempts property for more details. This
2764 option is supported only when PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT
2765 is defined.<br>
2766 <b>Source Configuration File: </b>
2767 Pegasus/Config/IndicationServicePropertyOwner.cpp<br>
2768 </ul>
2769
2770 venkat.puvvada 1.27 <h5>minIndicationDeliveryRetryInterval</h5>
2771 <ul>
2772 <b>Description: </b> If set to a positive integer, this value defines
2773 the minimal time interval in seconds for the indication service to wait
2774 before retrying to deliver an indication to a listener destination that
2775 previously failed. Cimserver may take longer due to QoS or other processing.<br>
2776 <b>Recommended Default Value (Development Build): </b>30<br>
2777 <b>Recommended Default Value (Release Build): </b>30<br>
2778 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2779 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2780 <b>Dynamic?: </b>No<br>
2781 <b>Considerations: </b> This value is used to initialize the property
2782 CIM_IndicationService.DeliveryRetryInterval. See
2783 CIM_IndicationService.DeliveryRetryInterval property for more details. This
2784 option is supported only when PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT
2785 is defined.<br>
2786 <b>Source Configuration File: </b>
2787 Pegasus/Config/IndicationServicePropertyOwner.cpp<br>
2788 </ul>
2789
|
2790 dev.meetei 1.33 <h5>listenAddress</h5>
2791 <ul>
2792 <b>Description: </b> Network interface where the cimserver
2793 should listen to for connections.For example listenAddress=All or
2794 listenAddress=121.12.33.112 or listenAddress=121.33.21.26,127.0.0.1,
2795 fe80::fe62:9346%eth0<br>
2796 <b>Recommended Default Value (Development Build): </b>All<br>
2797 <b>Recommended Default Value (Release Build): </b>No Specific suggestion<br>
2798 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2799 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2800 <b>Dynamic?: </b>No<br>
2801 <b>Considerations: </b>Default value of "All" will make cimserver to listen on all the network interfaces.<br>
2802 <b>Source Configuration File: </b>
2803 Pegasus/Config/DefaultPropertyOwner.cpp<br>
2804 </ul>
2805
|
2806 denise.eckstein 1.1 <h5>logdir</h5>
2807 <ul>
2808 <b>Description: </b>Specifies the name of the directory
2809 to be used for the OpenPegasus specific log files.<br>
2810 <b>Recommended Default Value (Development Build): </b>logs<br>
2811 <b>Recommended Default Value (Release Build): </b>$LOGDIR<br>
2812 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2813 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2814 <b>Dynamic?: </b>Yes<br>
|
2815 kumpf 1.12 <b>Considerations: </b>This option is not supported if
|
2816 denise.eckstein 1.1 PEGASUS_USE_SYSLOGS is defined.<br>
2817 <b>Source Configuration File: </b>
2818 Pegasus/Config/LogPropertyOwner.cpp<br>
2819 </ul>
2820
2821 <h5>logLevel</h5>
2822 <ul>
|
2823 kumpf 1.12 <b>Description: </b>Defines the desired level of logging.
|
2824 denise.eckstein 1.1 Valid values include: TRACE, INFORMATION, WARNING, SEVERE,
2825 FATAL.<br>
2826 <b>Default Value: </b>"INFORMATION"<br>
2827 <b>Recommended Default Value (Development Build): </b>
2828 "INFORMATION"<br>
2829 <b>Recommended Default Value (Release Build): </b>"SEVERE"<br>
2830 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2831 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2832 <b>Dynamic?: </b>Yes<br>
2833 <b>Considerations: </b><br>
2834 <b>Source Configuration File: </b>
2835 Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2836 </ul>
2837
|
2838 mreddy 1.3 <h5>maxLogFileSizeKBytes</h5>
2839 <ul>
|
2840 kumpf 1.12 <b>Description: </b>Specifies the maximum size of the logfile in Kilo
|
2841 mreddy 1.3 Bytes. If the logfile size exceeds maxLogFileSizeKBytes logfile will be pruned.<br>
2842 <b>Default Value: </b>32768<br>
2843 <b>Recommended Default Value (Development Build): </b> 32768<br>
2844 <b>Recommended Default Value (Release Build): </b>32768<br>
2845 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2846 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/No<br>
2847 <b>Dynamic?:</b> Yes<br>
2848 <b>Considerations:</b> This option is not supported if PEGASUS_USE_SYSLOGS is defined. Minimum accepted value is 32 KB. <br>
2849 <b>Source Configuration File:</b> Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2850 </ul>
|
2851 denise.eckstein 1.1 <h5>maxProviderProcesses</h5>
2852 <ul>
2853 <b>Description:</b> Limits the number of provider
|
2854 kumpf 1.12 processes (see 'forceProviderProcesses) that may run
|
2855 denise.eckstein 1.1 concurrently. A 'maxProviderProcesses' value of '0' indicates
2856 that the number of Provider Agent processes is unlimited<br>
2857 <b>Default Value: </b>0<br>
2858 <b>Recommended Default Value (Development Build):</b> 0<br>
2859 <b>Recommended Default Value (Release Build):</b> 0<br>
2860 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2861 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
|
2862 kavita.gupta 1.9 <b>Dynamic?: </b>Yes<br>
|
2863 kumpf 1.12 <b>Considerations: </b>Consider there are five provider processes
2864 already running and the maxProviderProcesses is dynamically changed to
2865 four. In this case though new provider processes will not be created
|
2866 kavita.gupta 1.9 but existing five will continue running<br>
|
2867 denise.eckstein 1.1 <br>
|
2868 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
2869 <tbody><tr>
2870 <th bgcolor="#cae6ca" width="168">Platform</th>
2871 <th bgcolor="#cae6ca" width="350">
|
2872 denise.eckstein 1.1 Source Configuration File</th>
2873 </tr>
2874 <tr align="center">
2875 <td width="168">Linux</td>
2876 <td align="left" width="350">
2877 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2878 </tr>
2879 <tr align="center">
