1 denise.eckstein 1.1 <html>
2 <head>
|
3 kumpf 1.12 <link rel="stylesheet" href=
|
4 denise.eckstein 1.1 "http://www.opengroup.org/stylesheets/info1.css">
5 </head>
6
7 <body>
8 <hr>
9
10 <p align="center">
11 <b><font size="4">Recommended OpenPegasus Build and Configuration Options for Selected Platforms</font></b>
12 </p>
13
14 <hr>
15
16 <p><b>Abstract: </b>
17 This document defines a set of recommended options for building,
|
18 kumpf 1.12 testing and running OpenPegasus on a selected set of
|
19 denise.eckstein 1.1 platforms. In this version of the document, platform-specific configuration
20 information have been documented for the platforms described in the
21 "Documented Platforms" section of this document.
22 </p>
23
24 <p><b>Note 1: </b>
25 The recommendations defined in this document are not intended to document
26 the feature set included in any vendor's OpenPegasus-based product.
27 Rather, the purpose of this document is to provide input to vendors when
28 making product decisions.<BR>
29 </p>
30
31 <hr>
32
33 <h2>Definition of the Problem</h2>
34
35 <p>OpenPegasus supports a large number of build and runtime options.
36 Determining which options to use can be challenging. The purpose of this
37 document is to simplify the build, testing and administration of OpenPegasus
38 by providing a recommended, tested set of options.</p>
39
40 denise.eckstein 1.1 <h2>Documented Platforms</h2>
41
42 <p>Support for the OpenPegasus build and runtime options described in
|
43 kumpf 1.12 this document varies by platform. In this version of the
44 document, platform-specific configuration information has been included
|
45 denise.eckstein 1.1 for the platforms described in the following table. For all other
|
46 kumpf 1.12 platforms, please consult the OpenPegasus Platform Advocate for
|
47 denise.eckstein 1.1 additional information.</p>
48
49 <ul>
50 <table border="1" cellspacing="1" bordercolordark="#666666"
51 bordercolorlight="#CCCCCC" width=20%>
52 <tr>
53 <th bgcolor="#CAE6CA" align=center>Platform</th>
54 <th bgcolor="#CAE6CA" align=center>Status</th>
55 </tr>
56 <tr align="left">
57 <td>HPUX_IA64_ACC</td>
58 <td> </td>
59 </tr>
60 <tr align="left">
61 <td>HPUX_PARISC_ACC</td>
62 <td> </td>
63 </tr>
64 <tr align="left">
65 <td>LINUX_IA64_GNU</td>
66 <td> </td>
67 </tr>
68 denise.eckstein 1.1 <tr align="left">
69 <td>LINUX_IX86_GNU</td>
70 <td> </td>
71 </tr>
72 <tr align="left">
73 <td>LINUX_PPC64_GNU</td>
74 <td> </td>
75 </tr>
76 <tr align="left">
77 <td>LINUX_PPC_GNU</td>
78 <td> </td>
79 </tr>
80 <tr align="left">
81 <td>LINUX_XSCALE_GNU</td>
82 <td> </td>
83 </tr>
84 <tr align="left">
85 <td>LINUX_ZSERIES64_GNU</td>
86 <td> </td>
87 </tr>
88 <tr align="left">
89 denise.eckstein 1.1 <td>LINUX_ZSERIES_GNU</td>
90 <td> </td>
91 </tr>
92 <tr align="left">
93 <td>VMS_ALPHA_DECCXX</td>
94 <td> </td>
95 </tr>
96 <tr align="left">
97 <td>VMS_IA64_DECCXX</td>
98 <td> </td>
99 </tr>
100 </table>
101 </ul>
102
103 <h2>Proposed Solution</h2>
104
105 <h3>Security Considerations</h3>
106 <ol>
107 <li>
108 To avoid introducing security vulnerabilities, vendors must never
109 ship providers incompatible with the security assumptions used in
|
110 kumpf 1.12 their deployment.
111 For example, providers designed for a single-user deployment that
112 don't perform authorization must not be shipped with a CIM Server
113 that expects the providers to perform authorization. Note that
|
114 denise.eckstein 1.1 this authorization burden is considerably lighter if the provider
115 is registered as 'run as requestor' and if the CIM Server enables
116 that feature. See <a href=
117 "http://www.openpegasus.org/pp/uploads/40/7197/SecurityGuidePEP.htm">
118 PEP#223 - Security Coding Guidelines</a> for additional
119 details.
120 </li>
121 <li>
122 Vendors should ensure they configure the CIM Server consistently
123 with the security requirements of their deployment.
124 </li>
125 </ol>
126
127 <h3>Terminology Notes</h3>
128 <ol>
129 <li>
130 In this document, the term "Not Set" is used to indicate
131 that the a value for the environment variable has not been defined.
|
132 kumpf 1.12 "Set" is used to indicate that the value must be defined,
|
133 denise.eckstein 1.1 but the actual value of the variable is not checked.
134 </li>
135 </ol>
136
137 <h3>General Notes</h3>
138
139 <ol>
140 <li>
|
141 kumpf 1.12 Not all functionality described in this document has achieved
|
142 denise.eckstein 1.1 "Green"status, please refer to the
143 <a href="http://www.openpegasus.org/page.tpl?CALLER=index.tpl&ggid=799">
144 OpenPegasus Project Feature Status </a>page for information on
145 the maturity level of OpenPegasus features.
146 </li>
147 <li>
148 To encourage testing of new functionality, recommendations for the
149 Development Build may include features that are not yet recommended
150 for Release Builds.
151 </li>
152 </ol>
153
154 <h3>Environment Variable Settings for <u>Building</u> OpenPegasus</h3>
155
156 <h4>Definitions</h4>
157
158 <h5>ICU_INSTALL</h5>
159 <ul>
160 <b>Description: </b>When set, points to the directory containing
161 the <a href="%20http:/oss.software.ibm.com/icu"> ICU(International
|
162 kumpf 1.12 Components for Unicode)</a> installation. The 'include'
|
163 denise.eckstein 1.1 subdirectory is used to locate ICU header files at build time. The
164 'lib' subdirectory is used to locate ICU libraries at link
165 time.<br>
166 <b>Default Value: </b>Not Set<br>
167 <b>Recommended Value (Development Build): </b>Not Set<br>
168 <b>Recommended Value (Release Build): </b>Not Set<br>
169 <b>Required: </b>No. However, if PEGASUS_HAS_ICU is
170 set and ICU_INSTALL is not defined, the ICU libraries and header
171 files are expected to be installed in directories (e.g.,/usr/lib,
172 /usr/include) that are searched by default.<br>
173 <b>Considerations: </b>This environment variable is only used
174 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
175 additional details.
176 </ul>
177
178 <h5>ICU_NO_UPPERCASE_ROOT</h5>
179 <ul>
180 <b>Description: </b>If set, the messages in the root resource
181 bundle will NOT be capitalized. By default, the root resource
182 bundle is capitalized.<br>
183 <b>Default Value: </b>Not Set<br>
184 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>Not Set<br>
185 <b>Recommended Value (Release Build): </b>Not Set<br>
186 <b>Required: </b>No<br>
|
187 kumpf 1.12 <b>Considerations: </b>This environment variable is only used
188 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
|
189 denise.eckstein 1.1 additional details.
190 </ul>
191
192 <h5>ICU_ROOT_BUNDLE_LANG</h5>
193 <ul>
194 <b>Description: </b>If set, specifies the language
195 to be used to generate the root resource bundle. The
196 default value for ICU_ROOT_BUNDLE_LANG is _en.<br>
197 <b>Default Value: </b>_en<br>
198 <b>Recommended Value (Development Build): </b>No
199 Recommendation<br>
200 <b>Recommended Value (Release Build): </b>No Recommendation<br>
201 <b>Required: </b>No<br>
202 <b>Considerations: </b>This environment variable is
203 only used if PEGASUS_HAS_MESSAGES is set. Refer to
204 PEGASUS_HAS_MESSAGES for additional details.<br>
205 If set, resource bundles for the designated language must
206 exist for the following files:
207 <ul>
208 <li>pegasus/src/Pegasus/msg/Server/pegasusServer_en.txt</li>
209 <li>pegasus/src/Pegasus/msg/Listener/pegasusListener_en.txt</li>
210 denise.eckstein 1.1 </ul>
211 </ul>
212
213
214 <h5>OPENSSL_BIN</h5>
215 <ul>
216 <b>Description: </b>Specifies the location of the
217 OpenSSL <i>binary</i> directory. <br>
218 <b>Default Value: </b>Not Set<br>
219 <b>Recommended Value (Development Build): </b>
220 No Specific Recommendation<br>
221 <b>Recommended Value (Release Build): </b>
222 No Specific Recommendation<br>
223 <b>Required: </b>No. By default, the openssl binary is
224 expected to be installed in a directory that is searched by default
225 (e.g., /usr/bin). For platforms where this isn't true, the
226 OPENSSL_BIN environment variable may be used to define an
|
227 kumpf 1.12 alternative path. This environment variable is only used if
|
228 denise.eckstein 1.1 PEGASUS_HAS_SSL is set.
229 </ul>
230
231 <h5>OPENSSL_HOME</h5>
232 <ul>
233 <b>Description: </b>Specifies the location of the OpenSSL
234 SDK directory. This directory must contain the OpenSSL
235 <i>include</i> directory, $(OPENSSL_HOME)/include, and the OpenSSL
236 <i>library</i> directory, $(OPENSSL_HOME)/lib.<br>
237 <b>Default Value: </b>Not Set<br>
238 <b>Recommended Value (Development Build): </b>
239 No Specific Recommendation<br>
240 <b>Recommended Value (Release Build): </b>
241 No Specific Recommendation<br>
242 <b>Required: </b>Yes for Windows, if PEGASUS_HAS_SSL
243 is set. No for all other platforms. For AIX, the default
|
244 kumpf 1.12 value for OPENSSL_HOME is /usr/linux. For all other
|
245 denise.eckstein 1.1 platforms, the OpenSSL include files and libraries are expected
246 to be installed in directories that are searched by default (e.g.,
|
247 kumpf 1.12 /usr/bin, /usr/lib(64), and /usr/include).
|
248 denise.eckstein 1.1 For platforms where the default value is not correct, the
249 OPENSSL_HOME environment variable may be used to define an
250 alternative path (i.e., $(OPENSSL_HOME)/lib and
251 $(OPENSSL_HOME)/include). This environment variable
252 is only used if PEGASUS_HAS_SSL is set.
253 </ul>
254
255 <h5>PEGASUS_ALLOW_ABSOLUTEPATH_IN_PROVIDERMODULE</h5>
256 <ul>
257 <b>Description: </b>If set to true, a version of OpenPegasus
258 will be built that allows an absolute path to be specified as the
259 value of the Location property of PG_ProviderModule class.
260 Otherwise it does not allow the absolute path to be specified.<br>
261 <b>Default Value: </b>Not Set<br>
|
262 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
263 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
264 <b>Required: </b>No<p>
265 <b>Considerations: </b>To avoid introducing security
266 vulnerabilities, vendors should analyze their deployment
267 environments to understand the security implications of allowing
268 providers to be loaded from a dynamically changing set of
269 directories.<br>
270 </ul>
271
272 <h5>PEGASUS_CCOVER</h5>
273 <ul>
274 <b>Description: </b>This flag is currently only supported on
|
275 kumpf 1.12 HP-UX. It is enabled on the Nightly Build & Test system,
|
276 denise.eckstein 1.1 HP-UX_11iv3_Integrity_C-Cover. This system is
|
277 kumpf 1.12 used to generate the nightly BullseyeCoverage code coverage
|
278 denise.eckstein 1.1 metrics.<br>
279 <b>Default Value: </b>Not Set<br>
|
280 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
281 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
282 <b>Required: </b>No<br>
|
283 kumpf 1.12 <b>Considerations: </b>This flag is only supported on HP-UX to enable
|
284 denise.eckstein 1.1 CCOVER for the NB&T system.<br>
285 </ul>
286
287 <h5>PEGASUS_CIM_SCHEMA</h5>
288 <ul>
289 <b>Description: </b>This variable is used internally by the
|
290 kumpf 1.12 OpenPegasus development team when upgrading the OpenPegasus build
|
291 denise.eckstein 1.1 environment to a new version of the CIM Schema.<br>
292 <b>Default Value: </b>CIM217<br>
293 <b>Recommended Value (Development Build): </b>
294 No Specific Recommendation<br>
295 <b>Recommended Value (Release Build): </b>
296 No Specific Recommendation<br>
297 <b>Required: </b>No <br>
|
298 kumpf 1.12 <b>Considerations:</b> Additional code changes may be required when
299 upgrading or downgrading the CIM Schema version.</p>
|
300 denise.eckstein 1.1 </ul>
301
302 <h5>PEGASUS_CLASS_CACHE_SIZE</h5>
303 <ul>
304 <b>Description: </b>This environment variable gives the size of
305 the class cache used by CIM repository. This variable defines the
306 size of the class cache (i.e., the maximum number of classes that
|
307 kumpf 1.12 may be included). If this variable is set to 0, class caching is
|
308 denise.eckstein 1.1 disabled.<br>
309 <b>Default Value: </b>8<br>
310 <b>Recommended Value (Development Build): </b>8<br>
311 <b>Recommended Value (Release Build): </b>8<br>
|
312 kumpf 1.12 <b>Required: </b>No </p>
|
313 denise.eckstein 1.1 </ul>
314
315 <h5>PEGASUS_DEBUG</h5>
316 <ul>
|
317 kumpf 1.12 <b>Description: </b>Builds a debug version of OpenPegasus.
318 Concurrently, this flag controls a) enabling compiler specific
319 debug flags and b) the inclusion of debug-specific
|
320 denise.eckstein 1.1 functionality.<br>
321 <b>Default Value: </b>Not Set<br>
322 <b>Recommended Value (Development Build): </b>Set<br>
323 <b>Recommended Value (Release Build): </b>Not Set<br>
324 <b>Required: </b>No
325 </ul>
326
327 <h5>PEGASUS_DEFAULT_USERCTXT_REQUESTOR</h5>
328 <ul>
329 <b>Description: </b> If set to true, the <i>Requestor</i> user
330 context is used for providers that do not specify a UserContext
331 value in their registration. Otherwise, the <i>Privileged</i> user
332 context value is used by default. <br>
333 <b>Default Value: </b>false<br>
334 <b>Recommended Value (Development Build): </b>false<br>
335 <b>Recommended Value (Release Build): </b>false<br>
336 <b>Required: </b>No
337 <b>Considerations:</b> Use of the <i>Requestor</i> default has
338 improved provider security characteristics. However, some providers
339 may not operate correctly when run in the <i>Requestor</i> user
340 context and setting this value to true may cause those providers to
341 denise.eckstein 1.1 fail. Providers that can run in the <i>Requestor</i>
342 user context are encouraged to explicitly set the UserContext value
343 in their registration rather than rely on the default setting
|
344 kumpf 1.12 default by this variable. Please refer to
|
345 denise.eckstein 1.1 SecurityGuidelinesForDevelopers.html. PEP 223 for a discussion
|
346 kumpf 1.12 of the rationale/advantages of running providers in the
|
347 denise.eckstein 1.1 <i>Requestor </i> user context. <b>Note:</b> This build
|
348 kumpf 1.12 variable is not meaningful if the Provider User Context feature is
349 disabled with the PEGASUS_DISABLE_PROV_USERCTXT
|
350 denise.eckstein 1.1 setting.
351 </ul>
352
353
354 <h5>PEGASUS_DEFAULT_ENABLE_OOP</h5>
355 <ul>
356 <b>Description: </b>When this variable is set to false, by
357 default, Providers are run in the cimserver process
|
358 kumpf 1.12 (forceProviderProcesses=false). If this value is set true,
|
359 denise.eckstein 1.1 Providers are run out-of-process by default.<br>
360 <b>Default Value: </b>true for HP-UX and Linux, false for
361 other platforms<br>
362 <b>Recommended Value (Development Build): </b>true (HP-UX,
363 Linux)<br>
364 <b>Recommended Value (Release Build): </b>true (HP-UX,
365 Linux)<br>
366 <b>Required: </b>No<br>
|
367 kumpf 1.12 <b>Considerations: </b>This environment variable can be used to
|
368 denise.eckstein 1.1 change the "hard-coded" default setting for the
369 forceProviderProcesses configuration value.
370 Refer to the definition of <b>forceProviderProcesses</b> for
371 additional information.
372 </ul>
373
374 <h5>PEGASUS_DEST_LIB_DIR</h5>
375 <ul>
376 <b>Description: </b>Specifies the location of OpenPegasus
377 shared libraries.<br>
378 <b>Default Value: </b>$(PEGASUS_HOME)/lib<br>
379 <b>Recommended Value (Development Build): </b>
380 $(PEGASUS_HOME)/lib<br>
381 <b>Recommended Value (Release Build): </b>
382 No Specific Recommendation <br>
383 <b>Required: </b>No<br>
384 <b>Considerations: </b>This variable is NOT is used to define
|
385 kumpf 1.12 the location of the Provider library directories.
|
386 denise.eckstein 1.1 Please refer to the providerDir configuration option for details
387 on defining the directories for the Provider libraries.
388 </ul>
389
390
391 <h5>PEGASUS_DISABLE_DEPRECATED_INTERFACES</h5>
392 <ul>
|
393 kumpf 1.12 <b>Description: </b>Removes deprecated symbol definitions
|
394 denise.eckstein 1.1 from OpenPegasus runtime libraries.<br>
395 <b>Default Value:</b> Not Set<br>
396 <b>Recommended Value (Development Build):</b> Not Set<br>
397 <b>Recommended Value (Release Build): </b>Not Set<br>
398 <b>Required: </b>No<br>
399 <b>Considerations: </b>If this option is set, the resulting
|
400 kumpf 1.12 OpenPegasus libraries will not be binary compatible with
401 clients and providers built using interface definitions from
|
402 denise.eckstein 1.1 prior releases. This option may be used to slightly reduce binary
403 footprint in an environment where compatibility is not required.<br>
404 </ul>
405
406 <h5>PEGASUS_DISABLE_INSTANCE_QUALIFIERS</h5>
407 <ul>
408 <b>Description: </b>In the CIM Infrastructure Specification,
409 version 2.3, the DMTF clarified that instance-level qualifiers are
410 not allowed. In Version 1.2 of the Specification CIM
411 Operations over HTTP, use of the IncludeQualifiers parameter has
412 been DEPRECATED.<br>
413 <b>Default Value:</b> Not Set<br>
414 <b>Recommended Value (Development Build):</b> Not Set<br>
415 <b>Recommended Value (Release Build): </b>Not Set<br>
416 <b>Required: </b>No<br>
417 <b>Considerations: </b>Existing CIM Clients may depend on
|
418 kumpf 1.12 qualifiers being returned in the response. In this case, the
419 PEGASUS_DISABLE_INSTANCE_QUALIFIERS should not be set.
|
420 denise.eckstein 1.1 If this flag is set, the value of the IncludeQualifiers parameter
421 passed on the GetInstance and EnumerateInstance operations is
|
422 kumpf 1.12 ignored and qualifiers are not returned.
|
423 denise.eckstein 1.1 Disabling the return of qualifiers as part of a CIM Instance will
424 improve performance.<br>
425 </ul>
426
427 <h5>PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET</h5>
428 <ul>
429 <b>Description: </b>Disables support for local (same-system)
430 connections over a Unix domain socket. If this option is NOT set,
|
431 kumpf 1.12 the CIM Server is built to allow connections to be established
|
432 denise.eckstein 1.1 using a domain socket rather than a TCP port.<br>
433 <b>Default Value: </b>Not Set <br>
434 <b>Recommended Value (Development Build): </b>Not Set<br>
435 <b>Recommended Value (Release Build): </b>Not Set<br>
436 <b>Required: </b>No<br>
437 <b>Considerations: </b>(1) In high-threat environments, a
438 customer may want to disable all ports or reduce the number of
|
439 kumpf 1.12 exposed network ports. Supporting a local connection mechanism
|
440 denise.eckstein 1.1 using Unix domain socket allows the CIM Server to continue to
441 receive and process requests from local CIM Clients. (2)
442 Enabling this option may result in lose of functionality when
443 sslClientVerificationMode = required. (3)The
444 "LOCAL_DOMAIN_SOCKET" functionality has not been
445 implemented for Windows or OpenVMS. Therefore, by
|
446 kumpf 1.12 default, this option is "Set" for Windows and OpenVMS
|
447 denise.eckstein 1.1 platforms.
448 </ul>
449
450 <h5>PEGASUS_DISABLE_PERFINST</h5>
451 <ul>
452 <b>Description: </b>Builds a version of OpenPegasus that
453 disables support for gathering performance data.<br>
454 <b>Default Value: </b>Not Set<br>
455 <b>Recommended Value (Development Build): </b>Not Set<br>
456 <b>Recommended Value (Release Build): </b>Set<br>
457 <b>Required: </b>No<br>
458 <b>Considerations: </b>The CIM_ObjectManager.GatherStatisticalData
459 property is used to control statistic gathering. Once enabled,
460 statistical data can be viewed by retrieving instances of the
461 CIM_StatisticalData class. Support for gathering performance
462 data requires PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
463 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
464 to false), then PEGASUS_DISABLE_PERFINST must be set to
465 true. If PEGASUS_DISABLE_PERFINST is not defined or set to
466 false and PEGASUS_ENABLE_INTEROP_PROVIDER is not set,
467 PEGASUS_ENABLE_INTEROP_PROVIDER will be automatically enabled.
468 denise.eckstein 1.1 </ul>
|
469 kumpf 1.12
|
470 denise.eckstein 1.1 <h5>PEGASUS_DISABLE_PRIVILEGED_TESTS</h5>
471 <ul>
472 <b>Description: </b>This variable is used only in the development
|
473 kumpf 1.12 environment to restrict the level of testing performed by default.
