1 denise.eckstein 1.1 <html>
2 <head>
|
3 kumpf 1.12 <link rel="stylesheet" href=
|
4 denise.eckstein 1.1 "http://www.opengroup.org/stylesheets/info1.css">
5 </head>
6
7 <body>
8 <hr>
9
10 <p align="center">
11 <b><font size="4">Recommended OpenPegasus Build and Configuration Options for Selected Platforms</font></b>
12 </p>
13
14 <hr>
15
16 <p><b>Abstract: </b>
17 This document defines a set of recommended options for building,
|
18 kumpf 1.12 testing and running OpenPegasus on a selected set of
|
19 denise.eckstein 1.1 platforms. In this version of the document, platform-specific configuration
20 information have been documented for the platforms described in the
21 "Documented Platforms" section of this document.
22 </p>
23
24 <p><b>Note 1: </b>
25 The recommendations defined in this document are not intended to document
26 the feature set included in any vendor's OpenPegasus-based product.
27 Rather, the purpose of this document is to provide input to vendors when
28 making product decisions.<BR>
29 </p>
30
31 <hr>
32
33 <h2>Definition of the Problem</h2>
34
35 <p>OpenPegasus supports a large number of build and runtime options.
36 Determining which options to use can be challenging. The purpose of this
37 document is to simplify the build, testing and administration of OpenPegasus
38 by providing a recommended, tested set of options.</p>
39
40 denise.eckstein 1.1 <h2>Documented Platforms</h2>
41
42 <p>Support for the OpenPegasus build and runtime options described in
|
43 kumpf 1.12 this document varies by platform. In this version of the
44 document, platform-specific configuration information has been included
|
45 denise.eckstein 1.1 for the platforms described in the following table. For all other
|
46 kumpf 1.12 platforms, please consult the OpenPegasus Platform Advocate for
|
47 denise.eckstein 1.1 additional information.</p>
48
49 <ul>
50 <table border="1" cellspacing="1" bordercolordark="#666666"
51 bordercolorlight="#CCCCCC" width=20%>
52 <tr>
53 <th bgcolor="#CAE6CA" align=center>Platform</th>
54 <th bgcolor="#CAE6CA" align=center>Status</th>
55 </tr>
56 <tr align="left">
57 <td>HPUX_IA64_ACC</td>
58 <td> </td>
59 </tr>
60 <tr align="left">
61 <td>HPUX_PARISC_ACC</td>
62 <td> </td>
63 </tr>
64 <tr align="left">
65 <td>LINUX_IA64_GNU</td>
66 <td> </td>
67 </tr>
68 denise.eckstein 1.1 <tr align="left">
69 <td>LINUX_IX86_GNU</td>
70 <td> </td>
71 </tr>
72 <tr align="left">
73 <td>LINUX_PPC64_GNU</td>
74 <td> </td>
75 </tr>
76 <tr align="left">
77 <td>LINUX_PPC_GNU</td>
78 <td> </td>
79 </tr>
80 <tr align="left">
81 <td>LINUX_XSCALE_GNU</td>
82 <td> </td>
83 </tr>
84 <tr align="left">
85 <td>LINUX_ZSERIES64_GNU</td>
86 <td> </td>
87 </tr>
88 <tr align="left">
89 denise.eckstein 1.1 <td>LINUX_ZSERIES_GNU</td>
90 <td> </td>
91 </tr>
92 <tr align="left">
93 <td>VMS_ALPHA_DECCXX</td>
94 <td> </td>
95 </tr>
96 <tr align="left">
97 <td>VMS_IA64_DECCXX</td>
98 <td> </td>
99 </tr>
100 </table>
101 </ul>
102
103 <h2>Proposed Solution</h2>
104
105 <h3>Security Considerations</h3>
106 <ol>
107 <li>
108 To avoid introducing security vulnerabilities, vendors must never
109 ship providers incompatible with the security assumptions used in
|
110 kumpf 1.12 their deployment.
111 For example, providers designed for a single-user deployment that
112 don't perform authorization must not be shipped with a CIM Server
113 that expects the providers to perform authorization. Note that
|
114 denise.eckstein 1.1 this authorization burden is considerably lighter if the provider
115 is registered as 'run as requestor' and if the CIM Server enables
116 that feature. See <a href=
117 "http://www.openpegasus.org/pp/uploads/40/7197/SecurityGuidePEP.htm">
118 PEP#223 - Security Coding Guidelines</a> for additional
119 details.
120 </li>
121 <li>
122 Vendors should ensure they configure the CIM Server consistently
123 with the security requirements of their deployment.
124 </li>
125 </ol>
126
127 <h3>Terminology Notes</h3>
128 <ol>
129 <li>
130 In this document, the term "Not Set" is used to indicate
131 that the a value for the environment variable has not been defined.
|
132 kumpf 1.12 "Set" is used to indicate that the value must be defined,
|
133 denise.eckstein 1.1 but the actual value of the variable is not checked.
134 </li>
135 </ol>
136
137 <h3>General Notes</h3>
138
139 <ol>
140 <li>
|
141 kumpf 1.12 Not all functionality described in this document has achieved
|
142 denise.eckstein 1.1 "Green"status, please refer to the
143 <a href="http://www.openpegasus.org/page.tpl?CALLER=index.tpl&ggid=799">
144 OpenPegasus Project Feature Status </a>page for information on
145 the maturity level of OpenPegasus features.
146 </li>
147 <li>
148 To encourage testing of new functionality, recommendations for the
149 Development Build may include features that are not yet recommended
150 for Release Builds.
151 </li>
152 </ol>
153
154 <h3>Environment Variable Settings for <u>Building</u> OpenPegasus</h3>
155
156 <h4>Definitions</h4>
157
158 <h5>ICU_INSTALL</h5>
159 <ul>
160 <b>Description: </b>When set, points to the directory containing
161 the <a href="%20http:/oss.software.ibm.com/icu"> ICU(International
|
162 kumpf 1.12 Components for Unicode)</a> installation. The 'include'
|
163 denise.eckstein 1.1 subdirectory is used to locate ICU header files at build time. The
164 'lib' subdirectory is used to locate ICU libraries at link
165 time.<br>
166 <b>Default Value: </b>Not Set<br>
167 <b>Recommended Value (Development Build): </b>Not Set<br>
168 <b>Recommended Value (Release Build): </b>Not Set<br>
169 <b>Required: </b>No. However, if PEGASUS_HAS_ICU is
170 set and ICU_INSTALL is not defined, the ICU libraries and header
171 files are expected to be installed in directories (e.g.,/usr/lib,
172 /usr/include) that are searched by default.<br>
173 <b>Considerations: </b>This environment variable is only used
174 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
175 additional details.
176 </ul>
177
178 <h5>ICU_NO_UPPERCASE_ROOT</h5>
179 <ul>
180 <b>Description: </b>If set, the messages in the root resource
181 bundle will NOT be capitalized. By default, the root resource
182 bundle is capitalized.<br>
183 <b>Default Value: </b>Not Set<br>
184 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>Not Set<br>
185 <b>Recommended Value (Release Build): </b>Not Set<br>
186 <b>Required: </b>No<br>
|
187 kumpf 1.12 <b>Considerations: </b>This environment variable is only used
188 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
|
189 denise.eckstein 1.1 additional details.
190 </ul>
191
192 <h5>ICU_ROOT_BUNDLE_LANG</h5>
193 <ul>
194 <b>Description: </b>If set, specifies the language
195 to be used to generate the root resource bundle. The
196 default value for ICU_ROOT_BUNDLE_LANG is _en.<br>
197 <b>Default Value: </b>_en<br>
198 <b>Recommended Value (Development Build): </b>No
199 Recommendation<br>
200 <b>Recommended Value (Release Build): </b>No Recommendation<br>
201 <b>Required: </b>No<br>
202 <b>Considerations: </b>This environment variable is
203 only used if PEGASUS_HAS_MESSAGES is set. Refer to
204 PEGASUS_HAS_MESSAGES for additional details.<br>
205 If set, resource bundles for the designated language must
206 exist for the following files:
207 <ul>
208 <li>pegasus/src/Pegasus/msg/Server/pegasusServer_en.txt</li>
209 <li>pegasus/src/Pegasus/msg/Listener/pegasusListener_en.txt</li>
210 denise.eckstein 1.1 </ul>
211 </ul>
212
213
214 <h5>OPENSSL_BIN</h5>
215 <ul>
216 <b>Description: </b>Specifies the location of the
217 OpenSSL <i>binary</i> directory. <br>
218 <b>Default Value: </b>Not Set<br>
219 <b>Recommended Value (Development Build): </b>
220 No Specific Recommendation<br>
221 <b>Recommended Value (Release Build): </b>
222 No Specific Recommendation<br>
223 <b>Required: </b>No. By default, the openssl binary is
224 expected to be installed in a directory that is searched by default
225 (e.g., /usr/bin). For platforms where this isn't true, the
226 OPENSSL_BIN environment variable may be used to define an
|
227 kumpf 1.12 alternative path. This environment variable is only used if
|
228 denise.eckstein 1.1 PEGASUS_HAS_SSL is set.
229 </ul>
230
231 <h5>OPENSSL_HOME</h5>
232 <ul>
233 <b>Description: </b>Specifies the location of the OpenSSL
234 SDK directory. This directory must contain the OpenSSL
235 <i>include</i> directory, $(OPENSSL_HOME)/include, and the OpenSSL
236 <i>library</i> directory, $(OPENSSL_HOME)/lib.<br>
237 <b>Default Value: </b>Not Set<br>
238 <b>Recommended Value (Development Build): </b>
239 No Specific Recommendation<br>
240 <b>Recommended Value (Release Build): </b>
241 No Specific Recommendation<br>
242 <b>Required: </b>Yes for Windows, if PEGASUS_HAS_SSL
243 is set. No for all other platforms. For AIX, the default
|
244 kumpf 1.12 value for OPENSSL_HOME is /usr/linux. For all other
|
245 denise.eckstein 1.1 platforms, the OpenSSL include files and libraries are expected
246 to be installed in directories that are searched by default (e.g.,
|
247 kumpf 1.12 /usr/bin, /usr/lib(64), and /usr/include).
|
248 denise.eckstein 1.1 For platforms where the default value is not correct, the
249 OPENSSL_HOME environment variable may be used to define an
250 alternative path (i.e., $(OPENSSL_HOME)/lib and
251 $(OPENSSL_HOME)/include). This environment variable
252 is only used if PEGASUS_HAS_SSL is set.
253 </ul>
254
255 <h5>PEGASUS_ALLOW_ABSOLUTEPATH_IN_PROVIDERMODULE</h5>
256 <ul>
257 <b>Description: </b>If set to true, a version of OpenPegasus
258 will be built that allows an absolute path to be specified as the
259 value of the Location property of PG_ProviderModule class.
260 Otherwise it does not allow the absolute path to be specified.<br>
261 <b>Default Value: </b>Not Set<br>
|
262 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
263 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
264 <b>Required: </b>No<p>
265 <b>Considerations: </b>To avoid introducing security
266 vulnerabilities, vendors should analyze their deployment
267 environments to understand the security implications of allowing
268 providers to be loaded from a dynamically changing set of
269 directories.<br>
270 </ul>
271
272 <h5>PEGASUS_CCOVER</h5>
273 <ul>
274 <b>Description: </b>This flag is currently only supported on
|
275 kumpf 1.12 HP-UX. It is enabled on the Nightly Build & Test system,
|
276 denise.eckstein 1.1 HP-UX_11iv3_Integrity_C-Cover. This system is
|
277 kumpf 1.12 used to generate the nightly BullseyeCoverage code coverage
|
278 denise.eckstein 1.1 metrics.<br>
279 <b>Default Value: </b>Not Set<br>
|
280 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
281 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
282 <b>Required: </b>No<br>
|
283 kumpf 1.12 <b>Considerations: </b>This flag is only supported on HP-UX to enable
|
284 denise.eckstein 1.1 CCOVER for the NB&T system.<br>
285 </ul>
286
287 <h5>PEGASUS_CIM_SCHEMA</h5>
288 <ul>
289 <b>Description: </b>This variable is used internally by the
|
290 kumpf 1.12 OpenPegasus development team when upgrading the OpenPegasus build
|
291 denise.eckstein 1.1 environment to a new version of the CIM Schema.<br>
292 <b>Default Value: </b>CIM217<br>
293 <b>Recommended Value (Development Build): </b>
294 No Specific Recommendation<br>
295 <b>Recommended Value (Release Build): </b>
296 No Specific Recommendation<br>
297 <b>Required: </b>No <br>
|
298 kumpf 1.12 <b>Considerations:</b> Additional code changes may be required when
299 upgrading or downgrading the CIM Schema version.</p>
|
300 denise.eckstein 1.1 </ul>
301
302 <h5>PEGASUS_CLASS_CACHE_SIZE</h5>
303 <ul>
304 <b>Description: </b>This environment variable gives the size of
305 the class cache used by CIM repository. This variable defines the
306 size of the class cache (i.e., the maximum number of classes that
|
307 kumpf 1.12 may be included). If this variable is set to 0, class caching is
|
308 denise.eckstein 1.1 disabled.<br>
309 <b>Default Value: </b>8<br>
310 <b>Recommended Value (Development Build): </b>8<br>
311 <b>Recommended Value (Release Build): </b>8<br>
|
312 kumpf 1.12 <b>Required: </b>No </p>
|
313 denise.eckstein 1.1 </ul>
314
315 <h5>PEGASUS_DEBUG</h5>
316 <ul>
|
317 kumpf 1.12 <b>Description: </b>Builds a debug version of OpenPegasus.
318 Concurrently, this flag controls a) enabling compiler specific
319 debug flags and b) the inclusion of debug-specific
|
320 denise.eckstein 1.1 functionality.<br>
321 <b>Default Value: </b>Not Set<br>
322 <b>Recommended Value (Development Build): </b>Set<br>
323 <b>Recommended Value (Release Build): </b>Not Set<br>
324 <b>Required: </b>No
325 </ul>
326
327 <h5>PEGASUS_DEFAULT_USERCTXT_REQUESTOR</h5>
328 <ul>
329 <b>Description: </b> If set to true, the <i>Requestor</i> user
330 context is used for providers that do not specify a UserContext
331 value in their registration. Otherwise, the <i>Privileged</i> user
332 context value is used by default. <br>
333 <b>Default Value: </b>false<br>
334 <b>Recommended Value (Development Build): </b>false<br>
335 <b>Recommended Value (Release Build): </b>false<br>
336 <b>Required: </b>No
337 <b>Considerations:</b> Use of the <i>Requestor</i> default has
338 improved provider security characteristics. However, some providers
339 may not operate correctly when run in the <i>Requestor</i> user
340 context and setting this value to true may cause those providers to
341 denise.eckstein 1.1 fail. Providers that can run in the <i>Requestor</i>
342 user context are encouraged to explicitly set the UserContext value
343 in their registration rather than rely on the default setting
|
344 kumpf 1.12 default by this variable. Please refer to
|
345 denise.eckstein 1.1 SecurityGuidelinesForDevelopers.html. PEP 223 for a discussion
|
346 kumpf 1.12 of the rationale/advantages of running providers in the
|
347 denise.eckstein 1.1 <i>Requestor </i> user context. <b>Note:</b> This build
|
348 kumpf 1.12 variable is not meaningful if the Provider User Context feature is
349 disabled with the PEGASUS_DISABLE_PROV_USERCTXT
|
350 denise.eckstein 1.1 setting.
351 </ul>
352
353
354 <h5>PEGASUS_DEFAULT_ENABLE_OOP</h5>
355 <ul>
356 <b>Description: </b>When this variable is set to false, by
357 default, Providers are run in the cimserver process
|
358 kumpf 1.12 (forceProviderProcesses=false). If this value is set true,
|
359 denise.eckstein 1.1 Providers are run out-of-process by default.<br>
360 <b>Default Value: </b>true for HP-UX and Linux, false for
361 other platforms<br>
362 <b>Recommended Value (Development Build): </b>true (HP-UX,
363 Linux)<br>
364 <b>Recommended Value (Release Build): </b>true (HP-UX,
365 Linux)<br>
366 <b>Required: </b>No<br>
|
367 kumpf 1.12 <b>Considerations: </b>This environment variable can be used to
|
368 denise.eckstein 1.1 change the "hard-coded" default setting for the
369 forceProviderProcesses configuration value.
370 Refer to the definition of <b>forceProviderProcesses</b> for
371 additional information.
372 </ul>
373
374 <h5>PEGASUS_DEST_LIB_DIR</h5>
375 <ul>
376 <b>Description: </b>Specifies the location of OpenPegasus
377 shared libraries.<br>
378 <b>Default Value: </b>$(PEGASUS_HOME)/lib<br>
379 <b>Recommended Value (Development Build): </b>
380 $(PEGASUS_HOME)/lib<br>
381 <b>Recommended Value (Release Build): </b>
382 No Specific Recommendation <br>
383 <b>Required: </b>No<br>
384 <b>Considerations: </b>This variable is NOT is used to define
|
385 kumpf 1.12 the location of the Provider library directories.
|
386 denise.eckstein 1.1 Please refer to the providerDir configuration option for details
387 on defining the directories for the Provider libraries.
388 </ul>
389
390
391 <h5>PEGASUS_DISABLE_DEPRECATED_INTERFACES</h5>
392 <ul>
|
393 kumpf 1.12 <b>Description: </b>Removes deprecated symbol definitions
|
394 denise.eckstein 1.1 from OpenPegasus runtime libraries.<br>
395 <b>Default Value:</b> Not Set<br>
396 <b>Recommended Value (Development Build):</b> Not Set<br>
397 <b>Recommended Value (Release Build): </b>Not Set<br>
398 <b>Required: </b>No<br>
399 <b>Considerations: </b>If this option is set, the resulting
|
400 kumpf 1.12 OpenPegasus libraries will not be binary compatible with
401 clients and providers built using interface definitions from
|
402 denise.eckstein 1.1 prior releases. This option may be used to slightly reduce binary
403 footprint in an environment where compatibility is not required.<br>
404 </ul>
405
406 <h5>PEGASUS_DISABLE_INSTANCE_QUALIFIERS</h5>
407 <ul>
408 <b>Description: </b>In the CIM Infrastructure Specification,
409 version 2.3, the DMTF clarified that instance-level qualifiers are
410 not allowed. In Version 1.2 of the Specification CIM
411 Operations over HTTP, use of the IncludeQualifiers parameter has
412 been DEPRECATED.<br>
413 <b>Default Value:</b> Not Set<br>
414 <b>Recommended Value (Development Build):</b> Not Set<br>
415 <b>Recommended Value (Release Build): </b>Not Set<br>
416 <b>Required: </b>No<br>
417 <b>Considerations: </b>Existing CIM Clients may depend on
|
418 kumpf 1.12 qualifiers being returned in the response. In this case, the
419 PEGASUS_DISABLE_INSTANCE_QUALIFIERS should not be set.
|
420 denise.eckstein 1.1 If this flag is set, the value of the IncludeQualifiers parameter
421 passed on the GetInstance and EnumerateInstance operations is
|
422 kumpf 1.12 ignored and qualifiers are not returned.
|
423 denise.eckstein 1.1 Disabling the return of qualifiers as part of a CIM Instance will
424 improve performance.<br>
425 </ul>
426
427 <h5>PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET</h5>
428 <ul>
429 <b>Description: </b>Disables support for local (same-system)
430 connections over a Unix domain socket. If this option is NOT set,
|
431 kumpf 1.12 the CIM Server is built to allow connections to be established
|
432 denise.eckstein 1.1 using a domain socket rather than a TCP port.<br>
433 <b>Default Value: </b>Not Set <br>
434 <b>Recommended Value (Development Build): </b>Not Set<br>
435 <b>Recommended Value (Release Build): </b>Not Set<br>
436 <b>Required: </b>No<br>
437 <b>Considerations: </b>(1) In high-threat environments, a
438 customer may want to disable all ports or reduce the number of
|
439 kumpf 1.12 exposed network ports. Supporting a local connection mechanism
|
440 denise.eckstein 1.1 using Unix domain socket allows the CIM Server to continue to
441 receive and process requests from local CIM Clients. (2)
442 Enabling this option may result in lose of functionality when
443 sslClientVerificationMode = required. (3)The
444 "LOCAL_DOMAIN_SOCKET" functionality has not been
445 implemented for Windows or OpenVMS. Therefore, by
|
446 kumpf 1.12 default, this option is "Set" for Windows and OpenVMS
|
447 denise.eckstein 1.1 platforms.
