1 denise.eckstein 1.1 <html>
2 <head>
|
3 kumpf 1.12 <link rel="stylesheet" href=
|
4 denise.eckstein 1.1 "http://www.opengroup.org/stylesheets/info1.css">
5 </head>
6
7 <body>
8 <hr>
9
10 <p align="center">
11 <b><font size="4">Recommended OpenPegasus Build and Configuration Options for Selected Platforms</font></b>
12 </p>
13
14 <hr>
15
16 <p><b>Abstract: </b>
17 This document defines a set of recommended options for building,
|
18 kumpf 1.12 testing and running OpenPegasus on a selected set of
|
19 denise.eckstein 1.1 platforms. In this version of the document, platform-specific configuration
20 information have been documented for the platforms described in the
21 "Documented Platforms" section of this document.
22 </p>
23
24 <p><b>Note 1: </b>
25 The recommendations defined in this document are not intended to document
26 the feature set included in any vendor's OpenPegasus-based product.
27 Rather, the purpose of this document is to provide input to vendors when
28 making product decisions.<BR>
29 </p>
30
31 <hr>
32
33 <h2>Definition of the Problem</h2>
34
35 <p>OpenPegasus supports a large number of build and runtime options.
36 Determining which options to use can be challenging. The purpose of this
37 document is to simplify the build, testing and administration of OpenPegasus
38 by providing a recommended, tested set of options.</p>
39
40 denise.eckstein 1.1 <h2>Documented Platforms</h2>
41
42 <p>Support for the OpenPegasus build and runtime options described in
|
43 kumpf 1.12 this document varies by platform. In this version of the
44 document, platform-specific configuration information has been included
|
45 denise.eckstein 1.1 for the platforms described in the following table. For all other
|
46 kumpf 1.12 platforms, please consult the OpenPegasus Platform Advocate for
|
47 denise.eckstein 1.1 additional information.</p>
48
49 <ul>
50 <table border="1" cellspacing="1" bordercolordark="#666666"
51 bordercolorlight="#CCCCCC" width=20%>
52 <tr>
53 <th bgcolor="#CAE6CA" align=center>Platform</th>
54 <th bgcolor="#CAE6CA" align=center>Status</th>
55 </tr>
56 <tr align="left">
57 <td>HPUX_IA64_ACC</td>
58 <td> </td>
59 </tr>
60 <tr align="left">
61 <td>HPUX_PARISC_ACC</td>
62 <td> </td>
63 </tr>
64 <tr align="left">
65 <td>LINUX_IA64_GNU</td>
66 <td> </td>
67 </tr>
68 denise.eckstein 1.1 <tr align="left">
69 <td>LINUX_IX86_GNU</td>
70 <td> </td>
71 </tr>
72 <tr align="left">
73 <td>LINUX_PPC64_GNU</td>
74 <td> </td>
75 </tr>
76 <tr align="left">
77 <td>LINUX_PPC_GNU</td>
78 <td> </td>
79 </tr>
80 <tr align="left">
81 <td>LINUX_XSCALE_GNU</td>
82 <td> </td>
83 </tr>
84 <tr align="left">
85 <td>LINUX_ZSERIES64_GNU</td>
86 <td> </td>
87 </tr>
88 <tr align="left">
89 denise.eckstein 1.1 <td>LINUX_ZSERIES_GNU</td>
90 <td> </td>
91 </tr>
92 <tr align="left">
93 <td>VMS_ALPHA_DECCXX</td>
94 <td> </td>
95 </tr>
96 <tr align="left">
97 <td>VMS_IA64_DECCXX</td>
98 <td> </td>
99 </tr>
100 </table>
101 </ul>
102
103 <h2>Proposed Solution</h2>
104
105 <h3>Security Considerations</h3>
106 <ol>
107 <li>
108 To avoid introducing security vulnerabilities, vendors must never
109 ship providers incompatible with the security assumptions used in
|
110 kumpf 1.12 their deployment.
111 For example, providers designed for a single-user deployment that
112 don't perform authorization must not be shipped with a CIM Server
113 that expects the providers to perform authorization. Note that
|
114 denise.eckstein 1.1 this authorization burden is considerably lighter if the provider
115 is registered as 'run as requestor' and if the CIM Server enables
116 that feature. See <a href=
117 "http://www.openpegasus.org/pp/uploads/40/7197/SecurityGuidePEP.htm">
118 PEP#223 - Security Coding Guidelines</a> for additional
119 details.