2880 <td width="168">HP-UX</td>
2881 <td align="left" width="350">
2882 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2883 </tr>
2884 <tr align="center">
2885 <td width="168">OpenVMS</td>
2886 <td align="left" width="350">
2887 Pegasus/Config/DefaultPropertyTableVms.h</td>
2888 </tr>
|
2889 karl 1.29 </tbody></table>
|
2890 denise.eckstein 1.1 </ul>
2891
2892 <h5>messageDir</h5>
2893 <ul>
2894 <b>Description: </b>Specifies the name of the directory to
2895 be used for the OpenPegasus translated messages.<br>
2896 <b>Default Value: </b>msg<br>
2897 <b>Recommended Default Value (Development Build): </b>msg<br>
2898 <b>Recommended Default Value (Release Build):</b>
2899 $MESSAGEDIR/msg<br>
2900 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2901 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2902 <b>Dynamic?: </b>No<br>
2903 <b>Considerations: </b>Only used when message localization
2904 is enabled. See PEGASUS_HAS_MESSAGES for details.<br>
2905 <b>Source Configuration File: </b>
2906 FileSystemPropertyOwner.cpp<br>
2907 </ul>
2908
2909 <h5>providerDir</h5>
2910 <ul>
|
2911 kumpf 1.12 <b>Description: </b>Specifies the names of the directories
|
2912 denise.eckstein 1.1 that contains Provider executables.<br>
2913 <b>Recommended Default Value (Development Build): </b>lib<br>
2914 <b>Recommended Default Value (Release Build): </b>
2915 $PROVIDERDIRS<br>
2916 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2917 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
|
2918 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2919 denise.eckstein 1.1 <b>Considerations: </b>The CIM Server runs as a privileged
2920 user. And, since Providers run in the same process space as the
|
2921 kumpf 1.12 CIM Server, Providers also have privileged access to the
|
2922 karl 1.29 system. Allowing a registered Provider’s executable to be
|
2923 kumpf 1.12 replaced with malicious code would result in a critical
|
2924 denise.eckstein 1.1 security defect, giving a malicious user privileged access
|
2925 marek 1.34 to the system. Administrators are responsible for ensuring
|
2926 denise.eckstein 1.1 that only trusted Providers are loaded into providerDir.
2927 In order to simplify the management task associated with
2928 securing Provider executable, the value of providerDir can be
2929 fixed at build time (i.e., set to one or more fixed, well-known
2930 locations).<br>
2931 <b>Source Configuration File: </b>
2932 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2933 </ul>
|
2934 kumpf 1.12
|
2935 denise.eckstein 1.1 <h5>providerManagerDir</h5>
2936 <ul>
2937 <b>Description: </b>Specifies the name of the directory that
2938 contains the ProviderManager plugin libraries.<br>
2939 <b>Recommended Default Value (Development Build): </b>lib<br>
2940 <b>Recommended Default Value (Release Build): </b>
2941 $PROVIDERMANAGERDIRS<br>
2942 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2943 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2944 <b>Dynamic?: </b>No<br>
2945 <b>Considerations: </b>Should be a dedicated directory to
2946 minimize inspection of non-applicable files. Additionally,
2947 since all calls to the providers go through the provider
2948 managers, the same care should be taken with regards to
2949 security for the provider manager directory, as for provider
2950 directories.<br>
2951 <b>Source Configuration File: </b>
2952 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
|
2953 kumpf 1.12 </ul>
|
2954 denise.eckstein 1.1
2955 <h5>repositoryDir</h5>
2956 <ul>
|
2957 kumpf 1.12 <b>Description: </b>Specifies the name of the directory
|
2958 denise.eckstein 1.1 to be used for the OpenPegasus repository.<br>
2959 <b>Recommended Default Value (Development Build): </b>repository<br>
2960 <b>Recommended Default Value (Release Build): </b>
2961 $REPOSITORYDIR/repository<br>
2962 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2963 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2964 <b>Dynamic?: </b>No<br>
2965 <b>Considerations: </b><br>
2966 <b>Source Configuration File: </b>
2967 Pegasus/Config/FileSystemPropertyOwner.cpp<p><br>
|
2968 karl 1.29 </p></ul>
|
2969 denise.eckstein 1.1
2970 <h5>repositoryIsDefaultInstanceProvider</h5>
2971 <ul>
|
2972 kumpf 1.12 <b>Description: </b>If true, the Repository functions
2973 as the Instance Provider for all classes for which there
2974 is not an explicitly registered Provider. This flag is
2975 also used to control the behavior of the repository when
|
2976 denise.eckstein 1.1 processing association operators.<br>
2977 <b>Recommended Default Value (Development Build): </b>true<br>
|
2978 kumpf 1.12 <b>Recommended Default Value (Release Build): </b>false<br>
|
2979 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2980 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
2981 <b>Dynamic?: </b>No<br>
2982 <b>Considerations: </b>This flag can be used to configure
2983 the CIM Server to allow the Repository to be used by CIM Clients
2984 and CIM Providers as a dynamic data store. The setting of this
|
2985 kumpf 1.12 flag will significantly affect CIM Server behavior as viewed
2986 by the CIM Client.<br>
2987
2988 The following issues should be considered when setting
|
2989 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=true:
2990
2991 <ul>
|
2992 kumpf 1.12 <li><b>Authorization.</b> The repository has no
|
2993 denise.eckstein 1.1 concept of which users (or components) are authorized to
2994 perform which operations.</li>
|
2995 karl 1.29 <li><b>Appearance of instrumentation.</b> A client application
|
2996 kumpf 1.12 cannot determine whether instrumentation exists for a
2997 given CIM class. For example, imagine a client
2998 issues a CreateInstance operation on a Disk class
|
2999 denise.eckstein 1.1 for which no provider is registered.