448 </ul>
449
450 <h5>PEGASUS_DISABLE_PERFINST</h5>
451 <ul>
452 <b>Description: </b>Builds a version of OpenPegasus that
453 disables support for gathering performance data.<br>
454 <b>Default Value: </b>Not Set<br>
455 <b>Recommended Value (Development Build): </b>Not Set<br>
456 <b>Recommended Value (Release Build): </b>Set<br>
457 <b>Required: </b>No<br>
458 <b>Considerations: </b>The CIM_ObjectManager.GatherStatisticalData
459 property is used to control statistic gathering. Once enabled,
460 statistical data can be viewed by retrieving instances of the
461 CIM_StatisticalData class. Support for gathering performance
462 data requires PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
463 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
464 to false), then PEGASUS_DISABLE_PERFINST must be set to
465 true. If PEGASUS_DISABLE_PERFINST is not defined or set to
466 false and PEGASUS_ENABLE_INTEROP_PROVIDER is not set,
467 PEGASUS_ENABLE_INTEROP_PROVIDER will be automatically enabled.
468 denise.eckstein 1.1 </ul>
|
469 kumpf 1.12
|
470 denise.eckstein 1.1 <h5>PEGASUS_DISABLE_PRIVILEGED_TESTS</h5>
471 <ul>
472 <b>Description: </b>This variable is used only in the development
|
473 kumpf 1.12 environment to restrict the level of testing performed by default.
474 If set, tests that require the CIM Server to run in a privileged
475 mode will not be run. Setting this variable allows
|
476 denise.eckstein 1.1 developers, without privileged access, to successfully run a
477 subset of the OpenPegasus test suit. This variable does
478 not affect CIM Server functionality. It merely controls
479 the level of testing.<br>
480 <b>Default Value: </b>Not Set<br>
481 <b>Recommended Value (Development Build): </b>Not Set<br>
482 <b>Recommended Value (Release Build): </b>Not Used<br>
483 <b>Required: </b>No<br>
484 <b>Considerations: </b>Enabling this variable will significantly
|
485 kumpf 1.12 reduce the testing of security related features (e.g.,
|
486 denise.eckstein 1.1 authentication and authorization) and can affect testing in other
487 areas.
488 </ul>
489
490 <h5>PEGASUS_DISABLE_PROV_USERCTXT</h5>
491 <ul>
492 <b>Description: </b>Builds a version of OpenPegasus that
493 disables supports for the Provider User Context feature.
494 This feature allows a Provider to choose the user context in
495 which it is invoked, including the ability to run in the context of
496 the user requesting an operation.<br>
497 <b>Default Value: </b>Set for Windows and OpenVMS, Not Set
498 for all other platforms<br>
499 <b>Recommended Value (Development Build): </b>Set for Windows and
500 OpenVMS, Not Set for all other platforms<br>
501 <b>Recommended Value (Release Build): </b>Set for Windows and
502 OpenVMS, Not Set for all other platforms<br>
503 <b>Required: </b>No<br>
504 <b>Considerations: </b>The Provider User Context feature may be
505 disabled by compiling with the PEGASUS_DISABLE_PROV_USERCTXT flag
506 defined. In this case, the Provider Registration Manager rejects
507 denise.eckstein 1.1 provider registration requests that specify a UserContext property
508 value. The user context in which providers run is then unchanged by
|
509 kumpf 1.12 this enhancement. Some platforms, such as OS/400 and z/OS may
|
510 denise.eckstein 1.1 define the PEGASUS_DISABLE_PROV_USERCTXT as part of the platform
511 configuration, since these platforms already set the provider user
512 context on a per-thread basis. When the Provider User Context
513 feature is enabled, support for each of the User Context types may
|
514 kumpf 1.12 be disabled individually. Provider registration fails when an
|
515 denise.eckstein 1.1 unsupported UserContext value is specified. Please refer to
|
516 kumpf 1.12 SecurityGuidelinesForDevelopers.html / PEP 223 for a discussion of
517 the rationale/advantages of user context providers to many
|
518 denise.eckstein 1.1 platforms.<br>
519 </ul>
520
|
521 s.kodali 1.13.2.3 <h5>PEGASUS_EXTRA_PROVIDER_LIB_DIR</h5>
522 <ul>
523 <b>Description: </b>Specifies the location of the extra provider
524 libraries which are part of the release builds.<br>
525 <b>Default Value: </b>Not Set<br>
526 <b>Recommended Value (Development Build): </b>
527 No Specific Recommendation<br>
528 <b>Recommended Value (Release Build): </b>
529 No Specific Recommendation<br>
530 <b>Required: </b> No.<br>
531 <b>Considerations: </b> Since providerDir config property is fixed
532 and hidden in release builds, this build time option provides facilty
533 to include the extra provider directories without any security problems.
534 This build time option is useful only when PEGASUS_OVERRIDE_DEFAULT_RELEASE_DIRS
535 is set.
536 </ul>
537
|
538 denise.eckstein 1.1 <h5>PEGASUS_EMANATE_INCLUDE_DIR</h5>
539 <ul>
540 <b>Description: </b>Specifies the location of the EMANATE
541 <i>include</i> directory. <br>
542 <b>Default Value: </b>Not Set<br>
543 <b>Recommended Value (Development Build): </b>
544 No Specific Recommendation<br>
545 <b>Recommended Value (Release Build): </b>
546 No Specific Recommendation<br>
547 <b>Required: </b>No. By default, the EMANATE include files
548 are expected to be installed in directories that are searched by
549 default (e.g., /usr/include). For platforms where this isn't true,
|
550 kumpf 1.12 the PEGASUS_EMANATE_INCLUDE_DIR environment variable may be used to
551 define an alternative path. This environment variable is only used
|
552 denise.eckstein 1.1 if PEGASUS_USE_EMANATE is set.<br>
|
553 kumpf 1.12 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
|
554 denise.eckstein 1.1 for additional details.<br>
555 </ul>
556
557 <h5>PEGASUS_EMANATE_LIB_DIR</h5>
558 <ul>
559 <b>Description: </b>Specifies the location of the EMANATE
560 <i>lib</i> directory. <br>
561 <b>Default Value: </b>Not Set<br>
562 <b>Recommended Value (Development Build): </b>
563 No Specific Recommendation<br>
564 <b>Recommended Value (Release Build): </b>
565 No Specific Recommendation<br>
|
566 kumpf 1.12 <b>Required: </b>No. By default, the EMANATE libraries are
567 expected to be installed in directories that are searched by
568 default (e.g., /usr/lib, /usr/lib64). For platforms where this
|
569 denise.eckstein 1.1 isn't true, the PEGASUS_EMANATE_LIB_DIR environment variable may
570 be used to define an alternative path. This environment variable
571 is only used if PEGASUS_USE_EMANATE is set.<br>
572 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
573 for additional details.<br>
574 </ul>
575
576 <h5>PEGASUS_ENABLE_AUDIT_LOGGER</h5>
577 <ul>
578 <b>Description: </b>When this variable is set to false, support
579 for audit logging will NOT be built into OpenPegasus. If this
580 variable is set to true, or not set, support for audit logging
581 will be included in the build. All other values are invalid.<br>
582 <b>Default Value: </b>true<br>
583 <b>Recommended Value (Development Build): </b>true<br>
584 <b>Recommended Value (Release Build): </b>true<br>
585 <b>Required: </b>No<br>
586 </ul>
587
588
589 <h5>PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER</h5>
590 denise.eckstein 1.1 <ul>
591 <b>Description: </b>If set to true, a version of OpenPegasus
592 that supports CMPI providers and their dependent components is
593 built. If this variable is not set or set to false, support
594 for CMPI providers will not be included. <br>
595 <b>Default Value: </b>true for Linux and OpenVMS, false for
596 other platforms<br>
|
597 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (Linux
|
598 denise.eckstein 1.1 Platform Only)<br>
599 <b>Recommended Value (Release Build): </b>true (Linux Platform
600 Only)<br>
601 <b>Required: </b>No</p>
602 </ul>
603
604 <h5>PEGASUS_ENABLE_COMPRESSED_REPOSITORY</h5>
605 <ul>
606 <b>Description: </b>If set the Repository Compression logic is
607 built and enabled and compressed and non compressed repositories
608 are supported. If not set then compressed repositories are not
609 supported.<br>
610 <b>Default Value: </b>Not Set<br>
611 <b>Recommended Value (Development Build): </b>Not Set<br>
612 <b>Recommended Value (Release Build): </b>Not Set<br>
613 <b>Required: </b>No<p>
|
614 kumpf 1.12 <b>Considerations: </b>See
|
615 denise.eckstein 1.1 pegasus/readme.compressed_repository</p>
616 </ul>
617
618
619 <h5>PEGASUS_ENABLE_CQL</h5>
620 <ul>
621 <b>Description: </b>When this variable is set to false, support
622 for Indication Subscription filters that have CQL as the language
623 is disabled. It does not remove CQL from the build.<br>
624 <b>Default Value:</b> Not Set<br>
625 <b>Recommended Value (Development Build):</b> Not Set<br>
626 <b>Recommended Value (Release Build):</b> false<br>
627 <b>Required: </b>No<br>
|
628 kumpf 1.12 <b>Considerations: </b>The DMTF CIM Query Language
629 Specification is Preliminary and subject to backward incompatible
630 changes.
|
631 denise.eckstein 1.1 </ul>
632
633 <h5>PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT</h5>
634 <ul>
635 <b>Description: </b>When this variable is set to true, support the
636 DMTF Indications Profile (DSP1054) is included in OpenPegasus.
637 If this variable is not set or set to false, support for the DMTF
638 Indications Profile will not be included.<br>
639 <b>Default Value:</b> Not Set<br>
640 <b>Recommended Value (Development Build):</b> Not Set<br>
641 <b>Recommended Value (Release Build):</b> Not Set<br>
642 <b>Required: </b>No<br>
643 <b>Considerations: </b>The implementation of this feature is
644 based on a preliminary version of the DMTF Indications Profile,
645 DSP1053, and subject to change. If this variable is enabled,
|
646 kumpf 1.12 two DMTF experimental class definitions, CIM_IndicationService and
647 CIM_IndicationServiceCapabilities, will be added to the
|
648 denise.eckstein 1.1 root/PG_InterOp namespace. Experimental class definitions are
649 subject to change.
|
650 kumpf 1.12 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT requires
|
651 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled.
652 If PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
653 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT to true, will also
654 enable PEGASUS_ENABLE_INTEROP_PROVIDER. If
655 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
656 to false), a build error will be generated.
657 </ul>
658
659 <h5>PEGASUS_ENABLE_EXECQUERY</h5>
660 <ul>
661 <b>Description: </b>When this environment variable is set,
|
662 kumpf 1.12 processing of ExecQuery operations is enabled. When not set,
|
663 denise.eckstein 1.1 ExecQuery operation requests get a NotSupported response. (Note:
664 The PEGASUS_ENABLE_EXECQUERY environment variable controls
665 the definition of the PEGASUS_DISABLE_EXECQUERY compile macro.) <br>
666 <b>Default Value: </b>Not Set<br>
667 <b>Recommended Value (Development Build): </b>Not Set<br>
668 <b>Recommended Value (Release Build): </b>Not Set<br>
669 <b>Required: </b>No
670 </ul>
671
672 <h5>PEGASUS_ENABLE_EMAIL_HANDLER</h5>
673 <ul>
674 <b>Description: </b> When this environment variable is set, an
|
675 kumpf 1.12 E-Mail Indication Handler is built as part of the OpenPegasus
676 build. The E-Mail Indication Handler can be used to
|
677 denise.eckstein 1.1 delivered CIM Indications to a designated e-mail address.<br>
678 <b>Default Value: </b>Not Set<br>
679 <b>Recommended Value (Development Build): </b>Not Set<br>
680 <b>Recommended Value (Release Build): </b>Not Set<br>
681 <b>Required: </b>No<br>
682 <b>Considerations: </b>If PEGASUS_ENABLE_EMAIL_HANDLER is
683 not set when OpenPegasus is built, a request to create an Email
684 Indication Handler instance will be rejected will the error
685 CIM_ERR_NOT_SUPPORTED.
686 </ul>
687
688 <h5>PEGASUS_ENABLE_GCOV</h5>
689 <ul>
690 <b>Description: </b>GCOV,
691 <a href="http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov">
692 http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov</a>, is a
693 code coverage utility. If PEGASUS_ENABLE_GCOV is set,
694 GCC will instrument the code to support analysis by GCOV.<br>
695 <b>Default Value: </b>Not Set<br>
696 <b>Recommended Value (Development Build): </b>
697 Not Set<br>
698 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
699 <b>Required: </b>No<br><b>Considerations: </b>
700 This flag is currently only supported with GCC on Linux.
701 <ul>
|
702 kumpf 1.12 Note: LCOV, <a href=
|
703 denise.eckstein 1.1 "http://ltp.sourceforge.net/coverage/lcov.php">
|
704 kumpf 1.12 http://ltp.sourceforge.net/coverage/lcov.php</a>, is a
|
705 denise.eckstein 1.1 graphical front-end extension for GCOV. It collects GCOV data
706 for multiple source files and creates HTML pages with coverage
|
707 kumpf 1.12 information. You can use the following steps to use LCOV to
|
708 denise.eckstein 1.1 analyze OpenPegasus GCOV data.
709 <ol>
710 <li>Set PEGASUS_ENABLE_GCOV = true.</li>
|
711 kumpf 1.12 <li>Build and test OpenPegasus (e.g.,
712 <i>make -f pegasus/TestMakefile build
|
713 denise.eckstein 1.1 alltests</i>).</li>
714 <li>For each source directory,
715 <ul>
716 <li>copy the .gcda and .gcno files from the object
|
717 kumpf 1.12 directory to the source directory (e.g.,
718 <i>cp build/obj/Pegasus/Common/*.gcda
|
719 denise.eckstein 1.1 src/Pegasus/Common/</i>);</li>
|
720 kumpf 1.12 <li>execute the <b>lcov</b> command
721 (e.g.,
|
722 denise.eckstein 1.1 <i>lcov --directory src/Pegasus/Common/ --capture
723 --output-file result.info</i>) to build the result.info
724 file; and finally,</li>
725 <li>use the <b>genhtml</b> command to generate the .html
726 output (e.g., <i>genhtml result.info</i>). The
727 top .html file is named index.html.</li>
728 </ul>
729 </ol>
730 </ul>
731 </ul>
|
732 kumpf 1.12
|
733 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INDICATION_COUNT</h5>
734 <ul>
|
735 kumpf 1.12 <b>Description: </b>If true, the CIM
|
736 denise.eckstein 1.1 Server will be built to count the number of CIM indications
737 generated by providers and matched with subscriptions. If false
738 or not set, indication statistic support will not be included.
739 <b>Default Value: </b>true<br>
740 <b>Recommended Value (Development Build): </b>true <br>
741 <b>Recommended Value (Release Build): </b>true <br>
742 <b>Required: </b>No <br>
743 <b>Considerations: </b>The number of CIM indications generated by
744 providers and matched with subscriptions is stored in hash tables
745 which causes memory usage to increase by 4 bytes for each
746 active subscription and by about 400 bytes for each active
747 indication provider.<br>
748 </ul>
749
|
750 mike 1.10 <h5>PEGASUS_ENABLE_PROTOCOL_INTERNAL_BINARY</h5>
|
751 mike 1.8 <ul>
752 <b>Description: </b>If true, OpenPegasus uses a faster binary
753 protocol between the CIM server and provider manager. If false,
754 OpenPegasus uses the older XML-based protocol instead.
755 <br>
756 <b>Default Value: </b>true<br>
757 <b>Recommended Value (Development Build): </b>true<br>
758 <b>Recommended Value (Release Build): </b>true<br>
759 <b>Required: </b>No<br>
760 <b>Considerations: </b>This option improves performance by optimizing the
|
761 kumpf 1.12 serialization and deserialization of messages between the server and
|
762 mike 1.10 out-of-process providers.
763 <br>
764 </ul>
765
766 <h5>PEGASUS_ENABLE_PROTOCOL_BINARY</h5>
767 <ul>
768 <b>Description: </b>If true, OpenPegasus uses a faster binary
|
769 kumpf 1.12 protocol between local clients (including the provider agent) and the
770 CIM server. If false, OpenPegasus uses the conventional XML-based protocol
|
771 mike 1.10 instead. See PEP#340 for more details.
772 <br>
773 <b>Default Value: </b>false<br>
774 <b>Recommended Value (Development Build): </b>false<br>
775 <b>Recommended Value (Release Build): </b>false<br>
776 <b>Required: </b>No<br>
777 <b>Considerations: </b>This option improves performance by using a faster
778 binary protocol between local clients and the CIM server.
|
779 mike 1.8 <br>
780 </ul>
781
|
782 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INTEROP_PROVIDER</h5>
783 <ul>
784 <b>Description: </b>If true, the OpenPegasus Interop Provider
785 will be build. If false or not set, the OpenPegasus Interop
786 Provider will not be built.<br>
787 <b>Default Value: </b>Not Set<br>
788 <b>Recommended Value (Development Build): </b>Not Set<br>
789 <b>Recommended Value (Release Build): </b>false<br>
790 <b>Required: </b>No <br>
791 <b>Considerations: </b> A number of features controlled by
792 OpenPegasus build options are dependent on the Interop
|
793 kumpf 1.12 Provider. Please refer to PEGASUS_ENABLE_SLP,
794 PEGASUS_DISABLE_PERFINST, and
|
795 denise.eckstein 1.1 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT for additional
796 details.<br>
797 </ul>
798
799 <h5>PEGASUS_ENABLE_IPV6</h5>
800 <ul>
801 <b>Description: </b>This variable can be used to specify
802 whether IPv6 support should be included in OpenPegasus.<br>
803 <b>Default Value: </b>true<br>
804 <b>Recommended Value (Development Build): </b>true<br>
805 <b>Recommended Value (Release Build): </b>true<br>
806 <b>Required: </b>No<br>
807 <b>Considerations: </b>When this variable is set to
808 'false', support for IPv6 socket APIs and structures is disabled,
|
809 kumpf 1.12 and the CIM Server will not accept connections to or from IPv6
|
810 denise.eckstein 1.1 network interfaces. When this variable is set to 'true', the
|
811 kumpf 1.12 newer IPv6 socket APIs and structures will be included when
812 OpenPegasus is built, so they must be supported on the build
813 platform. However, if IPv6 is not supported on the platform on
|
814 denise.eckstein 1.1 which an IPv6-enabled version of OpenPegasus is run, then the IPv6
815 feature will be disabled at run-time and only IPv4 connections
816 will be supported.
817 </ul>
818
819 <h5>PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER</h5>
820 <ul>
821 <b>Description: </b>If true, a version of OpenPegasus that
822 supports JMPI providers and their dependent components is built.
823 If false or not set, support for JMPI Providers is not included
824 in OpenPegasus. All other values are invalid.<br>
825 <b>Default Value: </b>false<br>
826 <b>Recommended Value (Development Build): </b>false<br>
827 <b>Recommended Value (Release Build): </b>false<br>
828 <b>Required: </b>No</p>
829 </ul>
830
831 <h5>PEGASUS_ENABLE_OBJECT_NORMALIZATION</h5>
832 <ul>
|
833 kumpf 1.12 <b>Description: </b>If set, builds in support so that objects
834 returned from provider instance operations can be validated.
|
835 denise.eckstein 1.1 The enableNormalization must also be set to 'true' (default)<br>
836 <b>Default Value: </b>Not Set<br>
837 <b>Recommended Value (Development Build): </b>Not Set<br>
838 <b>Recommended Value (Release Build): </b>Not Set<br>
839 <b>Required: </b>No <br>
840 <b>Considerations: </b>If PEGASUS_ENABLE_OBJECT_NORMALIZATION is
841 set, two new configuration options are defined: enableNormalization
842 and excludeModulesFromNormalization.