120 </li>
121 <li>
122 Vendors should ensure they configure the CIM Server consistently
123 with the security requirements of their deployment.
124 </li>
125 </ol>
126
127 <h3>Terminology Notes</h3>
128 <ol>
129 <li>
130 In this document, the term "Not Set" is used to indicate
131 that the a value for the environment variable has not been defined.
|
132 kumpf 1.12 "Set" is used to indicate that the value must be defined,
|
133 denise.eckstein 1.1 but the actual value of the variable is not checked.
134 </li>
135 </ol>
136
137 <h3>General Notes</h3>
138
139 <ol>
140 <li>
|
141 kumpf 1.12 Not all functionality described in this document has achieved
|
142 denise.eckstein 1.1 "Green"status, please refer to the
143 <a href="http://www.openpegasus.org/page.tpl?CALLER=index.tpl&ggid=799">
144 OpenPegasus Project Feature Status </a>page for information on
145 the maturity level of OpenPegasus features.
146 </li>
147 <li>
148 To encourage testing of new functionality, recommendations for the
149 Development Build may include features that are not yet recommended
150 for Release Builds.
151 </li>
152 </ol>
153
154 <h3>Environment Variable Settings for <u>Building</u> OpenPegasus</h3>
155
156 <h4>Definitions</h4>
157
158 <h5>ICU_INSTALL</h5>
159 <ul>
160 <b>Description: </b>When set, points to the directory containing
161 the <a href="%20http:/oss.software.ibm.com/icu"> ICU(International
|
162 kumpf 1.12 Components for Unicode)</a> installation. The 'include'
|
163 denise.eckstein 1.1 subdirectory is used to locate ICU header files at build time. The
164 'lib' subdirectory is used to locate ICU libraries at link
165 time.<br>
166 <b>Default Value: </b>Not Set<br>
167 <b>Recommended Value (Development Build): </b>Not Set<br>
168 <b>Recommended Value (Release Build): </b>Not Set<br>
169 <b>Required: </b>No. However, if PEGASUS_HAS_ICU is
170 set and ICU_INSTALL is not defined, the ICU libraries and header
171 files are expected to be installed in directories (e.g.,/usr/lib,
172 /usr/include) that are searched by default.<br>
173 <b>Considerations: </b>This environment variable is only used
174 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
175 additional details.
176 </ul>
177
178 <h5>ICU_NO_UPPERCASE_ROOT</h5>
179 <ul>
180 <b>Description: </b>If set, the messages in the root resource
181 bundle will NOT be capitalized. By default, the root resource
182 bundle is capitalized.<br>
183 <b>Default Value: </b>Not Set<br>
184 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>Not Set<br>
185 <b>Recommended Value (Release Build): </b>Not Set<br>
186 <b>Required: </b>No<br>
|
187 kumpf 1.12 <b>Considerations: </b>This environment variable is only used
188 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
|
189 denise.eckstein 1.1 additional details.
190 </ul>
191
192 <h5>ICU_ROOT_BUNDLE_LANG</h5>
193 <ul>
194 <b>Description: </b>If set, specifies the language
195 to be used to generate the root resource bundle. The
196 default value for ICU_ROOT_BUNDLE_LANG is _en.<br>
197 <b>Default Value: </b>_en<br>
198 <b>Recommended Value (Development Build): </b>No
199 Recommendation<br>
200 <b>Recommended Value (Release Build): </b>No Recommendation<br>
201 <b>Required: </b>No<br>
202 <b>Considerations: </b>This environment variable is
203 only used if PEGASUS_HAS_MESSAGES is set. Refer to
204 PEGASUS_HAS_MESSAGES for additional details.<br>
205 If set, resource bundles for the designated language must
206 exist for the following files:
207 <ul>
208 <li>pegasus/src/Pegasus/msg/Server/pegasusServer_en.txt</li>
209 <li>pegasus/src/Pegasus/msg/Listener/pegasusListener_en.txt</li>
210 denise.eckstein 1.1 </ul>
211 </ul>
212
213
214 <h5>OPENSSL_BIN</h5>
215 <ul>
216 <b>Description: </b>Specifies the location of the
217 OpenSSL <i>binary</i> directory. <br>
218 <b>Default Value: </b>Not Set<br>
219 <b>Recommended Value (Development Build): </b>
220 No Specific Recommendation<br>
221 <b>Recommended Value (Release Build): </b>
222 No Specific Recommendation<br>
223 <b>Required: </b>No. By default, the openssl binary is
224 expected to be installed in a directory that is searched by default
225 (e.g., /usr/bin). For platforms where this isn't true, the
226 OPENSSL_BIN environment variable may be used to define an
|
227 kumpf 1.12 alternative path. This environment variable is only used if
|
228 denise.eckstein 1.1 PEGASUS_HAS_SSL is set.