3000 The instance will be stored in the repository, and
|
3001 karl 1.29 the client gets a "success" response. Does that mean a
|
3002 denise.eckstein 1.1 disk device has been created on the server? Even worse,
|
3003 kumpf 1.12 when another client issues an EnumerateInstances
|
3004 denise.eckstein 1.1 operation, the spurious Disk instance is returned.
3005 With repositoryIsDefaultInstanceProvider=false, the
|
3006 kumpf 1.12 CreateInstance operation above would have returned a
3007 NOT_SUPPORTED error.</li>
|
3008 karl 1.29 <li><b>Potential for inconsistent data.</b> Using the
|
3009 denise.eckstein 1.1 repository as a data cache increases the probability
3010 that a client will see stale or incorrect data. A
|
3011 kumpf 1.12 provider can better control the correlation
|
3012 denise.eckstein 1.1 between the data returned and the current state of the
|
3013 kumpf 1.12 underlying managed resource (whether or not the provider
|
3014 denise.eckstein 1.1 caches the data).</li>
3015 </ul>
3016 <br>
|
3017 kumpf 1.12
3018 The following issues should be considered when setting
|
3019 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=false:
3020
3021 <ul>
3022 <li><b>Provider Availability.</b> Certain Providers have been
|
3023 kumpf 1.12 developed to use the Repository as a dynamic data store.
3024 These Providers are currently not supported on system
|
3025 denise.eckstein 1.1 where this flag is disabled. E.g., the Common Diagnostics
|
3026 kumpf 1.12 Model (CDM) Provider
|
3027 denise.eckstein 1.1 (http://developer.intel.com/design/servers/cdm/)
|
3028 kumpf 1.12 relies on use of the Repository to store instances
3029 of CIM_DiagnosticSetting. If this flag set to
3030 false, this Provider will not function correctly. Note
3031 that this feature is supported by other WBEM
|
3032 denise.eckstein 1.1 implementation. Therefore, disabling this feature
3033 can increase the cost of migrating existing Providers to
3034 OpenPegasus.</li>
|
3035 kumpf 1.12 </ul>
|
3036 denise.eckstein 1.1
|
3037 kumpf 1.12 <b>Source Configuration File: </b>
|
3038 denise.eckstein 1.1 Pegasus/Config/RepositoryPropertyOwner.cpp<br>
3039 </ul>
|
3040 kumpf 1.12
|
3041 denise.eckstein 1.1 <h5>shutdownTimeout</h5>
3042 <ul>
3043 <b>Description: </b>When a cimserver -s shutdown command is
3044 issued, specifies the maximum time in seconds for the CIM Server
3045 to complete outstanding CIM operation requests before shutting
3046 down; if the specified timeout period expires, the CIM Server
|
3047 kumpf 1.12 will shut down, even if there are still CIM operations in
|
3048 denise.eckstein 1.1 progress. Minimum value is 2 seconds.<br>
3049 <b>Recommended Default Value (Development Build): </b>10<br>
3050 <b>Recommended Default Value (Release Build): </b>10<br>
3051 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3052 <b>Recommend To Be Fixed/Hidden (Release Build):</b>No/No<br>
3053 <b>Dynamic?: </b>Yes<br>
3054 <b>Considerations: </b><br>
3055 <b>Source Configuration File: </b>
3056 Pegasus/Config/ShutdownPropertyOwner.cpp<br>
3057 </ul>
3058
3059 <h5>slp</h5>
3060 <ul>
3061 <b>Description: </b>When set to true, OpenPegasus activates
3062 an SLP SA and issues DMTF defined SLP advertisements to this SA
3063 on startup.<br>
3064 <b>Default Value: </b>false<br>
3065 <b>Recommended Default Value (Development Build): </b>false<br>
3066 <b>Recommended Default Value (Release Build): </b>false<br>
3067 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3068 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3069 denise.eckstein 1.1 <b>Dynamic?: </b>No<p> <br>
3070 <br>
|
3071 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" height="80" width="531">
3072 <tbody><tr>
3073 <th bgcolor="#cae6ca" height="16" width="168">Platform</th>
3074 <th bgcolor="#cae6ca" height="16" width="350">
|
3075 denise.eckstein 1.1 Source Configuration File</th>
3076 </tr>
3077 <tr align="center">
|
3078 karl 1.29 <td height="14" width="168">Linux</td>
3079 <td align="left" height="14" width="350">
|
3080 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableLinux.h</td>
3081 </tr>
3082 <tr align="center">
|
3083 karl 1.29 <td height="14" width="168">HP-UX</td>
3084 <td align="left" height="14" width="350">
|
3085 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableHpux.h</td>
3086 </tr>
3087 <tr align="center">
|
3088 karl 1.29 <td height="16" width="168">OpenVMS</td>
3089 <td align="left" height="16" width="350">
|
3090 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableVms.h</td>
3091 </tr>
|
3092 karl 1.29 </tbody></table>
3093 </p></ul>
|
3094 denise.eckstein 1.1
|
3095 marek 1.36 <h5>slpProviderStartupTimeout</h5>