843 </ul>
844
845 <h5>PEGASUS_ENABLE_PRIVILEGE_SEPARATION</h5>
846 <ul>
847 <b>Description: </b>If true, a version of OpenPegasus that
848 enables the Privilege Separation feature is built. This feature
849 allows the CIM Server to run in a non-privileged user context and
|
850 kumpf 1.12 use a small executor process to perform privileged operations. If
851 false or not set, the Privilege Separate feature will not be
|
852 denise.eckstein 1.1 included.<br>
853 <b>Default Value: </b>false<br>
|
854 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (HP-UX,
|
855 denise.eckstein 1.1 Linux)<br>
856 <b>Recommended Value (Release Build): </b>true (HP-UX,
857 Linux)<br>
858 <b>Required: </b>No<br>
859 <b>Considerations: </b> The Privilege Separation feature is
860 only supported on HP-UX and Linux platforms. The 'cimsrvr' user
861 must be defined on the system. If the umask setting in the
862 environment is not 0, PEGASUS_TMP must be set to a directory that
|
863 kumpf 1.12 is writable by the 'cimsrvr' user for the tests to run
|
864 denise.eckstein 1.1 successfully.
865 </ul>
866
867 <h5>PEGASUS_ENABLE_PROTOCOL_WSMAN</h5>
868 <ul>
869 <b>Description: </b>If true, a version of OpenPegasus is
870 built that accepts and processes WS-Management requests. This
|
871 kumpf 1.5 feature is initially limited to WS-Transfer and WS-Enumeration
872 operations. If false or not set, WS-Management support is not
873 built or included in any way.<br>
|
874 denise.eckstein 1.1 <b>Default Value: </b>false<br>
875 <b>Recommended Value (Development Build): </b>true<br>
876 <b>Recommended Value (Release Build): </b>false<br>
877 <b>Required: </b>No<br>
878 <b>Considerations: </b> The WS-Management standards are not
879 mature, and interoperability problems may arise. The WS-Management
|
880 kumpf 1.12 functionality may change in incompatible ways in subsequent
|
881 denise.eckstein 1.1 releases. Also note the known limitations specified in PEP 311.<br>
882 </ul>
883
884 <h5>PEGASUS_ENABLE_REMOTE_CMPI</h5>
885 <ul>
886 <b>Description: </b>If set, a version of OpenPegasus that
887 support Remote CMPI providers and their dependent components
888 is built.<br>
889 <b>Default Value: </b>Not Set<br>
890 <b>Recommended Value (Development Build): </b>Not Set<br>
891 <b>Recommended Value (Release Build): </b>Not Set<br>
892 <b>Required: </b>No</p>
893 </ul>
894
895 <h5>PEGASUS_ENABLE_SLP</h5>
896 <ul>
897 <b>Description: </b>This variable controls of the inclusion
898 of SLP functionality in the OpenPegasus build. When this
899 environment variable is set to 'true', SLP functionality will be
|
900 kumpf 1.12 included as part of the OpenPegasus build. If
|
901 denise.eckstein 1.1 this variable is set to 'false' or not set, the SLP functionality
902 will not be included. All other values are considered
903 invalid and will result in a build error
904 (e.g., "PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid,
905 must be true or false").<br>
906 <b>Default Value: </b>'true' for Windows; 'false' for all other
907 Platforms<br>
908 <b>Recommended Value (Development Build): </b>'true' for
909 Windows; 'false' for all other Platforms<br>
910 <b>Recommended Value (Release Build): </b><br>
911 <b>Required: </b>No<br>
912 <b>Considerations: </b>PEGASUS_ENABLE_SLP requires
913 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
|
914 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
|
915 denise.eckstein 1.1 PEGASUS_ENABLE_SLP to true, will also enable
|
916 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER. If
|
917 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled
918 (i.e., set to false), a build error will be generated.<br>
919 </ul>
920
921
922 <h5>PEGASUS_ENABLE_SORTED_DIFF</h5>
923 <ul>
|
924 kumpf 1.12 <b>Description: </b>This controls if the DIFFSORT function
925 is used rather than a simple DIFF of the test results files
926 to the static results file. Set to 'true' enables the sorted
927 diffs of results to static results files. Otherwise results
928 in regular diffs of results to static results files.
929 See OpenPegasus bug 2283 for background information concerning
|
930 denise.eckstein 1.1 this config variable. <br>
931 <b>Default Value: </b>true<br>
932 <b>Recommended Value (Development Build): </b>true<br>
933 <b>Recommended Value (Release Build): </b>true<br>
934 <b>Required: </b>No<p> </p>
935 </ul>
936
937 <h5>PEGASUS_ENABLE_SYSTEM_LOG_HANDER</h5>
938 <ul>
939 <b>Description: </b>When this environment variable is set, a
|
940 kumpf 1.12 SysLog Indication Handler is built as part of the OpenPegasus
941 build. The SysLog Indication Handler can be used to
|
942 denise.eckstein 1.1 delivered CIM Indications to the system log file.<br>
943 <b>Default Value: </b>Not Set<br>
944 <b>Recommended Value (Development Build): </b>Not Set<br>
945 <b>Recommended Value (Release Build): </b>Not Set<br>
946 <b>Required: </b>No<br>
|
947 kumpf 1.12 <b>Considerations: </b>If PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
|
948 denise.eckstein 1.1 is not set when OpenPegasus is built, a request to create a SysLog
|
949 kumpf 1.12 Indication Handler instance will be rejected with the error
|
950 denise.eckstein 1.1 CIM_ERR_NOT_SUPPORTED.<br>
951 </ul>
952
953 <h5>PEGASUS_ENABLE_SSLV2</h5>
954 <ul>
955 <b>Description: </b>By default, support for the SSLV2 protocol
|
956 kumpf 1.12 is disabled in OpenPegasus. The option can be used to build a
|
957 denise.eckstein 1.1 version of OpenPegasus that supports SSLV2. This variable affects
958 how SSL contexts are constructed for both the CIM Server and CIM
959 Clients.<br>
960 <b>Default Value: </b>Not Set<br>
961 <b>Recommended Value (Development Build): </b>Not Set<br>
962 <b>Recommended Value (Release Build): </b>Not Set<br>
963 <b>Required: </b>No<br>
964 <b>Considerations:</b> Unless SSLV2 is required for backward
965 compatibility, enabling this protocol is not recommended (SSLV3
966 or later is preferred).
967 </ul>
968
969 <h5>PEGASUS_ENABLE_USERGROUP_AUTHORIZATION</h5>
970 <ul>
|
971 kumpf 1.12 <b>Description: </b>Builds a version of OpenPegasus that
|
972 denise.eckstein 1.1 allows an administrator to restrict access to CIM operations
973 to members of a designated set of groups. Refer to the
974 <b>authorizedUserGroups</b>configuration option for additional
975 details.<br>
976 <b>Default Value: </b>Not Set<br>
977 <b>Recommended Value (Development Build): </b>Not Set<br>
978 <b>Recommended Value (Release Build): </b>Set<br>
979 <b>Required: </b>No<br>
980 </ul>
981
982 <h5>PEGASUS_EXTRA_C_FLAGS</h5>
983 <ul>
|
984 kumpf 1.12 <b>Description: </b>This environment variable allows a
985 developer to specify an additional set of flags to be included
|
986 denise.eckstein 1.1 on the C compile command line.<br>
987 <b>Default Value: </b>Not Set<br>
988 <b>Recommended Value (Development Build): </b>No Set<br>
989 <b>Recommended Value (Release Build): </b>Not Set<br>
990 <b>Required: </b>No
991 </ul>
992
993 <h5>PEGASUS_EXTRA_CXX_FLAGS</h5>
994 <ul>
|
995 kumpf 1.12 <b>Description: </b>This environment variable allows a
|
996 denise.eckstein 1.1 developer to specify an additional set of flags to be included
997 on the C++ compile command line.<br>
998 <b>Default Value: </b>Not Set<br>
999 <b>Recommended Value (Development Build): </b>Not Set<br>
1000 <b>Recommended Value (Release Build): </b>Not Set<br>
1001 <b>Required: </b>No
1002 </ul>
1003
1004 <h5>PEGASUS_EXTRA_LIBRARY_LINK_FLAGS</h5>
1005 <ul>
1006 <b>Description: </b>This environment variable allows a
|
1007 kumpf 1.12 developer to specify an additional set of flags to include on
|
1008 denise.eckstein 1.1 the link command line used to build a library.<br>
1009 <b>Default Value: </b>Not Set<br>
1010 <b>Recommended Value (Development Build): </b>Not Set<br>
1011 <b>Recommended Value (Release Build): </b>Not Set<br>
1012 <b>Required: </b>No
1013 </ul>
1014
1015 <h5>PEGASUS_EXTRA_LINK_FLAGS</h5>
1016 <ul>
1017 <b>Description: </b>This environment variable allows a
1018 developer to specify an additional set of flags to be included
1019 on the link command line. These flags will be included on
1020 both library and program executable link command lines.<br>
1021 <b>Default Value: </b>Not Set<br>
1022 <b>Recommended Value (Development Build): </b>Not Set<br>
1023 <b>Recommended Value (Release Build): </b>Not Set<br>
1024 <b>Required: </b>No
|
1025 kumpf 1.12 <b>Considerations: </b>Refer to PEGASUS_EXTRA_LIBRARY_LINK_FLAGS and
|
1026 denise.eckstein 1.1 PEGASUS_EXTRA_PROGRAM_FLAGS to add flags specific to either a
1027 library or program link command line.<br>
1028 </ul>
1029
1030 <h5>PEGASUS_EXTRA_PROGRAM_LINK_FLAGS</h5>
1031 <ul>
1032 <b>Description: </b>This environment variable allows a
1033 developer to specify an additional set of flags to include on
1034 the link command line used to build an executable program.<br>
1035 <b>Recommended Value (Development Build): </b>Not Set<br>
1036 <b>Recommended Value (Release Build): </b>Not Set<br>
1037 <b>Required: </b>No
1038 </ul>
1039
1040 <h5>PEGASUS_HAS_MESSAGES</h5>
1041 <ul>
|
1042 kumpf 1.12 <b>Description: </b>When set (to anything) during the build,
1043 OpenPegasus compiles with localization support. The
1044 ICU (International Components for Unicode) variables,
1045 ICU_ROOT and ICU_INSTALL, indicate that the
1046 localization support is based on ICU. Only ICU is supported
|
1047 denise.eckstein 1.1 at this time.<br>
1048 <b>Default Value: </b>Not Set<br>
1049 <b>Recommended Value (Development Build): </b>Not Set<br>
1050 <b>Recommended Value (Release Build): </b>Not Set<br>
1051 <b>Required: </b>No<br>
1052 <b>Considerations: </b>If the PEGASUS_HAS_MESSAGES is not
1053 set, OpenPegasus is built without localization support. This
1054 means that all messages sent by the CIM Server and the CLIs are in
1055 English. ICU is an open source project at
1056 <a href="http://oss.software.ibm.com/icu">
|
1057 kumpf 1.12 http://oss.software.ibm.com/icu</a>.
|
1058 denise.eckstein 1.1 Only English translations are included with the OpenPegasus
1059 distribution. The OpenPegasus distribution does not provide
1060 translated messages. But, enabling for ICU would allow vendor to
1061 provide the translations. Refer to the OpenPegasus Release README
1062 for additional information regarding the use of ICU. Although, in
|
1063 kumpf 1.12 OpenPegasus 2.3.2, experience with localization support
1064 has been limited to a select set of platforms, wider platform
|
1065 denise.eckstein 1.1 adoption of this technology is planned for 2.5.<br>
1066 </ul>
1067
1068 <h5>PEGASUS_HAS_SSL</h5>
1069 <ul>
1070 <b>Description: </b>If set, a version of OpenPegasus that
1071 supports SSL (i.e., https) is built.<br>
1072 <b>Default Value: </b>Not Set<br>
1073 <b>Recommended Value (Development Build): </b>Set<br>
1074 <b>Recommended Value (Release Build): </b>Set<br>
1075 <b>Required: </b>No<br>
|
1076 kumpf 1.12 <b>Considerations: </b>Support for SSL in OpenPegasus is
1077 dependent on the OpenSSL software developed by the
|
1078 denise.eckstein 1.1 <a href="http://www.openssl.org/">
|
1079 kumpf 1.12 OpenSSL Project (http://www.openssl.org/)</a>.
|
1080 denise.eckstein 1.1
1081 If the PEGASUS_HAS_SSL variable is set, the variable OPENSSL_HOME
1082 must also be defined. The OPENSSL_HOME variable is used, by the
|
1083 kumpf 1.12 OpenPegasus build, to determine the location of the OpenSSL
|
1084 denise.eckstein 1.1 include files, libraries and binaries.
1085 </ul>
1086
1087 <h5>PEGASUS_HOME</h5>
1088 <ul>
1089 <b>Description: </b>Specifies the location of the
1090 OpenPegasus working directory. The OpenPegasus
|
1091 kumpf 1.12 build will use this directory as the default location
|
1092 denise.eckstein 1.1 for files generated during the build (e.g., binaries,
1093 libraries, objects).<br>
1094 <b>Default Value: </b>None<br>
1095 <b>Recommended Value (Development Build): </b>
1096 No Specific Recommendation<br>
1097 <b>Recommended Value (Release Build): </b>
1098 No Specific Recommendation<br>
1099 <b>Required: </b>Yes<br>
1100 <b>Considerations: </b>The error "PEGASUS_HOME
1101 environment variable undefined" is returned if the
|
1102 kumpf 1.12 PEGASUS_HOME environment variable is not set.
|
1103 denise.eckstein 1.1 This variable is also used during runtime. Refer to the section
1104 titled "Environment Variable Settings for Running OpenPegasus
1105 2.3.2 on Linux" for additional details.<br>
1106 </ul>
1107
1108 <h5>PEGASUS_INDICATIONS_Q_THRESHOLD</h5>
1109 <ul>
1110 <b>Description: </b>Controls if indications providers are stalled
1111 if the indications service queue is too large. It can be set
|
1112 kumpf 1.12 to any positive value. If not set providers are never
1113 stalled. This implies that the indications service
|
1114 denise.eckstein 1.1 queue may become as large as necessary to hold all the
|
1115 kumpf 1.12 indications generated. If set to any value then
|
1116 denise.eckstein 1.1 providers are stalled by forcing them to sleep when they
1117 try to deliver an indication and the indications service
1118 queue exceeds this value. They are resumed when the queue
1119 count falls 10 percent below this value. Stall and resume log
1120 entries are made to inform the administrator the condition has
1121 occurred.<br>
1122 <b>Default Value: </b>Not Set<br>
1123 <b>Recommended Value (Development Build): </b>Not Set<br>
1124 <b>Recommended Value (Release Build): </b>Not Set<br>
1125 <b>Required: </b>No<br>
1126 <b>Considerations: </b>Use of this setting may have
1127 unintended side-effects when using Out-of-Process Providers
1128 including delayed processing of CIM Operation Requests.
1129 </ul>
1130
1131 <h5>PEGASUS_MAX_THREADS_PER_SVC_QUEUE</h5>
1132 <ul>
1133 <b>Description: </b>Controls the maximum number of threads
1134 allowed per message service queue. It is allowed to range
1135 between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT (currently 5000)
|
1136 kumpf 1.12 as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
|
1137 denise.eckstein 1.1 If set to 0 (zero) the max threads per service queue is then
1138 set to MAX_THREADS_PER_SVC_QUEUE_LIMIT. If set larger than the
|
1139 kumpf 1.12 MAX_THREADS_PER_SVC_QUEUE_LIMIT it is set equal to
|
1140 denise.eckstein 1.1 MAX_THREADS_PER_SVC_QUEUE_LIMIT. There are no other limits on the
1141 total number of threads that can exist within the system at this
|
1142 kumpf 1.12 time. When the server starts there on the order of 10 to 20
1143 message service queues created dependent upon
|
1144 denise.eckstein 1.1 build options. <br>
1145 <b>Default Value: </b>5<br>
1146 <b>Recommended Value (Development Build): </b>5<br>
1147 <b>Recommended Value (Release Build): </b>5<br>
1148 <b>Required: </b>No<br>
1149 <b>Considerations: </b>This flag affects consumption of
1150 system resources. Not setting, or inappropriately setting
1151 this value, may cause the cimserver to hang or crash.<br>
1152 </ul>
1153
1154 <h5>PEGASUS_ROOT</h5>
1155 <ul>
1156 <b>Description: </b>Specifies the location of the directory
1157 that corresponds to "pegasus" source directory defined in the
|
1158 kumpf 1.12 OpenPegasus CVS source tree. This environment variable is
1159 used by the OpenPegasus build to locate the required build
1160 and source files (e.g., $(PEGASUS_ROOT)/mak and
1161 $(PEGASUS_ROOT)/src).<br>
|
1162 denise.eckstein 1.1 <b>Default Value: </b>None<br>
1163 <b>Recommended Value (Development Build): </b>
1164 No Specific Recommendation<br>
1165 <b>Recommended Value (Release Build): </b>
1166 No Specific Recommendation<br>
1167 <b>Required: </b>Yes<br>
1168 <b>Considerations: </b>The error "PEGASUS_ROOT environment
1169 variable undefined" is returned if the PEGASUS_ROOT
1170 environment variable is not set.
1171 </ul>
1172
1173
1174 <h5>PEGASUS_NET_SNMP_INCLUDE_DIR</h5>
1175 <ul>
1176 <b>Description: </b>Specifies the location of the NET-SNMP
1177 <i>include</i> directory. <br>
1178 <b>Default Value: </b>Not Set<br>
1179 <b>Recommended Value (Development Build): </b>
1180 No Specific Recommendation<br>
1181 <b>Recommended Value (Release Build): </b>
1182 No Specific Recommendation<br>
1183 denise.eckstein 1.1 <b>Required: </b>No. By default, the NET-SNMP include
1184 files are expected to be installed in directories that
1185 are searched by default (e.g., /usr/include). For platforms
|
1186 kumpf 1.12 where this isn't true, the PEGASUS_NET_SNMP_INCLUDE_DIR
|
1187 denise.eckstein 1.1 environment variable may be used to define an alternative path.
1188 This environment variable is only used if PEGASUS_USE_NET_SNMP
1189 is set.<br>
1190 </ul>
1191
1192 <h5>PEGASUS_NET_SNMP_LIB_DIR</h5>
1193 <ul>
1194 <b>Description: </b>Specifies the location of the NET-SNMP
1195 <i>lib </i>directory. <br>
1196 <b>Default Value: </b>Not Set<br>
1197 <b>Recommended Value (Development Build): </b>
1198 No Specific Recommendation<br>
1199 <b>Recommended Value (Release Build): </b>
1200 No Specific Recommendation<br>
1201 <b>Required: </b>No. By default, the NET-SNMP library is
|
1202 kumpf 1.12 expected to be installed in a directory that is searched by
1203 default (e.g., /usr/lib, /usr/lib64). For platforms where
|
1204 denise.eckstein 1.1 this isn't true, the PEGASUS_NET_SNMP_LIB_DIR environment
1205 variable may be used to define an alternative path. This
1206 environment variable is only used if PEGASUS_USE_NET_SNMP is set.
1207 </ul>
1208
1209
1210 <h5>PEGASUS_NOASSERTS</h5>
1211 <ul>
1212 <b>Description: </b>Defines the NDEBUG compilation macro, which
1213 causes the preprocessor to remove PEGASUS_ASSERT() statements.<br>
1214 <b>Default Value: </b>Not Set<br>
1215 <b>Recommended Value (Development Build): </b>Not Set<br>
1216 <b>Recommended Value (Release Build): </b>Set<br>
1217 <b>Required: </b>No<br>
1218 </ul>
1219
1220 <h5>PEGASUS_OPENSLP_HOME</h5>
1221 <ul>
|
1222 kumpf 1.12 <b>Description: </b>Specifies the location of the OpenSLP
|
1223 denise.eckstein 1.1 SDK directory. This directory must contain the OpenSLP
1224 <i>include</i> directory, $(PEGASUS_OPENSLP_HOME)/include,
1225 and the OpenSLP <i>library</i> directory,
1226 $(PEGASUS_OPENSLP_HOME)/lib.<br>
1227 <b>Default Value: </b>Not Set<br>
1228 <b>Recommended Value (Development Build): </b>
1229 No Specific Recommendation<br>
1230 <b>Recommended Value (Release Build): </b>
1231 No Specific Recommendation<br>
1232 <b>Required: </b>No. If not set, no additional include or
1233 library search paths will be included.