474 If set, tests that require the CIM Server to run in a privileged
475 mode will not be run. Setting this variable allows
|
476 denise.eckstein 1.1 developers, without privileged access, to successfully run a
477 subset of the OpenPegasus test suit. This variable does
478 not affect CIM Server functionality. It merely controls
479 the level of testing.<br>
480 <b>Default Value: </b>Not Set<br>
481 <b>Recommended Value (Development Build): </b>Not Set<br>
482 <b>Recommended Value (Release Build): </b>Not Used<br>
483 <b>Required: </b>No<br>
484 <b>Considerations: </b>Enabling this variable will significantly
|
485 kumpf 1.12 reduce the testing of security related features (e.g.,
|
486 denise.eckstein 1.1 authentication and authorization) and can affect testing in other
487 areas.
488 </ul>
489
490 <h5>PEGASUS_DISABLE_PROV_USERCTXT</h5>
491 <ul>
492 <b>Description: </b>Builds a version of OpenPegasus that
493 disables supports for the Provider User Context feature.
494 This feature allows a Provider to choose the user context in
495 which it is invoked, including the ability to run in the context of
496 the user requesting an operation.<br>
497 <b>Default Value: </b>Set for Windows and OpenVMS, Not Set
498 for all other platforms<br>
499 <b>Recommended Value (Development Build): </b>Set for Windows and
500 OpenVMS, Not Set for all other platforms<br>
501 <b>Recommended Value (Release Build): </b>Set for Windows and
502 OpenVMS, Not Set for all other platforms<br>
503 <b>Required: </b>No<br>
504 <b>Considerations: </b>The Provider User Context feature may be
505 disabled by compiling with the PEGASUS_DISABLE_PROV_USERCTXT flag
506 defined. In this case, the Provider Registration Manager rejects
507 denise.eckstein 1.1 provider registration requests that specify a UserContext property
508 value. The user context in which providers run is then unchanged by
|
509 kumpf 1.12 this enhancement. Some platforms, such as OS/400 and z/OS may
|
510 denise.eckstein 1.1 define the PEGASUS_DISABLE_PROV_USERCTXT as part of the platform
511 configuration, since these platforms already set the provider user
512 context on a per-thread basis. When the Provider User Context
513 feature is enabled, support for each of the User Context types may
|
514 kumpf 1.12 be disabled individually. Provider registration fails when an
|
515 denise.eckstein 1.1 unsupported UserContext value is specified. Please refer to
|
516 kumpf 1.12 SecurityGuidelinesForDevelopers.html / PEP 223 for a discussion of
517 the rationale/advantages of user context providers to many
|
518 denise.eckstein 1.1 platforms.<br>
519 </ul>
520
|
521 s.kodali 1.20 <h5>PEGASUS_EXTRA_PROVIDER_LIB_DIR</h5>
522 <ul>
523 <b>Description: </b>Specifies the location of the extra provider
524 libraries which are part of the release builds.<br>
525 <b>Default Value: </b>Not Set<br>
526 <b>Recommended Value (Development Build): </b>
527 No Specific Recommendation<br>
528 <b>Recommended Value (Release Build): </b>
529 No Specific Recommendation<br>
530 <b>Required: </b> No.<br>
531 <b>Considerations: </b> Since providerDir config property is fixed
532 and hidden in release builds, this build time option provides facilty
533 to include the extra provider directories without any security problems.
534 This build time option is useful only when PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS
535 is set.
536 </ul>
537
|
538 denise.eckstein 1.1 <h5>PEGASUS_EMANATE_INCLUDE_DIR</h5>
539 <ul>
540 <b>Description: </b>Specifies the location of the EMANATE
541 <i>include</i> directory. <br>
542 <b>Default Value: </b>Not Set<br>
543 <b>Recommended Value (Development Build): </b>
544 No Specific Recommendation<br>
545 <b>Recommended Value (Release Build): </b>
546 No Specific Recommendation<br>
547 <b>Required: </b>No. By default, the EMANATE include files
548 are expected to be installed in directories that are searched by
549 default (e.g., /usr/include). For platforms where this isn't true,
|
550 kumpf 1.12 the PEGASUS_EMANATE_INCLUDE_DIR environment variable may be used to
551 define an alternative path. This environment variable is only used
|
552 denise.eckstein 1.1 if PEGASUS_USE_EMANATE is set.<br>
|
553 kumpf 1.12 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
|
554 denise.eckstein 1.1 for additional details.<br>
555 </ul>
556
557 <h5>PEGASUS_EMANATE_LIB_DIR</h5>
558 <ul>
559 <b>Description: </b>Specifies the location of the EMANATE
560 <i>lib</i> directory. <br>
561 <b>Default Value: </b>Not Set<br>
562 <b>Recommended Value (Development Build): </b>
563 No Specific Recommendation<br>
564 <b>Recommended Value (Release Build): </b>
565 No Specific Recommendation<br>
|
566 kumpf 1.12 <b>Required: </b>No. By default, the EMANATE libraries are
567 expected to be installed in directories that are searched by
568 default (e.g., /usr/lib, /usr/lib64). For platforms where this
|
569 denise.eckstein 1.1 isn't true, the PEGASUS_EMANATE_LIB_DIR environment variable may
570 be used to define an alternative path. This environment variable
571 is only used if PEGASUS_USE_EMANATE is set.<br>
572 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
573 for additional details.<br>
574 </ul>
575
576 <h5>PEGASUS_ENABLE_AUDIT_LOGGER</h5>
577 <ul>
578 <b>Description: </b>When this variable is set to false, support
579 for audit logging will NOT be built into OpenPegasus. If this
580 variable is set to true, or not set, support for audit logging
581 will be included in the build. All other values are invalid.<br>
582 <b>Default Value: </b>true<br>
583 <b>Recommended Value (Development Build): </b>true<br>
584 <b>Recommended Value (Release Build): </b>true<br>
585 <b>Required: </b>No<br>
586 </ul>
587
588
589 <h5>PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER</h5>
590 denise.eckstein 1.1 <ul>
591 <b>Description: </b>If set to true, a version of OpenPegasus
592 that supports CMPI providers and their dependent components is
593 built. If this variable is not set or set to false, support
594 for CMPI providers will not be included. <br>
595 <b>Default Value: </b>true for Linux and OpenVMS, false for
596 other platforms<br>
|
597 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (Linux
|
598 denise.eckstein 1.1 Platform Only)<br>
599 <b>Recommended Value (Release Build): </b>true (Linux Platform
600 Only)<br>
601 <b>Required: </b>No</p>
602 </ul>
603
604 <h5>PEGASUS_ENABLE_COMPRESSED_REPOSITORY</h5>
605 <ul>
606 <b>Description: </b>If set the Repository Compression logic is
607 built and enabled and compressed and non compressed repositories
608 are supported. If not set then compressed repositories are not
609 supported.<br>
610 <b>Default Value: </b>Not Set<br>
611 <b>Recommended Value (Development Build): </b>Not Set<br>
612 <b>Recommended Value (Release Build): </b>Not Set<br>
613 <b>Required: </b>No<p>
|
614 kumpf 1.12 <b>Considerations: </b>See
|
615 denise.eckstein 1.1 pegasus/readme.compressed_repository</p>
616 </ul>
617
618
619 <h5>PEGASUS_ENABLE_CQL</h5>
620 <ul>
621 <b>Description: </b>When this variable is set to false, support
622 for Indication Subscription filters that have CQL as the language
623 is disabled. It does not remove CQL from the build.<br>
624 <b>Default Value:</b> Not Set<br>
625 <b>Recommended Value (Development Build):</b> Not Set<br>
626 <b>Recommended Value (Release Build):</b> false<br>
627 <b>Required: </b>No<br>
|
628 kumpf 1.12 <b>Considerations: </b>The DMTF CIM Query Language
629 Specification is Preliminary and subject to backward incompatible
630 changes.
|
631 denise.eckstein 1.1 </ul>
632
633 <h5>PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT</h5>
634 <ul>
635 <b>Description: </b>When this variable is set to true, support the
636 DMTF Indications Profile (DSP1054) is included in OpenPegasus.
637 If this variable is not set or set to false, support for the DMTF
638 Indications Profile will not be included.<br>
639 <b>Default Value:</b> Not Set<br>
640 <b>Recommended Value (Development Build):</b> Not Set<br>
641 <b>Recommended Value (Release Build):</b> Not Set<br>
642 <b>Required: </b>No<br>
643 <b>Considerations: </b>The implementation of this feature is
644 based on a preliminary version of the DMTF Indications Profile,
645 DSP1053, and subject to change. If this variable is enabled,
|
646 kumpf 1.12 two DMTF experimental class definitions, CIM_IndicationService and
647 CIM_IndicationServiceCapabilities, will be added to the
|
648 denise.eckstein 1.1 root/PG_InterOp namespace. Experimental class definitions are
649 subject to change.
|
650 kumpf 1.12 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT requires
|
651 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled.
652 If PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
653 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT to true, will also
654 enable PEGASUS_ENABLE_INTEROP_PROVIDER. If
655 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
656 to false), a build error will be generated.
657 </ul>
658
659 <h5>PEGASUS_ENABLE_EXECQUERY</h5>
660 <ul>
661 <b>Description: </b>When this environment variable is set,
|
662 kumpf 1.12 processing of ExecQuery operations is enabled. When not set,
|
663 denise.eckstein 1.1 ExecQuery operation requests get a NotSupported response. (Note:
664 The PEGASUS_ENABLE_EXECQUERY environment variable controls
665 the definition of the PEGASUS_DISABLE_EXECQUERY compile macro.) <br>
666 <b>Default Value: </b>Not Set<br>
667 <b>Recommended Value (Development Build): </b>Not Set<br>
668 <b>Recommended Value (Release Build): </b>Not Set<br>
669 <b>Required: </b>No
670 </ul>
671
672 <h5>PEGASUS_ENABLE_EMAIL_HANDLER</h5>
673 <ul>
674 <b>Description: </b> When this environment variable is set, an
|
675 kumpf 1.12 E-Mail Indication Handler is built as part of the OpenPegasus
676 build. The E-Mail Indication Handler can be used to
|
677 denise.eckstein 1.1 delivered CIM Indications to a designated e-mail address.<br>
678 <b>Default Value: </b>Not Set<br>
679 <b>Recommended Value (Development Build): </b>Not Set<br>
680 <b>Recommended Value (Release Build): </b>Not Set<br>
681 <b>Required: </b>No<br>
682 <b>Considerations: </b>If PEGASUS_ENABLE_EMAIL_HANDLER is
683 not set when OpenPegasus is built, a request to create an Email
684 Indication Handler instance will be rejected will the error
685 CIM_ERR_NOT_SUPPORTED.
686 </ul>
687
688 <h5>PEGASUS_ENABLE_GCOV</h5>
689 <ul>
690 <b>Description: </b>GCOV,
691 <a href="http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov">
692 http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov</a>, is a
693 code coverage utility. If PEGASUS_ENABLE_GCOV is set,
694 GCC will instrument the code to support analysis by GCOV.<br>
695 <b>Default Value: </b>Not Set<br>
696 <b>Recommended Value (Development Build): </b>
697 Not Set<br>
698 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
699 <b>Required: </b>No<br><b>Considerations: </b>
700 This flag is currently only supported with GCC on Linux.
701 <ul>
|
702 kumpf 1.12 Note: LCOV, <a href=
|
703 denise.eckstein 1.1 "http://ltp.sourceforge.net/coverage/lcov.php">
|
704 kumpf 1.12 http://ltp.sourceforge.net/coverage/lcov.php</a>, is a
|
705 denise.eckstein 1.1 graphical front-end extension for GCOV. It collects GCOV data
706 for multiple source files and creates HTML pages with coverage
|
707 kumpf 1.12 information. You can use the following steps to use LCOV to
|
708 denise.eckstein 1.1 analyze OpenPegasus GCOV data.
709 <ol>
710 <li>Set PEGASUS_ENABLE_GCOV = true.</li>
|
711 kumpf 1.12 <li>Build and test OpenPegasus (e.g.,
712 <i>make -f pegasus/TestMakefile build
|
713 denise.eckstein 1.1 alltests</i>).</li>
714 <li>For each source directory,
715 <ul>
716 <li>copy the .gcda and .gcno files from the object
|
717 kumpf 1.12 directory to the source directory (e.g.,
718 <i>cp build/obj/Pegasus/Common/*.gcda
|
719 denise.eckstein 1.1 src/Pegasus/Common/</i>);</li>
|
720 kumpf 1.12 <li>execute the <b>lcov</b> command
721 (e.g.,
|
722 denise.eckstein 1.1 <i>lcov --directory src/Pegasus/Common/ --capture
723 --output-file result.info</i>) to build the result.info
724 file; and finally,</li>
725 <li>use the <b>genhtml</b> command to generate the .html
726 output (e.g., <i>genhtml result.info</i>). The
727 top .html file is named index.html.</li>
728 </ul>
729 </ol>
730 </ul>
731 </ul>
|
732 kumpf 1.12
|
733 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INDICATION_COUNT</h5>
734 <ul>
|
735 kumpf 1.12 <b>Description: </b>If true, the CIM
|
736 denise.eckstein 1.1 Server will be built to count the number of CIM indications
737 generated by providers and matched with subscriptions. If false
738 or not set, indication statistic support will not be included.
739 <b>Default Value: </b>true<br>
740 <b>Recommended Value (Development Build): </b>true <br>
741 <b>Recommended Value (Release Build): </b>true <br>
742 <b>Required: </b>No <br>
743 <b>Considerations: </b>The number of CIM indications generated by
744 providers and matched with subscriptions is stored in hash tables
745 which causes memory usage to increase by 4 bytes for each
746 active subscription and by about 400 bytes for each active
747 indication provider.<br>
748 </ul>
749
|
750 mike 1.10 <h5>PEGASUS_ENABLE_PROTOCOL_BINARY</h5>
751 <ul>
752 <b>Description: </b>If true, OpenPegasus uses a faster binary
|
753 karl 1.24.2.1 protocol between local clients and the CIM server. If false, OpenPegasus
754 uses the conventional XML-based protocol instead.
755 See PEP#340 for more details.
|
756 mike 1.10 <br>
757 <b>Default Value: </b>false<br>
758 <b>Recommended Value (Development Build): </b>false<br>
759 <b>Recommended Value (Release Build): </b>false<br>
760 <b>Required: </b>No<br>
761 <b>Considerations: </b>This option improves performance by using a faster
762 binary protocol between local clients and the CIM server.
|
763 mike 1.8 <br>
764 </ul>
765
|
766 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INTEROP_PROVIDER</h5>
767 <ul>
768 <b>Description: </b>If true, the OpenPegasus Interop Provider
769 will be build. If false or not set, the OpenPegasus Interop
770 Provider will not be built.<br>
771 <b>Default Value: </b>Not Set<br>
772 <b>Recommended Value (Development Build): </b>Not Set<br>
773 <b>Recommended Value (Release Build): </b>false<br>
774 <b>Required: </b>No <br>
775 <b>Considerations: </b> A number of features controlled by
776 OpenPegasus build options are dependent on the Interop
|
777 kumpf 1.12 Provider. Please refer to PEGASUS_ENABLE_SLP,
778 PEGASUS_DISABLE_PERFINST, and
|
779 denise.eckstein 1.1 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT for additional
780 details.<br>
781 </ul>
782
783 <h5>PEGASUS_ENABLE_IPV6</h5>
784 <ul>
785 <b>Description: </b>This variable can be used to specify
786 whether IPv6 support should be included in OpenPegasus.<br>
787 <b>Default Value: </b>true<br>
788 <b>Recommended Value (Development Build): </b>true<br>
789 <b>Recommended Value (Release Build): </b>true<br>
790 <b>Required: </b>No<br>
791 <b>Considerations: </b>When this variable is set to
792 'false', support for IPv6 socket APIs and structures is disabled,
|
793 kumpf 1.12 and the CIM Server will not accept connections to or from IPv6
|
794 denise.eckstein 1.1 network interfaces. When this variable is set to 'true', the
|
795 kumpf 1.12 newer IPv6 socket APIs and structures will be included when
796 OpenPegasus is built, so they must be supported on the build
797 platform. However, if IPv6 is not supported on the platform on
|
798 denise.eckstein 1.1 which an IPv6-enabled version of OpenPegasus is run, then the IPv6
799 feature will be disabled at run-time and only IPv4 connections
800 will be supported.
801 </ul>
802
803 <h5>PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER</h5>
804 <ul>
805 <b>Description: </b>If true, a version of OpenPegasus that
806 supports JMPI providers and their dependent components is built.
807 If false or not set, support for JMPI Providers is not included
808 in OpenPegasus. All other values are invalid.<br>
809 <b>Default Value: </b>false<br>
810 <b>Recommended Value (Development Build): </b>false<br>
811 <b>Recommended Value (Release Build): </b>false<br>
812 <b>Required: </b>No</p>
813 </ul>
814
815 <h5>PEGASUS_ENABLE_OBJECT_NORMALIZATION</h5>
816 <ul>
|
817 kumpf 1.12 <b>Description: </b>If set, builds in support so that objects
818 returned from provider instance operations can be validated.
|
819 denise.eckstein 1.1 The enableNormalization must also be set to 'true' (default)<br>
820 <b>Default Value: </b>Not Set<br>
821 <b>Recommended Value (Development Build): </b>Not Set<br>
822 <b>Recommended Value (Release Build): </b>Not Set<br>
823 <b>Required: </b>No <br>
824 <b>Considerations: </b>If PEGASUS_ENABLE_OBJECT_NORMALIZATION is
825 set, two new configuration options are defined: enableNormalization
826 and excludeModulesFromNormalization.
827 </ul>
828
829 <h5>PEGASUS_ENABLE_PRIVILEGE_SEPARATION</h5>
830 <ul>
831 <b>Description: </b>If true, a version of OpenPegasus that
832 enables the Privilege Separation feature is built. This feature
833 allows the CIM Server to run in a non-privileged user context and
|
834 kumpf 1.12 use a small executor process to perform privileged operations. If
835 false or not set, the Privilege Separate feature will not be
|
836 denise.eckstein 1.1 included.<br>
837 <b>Default Value: </b>false<br>
|
838 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (HP-UX,
|
839 denise.eckstein 1.1 Linux)<br>
840 <b>Recommended Value (Release Build): </b>true (HP-UX,
841 Linux)<br>
842 <b>Required: </b>No<br>
843 <b>Considerations: </b> The Privilege Separation feature is
844 only supported on HP-UX and Linux platforms. The 'cimsrvr' user
845 must be defined on the system. If the umask setting in the
846 environment is not 0, PEGASUS_TMP must be set to a directory that
|
847 kumpf 1.12 is writable by the 'cimsrvr' user for the tests to run
|
848 denise.eckstein 1.1 successfully.
849 </ul>
850
851 <h5>PEGASUS_ENABLE_PROTOCOL_WSMAN</h5>
852 <ul>
853 <b>Description: </b>If true, a version of OpenPegasus is
854 built that accepts and processes WS-Management requests. This
|
855 kumpf 1.5 feature is initially limited to WS-Transfer and WS-Enumeration
856 operations. If false or not set, WS-Management support is not
857 built or included in any way.<br>
|
858 denise.eckstein 1.1 <b>Default Value: </b>false<br>
859 <b>Recommended Value (Development Build): </b>true<br>
860 <b>Recommended Value (Release Build): </b>false<br>
861 <b>Required: </b>No<br>
862 <b>Considerations: </b> The WS-Management standards are not
863 mature, and interoperability problems may arise. The WS-Management
|
864 kumpf 1.12 functionality may change in incompatible ways in subsequent
|
865 denise.eckstein 1.1 releases. Also note the known limitations specified in PEP 311.<br>
866 </ul>
867
868 <h5>PEGASUS_ENABLE_REMOTE_CMPI</h5>
869 <ul>
870 <b>Description: </b>If set, a version of OpenPegasus that
871 support Remote CMPI providers and their dependent components
872 is built.<br>
873 <b>Default Value: </b>Not Set<br>
874 <b>Recommended Value (Development Build): </b>Not Set<br>
875 <b>Recommended Value (Release Build): </b>Not Set<br>
876 <b>Required: </b>No</p>
877 </ul>
878
879 <h5>PEGASUS_ENABLE_SLP</h5>
880 <ul>
881 <b>Description: </b>This variable controls of the inclusion
882 of SLP functionality in the OpenPegasus build. When this
883 environment variable is set to 'true', SLP functionality will be
|
884 kumpf 1.12 included as part of the OpenPegasus build. If
|
885 denise.eckstein 1.1 this variable is set to 'false' or not set, the SLP functionality
886 will not be included. All other values are considered
887 invalid and will result in a build error
888 (e.g., "PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid,
889 must be true or false").<br>
890 <b>Default Value: </b>'true' for Windows; 'false' for all other
891 Platforms<br>
892 <b>Recommended Value (Development Build): </b>'true' for
893 Windows; 'false' for all other Platforms<br>
894 <b>Recommended Value (Release Build): </b><br>
895 <b>Required: </b>No<br>
896 <b>Considerations: </b>PEGASUS_ENABLE_SLP requires
897 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
|
898 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
|
899 denise.eckstein 1.1 PEGASUS_ENABLE_SLP to true, will also enable
|
900 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER. If
|
901 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled
902 (i.e., set to false), a build error will be generated.<br>
903 </ul>
904
905
906 <h5>PEGASUS_ENABLE_SORTED_DIFF</h5>
907 <ul>
|
908 kumpf 1.12 <b>Description: </b>This controls if the DIFFSORT function
909 is used rather than a simple DIFF of the test results files
910 to the static results file. Set to 'true' enables the sorted
911 diffs of results to static results files. Otherwise results
912 in regular diffs of results to static results files.