3096 <ul>
3097 <b>Description: </b>Timeout value in milli seconds used to specify
3098 how long the registration with an SLP SA may take. Registration will be
3099 retried three times. This value only needs to be increased in case that
3100 the loading of a set of providers who reporting their implementation of a
3101 registered profile takes very long.<br>
3102 <b>Default Value: </b>300000<br>
3103 <b>Recommended Default Value (Development Build): </b>300000<br>
3104 <b>Recommended Default Value (Release Build): </b>300000<br>
3105 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3106 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3107 <b>Dynamic?: </b>No<p> <br>
3108 <br>
3109 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" height="80" width="531">
3110 <tbody><tr>
3111 <th bgcolor="#cae6ca" height="16" width="168">Platform</th>
3112 <th bgcolor="#cae6ca" height="16" width="350">
3113 Source Configuration File</th>
3114 </tr>
3115 <tr align="center">
3116 marek 1.36 <td height="14" width="168">Linux</td>
3117 <td align="left" height="14" width="350">
3118 Pegasus/Config/DefaultPropertyTable.h</td>
3119 </tr>
3120 <tr align="center">
3121 <td height="14" width="168">HP-UX</td>
3122 <td align="left" height="14" width="350">
3123 Pegasus/Config/DefaultPropertyTable.h</td>
3124 </tr>
3125 <tr align="center">
3126 <td height="16" width="168">OpenVMS</td>
3127 <td align="left" height="16" width="350">
3128 Pegasus/Config/DefaultPropertyTable.h</td>
3129 </tr>
3130 </tbody></table>
3131 </p></ul>
3132
|
3133 denise.eckstein 1.1 <h5>socketWriteTimeout</h5>
3134 <ul>
3135 <b>Description: </b>If the CIM Server receives an
3136 EWOULDBLOCK/EAGAIN error on a non-blocking write,
|
3137 kumpf 1.12 socketWriteTimeout defines the number of seconds the
3138 CIM Server will wait for the socket to get ready and resume
|
3139 denise.eckstein 1.1 writing data.<br>
3140 <b>Recommended Default Value (Development Build): </b>
3141 20 (seconds)<br>
3142 <b>Recommended Default Value (Release Build): </b>
3143 20 (seconds)<br>
3144 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3145 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
3146 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
3147 <b>Considerations: </b>Any changes made to this config property
|
3148 kumpf 1.12 dynamically will apply to new CIM Server connections only
|
3149 kavita.gupta 1.11 keeping old already established connections unchanged.<br>
|
3150 denise.eckstein 1.1 <b>Source Configuration File: </b>
3151 Pegasus/Config/DefaultPropertyTable.h
3152 </ul>
3153
3154 <h5>sslCertificateFilePath</h5>
3155 <ul>
|
3156 kumpf 1.12 <b>Description: </b>Contains the CIM Server SSL
|
3157 denise.eckstein 1.1 Certificate.<br>
3158 <b>Recommended Default Value (Development Build): </b>
3159 server.pem<br>
3160 <b>Recommended Default Value (Release Build): </b>
3161 $CERTIFICATEDIR/server.pem"<br>
3162 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3163 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3164 <b>Dynamic?: </b>No<br>
3165 <b>Considerations: </b>For a more detailed look at SSL options
3166 and their ramifications, please see the SSL guidelines.<br>
3167 <b>Source Configuration File: </b>
3168 Pegasus/Config/SecurityPropertyOwner.cpp
3169 </ul>
3170
|
3171 rohini.deshpande 1.28 <h5>sslCipherSuite</h5>
3172 <ul>
3173 <b>Description: </b>String containing OpenSSL cipher
3174 specifications to configure the cipher suite the client is
3175 permitted to negotiate with the server during the SSL
3176 handshake phase.<br>
3177 <b>Recommended Default Value (Development Build): </b>
3178 DEFAULT (the default cipher list of OpenSSL)<br>
3179 <b>Recommended Default Value (Release Build): </b>
3180 DEFAULT (the default cipher list of OpenSSL)<br>
3181 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3182 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3183 <b>Dynamic?: </b>No<br>
3184 <b>Considerations: </b>The value should be mentioned between
3185 single quotes since it can contain special characters like .+,
3186 !, -.. For more details look at SSL ciphers.<br>
3187 <b>Source Configuration File: </b>
3188 Pegasus/Config/SecurityPropertyOwner.cpp
3189 </ul>
3190
|
3191 denise.eckstein 1.1 <h5>sslClientVerificationMode</h5>
3192 <ul>
3193 <b>Description: </b>Describes the desired level of support
3194 for certificate-based authentication.
|
3195 karl 1.29 <ul style="margin-top: 0in;" type="circle">
3196 <li>“<b>required</b>” – The server requires certificate-based
|
3197 kumpf 1.12 client authentication. A client MUST present a
|
3198 denise.eckstein 1.1 trusted certificate in order to access the CIM Server.