1234 <b>Considerations: </b>This value is not used if PEGASUS_USE_OPENSLP
1235 is not defined. <br>
1236 </ul>
1237
1238 <h5>PEGASUS_PAM_AUTHENTICATION</h5>
1239 <ul>
|
1240 kumpf 1.12 <b>Description: </b>Enables support for PAM-(Pluggable
|
1241 denise.eckstein 1.1 Authentication Modules) based authentication.<br>
1242 <b>Default Value: </b>Not Set<br>
1243 <b>Recommended Value (Development Build): </b>Set<br>
1244 <b>Recommended Value (Release Build): </b>Set<br>
1245 <b>Required: </b>No<br>
1246 <b>Considerations: </b>Support for PAM in OpenPegasus is
1247 dependent on platform support for PAM.<br>
1248 </ul>
1249
1250 <h5>PEGASUS_PLATFORM</h5>
1251 <ul>
1252 <b>Description: </b>Describes the target platform for the
|
1253 kumpf 1.12 build. The list of supported values for this variable
1254 is defined in pegasus/mak/config.mak. Please refer to
|
1255 denise.eckstein 1.1 that file for a complete list of valid PEGASUS_PLATFORM
1256 values. This document includes platform-specific configuration
|
1257 kumpf 1.12 data for only a subset of the supported platforms. The
|
1258 denise.eckstein 1.1 following table describes the platforms documented in
1259 this version of the document. <br>
1260 <b>Default Value: </b>None<p> </p>
1261 <table border="1" cellspacing="1" bordercolordark="#666666"
1262 bordercolorlight="#CCCCCC" width=542
1263 style='font-size=10.0pt;font-family:Arial'>
1264 <tr>
1265 <th bgcolor="#CAE6CA" width="190">Platform</th>
1266 <th bgcolor="#CAE6CA" width=351>Recommended Value <br>
1267 Development Build</th>
1268 <th bgcolor="#CAE6CA" width=338>Recommended Value <br>
1269 Release Build</th>
1270 </tr>
1271 <tr align="center">
1272 <td width="190" align="left">Linux IA32</td>
1273 <td width="351">LINUX_IX86_GNU</td>
1274 <td width="338">LINUX_IX86_GNU</td>
1275 </tr>
1276 <tr align="center">
1277 <td width="190" align="left">Linux IA64</td>
1278 <td width="351">LINUX_IA64_GNU</td>
1279 denise.eckstein 1.1 <td width="338">LINUX_IA64_GNU</td>
1280 </tr>
1281 <tr align="center">
1282 <td width="190" align="left">Linux X86_64</td>
1283 <td width="351">LINUX_X86_64_GNU</td>
1284 <td width="338">LINUX_X86_64_GNU</td>
1285 </tr>
1286 <tr align="center">
1287 <td width="190" align="left">HP-UX PA-RISC</td>
1288 <td width="351">HPUX_PARISC_ACC</td>
1289 <td width="338">HPUX_PARISC_ACC</td>
1290 </tr>
1291 <tr align="center">
1292 <td width="190" align="left">HP-UX IPF</td>
1293 <td width="351">HPUX_IA64_ACC</td>
1294 <td width="338">HPUX_IA64_ACC</td>
1295 </tr>
1296 <tr align="center">
1297 <td width="190" align="left">OpenVMS Alpha</td>
1298 <td width="351">VMS_ALPHA_DECCXX</td>
1299 <td width="338">VMS_ALPHA_DECCXX</td>
1300 denise.eckstein 1.1 </tr>
1301 <tr align="center">
1302 <td width="190" align="left">OpenVMS IA64</td>
1303 <td width="351">VMS_IA64_DECCXX</td>
1304 <td width="338"> VMS_IA64_DECCXX</td>
1305 </tr>
1306 </table>
1307 <br><br>
1308 <b>Required: </b>Yes<br>
|
1309 kumpf 1.12 <b>Considerations: </b>The error "PEGASUS_PLATFORM
1310 environment variable undefined." is returned if the
|
1311 denise.eckstein 1.1 PEGASUS_PLATFORM environment variable is not set.
1312 </ul>
1313
1314 <h5>PEGASUS_REMOVE_METHODTRACE</h5>
1315 <ul>
1316 <b>Description: </b>If true, the CIM Server is compiled without
1317 method enter and exit trace statements. Trace Level 5 will
1318 continue to be accepted as a valid trace level but, without the
1319 method enter and exit trace statements, it will be equivalent to
|
1320 kumpf 1.12 Trace Level 4. If PEGASUS_REMOVE_METHODTRACE is false or not set,
|
1321 denise.eckstein 1.1 method enter and exit trace statements are included. All
1322 other values are considered invalid and will result in a build
1323 error.<br>
1324 <b>Default Value: </b>Not Set<br>
1325 <b>Recommended Value (Development Build): </b>Not Set (The
1326 Considerations section gives guidance on when a different
1327 decision would be made.)<br>
1328 <b>Recommended Value (Release Build): </b>Not Set (The
1329 Considerations section gives guidance on when a different
1330 decision would be made.)<br>
1331 <b>Required: </b>No<br>
1332 <b>Considerations: </b>This option completely removes the
|
1333 kumpf 1.12 method enter/exit trace statements from the generated object code.
1334 It defines the PEG_METHOD_ENTER and PEG_METHOD_EXIT macros
|
1335 denise.eckstein 1.1 to null statements. This helps to keep static code size small
1336 but reduces the serviceability of the CIM server.<br>
1337 </ul>
1338
1339
1340 <h5>PEGASUS_REPOSITORY_MODE</h5>
1341 <ul>
1342 <b>Description: </b>This variable defines the default mode
1343 used to create repositories that are constructed as part of the
1344 automated build tests. It does not affect the runtime
1345 environment. Valid values include: XML (causes
1346 the repository to be built in XML mode); BIN (causes
|
1347 kumpf 1.12 the repository to be built in binary mode). Use cimconfig to
|
1348 denise.eckstein 1.1 modify the runtime environment.<br>
1349 <b>Default Value: </b>XML<br>
1350 <b>Recommended Value (Development Build): </b>XML<br>
1351 <b>Recommended Value (Release Build): </b>XML<br>
1352 <b>Required: </b>No<p> </p>
1353 </ul>
1354
|
1355 kumpf 1.2 <h5>PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES</h5>
1356 <ul>
1357 <b>Description: </b>This variable defines the default contents of a
1358 class definition in the repository store when a new repository is created.
1359 Specifically, when set to true, propagated elements are included in a
1360 class definition in the persistent store. The contents of a class
1361 definition returned from the repository interface is not affected by this
1362 option.<br>
1363 <b>Default Value: </b>false<br>
1364 <b>Recommended Value (Development Build): </b>false<br>
1365 <b>Recommended Value (Release Build): </b>false<br>
1366 <b>Required: </b>No<p> </p>
1367 <b>Considerations: </b>A repository which stores complete class
1368 definitions does not allow modifications to non-leaf classes or changes
1369 to a superclass designation. Complete classes use more storage space,
1370 often twice as much as local (incomplete) classes. Class retrieval may
1371 be more expensive when local classes are stored. No specific mechanism
1372 is available to change this setting in an existing repository.<br>
1373 </ul>
1374
|
1375 denise.eckstein 1.1 <h5>PEGASUS_SLP_REG_TIMEOUT</h5>
1376 <ul>
1377 <b>Description: </b>Most SLP implementations allow a lifetime
1378 value to be specified in the registration sent to the SLP SA or
1379 DA. The PEGASUS_SLP_REG_TIMEOUT build variable allows a lifetime
1380 (ie. timeout) value to be specified on the SLP registration, with
1381 a 're-registration' being sent to SLP at the same specified
1382 timeout interval. The purpose of this lifetime or timeout value
|
1383 kumpf 1.12 is to avoid the accumulation of stale service information
|
1384 denise.eckstein 1.1 in the SA or DA.<br>
1385 <b>Default Value: </b>Undefined<br>
1386 <b>Recommended Value (Development Build): </b>Undefined<br>
1387 <b>Recommended Value (Release Build): </b>Undefined<br>
1388 <b>Required: </b>No<p><b>Example: </b>
1389 PEGASUS_SLP_REG_TIME=1440 (ie. 24 hours or 1 day)<br>
1390 <b>Considerations: </b>(1) The OpenPegasus internal SLP
1391 implementation does not support timeout registrations. This
1392 build option is useful, for example, if PEGASUS_USE_OPENSLP is
|
1393 kumpf 1.12 defined. (2) Some SLP implementations may impose a
|
1394 denise.eckstein 1.1 maximum value for the lifetime parameter. For example, OpenSLP
|
1395 kumpf 1.12 limits this value to SLP_LIFETIME_MAXIMUM (or 0xFFFF), and
|
1396 denise.eckstein 1.1 if this maximum value is passed to OpenSLP, then the timeout
1397 feature is disabled. Refer to the documentation of your SLP
1398 implementation for more information. (3) OpenPegasus will not
|
1399 kumpf 1.12 do any validity checking on the specified value, either
|
1400 denise.eckstein 1.1 to determine if it is a valid positive integer or if it
1401 exceeds some maximum value.<br>
1402 </ul>
1403
1404 <h5>PEGASUS_SNIA_EXTENSIONS</h5>
1405 <ul>
1406 <b>Description: </b> This variable is used to enable a
1407 set of workarounds that support the use of OpenPegasus
1408 in the SNIA Test Environment.<br>
1409 <b>Default Value: </b>Not Set<br>
1410 <b>Recommended Value (Development Build): </b>Not Set<br>
1411 <b>Recommended Value (Release Build): </b>Not Set<br>
1412 <b>Required: </b>No<br>
1413 <b>Considerations: </b>The functionality enabled with this
1414 variable is experimental and subject to change.
1415 </ul>
1416
1417 <h5>PEGASUS_SKIP_MOST_TEST_DIRS</h5>
1418 <ul>
1419 <b>Description: </b>If set to true, this variable can be used
1420 to reduce the time required to build OpenPegasus by significantly
1421 denise.eckstein 1.1 reducing the number of tests that are built.<br>
1422 <b>Default Value: </b>Not Set<br>
1423 <b>Recommended Value (Development Build): </b>Not Set<br>
1424 <b>Recommended Value (Release Build): </b>Not Set<br>
1425 <b>Required: </b>No<br>
1426 <b>Considerations: </b>Setting this variable to true
1427 affects the behavior of all recursive make targets (e.g.,
1428 clean, depend, all, unittests, alltests, and slptests).
1429 Use of this variable with test-related targets (e.g., unittests,
|
1430 kumpf 1.12 alltests and slptests) can produce unexpected results.
|
1431 denise.eckstein 1.1 To avoid creating an inconsistent PEGASUS_HOME directory,
1432 the PEGASUS_HOME directory (i.e., the OpenPegasus build
1433 directory) should be removed prior to enabling or disabling
1434 this variable. This variable should not be used to characterize
|
1435 kumpf 1.12 the set of files to be packaged in a release build. Please
|
1436 denise.eckstein 1.1 refer to the Runtime Packaging Definition PEP for the release
|
1437 kumpf 1.12 for a recommended list of files to be included in a release.
|
1438 denise.eckstein 1.1 </ul>
1439
1440 <h5>PEGASUS_TEST_ENABLE_DEBUG_TRACE</h5>
1441 <ul>
1442 <b>Description: </b>
1443 This variable is only used for testing. If set to true,
|
1444 kumpf 1.12 Discarded data trace will be enabled by the install_run
1445 target of the src/Server/Makefile before running the
|
1446 denise.eckstein 1.1 OpenPegasus TestMakefile test suite. <br>
1447 <b>Default Value: </b>Not Set<br>
1448 <b>Recommended Value (Development Build): </b>Set<br>
1449 <b>Recommended Value (Release Build): </b>Not Set<br>
1450 <b>Required: </b>No<br>
1451 <b>Considerations: </b>
|
1452 kumpf 1.12 This variable is useful in certain test environments to
1453 explicitly enable tracing to aid in better troubleshooting and
|
1454 denise.eckstein 1.1 detection of test failures (E.g. Test systems are experiencing
|
1455 kumpf 1.12 test failures due to connection timeouts, lost indications
|
1456 denise.eckstein 1.1 etc).<br>
1457 </ul>
1458
1459 <h5>PEGASUS_TEST_ISGROUP_GROUP/PEGASUS_TEST_ISGROUP_USER_SUCCESS/PEGASUS_TEST_ISGROUP_USER_FAILURE</h5>
1460 <ul>
|
1461 kumpf 1.12 <b>Description: </b>These variables are only used for testing.
|
1462 denise.eckstein 1.1 These variables allow the developer to define a valid group name,
1463 PEGASUS_TEST_ISGROUP_GROUP, a valid user name that is in the
1464 group, PEGASUS_TEST_ISGROUP_USER_SUCCESS, and an a valid user
1465 name that is not in the group, PEGASUS_TEST_ISGROUP_USER_FAILURE.
|
1466 kumpf 1.12 These variables are only used for testing and NOT part of the
|
1467 denise.eckstein 1.1 release.<br>
|
1468 kumpf 1.12 <b>Default Value(Windows):</b>
|
1469 denise.eckstein 1.1 Administrator/Administrators/Guest<br>
1470 <b>Default Value(Non-Windows): </b>root/root/guest<br>
1471 <b>Recommended Value (Development Build): </b>
1472 No Recommendation<br>
1473 <b>Recommended Value (Release Build): </b>Not Used<br>
1474 <b>Required: </b>No
1475 </ul>
1476
1477 <h5>PEGASUS_TEST_IPV6</h5>
1478 <ul>
1479 <b>Description: </b>This variable is only used for
1480 testing. If set to true, the IPv6-specific tests will
|
1481 kumpf 1.12 be run as part of the "alltests" OpenPegasus
|
1482 denise.eckstein 1.1 TestMakefile test suite. If this variable is not set or set to
1483 false, the IPv6-specific tests will not be run. All
1484 other values are invalid.<br>
|
1485 kumpf 1.12 <b>Default Value: </b>If PEGASUS_TEST_IPV6 is not defined,
|
1486 denise.eckstein 1.1 PEGASUS_TEST_IPV6 is set to the value of PEGASUS_ENABLE_IPV6.<br>
1487 <b>Recommended Value (Development Build): </b>Set to the value
1488 of PEGASUS_ENABLE_IPV6<br>
1489 <b>Recommended Value (Release Build): </b>Not Used<br>
1490 <b>Required: </b>No<br>
|
1491 kumpf 1.12 <b>Considerations: </b>This variable is useful in certain
|
1492 denise.eckstein 1.1 test environments to explicitly disable running the IPv6
|
1493 kumpf 1.12 tests (e.g., when running an IPv6-enabled version of
|
1494 denise.eckstein 1.1 OpenPegasus on an an IPv4 system).<br>
1495 </ul>
1496
1497 <h5>PEGASUS_TEST_SDK</h5>
1498 <ul>
|
1499 kumpf 1.12 <b>Description: </b>This variable is only used for
|
1500 denise.eckstein 1.1 testing. It is used to control testing of the SDK
1501 sample providers and clients. If set, the setup, building and
|
1502 kumpf 1.12 testing of the SDK samples is enabled as part of the
|
1503 denise.eckstein 1.1 OpenPegasus automated build and test.<br>
1504 <b>Default Value: </b>Not Set<br>
1505 <b>Recommended Value (Development Build): </b>Set<br>
1506 <b>Recommended Value (Release Build): </b>Not Used<br>
1507 <b>Required: </b>No
1508 </ul>
1509
1510 <h5>PEGASUS_TEST_USER_DEFINED</h5>
1511 <ul>
1512 <b>Description: </b>This variable is only used for testing.
1513 If this variable is set, the tests will assume that the
1514 PEGASUS_TEST_USER_ID and PEGASUS_TEST_USER_PASS variables
|
1515 kumpf 1.12 defines a valid user/password pair and can be used for
|
1516 denise.eckstein 1.1 certificate-based authentication testing. These tests
|
1517 kumpf 1.12 also assumes that "invalidUser" is not a valid
|
1518 denise.eckstein 1.1 user.<br>
1519 <b>Default Value: </b>Not Set<br>
1520 <b>Recommended Value (Development Build): </b>Set<br>
1521 <b>Recommended Value (Release Build): </b>Not Used<br>
1522 <b>Required: </b>No
1523 </ul>
1524
1525 <h5>PEGASUS_TEST_USER_ID/PEGASUS_TEST_USER_PASS</h5>
1526 <ul>
1527 <b>Description: </b>These variables are only used for
1528 testing. These variables allow the developer to define a
1529 valid, non-privileged user name and password
1530 on the test system that can be used as part of the OpenPegasus
1531 automated test scripts to perform authentication and
1532 authorization testing. These variables are only used for
1533 testing and NOT part of the release.<br>
1534 <b>Default Value: </b>guest/guest<br>
1535 <b>Recommended Value (Development Build): </b>
1536 No Recommendation<br>
1537 <b>Recommended Value (Release Build): </b>Not Used<br>
1538 <b>Required: </b>No<br>
1539 denise.eckstein 1.1 </ul>
1540
1541 <h5>PEGASUS_TEST_VALGRIND_LOG_DIR</h5>
1542 <ul>
1543 <b>Description: </b>
1544 This variable is currently only supported on Linux. It may be
|
1545 kumpf 1.12 set to run regression tests under the
|
1546 denise.eckstein 1.1 <a href="http://www.valgrind.org/">Valgrind</a> memory
1547 checking tool. It must specify a directory for writing
1548 Valgrind log files. The file name format for a particular
1549 log is PEGASUS_TEST_VALGRIND_LOG_DIR/PROGRAM_NAME.pid.<br>
1550 <b>Default Value: </b>Not Set<br>
1551 <b>Recommended Value (Development Build): </b>Not Set<br>
1552 <b>Recommended Value (Release Build): </b>Not Set<br>
1553 <b>Required: </b>No<br>
1554 <b>Considerations: </b>This flag is only supported on Linux to
1555 enable running tests under Valgrind.<br>
1556 </ul>
1557
1558 <h5>PEGASUS_TMP</h5>
1559 <ul>
1560 <b>Description: </b>This variable is only used in a test
1561 environment. It can be used to define the directory that
1562 OpenPegasus test programs should use to store temporary files.<br>
1563 <b>Default Value: </b>"."<br>
1564 <b>Recommended Value (Development Build): </b>
1565 No Specific Recommendation<br>
1566 <b>Recommended Value (Release Build): </b>Not Used<br>
1567 denise.eckstein 1.1 <b>Required: </b>No<br>
1568 </ul>
1569
1570 <h5>PEGASUS_USE_DEBUG_BUILD_OPTIONS</h5>
1571 <ul>
1572 <b>Description: </b>The PEGASUS_DEBUG flag is used to control
1573 a variety of settings, including compile options, assertion
|
1574 kumpf 1.12 enablement, method definitions for testing, and diagnostic
|
1575 denise.eckstein 1.1 output. The PEGASUS_USE_DEBUG_BUILD_OPTIONS variable
|
1576 kumpf 1.12 can be used to enable just the compiler specific debug options
|
1577 denise.eckstein 1.1 (e.g., -g in g++) .<br>
1578 <b>Default Value: </b>Not Set<br>
1579 <b>Recommended Value (Development Build): </b>Set<br>
1580 <b>Recommended Value (Release Build): </b>Not Set<br>
1581 <b>Required: </b>No<br>
1582 <b>Considerations: </b>This variable is automatically set
1583 if PEGASUS_DEBUG is set.<br>
1584 </ul>
1585
1586 <h5>PEGASUS_USE_EMANATE</h5>
1587 <ul>
1588 <b>Description: </b>EMANATE,
1589 <a href="http://www.snmp.com/products/emanate.html">
|
1590 kumpf 1.12 http://www.snmp.com/products/emanate.html</a>, is an SNMP Research
1591 International product that supports SNMPv1, SNMPv2c, and
|
1592 denise.eckstein 1.1 SNMPv3. If the PEGASUS_USE_EMANATE variable is defined,
1593 the OpenPegasus SNMP Handler will use the EMANATE libraries
|
1594 kumpf 1.12 to send traps to the SNMP Management application.
|
1595 denise.eckstein 1.1 The EMANATE libraries are NOT included as part of OpenPegasus.<br>
1596 <b>Default Value: </b>Not Set<br>
1597 <b>Recommended Value (Development Build): </b>Not Set<br>
1598 <b>Recommended Value (Release Build): </b>Not Set<br>
1599 <b>Required: </b>No<p>
1600 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
|
1601 kumpf 1.12 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1602 denise.eckstein 1.1 Handler to be supported.<br>
1603 </ul>
1604
1605
1606 <h5>PEGASUS_USE_NET_SNMP</h5>
1607 <ul>
|
1608 kumpf 1.12 <b>Description: </b>NET-SNMP,
|
1609 denise.eckstein 1.1 <a href="http://net-snmp.sourceforge.net">
1610 http://net-snmp.sourceforge.net</a>, is an OSS
1611 implementation of a suite of applications used to implement
1612 <a href="http://www.ietf.org/rfc/rfc1157.txt">SNMP v1</a>,
1613 <a href="http://www.ietf.org/rfc/rfc1901.txt">SNMP v2c</a> and
1614 <a href="http://www.ietf.org/rfc/rfc2571.txt">SNMP v3</a> using
|
1615 kumpf 1.12 both IPv4 and IPv6. If the PEGASUS_USE_NET_SNMP
|
1616 denise.eckstein 1.1 variable is defined, the OpenPegasus SNMP Handler will use
1617 the NET-SNMP libraries to send traps to the SNMP Management
1618 application. The NET-SNMP libraries are NOT included
1619 as part of OpenPegasus.<br>
1620 <b>Default Value: </b>Not Set<br>
1621 <b>Recommended Value (Development Build): </b>Not Set<br>
|
1622 kumpf 1.12 <b>Recommended Value (Release Build): </b>true for Linux,
|
1623 denise.eckstein 1.1 false for all other platforms<br>
1624 <b>Required: </b>No<p>
|
1625 kumpf 1.12 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1626 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1627 denise.eckstein 1.1 Handler to be supported.<br>
1628 </ul>
1629
1630 <h5>PEGASUS_USE_OPENSLP</h5>
1631 <ul>
1632 <b>Description: </b>OpenSLP, <a href="http://www.openslp.org">
|
1633 kumpf 1.12 http://openslp.org</a>, is an open-source implementation of
|
1634 denise.eckstein 1.1 Service Location Protocol. If the PEGASUS_USE_OPENSLP variable
1635 is defined, OpenPegasus will be built to use the OpenSLP
1636 implementation of SLP instead of the internal OpenPegasus
1637 implementation of SLP. The OpenSLP libaries are NOT included
1638 as part of OpenPegasus.