913 See OpenPegasus bug 2283 for background information concerning
|
914 denise.eckstein 1.1 this config variable. <br>
915 <b>Default Value: </b>true<br>
916 <b>Recommended Value (Development Build): </b>true<br>
917 <b>Recommended Value (Release Build): </b>true<br>
918 <b>Required: </b>No<p> </p>
919 </ul>
920
921 <h5>PEGASUS_ENABLE_SYSTEM_LOG_HANDER</h5>
922 <ul>
923 <b>Description: </b>When this environment variable is set, a
|
924 kumpf 1.12 SysLog Indication Handler is built as part of the OpenPegasus
925 build. The SysLog Indication Handler can be used to
|
926 denise.eckstein 1.1 delivered CIM Indications to the system log file.<br>
927 <b>Default Value: </b>Not Set<br>
928 <b>Recommended Value (Development Build): </b>Not Set<br>
929 <b>Recommended Value (Release Build): </b>Not Set<br>
930 <b>Required: </b>No<br>
|
931 kumpf 1.12 <b>Considerations: </b>If PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
|
932 denise.eckstein 1.1 is not set when OpenPegasus is built, a request to create a SysLog
|
933 kumpf 1.12 Indication Handler instance will be rejected with the error
|
934 denise.eckstein 1.1 CIM_ERR_NOT_SUPPORTED.<br>
935 </ul>
936
937 <h5>PEGASUS_ENABLE_SSLV2</h5>
938 <ul>
939 <b>Description: </b>By default, support for the SSLV2 protocol
|
940 kumpf 1.12 is disabled in OpenPegasus. The option can be used to build a
|
941 denise.eckstein 1.1 version of OpenPegasus that supports SSLV2. This variable affects
942 how SSL contexts are constructed for both the CIM Server and CIM
943 Clients.<br>
944 <b>Default Value: </b>Not Set<br>
945 <b>Recommended Value (Development Build): </b>Not Set<br>
946 <b>Recommended Value (Release Build): </b>Not Set<br>
947 <b>Required: </b>No<br>
948 <b>Considerations:</b> Unless SSLV2 is required for backward
949 compatibility, enabling this protocol is not recommended (SSLV3
950 or later is preferred).
951 </ul>
952
953 <h5>PEGASUS_ENABLE_USERGROUP_AUTHORIZATION</h5>
954 <ul>
|
955 kumpf 1.12 <b>Description: </b>Builds a version of OpenPegasus that
|
956 denise.eckstein 1.1 allows an administrator to restrict access to CIM operations
957 to members of a designated set of groups. Refer to the
958 <b>authorizedUserGroups</b>configuration option for additional
959 details.<br>
960 <b>Default Value: </b>Not Set<br>
961 <b>Recommended Value (Development Build): </b>Not Set<br>
962 <b>Recommended Value (Release Build): </b>Set<br>
963 <b>Required: </b>No<br>
964 </ul>
965
966 <h5>PEGASUS_EXTRA_C_FLAGS</h5>
967 <ul>
|
968 kumpf 1.12 <b>Description: </b>This environment variable allows a
969 developer to specify an additional set of flags to be included
|
970 denise.eckstein 1.1 on the C compile command line.<br>
971 <b>Default Value: </b>Not Set<br>
972 <b>Recommended Value (Development Build): </b>No Set<br>
973 <b>Recommended Value (Release Build): </b>Not Set<br>
974 <b>Required: </b>No
975 </ul>
976
977 <h5>PEGASUS_EXTRA_CXX_FLAGS</h5>
978 <ul>
|
979 kumpf 1.12 <b>Description: </b>This environment variable allows a
|
980 denise.eckstein 1.1 developer to specify an additional set of flags to be included
981 on the C++ compile command line.<br>
982 <b>Default Value: </b>Not Set<br>
983 <b>Recommended Value (Development Build): </b>Not Set<br>
984 <b>Recommended Value (Release Build): </b>Not Set<br>
985 <b>Required: </b>No
986 </ul>
987
988 <h5>PEGASUS_EXTRA_LIBRARY_LINK_FLAGS</h5>
989 <ul>
990 <b>Description: </b>This environment variable allows a
|
991 kumpf 1.12 developer to specify an additional set of flags to include on
|
992 denise.eckstein 1.1 the link command line used to build a library.<br>
993 <b>Default Value: </b>Not Set<br>
994 <b>Recommended Value (Development Build): </b>Not Set<br>
995 <b>Recommended Value (Release Build): </b>Not Set<br>
996 <b>Required: </b>No
997 </ul>
998
999 <h5>PEGASUS_EXTRA_LINK_FLAGS</h5>
1000 <ul>
1001 <b>Description: </b>This environment variable allows a
1002 developer to specify an additional set of flags to be included
1003 on the link command line. These flags will be included on
1004 both library and program executable link command lines.<br>
1005 <b>Default Value: </b>Not Set<br>
1006 <b>Recommended Value (Development Build): </b>Not Set<br>
1007 <b>Recommended Value (Release Build): </b>Not Set<br>
1008 <b>Required: </b>No
|
1009 kumpf 1.12 <b>Considerations: </b>Refer to PEGASUS_EXTRA_LIBRARY_LINK_FLAGS and
|
1010 denise.eckstein 1.1 PEGASUS_EXTRA_PROGRAM_FLAGS to add flags specific to either a
1011 library or program link command line.<br>
1012 </ul>
1013
1014 <h5>PEGASUS_EXTRA_PROGRAM_LINK_FLAGS</h5>
1015 <ul>
1016 <b>Description: </b>This environment variable allows a
1017 developer to specify an additional set of flags to include on
1018 the link command line used to build an executable program.<br>
1019 <b>Recommended Value (Development Build): </b>Not Set<br>
1020 <b>Recommended Value (Release Build): </b>Not Set<br>
1021 <b>Required: </b>No
1022 </ul>
1023
1024 <h5>PEGASUS_HAS_MESSAGES</h5>
1025 <ul>
|
1026 kumpf 1.12 <b>Description: </b>When set (to anything) during the build,
1027 OpenPegasus compiles with localization support. The
1028 ICU (International Components for Unicode) variables,
1029 ICU_ROOT and ICU_INSTALL, indicate that the
1030 localization support is based on ICU. Only ICU is supported
|
1031 denise.eckstein 1.1 at this time.<br>
1032 <b>Default Value: </b>Not Set<br>
1033 <b>Recommended Value (Development Build): </b>Not Set<br>
1034 <b>Recommended Value (Release Build): </b>Not Set<br>
1035 <b>Required: </b>No<br>
1036 <b>Considerations: </b>If the PEGASUS_HAS_MESSAGES is not
1037 set, OpenPegasus is built without localization support. This
1038 means that all messages sent by the CIM Server and the CLIs are in
1039 English. ICU is an open source project at
1040 <a href="http://oss.software.ibm.com/icu">
|
1041 kumpf 1.12 http://oss.software.ibm.com/icu</a>.
|
1042 denise.eckstein 1.1 Only English translations are included with the OpenPegasus
1043 distribution. The OpenPegasus distribution does not provide
1044 translated messages. But, enabling for ICU would allow vendor to
1045 provide the translations. Refer to the OpenPegasus Release README
1046 for additional information regarding the use of ICU. Although, in
|
1047 kumpf 1.12 OpenPegasus 2.3.2, experience with localization support
1048 has been limited to a select set of platforms, wider platform
|
1049 denise.eckstein 1.1 adoption of this technology is planned for 2.5.<br>
1050 </ul>
1051
1052 <h5>PEGASUS_HAS_SSL</h5>
1053 <ul>
1054 <b>Description: </b>If set, a version of OpenPegasus that
1055 supports SSL (i.e., https) is built.<br>
1056 <b>Default Value: </b>Not Set<br>
1057 <b>Recommended Value (Development Build): </b>Set<br>
1058 <b>Recommended Value (Release Build): </b>Set<br>
1059 <b>Required: </b>No<br>
|
1060 kumpf 1.12 <b>Considerations: </b>Support for SSL in OpenPegasus is
1061 dependent on the OpenSSL software developed by the
|
1062 denise.eckstein 1.1 <a href="http://www.openssl.org/">
|
1063 kumpf 1.12 OpenSSL Project (http://www.openssl.org/)</a>.
|
1064 denise.eckstein 1.1
1065 If the PEGASUS_HAS_SSL variable is set, the variable OPENSSL_HOME
1066 must also be defined. The OPENSSL_HOME variable is used, by the
|
1067 kumpf 1.12 OpenPegasus build, to determine the location of the OpenSSL
|
1068 denise.eckstein 1.1 include files, libraries and binaries.
1069 </ul>
1070
1071 <h5>PEGASUS_HOME</h5>
1072 <ul>
1073 <b>Description: </b>Specifies the location of the
1074 OpenPegasus working directory. The OpenPegasus
|
1075 kumpf 1.12 build will use this directory as the default location
|
1076 denise.eckstein 1.1 for files generated during the build (e.g., binaries,
1077 libraries, objects).<br>
1078 <b>Default Value: </b>None<br>
1079 <b>Recommended Value (Development Build): </b>
1080 No Specific Recommendation<br>
1081 <b>Recommended Value (Release Build): </b>
1082 No Specific Recommendation<br>
1083 <b>Required: </b>Yes<br>
1084 <b>Considerations: </b>The error "PEGASUS_HOME
1085 environment variable undefined" is returned if the
|
1086 kumpf 1.12 PEGASUS_HOME environment variable is not set.
|
1087 denise.eckstein 1.1 This variable is also used during runtime. Refer to the section
1088 titled "Environment Variable Settings for Running OpenPegasus
1089 2.3.2 on Linux" for additional details.<br>
1090 </ul>
1091
1092 <h5>PEGASUS_INDICATIONS_Q_THRESHOLD</h5>
1093 <ul>
1094 <b>Description: </b>Controls if indications providers are stalled
1095 if the indications service queue is too large. It can be set
|
1096 kumpf 1.12 to any positive value. If not set providers are never
1097 stalled. This implies that the indications service
|
1098 denise.eckstein 1.1 queue may become as large as necessary to hold all the
|
1099 kumpf 1.12 indications generated. If set to any value then
|
1100 denise.eckstein 1.1 providers are stalled by forcing them to sleep when they
1101 try to deliver an indication and the indications service
1102 queue exceeds this value. They are resumed when the queue
1103 count falls 10 percent below this value. Stall and resume log
1104 entries are made to inform the administrator the condition has
1105 occurred.<br>
1106 <b>Default Value: </b>Not Set<br>
1107 <b>Recommended Value (Development Build): </b>Not Set<br>
1108 <b>Recommended Value (Release Build): </b>Not Set<br>
1109 <b>Required: </b>No<br>
1110 <b>Considerations: </b>Use of this setting may have
1111 unintended side-effects when using Out-of-Process Providers
1112 including delayed processing of CIM Operation Requests.
1113 </ul>
1114
1115 <h5>PEGASUS_MAX_THREADS_PER_SVC_QUEUE</h5>
1116 <ul>
1117 <b>Description: </b>Controls the maximum number of threads
1118 allowed per message service queue. It is allowed to range
1119 between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT (currently 5000)
|
1120 kumpf 1.12 as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
|
1121 denise.eckstein 1.1 If set to 0 (zero) the max threads per service queue is then
1122 set to MAX_THREADS_PER_SVC_QUEUE_LIMIT. If set larger than the
|
1123 kumpf 1.12 MAX_THREADS_PER_SVC_QUEUE_LIMIT it is set equal to
|
1124 denise.eckstein 1.1 MAX_THREADS_PER_SVC_QUEUE_LIMIT. There are no other limits on the
1125 total number of threads that can exist within the system at this
|
1126 kumpf 1.12 time. When the server starts there on the order of 10 to 20
1127 message service queues created dependent upon
|
1128 denise.eckstein 1.1 build options. <br>
1129 <b>Default Value: </b>5<br>
1130 <b>Recommended Value (Development Build): </b>5<br>
1131 <b>Recommended Value (Release Build): </b>5<br>
1132 <b>Required: </b>No<br>
1133 <b>Considerations: </b>This flag affects consumption of
1134 system resources. Not setting, or inappropriately setting
1135 this value, may cause the cimserver to hang or crash.<br>
1136 </ul>
1137
1138 <h5>PEGASUS_ROOT</h5>
1139 <ul>
1140 <b>Description: </b>Specifies the location of the directory
1141 that corresponds to "pegasus" source directory defined in the
|
1142 kumpf 1.12 OpenPegasus CVS source tree. This environment variable is
1143 used by the OpenPegasus build to locate the required build
1144 and source files (e.g., $(PEGASUS_ROOT)/mak and
1145 $(PEGASUS_ROOT)/src).<br>
|
1146 denise.eckstein 1.1 <b>Default Value: </b>None<br>
1147 <b>Recommended Value (Development Build): </b>
1148 No Specific Recommendation<br>
1149 <b>Recommended Value (Release Build): </b>
1150 No Specific Recommendation<br>
1151 <b>Required: </b>Yes<br>
1152 <b>Considerations: </b>The error "PEGASUS_ROOT environment
1153 variable undefined" is returned if the PEGASUS_ROOT
1154 environment variable is not set.
1155 </ul>
1156
1157
1158 <h5>PEGASUS_NET_SNMP_INCLUDE_DIR</h5>
1159 <ul>
1160 <b>Description: </b>Specifies the location of the NET-SNMP
1161 <i>include</i> directory. <br>
1162 <b>Default Value: </b>Not Set<br>
1163 <b>Recommended Value (Development Build): </b>
1164 No Specific Recommendation<br>
1165 <b>Recommended Value (Release Build): </b>
1166 No Specific Recommendation<br>
1167 denise.eckstein 1.1 <b>Required: </b>No. By default, the NET-SNMP include
1168 files are expected to be installed in directories that
1169 are searched by default (e.g., /usr/include). For platforms
|
1170 kumpf 1.12 where this isn't true, the PEGASUS_NET_SNMP_INCLUDE_DIR
|
1171 denise.eckstein 1.1 environment variable may be used to define an alternative path.
1172 This environment variable is only used if PEGASUS_USE_NET_SNMP
1173 is set.<br>
1174 </ul>
1175
1176 <h5>PEGASUS_NET_SNMP_LIB_DIR</h5>
1177 <ul>
1178 <b>Description: </b>Specifies the location of the NET-SNMP
1179 <i>lib </i>directory. <br>
1180 <b>Default Value: </b>Not Set<br>
1181 <b>Recommended Value (Development Build): </b>
1182 No Specific Recommendation<br>
1183 <b>Recommended Value (Release Build): </b>
1184 No Specific Recommendation<br>
1185 <b>Required: </b>No. By default, the NET-SNMP library is
|
1186 kumpf 1.12 expected to be installed in a directory that is searched by
1187 default (e.g., /usr/lib, /usr/lib64). For platforms where
|
1188 denise.eckstein 1.1 this isn't true, the PEGASUS_NET_SNMP_LIB_DIR environment
1189 variable may be used to define an alternative path. This
1190 environment variable is only used if PEGASUS_USE_NET_SNMP is set.
1191 </ul>
1192
1193
1194 <h5>PEGASUS_NOASSERTS</h5>
1195 <ul>
1196 <b>Description: </b>Defines the NDEBUG compilation macro, which
1197 causes the preprocessor to remove PEGASUS_ASSERT() statements.<br>
1198 <b>Default Value: </b>Not Set<br>
1199 <b>Recommended Value (Development Build): </b>Not Set<br>
1200 <b>Recommended Value (Release Build): </b>Set<br>
1201 <b>Required: </b>No<br>
1202 </ul>
1203
1204 <h5>PEGASUS_OPENSLP_HOME</h5>
1205 <ul>
|
1206 kumpf 1.12 <b>Description: </b>Specifies the location of the OpenSLP
|
1207 denise.eckstein 1.1 SDK directory. This directory must contain the OpenSLP
1208 <i>include</i> directory, $(PEGASUS_OPENSLP_HOME)/include,
1209 and the OpenSLP <i>library</i> directory,
1210 $(PEGASUS_OPENSLP_HOME)/lib.<br>
1211 <b>Default Value: </b>Not Set<br>
1212 <b>Recommended Value (Development Build): </b>
1213 No Specific Recommendation<br>
1214 <b>Recommended Value (Release Build): </b>
1215 No Specific Recommendation<br>
1216 <b>Required: </b>No. If not set, no additional include or
1217 library search paths will be included.
1218 <b>Considerations: </b>This value is not used if PEGASUS_USE_OPENSLP
1219 is not defined. <br>
1220 </ul>
1221
1222 <h5>PEGASUS_PAM_AUTHENTICATION</h5>
1223 <ul>
|
1224 kumpf 1.12 <b>Description: </b>Enables support for PAM-(Pluggable
|
1225 denise.eckstein 1.1 Authentication Modules) based authentication.<br>
1226 <b>Default Value: </b>Not Set<br>
1227 <b>Recommended Value (Development Build): </b>Set<br>
1228 <b>Recommended Value (Release Build): </b>Set<br>
1229 <b>Required: </b>No<br>
1230 <b>Considerations: </b>Support for PAM in OpenPegasus is
1231 dependent on platform support for PAM.<br>
1232 </ul>
1233
1234 <h5>PEGASUS_PLATFORM</h5>
1235 <ul>
1236 <b>Description: </b>Describes the target platform for the
|
1237 kumpf 1.12 build. The list of supported values for this variable
1238 is defined in pegasus/mak/config.mak. Please refer to
|
1239 denise.eckstein 1.1 that file for a complete list of valid PEGASUS_PLATFORM
1240 values. This document includes platform-specific configuration
|
1241 kumpf 1.12 data for only a subset of the supported platforms. The
|
1242 denise.eckstein 1.1 following table describes the platforms documented in
1243 this version of the document. <br>
1244 <b>Default Value: </b>None<p> </p>
1245 <table border="1" cellspacing="1" bordercolordark="#666666"
1246 bordercolorlight="#CCCCCC" width=542
1247 style='font-size=10.0pt;font-family:Arial'>
1248 <tr>
1249 <th bgcolor="#CAE6CA" width="190">Platform</th>
1250 <th bgcolor="#CAE6CA" width=351>Recommended Value <br>
1251 Development Build</th>
1252 <th bgcolor="#CAE6CA" width=338>Recommended Value <br>
1253 Release Build</th>
1254 </tr>
1255 <tr align="center">
1256 <td width="190" align="left">Linux IA32</td>
1257 <td width="351">LINUX_IX86_GNU</td>
1258 <td width="338">LINUX_IX86_GNU</td>
1259 </tr>
1260 <tr align="center">
1261 <td width="190" align="left">Linux IA64</td>
1262 <td width="351">LINUX_IA64_GNU</td>
1263 denise.eckstein 1.1 <td width="338">LINUX_IA64_GNU</td>
1264 </tr>
1265 <tr align="center">
1266 <td width="190" align="left">Linux X86_64</td>
1267 <td width="351">LINUX_X86_64_GNU</td>
1268 <td width="338">LINUX_X86_64_GNU</td>
1269 </tr>
1270 <tr align="center">
1271 <td width="190" align="left">HP-UX PA-RISC</td>
1272 <td width="351">HPUX_PARISC_ACC</td>
1273 <td width="338">HPUX_PARISC_ACC</td>
1274 </tr>
1275 <tr align="center">
1276 <td width="190" align="left">HP-UX IPF</td>
1277 <td width="351">HPUX_IA64_ACC</td>
1278 <td width="338">HPUX_IA64_ACC</td>
1279 </tr>
1280 <tr align="center">
1281 <td width="190" align="left">OpenVMS Alpha</td>
1282 <td width="351">VMS_ALPHA_DECCXX</td>
1283 <td width="338">VMS_ALPHA_DECCXX</td>
1284 denise.eckstein 1.1 </tr>
1285 <tr align="center">
1286 <td width="190" align="left">OpenVMS IA64</td>
1287 <td width="351">VMS_IA64_DECCXX</td>
1288 <td width="338"> VMS_IA64_DECCXX</td>
1289 </tr>
1290 </table>
1291 <br><br>
1292 <b>Required: </b>Yes<br>
|
1293 kumpf 1.12 <b>Considerations: </b>The error "PEGASUS_PLATFORM
1294 environment variable undefined." is returned if the
|
1295 denise.eckstein 1.1 PEGASUS_PLATFORM environment variable is not set.