|
3199 kumpf 1.12 If the client fails to send a certificate or sends an
|
3200 denise.eckstein 1.1 untrusted certificate, the connection will be rejected.</li>
|
3201 karl 1.29 <li>“<b>optional</b>” – The server supports, but does not
|
3202 kumpf 1.12 require, certificate-based client authentication. The
3203 server will request and attempt to validate a client
|
3204 denise.eckstein 1.1 certificate, however the connection will be accepted even
3205 if no certificate is sent or an untrusted certificate is
3206 sent. The server will then seek to authenticate the
3207 client via an authentication header.</li>
|
3208 karl 1.29 <li>“<b>disabled</b>” – The server does not support
|
3209 denise.eckstein 1.1 certificate-based client authentication.</li>
3210 </ul>
3211 <b>Recommended Default Value (Development Build): </b>
3212 disabled<br>
3213 <b>Recommended Default Value (Release Build): </b>
3214 disabled<br>
3215 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3216 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3217 <b>Dynamic?: </b>No<br>
3218 <b>Considerations: </b>(1) This property is only used if
|
3219 karl 1.29 <b>enableHttpsConnection</b> is <b>"true"</b>.
|
3220 denise.eckstein 1.1 (2) If the platform does not support PEGASUS_LOCAL_DOMAIN_SOCKET,
3221 OpenPegasus attempts to use either HTTPS or
|
3222 kumpf 1.12 HTTP to establish a local connection (connectLocal).
|
3223 denise.eckstein 1.1 For platforms that do not support PEGASUS_LOCAL_DOMAIN_SOCKET,
|
3224 kumpf 1.12 Clients which use connectLocal, such as cimconfig -l -c,
|
3225 denise.eckstein 1.1 cimprovider -l -s and cimserver -s, will not work if the
|
3226 karl 1.29 "sslClientVerificationMode" variable is set to
3227 "required" and HTTP is disabled. For these
|
3228 kumpf 1.12 platforms, the recommended course of action is to change the
|
3229 karl 1.29 property value to "optional."<br>
|
3230 denise.eckstein 1.1 <b>Source Configuration File: </b>
3231 Pegasus/Config/SecurityPropertyOwner.cpp
3232 </ul>
3233
3234 <h5>sslKeyFilePath</h5>
3235 <ul>
3236 <b>Description: </b>Contains the private key for the CIM
3237 Server SSL Certificate.<br>
3238 <b>Recommended Default Value (Development Build): </b>
3239 file.pem<br>
3240 <b>Recommended Default Value (Release Build): </b>
3241 $CERTIFICATEDIR/file.pem<br>
3242 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3243 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3244 <b>Dynamic?: </b>No<br>
3245 <b>Considerations: </b>File should be readable only by the
3246 user the cimserver is running as and/or privileged users. The
3247 file should be writeable only by a privileged user.<br>
3248 <b>Source Configuration File: </b>
3249 Pegasus/Config/SecurityPropertyOwner.cpp<br>
3250 </ul>
3251 denise.eckstein 1.1
3252 <h5>sslTrustStore</h5>
3253 <ul>
3254 <b>Description: </b>Specifies the location of the OpenSSL
|
3255 kumpf 1.12 truststore. Consistent with the OpenSSL implementation, a
|
3256 denise.eckstein 1.1 truststore can be either a file or directory. If the truststore
|
3257 kumpf 1.12 is a directory, all the certificates within the directory are
|
3258 denise.eckstein 1.1 considered trusted.<br>
3259 <b>Recommended Default Value (Development Build): </b>
3260 client.pem<br>
3261 <b>Recommended Default Value (Release Build): </b>
3262 $CERTIFICATEDIR/client.pem<br>
3263 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3264 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3265 <b>Dynamic?: </b>No<br>
3266 <b>Source Configuration File: </b>
3267 Pegsus/Config/SecurityPropertyOwner.cpp
3268 </ul>
3269
3270 <h5>sslTrustStoreUserName</h5>
3271 <ul>
3272 <b>Description: </b>Specifies the system user name to be
3273 associated with all certificate-based authenticated requests.<br>
3274 <b>Recommended Default Value (Development Build): </b>NONE<br>
3275 <b>Recommended Default Value (Release Build): </b>NONE<br>
3276 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3277 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3278 <b>Dynamic?: </b>No<br>
3279 denise.eckstein 1.1 <b>Considerations: </b>This property has no default; for
|
3280 kumpf 1.12 security reasons, the system administrator must explicitly
|
3281 denise.eckstein 1.1 specify this value. This feature allows a single user
3282 name to be specified. This user will be associated
3283 with all certificates in the truststore. In the future,
3284 OpenPegasus will allow a system administrator to associate a
3285 distinct user name with each certificate.<br>
3286 <b>Source Configuration File: </b>
3287 Pegsus/Config/SecurityPropertyOwner.cpp<br>
3288 </ul>
3289
3290 <h5>traceComponents</h5>
3291 <ul>
3292 <b>Description: </b>Defines the components to be traced.<br>
3293 <b>Default Value: </b>""<br>
3294 <b>Recommended Default Value (Development Build): </b>""<br>
3295 <b>Recommended Default Value (Release Build): </b>""<br>
3296 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3297 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3298 <b>Dynamic?: </b>Yes<br>
3299 <b>Source Configuration File: </b>
3300 Pegasus/Config/TracePropertyOwner.cpp<br>
3301 </ul>
3302 denise.eckstein 1.1
3303 <h5>traceFacility</h5>
3304 <ul>
|
3305 kumpf 1.12 <b>Description: </b>Defines the desired facility for trace
|
3306 karl 1.29 messages. Valid values include: "File"
3307 , "Log" and "Memory" .<br>
|
3308 denise.eckstein 1.1 <b>Default Value: </b>File<br>
3309 <b>Recommended Default Value (Development Build): </b>File<br>
3310 <b>Recommended Default Value (Release Build): </b>File<br>
3311 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3312 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3313 <b>Dynamic?: </b>Yes<br>
3314 <b>Case Sensitive?: </b>No<br>
|
3315 karl 1.29 <b>Considerations: </b>If you specify "File",
|
3316 kumpf 1.12 trace messagesare written into the file specified by the
|
3317 denise.eckstein 1.1 configuration option traceFilePath. If you specify
|
3318 karl 1.29 "Log", trace messages are written to the
|
3319 marek 1.14 OpenPegasus Log. If you specify Memory, the trace messages
3320 are collected in a wrap-around memory buffer.