1639 <b>Default Value: </b>Not Set<br>
1640 <b>Recommended Value (Development Build): </b>Not Set<br>
1641 <b>Recommended Value (Release Build): </b>Not Set<br>
1642 <b>Required: </b>No<br>
1643 <b>Considerations: </b>PEGASUS_ENABLE_SLP must be defined
1644 if this variable is set.
1645 </ul>
1646
1647 <h5>PEGASUS_USE_PAM_STANDALONE_PROC</h5>
1648 <ul>
1649 <b>Description: </b>Moves the processing of PAM requests from
1650 the CIM Server process to a separate process managed by the
1651 CIM Server.<br>
1652 <b>Default Value: </b>Not Set<br>
1653 <b>Recommended Value (Development Build): </b>Set<br>
1654 <b>Recommended Value (Release Build): </b>Set<br>
1655 denise.eckstein 1.1 <b>Required: </b>No<br>
1656 <b>Considerations: </b>If PAM Authentication is enabled,
1657 the PAM API is used, during the processing of each request, to
1658 authenticate the client. This level of use makes the CIM Server
1659 extremely sensitive to memory leaks in the PAM library. In
1660 addition, certain PAM modules are not thread-safe. If your
|
1661 kumpf 1.12 platform is experiencing problems with PAM Authentication,
|
1662 denise.eckstein 1.1 use of option may provide a work-around.
1663 PEGASUS_USE_PAM_STANDALONE_PROC requires
1664 PEGASUS_PAM_AUTHENTICATION to be set.<br>
1665 </ul>
1666
1667 <h5>PEGASUS_USE_RELEASE_CONFIG_OPTIONS</h5>
1668 <ul>
1669 <b>Description: </b>If set, OpenPegasus is built using
1670 the "Release Build" configuration options. By default,
|
1671 kumpf 1.12 OpenPegasus is built using the "Development Build"
|
1672 denise.eckstein 1.1 configuration options.<br>
|
1673 s.kodali 1.13.2.2 <b>Default Value: </b>false<br>
1674 <b>Recommended Value (Development Build): </b>false<br>
1675 <b>Recommended Value (Release Build): </b>true<br>
|
1676 denise.eckstein 1.1 <b>Required: </b>No<br>
|
1677 kumpf 1.12 <b>Considerations: </b>(1)The
1678 PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a platform
|
1679 denise.eckstein 1.1 vendor to easily toggle between two sets of configurations
1680 options, a set of options tuned for the development/debug
1681 ("Development Build") environment and a set of options
1682 tuned for the production environment ("Release Build").
|
1683 kumpf 1.12 Refer the section titled "Configuration Properties" for
1684 additional detail. (2) For each configuration
|
1685 denise.eckstein 1.1 variable, the "Recommended Value (Release Build)"
|
1686 kumpf 1.12 value defines the recommended settings to use for a
1687 "Release Build". Please refer to the
|
1688 denise.eckstein 1.1 description of each variable for additional information.
1689 </ul>
1690
1691 <h5>PEGASUS_USE_RELEASE_DIRS</h5>
1692 <ul>
|
1693 kumpf 1.12 <b>Description: </b>If set, OpenPegasus is built using
1694 the "Release Build" directory definitions. By default,
1695 OpenPegasus is built using the "Development Build"
|
1696 denise.eckstein 1.1 directory definitions.<br>
1697 <b>Default Value: </b>Not Set<br>
1698 <b>Recommended Value (Development Build): </b>Not Set<br>
1699 <b>Recommended Value (Release Build): </b>Set<br>
1700 <b>Required: </b>No<br>
|
1701 kumpf 1.12 <b>Considerations: </b>
|
1702 denise.eckstein 1.1 The PEGASUS_USE_RELEASE_DIRS variable allows a platform
|
1703 kumpf 1.12 vendor to easily toggle between two sets of directory
1704 definitions, a set tuned for the development/debug
1705 ("Development Build") environment and a set tuned for the
1706 production environment ("Release Build"). Refer the section
|
1707 denise.eckstein 1.1 titled "Configuration Properties" for additional detail.<br>
1708 </ul>
1709
|
1710 kumpf 1.6 <h5>PEGASUS_USE_SQLITE_REPOSITORY</h5>
1711 <ul>
1712 <b>Description: </b>If true, new repository stores are created
1713 using a SQLite database. Existing file-based stores will continue
1714 to be recognized and operate seamlessly.<br>
1715 <b>Default Value: </b>false<br>
1716 <b>Recommended Value (Development Build): </b>true<br>
1717 <b>Recommended Value (Release Build): </b>true<br>
1718 <b>Required: </b>No<br>
1719 <b>Considerations: </b>If PEGASUS_USE_SQLITE_REPOSITORY is set to true
1720 and SQLite files are not installed in default search locations,
1721 SQLITE_HOME must also be configured.
1722 PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES may not be set to true when
1723 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1724 </ul>
1725
|
1726 denise.eckstein 1.1 <h5>PEGASUS_USE_SYSLOGS</h5>
1727 <ul>
1728 <b>Description: </b>If set, OpenPegasus will be built
1729 to send log messages to the system logger (syslog).
1730 Otherwise, log messages will be sent to OpenPegasus
1731 specific log files.<br>
1732 <b>Recommended Value (Development Build): </b>Set<br>
1733 <b>Recommended Value (Release Build): </b>Set<br>
1734 <b>Required: </b>No<br>
1735 <b>Considerations: </b>This variable is currently
1736 not implemented as an environment variable. To use
1737 the option -DPEGASUS_USE_SYSLOGS must
1738 be explicitly included in the appropriate platform
1739 makefile (pegasus/mak/platform_*.mak).</ul>
1740
1741 <h5>PEGASUS_WINDOWS_SDK_HOME</h5>
1742 <ul>
|
1743 kumpf 1.12 <b>Description: </b>This variable should be set to point
1744 to the Microsoft Platform SDK on Windows if using a compiler
|
1745 denise.eckstein 1.1 version < 1300 (i.e. VC6). If using VC7 or VC8, this flag
1746 does not need to be set, as the necessary libraries are already
1747 included.<br>
1748 <b>Recommended Value (Development Build): </b>
1749 No Specific Recommendation<br>
1750 <b>Recommended Value (Release Build): </b>
1751 No Specific Recommendation<br>
1752 <b>Required: </b>Yes, if building on Windows with a
1753 compiler version < 1300.<br>
1754 </ul>
1755
|
1756 kumpf 1.6 <h5>SQLITE_HOME</h5>
1757 <ul>
1758 <b>Description: </b>Specifies the location of the SQLite SDK directory.
1759 This directory must contain sqlite3.h in the $(SQLITE_HOME)/include
1760 directory, and libsqlite3 in the $(SQLITE_HOME)/lib directory.<br>
1761 <b>Default Value: </b>Not Set<br>
1762 <b>Recommended Value (Development Build): </b>
1763 No Specific Recommendation<br>
1764 <b>Recommended Value (Release Build): </b>
1765 No Specific Recommendation<br>
1766 <b>Required: </b>Yes, if PEGASUS_USE_SQLITE_REPOSITORY is set to true
1767 and the SQLite files are not installed in locations that are searched by
1768 default.<br>
1769 <b>Considerations: </b>This environment variable is only used if
1770 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1771 </ul>
1772
|
1773 denise.eckstein 1.1 <h4>Examples Building a Linux IA32 (#IA64) Development/Debug Version</h4>
1774 <ul>
1775 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
|
1776 kumpf 1.12 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
|
1777 denise.eckstein 1.1 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
|
1778 kumpf 1.12 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1779 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1780 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
|
1781 kumpf 1.12 export PEGASUS_HAS_SSL=yes<br>
|
1782 denise.eckstein 1.1 export PEGASUS_DEBUG=TRUE<br>
1783 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
|
1784 kumpf 1.12 export PEGASUS_USE_SYSLOGS=true<br>
|
1785 denise.eckstein 1.1 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1786 </ul>
1787
1788 <h4>Building a Linux IA32 (#IA64) Production Release Version</h4>
1789 <ul>
1790 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1791 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1792 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1793 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
|
1794 kumpf 1.12 export PEGASUS_DISABLE_CQL=true <br>
|
1795 denise.eckstein 1.1 export PEGASUS_PAM_AUTHENTICATION=true <br>
1796 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1797 export PEGASUS_HAS_SSL=yes<br>
1798 export PEGASUS_USE_RELEASE_CONFIG_OPTIONS=true<br>
|
1799 kumpf 1.12 export PEGASUS_USE_RELEASE_DIRS=true<br>
|
1800 denise.eckstein 1.1 export PEGASUS_NOASSERTS=true<br>
1801 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1802 export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true<br>
1803 export PEGASUS_USE_SYSLOGS=true<br>
1804 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1805 </ul>
1806
1807 <h3>Environment Variable Settings for <u>Running</u> OpenPegasus</h3>
1808
1809 <h4>Definitions</h4>
1810
1811 <h5>PEGASUS_HOME</h5>
1812 <ul>
|
1813 kumpf 1.12 <b>Description: </b>There are multiple options for
|
1814 denise.eckstein 1.1 configuring the location of OpenPegasus runtime
|
1815 kumpf 1.12 files (e.g., configuration files, libraries,
|
1816 denise.eckstein 1.1 repository, executables). If no other option is
1817 specified, OpenPegasus will attempt to use the value
1818 PEGASUS_HOME.<br>
1819 <b>Default Value: </b>"."<br>
1820 <b>Recommended Value (Development Build): </b>
1821 The same value defined at build time.<br>
1822 <b>Recommended Value (Release Build): </b>Not Set<br>
1823 <b>Required: </b>No<br>
1824 <b>Considerations: </b>Although this variable can be
1825 useful in a development environment use of this environment
1826 variable is not recommended in a production environment.
1827 Instead, the use of configuration properties to explicitly
1828 set the location of runtime files and directories is recommended.
1829 </ul>
1830
1831 <h5>PEGASUS_MSG_HOME</h5>
1832 <ul>
1833 <b>Description: </b>This value is not used by the CIM
1834 Server. The CIM Server uses the messageDir configuration
1835 parameter to locate the directory where the ICU resource bundles.
1836 However, CIM Client applications must rely on an alternative
1837 denise.eckstein 1.1 mechanism to locate this directory.<br>
|
1838 kumpf 1.12 <b>Default Value: </b>if $PEGASUS_HOME is set then
|
1839 denise.eckstein 1.1 "$PEGASUS_HOME/msg" else "."<br>
1840 <b>Recommended Value (Development Build): </b>$PEGASUS_HOME/msg<br>
1841 <b>Recommended Value (Release Build): </b>Not Set <br>
1842 <b>Required: </b>No<br>
1843 </ul>
1844
1845 <h3>Configuration Properties</h3>
1846
1847 <h4>Notation</h4>
1848
|
1849 kumpf 1.12 <p>This section describes the notation used to define the
|
1850 denise.eckstein 1.1 configuration properties.</p>
1851
1852 <ul>
1853
1854 <h5>Default Value</h5>
1855 The value of <i>Default Value</i> is the OpenPegasus
1856 default setting for this configuration option. This
1857 value is used if a platform-specific setting is not
|
1858 kumpf 1.12 defined.
|
1859 denise.eckstein 1.1
1860 <h5>Recommended Default Value</h5>
|
1861 kumpf 1.12 The PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a
1862 platform vendor to easily toggle between two sets of
|
1863 denise.eckstein 1.1 configurations options, a set of options tuned for the
|
1864 kumpf 1.12 development/debug ("Development Build") environment
|
1865 denise.eckstein 1.1 and a set of options tuned for the production environment
|
1866 kumpf 1.12 ("Release Build"). The value of
1867 <i>Recommended Value (Development Build)</i>
|
1868 denise.eckstein 1.1 is the recommended default value for use in a development/
|
1869 kumpf 1.12 debug environment. The value of
|
1870 denise.eckstein 1.1 <i>Recommended Value (Release Build)</i> is the recommended
|
1871 kumpf 1.12 default value for use in a production environment.
1872
|
1873 denise.eckstein 1.1 <h5>Recommend To Be Fixed/Hidden</h5>
1874 Configuration options can be defined as fixed or hidden.
1875 A "fix" configuration option is set at build time
|
1876 kumpf 1.12 and cannot be changed without rebuilding. "Fixed"
|
1877 denise.eckstein 1.1 configuration options are not displayed using the cimconfig
|
1878 kumpf 1.12 command. This feature can be used by vendors to limit
|
1879 denise.eckstein 1.1 OpenPegasus functionality and configurability.
|
1880 kumpf 1.12
1881 A "hidden" configuration option is an option that is
|
1882 denise.eckstein 1.1 configurable (i.e., "not fixed"), but not externally
1883 advertised using the cimconfig command. The "hidden"
1884 feature can be used to define "internal use only"
1885 configuration options.
|
1886 kumpf 1.12
|
1887 denise.eckstein 1.1 <h5>Dynamic?</h5>
1888 If yes, the value of the configuration option can be
1889 changed without stopping and restarting the CIM Server.
1890
1891 <h5>Directory Specifications</h5>
1892 <p>Note that the variables included in the following table
|
1893 kumpf 1.12 (e.g., $LOGDIR) are for documentation purposes only and
1894 have been defined to simplify the description of the
1895 configuration options. In particular,
|
1896 denise.eckstein 1.1 these variables DO NOT correspond to environment variables
|
1897 kumpf 1.12 implemented in the OpenPegasus code. Default values
1898 for the following variables are platform
|
1899 denise.eckstein 1.1 and vendor dependent and not documented in this document.</p>
1900
1901 <table border="1" cellspacing="1" bordercolordark="#666666"