1296 </ul>
1297
1298 <h5>PEGASUS_REMOVE_METHODTRACE</h5>
1299 <ul>
1300 <b>Description: </b>If true, the CIM Server is compiled without
1301 method enter and exit trace statements. Trace Level 5 will
1302 continue to be accepted as a valid trace level but, without the
1303 method enter and exit trace statements, it will be equivalent to
|
1304 kumpf 1.12 Trace Level 4. If PEGASUS_REMOVE_METHODTRACE is false or not set,
|
1305 denise.eckstein 1.1 method enter and exit trace statements are included. All
1306 other values are considered invalid and will result in a build
1307 error.<br>
1308 <b>Default Value: </b>Not Set<br>
1309 <b>Recommended Value (Development Build): </b>Not Set (The
1310 Considerations section gives guidance on when a different
1311 decision would be made.)<br>
1312 <b>Recommended Value (Release Build): </b>Not Set (The
1313 Considerations section gives guidance on when a different
1314 decision would be made.)<br>
1315 <b>Required: </b>No<br>
1316 <b>Considerations: </b>This option completely removes the
|
1317 kumpf 1.12 method enter/exit trace statements from the generated object code.
1318 It defines the PEG_METHOD_ENTER and PEG_METHOD_EXIT macros
|
1319 denise.eckstein 1.1 to null statements. This helps to keep static code size small
1320 but reduces the serviceability of the CIM server.<br>
1321 </ul>
1322
1323
1324 <h5>PEGASUS_REPOSITORY_MODE</h5>
1325 <ul>
1326 <b>Description: </b>This variable defines the default mode
1327 used to create repositories that are constructed as part of the
1328 automated build tests. It does not affect the runtime
1329 environment. Valid values include: XML (causes
1330 the repository to be built in XML mode); BIN (causes
|
1331 kumpf 1.12 the repository to be built in binary mode). Use cimconfig to
|
1332 denise.eckstein 1.1 modify the runtime environment.<br>
1333 <b>Default Value: </b>XML<br>
1334 <b>Recommended Value (Development Build): </b>XML<br>
1335 <b>Recommended Value (Release Build): </b>XML<br>
1336 <b>Required: </b>No<p> </p>
1337 </ul>
1338
|
1339 kumpf 1.2 <h5>PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES</h5>
1340 <ul>
1341 <b>Description: </b>This variable defines the default contents of a
1342 class definition in the repository store when a new repository is created.
1343 Specifically, when set to true, propagated elements are included in a
1344 class definition in the persistent store. The contents of a class
1345 definition returned from the repository interface is not affected by this
1346 option.<br>
1347 <b>Default Value: </b>false<br>
1348 <b>Recommended Value (Development Build): </b>false<br>
1349 <b>Recommended Value (Release Build): </b>false<br>
1350 <b>Required: </b>No<p> </p>
1351 <b>Considerations: </b>A repository which stores complete class
1352 definitions does not allow modifications to non-leaf classes or changes
1353 to a superclass designation. Complete classes use more storage space,
1354 often twice as much as local (incomplete) classes. Class retrieval may
1355 be more expensive when local classes are stored. No specific mechanism
1356 is available to change this setting in an existing repository.<br>
1357 </ul>
1358
|
1359 denise.eckstein 1.1 <h5>PEGASUS_SLP_REG_TIMEOUT</h5>
1360 <ul>
1361 <b>Description: </b>Most SLP implementations allow a lifetime
1362 value to be specified in the registration sent to the SLP SA or
1363 DA. The PEGASUS_SLP_REG_TIMEOUT build variable allows a lifetime
1364 (ie. timeout) value to be specified on the SLP registration, with
1365 a 're-registration' being sent to SLP at the same specified
1366 timeout interval. The purpose of this lifetime or timeout value
|
1367 kumpf 1.12 is to avoid the accumulation of stale service information
|
1368 denise.eckstein 1.1 in the SA or DA.<br>
1369 <b>Default Value: </b>Undefined<br>
1370 <b>Recommended Value (Development Build): </b>Undefined<br>
1371 <b>Recommended Value (Release Build): </b>Undefined<br>
1372 <b>Required: </b>No<p><b>Example: </b>
1373 PEGASUS_SLP_REG_TIME=1440 (ie. 24 hours or 1 day)<br>
1374 <b>Considerations: </b>(1) The OpenPegasus internal SLP
1375 implementation does not support timeout registrations. This
1376 build option is useful, for example, if PEGASUS_USE_OPENSLP is
|
1377 kumpf 1.12 defined. (2) Some SLP implementations may impose a
|
1378 denise.eckstein 1.1 maximum value for the lifetime parameter. For example, OpenSLP
|
1379 kumpf 1.12 limits this value to SLP_LIFETIME_MAXIMUM (or 0xFFFF), and
|
1380 denise.eckstein 1.1 if this maximum value is passed to OpenSLP, then the timeout
1381 feature is disabled. Refer to the documentation of your SLP
1382 implementation for more information. (3) OpenPegasus will not
|
1383 kumpf 1.12 do any validity checking on the specified value, either
|
1384 denise.eckstein 1.1 to determine if it is a valid positive integer or if it
1385 exceeds some maximum value.<br>
1386 </ul>
1387
1388 <h5>PEGASUS_SNIA_EXTENSIONS</h5>
1389 <ul>
1390 <b>Description: </b> This variable is used to enable a
1391 set of workarounds that support the use of OpenPegasus
1392 in the SNIA Test Environment.<br>
1393 <b>Default Value: </b>Not Set<br>
1394 <b>Recommended Value (Development Build): </b>Not Set<br>
1395 <b>Recommended Value (Release Build): </b>Not Set<br>
1396 <b>Required: </b>No<br>
1397 <b>Considerations: </b>The functionality enabled with this
1398 variable is experimental and subject to change.
1399 </ul>
1400
1401 <h5>PEGASUS_SKIP_MOST_TEST_DIRS</h5>
1402 <ul>
1403 <b>Description: </b>If set to true, this variable can be used
1404 to reduce the time required to build OpenPegasus by significantly
1405 denise.eckstein 1.1 reducing the number of tests that are built.<br>
1406 <b>Default Value: </b>Not Set<br>
1407 <b>Recommended Value (Development Build): </b>Not Set<br>
1408 <b>Recommended Value (Release Build): </b>Not Set<br>
1409 <b>Required: </b>No<br>
1410 <b>Considerations: </b>Setting this variable to true
1411 affects the behavior of all recursive make targets (e.g.,
1412 clean, depend, all, unittests, alltests, and slptests).
1413 Use of this variable with test-related targets (e.g., unittests,
|
1414 kumpf 1.12 alltests and slptests) can produce unexpected results.
|
1415 denise.eckstein 1.1 To avoid creating an inconsistent PEGASUS_HOME directory,
1416 the PEGASUS_HOME directory (i.e., the OpenPegasus build
1417 directory) should be removed prior to enabling or disabling
1418 this variable. This variable should not be used to characterize
|
1419 kumpf 1.12 the set of files to be packaged in a release build. Please
|
1420 denise.eckstein 1.1 refer to the Runtime Packaging Definition PEP for the release
|
1421 kumpf 1.12 for a recommended list of files to be included in a release.
|
1422 denise.eckstein 1.1 </ul>
1423
1424 <h5>PEGASUS_TEST_ENABLE_DEBUG_TRACE</h5>
1425 <ul>
1426 <b>Description: </b>
1427 This variable is only used for testing. If set to true,
|
1428 kumpf 1.12 Discarded data trace will be enabled by the install_run
1429 target of the src/Server/Makefile before running the
|
1430 denise.eckstein 1.1 OpenPegasus TestMakefile test suite. <br>
1431 <b>Default Value: </b>Not Set<br>
1432 <b>Recommended Value (Development Build): </b>Set<br>
1433 <b>Recommended Value (Release Build): </b>Not Set<br>
1434 <b>Required: </b>No<br>
1435 <b>Considerations: </b>
|
1436 kumpf 1.12 This variable is useful in certain test environments to
1437 explicitly enable tracing to aid in better troubleshooting and
|
1438 denise.eckstein 1.1 detection of test failures (E.g. Test systems are experiencing
|
1439 kumpf 1.12 test failures due to connection timeouts, lost indications
|
1440 denise.eckstein 1.1 etc).<br>
1441 </ul>
1442
1443 <h5>PEGASUS_TEST_ISGROUP_GROUP/PEGASUS_TEST_ISGROUP_USER_SUCCESS/PEGASUS_TEST_ISGROUP_USER_FAILURE</h5>
1444 <ul>
|
1445 kumpf 1.12 <b>Description: </b>These variables are only used for testing.
|
1446 denise.eckstein 1.1 These variables allow the developer to define a valid group name,
1447 PEGASUS_TEST_ISGROUP_GROUP, a valid user name that is in the
1448 group, PEGASUS_TEST_ISGROUP_USER_SUCCESS, and an a valid user
1449 name that is not in the group, PEGASUS_TEST_ISGROUP_USER_FAILURE.
|
1450 kumpf 1.12 These variables are only used for testing and NOT part of the
|
1451 denise.eckstein 1.1 release.<br>
|
1452 kumpf 1.12 <b>Default Value(Windows):</b>
|
1453 denise.eckstein 1.1 Administrator/Administrators/Guest<br>
1454 <b>Default Value(Non-Windows): </b>root/root/guest<br>
1455 <b>Recommended Value (Development Build): </b>
1456 No Recommendation<br>
1457 <b>Recommended Value (Release Build): </b>Not Used<br>
1458 <b>Required: </b>No
1459 </ul>
1460
1461 <h5>PEGASUS_TEST_IPV6</h5>
1462 <ul>
1463 <b>Description: </b>This variable is only used for
1464 testing. If set to true, the IPv6-specific tests will
|
1465 kumpf 1.12 be run as part of the "alltests" OpenPegasus
|
1466 denise.eckstein 1.1 TestMakefile test suite. If this variable is not set or set to
1467 false, the IPv6-specific tests will not be run. All
1468 other values are invalid.<br>
|
1469 kumpf 1.12 <b>Default Value: </b>If PEGASUS_TEST_IPV6 is not defined,
|
1470 denise.eckstein 1.1 PEGASUS_TEST_IPV6 is set to the value of PEGASUS_ENABLE_IPV6.<br>
1471 <b>Recommended Value (Development Build): </b>Set to the value
1472 of PEGASUS_ENABLE_IPV6<br>
1473 <b>Recommended Value (Release Build): </b>Not Used<br>
1474 <b>Required: </b>No<br>
|
1475 kumpf 1.12 <b>Considerations: </b>This variable is useful in certain
|
1476 denise.eckstein 1.1 test environments to explicitly disable running the IPv6
|
1477 kumpf 1.12 tests (e.g., when running an IPv6-enabled version of
|
1478 denise.eckstein 1.1 OpenPegasus on an an IPv4 system).<br>
1479 </ul>
1480
1481 <h5>PEGASUS_TEST_SDK</h5>
1482 <ul>
|
1483 kumpf 1.12 <b>Description: </b>This variable is only used for
|
1484 denise.eckstein 1.1 testing. It is used to control testing of the SDK
1485 sample providers and clients. If set, the setup, building and
|
1486 kumpf 1.12 testing of the SDK samples is enabled as part of the
|
1487 denise.eckstein 1.1 OpenPegasus automated build and test.<br>
1488 <b>Default Value: </b>Not Set<br>
1489 <b>Recommended Value (Development Build): </b>Set<br>
1490 <b>Recommended Value (Release Build): </b>Not Used<br>
1491 <b>Required: </b>No
1492 </ul>
1493
1494 <h5>PEGASUS_TEST_USER_DEFINED</h5>
1495 <ul>
1496 <b>Description: </b>This variable is only used for testing.
1497 If this variable is set, the tests will assume that the
1498 PEGASUS_TEST_USER_ID and PEGASUS_TEST_USER_PASS variables
|
1499 kumpf 1.12 defines a valid user/password pair and can be used for
|
1500 denise.eckstein 1.1 certificate-based authentication testing. These tests
|
1501 kumpf 1.12 also assumes that "invalidUser" is not a valid
|
1502 denise.eckstein 1.1 user.<br>
1503 <b>Default Value: </b>Not Set<br>
1504 <b>Recommended Value (Development Build): </b>Set<br>
1505 <b>Recommended Value (Release Build): </b>Not Used<br>
1506 <b>Required: </b>No
1507 </ul>
1508
1509 <h5>PEGASUS_TEST_USER_ID/PEGASUS_TEST_USER_PASS</h5>
1510 <ul>
1511 <b>Description: </b>These variables are only used for
1512 testing. These variables allow the developer to define a
1513 valid, non-privileged user name and password
1514 on the test system that can be used as part of the OpenPegasus
1515 automated test scripts to perform authentication and
1516 authorization testing. These variables are only used for
1517 testing and NOT part of the release.<br>
1518 <b>Default Value: </b>guest/guest<br>
1519 <b>Recommended Value (Development Build): </b>
1520 No Recommendation<br>
1521 <b>Recommended Value (Release Build): </b>Not Used<br>
1522 <b>Required: </b>No<br>
1523 denise.eckstein 1.1 </ul>
1524
1525 <h5>PEGASUS_TEST_VALGRIND_LOG_DIR</h5>
1526 <ul>
1527 <b>Description: </b>
1528 This variable is currently only supported on Linux. It may be
|
1529 kumpf 1.12 set to run regression tests under the
|
1530 denise.eckstein 1.1 <a href="http://www.valgrind.org/">Valgrind</a> memory
1531 checking tool. It must specify a directory for writing
1532 Valgrind log files. The file name format for a particular
1533 log is PEGASUS_TEST_VALGRIND_LOG_DIR/PROGRAM_NAME.pid.<br>
1534 <b>Default Value: </b>Not Set<br>
1535 <b>Recommended Value (Development Build): </b>Not Set<br>
1536 <b>Recommended Value (Release Build): </b>Not Set<br>
1537 <b>Required: </b>No<br>
1538 <b>Considerations: </b>This flag is only supported on Linux to
1539 enable running tests under Valgrind.<br>
1540 </ul>
1541
1542 <h5>PEGASUS_TMP</h5>
1543 <ul>
1544 <b>Description: </b>This variable is only used in a test
1545 environment. It can be used to define the directory that
1546 OpenPegasus test programs should use to store temporary files.<br>
1547 <b>Default Value: </b>"."<br>
1548 <b>Recommended Value (Development Build): </b>
1549 No Specific Recommendation<br>
1550 <b>Recommended Value (Release Build): </b>Not Used<br>
1551 denise.eckstein 1.1 <b>Required: </b>No<br>
1552 </ul>
1553
1554 <h5>PEGASUS_USE_DEBUG_BUILD_OPTIONS</h5>
1555 <ul>
1556 <b>Description: </b>The PEGASUS_DEBUG flag is used to control
1557 a variety of settings, including compile options, assertion
|
1558 kumpf 1.12 enablement, method definitions for testing, and diagnostic
|
1559 denise.eckstein 1.1 output. The PEGASUS_USE_DEBUG_BUILD_OPTIONS variable
|
1560 kumpf 1.12 can be used to enable just the compiler specific debug options
|
1561 denise.eckstein 1.1 (e.g., -g in g++) .<br>
1562 <b>Default Value: </b>Not Set<br>
1563 <b>Recommended Value (Development Build): </b>Set<br>
1564 <b>Recommended Value (Release Build): </b>Not Set<br>
1565 <b>Required: </b>No<br>
1566 <b>Considerations: </b>This variable is automatically set
1567 if PEGASUS_DEBUG is set.<br>
1568 </ul>
1569
1570 <h5>PEGASUS_USE_EMANATE</h5>
1571 <ul>
1572 <b>Description: </b>EMANATE,
1573 <a href="http://www.snmp.com/products/emanate.html">
|
1574 kumpf 1.12 http://www.snmp.com/products/emanate.html</a>, is an SNMP Research
1575 International product that supports SNMPv1, SNMPv2c, and
|
1576 denise.eckstein 1.1 SNMPv3. If the PEGASUS_USE_EMANATE variable is defined,
1577 the OpenPegasus SNMP Handler will use the EMANATE libraries
|
1578 kumpf 1.12 to send traps to the SNMP Management application.
|
1579 denise.eckstein 1.1 The EMANATE libraries are NOT included as part of OpenPegasus.<br>
1580 <b>Default Value: </b>Not Set<br>
1581 <b>Recommended Value (Development Build): </b>Not Set<br>
1582 <b>Recommended Value (Release Build): </b>Not Set<br>
1583 <b>Required: </b>No<p>
1584 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
|
1585 kumpf 1.12 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1586 denise.eckstein 1.1 Handler to be supported.<br>
1587 </ul>
1588
1589
1590 <h5>PEGASUS_USE_NET_SNMP</h5>
1591 <ul>
|
1592 kumpf 1.12 <b>Description: </b>NET-SNMP,
|
1593 denise.eckstein 1.1 <a href="http://net-snmp.sourceforge.net">
1594 http://net-snmp.sourceforge.net</a>, is an OSS
1595 implementation of a suite of applications used to implement
1596 <a href="http://www.ietf.org/rfc/rfc1157.txt">SNMP v1</a>,
1597 <a href="http://www.ietf.org/rfc/rfc1901.txt">SNMP v2c</a> and
1598 <a href="http://www.ietf.org/rfc/rfc2571.txt">SNMP v3</a> using
|
1599 kumpf 1.12 both IPv4 and IPv6. If the PEGASUS_USE_NET_SNMP
|
1600 denise.eckstein 1.1 variable is defined, the OpenPegasus SNMP Handler will use
1601 the NET-SNMP libraries to send traps to the SNMP Management
1602 application. The NET-SNMP libraries are NOT included
1603 as part of OpenPegasus.<br>
1604 <b>Default Value: </b>Not Set<br>
1605 <b>Recommended Value (Development Build): </b>Not Set<br>
|
1606 kumpf 1.12 <b>Recommended Value (Release Build): </b>true for Linux,
|
1607 denise.eckstein 1.1 false for all other platforms<br>
1608 <b>Required: </b>No<p>
|
1609 kumpf 1.12 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1610 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1611 denise.eckstein 1.1 Handler to be supported.<br>
1612 </ul>
1613
|
1614 sahana.prabhakar 1.23 <h5>PEGASUS_ENABLE_NET_SNMPV3</h5>
1615 <ul>
1616 <b>Description: </b>If this variable is defined,
1617 then OpenPegasus SNMP Handler will build the SNMPV3
1618 features. This should be set to false if NET-SNMP 5.2 and lower
1619 libraries are used.<br>
1620 <b>Default Value: </b>true<br>
1621 <b>Recommended Value (Development Build): </b>true<br>
1622 <b>Recommended Value (Release Build): </b>true<br>
1623 <b>Required: </b>No<p>
1624 <b>Considerations: </b>PEGASUS_USE_NET_SNMP variable must
1625 be set.<br>
1626 </ul>
1627
1628
|
1629 denise.eckstein 1.1 <h5>PEGASUS_USE_OPENSLP</h5>
1630 <ul>
1631 <b>Description: </b>OpenSLP, <a href="http://www.openslp.org">
|
1632 kumpf 1.12 http://openslp.org</a>, is an open-source implementation of
|
1633 denise.eckstein 1.1 Service Location Protocol. If the PEGASUS_USE_OPENSLP variable
1634 is defined, OpenPegasus will be built to use the OpenSLP
1635 implementation of SLP instead of the internal OpenPegasus
1636 implementation of SLP. The OpenSLP libaries are NOT included
1637 as part of OpenPegasus.
1638 <b>Default Value: </b>Not Set<br>
1639 <b>Recommended Value (Development Build): </b>Not Set<br>
1640 <b>Recommended Value (Release Build): </b>Not Set<br>
1641 <b>Required: </b>No<br>
1642 <b>Considerations: </b>PEGASUS_ENABLE_SLP must be defined
1643 if this variable is set.
1644 </ul>
1645
1646 <h5>PEGASUS_USE_PAM_STANDALONE_PROC</h5>
1647 <ul>
1648 <b>Description: </b>Moves the processing of PAM requests from
1649 the CIM Server process to a separate process managed by the
1650 CIM Server.<br>
1651 <b>Default Value: </b>Not Set<br>
1652 <b>Recommended Value (Development Build): </b>Set<br>
1653 <b>Recommended Value (Release Build): </b>Set<br>
1654 denise.eckstein 1.1 <b>Required: </b>No<br>
1655 <b>Considerations: </b>If PAM Authentication is enabled,
1656 the PAM API is used, during the processing of each request, to
1657 authenticate the client. This level of use makes the CIM Server
1658 extremely sensitive to memory leaks in the PAM library. In
1659 addition, certain PAM modules are not thread-safe. If your
|
1660 kumpf 1.12 platform is experiencing problems with PAM Authentication,
|
1661 denise.eckstein 1.1 use of option may provide a work-around.