3321 If this memory is part of a dump the trace messages can be
|
3322 karl 1.29 found by the eye-catcher "PEGASUSMEMTRACE" at
|
3323 marek 1.14 the top of the memory buffer. The trace is in clear text and
|
3324 karl 1.29 the last written message has the suffix "EOTRACE".<br>
|
3325 denise.eckstein 1.1 <b>Source Configuration File: </b>
3326 Pegasus/Config/TracePropertyOwner.cpp<br>
3327 </ul>
3328
3329 <h5>traceFilePath</h5>
3330 <ul>
3331 <b>Description: </b>Specifies the location of the
3332 OpenPegasus trace file.<br>
3333 <b>Default Value: </b>cimserver.trc<br>
3334 <b>Recommended Default Value (Development Build):</b>
3335 cimserver.trc<br>
3336 <b>Recommended Default Value (Release Build): </b>
3337 $TRACEDIR/cimserver.trc<br>
3338 <b>Recommend To Be Fixed/Hidden (Development Build):</b>No/No<br>
3339 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3340 <b>Dynamic?: </b>Yes<br>
3341 <b>Source Configuration File: </b>
3342 Pegasus/Config/TracePropertyOwner.cpp<br>
3343 </ul>
3344
3345 <h5>traceLevel</h5>
3346 denise.eckstein 1.1 <ul>
|
3347 karl 1.29 <b>Description: </b>Defines the desired level of
|
3348 denise.eckstein 1.1 tracing. Valid values include: 0, 1, 2, 3, 4, 5.<br>
3349 <b>Default Value: </b>0<br>
3350 <b>Recommended Default Value (Development Build): </b>0<br>
|
3351 karl 1.29 <b>Recommended Default Value (Release Build): </b>0<<br>
|
3352 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3353 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3354 <b>Dynamic?: </b>Yes<br>
3355 <b>Source Configuration File: </b>
3356 Pegasus/Config/TracePropertyOwner.cpp<br>
3357 </ul>
3358
|
3359 marek 1.14 <h5>traceMemoryBufferKbytes</h5>
3360 <ul>
3361 <b>Description: </b>Defines the size of the buffer for
3362 in memory tracing in kbytes ( 2<sup>10</sup> bytes ).
3363 Smallest value is 16.<br>
3364 <b>Default Value: </b>10240<br>
3365 <b>Recommended Default Value (Development Build): </b>10240<br>
3366 <b>Recommended Default Value (Release Build): </b>10240<br>
3367 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3368 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3369 <b>Dynamic?: </b>No<br>
3370 <b>Case Sensitive?: </b>No<br>
3371 <b>Considerations: </b>Is ignored if configuration
3372 property traceFacility is not set to Memory.<br>
3373 <b>Source Configuration File: </b>
3374 Pegasus/Config/TracePropertyOwner.cpp<br>
3375 </ul>
3376
|
3377 amit99shah 1.38 <h5>traceFileSizeKBytes</h5>
3378 <ul>
3379 <b>Description: </b>Defines the size of the tracefile in Kilo bytes. The trace file will be
3380 rolled once its size exceeds the specified size. <br>
3381 <b>Default Value: </b>1048576<br>
3382 <b>Recommended Default Value (Development Build): </b>1048576<br>
3383 <b>Recommended Default Value (Release Build): </b>1048576<br>
3384 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3385 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/Yes<br>
3386 <b>Dynamic?:</b> Yes<br>
3387 <b>Considerations:</b>Minimum accepted value is 10240 KB,Maximum accepted value is 2097152 KB. <br>
3388 <b>Source Configuration File:</b> Pegsus/Config/TracePropertyOwner.cpp<p> </p>
3389 </ul>
3390
3391 <h5>numberOfTraceFiles</h5>
3392 <ul>
3393 <b>Description: </b>Specifies the number of the tracefiles for rolling.<br>
3394 <b>Default Value: </b>3<br>
3395 <b>Recommended Default Value (Development Build): </b>3<br>
3396 <b>Recommended Default Value (Release Build): </b>3<br>
3397 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3398 amit99shah 1.38 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/Yes<br>
3399 <b>Dynamic?:</b> Yes<br>
3400 <b>Considerations:</b>Minimum accepted value is 3,Maximum accepted value is 20. <br>
3401 <b>Source Configuration File:</b> Pegsus/Config/TracePropertyOwner.cpp<p> </p>
3402 </ul>
3403
|
3404 denise.eckstein 1.1 <h3>Configuration Constants</h3>
3405
3406 <h4>Definitions</h4>
3407
3408 <h5>static char CURRENT_CONFIG_FILE [] = </h5>
3409 <ul>
3410 <b>Description: </b>Default file name for the current
3411 configuration file.<br>
3412 <b>Recommended Default Value (Development Build):</b>
3413 cimserver_current.conf<br>