1902 bordercolorlight="#CCCCCC" width=148
1903 style='font-size=10.0pt;font-family:Arial' height="228">
1904 <tr>
1905 <th bgcolor="#CAE6CA" width=1 height="16"> </th>
1906 </tr>
1907 <tr align="center">
1908 <td align="left" width="1" height="12">$LOGDIR</td>
1909 </tr>
1910 <tr align="center">
1911 <td align="left" width="1" height="14">$PROVIDERDIRS</td>
1912 </tr>
1913 <tr align="center">
1914 <td align="left" width="1" height="14">
1915 $PROVIDERMANAGERDIRS</td>
1916 </tr>
1917 <tr align="center">
1918 <td align="left" width="1" height="14">$REPOSITORYDIR </td>
1919 </tr>
1920 denise.eckstein 1.1 <tr align="center">
1921 <td align="left" width="1" height="14">$CERTIFICATEDIR
1922 </td>
1923 </tr>
1924 <tr align="center">
1925 <td align="left" width="1" height="14">$LOCALAUTHDIR</td>
1926 </tr>
1927 <tr align="center">
1928 <td align="left" width="1" height="14">$TRACEDIR</td>
1929 </tr>
1930 <tr align="center">
1931 <td align="left" width="1" height="14">$CONFIGDIR</td>
1932 </tr>
1933 <tr align="center">
1934 <td align="left" width="1" height="14">$PIDFILE</td>
1935 </tr>
1936 <tr align="center">
1937 <td align="left" width="1" height="14">$RANDOMDIR</td>
1938 </tr>
1939 <tr align="center">
1940 <td align="left" width="1" height="14">$SOCKETDIR</td>
1941 denise.eckstein 1.1 </tr>
1942 <tr align="center">
1943 <td align="left" width="1" height="14">$MESSAGEDIR</td>
1944 </tr>
1945 </table>
|
1946 kumpf 1.12 </ul>
|
1947 denise.eckstein 1.1
1948 <h4>Definitions</h4>
1949
1950 <h5>authorizedUserGroups</h5>
1951 <ul>
|
1952 kumpf 1.12 <b>Description:</b> If the <b>authorizedUserGroups</b>
|
1953 denise.eckstein 1.1 property is set, the value is interpreted as a list of
1954 comma-separated user groups whose members may issue CIM
1955 requests. A user who is not a member of any of these groups is
1956 restricted from issuing CIM requests, with the exception of
1957 privileged users (root user). If the <b>authorizedUserGroups</b>
1958 property is not set, any user may issue CIM requests.<br>
1959 <b>Default Value: </b>blank<br>
1960 <b>Recommended Default Value (Development Build): </b>blank<br>
1961 <b>Recommended Default Value (Release Build): </b>blank<br>
1962 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1963 No/No<br>
1964 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
1965 <b>Dynamic?: </b>No<br>
1966 <b>Example: </b>
1967 #cimconfig -s authorizedUserGroups=users,systemusers -p<br>
1968 <b>Considerations: </b>This feature is available only when
1969 the OpenPegasus source is compiled with the flag
1970 PEGASUS_ENABLE_USERGROUP_AUTHORIZATION set.
1971 </ul>
1972
1973 <h5>daemon</h5>
1974 denise.eckstein 1.1 <ul>
1975 <b>Description: </b>This option enables/disables forking of
1976 the code to create a background daemon process.<br>
1977 <b>Default Value: </b>true<br>
1978 <b>Recommended Default Value (Development Build): </b>true<br>
1979 <b>Recommended Default Value (Release Build): </b>true<br>
1980 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1981 No/No<br>
1982 <b>Recommend To Be Fixed/Hidden (Release Build): </b>
1983 No/Yes<br>
1984 <b>Dynamic?: </b>No<p> <br>
1985 <br>
1986 <table border="1" cellspacing="1" bordercolordark="#666666"
1987 bordercolorlight="#CCCCCC" width=531
1988 style='font-size=10.0pt;font-family:Arial'>
1989 <tr>
1990 <th bgcolor="#CAE6CA" width="168">Platform</th>
1991 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
1992 </tr>
1993 <tr align="center">
1994 <td width="168">Linux</td>
1995 denise.eckstein 1.1 <td align="left" width="350">
1996 Pegasus/Config/DefaultPropertyTableLinux.h</td>
1997 </tr>
1998 <tr align="center">
1999 <td width="168">HP-UX</td>
2000 <td align="left" width="350">
2001 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2002 </tr>
2003 <tr align="center">
2004 <td width="168">OpenVMS</td>
2005 <td align="left" width="350">
2006 Pegasus/Config/DefaultPropertyTableVms.h</td>
2007 </tr>
2008 </table>
2009 </ul>
2010
2011 <h5>enableAssociationTraversal</h5>
2012 <ul>
2013 <b>Description: </b>If true, the CIM Server will support
|
2014 kumpf 1.12 the four association traversal operators: Associators,
|
2015 denise.eckstein 1.1 AssociatorNames,References, and ReferenceNames.<br>
2016 <b>Default Value: </b>true<br>
2017 <b>Recommended Default Value (Development Build): </b>true<br>
2018 <b>Recommended Default Value (Release Build): </b>true<br>
2019 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2020 No/No<br>
2021 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2022 <b>Dynamic?: </b>No<br>
|
2023 kumpf 1.12 <b>Considerations: </b>There is still an outstanding
|
2024 denise.eckstein 1.1 Provider Registration issue that restricts the degree to
2025 which separate Providers can register for Associations.<br>
2026 <br>
2027 <table border="1" cellspacing="1" bordercolordark="#666666"
2028 bordercolorlight="#CCCCCC" width=531
2029 style='font-size=10.0pt;font-family:Arial'>
2030 <tr>
2031 <th bgcolor="#CAE6CA" width="168">Platform</th>
2032 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2033 </tr>
2034 <tr align="center">
2035 <td width="168">Linux</td>
2036 <td align="left" width="350">
2037 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2038 </tr>
2039 <tr align="center">
2040 <td width="168">HP-UX</td>
2041 <td align="left" width="350">
2042 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2043 </tr>
2044 <tr align="center">
2045 denise.eckstein 1.1 <td width="168">OpenVMS</td>
2046 <td align="left" width="350">
2047 Pegasus/Config/DefaultPropertyTableVms.h</td>
2048 </tr>
2049 </table>
2050 </ul>
2051
2052 <h5>enableAuditLog</h5>
2053 <ul>
|
2054 kumpf 1.12 <b>Description: </b>Used to enable or disable audit
|
2055 denise.eckstein 1.1 logging at run time. If true, audit logging will be enabled.<br>
2056 <b>Recommended Default Value (Development Build): </b>false<br>
2057 <b>Recommended Default Value (Release Build): </b>false<br>
2058 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2059 No/No<br>
2060 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2061 <b>Dynamic?: </b>Yes<br>
2062 <b>Source Configuration File: </b>
2063 Pegasus/Config/DefaultPropertyTable.h<br>
2064 </ul>
2065
2066 <h5>enableAuthentication</h5>
2067 <ul>
2068 <b>Description: </b>If true, a Client must be authenticated
2069 to access the CIM Server.<br>
2070 <b>Recommended Default Value (Development Build): </b>false<br>
2071 <b>Recommended Default Value (Release Build): </b>true<br>
2072 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2073 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2074 <b>Dynamic?: </b>No<br>
2075 <b>Source Configuration File: </b>
2076 denise.eckstein 1.1 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2077 </ul>
2078
2079 <h5>enableBinaryRepository</h5>
2080 <ul>
2081 <b>Description: </b>Setting this to true will activate the
2082 binary repository support on the next restart of cimserver.<br>
2083 <b>Recommended Default Value (Development Build): </b>false<br>
2084 <b>Recommended Default Value (Release Build): </b>false<br>
2085 <b>Recommend To Be Fixed/Hidden (Development Build): </b>Yes<br>
2086 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2087 <b>Dynamic?: </b>No<br>
2088 <b>Considerations: </b>Repositories containing a mixture
2089 of binary and XML objects are supported.<br>
2090 <b>Source Configuration File: </b>
2091 Pegasus/Config/RepositoryPropertyOwner.cpp</p>
2092 </ul>
2093
2094
2095 <h5>enableHttpConnection</h5>
2096 <ul>
2097 denise.eckstein 1.1 <b>Description: </b>If true, allows connections to
2098 the CIM Server using the HTTP protocol<br>
2099 <b>Default Value: </b>true<br>
2100 <b>Recommended Default Value (Development Build): </b>true<br>
2101 <b>Recommended Default Value (Release Build): </b>false<br>
2102 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2103 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2104 <b>Dynamic?: </b>No<br>
2105 <b>Considerations: </b>
|
2106 kumpf 1.12 Enabling HTTP will allow clients to connect with security
2107 properties different than those associated with encrypted SSL
|
2108 denise.eckstein 1.1 traffic, and its configured SSL authentication or other security
2109 behavior. This option should only be enabled in environments
2110 where sending the HTTP Request and HTTP Response as
2111 clear text messages does not introduce a security risk.
|
2112 kumpf 1.12 Note that if authentication is enabled (enableAuthentication),
2113 user names and passwords will be included in the text of the
|
2114 denise.eckstein 1.1 HTTP message.<br>
2115 <br>
2116 <table border="1" cellspacing="1" bordercolordark="#666666"
2117 bordercolorlight="#CCCCCC" width=531
2118 style='font-size=10.0pt;font-family:Arial'>
2119 <tr>
2120 <th bgcolor="#CAE6CA" width="168">Platform</th>
2121 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2122 </tr>
2123 <tr align="center">
2124 <td width="168">Linux</td>
2125 <td align="left" width="350">
2126 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2127 </tr>
2128 <tr align="center">
2129 <td width="168">HP-UX</td>
2130 <td align="left" width="350">
2131 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2132 </tr>
2133 <tr align="center">
2134 <td width="168">OpenVMS</td>
2135 denise.eckstein 1.1 <td align="left" width="350">
2136 Pegasus/Config/DefaultPropertyTableVms.h</td>
2137 </tr>
2138 </table>
2139 </ul>
2140
2141 <h5>enableHttpsConnection</h5>
2142 <ul>
|
2143 kumpf 1.12 <b>Description: </b>If true, allows connections to
2144 the CIM Server using the HTTPS protocol (HTTP using
|
2145 denise.eckstein 1.1 Secure Socket Layer encryption)<br>
2146 <b>Default Value: </b>false<br>
2147 <b>Recommended Default Value (Development Build): </b>true<br>
2148 <b>Recommended Default Value (Release Build): </b>true<br>
2149 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2150 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2151 <b>Dynamic?: </b>No<br>
2152 <b>Considerations: </b>For this option to work,
2153 the environment variable PEGASUS_HAS_SSL must have
2154 been set when CIM Server was built.<br>
2155 <br>
2156 <table border="1" cellspacing="1" bordercolordark="#666666"
2157 bordercolorlight="#CCCCCC" width=531
2158 style='font-size=10.0pt;font-family:Arial'>
2159 <tr>
2160 <th bgcolor="#CAE6CA" width="168">Platform</th>
2161 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2162 </tr>
2163 <tr align="center">
2164 <td width="168">Linux</td>
2165 <td align="left" width="350">
2166 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2167 </tr>
2168 <tr align="center">
2169 <td width="168">HP-UX</td>
2170 <td align="left" width="350">
2171 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2172 </tr>
2173 <tr align="center">
2174 <td width="168">OpenVMS</td>
2175 <td align="left" width="350">
2176 Pegasus/Config/DefaultPropertyTableVms.h</td>
2177 </tr>
2178 </table>
2179 </ul>
2180
2181 <h5>enableIndicationService</h5>
2182 <ul>
2183 <b>Description: </b>If true, the CIM Server will support
2184 CIM Indications.<br>
2185 <b>Default Value: </b>true<br>
2186 <b>Recommended Default Value (Development Build): </b>true<br>
2187 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>true<br>
2188 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2189 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2190 <b>Dynamic?: </b>No<p> <br>
2191 <br>
2192 <table border="1" cellspacing="1" bordercolordark="#666666"
2193 bordercolorlight="#CCCCCC" width=531
2194 style='font-size=10.0pt;font-family:Arial'>
2195 <tr>
2196 <th bgcolor="#CAE6CA" width="168">Platform</th>
2197 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2198 </tr>
2199 <tr align="center">
2200 <td width="168">Linux</td>
2201 <td align="left" width="350">
2202 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2203 </tr>
2204 <tr align="center">
2205 <td width="168">HP-UX</td>
2206 <td align="left" width="350">
2207 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2208 denise.eckstein 1.1 </tr>
2209 <tr align="center">
2210 <td width="168">OpenVMS</td>
2211 <td align="left" width="350">
2212 Pegasus/Config/DefaultPropertyTableVms.h</td>
2213 </tr>
2214 </table>
2215 </ul>
2216
2217 <h5>enableNamespaceAuthorization</h5>
2218 <ul>
2219 <b>Description: </b>If true, the CIM Server restricts
|
2220 kumpf 1.12 access to namespaces based on configured user authorizations
2221 [user authorizations may be configured using the cimauth
|
2222 denise.eckstein 1.1 command]<br>
2223 <b>Default Value: </b>false<br>
2224 <b>Recommended Default Value (Development Build): </b>false<br>
2225 <b>Recommended Default Value (Release Build): </b>false<br>
2226 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2227 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2228 <b>Dynamic?: </b>No<br>
2229 <b>Considerations: </b>
2230 This option offers limited functionality and, in most
2231 environments, expensive to administer. It's use is not
2232 recommended.<br>
2233 <b>Source Configuration File: </b>
2234 Pegasus/Config/SecurityPropertyOwner.cpp</ul>
2235
2236 <h5>enableNormalization</h5>
2237 <ul>
|
2238 kumpf 1.12 <b>Description: </b>If true, objects returned from instance
|
2239 denise.eckstein 1.1 providers are validated and normalized. <br>
2240 <b>Default Value: </b>true<br>
2241 <b>Recommended Default Value (Development Build): </b>true<br>
2242 <b>Recommended Default Value (Release Build): </b>false<br>
2243 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2244 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2245 kavita.gupta 1.7 <b>Dynamic?: </b>Yes<br>
|
2246 denise.eckstein 1.1 <b>Considerations: </b>
2247 <ul>
2248 <li>Any errors encountered during normalization result in a
|
2249 kumpf 1.12 CIMException with the status code set to CIM_ERR_FAILED
2250 and a meaningful, context specific error description
|
2251 denise.eckstein 1.1 (messages will be localized). Providers that catch the
|
2252 kumpf 1.12 exception have an opportunity to handle the error.
|
2253 denise.eckstein 1.1 Otherwise, the exception is passed to the Provider Manager
|
2254 kumpf 1.12 and becomes the response for that Provider.
|
2255 denise.eckstein 1.1 <li>Provider Modules that are listed on the
|
2256 kumpf 1.12 excludeModulesFromNormalization
2257 configuration option are excluded from normalization.
|
2258 denise.eckstein 1.1 <li>Since the concept of normalization is relatively new to
2259 OpenPegasus and it establishes and enforces rules for
|
2260 kumpf 1.12 objects returned by providers, it should only
2261 apply to providers written against the SDK in which it was
|
2262 denise.eckstein 1.1 introduced (or later). Therefore only Provider Modules that
|
2263 kumpf 1.12 have the following InterfaceType and InterfaceVersion
2264 combination will be subject to normalization:
|
2265 denise.eckstein 1.1 <ul>
|
2266 kumpf 1.12 <li>'C++Default' / 2.5.0 or greater
2267 <li>'CMPI' / 2.0.0 or greater
|
2268 denise.eckstein 1.1 <li>'JMPI' / 1.0.0 or greater
2269 </ul>
2270 </ul>
2271 <b>Source Configuration File: </b>
2272 Pegasus/Config/NormalizationPropertyOwner.cpp<br>
2273 </ul>
2274
2275
2276 <h5>enableRemotePrivilegedUserAccess</h5>
2277 <ul>
|
2278 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows
|
2279 denise.eckstein 1.1 access by a privileged user from a remote system<br>
2280 <b>Default Value: </b>true<br>
2281 <b>Recommended Default Value (Development Build): </b>true<br>
2282 <b>Recommended Default Value (Release Build): </b>true<br>
2283 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2284 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2285 <b>Dynamic?: </b>No<br>
2286 <b>Considerations: </b>Many management operations require
2287 privileged user access. Disabling remote access by
|
2288 kumpf 1.12 privileged user could significantly affect
|
2289 denise.eckstein 1.1 functionality.<br>
2290 <b>Source Configuration File: </b>
2291 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2292 </ul>
2293
2294 <h5>enableSSLExportClientVerification</h5>
2295 <ul>
|
2296 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows HTTPS
|
2297 denise.eckstein 1.1 connection for CIMExport requests on the port specified by the
2298 service name "wbem-exp-https".<br>
2299 <b>Default Value: </b>false<br>
2300 <b>Recommended Default Value (Development Build): </b>true<br>
2301 <b>Recommended Default Value (Release Build): </b>false<br>
2302 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2303 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2304 <b>Dynamic?: </b>No<br>
2305 <b>Source Configuration File: </b>
2306 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2307 </ul>
2308
2309
2310 <h5>enableSubscriptionsForNonprivilegedUsers</h5>
2311 <ul>
2312 <b>Description: </b>If true, operations (create instance,
|
2313 kumpf 1.12 modify instance, delete instance, get instance, enumerate
2314 instances, enumerate instance names) on indication
2315 filter, listener destination, and subscription instances
|
2316 denise.eckstein 1.1 may be performed by non-privileged users. Otherwise, these
2317 operations may only be performed on these instances by
2318 privileged users.<br>
2319 <b>Default Value: </b>true<br>
2320 <b>Recommended Default Value (Development Build): </b>true<br>
2321 <b>Recommended Default Value (Release Build): </b>false<br>
2322 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2323 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2324 <b>Dynamic?: </b>No<br>
|
2325 kumpf 1.12 <b>Considerations: </b>This option has meaning only if
|
2326 denise.eckstein 1.1 enableIndicationService=true.<br>
2327 <b>Source Configuration File: </b>
2328 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2329 </ul>
2330
2331 <h5>excludeModulesFromNormalization</h5>
2332 <ul>
|
2333 kumpf 1.12 <b>Description: </b>If the excludeModulesfromNormalization
2334 property is set, the value is interpreted as a list of
2335 comma-separated Provider Module names (as specified in
2336 PG_ProviderModule.Name) to exclude from validation and
|
2337 denise.eckstein 1.1 normalization.<br>
2338 <b>Default Value: </b>""<br>
2339 <b>Recommended Default Value (Development Build):</b>
2340 ""<br>
2341 <b>Recommended Default Value (Release Build): </b>
2342 ""<br>
2343 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2344 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2345 <b>Dynamic?: </b>No<br>
2346 <b>Considerations: </b>All objects managed by all
2347 providers will be excluded from validation and normalization
2348 if its module name appears in this list.<br>
2349 <b>Source Configuration File: </b>
2350 Pegasus/Config/NormalizationPropertyOwner.cpp
2351 </ul>
2352
2353
2354 <h5><b>exportSSLTrustStore</b></h5>
2355 <ul>
2356 <b>Description: </b>Specifies the location of the OpenSSL
2357 truststore for Indications. Consistent with the OpenSSL
2358 denise.eckstein 1.1 implementation, a truststore can be either a file or directory.
2359 If the truststore is a directory, all the certificates within
2360 the directory are considered trusted.<br>
2361 <b>Default Value: </b>indication_trust.pem<br>
2362 <b>Recommended Default Value (Development Build): </b>
2363 indication_trust.pem<br>
2364 <b>Recommended Default Value (Release Build): </b>
2365 $CERTIFICATEDIR/indication_trust.pem<br>
2366 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2367 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2368 <b>Dynamic?: </b>No<br>
2369 <b>Source Configuration File: </b>
2370 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2371 </ul>
2372
2373 <h5>forceProviderProcesses</h5>
2374 <ul>
2375 <b>Description: </b>If true, the CIM Server runs Providers
2376 in separate processes rather than loading and calling Provider
2377 libraries directly within the CIM Server process.<br>
|
2378 kumpf 1.12 <b>Default Value: </b>Dependent on the value of
|
2379 denise.eckstein 1.1 PEGASUS_DEFAULT_ENABLE_OOP<br>
2380 <b>Recommended Default Value (Development Build):</b>true (HP-UX,
2381 Linux)<br>
2382 <b>Recommended Default Value (Release Build): </b>true (HP-UX,
2383 Linux)<br>
2384 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2385 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2386 <b>Dynamic?: </b>No<br>
2387 <b>Considerations: </b>In a dynamic, potentially multi-vendor,
|
2388 kumpf 1.12 environment, the ability to run Providers in separate processes
2389 can significantly increase the stability, maintainability and
|
2390 denise.eckstein 1.1 supportability of the overall solution. Running Providers
2391 in separate process spaces: (1) helps isolate components (i.e.,
|
2392 kumpf 1.12 cimserver and Providers) from a catastrophic failure
|
2393 denise.eckstein 1.1 (segmentation faults, memory leaks) of a single Provider and (2)
2394 reduces the risk of accidental or malicious sharing of sensitive
|
2395 kumpf 1.12 data among Providers. This benefit comes at a cost.
2396 Moving Providers out of the cimserver process increases
|
2397 denise.eckstein 1.1 communication costs and can significantly increase response
2398 time. Actual results will vary, but it is common for
2399 response times to increase by a factor of 2.<br>
|
2400 kumpf 1.12 <b>Note 1: </b>When forceProviderProcesses is true, the CIM
|
2401 denise.eckstein 1.1 Server will load each Provider Module (i.e., library) into a
2402 separate process. Providers in different Provider Modules
2403 cannot depend on a communication mechanism that
2404 requires them to run in the same process space.<br>
|
2405 kumpf 1.12 <b>Note 2: </b>Although the catastrophic failure of an
|
2406 denise.eckstein 1.1 Out-Of-Process (OOP) Provider Module will not result in a
2407 failure of the CIM Server process, if the failed OOP Provider
|
2408 kumpf 1.12 Module included Indication Providers, Indications may be
|
2409 denise.eckstein 1.1 lost. If logging is enabled, the CIM Server will log a
2410 message informing administrators of what happened and what
2411 corrective actions can be taken.<br>
2412 <br>
2413 <table border="1" cellspacing="1" bordercolordark="#666666"
2414 bordercolorlight="#CCCCCC" width=531
2415 style='font-size=10.0pt;font-family:Arial'>
2416 <tr>
2417 <th bgcolor="#CAE6CA" width="168">Platform</th>
2418 <th bgcolor="#CAE6CA" width=350>
2419 Source Configuration File</th>
2420 </tr>
2421 <tr align="center">
2422 <td width="168">Linux</td>
2423 <td align="left" width="350">
2424 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2425 </tr>
2426 <tr align="center">
2427 <td width="168">HP-UX</td>
2428 <td align="left" width="350">
2429 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2430 denise.eckstein 1.1 </tr>
2431 <tr align="center">
2432 <td width="168">OpenVMS</td>
2433 <td align="left" width="350">
2434 Pegasus/Config/DefaultPropertyTableVms.h</td>
2435 </tr>
2436 </table>
2437 </ul>
2438
2439 <h5>home</h5>
2440 <ul>
2441 <b>Description: </b>If set, this configuration option defines
2442 the runtime default value for PEGASUS_HOME.<br>
2443 <b>Default Value: </b>"./"<br>
2444 <b>Recommended Default Value (Development Build)</b>"./"<br>
2445 <b>Recommended Default Value (Release Build)""</b><br>
2446 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2447 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2448 <b>Dynamic?: </b>No<p> <br>
2449 <br>
2450 <table border="1" cellspacing="1" bordercolordark="#666666"
2451 denise.eckstein 1.1 bordercolorlight="#CCCCCC" width=531
2452 style='font-size=10.0pt;font-family:Arial'>
2453 <tr>
2454 <th bgcolor="#CAE6CA" width="168">Platform</th>
2455 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2456 </tr>
2457 <tr align="center">
2458 <td width="168">Linux</td>
2459 <td align="left" width="350">
2460 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2461 </tr>
2462 <tr align="center">
2463 <td width="168">HP-UX</td>
2464 <td align="left" width="350">
2465 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2466 </tr>
2467 <tr align="center">
2468 <td width="168">OpenVMS</td>
2469 <td align="left" width="350">
2470 Pegasus/Config/DefaultPropertyTableVms.h</td>
2471 </tr>
2472 denise.eckstein 1.1 </table>
2473 </ul>
2474
2475 <h5>httpPort</h5>
2476 <ul>
|
2477 kumpf 1.12 <b>Description: </b>OpenPegasus first attempts to look up the
|
2478 denise.eckstein 1.1 port number for HTTP using getservbyname for the 'wbem-http'
|
2479 kumpf 1.12 service. The httpPort configuration setting is used only when the
|
2480 denise.eckstein 1.1 getservbyname lookup fails.<br>
2481 <b>Default Value: </b>blank<br>
2482 <b>Recommended Default Value (Development Build): </b>blank<br>
2483 <b>Recommended Default Value (Release Build): </b>5988<br>
2484 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2485 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2486 <b>Dynamic?: </b>No<br>
|
2487 kumpf 1.12 <b>Considerations: </b>(1)The use of 5988 for WBEM HTTP is
|
2488 denise.eckstein 1.1 recommended by the DMTF. This port has been registered with
2489 <a href="http://www.iana.org/assignments/port-numbers">
2490 IANA</a>. In a production environment, the recommendation is
2491 to use /etc/services to configure the value of this port. (2)
|
2492 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2493 httpPort was changed from 5988 to "". This
|
2494 denise.eckstein 1.1 change was made to allow the OpenPegasus to differentiate
|
2495 kumpf 1.12 between a default setting of 5988 and a customer-defined
|
2496 denise.eckstein 1.1 setting of 5988. With this change, if the port
|
2497 kumpf 1.12 number is explicitly set, the configured port will be used
|
2498 denise.eckstein 1.1 regardless of the settings in /etc/services. If no port number
2499 is specified, the server will continue to use the value in
2500 /etc/services.<br>
2501 <br>
2502 <table border="1" cellspacing="1" bordercolordark="#666666"
2503 bordercolorlight="#CCCCCC" width=531
2504 style='font-size=10.0pt;font-family:Arial'>
2505 <tr>
2506 <th bgcolor="#CAE6CA" width="168">Platform</th>
2507 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2508 </tr>
2509 <tr align="center">
2510 <td width="168">Linux</td>
2511 <td align="left" width="350">
2512 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2513 </tr>
2514 <tr align="center">
2515 <td width="168">HP-UX</td>
2516 <td align="left" width="350">
2517 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2518 </tr>
2519 denise.eckstein 1.1 <tr align="center">
2520 <td width="168">OpenVMS</td>
2521 <td align="left" width="350">
2522 Pegasus/Config/DefaultPropertyTableVms.h</td>
2523 </tr>
2524 </table>
2525 </ul>
2526
2527 <h5>httpsPort</h5>
2528 <ul>
2529 <b>Description: </b>
2530 OpenPegasus first attempts to look up the port number for HTTPS
2531 using getservbyname for the 'wbem-https' service. The httpsPort
|
2532 kumpf 1.12 configuration setting is used only when the getservbyname lookup
|
2533 denise.eckstein 1.1 fails.<br>
2534 <b>Default Value: </b>blank<br>
2535 <b>Recommended Default Value (Development Build): </b>blank<br>
2536 <b>Recommended Default Value (Release Build): </b>5989<br>
2537 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2538 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2539 <b>Dynamic?: </b>No<br>
2540 <b>Considerations: </b>(1)The use of 5989 for WBEM HTTPS
2541 is recommended by the DMTF. This port has been registered with
2542 <a href="http://www.iana.org/assignments/port-numbers">IANA</a>.