1662 PEGASUS_USE_PAM_STANDALONE_PROC requires
1663 PEGASUS_PAM_AUTHENTICATION to be set.<br>
1664 </ul>
1665
1666 <h5>PEGASUS_USE_RELEASE_CONFIG_OPTIONS</h5>
1667 <ul>
1668 <b>Description: </b>If set, OpenPegasus is built using
1669 the "Release Build" configuration options. By default,
|
1670 kumpf 1.12 OpenPegasus is built using the "Development Build"
|
1671 denise.eckstein 1.1 configuration options.<br>
|
1672 s.kodali 1.19 <b>Default Value: </b>false<br>
1673 <b>Recommended Value (Development Build): </b>false<br>
1674 <b>Recommended Value (Release Build): </b>true<br>
|
1675 denise.eckstein 1.1 <b>Required: </b>No<br>
|
1676 kumpf 1.12 <b>Considerations: </b>(1)The
1677 PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a platform
|
1678 denise.eckstein 1.1 vendor to easily toggle between two sets of configurations
1679 options, a set of options tuned for the development/debug
1680 ("Development Build") environment and a set of options
1681 tuned for the production environment ("Release Build").
|
1682 kumpf 1.12 Refer the section titled "Configuration Properties" for
1683 additional detail. (2) For each configuration
|
1684 denise.eckstein 1.1 variable, the "Recommended Value (Release Build)"
|
1685 kumpf 1.12 value defines the recommended settings to use for a
1686 "Release Build". Please refer to the
|
1687 denise.eckstein 1.1 description of each variable for additional information.
1688 </ul>
1689
1690 <h5>PEGASUS_USE_RELEASE_DIRS</h5>
1691 <ul>
|
1692 kumpf 1.12 <b>Description: </b>If set, OpenPegasus is built using
1693 the "Release Build" directory definitions. By default,
1694 OpenPegasus is built using the "Development Build"
|
1695 denise.eckstein 1.1 directory definitions.<br>
1696 <b>Default Value: </b>Not Set<br>
1697 <b>Recommended Value (Development Build): </b>Not Set<br>
1698 <b>Recommended Value (Release Build): </b>Set<br>
1699 <b>Required: </b>No<br>
|
1700 kumpf 1.12 <b>Considerations: </b>
|
1701 denise.eckstein 1.1 The PEGASUS_USE_RELEASE_DIRS variable allows a platform
|
1702 kumpf 1.12 vendor to easily toggle between two sets of directory
1703 definitions, a set tuned for the development/debug
1704 ("Development Build") environment and a set tuned for the
1705 production environment ("Release Build"). Refer the section
|
1706 denise.eckstein 1.1 titled "Configuration Properties" for additional detail.<br>
1707 </ul>
1708
|
1709 s.kodali 1.18 <h5>PEGASUS_FLAVOR</h5>
1710 <ul>
1711 <b>Description: </b> This variable is used for configuring Multi CIMOM
1712 on same OS by eliminating single point for storage of PID's and configuration
1713 files. Flavor is used in structuring the release dirs,configuration file names,
1714 log identity and PAM config file.
1715 If set, OpenPegasus is built using the flavor value. By default OpenPegasus is
1716 built using "tog" as the flavor. RPMs are named using the flavor value.
1717 <br>
1718 <b>Default Value: </b>tog<br>
1719 <b>Recommended Value (Development Build): </b>tog<br>
1720 <b>Recommended Value (Release Build): </b>tog<br>
1721 <b>Required: </b>No<br>
1722 <b>Considerations: </b>
1723 To build RPM using flavor, RPM spec file needs to be regenerated after setting the flavor value.
1724 This can be done using the create_OpenPegasusRPMSpecFile target in the Makefile.Release.
1725 Platforms have to define their own release dir structure using the flavor for release builds.
1726 An error will be reported if both PEGASUS_FLAVOR and PEGASUS_USE_RELEASE_DIRS are set and
1727 PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS is not set.
1728 RPM build on linux defines PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS by default.
1729 <br>
1730 s.kodali 1.18 </ul>
1731
|
1732 s.kodali 1.22 <h5>PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT</h5>
1733 <ul>
1734 <b>Description: </b> Builds the Pegasus with 32-bit provider support for the specified platform.
1735 If this option is set, the value MUST be one of the 32-bit supported platforms by Pegasus.
1736 <br>
1737 <b>Default Value: </b>Not set<br>
1738 <b>Recommended Value (Development Build): </b>Not set<br>
1739 <b>Recommended Value (Release Build): </b>Not set<br>
1740 <b>Required: </b>No<br>
1741 <b>Considerations: </b>
1742 This option is used to run the 32-bit providers under 64-bit CIMserver.
1743 To register the 32-bit providers, register the provider module by setting the
1744 Bitness property value to "2". 32-bit Providers are always loaded out of process
1745 irrespective of forceProviderProcesses config option.
1746 <br>
1747 </ul>
1748
|
1749 kumpf 1.6 <h5>PEGASUS_USE_SQLITE_REPOSITORY</h5>
1750 <ul>
1751 <b>Description: </b>If true, new repository stores are created
1752 using a SQLite database. Existing file-based stores will continue
1753 to be recognized and operate seamlessly.<br>
1754 <b>Default Value: </b>false<br>
1755 <b>Recommended Value (Development Build): </b>true<br>
1756 <b>Recommended Value (Release Build): </b>true<br>
1757 <b>Required: </b>No<br>
1758 <b>Considerations: </b>If PEGASUS_USE_SQLITE_REPOSITORY is set to true
1759 and SQLite files are not installed in default search locations,
1760 SQLITE_HOME must also be configured.
1761 PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES may not be set to true when
1762 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1763 </ul>
1764
|
1765 denise.eckstein 1.1 <h5>PEGASUS_USE_SYSLOGS</h5>
1766 <ul>
1767 <b>Description: </b>If set, OpenPegasus will be built
1768 to send log messages to the system logger (syslog).
1769 Otherwise, log messages will be sent to OpenPegasus
1770 specific log files.<br>
1771 <b>Recommended Value (Development Build): </b>Set<br>
1772 <b>Recommended Value (Release Build): </b>Set<br>
1773 <b>Required: </b>No<br>
1774 <b>Considerations: </b>This variable is currently
1775 not implemented as an environment variable. To use
1776 the option -DPEGASUS_USE_SYSLOGS must
1777 be explicitly included in the appropriate platform
1778 makefile (pegasus/mak/platform_*.mak).</ul>
1779
1780 <h5>PEGASUS_WINDOWS_SDK_HOME</h5>
1781 <ul>
|
1782 kumpf 1.12 <b>Description: </b>This variable should be set to point
1783 to the Microsoft Platform SDK on Windows if using a compiler
|
1784 denise.eckstein 1.1 version < 1300 (i.e. VC6). If using VC7 or VC8, this flag
1785 does not need to be set, as the necessary libraries are already
1786 included.<br>
1787 <b>Recommended Value (Development Build): </b>
1788 No Specific Recommendation<br>
1789 <b>Recommended Value (Release Build): </b>
1790 No Specific Recommendation<br>
1791 <b>Required: </b>Yes, if building on Windows with a
1792 compiler version < 1300.<br>
1793 </ul>
1794
|
1795 kumpf 1.6 <h5>SQLITE_HOME</h5>
1796 <ul>
1797 <b>Description: </b>Specifies the location of the SQLite SDK directory.
1798 This directory must contain sqlite3.h in the $(SQLITE_HOME)/include
1799 directory, and libsqlite3 in the $(SQLITE_HOME)/lib directory.<br>
1800 <b>Default Value: </b>Not Set<br>
1801 <b>Recommended Value (Development Build): </b>
1802 No Specific Recommendation<br>
1803 <b>Recommended Value (Release Build): </b>
1804 No Specific Recommendation<br>
1805 <b>Required: </b>Yes, if PEGASUS_USE_SQLITE_REPOSITORY is set to true
1806 and the SQLite files are not installed in locations that are searched by
1807 default.<br>
1808 <b>Considerations: </b>This environment variable is only used if
1809 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1810 </ul>
1811
|
1812 marek 1.24 <h5>PEGASUS_INITIAL_THREADSTACK_SIZE</h5>
1813 <ul>
1814 <b>Description: </b>This environment variable sets the initial size
1815 of the stack on new threads. Value is specified in number of bytes.<br>
1816 <b>Default Value: </b>262144<br>
1817 <b>Recommended Value (Development Build): </b>262144<br>
1818 <b>Recommended Value (Release Build): </b>262144<br>
1819 <b>Required: </b>No </p>
1820 </ul>
1821
|
1822 denise.eckstein 1.1 <h4>Examples Building a Linux IA32 (#IA64) Development/Debug Version</h4>
1823 <ul>
1824 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
|
1825 kumpf 1.12 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
|
1826 denise.eckstein 1.1 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
|
1827 kumpf 1.12 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1828 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1829 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
|
1830 kumpf 1.12 export PEGASUS_HAS_SSL=yes<br>
|
1831 denise.eckstein 1.1 export PEGASUS_DEBUG=TRUE<br>
1832 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
|
1833 kumpf 1.12 export PEGASUS_USE_SYSLOGS=true<br>
|
1834 denise.eckstein 1.1 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1835 </ul>
1836
1837 <h4>Building a Linux IA32 (#IA64) Production Release Version</h4>
1838 <ul>
1839 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1840 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1841 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1842 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
|
1843 kumpf 1.16 export PEGASUS_ENABLE_CQL=false<br>
1844 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1845 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1846 export PEGASUS_HAS_SSL=yes<br>
1847 export PEGASUS_USE_RELEASE_CONFIG_OPTIONS=true<br>
|
1848 kumpf 1.12 export PEGASUS_USE_RELEASE_DIRS=true<br>
|
1849 denise.eckstein 1.1 export PEGASUS_NOASSERTS=true<br>
1850 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1851 export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true<br>
1852 export PEGASUS_USE_SYSLOGS=true<br>
1853 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1854 </ul>
1855
1856 <h3>Environment Variable Settings for <u>Running</u> OpenPegasus</h3>
1857
1858 <h4>Definitions</h4>
1859
1860 <h5>PEGASUS_HOME</h5>
1861 <ul>
|
1862 kumpf 1.12 <b>Description: </b>There are multiple options for
|
1863 denise.eckstein 1.1 configuring the location of OpenPegasus runtime
|
1864 kumpf 1.12 files (e.g., configuration files, libraries,
|
1865 denise.eckstein 1.1 repository, executables). If no other option is
1866 specified, OpenPegasus will attempt to use the value
1867 PEGASUS_HOME.<br>
1868 <b>Default Value: </b>"."<br>
1869 <b>Recommended Value (Development Build): </b>
1870 The same value defined at build time.<br>
1871 <b>Recommended Value (Release Build): </b>Not Set<br>
1872 <b>Required: </b>No<br>
1873 <b>Considerations: </b>Although this variable can be
1874 useful in a development environment use of this environment
1875 variable is not recommended in a production environment.
1876 Instead, the use of configuration properties to explicitly
1877 set the location of runtime files and directories is recommended.
1878 </ul>
1879
1880 <h5>PEGASUS_MSG_HOME</h5>
1881 <ul>
1882 <b>Description: </b>This value is not used by the CIM
1883 Server. The CIM Server uses the messageDir configuration
1884 parameter to locate the directory where the ICU resource bundles.
1885 However, CIM Client applications must rely on an alternative
1886 denise.eckstein 1.1 mechanism to locate this directory.<br>
|
1887 kumpf 1.12 <b>Default Value: </b>if $PEGASUS_HOME is set then
|
1888 denise.eckstein 1.1 "$PEGASUS_HOME/msg" else "."<br>
1889 <b>Recommended Value (Development Build): </b>$PEGASUS_HOME/msg<br>
1890 <b>Recommended Value (Release Build): </b>Not Set <br>
1891 <b>Required: </b>No<br>
1892 </ul>
1893
1894 <h3>Configuration Properties</h3>
1895
1896 <h4>Notation</h4>
1897
|
1898 kumpf 1.12 <p>This section describes the notation used to define the
|
1899 denise.eckstein 1.1 configuration properties.</p>
1900
1901 <ul>
1902
1903 <h5>Default Value</h5>
1904 The value of <i>Default Value</i> is the OpenPegasus
1905 default setting for this configuration option. This
1906 value is used if a platform-specific setting is not
|
1907 kumpf 1.12 defined.
|
1908 denise.eckstein 1.1
1909 <h5>Recommended Default Value</h5>
|
1910 kumpf 1.12 The PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a
1911 platform vendor to easily toggle between two sets of
|
1912 denise.eckstein 1.1 configurations options, a set of options tuned for the
|
1913 kumpf 1.12 development/debug ("Development Build") environment
|
1914 denise.eckstein 1.1 and a set of options tuned for the production environment
|
1915 kumpf 1.12 ("Release Build"). The value of
1916 <i>Recommended Value (Development Build)</i>
|
1917 denise.eckstein 1.1 is the recommended default value for use in a development/
|
1918 kumpf 1.12 debug environment. The value of
|
1919 denise.eckstein 1.1 <i>Recommended Value (Release Build)</i> is the recommended
|
1920 kumpf 1.12 default value for use in a production environment.
1921
|
1922 denise.eckstein 1.1 <h5>Recommend To Be Fixed/Hidden</h5>
1923 Configuration options can be defined as fixed or hidden.
1924 A "fix" configuration option is set at build time
|
1925 kumpf 1.12 and cannot be changed without rebuilding. "Fixed"
|
1926 denise.eckstein 1.1 configuration options are not displayed using the cimconfig
|
1927 kumpf 1.12 command. This feature can be used by vendors to limit
|
1928 denise.eckstein 1.1 OpenPegasus functionality and configurability.
|
1929 kumpf 1.12
1930 A "hidden" configuration option is an option that is
|
1931 denise.eckstein 1.1 configurable (i.e., "not fixed"), but not externally
1932 advertised using the cimconfig command. The "hidden"
1933 feature can be used to define "internal use only"
1934 configuration options.
|
1935 kumpf 1.12
|
1936 denise.eckstein 1.1 <h5>Dynamic?</h5>
1937 If yes, the value of the configuration option can be
1938 changed without stopping and restarting the CIM Server.
1939
1940 <h5>Directory Specifications</h5>
1941 <p>Note that the variables included in the following table
|
1942 kumpf 1.12 (e.g., $LOGDIR) are for documentation purposes only and
1943 have been defined to simplify the description of the
1944 configuration options. In particular,
|
1945 denise.eckstein 1.1 these variables DO NOT correspond to environment variables
|
1946 kumpf 1.12 implemented in the OpenPegasus code. Default values
1947 for the following variables are platform
|
1948 denise.eckstein 1.1 and vendor dependent and not documented in this document.</p>
1949
1950 <table border="1" cellspacing="1" bordercolordark="#666666"
1951 bordercolorlight="#CCCCCC" width=148
1952 style='font-size=10.0pt;font-family:Arial' height="228">
1953 <tr>
1954 <th bgcolor="#CAE6CA" width=1 height="16"> </th>
1955 </tr>
1956 <tr align="center">
1957 <td align="left" width="1" height="12">$LOGDIR</td>
1958 </tr>
1959 <tr align="center">
1960 <td align="left" width="1" height="14">$PROVIDERDIRS</td>
1961 </tr>
1962 <tr align="center">
1963 <td align="left" width="1" height="14">
1964 $PROVIDERMANAGERDIRS</td>
1965 </tr>
1966 <tr align="center">
1967 <td align="left" width="1" height="14">$REPOSITORYDIR </td>
1968 </tr>
1969 denise.eckstein 1.1 <tr align="center">
1970 <td align="left" width="1" height="14">$CERTIFICATEDIR
1971 </td>
1972 </tr>
1973 <tr align="center">
1974 <td align="left" width="1" height="14">$LOCALAUTHDIR</td>
1975 </tr>
1976 <tr align="center">
1977 <td align="left" width="1" height="14">$TRACEDIR</td>
1978 </tr>
1979 <tr align="center">
1980 <td align="left" width="1" height="14">$CONFIGDIR</td>
1981 </tr>
1982 <tr align="center">
1983 <td align="left" width="1" height="14">$PIDFILE</td>
1984 </tr>
1985 <tr align="center">
1986 <td align="left" width="1" height="14">$RANDOMDIR</td>
1987 </tr>
1988 <tr align="center">
1989 <td align="left" width="1" height="14">$SOCKETDIR</td>
1990 denise.eckstein 1.1 </tr>
1991 <tr align="center">
1992 <td align="left" width="1" height="14">$MESSAGEDIR</td>
1993 </tr>
1994 </table>
|
1995 kumpf 1.12 </ul>
|
1996 denise.eckstein 1.1
1997 <h4>Definitions</h4>
1998
1999 <h5>authorizedUserGroups</h5>
2000 <ul>
|
2001 kumpf 1.12 <b>Description:</b> If the <b>authorizedUserGroups</b>
|
2002 denise.eckstein 1.1 property is set, the value is interpreted as a list of
2003 comma-separated user groups whose members may issue CIM
2004 requests. A user who is not a member of any of these groups is
2005 restricted from issuing CIM requests, with the exception of
2006 privileged users (root user). If the <b>authorizedUserGroups</b>
2007 property is not set, any user may issue CIM requests.<br>
2008 <b>Default Value: </b>blank<br>
2009 <b>Recommended Default Value (Development Build): </b>blank<br>
2010 <b>Recommended Default Value (Release Build): </b>blank<br>
2011 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2012 No/No<br>
2013 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2014 <b>Dynamic?: </b>No<br>
2015 <b>Example: </b>
2016 #cimconfig -s authorizedUserGroups=users,systemusers -p<br>
2017 <b>Considerations: </b>This feature is available only when
2018 the OpenPegasus source is compiled with the flag
2019 PEGASUS_ENABLE_USERGROUP_AUTHORIZATION set.
2020 </ul>
2021
2022 <h5>daemon</h5>
2023 denise.eckstein 1.1 <ul>
2024 <b>Description: </b>This option enables/disables forking of
2025 the code to create a background daemon process.<br>
2026 <b>Default Value: </b>true<br>
2027 <b>Recommended Default Value (Development Build): </b>true<br>
2028 <b>Recommended Default Value (Release Build): </b>true<br>
2029 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2030 No/No<br>
2031 <b>Recommend To Be Fixed/Hidden (Release Build): </b>
2032 No/Yes<br>
2033 <b>Dynamic?: </b>No<p> <br>
2034 <br>
2035 <table border="1" cellspacing="1" bordercolordark="#666666"
2036 bordercolorlight="#CCCCCC" width=531
2037 style='font-size=10.0pt;font-family:Arial'>
2038 <tr>
2039 <th bgcolor="#CAE6CA" width="168">Platform</th>
2040 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2041 </tr>
2042 <tr align="center">
2043 <td width="168">Linux</td>
2044 denise.eckstein 1.1 <td align="left" width="350">
2045 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2046 </tr>
2047 <tr align="center">
2048 <td width="168">HP-UX</td>
2049 <td align="left" width="350">
2050 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2051 </tr>
2052 <tr align="center">
2053 <td width="168">OpenVMS</td>
2054 <td align="left" width="350">
2055 Pegasus/Config/DefaultPropertyTableVms.h</td>
2056 </tr>
2057 </table>
2058 </ul>
2059
2060 <h5>enableAssociationTraversal</h5>
2061 <ul>
2062 <b>Description: </b>If true, the CIM Server will support
|
2063 kumpf 1.12 the four association traversal operators: Associators,
|
2064 denise.eckstein 1.1 AssociatorNames,References, and ReferenceNames.<br>
2065 <b>Default Value: </b>true<br>
2066 <b>Recommended Default Value (Development Build): </b>true<br>
2067 <b>Recommended Default Value (Release Build): </b>true<br>
2068 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2069 No/No<br>
2070 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2071 <b>Dynamic?: </b>No<br>
|
2072 kumpf 1.12 <b>Considerations: </b>There is still an outstanding
|
2073 denise.eckstein 1.1 Provider Registration issue that restricts the degree to
2074 which separate Providers can register for Associations.<br>
2075 <br>
2076 <table border="1" cellspacing="1" bordercolordark="#666666"
2077 bordercolorlight="#CCCCCC" width=531
2078 style='font-size=10.0pt;font-family:Arial'>
2079 <tr>
2080 <th bgcolor="#CAE6CA" width="168">Platform</th>
2081 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2082 </tr>
2083 <tr align="center">
2084 <td width="168">Linux</td>
2085 <td align="left" width="350">
2086 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2087 </tr>
2088 <tr align="center">
2089 <td width="168">HP-UX</td>
2090 <td align="left" width="350">
2091 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2092 </tr>
2093 <tr align="center">
2094 denise.eckstein 1.1 <td width="168">OpenVMS</td>
2095 <td align="left" width="350">
2096 Pegasus/Config/DefaultPropertyTableVms.h</td>
2097 </tr>
2098 </table>
2099 </ul>
2100
2101 <h5>enableAuditLog</h5>
2102 <ul>
|
2103 kumpf 1.12 <b>Description: </b>Used to enable or disable audit
|
2104 denise.eckstein 1.1 logging at run time. If true, audit logging will be enabled.<br>
2105 <b>Recommended Default Value (Development Build): </b>false<br>
2106 <b>Recommended Default Value (Release Build): </b>false<br>
2107 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2108 No/No<br>
2109 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2110 <b>Dynamic?: </b>Yes<br>
2111 <b>Source Configuration File: </b>
2112 Pegasus/Config/DefaultPropertyTable.h<br>
2113 </ul>
2114
2115 <h5>enableAuthentication</h5>
2116 <ul>
2117 <b>Description: </b>If true, a Client must be authenticated
2118 to access the CIM Server.<br>
2119 <b>Recommended Default Value (Development Build): </b>false<br>
2120 <b>Recommended Default Value (Release Build): </b>true<br>
2121 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2122 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2123 <b>Dynamic?: </b>No<br>
2124 <b>Source Configuration File: </b>
2125 denise.eckstein 1.1 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2126 </ul>
2127
2128 <h5>enableBinaryRepository</h5>
2129 <ul>
2130 <b>Description: </b>Setting this to true will activate the
2131 binary repository support on the next restart of cimserver.<br>
2132 <b>Recommended Default Value (Development Build): </b>false<br>
2133 <b>Recommended Default Value (Release Build): </b>false<br>
2134 <b>Recommend To Be Fixed/Hidden (Development Build): </b>Yes<br>
2135 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2136 <b>Dynamic?: </b>No<br>
2137 <b>Considerations: </b>Repositories containing a mixture
2138 of binary and XML objects are supported.<br>
2139 <b>Source Configuration File: </b>
2140 Pegasus/Config/RepositoryPropertyOwner.cpp</p>
2141 </ul>
2142
2143
2144 <h5>enableHttpConnection</h5>
2145 <ul>
2146 denise.eckstein 1.1 <b>Description: </b>If true, allows connections to
2147 the CIM Server using the HTTP protocol<br>
2148 <b>Default Value: </b>true<br>
2149 <b>Recommended Default Value (Development Build): </b>true<br>
2150 <b>Recommended Default Value (Release Build): </b>false<br>
2151 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2152 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2153 <b>Dynamic?: </b>No<br>
2154 <b>Considerations: </b>
|
2155 kumpf 1.12 Enabling HTTP will allow clients to connect with security
2156 properties different than those associated with encrypted SSL
|
2157 denise.eckstein 1.1 traffic, and its configured SSL authentication or other security
2158 behavior. This option should only be enabled in environments
2159 where sending the HTTP Request and HTTP Response as
2160 clear text messages does not introduce a security risk.