3414 <b>Recommended Default Value (Release Build): </b>
3415 $CONFIGDIR/cimserver_current.conf<br>
3416 <b>Dynamic?: </b>No <br>
3417 <br>
|
3418 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
3419 <tbody><tr>
3420 <th bgcolor="#cae6ca" width="168">Platform</th>
3421 <th bgcolor="#cae6ca" width="350">
|
3422 denise.eckstein 1.1 Source Configuration File</th>
3423 </tr>
3424 <tr align="center">
3425 <td width="168">Linux</td>
3426 <td align="left" width="350">
3427 Pegasus/Config/ConfigFileDirLinux.h</td>
3428 </tr>
3429 <tr align="center">
3430 <td width="168">HP-UX</td>
3431 <td align="left" width="350">ConfigFileDirHpux.h</td>
3432 </tr>
3433 <tr align="center">
3434 <td width="168">OpenVMS</td>
3435 <td align="left" width="350">
3436 Pegasus/Config/ConfigFileDirVms.h</td>
3437 </tr>
|
3438 karl 1.29 </tbody></table>
|
3439 denise.eckstein 1.1 </ul>
3440
3441 <h5>static char PLANNED_CONFIG_FILE [] = </h5>
3442 <ul>
|
3443 kumpf 1.12 <b>Description: </b>Default file name for the planned
|
3444 denise.eckstein 1.1 configuration file.<br>
3445 <b>Recommended Default Value (Development Build): </b>
3446 cimserver_planned.conf<br>
3447 <b>Recommended Default Value (Release Build): </b>
3448 $CONFIGDIR/cimserver_planned.conf<br>
3449 <b>Dynamic?: </b>No<br>
3450 <br>
|
3451 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
3452 <tbody><tr>
3453 <th bgcolor="#cae6ca" width="168">Platform</th>
3454 <th bgcolor="#cae6ca" width="350">
|
3455 denise.eckstein 1.1 Source Configuration File</th>
3456 </tr>
3457 <tr align="center">
3458 <td width="168">Linux</td>
3459 <td align="left" width="350">
3460 Pegasus/Config/ConfigFileDirLinux.h</td>
3461 </tr>
3462 <tr align="center">
3463 <td width="168">HP-UX</td>
3464 <td align="left" width="350">
3465 Pegasus/Config/ConfigFileDirHpux.h</td>
3466 </tr>
3467 <tr align="center">
3468 <td width="168">OpenVMS</td>
3469 <td align="left" width="350">
3470 Pegasus/Config/ConfigFileDirVms.h</td>
3471 </tr>
|
3472 karl 1.29 </tbody></table>
|
3473 denise.eckstein 1.1 </ul>
3474
3475 <h5>static char CIMSERVER_START_FILE [] = </h5>
3476 <ul>
3477 <b>Description: </b>This is for the default file name
3478 for the cimserver startup file containing the PID.<br>
3479 <b>Default Value: </b>/tmp/cimserver_start.conf<br>
3480 <b>Recommended Default Value (Development Build): </b>
3481 /tmp/cimserver_start.conf<br>
3482 <b>Recommended Default Value (Release Build): </b>
3483 $PIDFILE<br>
3484 <b>Dynamic?: </b>No<br>
3485 <br>
|
3486 karl 1.29 <table bordercolordark="#666666" bordercolorlight="#CCCCCC" style="font-family: Arial;" border="1" cellspacing="1" width="531">
3487 <tbody><tr>
3488 <th bgcolor="#cae6ca" width="168">Platform</th>
3489 <th bgcolor="#cae6ca" width="350">
|
3490 denise.eckstein 1.1 Source Configuration File</th>
3491 </tr>
3492 <tr align="center">
3493 <td width="168">Linux</td>
3494 <td align="left" width="350">
3495 Pegasus/Config/ConfigFileDirLinux.h</td>
3496 </tr>
3497 <tr align="center">
3498 <td width="168">HP-UX</td>
3499 <td align="left" width="350">
3500 Pegasus/Config/ConfigFileDirHpux.h</td>
3501 </tr>
3502 <tr align="center">
3503 <td width="168">OpenVMS</td>
3504 <td align="left" width="350">
3505 Pegasus/Config/ConfigFileDirVms.h</td>
3506 </tr>
|
3507 karl 1.29 </tbody></table>
|
3508 denise.eckstein 1.1 </ul>
3509
3510 <h3>Configuration Macros</h3>
3511
3512 <h4>Definitions</h4>
3513
3514 <h5>PEGASUS_SSLCLIENT_CERTIFICATEFILE</h5>
3515 <ul>
3516 <b>Description: </b><br>
3517 <b>Recommended Default Value (Development Build): </b>client.pem<br>
3518 <b>Recommended Default Value (Release Build): </b>
3519 $CERTIFICATEDIR/client.pem<br>
3520 <b>Dynamic?: </b>No<br>
3521 <b>Source Configuration File: </b>
3522 Pegasus/Common/Constants.h<br>
3523 </ul>
3524
3525 <h5>PEGASUS_SSLCLIENT_RANDOMFILE</h5>
3526 <ul>
3527 <b>Description: </b>On platforms that do not support
|
3528 kumpf 1.12 /dev/random or /dev/urandom, OpenSSL will use this file to
3529 seed the PRNG (Pseudo-Random Number Generator). This
3530 PEGASUS_SSLCLIENT_RANDOMFILE defines the default CIM
|
3531 denise.eckstein 1.1 Client random file.<br>
3532 <b>Recommended Default Value (Development Build):</b>ssl.rnd<br>