|
2543 kumpf 1.12 In a production environment, the recommendation is to use
|
2544 denise.eckstein 1.1 /etc/services to configure the value of this port.(2)
|
2545 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2546 httpPort was changed from 5989 to "". This
2547 change was made to allow the OpenPegasus to differentiate
2548 between a default setting of 5989 and a customer-defined
|
2549 denise.eckstein 1.1 setting of 5989. With this change, if the port number
|
2550 kumpf 1.12 is explicitly set, the configured port will be used regardless
|
2551 denise.eckstein 1.1 of the settings in /etc/services. If no port number is specified,
2552 the server will continue to use the value in /etc/services.<br>
2553 <br>
2554
2555 <table border="1" cellspacing="1" bordercolordark="#666666"
2556 bordercolorlight="#CCCCCC" width=531
2557 style='font-size=10.0pt;font-family:Arial'>
2558 <tr>
2559 <th bgcolor="#CAE6CA" width="168">Platform</th>
2560 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2561 </tr>
2562 <tr align="center">
2563 <td width="168">Linux</td>
2564 <td align="left" width="350">
2565 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2566 </tr>
2567 <tr align="center">
2568 <td width="168">HP-UX</td>
2569 <td align="left" width="350">
2570 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2571 </tr>
2572 denise.eckstein 1.1 <tr align="center">
2573 <td width="168">OpenVMS</td>
2574 <td align="left" width="350">
2575 Pegasus/Config/DefaultPropertyTableVms.h</td>
2576 </tr>
2577 </table>
2578 </ul>
2579
2580 <h5>idleConnectionTimeout</h5>
2581 <ul>
2582 <b>Description: </b>If set to a positive integer, this value
2583 specifies a minimum timeout value for idle client connections.
2584 If set to zero, idle client connections do not time out.<br>
2585 <b>Recommended Default Value (Development Build): </b>0<br>
2586 <b>Recommended Default Value (Release Build): </b>0<br>
2587 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2588 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2589 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2590 denise.eckstein 1.1 <b>Considerations: </b>A client connection is considered
2591 idle when it is not in the process of sending a request and
2592 the CIM Server is not processing a request from that connection.
|
2593 kumpf 1.12 An idle connection timeout allows reclamation of the system
|
2594 denise.eckstein 1.1 resources allocated for idle CIM Server connections. Note that
2595 the CIM Server may allow an idle connection to persist longer
|
2596 kumpf 1.12 than the configured timeout value based on server activity.
2597 Some client applications may not behave correctly if a
|
2598 denise.eckstein 1.1 connection timeout is introduced. Client compatibility should be
2599 considered when configuring an idle connection timeout value.
|
2600 kumpf 1.12 The idle connection time is computed using the system clock.
|
2601 denise.eckstein 1.1 Thus, resetting the system clock may cause unexpected timeout
|
2602 kumpf 1.12 behavior.This config property can be changed dynamically. The
|
2603 kavita.gupta 1.11 changes will apply to all new and existing connections. <br>
|
2604 denise.eckstein 1.1 </ul>
2605
2606 <h5>logdir</h5>
2607 <ul>
2608 <b>Description: </b>Specifies the name of the directory
2609 to be used for the OpenPegasus specific log files.<br>
2610 <b>Recommended Default Value (Development Build): </b>logs<br>
2611 <b>Recommended Default Value (Release Build): </b>$LOGDIR<br>
2612 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2613 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2614 <b>Dynamic?: </b>Yes<br>
|
2615 kumpf 1.12 <b>Considerations: </b>This option is not supported if
|
2616 denise.eckstein 1.1 PEGASUS_USE_SYSLOGS is defined.<br>
2617 <b>Source Configuration File: </b>
2618 Pegasus/Config/LogPropertyOwner.cpp<br>
2619 </ul>
2620
2621 <h5>logLevel</h5>
2622 <ul>
|
2623 kumpf 1.12 <b>Description: </b>Defines the desired level of logging.
|
2624 denise.eckstein 1.1 Valid values include: TRACE, INFORMATION, WARNING, SEVERE,
2625 FATAL.<br>
2626 <b>Default Value: </b>"INFORMATION"<br>
2627 <b>Recommended Default Value (Development Build): </b>
2628 "INFORMATION"<br>
2629 <b>Recommended Default Value (Release Build): </b>"SEVERE"<br>
2630 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2631 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2632 <b>Dynamic?: </b>Yes<br>
2633 <b>Considerations: </b><br>
2634 <b>Source Configuration File: </b>
2635 Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2636 </ul>
2637
|
2638 mreddy 1.3 <h5>maxLogFileSizeKBytes</h5>
2639 <ul>
|
2640 kumpf 1.12 <b>Description: </b>Specifies the maximum size of the logfile in Kilo
|
2641 mreddy 1.3 Bytes. If the logfile size exceeds maxLogFileSizeKBytes logfile will be pruned.<br>
2642 <b>Default Value: </b>32768<br>
2643 <b>Recommended Default Value (Development Build): </b> 32768<br>
2644 <b>Recommended Default Value (Release Build): </b>32768<br>
2645 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2646 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/No<br>
2647 <b>Dynamic?:</b> Yes<br>
2648 <b>Considerations:</b> This option is not supported if PEGASUS_USE_SYSLOGS is defined. Minimum accepted value is 32 KB. <br>
2649 <b>Source Configuration File:</b> Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2650 </ul>
|
2651 denise.eckstein 1.1 <h5>maxProviderProcesses</h5>
2652 <ul>
2653 <b>Description:</b> Limits the number of provider
|
2654 kumpf 1.12 processes (see 'forceProviderProcesses) that may run
|
2655 denise.eckstein 1.1 concurrently. A 'maxProviderProcesses' value of '0' indicates
2656 that the number of Provider Agent processes is unlimited<br>
2657 <b>Default Value: </b>0<br>
2658 <b>Recommended Default Value (Development Build):</b> 0<br>
2659 <b>Recommended Default Value (Release Build):</b> 0<br>
2660 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2661 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
|
2662 kavita.gupta 1.9 <b>Dynamic?: </b>Yes<br>
|
2663 kumpf 1.12 <b>Considerations: </b>Consider there are five provider processes
2664 already running and the maxProviderProcesses is dynamically changed to
2665 four. In this case though new provider processes will not be created
|
2666 kavita.gupta 1.9 but existing five will continue running<br>
|
2667 denise.eckstein 1.1 <br>
2668 <table border="1" cellspacing="1" bordercolordark="#666666"
2669 bordercolorlight="#CCCCCC" width=531
2670 style='font-size=10.0pt;font-family:Arial'>
2671 <tr>
2672 <th bgcolor="#CAE6CA" width="168">Platform</th>
2673 <th bgcolor="#CAE6CA" width=350>
2674 Source Configuration File</th>
2675 </tr>
2676 <tr align="center">
2677 <td width="168">Linux</td>
2678 <td align="left" width="350">
2679 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2680 </tr>
2681 <tr align="center">
2682 <td width="168">HP-UX</td>
2683 <td align="left" width="350">
2684 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2685 </tr>
2686 <tr align="center">
2687 <td width="168">OpenVMS</td>
2688 denise.eckstein 1.1 <td align="left" width="350">
2689 Pegasus/Config/DefaultPropertyTableVms.h</td>
2690 </tr>
2691 </table>
2692 </ul>
2693
2694 <h5>messageDir</h5>
2695 <ul>
2696 <b>Description: </b>Specifies the name of the directory to
2697 be used for the OpenPegasus translated messages.<br>
2698 <b>Default Value: </b>msg<br>
2699 <b>Recommended Default Value (Development Build): </b>msg<br>
2700 <b>Recommended Default Value (Release Build):</b>
2701 $MESSAGEDIR/msg<br>
2702 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2703 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2704 <b>Dynamic?: </b>No<br>
2705 <b>Considerations: </b>Only used when message localization
2706 is enabled. See PEGASUS_HAS_MESSAGES for details.<br>
2707 <b>Source Configuration File: </b>
2708 FileSystemPropertyOwner.cpp<br>
2709 denise.eckstein 1.1 </ul>
2710
2711 <h5>providerDir</h5>
2712 <ul>
|
2713 kumpf 1.12 <b>Description: </b>Specifies the names of the directories
|
2714 denise.eckstein 1.1 that contains Provider executables.<br>
2715 <b>Recommended Default Value (Development Build): </b>lib<br>
2716 <b>Recommended Default Value (Release Build): </b>
2717 $PROVIDERDIRS<br>
2718 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2719 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
|
2720 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2721 denise.eckstein 1.1 <b>Considerations: </b>The CIM Server runs as a privileged
2722 user. And, since Providers run in the same process space as the
|
2723 kumpf 1.12 CIM Server, Providers also have privileged access to the
|
2724 denise.eckstein 1.1 system. Allowing a registered Provider’s executable to be
|
2725 kumpf 1.12 replaced with malicious code would result in a critical
|
2726 denise.eckstein 1.1 security defect, giving a malicious user privileged access
2727 to the system. Adminstrators are responsible for ensuring
2728 that only trusted Providers are loaded into providerDir.
2729 In order to simplify the management task associated with
2730 securing Provider executable, the value of providerDir can be
2731 fixed at build time (i.e., set to one or more fixed, well-known
2732 locations).<br>
2733 <b>Source Configuration File: </b>
2734 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2735 </ul>
|
2736 kumpf 1.12
|
2737 denise.eckstein 1.1 <h5>providerManagerDir</h5>
2738 <ul>
2739 <b>Description: </b>Specifies the name of the directory that
2740 contains the ProviderManager plugin libraries.<br>
2741 <b>Recommended Default Value (Development Build): </b>lib<br>
2742 <b>Recommended Default Value (Release Build): </b>
2743 $PROVIDERMANAGERDIRS<br>
2744 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2745 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2746 <b>Dynamic?: </b>No<br>
2747 <b>Considerations: </b>Should be a dedicated directory to
2748 minimize inspection of non-applicable files. Additionally,
2749 since all calls to the providers go through the provider
2750 managers, the same care should be taken with regards to
2751 security for the provider manager directory, as for provider
2752 directories.<br>
2753 <b>Source Configuration File: </b>
2754 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
|
2755 kumpf 1.12 </ul>
|
2756 denise.eckstein 1.1
2757 <h5>repositoryDir</h5>
2758 <ul>
|
2759 kumpf 1.12 <b>Description: </b>Specifies the name of the directory
|
2760 denise.eckstein 1.1 to be used for the OpenPegasus repository.<br>
2761 <b>Recommended Default Value (Development Build): </b>repository<br>
2762 <b>Recommended Default Value (Release Build): </b>
2763 $REPOSITORYDIR/repository<br>
2764 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2765 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2766 <b>Dynamic?: </b>No<br>
2767 <b>Considerations: </b><br>
2768 <b>Source Configuration File: </b>
2769 Pegasus/Config/FileSystemPropertyOwner.cpp<p><br>
2770 </ul>
2771
2772 <h5>repositoryIsDefaultInstanceProvider</h5>
2773 <ul>
|
2774 kumpf 1.12 <b>Description: </b>If true, the Repository functions
2775 as the Instance Provider for all classes for which there
2776 is not an explicitly registered Provider. This flag is
2777 also used to control the behavior of the repository when
|
2778 denise.eckstein 1.1 processing association operators.<br>
2779 <b>Recommended Default Value (Development Build): </b>true<br>
|
2780 kumpf 1.12 <b>Recommended Default Value (Release Build): </b>false<br>
|
2781 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2782 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
2783 <b>Dynamic?: </b>No<br>
2784 <b>Considerations: </b>This flag can be used to configure
2785 the CIM Server to allow the Repository to be used by CIM Clients
2786 and CIM Providers as a dynamic data store. The setting of this
|
2787 kumpf 1.12 flag will significantly affect CIM Server behavior as viewed
2788 by the CIM Client.<br>
2789
2790 The following issues should be considered when setting
|
2791 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=true:
2792
2793 <ul>
|
2794 kumpf 1.12 <li><b>Authorization.</b> The repository has no
|
2795 denise.eckstein 1.1 concept of which users (or components) are authorized to
2796 perform which operations.</li>
2797 <li><b>Appearance of instrumentation.</b> A client application
|
2798 kumpf 1.12 cannot determine whether instrumentation exists for a
2799 given CIM class. For example, imagine a client
2800 issues a CreateInstance operation on a Disk class
|
2801 denise.eckstein 1.1 for which no provider is registered.
2802 The instance will be stored in the repository, and
|
2803 kumpf 1.12 the client gets a "success" response. Does that mean a
|
2804 denise.eckstein 1.1 disk device has been created on the server? Even worse,
|
2805 kumpf 1.12 when another client issues an EnumerateInstances
|
2806 denise.eckstein 1.1 operation, the spurious Disk instance is returned.
2807 With repositoryIsDefaultInstanceProvider=false, the
|
2808 kumpf 1.12 CreateInstance operation above would have returned a
2809 NOT_SUPPORTED error.</li>
|
2810 denise.eckstein 1.1 <li><b>Potential for inconsistent data.</b> Using the
2811 repository as a data cache increases the probability
2812 that a client will see stale or incorrect data. A
|
2813 kumpf 1.12 provider can better control the correlation
|
2814 denise.eckstein 1.1 between the data returned and the current state of the
|
2815 kumpf 1.12 underlying managed resource (whether or not the provider
|
2816 denise.eckstein 1.1 caches the data).</li>
2817 </ul>
2818 <br>
|
2819 kumpf 1.12
2820 The following issues should be considered when setting
|
2821 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=false:
2822
2823 <ul>
2824 <li><b>Provider Availability.</b> Certain Providers have been
|
2825 kumpf 1.12 developed to use the Repository as a dynamic data store.
2826 These Providers are currently not supported on system
|
2827 denise.eckstein 1.1 where this flag is disabled. E.g., the Common Diagnostics
|
2828 kumpf 1.12 Model (CDM) Provider
|
2829 denise.eckstein 1.1 (http://developer.intel.com/design/servers/cdm/)
|
2830 kumpf 1.12 relies on use of the Repository to store instances
2831 of CIM_DiagnosticSetting. If this flag set to
2832 false, this Provider will not function correctly. Note
2833 that this feature is supported by other WBEM
|
2834 denise.eckstein 1.1 implementation. Therefore, disabling this feature
2835 can increase the cost of migrating existing Providers to
2836 OpenPegasus.</li>
|
2837 kumpf 1.12 </ul>
|
2838 denise.eckstein 1.1
|
2839 kumpf 1.12 <b>Source Configuration File: </b>
|
2840 denise.eckstein 1.1 Pegasus/Config/RepositoryPropertyOwner.cpp<br>
2841 </ul>
|
2842 kumpf 1.12
|
2843 denise.eckstein 1.1 <h5>shutdownTimeout</h5>
2844 <ul>
2845 <b>Description: </b>When a cimserver -s shutdown command is
2846 issued, specifies the maximum time in seconds for the CIM Server
2847 to complete outstanding CIM operation requests before shutting
2848 down; if the specified timeout period expires, the CIM Server
|
2849 kumpf 1.12 will shut down, even if there are still CIM operations in
|
2850 denise.eckstein 1.1 progress. Minimum value is 2 seconds.<br>
2851 <b>Recommended Default Value (Development Build): </b>10<br>
2852 <b>Recommended Default Value (Release Build): </b>10<br>
2853 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2854 <b>Recommend To Be Fixed/Hidden (Release Build):</b>No/No<br>
2855 <b>Dynamic?: </b>Yes<br>
2856 <b>Considerations: </b><br>
2857 <b>Source Configuration File: </b>
2858 Pegasus/Config/ShutdownPropertyOwner.cpp<br>
2859 </ul>
2860
2861 <h5>slp</h5>
2862 <ul>
2863 <b>Description: </b>When set to true, OpenPegasus activates
2864 an SLP SA and issues DMTF defined SLP advertisements to this SA
2865 on startup.<br>
2866 <b>Default Value: </b>false<br>
2867 <b>Recommended Default Value (Development Build): </b>false<br>
2868 <b>Recommended Default Value (Release Build): </b>false<br>
2869 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2870 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2871 denise.eckstein 1.1 <b>Dynamic?: </b>No<p> <br>
2872 <br>
2873 <table border="1" cellspacing="1" bordercolordark="#666666"
2874 bordercolorlight="#CCCCCC" width=531
2875 style='font-size=10.0pt;font-family:Arial' height="80">
2876 <tr>
2877 <th bgcolor="#CAE6CA" width="168" height="16">Platform</th>
2878 <th bgcolor="#CAE6CA" width=350 height="16">
2879 Source Configuration File</th>
2880 </tr>
2881 <tr align="center">
2882 <td width="168" height="14">Linux</td>
2883 <td align="left" width="350" height="14">
2884 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2885 </tr>
2886 <tr align="center">
2887 <td width="168" height="14">HP-UX</td>
2888 <td align="left" width="350" height="14">
2889 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2890 </tr>
2891 <tr align="center">
2892 denise.eckstein 1.1 <td width="168" height="16">OpenVMS</td>
2893 <td align="left" width="350" height="16">
2894 Pegasus/Config/DefaultPropertyTableVms.h</td>
2895 </tr>
2896 </table>
2897 </ul>
2898
2899 <h5>socketWriteTimeout</h5>
2900 <ul>
2901 <b>Description: </b>If the CIM Server receives an
2902 EWOULDBLOCK/EAGAIN error on a non-blocking write,
|
2903 kumpf 1.12 socketWriteTimeout defines the number of seconds the
2904 CIM Server will wait for the socket to get ready and resume
|
2905 denise.eckstein 1.1 writing data.<br>
2906 <b>Recommended Default Value (Development Build): </b>
2907 20 (seconds)<br>
2908 <b>Recommended Default Value (Release Build): </b>
2909 20 (seconds)<br>
2910 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2911 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2912 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
2913 <b>Considerations: </b>Any changes made to this config property
|
2914 kumpf 1.12 dynamically will apply to new CIM Server connections only
|
2915 kavita.gupta 1.11 keeping old already established connections unchanged.<br>
|
2916 denise.eckstein 1.1 <b>Source Configuration File: </b>
2917 Pegasus/Config/DefaultPropertyTable.h
2918 </ul>
2919
2920 <h5>sslCertificateFilePath</h5>
2921 <ul>
|
2922 kumpf 1.12 <b>Description: </b>Contains the CIM Server SSL
|
2923 denise.eckstein 1.1 Certificate.<br>
2924 <b>Recommended Default Value (Development Build): </b>
2925 server.pem<br>
2926 <b>Recommended Default Value (Release Build): </b>
2927 $CERTIFICATEDIR/server.pem"<br>
2928 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2929 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2930 <b>Dynamic?: </b>No<br>
2931 <b>Considerations: </b>For a more detailed look at SSL options
2932 and their ramifications, please see the SSL guidelines.<br>
2933 <b>Source Configuration File: </b>
2934 Pegasus/Config/SecurityPropertyOwner.cpp
2935 </ul>
2936
2937 <h5>sslClientVerificationMode</h5>
2938 <ul>
2939 <b>Description: </b>Describes the desired level of support
2940 for certificate-based authentication.