|
2161 kumpf 1.12 Note that if authentication is enabled (enableAuthentication),
2162 user names and passwords will be included in the text of the
|
2163 denise.eckstein 1.1 HTTP message.<br>
2164 <br>
2165 <table border="1" cellspacing="1" bordercolordark="#666666"
2166 bordercolorlight="#CCCCCC" width=531
2167 style='font-size=10.0pt;font-family:Arial'>
2168 <tr>
2169 <th bgcolor="#CAE6CA" width="168">Platform</th>
2170 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2171 </tr>
2172 <tr align="center">
2173 <td width="168">Linux</td>
2174 <td align="left" width="350">
2175 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2176 </tr>
2177 <tr align="center">
2178 <td width="168">HP-UX</td>
2179 <td align="left" width="350">
2180 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2181 </tr>
2182 <tr align="center">
2183 <td width="168">OpenVMS</td>
2184 denise.eckstein 1.1 <td align="left" width="350">
2185 Pegasus/Config/DefaultPropertyTableVms.h</td>
2186 </tr>
2187 </table>
2188 </ul>
2189
2190 <h5>enableHttpsConnection</h5>
2191 <ul>
|
2192 kumpf 1.12 <b>Description: </b>If true, allows connections to
2193 the CIM Server using the HTTPS protocol (HTTP using
|
2194 denise.eckstein 1.1 Secure Socket Layer encryption)<br>
2195 <b>Default Value: </b>false<br>
2196 <b>Recommended Default Value (Development Build): </b>true<br>
2197 <b>Recommended Default Value (Release Build): </b>true<br>
2198 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2199 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2200 <b>Dynamic?: </b>No<br>
2201 <b>Considerations: </b>For this option to work,
2202 the environment variable PEGASUS_HAS_SSL must have
2203 been set when CIM Server was built.<br>
2204 <br>
2205 <table border="1" cellspacing="1" bordercolordark="#666666"
2206 bordercolorlight="#CCCCCC" width=531
2207 style='font-size=10.0pt;font-family:Arial'>
2208 <tr>
2209 <th bgcolor="#CAE6CA" width="168">Platform</th>
2210 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2211 </tr>
2212 <tr align="center">
2213 <td width="168">Linux</td>
2214 <td align="left" width="350">
2215 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2216 </tr>
2217 <tr align="center">
2218 <td width="168">HP-UX</td>
2219 <td align="left" width="350">
2220 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2221 </tr>
2222 <tr align="center">
2223 <td width="168">OpenVMS</td>
2224 <td align="left" width="350">
2225 Pegasus/Config/DefaultPropertyTableVms.h</td>
2226 </tr>
2227 </table>
2228 </ul>
2229
2230 <h5>enableIndicationService</h5>
2231 <ul>
2232 <b>Description: </b>If true, the CIM Server will support
2233 CIM Indications.<br>
2234 <b>Default Value: </b>true<br>
2235 <b>Recommended Default Value (Development Build): </b>true<br>
2236 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>true<br>
2237 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2238 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2239 venkat.puvvada 1.15 <b>Dynamic?: </b>Yes/No<br>
2240 <b>Considerations: </b>When enableIndicationService is set to
2241 false dynamically, delete subscription requests are sent to all
2242 indication providers and indication related operations are
2243 not supported until indication service is re-enabled. Dynamic
2244 configuration facility is available only when Pegasus is compiled
2245 with PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT=true. Clients
2246 who wants to utilize the IndicationService services MUST check for
2247 CIM_IndicationService EnabledState and HealthState properties to know
2248 the current indication service state. For example, User can enumerate
2249 instances of CIM_IndicationService and there is exactly one instance
2250 of CIM_IndicationService returned. (Ex. using cimcli command
2251 'cimcli ei -n root/PG_InterOp CIM_IndicationService'). When requested state
2252 change(Enabled/Disabled) cannot be made because of timeout or some
2253 other exception IndicationService HealthState is set to "Degraded/Warning".
2254 For example, if user requested for indication service disable (by setting
2255 enableIndicationService=false), disable failed because of timeout or some
2256 other exception. Now service health state is set to "Degraded/Warning"
2257 and service EnabledState will remain enabled. User can now identify the
2258 faulty provider causing the timeout or any other problem and can take
2259 appropriate action. User can again request for service disable to recover
2260 venkat.puvvada 1.15 from degraded state. Similar sequence applies while enabling the indication
2261 service. Only difference is that service EnabledState is set to Enabled
2262 if exception or timeout happens. There is no automatic recovery from
2263 degraded state is available at present.<br>
|
2264 denise.eckstein 1.1 <br>
2265 <table border="1" cellspacing="1" bordercolordark="#666666"
2266 bordercolorlight="#CCCCCC" width=531
2267 style='font-size=10.0pt;font-family:Arial'>
2268 <tr>
2269 <th bgcolor="#CAE6CA" width="168">Platform</th>
2270 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2271 </tr>
2272 <tr align="center">
2273 <td width="168">Linux</td>
2274 <td align="left" width="350">
2275 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2276 </tr>
2277 <tr align="center">
2278 <td width="168">HP-UX</td>
2279 <td align="left" width="350">
2280 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2281 </tr>
2282 <tr align="center">
2283 <td width="168">OpenVMS</td>
2284 <td align="left" width="350">
2285 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableVms.h</td>
2286 </tr>
2287 </table>
2288 </ul>
2289
2290 <h5>enableNamespaceAuthorization</h5>
2291 <ul>
2292 <b>Description: </b>If true, the CIM Server restricts
|
2293 kumpf 1.12 access to namespaces based on configured user authorizations
2294 [user authorizations may be configured using the cimauth
|
2295 denise.eckstein 1.1 command]<br>
2296 <b>Default Value: </b>false<br>
2297 <b>Recommended Default Value (Development Build): </b>false<br>
2298 <b>Recommended Default Value (Release Build): </b>false<br>
2299 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2300 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2301 <b>Dynamic?: </b>No<br>
2302 <b>Considerations: </b>
2303 This option offers limited functionality and, in most
2304 environments, expensive to administer. It's use is not
2305 recommended.<br>
2306 <b>Source Configuration File: </b>
2307 Pegasus/Config/SecurityPropertyOwner.cpp</ul>
2308
2309 <h5>enableNormalization</h5>
2310 <ul>
|
2311 kumpf 1.12 <b>Description: </b>If true, objects returned from instance
|
2312 denise.eckstein 1.1 providers are validated and normalized. <br>
2313 <b>Default Value: </b>true<br>
2314 <b>Recommended Default Value (Development Build): </b>true<br>
2315 <b>Recommended Default Value (Release Build): </b>false<br>
2316 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2317 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2318 kavita.gupta 1.7 <b>Dynamic?: </b>Yes<br>
|
2319 denise.eckstein 1.1 <b>Considerations: </b>
2320 <ul>
2321 <li>Any errors encountered during normalization result in a
|
2322 kumpf 1.12 CIMException with the status code set to CIM_ERR_FAILED
2323 and a meaningful, context specific error description
|
2324 denise.eckstein 1.1 (messages will be localized). Providers that catch the
|
2325 kumpf 1.12 exception have an opportunity to handle the error.
|
2326 denise.eckstein 1.1 Otherwise, the exception is passed to the Provider Manager
|
2327 kumpf 1.12 and becomes the response for that Provider.
|
2328 denise.eckstein 1.1 <li>Provider Modules that are listed on the
|
2329 kumpf 1.12 excludeModulesFromNormalization
2330 configuration option are excluded from normalization.
|
2331 denise.eckstein 1.1 <li>Since the concept of normalization is relatively new to
2332 OpenPegasus and it establishes and enforces rules for
|
2333 kumpf 1.12 objects returned by providers, it should only
2334 apply to providers written against the SDK in which it was
|
2335 denise.eckstein 1.1 introduced (or later). Therefore only Provider Modules that
|
2336 kumpf 1.12 have the following InterfaceType and InterfaceVersion
2337 combination will be subject to normalization:
|
2338 denise.eckstein 1.1 <ul>
|
2339 kumpf 1.12 <li>'C++Default' / 2.5.0 or greater
2340 <li>'CMPI' / 2.0.0 or greater
|
2341 denise.eckstein 1.1 <li>'JMPI' / 1.0.0 or greater
2342 </ul>
2343 </ul>
2344 <b>Source Configuration File: </b>
2345 Pegasus/Config/NormalizationPropertyOwner.cpp<br>
2346 </ul>
2347
2348
2349 <h5>enableRemotePrivilegedUserAccess</h5>
2350 <ul>
|
2351 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows
|
2352 denise.eckstein 1.1 access by a privileged user from a remote system<br>
2353 <b>Default Value: </b>true<br>
2354 <b>Recommended Default Value (Development Build): </b>true<br>
2355 <b>Recommended Default Value (Release Build): </b>true<br>
2356 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2357 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2358 <b>Dynamic?: </b>No<br>
2359 <b>Considerations: </b>Many management operations require
2360 privileged user access. Disabling remote access by
|
2361 kumpf 1.12 privileged user could significantly affect
|
2362 denise.eckstein 1.1 functionality.<br>
2363 <b>Source Configuration File: </b>
2364 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2365 </ul>
2366
2367 <h5>enableSubscriptionsForNonprivilegedUsers</h5>
2368 <ul>
2369 <b>Description: </b>If true, operations (create instance,
|
2370 kumpf 1.12 modify instance, delete instance, get instance, enumerate
2371 instances, enumerate instance names) on indication
2372 filter, listener destination, and subscription instances
|
2373 denise.eckstein 1.1 may be performed by non-privileged users. Otherwise, these
2374 operations may only be performed on these instances by
2375 privileged users.<br>
2376 <b>Default Value: </b>true<br>
2377 <b>Recommended Default Value (Development Build): </b>true<br>
2378 <b>Recommended Default Value (Release Build): </b>false<br>
2379 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2380 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2381 <b>Dynamic?: </b>No<br>
|
2382 kumpf 1.12 <b>Considerations: </b>This option has meaning only if
|
2383 denise.eckstein 1.1 enableIndicationService=true.<br>
2384 <b>Source Configuration File: </b>
2385 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2386 </ul>
2387
2388 <h5>excludeModulesFromNormalization</h5>
2389 <ul>
|
2390 kumpf 1.12 <b>Description: </b>If the excludeModulesfromNormalization
2391 property is set, the value is interpreted as a list of
2392 comma-separated Provider Module names (as specified in
2393 PG_ProviderModule.Name) to exclude from validation and
|
2394 denise.eckstein 1.1 normalization.<br>
2395 <b>Default Value: </b>""<br>
2396 <b>Recommended Default Value (Development Build):</b>
2397 ""<br>
2398 <b>Recommended Default Value (Release Build): </b>
2399 ""<br>
2400 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2401 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2402 <b>Dynamic?: </b>No<br>
2403 <b>Considerations: </b>All objects managed by all
2404 providers will be excluded from validation and normalization
2405 if its module name appears in this list.<br>
2406 <b>Source Configuration File: </b>
2407 Pegasus/Config/NormalizationPropertyOwner.cpp
2408 </ul>
2409
2410 <h5>forceProviderProcesses</h5>
2411 <ul>
2412 <b>Description: </b>If true, the CIM Server runs Providers
2413 in separate processes rather than loading and calling Provider
2414 libraries directly within the CIM Server process.<br>
|
2415 kumpf 1.12 <b>Default Value: </b>Dependent on the value of
|
2416 denise.eckstein 1.1 PEGASUS_DEFAULT_ENABLE_OOP<br>
2417 <b>Recommended Default Value (Development Build):</b>true (HP-UX,
2418 Linux)<br>
2419 <b>Recommended Default Value (Release Build): </b>true (HP-UX,
2420 Linux)<br>
2421 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2422 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2423 <b>Dynamic?: </b>No<br>
2424 <b>Considerations: </b>In a dynamic, potentially multi-vendor,
|
2425 kumpf 1.12 environment, the ability to run Providers in separate processes
2426 can significantly increase the stability, maintainability and
|
2427 denise.eckstein 1.1 supportability of the overall solution. Running Providers
2428 in separate process spaces: (1) helps isolate components (i.e.,
|
2429 kumpf 1.12 cimserver and Providers) from a catastrophic failure
|
2430 denise.eckstein 1.1 (segmentation faults, memory leaks) of a single Provider and (2)
2431 reduces the risk of accidental or malicious sharing of sensitive
|
2432 kumpf 1.12 data among Providers. This benefit comes at a cost.
2433 Moving Providers out of the cimserver process increases
|
2434 denise.eckstein 1.1 communication costs and can significantly increase response
2435 time. Actual results will vary, but it is common for
2436 response times to increase by a factor of 2.<br>
|
2437 kumpf 1.12 <b>Note 1: </b>When forceProviderProcesses is true, the CIM
|
2438 denise.eckstein 1.1 Server will load each Provider Module (i.e., library) into a
2439 separate process. Providers in different Provider Modules
2440 cannot depend on a communication mechanism that
2441 requires them to run in the same process space.<br>
|
2442 kumpf 1.12 <b>Note 2: </b>Although the catastrophic failure of an
|
2443 denise.eckstein 1.1 Out-Of-Process (OOP) Provider Module will not result in a
2444 failure of the CIM Server process, if the failed OOP Provider
|
2445 kumpf 1.12 Module included Indication Providers, Indications may be
|
2446 denise.eckstein 1.1 lost. If logging is enabled, the CIM Server will log a
2447 message informing administrators of what happened and what
2448 corrective actions can be taken.<br>
2449 <br>
2450 <table border="1" cellspacing="1" bordercolordark="#666666"
2451 bordercolorlight="#CCCCCC" width=531
2452 style='font-size=10.0pt;font-family:Arial'>
2453 <tr>
2454 <th bgcolor="#CAE6CA" width="168">Platform</th>
2455 <th bgcolor="#CAE6CA" width=350>
2456 Source Configuration File</th>
2457 </tr>
2458 <tr align="center">
2459 <td width="168">Linux</td>
2460 <td align="left" width="350">
2461 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2462 </tr>
2463 <tr align="center">
2464 <td width="168">HP-UX</td>
2465 <td align="left" width="350">
2466 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2467 denise.eckstein 1.1 </tr>
2468 <tr align="center">
2469 <td width="168">OpenVMS</td>
2470 <td align="left" width="350">
2471 Pegasus/Config/DefaultPropertyTableVms.h</td>
2472 </tr>
2473 </table>
2474 </ul>
2475
2476 <h5>home</h5>
2477 <ul>
2478 <b>Description: </b>If set, this configuration option defines
2479 the runtime default value for PEGASUS_HOME.<br>
2480 <b>Default Value: </b>"./"<br>
2481 <b>Recommended Default Value (Development Build)</b>"./"<br>
2482 <b>Recommended Default Value (Release Build)""</b><br>
2483 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2484 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2485 <b>Dynamic?: </b>No<p> <br>
2486 <br>
2487 <table border="1" cellspacing="1" bordercolordark="#666666"
2488 denise.eckstein 1.1 bordercolorlight="#CCCCCC" width=531
2489 style='font-size=10.0pt;font-family:Arial'>
2490 <tr>
2491 <th bgcolor="#CAE6CA" width="168">Platform</th>
2492 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2493 </tr>
2494 <tr align="center">
2495 <td width="168">Linux</td>
2496 <td align="left" width="350">
2497 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2498 </tr>
2499 <tr align="center">
2500 <td width="168">HP-UX</td>
2501 <td align="left" width="350">
2502 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2503 </tr>
2504 <tr align="center">
2505 <td width="168">OpenVMS</td>
2506 <td align="left" width="350">
2507 Pegasus/Config/DefaultPropertyTableVms.h</td>
2508 </tr>
2509 denise.eckstein 1.1 </table>
2510 </ul>
2511
2512 <h5>httpPort</h5>
2513 <ul>
|
2514 kumpf 1.12 <b>Description: </b>OpenPegasus first attempts to look up the
|
2515 denise.eckstein 1.1 port number for HTTP using getservbyname for the 'wbem-http'
|
2516 kumpf 1.12 service. The httpPort configuration setting is used only when the
|
2517 denise.eckstein 1.1 getservbyname lookup fails.<br>
2518 <b>Default Value: </b>blank<br>
2519 <b>Recommended Default Value (Development Build): </b>blank<br>
2520 <b>Recommended Default Value (Release Build): </b>5988<br>
2521 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2522 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2523 <b>Dynamic?: </b>No<br>
|
2524 kumpf 1.12 <b>Considerations: </b>(1)The use of 5988 for WBEM HTTP is
|
2525 denise.eckstein 1.1 recommended by the DMTF. This port has been registered with
2526 <a href="http://www.iana.org/assignments/port-numbers">
2527 IANA</a>. In a production environment, the recommendation is
2528 to use /etc/services to configure the value of this port. (2)
|
2529 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2530 httpPort was changed from 5988 to "". This
|
2531 denise.eckstein 1.1 change was made to allow the OpenPegasus to differentiate
|
2532 kumpf 1.12 between a default setting of 5988 and a customer-defined
|
2533 denise.eckstein 1.1 setting of 5988. With this change, if the port
|
2534 kumpf 1.12 number is explicitly set, the configured port will be used
|
2535 denise.eckstein 1.1 regardless of the settings in /etc/services. If no port number
2536 is specified, the server will continue to use the value in
2537 /etc/services.<br>
2538 <br>
2539 <table border="1" cellspacing="1" bordercolordark="#666666"
2540 bordercolorlight="#CCCCCC" width=531
2541 style='font-size=10.0pt;font-family:Arial'>
2542 <tr>
2543 <th bgcolor="#CAE6CA" width="168">Platform</th>
2544 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2545 </tr>
2546 <tr align="center">
2547 <td width="168">Linux</td>
2548 <td align="left" width="350">
2549 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2550 </tr>
2551 <tr align="center">
2552 <td width="168">HP-UX</td>
2553 <td align="left" width="350">
2554 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2555 </tr>
2556 denise.eckstein 1.1 <tr align="center">
2557 <td width="168">OpenVMS</td>
2558 <td align="left" width="350">
2559 Pegasus/Config/DefaultPropertyTableVms.h</td>
2560 </tr>
2561 </table>
2562 </ul>
2563
2564 <h5>httpsPort</h5>
2565 <ul>
2566 <b>Description: </b>
2567 OpenPegasus first attempts to look up the port number for HTTPS
2568 using getservbyname for the 'wbem-https' service. The httpsPort
|
2569 kumpf 1.12 configuration setting is used only when the getservbyname lookup
|
2570 denise.eckstein 1.1 fails.<br>
2571 <b>Default Value: </b>blank<br>
2572 <b>Recommended Default Value (Development Build): </b>blank<br>
2573 <b>Recommended Default Value (Release Build): </b>5989<br>
2574 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2575 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2576 <b>Dynamic?: </b>No<br>
2577 <b>Considerations: </b>(1)The use of 5989 for WBEM HTTPS
2578 is recommended by the DMTF. This port has been registered with
2579 <a href="http://www.iana.org/assignments/port-numbers">IANA</a>.
|
2580 kumpf 1.12 In a production environment, the recommendation is to use
|
2581 denise.eckstein 1.1 /etc/services to configure the value of this port.(2)
|
2582 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2583 httpPort was changed from 5989 to "". This
2584 change was made to allow the OpenPegasus to differentiate
2585 between a default setting of 5989 and a customer-defined
|
2586 denise.eckstein 1.1 setting of 5989. With this change, if the port number
|
2587 kumpf 1.12 is explicitly set, the configured port will be used regardless
|
2588 denise.eckstein 1.1 of the settings in /etc/services. If no port number is specified,
2589 the server will continue to use the value in /etc/services.<br>
2590 <br>
2591
2592 <table border="1" cellspacing="1" bordercolordark="#666666"
2593 bordercolorlight="#CCCCCC" width=531
2594 style='font-size=10.0pt;font-family:Arial'>
2595 <tr>
2596 <th bgcolor="#CAE6CA" width="168">Platform</th>
2597 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2598 </tr>
2599 <tr align="center">
2600 <td width="168">Linux</td>
2601 <td align="left" width="350">
2602 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2603 </tr>
2604 <tr align="center">
2605 <td width="168">HP-UX</td>
2606 <td align="left" width="350">
2607 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2608 </tr>
2609 denise.eckstein 1.1 <tr align="center">
2610 <td width="168">OpenVMS</td>
2611 <td align="left" width="350">
2612 Pegasus/Config/DefaultPropertyTableVms.h</td>
2613 </tr>
2614 </table>
2615 </ul>
2616
2617 <h5>idleConnectionTimeout</h5>
2618 <ul>
2619 <b>Description: </b>If set to a positive integer, this value
2620 specifies a minimum timeout value for idle client connections.