3533 <b>Recommended Default Value (Release Build):</b>
3534 $RANDOMDIR/ssl.rnd<br>
3535 <b>Dynamic?: </b>No<br>
3536 <b>Considerations: </b>Use of this variable requires
|
3537 kumpf 1.12 PEGASUS_HAS_SSL to be set. CIM Client use of a
|
3538 denise.eckstein 1.1 shared random file is not recommended. On systems where
3539 /dev/random or /dev/urandom are not available, CIM Clients are
|
3540 kumpf 1.12 encouraged to generate a unique random file which
|
3541 denise.eckstein 1.1 contains sufficient entropy.<br>
3542 <b>Source Configuration File: </b>
3543 Pegasus/Common/Constants.h<br>
3544 </ul>
3545
3546 <h5>PEGASUS_SSLSERVER_RANDOMFILE</h5>
3547 <ul>
|
3548 kumpf 1.12 <b>Description: </b>On platforms that do not support
3549 /dev/random or /dev/urandom, OpenSSL will use this file
3550 to seed the PRNG (Pseudo-Random Number Generator). This
3551 PEGASUS_SSLSERVER_RANDOMFILE defines the CIM Server
|
3552 denise.eckstein 1.1 random file.<br>
3553 <b>Recommended Default Value (Development Build): </b>
3554 cimserver.rnd<br>
3555 <b>Recommended Default Value (Release Build): </b>
3556 $RANDOMDIR/cimserver.rnd<br>
3557 <b>Dynamic?: </b>No<br>
3558 <b>Considerations: </b>1)Use of this variable
3559 requires PEGASUS_HAS_SSL to be set.(2) On systems where
|
3560 kumpf 1.12 /dev/random or /dev/urandom are not available, CIM Server
3561 vendors need to be sure that the cimserver.rnd file
|
3562 denise.eckstein 1.1 contains sufficient entropy and is uniquely generated for
3563 each system.<br>
3564 <b>Source Configuration File: </b>
3565 Pegasus/Common/Constants.h<b><br>
|
3566 karl 1.29 </b></ul>
|
3567 denise.eckstein 1.1
|
3568 karl 1.29 <h5><b>PEGASUS_LOCAL_AUTH_DIR</b></h5>
|
3569 denise.eckstein 1.1 <ul>
|
3570 karl 1.29 <b> <b>Description:</b> </b>For local connections (i.e.,
|
3571 kumpf 1.12 connectLocal), OpenPegasus uses a file-based authentication
|
3572 denise.eckstein 1.1 mechanism.<br>
3573 <b>Recommended Default Value (Development Build): </b>/tmp<br>
3574 <b>Recommended Default Value (Release Build): </b>
3575 $LOCALAUTHDIR/localauth<br>
3576 <b>Dynamic?: </b>No<br>
3577 <b>Source Configuration File: </b>
3578 Pegasus/Common/Constants.h<br>
3579 </ul>
3580
3581 <h5>PEGASUS_LOCAL_DOMAIN_SOCKET_PATH</h5>
3582 <ul>
3583 <b>Description: </b><br>
3584 <b>Recommended Default Value (Development Build): </b>
3585 /tmp/cimxml.socket<br>
3586 <b>Recommended Default Value (Release Build): </b>
3587 $SOCKETDIR/cimxml.socket<br>
3588 <b>Dynamic?: </b>No<br>
3589 <b>Source Configuration File: </b>
3590 Pegasus/Common/Constants.h<br>
3591 </ul>
3592
3593 denise.eckstein 1.1 <hr>
|
3594 martin 1.13 <p>Licensed to The Open Group (TOG) under one or more contributor license
3595 agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
3596 this work for additional information regarding copyright ownership.
3597 Each contributor licenses this file to you under the OpenPegasus Open
3598 Source License; you may not use this file except in compliance with the
3599 License.</p>
3600 <p>Permission is hereby granted, free of charge, to any person obtaining a
3601 copy of this software and associated documentation files (the "Software"),
3602 to deal in the Software without restriction, including without limitation
3603 the rights to use, copy, modify, merge, publish, distribute, sublicense,
3604 and/or sell copies of the Software, and to permit persons to whom the
3605 Software is furnished to do so, subject to the following conditions:</p>
3606 <p>The above copyright notice and this permission notice shall be included
3607 in all copies or substantial portions of the Software.</p>
3608 <p>THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
3609 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
3610 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
3611 IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
3612 CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
3613 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
3614 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.</p>
|
3615 denise.eckstein 1.1 <hr>
|
3616 anusha.kandepu 1.32 </body></html>
|