2941 <ul style="MARGIN-TOP: 0in" type="circle">
2942 <li>“<b>required</b>” – The server requires certificate-based
|
2943 kumpf 1.12 client authentication. A client MUST present a
|
2944 denise.eckstein 1.1 trusted certificate in order to access the CIM Server.
|
2945 kumpf 1.12 If the client fails to send a certificate or sends an
|
2946 denise.eckstein 1.1 untrusted certificate, the connection will be rejected.</li>
2947 <li>“<b>optional</b>” – The server supports, but does not
|
2948 kumpf 1.12 require, certificate-based client authentication. The
2949 server will request and attempt to validate a client
|
2950 denise.eckstein 1.1 certificate, however the connection will be accepted even
2951 if no certificate is sent or an untrusted certificate is
2952 sent. The server will then seek to authenticate the
2953 client via an authentication header.</li>
|
2954 kumpf 1.12 <li>“<b>disabled</b>” – The server does not support
|
2955 denise.eckstein 1.1 certificate-based client authentication.</li>
2956 </ul>
2957 <b>Recommended Default Value (Development Build): </b>
2958 disabled<br>
2959 <b>Recommended Default Value (Release Build): </b>
2960 disabled<br>
2961 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2962 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2963 <b>Dynamic?: </b>No<br>
2964 <b>Considerations: </b>(1) This property is only used if
2965 <b>enableHttpsConnection</b> is <b>"true"</b>.
2966 (2) If the platform does not support PEGASUS_LOCAL_DOMAIN_SOCKET,
2967 OpenPegasus attempts to use either HTTPS or
|
2968 kumpf 1.12 HTTP to establish a local connection (connectLocal).
|
2969 denise.eckstein 1.1 For platforms that do not support PEGASUS_LOCAL_DOMAIN_SOCKET,
|
2970 kumpf 1.12 Clients which use connectLocal, such as cimconfig -l -c,
|
2971 denise.eckstein 1.1 cimprovider -l -s and cimserver -s, will not work if the
2972 "sslClientVerificationMode" variable is set to
2973 "required" and HTTP is disabled. For these
|
2974 kumpf 1.12 platforms, the recommended course of action is to change the
|
2975 denise.eckstein 1.1 property value to "optional."<br>
2976 <b>Source Configuration File: </b>
2977 Pegasus/Config/SecurityPropertyOwner.cpp
2978 </ul>
2979
2980 <h5>sslKeyFilePath</h5>
2981 <ul>
2982 <b>Description: </b>Contains the private key for the CIM
2983 Server SSL Certificate.<br>
2984 <b>Recommended Default Value (Development Build): </b>
2985 file.pem<br>
2986 <b>Recommended Default Value (Release Build): </b>
2987 $CERTIFICATEDIR/file.pem<br>
2988 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2989 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2990 <b>Dynamic?: </b>No<br>
2991 <b>Considerations: </b>File should be readable only by the
2992 user the cimserver is running as and/or privileged users. The
2993 file should be writeable only by a privileged user.<br>
2994 <b>Source Configuration File: </b>
2995 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2996 denise.eckstein 1.1 </ul>
2997
2998 <h5>sslTrustStore</h5>
2999 <ul>
3000 <b>Description: </b>Specifies the location of the OpenSSL
|
3001 kumpf 1.12 truststore. Consistent with the OpenSSL implementation, a
|
3002 denise.eckstein 1.1 truststore can be either a file or directory. If the truststore
|
3003 kumpf 1.12 is a directory, all the certificates within the directory are
|
3004 denise.eckstein 1.1 considered trusted.<br>
3005 <b>Recommended Default Value (Development Build): </b>
3006 client.pem<br>
3007 <b>Recommended Default Value (Release Build): </b>
3008 $CERTIFICATEDIR/client.pem<br>
3009 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3010 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3011 <b>Dynamic?: </b>No<br>
3012 <b>Source Configuration File: </b>
3013 Pegsus/Config/SecurityPropertyOwner.cpp
3014 </ul>
3015
3016 <h5>sslTrustStoreUserName</h5>
3017 <ul>
3018 <b>Description: </b>Specifies the system user name to be
3019 associated with all certificate-based authenticated requests.<br>
3020 <b>Recommended Default Value (Development Build): </b>NONE<br>
3021 <b>Recommended Default Value (Release Build): </b>NONE<br>
3022 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3023 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3024 <b>Dynamic?: </b>No<br>
3025 denise.eckstein 1.1 <b>Considerations: </b>This property has no default; for
|
3026 kumpf 1.12 security reasons, the system administrator must explicitly
|
3027 denise.eckstein 1.1 specify this value. This feature allows a single user
3028 name to be specified. This user will be associated
3029 with all certificates in the truststore. In the future,
3030 OpenPegasus will allow a system administrator to associate a
3031 distinct user name with each certificate.<br>
3032 <b>Source Configuration File: </b>
3033 Pegsus/Config/SecurityPropertyOwner.cpp<br>
3034 </ul>
3035
3036 <h5>traceComponents</h5>
3037 <ul>
3038 <b>Description: </b>Defines the components to be traced.<br>
3039 <b>Default Value: </b>""<br>
3040 <b>Recommended Default Value (Development Build): </b>""<br>
3041 <b>Recommended Default Value (Release Build): </b>""<br>
3042 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3043 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3044 <b>Dynamic?: </b>Yes<br>
3045 <b>Source Configuration File: </b>
3046 Pegasus/Config/TracePropertyOwner.cpp<br>
3047 </ul>
3048 denise.eckstein 1.1
3049 <h5>traceFacility</h5>
3050 <ul>
|
3051 kumpf 1.12 <b>Description: </b>Defines the desired facility for trace
|
3052 denise.eckstein 1.1 messages. Valid values include: "File"
|
3053 marek 1.13.2.1 , "Log" and "Memory" .<br>
|
3054 denise.eckstein 1.1 <b>Default Value: </b>File<br>
3055 <b>Recommended Default Value (Development Build): </b>File<br>
3056 <b>Recommended Default Value (Release Build): </b>File<br>
3057 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3058 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3059 <b>Dynamic?: </b>Yes<br>
3060 <b>Case Sensitive?: </b>No<br>
3061 <b>Considerations: </b>If you specify "File",
|
3062 kumpf 1.12 trace messagesare written into the file specified by the
|
3063 denise.eckstein 1.1 configuration option traceFilePath. If you specify
|
3064 kumpf 1.12 "Log", trace messages are written to the
|
3065 marek 1.13.2.1 OpenPegasus Log. If you specify Memory, the trace messages
3066 are collected in a wrap-around memory buffer.
3067 If this memory is part of a dump the trace messages can be
3068 found by the eye-catcher "PEGASUSMEMTRACE" at
3069 the top of the memory buffer. The trace is in clear text and
3070 the last written message has the suffix "EOTRACE".<br>
|
3071 denise.eckstein 1.1 <b>Source Configuration File: </b>
3072 Pegasus/Config/TracePropertyOwner.cpp<br>
3073 </ul>
3074
3075 <h5>traceFilePath</h5>
3076 <ul>
3077 <b>Description: </b>Specifies the location of the
3078 OpenPegasus trace file.<br>
3079 <b>Default Value: </b>cimserver.trc<br>
3080 <b>Recommended Default Value (Development Build):</b>
3081 cimserver.trc<br>
3082 <b>Recommended Default Value (Release Build): </b>
3083 $TRACEDIR/cimserver.trc<br>
3084 <b>Recommend To Be Fixed/Hidden (Development Build):</b>No/No<br>
3085 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3086 <b>Dynamic?: </b>Yes<br>
3087 <b>Source Configuration File: </b>
3088 Pegasus/Config/TracePropertyOwner.cpp<br>
3089 </ul>
3090
3091 <h5>traceLevel</h5>
3092 denise.eckstein 1.1 <ul>
3093 <b>Description: </b></b>Defines the desired level of
3094 tracing. Valid values include: 0, 1, 2, 3, 4, 5.<br>
3095 <b>Default Value: </b>0<br>
3096 <b>Recommended Default Value (Development Build): </b>0<br>
3097 <b>Recommended Default Value (Release Build): </b>0<<br>
3098 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3099 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3100 <b>Dynamic?: </b>Yes<br>
3101 <b>Source Configuration File: </b>
3102 Pegasus/Config/TracePropertyOwner.cpp<br>
3103 </ul>
3104
|
3105 marek 1.13.2.1 <h5>traceMemoryBufferKbytes</h5>
3106 <ul>
3107 <b>Description: </b>Defines the size of the buffer for
3108 in memory tracing in kbytes ( 2<sup>10</sup> bytes ).
3109 Smallest value is 16.<br>
3110 <b>Default Value: </b>10240<br>
3111 <b>Recommended Default Value (Development Build): </b>10240<br>
3112 <b>Recommended Default Value (Release Build): </b>10240<br>
3113 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3114 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3115 <b>Dynamic?: </b>No<br>
3116 <b>Case Sensitive?: </b>No<br>
3117 <b>Considerations: </b>Is ignored if configuration
3118 property traceFacility is not set to Memory.<br>
3119 <b>Source Configuration File: </b>
3120 Pegasus/Config/TracePropertyOwner.cpp<br>
3121 </ul>
3122
|
3123 denise.eckstein 1.1 <h3>Configuration Constants</h3>
3124
3125 <h4>Definitions</h4>
3126
3127 <h5>static char CURRENT_CONFIG_FILE [] = </h5>
3128 <ul>
3129 <b>Description: </b>Default file name for the current
3130 configuration file.<br>
3131 <b>Recommended Default Value (Development Build):</b>
3132 cimserver_current.conf<br>
3133 <b>Recommended Default Value (Release Build): </b>
3134 $CONFIGDIR/cimserver_current.conf<br>
3135 <b>Dynamic?: </b>No <br>
3136 <br>
3137 <table border="1" cellspacing="1" bordercolordark="#666666"
3138 bordercolorlight="#CCCCCC" width=531
3139 style='font-size=10.0pt;font-family:Arial'>
3140 <tr>
3141 <th bgcolor="#CAE6CA" width="168">Platform</th>
3142 <th bgcolor="#CAE6CA" width=350>
3143 Source Configuration File</th>
3144 denise.eckstein 1.1 </tr>
3145 <tr align="center">
3146 <td width="168">Linux</td>
3147 <td align="left" width="350">
3148 Pegasus/Config/ConfigFileDirLinux.h</td>
3149 </tr>
3150 <tr align="center">
3151 <td width="168">HP-UX</td>
3152 <td align="left" width="350">ConfigFileDirHpux.h</td>
3153 </tr>
3154 <tr align="center">
3155 <td width="168">OpenVMS</td>
3156 <td align="left" width="350">
3157 Pegasus/Config/ConfigFileDirVms.h</td>
3158 </tr>
3159 </table>
3160 </ul>
3161
3162 <h5>static char PLANNED_CONFIG_FILE [] = </h5>
3163 <ul>
|
3164 kumpf 1.12 <b>Description: </b>Default file name for the planned
|
3165 denise.eckstein 1.1 configuration file.<br>
3166 <b>Recommended Default Value (Development Build): </b>
3167 cimserver_planned.conf<br>
3168 <b>Recommended Default Value (Release Build): </b>
3169 $CONFIGDIR/cimserver_planned.conf<br>
3170 <b>Dynamic?: </b>No<br>
3171 <br>
3172 <table border="1" cellspacing="1" bordercolordark="#666666"
3173 bordercolorlight="#CCCCCC" width=531
3174 style='font-size=10.0pt;font-family:Arial'>
3175 <tr>
3176 <th bgcolor="#CAE6CA" width="168">Platform</th>
3177 <th bgcolor="#CAE6CA" width=350>
3178 Source Configuration File</th>
3179 </tr>
3180 <tr align="center">
3181 <td width="168">Linux</td>
3182 <td align="left" width="350">
3183 Pegasus/Config/ConfigFileDirLinux.h</td>
3184 </tr>
3185 <tr align="center">
3186 denise.eckstein 1.1 <td width="168">HP-UX</td>
3187 <td align="left" width="350">
3188 Pegasus/Config/ConfigFileDirHpux.h</td>
3189 </tr>
3190 <tr align="center">
3191 <td width="168">OpenVMS</td>
3192 <td align="left" width="350">
3193 Pegasus/Config/ConfigFileDirVms.h</td>
3194 </tr>
3195 </table>
3196 </ul>
3197
3198 <h5>static char CIMSERVER_START_FILE [] = </h5>
3199 <ul>
3200 <b>Description: </b>This is for the default file name
3201 for the cimserver startup file containing the PID.<br>
3202 <b>Default Value: </b>/tmp/cimserver_start.conf<br>
3203 <b>Recommended Default Value (Development Build): </b>
3204 /tmp/cimserver_start.conf<br>
3205 <b>Recommended Default Value (Release Build): </b>
3206 $PIDFILE<br>
3207 denise.eckstein 1.1 <b>Dynamic?: </b>No<br>
3208 <br>
3209 <table border="1" cellspacing="1" bordercolordark="#666666"
3210 bordercolorlight="#CCCCCC" width=531
3211 style='font-size=10.0pt;font-family:Arial'>
3212 <tr>
3213 <th bgcolor="#CAE6CA" width="168">Platform</th>
3214 <th bgcolor="#CAE6CA" width=350>
3215 Source Configuration File</th>
3216 </tr>
3217 <tr align="center">
3218 <td width="168">Linux</td>
3219 <td align="left" width="350">
3220 Pegasus/Config/ConfigFileDirLinux.h</td>
3221 </tr>
3222 <tr align="center">
3223 <td width="168">HP-UX</td>
3224 <td align="left" width="350">
3225 Pegasus/Config/ConfigFileDirHpux.h</td>
3226 </tr>
3227 <tr align="center">
3228 denise.eckstein 1.1 <td width="168">OpenVMS</td>
3229 <td align="left" width="350">
3230 Pegasus/Config/ConfigFileDirVms.h</td>
3231 </tr>
3232 </table>
3233 </ul>
3234
3235 <h3>Configuration Macros</h3>
3236
3237 <h4>Definitions</h4>
3238
3239 <h5>PEGASUS_SSLCLIENT_CERTIFICATEFILE</h5>
3240 <ul>
3241 <b>Description: </b><br>
3242 <b>Recommended Default Value (Development Build): </b>client.pem<br>
3243 <b>Recommended Default Value (Release Build): </b>
3244 $CERTIFICATEDIR/client.pem<br>
3245 <b>Dynamic?: </b>No<br>
3246 <b>Source Configuration File: </b>
3247 Pegasus/Common/Constants.h<br>
3248 </ul>
3249 denise.eckstein 1.1
3250 <h5>PEGASUS_SSLCLIENT_RANDOMFILE</h5>
3251 <ul>
3252 <b>Description: </b>On platforms that do not support
|
3253 kumpf 1.12 /dev/random or /dev/urandom, OpenSSL will use this file to
3254 seed the PRNG (Pseudo-Random Number Generator). This
3255 PEGASUS_SSLCLIENT_RANDOMFILE defines the default CIM
|
3256 denise.eckstein 1.1 Client random file.<br>
3257 <b>Recommended Default Value (Development Build):</b>ssl.rnd<br>
3258 <b>Recommended Default Value (Release Build):</b>
3259 $RANDOMDIR/ssl.rnd<br>
3260 <b>Dynamic?: </b>No<br>
3261 <b>Considerations: </b>Use of this variable requires
|
3262 kumpf 1.12 PEGASUS_HAS_SSL to be set. CIM Client use of a
|
3263 denise.eckstein 1.1 shared random file is not recommended. On systems where
3264 /dev/random or /dev/urandom are not available, CIM Clients are
|
3265 kumpf 1.12 encouraged to generate a unique random file which
|
3266 denise.eckstein 1.1 contains sufficient entropy.<br>
3267 <b>Source Configuration File: </b>
3268 Pegasus/Common/Constants.h<br>
3269 </ul>
3270
3271 <h5>PEGASUS_SSLSERVER_RANDOMFILE</h5>
3272 <ul>
|
3273 kumpf 1.12 <b>Description: </b>On platforms that do not support
3274 /dev/random or /dev/urandom, OpenSSL will use this file
3275 to seed the PRNG (Pseudo-Random Number Generator). This
3276 PEGASUS_SSLSERVER_RANDOMFILE defines the CIM Server
|
3277 denise.eckstein 1.1 random file.<br>
3278 <b>Recommended Default Value (Development Build): </b>
3279 cimserver.rnd<br>
3280 <b>Recommended Default Value (Release Build): </b>
3281 $RANDOMDIR/cimserver.rnd<br>
3282 <b>Dynamic?: </b>No<br>
3283 <b>Considerations: </b>1)Use of this variable
3284 requires PEGASUS_HAS_SSL to be set.(2) On systems where
|
3285 kumpf 1.12 /dev/random or /dev/urandom are not available, CIM Server
3286 vendors need to be sure that the cimserver.rnd file
|
3287 denise.eckstein 1.1 contains sufficient entropy and is uniquely generated for
3288 each system.<br>
3289 <b>Source Configuration File: </b>
3290 Pegasus/Common/Constants.h<b><br>
3291 </ul>
3292
3293 <h5>PEGASUS_LOCAL_AUTH_DIR</h5>
3294 <ul>
3295 <b>Description:</b> </b>For local connections (i.e.,
|
3296 kumpf 1.12 connectLocal), OpenPegasus uses a file-based authentication
|
3297 denise.eckstein 1.1 mechanism.<br>
3298 <b>Recommended Default Value (Development Build): </b>/tmp<br>
3299 <b>Recommended Default Value (Release Build): </b>
3300 $LOCALAUTHDIR/localauth<br>
3301 <b>Dynamic?: </b>No<br>
3302 <b>Source Configuration File: </b>
3303 Pegasus/Common/Constants.h<br>
3304 </ul>
3305
3306 <h5>PEGASUS_LOCAL_DOMAIN_SOCKET_PATH</h5>
3307 <ul>
3308 <b>Description: </b><br>
3309 <b>Recommended Default Value (Development Build): </b>
3310 /tmp/cimxml.socket<br>
3311 <b>Recommended Default Value (Release Build): </b>
3312 $SOCKETDIR/cimxml.socket<br>
3313 <b>Dynamic?: </b>No<br>
3314 <b>Source Configuration File: </b>
3315 Pegasus/Common/Constants.h<br>
3316 </ul>
3317
3318 denise.eckstein 1.1 <hr>
|
3319 martin 1.13 <p>Licensed to The Open Group (TOG) under one or more contributor license
3320 agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
3321 this work for additional information regarding copyright ownership.
3322 Each contributor licenses this file to you under the OpenPegasus Open
3323 Source License; you may not use this file except in compliance with the
3324 License.</p>
3325 <p>Permission is hereby granted, free of charge, to any person obtaining a
3326 copy of this software and associated documentation files (the "Software"),
3327 to deal in the Software without restriction, including without limitation
3328 the rights to use, copy, modify, merge, publish, distribute, sublicense,
3329 and/or sell copies of the Software, and to permit persons to whom the
3330 Software is furnished to do so, subject to the following conditions:</p>
3331 <p>The above copyright notice and this permission notice shall be included
3332 in all copies or substantial portions of the Software.</p>
3333 <p>THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
3334 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
3335 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
3336 IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
3337 CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
3338 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
3339 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.</p>
|
3340 denise.eckstein 1.1 <hr>
3341 </body>
3342 </html>
|