2621 If set to zero, idle client connections do not time out.<br>
2622 <b>Recommended Default Value (Development Build): </b>0<br>
2623 <b>Recommended Default Value (Release Build): </b>0<br>
2624 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2625 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2626 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2627 denise.eckstein 1.1 <b>Considerations: </b>A client connection is considered
2628 idle when it is not in the process of sending a request and
2629 the CIM Server is not processing a request from that connection.
|
2630 kumpf 1.12 An idle connection timeout allows reclamation of the system
|
2631 denise.eckstein 1.1 resources allocated for idle CIM Server connections. Note that
2632 the CIM Server may allow an idle connection to persist longer
|
2633 kumpf 1.12 than the configured timeout value based on server activity.
2634 Some client applications may not behave correctly if a
|
2635 denise.eckstein 1.1 connection timeout is introduced. Client compatibility should be
2636 considered when configuring an idle connection timeout value.
|
2637 kumpf 1.12 The idle connection time is computed using the system clock.
|
2638 denise.eckstein 1.1 Thus, resetting the system clock may cause unexpected timeout
|
2639 kumpf 1.12 behavior.This config property can be changed dynamically. The
|
2640 kavita.gupta 1.11 changes will apply to all new and existing connections. <br>
|
2641 denise.eckstein 1.1 </ul>
2642
|
2643 venkat.puvvada 1.21 <h5>maxFailedProviderModuleRestarts</h5>
2644 <ul>
2645 <b>Description: </b>If set to a positive integer, this value
2646 specifies the number of times the failed provider module with
2647 indications enabled are restarted automatically before being
2648 moved to Degraded state. If set to zero, failed provider module
2649 is not restarted with indications enabled automatically and
2650 will be moved to Degraded state immediately.<br>
2651 <b>Recommended Default Value (Development Build): </b>3<br>
2652 <b>Recommended Default Value (Release Build): </b>3<br>
2653 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2654 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2655 <b>Dynamic?: </b>Yes<br>
2656 <b>Considerations: </b>This option controls the automatic
2657 re-enabling of the failed provider module with indications
2658 enabled. If the provider module with indications enabled fails
2659 very frequently, it affects the CIMServer normal operations because
2660 CIMServer would be busy with reloading the provider module every
2661 time it fails. This option would be helpful if the long running
2662 indication provider crashes and the management application want
2663 to receive the indications from the provider while provider fix
2664 venkat.puvvada 1.21 is being delivered. In case of provider module grouping, if one of
2665 the indication provider crashes, it affects all indication providers
2666 in the provider modules of the group. Note that this is the facility
2667 provided by the CIMServer for temporary recovery of the provider and
2668 the ultimate goal SHALL be fixing the faulty provider.
2669 </ul>
2670
|
2671 karl 1.24.2.1 <h5>maxIndicationDeliveryRetryAttempts</h5>
2672 <ul>
2673 <b>Description: </b> If set to a positive integer, this value
2674 defines the number of times that the indication service will
2675 try to deliver an indication to a particular listener destination.
2676 This does not effect the original delivery attempt, thus if set to 0,
2677 cimserver will only try to deliver the indication once.<br>
2678 <b>Recommended Default Value (Development Build): </b>3<br>
2679 <b>Recommended Default Value (Release Build): </b>3<br>
2680 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2681 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2682 <b>Dynamic?: </b>No<br>
2683 <b>Considerations: </b> This value is used to set the
2684 CIM_IndicationService.DeliveryRetryAttempts property. See
2685 CIM_IndicationService.DeliveryRetryAttempts property for more details. This
2686 option is supported only when PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT
2687 is defined.<br>
2688 <b>Source Configuration File: </b>
2689 Pegasus/Config/IndicationServicePropertyOwner.cpp<br>
2690 </ul>
2691
2692 karl 1.24.2.1 <h5>minIndicationDeliveryRetryInterval</h5>
2693 <ul>
2694 <b>Description: </b> If set to a positive integer, this value defines
2695 the minimal time interval in seconds for the indication service to wait
2696 before retrying to deliver an indication to a listener destination that
2697 previously failed. Cimserver may take longer due to QoS or other processing.<br>
2698 <b>Recommended Default Value (Development Build): </b>30<br>
2699 <b>Recommended Default Value (Release Build): </b>30<br>
2700 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2701 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2702 <b>Dynamic?: </b>No<br>
2703 <b>Considerations: </b> This value is used to initialize the property
2704 CIM_IndicationService.DeliveryRetryInterval. See
2705 CIM_IndicationService.DeliveryRetryInterval property for more details. This
2706 option is supported only when PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT
2707 is defined.<br>
2708 <b>Source Configuration File: </b>
2709 Pegasus/Config/IndicationServicePropertyOwner.cpp<br>
2710 </ul>
2711
|
2712 denise.eckstein 1.1 <h5>logdir</h5>
2713 <ul>
2714 <b>Description: </b>Specifies the name of the directory
2715 to be used for the OpenPegasus specific log files.<br>
2716 <b>Recommended Default Value (Development Build): </b>logs<br>
2717 <b>Recommended Default Value (Release Build): </b>$LOGDIR<br>
2718 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2719 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2720 <b>Dynamic?: </b>Yes<br>
|
2721 kumpf 1.12 <b>Considerations: </b>This option is not supported if
|
2722 denise.eckstein 1.1 PEGASUS_USE_SYSLOGS is defined.<br>
2723 <b>Source Configuration File: </b>
2724 Pegasus/Config/LogPropertyOwner.cpp<br>
2725 </ul>
2726
2727 <h5>logLevel</h5>
2728 <ul>
|
2729 kumpf 1.12 <b>Description: </b>Defines the desired level of logging.
|
2730 denise.eckstein 1.1 Valid values include: TRACE, INFORMATION, WARNING, SEVERE,
2731 FATAL.<br>
2732 <b>Default Value: </b>"INFORMATION"<br>
2733 <b>Recommended Default Value (Development Build): </b>
2734 "INFORMATION"<br>
2735 <b>Recommended Default Value (Release Build): </b>"SEVERE"<br>
2736 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2737 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2738 <b>Dynamic?: </b>Yes<br>
2739 <b>Considerations: </b><br>
2740 <b>Source Configuration File: </b>
2741 Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2742 </ul>
2743
|
2744 mreddy 1.3 <h5>maxLogFileSizeKBytes</h5>
2745 <ul>
|
2746 kumpf 1.12 <b>Description: </b>Specifies the maximum size of the logfile in Kilo
|
2747 mreddy 1.3 Bytes. If the logfile size exceeds maxLogFileSizeKBytes logfile will be pruned.<br>
2748 <b>Default Value: </b>32768<br>
2749 <b>Recommended Default Value (Development Build): </b> 32768<br>
2750 <b>Recommended Default Value (Release Build): </b>32768<br>
2751 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2752 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/No<br>
2753 <b>Dynamic?:</b> Yes<br>
2754 <b>Considerations:</b> This option is not supported if PEGASUS_USE_SYSLOGS is defined. Minimum accepted value is 32 KB. <br>
2755 <b>Source Configuration File:</b> Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2756 </ul>
|
2757 denise.eckstein 1.1 <h5>maxProviderProcesses</h5>
2758 <ul>
2759 <b>Description:</b> Limits the number of provider
|
2760 kumpf 1.12 processes (see 'forceProviderProcesses) that may run
|
2761 denise.eckstein 1.1 concurrently. A 'maxProviderProcesses' value of '0' indicates
2762 that the number of Provider Agent processes is unlimited<br>
2763 <b>Default Value: </b>0<br>
2764 <b>Recommended Default Value (Development Build):</b> 0<br>
2765 <b>Recommended Default Value (Release Build):</b> 0<br>
2766 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2767 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
|
2768 kavita.gupta 1.9 <b>Dynamic?: </b>Yes<br>
|
2769 kumpf 1.12 <b>Considerations: </b>Consider there are five provider processes
2770 already running and the maxProviderProcesses is dynamically changed to
2771 four. In this case though new provider processes will not be created
|
2772 kavita.gupta 1.9 but existing five will continue running<br>
|
2773 denise.eckstein 1.1 <br>
2774 <table border="1" cellspacing="1" bordercolordark="#666666"
2775 bordercolorlight="#CCCCCC" width=531
2776 style='font-size=10.0pt;font-family:Arial'>
2777 <tr>
2778 <th bgcolor="#CAE6CA" width="168">Platform</th>
2779 <th bgcolor="#CAE6CA" width=350>
2780 Source Configuration File</th>
2781 </tr>
2782 <tr align="center">
2783 <td width="168">Linux</td>
2784 <td align="left" width="350">
2785 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2786 </tr>
2787 <tr align="center">
2788 <td width="168">HP-UX</td>
2789 <td align="left" width="350">
2790 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2791 </tr>
2792 <tr align="center">
2793 <td width="168">OpenVMS</td>
2794 denise.eckstein 1.1 <td align="left" width="350">
2795 Pegasus/Config/DefaultPropertyTableVms.h</td>
2796 </tr>
2797 </table>
2798 </ul>
2799
2800 <h5>messageDir</h5>
2801 <ul>
2802 <b>Description: </b>Specifies the name of the directory to
2803 be used for the OpenPegasus translated messages.<br>
2804 <b>Default Value: </b>msg<br>
2805 <b>Recommended Default Value (Development Build): </b>msg<br>
2806 <b>Recommended Default Value (Release Build):</b>
2807 $MESSAGEDIR/msg<br>
2808 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2809 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2810 <b>Dynamic?: </b>No<br>
2811 <b>Considerations: </b>Only used when message localization
2812 is enabled. See PEGASUS_HAS_MESSAGES for details.<br>
2813 <b>Source Configuration File: </b>
2814 FileSystemPropertyOwner.cpp<br>
2815 denise.eckstein 1.1 </ul>
2816
2817 <h5>providerDir</h5>
2818 <ul>
|
2819 kumpf 1.12 <b>Description: </b>Specifies the names of the directories
|
2820 denise.eckstein 1.1 that contains Provider executables.<br>
2821 <b>Recommended Default Value (Development Build): </b>lib<br>
2822 <b>Recommended Default Value (Release Build): </b>
2823 $PROVIDERDIRS<br>
2824 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2825 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
|
2826 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2827 denise.eckstein 1.1 <b>Considerations: </b>The CIM Server runs as a privileged
2828 user. And, since Providers run in the same process space as the
|
2829 kumpf 1.12 CIM Server, Providers also have privileged access to the
|
2830 denise.eckstein 1.1 system. Allowing a registered Provider’s executable to be
|
2831 kumpf 1.12 replaced with malicious code would result in a critical
|
2832 denise.eckstein 1.1 security defect, giving a malicious user privileged access
2833 to the system. Adminstrators are responsible for ensuring
2834 that only trusted Providers are loaded into providerDir.
2835 In order to simplify the management task associated with
2836 securing Provider executable, the value of providerDir can be
2837 fixed at build time (i.e., set to one or more fixed, well-known
2838 locations).<br>
2839 <b>Source Configuration File: </b>
2840 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2841 </ul>
|
2842 kumpf 1.12
|
2843 denise.eckstein 1.1 <h5>providerManagerDir</h5>
2844 <ul>
2845 <b>Description: </b>Specifies the name of the directory that
2846 contains the ProviderManager plugin libraries.<br>
2847 <b>Recommended Default Value (Development Build): </b>lib<br>
2848 <b>Recommended Default Value (Release Build): </b>
2849 $PROVIDERMANAGERDIRS<br>
2850 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2851 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2852 <b>Dynamic?: </b>No<br>
2853 <b>Considerations: </b>Should be a dedicated directory to
2854 minimize inspection of non-applicable files. Additionally,
2855 since all calls to the providers go through the provider
2856 managers, the same care should be taken with regards to
2857 security for the provider manager directory, as for provider
2858 directories.<br>
2859 <b>Source Configuration File: </b>
2860 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
|
2861 kumpf 1.12 </ul>
|
2862 denise.eckstein 1.1
2863 <h5>repositoryDir</h5>
2864 <ul>
|
2865 kumpf 1.12 <b>Description: </b>Specifies the name of the directory
|
2866 denise.eckstein 1.1 to be used for the OpenPegasus repository.<br>
2867 <b>Recommended Default Value (Development Build): </b>repository<br>
2868 <b>Recommended Default Value (Release Build): </b>
2869 $REPOSITORYDIR/repository<br>
2870 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2871 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2872 <b>Dynamic?: </b>No<br>
2873 <b>Considerations: </b><br>
2874 <b>Source Configuration File: </b>
2875 Pegasus/Config/FileSystemPropertyOwner.cpp<p><br>
2876 </ul>
2877
2878 <h5>repositoryIsDefaultInstanceProvider</h5>
2879 <ul>
|
2880 kumpf 1.12 <b>Description: </b>If true, the Repository functions
2881 as the Instance Provider for all classes for which there
2882 is not an explicitly registered Provider. This flag is
2883 also used to control the behavior of the repository when
|
2884 denise.eckstein 1.1 processing association operators.<br>
2885 <b>Recommended Default Value (Development Build): </b>true<br>
|
2886 kumpf 1.12 <b>Recommended Default Value (Release Build): </b>false<br>
|
2887 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2888 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
2889 <b>Dynamic?: </b>No<br>
2890 <b>Considerations: </b>This flag can be used to configure
2891 the CIM Server to allow the Repository to be used by CIM Clients
2892 and CIM Providers as a dynamic data store. The setting of this
|
2893 kumpf 1.12 flag will significantly affect CIM Server behavior as viewed
2894 by the CIM Client.<br>
2895
2896 The following issues should be considered when setting
|
2897 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=true:
2898
2899 <ul>
|
2900 kumpf 1.12 <li><b>Authorization.</b> The repository has no
|
2901 denise.eckstein 1.1 concept of which users (or components) are authorized to
2902 perform which operations.</li>
2903 <li><b>Appearance of instrumentation.</b> A client application
|
2904 kumpf 1.12 cannot determine whether instrumentation exists for a
2905 given CIM class. For example, imagine a client
2906 issues a CreateInstance operation on a Disk class
|
2907 denise.eckstein 1.1 for which no provider is registered.
2908 The instance will be stored in the repository, and
|
2909 kumpf 1.12 the client gets a "success" response. Does that mean a
|
2910 denise.eckstein 1.1 disk device has been created on the server? Even worse,
|
2911 kumpf 1.12 when another client issues an EnumerateInstances
|
2912 denise.eckstein 1.1 operation, the spurious Disk instance is returned.
2913 With repositoryIsDefaultInstanceProvider=false, the
|
2914 kumpf 1.12 CreateInstance operation above would have returned a
2915 NOT_SUPPORTED error.</li>
|
2916 denise.eckstein 1.1 <li><b>Potential for inconsistent data.</b> Using the
2917 repository as a data cache increases the probability
2918 that a client will see stale or incorrect data. A
|
2919 kumpf 1.12 provider can better control the correlation
|
2920 denise.eckstein 1.1 between the data returned and the current state of the
|
2921 kumpf 1.12 underlying managed resource (whether or not the provider
|
2922 denise.eckstein 1.1 caches the data).</li>
2923 </ul>
2924 <br>
|
2925 kumpf 1.12
2926 The following issues should be considered when setting
|
2927 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=false:
2928
2929 <ul>
2930 <li><b>Provider Availability.</b> Certain Providers have been
|
2931 kumpf 1.12 developed to use the Repository as a dynamic data store.
2932 These Providers are currently not supported on system
|
2933 denise.eckstein 1.1 where this flag is disabled. E.g., the Common Diagnostics
|
2934 kumpf 1.12 Model (CDM) Provider
|
2935 denise.eckstein 1.1 (http://developer.intel.com/design/servers/cdm/)
|
2936 kumpf 1.12 relies on use of the Repository to store instances
2937 of CIM_DiagnosticSetting. If this flag set to
2938 false, this Provider will not function correctly. Note
2939 that this feature is supported by other WBEM
|
2940 denise.eckstein 1.1 implementation. Therefore, disabling this feature
2941 can increase the cost of migrating existing Providers to
2942 OpenPegasus.</li>
|
2943 kumpf 1.12 </ul>
|
2944 denise.eckstein 1.1
|
2945 kumpf 1.12 <b>Source Configuration File: </b>
|
2946 denise.eckstein 1.1 Pegasus/Config/RepositoryPropertyOwner.cpp<br>
2947 </ul>
|
2948 kumpf 1.12
|
2949 denise.eckstein 1.1 <h5>shutdownTimeout</h5>
2950 <ul>
2951 <b>Description: </b>When a cimserver -s shutdown command is
2952 issued, specifies the maximum time in seconds for the CIM Server
2953 to complete outstanding CIM operation requests before shutting
2954 down; if the specified timeout period expires, the CIM Server
|
2955 kumpf 1.12 will shut down, even if there are still CIM operations in
|
2956 denise.eckstein 1.1 progress. Minimum value is 2 seconds.<br>
2957 <b>Recommended Default Value (Development Build): </b>10<br>
2958 <b>Recommended Default Value (Release Build): </b>10<br>
2959 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2960 <b>Recommend To Be Fixed/Hidden (Release Build):</b>No/No<br>
2961 <b>Dynamic?: </b>Yes<br>
2962 <b>Considerations: </b><br>
2963 <b>Source Configuration File: </b>
2964 Pegasus/Config/ShutdownPropertyOwner.cpp<br>
2965 </ul>
2966
2967 <h5>slp</h5>
2968 <ul>
2969 <b>Description: </b>When set to true, OpenPegasus activates
2970 an SLP SA and issues DMTF defined SLP advertisements to this SA
2971 on startup.<br>
2972 <b>Default Value: </b>false<br>
2973 <b>Recommended Default Value (Development Build): </b>false<br>
2974 <b>Recommended Default Value (Release Build): </b>false<br>
2975 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2976 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2977 denise.eckstein 1.1 <b>Dynamic?: </b>No<p> <br>
2978 <br>
2979 <table border="1" cellspacing="1" bordercolordark="#666666"
2980 bordercolorlight="#CCCCCC" width=531
2981 style='font-size=10.0pt;font-family:Arial' height="80">
2982 <tr>
2983 <th bgcolor="#CAE6CA" width="168" height="16">Platform</th>
2984 <th bgcolor="#CAE6CA" width=350 height="16">
2985 Source Configuration File</th>
2986 </tr>
2987 <tr align="center">
2988 <td width="168" height="14">Linux</td>
2989 <td align="left" width="350" height="14">
2990 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2991 </tr>
2992 <tr align="center">
2993 <td width="168" height="14">HP-UX</td>
2994 <td align="left" width="350" height="14">
2995 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2996 </tr>
2997 <tr align="center">
2998 denise.eckstein 1.1 <td width="168" height="16">OpenVMS</td>
2999 <td align="left" width="350" height="16">
3000 Pegasus/Config/DefaultPropertyTableVms.h</td>
3001 </tr>
3002 </table>
3003 </ul>
3004
3005 <h5>socketWriteTimeout</h5>
3006 <ul>
3007 <b>Description: </b>If the CIM Server receives an
3008 EWOULDBLOCK/EAGAIN error on a non-blocking write,
|
3009 kumpf 1.12 socketWriteTimeout defines the number of seconds the
3010 CIM Server will wait for the socket to get ready and resume
|
3011 denise.eckstein 1.1 writing data.<br>
3012 <b>Recommended Default Value (Development Build): </b>
3013 20 (seconds)<br>
3014 <b>Recommended Default Value (Release Build): </b>
3015 20 (seconds)<br>
3016 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3017 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
3018 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
3019 <b>Considerations: </b>Any changes made to this config property
|
3020 kumpf 1.12 dynamically will apply to new CIM Server connections only
|
3021 kavita.gupta 1.11 keeping old already established connections unchanged.<br>
|
3022 denise.eckstein 1.1 <b>Source Configuration File: </b>
3023 Pegasus/Config/DefaultPropertyTable.h
3024 </ul>
3025
3026 <h5>sslCertificateFilePath</h5>
3027 <ul>
|
3028 kumpf 1.12 <b>Description: </b>Contains the CIM Server SSL
|
3029 denise.eckstein 1.1 Certificate.<br>
3030 <b>Recommended Default Value (Development Build): </b>
3031 server.pem<br>
3032 <b>Recommended Default Value (Release Build): </b>
3033 $CERTIFICATEDIR/server.pem"<br>
3034 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3035 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3036 <b>Dynamic?: </b>No<br>
3037 <b>Considerations: </b>For a more detailed look at SSL options
3038 and their ramifications, please see the SSL guidelines.<br>
3039 <b>Source Configuration File: </b>
3040 Pegasus/Config/SecurityPropertyOwner.cpp
3041 </ul>
3042
|
3043 karl 1.24.2.1 <h5>sslCipherSuite</h5>
3044 <ul>
3045 <b>Description: </b>String containing OpenSSL cipher
3046 specifications to configure the cipher suite the client is
3047 permitted to negotiate with the server during the SSL
3048 handshake phase.<br>
3049 <b>Recommended Default Value (Development Build): </b>
3050 DEFAULT (the default cipher list of OpenSSL)<br>
3051 <b>Recommended Default Value (Release Build): </b>
3052 DEFAULT (the default cipher list of OpenSSL)<br>
3053 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3054 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3055 <b>Dynamic?: </b>No<br>
3056 <b>Considerations: </b>The value should be mentioned between
3057 single quotes since it can contain special characters like .+,
3058 !, -.. For more details look at SSL ciphers.<br>
3059 <b>Source Configuration File: </b>
3060 Pegasus/Config/SecurityPropertyOwner.cpp
3061 </ul>
3062
|
3063 denise.eckstein 1.1 <h5>sslClientVerificationMode</h5>
3064 <ul>
3065 <b>Description: </b>Describes the desired level of support
3066 for certificate-based authentication.
3067 <ul style="MARGIN-TOP: 0in" type="circle">
3068 <li>“<b>required</b>” – The server requires certificate-based
|
3069 kumpf 1.12 client authentication. A client MUST present a
|
3070 denise.eckstein 1.1 trusted certificate in order to access the CIM Server.
|
3071 kumpf 1.12 If the client fails to send a certificate or sends an
|
3072 denise.eckstein 1.1 untrusted certificate, the connection will be rejected.</li>
3073 <li>“<b>optional</b>” – The server supports, but does not
|
3074 kumpf 1.12 require, certificate-based client authentication. The
3075 server will request and attempt to validate a client
|
3076 denise.eckstein 1.1 certificate, however the connection will be accepted even
3077 if no certificate is sent or an untrusted certificate is
3078 sent. The server will then seek to authenticate the
3079 client via an authentication header.</li>
|
3080 kumpf 1.12 <li>“<b>disabled</b>” – The server does not support
|
3081 denise.eckstein 1.1 certificate-based client authentication.</li>
3082 </ul>
3083 <b>Recommended Default Value (Development Build): </b>
3084 disabled<br>
3085 <b>Recommended Default Value (Release Build): </b>
3086 disabled<br>
3087 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3088 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3089 <b>Dynamic?: </b>No<br>
3090 <b>Considerations: </b>(1) This property is only used if
3091 <b>enableHttpsConnection</b> is <b>"true"</b>.
3092 (2) If the platform does not support PEGASUS_LOCAL_DOMAIN_SOCKET,
3093 OpenPegasus attempts to use either HTTPS or
|
3094 kumpf 1.12 HTTP to establish a local connection (connectLocal).
|
3095 denise.eckstein 1.1 For platforms that do not support PEGASUS_LOCAL_DOMAIN_SOCKET,
|
3096 kumpf 1.12 Clients which use connectLocal, such as cimconfig -l -c,
|
3097 denise.eckstein 1.1 cimprovider -l -s and cimserver -s, will not work if the
3098 "sslClientVerificationMode" variable is set to
3099 "required" and HTTP is disabled. For these
|
3100 kumpf 1.12 platforms, the recommended course of action is to change the
|
3101 denise.eckstein 1.1 property value to "optional."<br>
3102 <b>Source Configuration File: </b>
3103 Pegasus/Config/SecurityPropertyOwner.cpp
3104 </ul>
3105
3106 <h5>sslKeyFilePath</h5>
3107 <ul>
3108 <b>Description: </b>Contains the private key for the CIM
3109 Server SSL Certificate.<br>
3110 <b>Recommended Default Value (Development Build): </b>
3111 file.pem<br>
3112 <b>Recommended Default Value (Release Build): </b>
3113 $CERTIFICATEDIR/file.pem<br>
3114 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3115 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3116 <b>Dynamic?: </b>No<br>
3117 <b>Considerations: </b>File should be readable only by the
3118 user the cimserver is running as and/or privileged users. The
3119 file should be writeable only by a privileged user.<br>
3120 <b>Source Configuration File: </b>
3121 Pegasus/Config/SecurityPropertyOwner.cpp<br>
3122 denise.eckstein 1.1 </ul>
3123
3124 <h5>sslTrustStore</h5>
3125 <ul>
3126 <b>Description: </b>Specifies the location of the OpenSSL
|
3127 kumpf 1.12 truststore. Consistent with the OpenSSL implementation, a
|
3128 denise.eckstein 1.1 truststore can be either a file or directory. If the truststore
|
3129 kumpf 1.12 is a directory, all the certificates within the directory are
|
3130 denise.eckstein 1.1 considered trusted.<br>
3131 <b>Recommended Default Value (Development Build): </b>
3132 client.pem<br>
3133 <b>Recommended Default Value (Release Build): </b>
3134 $CERTIFICATEDIR/client.pem<br>
3135 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3136 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3137 <b>Dynamic?: </b>No<br>
3138 <b>Source Configuration File: </b>
3139 Pegsus/Config/SecurityPropertyOwner.cpp
3140 </ul>
3141
3142 <h5>sslTrustStoreUserName</h5>
3143 <ul>
3144 <b>Description: </b>Specifies the system user name to be
3145 associated with all certificate-based authenticated requests.<br>
3146 <b>Recommended Default Value (Development Build): </b>NONE<br>
3147 <b>Recommended Default Value (Release Build): </b>NONE<br>
3148 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3149 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3150 <b>Dynamic?: </b>No<br>
3151 denise.eckstein 1.1 <b>Considerations: </b>This property has no default; for
|
3152 kumpf 1.12 security reasons, the system administrator must explicitly
|
3153 denise.eckstein 1.1 specify this value. This feature allows a single user
3154 name to be specified. This user will be associated
3155 with all certificates in the truststore. In the future,
3156 OpenPegasus will allow a system administrator to associate a
3157 distinct user name with each certificate.<br>
3158 <b>Source Configuration File: </b>
3159 Pegsus/Config/SecurityPropertyOwner.cpp<br>
3160 </ul>
3161
3162 <h5>traceComponents</h5>
3163 <ul>
3164 <b>Description: </b>Defines the components to be traced.<br>
3165 <b>Default Value: </b>""<br>
3166 <b>Recommended Default Value (Development Build): </b>""<br>
3167 <b>Recommended Default Value (Release Build): </b>""<br>
3168 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3169 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3170 <b>Dynamic?: </b>Yes<br>
3171 <b>Source Configuration File: </b>
3172 Pegasus/Config/TracePropertyOwner.cpp<br>
3173 </ul>
3174 denise.eckstein 1.1
3175 <h5>traceFacility</h5>
3176 <ul>
|
3177 kumpf 1.12 <b>Description: </b>Defines the desired facility for trace
|
3178 denise.eckstein 1.1 messages. Valid values include: "File"
|
3179 marek 1.14 , "Log" and "Memory" .<br>
|
3180 denise.eckstein 1.1 <b>Default Value: </b>File<br>
3181 <b>Recommended Default Value (Development Build): </b>File<br>
3182 <b>Recommended Default Value (Release Build): </b>File<br>
3183 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3184 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3185 <b>Dynamic?: </b>Yes<br>
3186 <b>Case Sensitive?: </b>No<br>
3187 <b>Considerations: </b>If you specify "File",
|
3188 kumpf 1.12 trace messagesare written into the file specified by the
|
3189 denise.eckstein 1.1 configuration option traceFilePath. If you specify
|
3190 kumpf 1.12 "Log", trace messages are written to the
|
3191 marek 1.14 OpenPegasus Log. If you specify Memory, the trace messages
3192 are collected in a wrap-around memory buffer.
3193 If this memory is part of a dump the trace messages can be
3194 found by the eye-catcher "PEGASUSMEMTRACE" at
3195 the top of the memory buffer. The trace is in clear text and
3196 the last written message has the suffix "EOTRACE".<br>
|
3197 denise.eckstein 1.1 <b>Source Configuration File: </b>
3198 Pegasus/Config/TracePropertyOwner.cpp<br>
3199 </ul>
3200
3201 <h5>traceFilePath</h5>
3202 <ul>
3203 <b>Description: </b>Specifies the location of the
3204 OpenPegasus trace file.<br>
3205 <b>Default Value: </b>cimserver.trc<br>
3206 <b>Recommended Default Value (Development Build):</b>
3207 cimserver.trc<br>
3208 <b>Recommended Default Value (Release Build): </b>
3209 $TRACEDIR/cimserver.trc<br>
3210 <b>Recommend To Be Fixed/Hidden (Development Build):</b>No/No<br>
3211 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3212 <b>Dynamic?: </b>Yes<br>
3213 <b>Source Configuration File: </b>
3214 Pegasus/Config/TracePropertyOwner.cpp<br>
3215 </ul>
3216
3217 <h5>traceLevel</h5>
3218 denise.eckstein 1.1 <ul>
3219 <b>Description: </b></b>Defines the desired level of
3220 tracing. Valid values include: 0, 1, 2, 3, 4, 5.<br>
3221 <b>Default Value: </b>0<br>
3222 <b>Recommended Default Value (Development Build): </b>0<br>
3223 <b>Recommended Default Value (Release Build): </b>0<<br>
3224 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3225 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3226 <b>Dynamic?: </b>Yes<br>
3227 <b>Source Configuration File: </b>
3228 Pegasus/Config/TracePropertyOwner.cpp<br>
3229 </ul>
3230
|
3231 marek 1.14 <h5>traceMemoryBufferKbytes</h5>
3232 <ul>
3233 <b>Description: </b>Defines the size of the buffer for
3234 in memory tracing in kbytes ( 2<sup>10</sup> bytes ).
3235 Smallest value is 16.<br>
3236 <b>Default Value: </b>10240<br>
3237 <b>Recommended Default Value (Development Build): </b>10240<br>
3238 <b>Recommended Default Value (Release Build): </b>10240<br>
3239 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3240 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3241 <b>Dynamic?: </b>No<br>
3242 <b>Case Sensitive?: </b>No<br>
3243 <b>Considerations: </b>Is ignored if configuration
3244 property traceFacility is not set to Memory.<br>
3245 <b>Source Configuration File: </b>
3246 Pegasus/Config/TracePropertyOwner.cpp<br>
3247 </ul>
3248
|
3249 denise.eckstein 1.1 <h3>Configuration Constants</h3>
3250
3251 <h4>Definitions</h4>
3252
3253 <h5>static char CURRENT_CONFIG_FILE [] = </h5>
3254 <ul>
3255 <b>Description: </b>Default file name for the current
3256 configuration file.<br>
3257 <b>Recommended Default Value (Development Build):</b>
3258 cimserver_current.conf<br>
3259 <b>Recommended Default Value (Release Build): </b>
3260 $CONFIGDIR/cimserver_current.conf<br>
3261 <b>Dynamic?: </b>No <br>
3262 <br>
3263 <table border="1" cellspacing="1" bordercolordark="#666666"
3264 bordercolorlight="#CCCCCC" width=531
3265 style='font-size=10.0pt;font-family:Arial'>
3266 <tr>
3267 <th bgcolor="#CAE6CA" width="168">Platform</th>
3268 <th bgcolor="#CAE6CA" width=350>
3269 Source Configuration File</th>
3270 denise.eckstein 1.1 </tr>
3271 <tr align="center">
3272 <td width="168">Linux</td>
3273 <td align="left" width="350">
3274 Pegasus/Config/ConfigFileDirLinux.h</td>
3275 </tr>
3276 <tr align="center">
3277 <td width="168">HP-UX</td>
3278 <td align="left" width="350">ConfigFileDirHpux.h</td>
3279 </tr>
3280 <tr align="center">
3281 <td width="168">OpenVMS</td>
3282 <td align="left" width="350">
3283 Pegasus/Config/ConfigFileDirVms.h</td>
3284 </tr>
3285 </table>
3286 </ul>
3287
3288 <h5>static char PLANNED_CONFIG_FILE [] = </h5>
3289 <ul>
|
3290 kumpf 1.12 <b>Description: </b>Default file name for the planned
|
3291 denise.eckstein 1.1 configuration file.<br>
3292 <b>Recommended Default Value (Development Build): </b>
3293 cimserver_planned.conf<br>
3294 <b>Recommended Default Value (Release Build): </b>
3295 $CONFIGDIR/cimserver_planned.conf<br>
3296 <b>Dynamic?: </b>No<br>
3297 <br>
3298 <table border="1" cellspacing="1" bordercolordark="#666666"
3299 bordercolorlight="#CCCCCC" width=531
3300 style='font-size=10.0pt;font-family:Arial'>
3301 <tr>
3302 <th bgcolor="#CAE6CA" width="168">Platform</th>
3303 <th bgcolor="#CAE6CA" width=350>
3304 Source Configuration File</th>
3305 </tr>
3306 <tr align="center">
3307 <td width="168">Linux</td>
3308 <td align="left" width="350">
3309 Pegasus/Config/ConfigFileDirLinux.h</td>
3310 </tr>
3311 <tr align="center">
3312 denise.eckstein 1.1 <td width="168">HP-UX</td>
3313 <td align="left" width="350">
3314 Pegasus/Config/ConfigFileDirHpux.h</td>
3315 </tr>
3316 <tr align="center">
3317 <td width="168">OpenVMS</td>
3318 <td align="left" width="350">
3319 Pegasus/Config/ConfigFileDirVms.h</td>
3320 </tr>
3321 </table>
3322 </ul>
3323
3324 <h5>static char CIMSERVER_START_FILE [] = </h5>
3325 <ul>
3326 <b>Description: </b>This is for the default file name
3327 for the cimserver startup file containing the PID.<br>
3328 <b>Default Value: </b>/tmp/cimserver_start.conf<br>
3329 <b>Recommended Default Value (Development Build): </b>
3330 /tmp/cimserver_start.conf<br>
3331 <b>Recommended Default Value (Release Build): </b>
3332 $PIDFILE<br>
3333 denise.eckstein 1.1 <b>Dynamic?: </b>No<br>
3334 <br>
3335 <table border="1" cellspacing="1" bordercolordark="#666666"
3336 bordercolorlight="#CCCCCC" width=531
3337 style='font-size=10.0pt;font-family:Arial'>
3338 <tr>
3339 <th bgcolor="#CAE6CA" width="168">Platform</th>
3340 <th bgcolor="#CAE6CA" width=350>
3341 Source Configuration File</th>
3342 </tr>
3343 <tr align="center">
3344 <td width="168">Linux</td>
3345 <td align="left" width="350">
3346 Pegasus/Config/ConfigFileDirLinux.h</td>
3347 </tr>
3348 <tr align="center">
3349 <td width="168">HP-UX</td>
3350 <td align="left" width="350">
3351 Pegasus/Config/ConfigFileDirHpux.h</td>
3352 </tr>
3353 <tr align="center">
3354 denise.eckstein 1.1 <td width="168">OpenVMS</td>
3355 <td align="left" width="350">
3356 Pegasus/Config/ConfigFileDirVms.h</td>
3357 </tr>
3358 </table>
3359 </ul>
3360
3361 <h3>Configuration Macros</h3>
3362
3363 <h4>Definitions</h4>
3364
3365 <h5>PEGASUS_SSLCLIENT_CERTIFICATEFILE</h5>
3366 <ul>
3367 <b>Description: </b><br>
3368 <b>Recommended Default Value (Development Build): </b>client.pem<br>
3369 <b>Recommended Default Value (Release Build): </b>
3370 $CERTIFICATEDIR/client.pem<br>
3371 <b>Dynamic?: </b>No<br>
3372 <b>Source Configuration File: </b>
3373 Pegasus/Common/Constants.h<br>
3374 </ul>
3375 denise.eckstein 1.1
3376 <h5>PEGASUS_SSLCLIENT_RANDOMFILE</h5>
3377 <ul>
3378 <b>Description: </b>On platforms that do not support
|
3379 kumpf 1.12 /dev/random or /dev/urandom, OpenSSL will use this file to
3380 seed the PRNG (Pseudo-Random Number Generator). This
3381 PEGASUS_SSLCLIENT_RANDOMFILE defines the default CIM
|
3382 denise.eckstein 1.1 Client random file.<br>
3383 <b>Recommended Default Value (Development Build):</b>ssl.rnd<br>
3384 <b>Recommended Default Value (Release Build):</b>
3385 $RANDOMDIR/ssl.rnd<br>
3386 <b>Dynamic?: </b>No<br>
3387 <b>Considerations: </b>Use of this variable requires
|
3388 kumpf 1.12 PEGASUS_HAS_SSL to be set. CIM Client use of a
|
3389 denise.eckstein 1.1 shared random file is not recommended. On systems where
3390 /dev/random or /dev/urandom are not available, CIM Clients are
|
3391 kumpf 1.12 encouraged to generate a unique random file which
|
3392 denise.eckstein 1.1 contains sufficient entropy.<br>
3393 <b>Source Configuration File: </b>
3394 Pegasus/Common/Constants.h<br>
3395 </ul>
3396
3397 <h5>PEGASUS_SSLSERVER_RANDOMFILE</h5>
3398 <ul>
|
3399 kumpf 1.12 <b>Description: </b>On platforms that do not support
3400 /dev/random or /dev/urandom, OpenSSL will use this file
3401 to seed the PRNG (Pseudo-Random Number Generator). This
3402 PEGASUS_SSLSERVER_RANDOMFILE defines the CIM Server
|
3403 denise.eckstein 1.1 random file.<br>
3404 <b>Recommended Default Value (Development Build): </b>
3405 cimserver.rnd<br>
3406 <b>Recommended Default Value (Release Build): </b>
3407 $RANDOMDIR/cimserver.rnd<br>
3408 <b>Dynamic?: </b>No<br>
3409 <b>Considerations: </b>1)Use of this variable
3410 requires PEGASUS_HAS_SSL to be set.(2) On systems where
|
3411 kumpf 1.12 /dev/random or /dev/urandom are not available, CIM Server
3412 vendors need to be sure that the cimserver.rnd file
|
3413 denise.eckstein 1.1 contains sufficient entropy and is uniquely generated for
3414 each system.<br>
3415 <b>Source Configuration File: </b>
3416 Pegasus/Common/Constants.h<b><br>
3417 </ul>
3418
3419 <h5>PEGASUS_LOCAL_AUTH_DIR</h5>
3420 <ul>
3421 <b>Description:</b> </b>For local connections (i.e.,
|
3422 kumpf 1.12 connectLocal), OpenPegasus uses a file-based authentication
|
3423 denise.eckstein 1.1 mechanism.<br>
3424 <b>Recommended Default Value (Development Build): </b>/tmp<br>
3425 <b>Recommended Default Value (Release Build): </b>
3426 $LOCALAUTHDIR/localauth<br>
3427 <b>Dynamic?: </b>No<br>
3428 <b>Source Configuration File: </b>
3429 Pegasus/Common/Constants.h<br>
3430 </ul>
3431
3432 <h5>PEGASUS_LOCAL_DOMAIN_SOCKET_PATH</h5>
3433 <ul>
3434 <b>Description: </b><br>
3435 <b>Recommended Default Value (Development Build): </b>
3436 /tmp/cimxml.socket<br>
3437 <b>Recommended Default Value (Release Build): </b>
3438 $SOCKETDIR/cimxml.socket<br>
3439 <b>Dynamic?: </b>No<br>
3440 <b>Source Configuration File: </b>
3441 Pegasus/Common/Constants.h<br>
3442 </ul>
3443
3444 denise.eckstein 1.1 <hr>
|
3445 martin 1.13 <p>Licensed to The Open Group (TOG) under one or more contributor license
3446 agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
3447 this work for additional information regarding copyright ownership.
3448 Each contributor licenses this file to you under the OpenPegasus Open
3449 Source License; you may not use this file except in compliance with the
3450 License.</p>
3451 <p>Permission is hereby granted, free of charge, to any person obtaining a
3452 copy of this software and associated documentation files (the "Software"),
3453 to deal in the Software without restriction, including without limitation
3454 the rights to use, copy, modify, merge, publish, distribute, sublicense,
3455 and/or sell copies of the Software, and to permit persons to whom the
3456 Software is furnished to do so, subject to the following conditions:</p>
3457 <p>The above copyright notice and this permission notice shall be included
3458 in all copies or substantial portions of the Software.</p>
3459 <p>THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
3460 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
3461 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
3462 IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
3463 CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
3464 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
3465 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.</p>
|
3466 denise.eckstein 1.1 <hr>
3467 </body>
3468 </html>
|