229 </ul>
230
231 <h5>OPENSSL_HOME</h5>
232 <ul>
233 <b>Description: </b>Specifies the location of the OpenSSL
234 SDK directory. This directory must contain the OpenSSL
235 <i>include</i> directory, $(OPENSSL_HOME)/include, and the OpenSSL
236 <i>library</i> directory, $(OPENSSL_HOME)/lib.<br>
237 <b>Default Value: </b>Not Set<br>
238 <b>Recommended Value (Development Build): </b>
239 No Specific Recommendation<br>
240 <b>Recommended Value (Release Build): </b>
241 No Specific Recommendation<br>
242 <b>Required: </b>Yes for Windows, if PEGASUS_HAS_SSL
243 is set. No for all other platforms. For AIX, the default
|
244 kumpf 1.12 value for OPENSSL_HOME is /usr/linux. For all other
|
245 denise.eckstein 1.1 platforms, the OpenSSL include files and libraries are expected
246 to be installed in directories that are searched by default (e.g.,
|
247 kumpf 1.12 /usr/bin, /usr/lib(64), and /usr/include).
|
248 denise.eckstein 1.1 For platforms where the default value is not correct, the
249 OPENSSL_HOME environment variable may be used to define an
250 alternative path (i.e., $(OPENSSL_HOME)/lib and
251 $(OPENSSL_HOME)/include). This environment variable
252 is only used if PEGASUS_HAS_SSL is set.
253 </ul>
254
255 <h5>PEGASUS_ALLOW_ABSOLUTEPATH_IN_PROVIDERMODULE</h5>
256 <ul>
257 <b>Description: </b>If set to true, a version of OpenPegasus
258 will be built that allows an absolute path to be specified as the
259 value of the Location property of PG_ProviderModule class.
260 Otherwise it does not allow the absolute path to be specified.<br>
261 <b>Default Value: </b>Not Set<br>
|
262 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
263 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
264 <b>Required: </b>No<p>
265 <b>Considerations: </b>To avoid introducing security
266 vulnerabilities, vendors should analyze their deployment
267 environments to understand the security implications of allowing
268 providers to be loaded from a dynamically changing set of
269 directories.<br>
270 </ul>
271
272 <h5>PEGASUS_CCOVER</h5>
273 <ul>
274 <b>Description: </b>This flag is currently only supported on
|
275 kumpf 1.12 HP-UX. It is enabled on the Nightly Build & Test system,
|
276 denise.eckstein 1.1 HP-UX_11iv3_Integrity_C-Cover. This system is
|
277 kumpf 1.12 used to generate the nightly BullseyeCoverage code coverage
|
278 denise.eckstein 1.1 metrics.<br>
279 <b>Default Value: </b>Not Set<br>
|
280 kumpf 1.12 <b>Recommended Value (Development Build): </b>Not Set<br>
|
281 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
282 <b>Required: </b>No<br>
|
283 kumpf 1.12 <b>Considerations: </b>This flag is only supported on HP-UX to enable
|
284 denise.eckstein 1.1 CCOVER for the NB&T system.<br>
285 </ul>
286
287 <h5>PEGASUS_CIM_SCHEMA</h5>
288 <ul>
289 <b>Description: </b>This variable is used internally by the
|
290 kumpf 1.12 OpenPegasus development team when upgrading the OpenPegasus build
|
291 denise.eckstein 1.1 environment to a new version of the CIM Schema.<br>
292 <b>Default Value: </b>CIM217<br>
293 <b>Recommended Value (Development Build): </b>
294 No Specific Recommendation<br>
295 <b>Recommended Value (Release Build): </b>
296 No Specific Recommendation<br>
297 <b>Required: </b>No <br>
|
298 kumpf 1.12 <b>Considerations:</b> Additional code changes may be required when
299 upgrading or downgrading the CIM Schema version.</p>
|
300 denise.eckstein 1.1 </ul>
301
302 <h5>PEGASUS_CLASS_CACHE_SIZE</h5>
303 <ul>
304 <b>Description: </b>This environment variable gives the size of
305 the class cache used by CIM repository. This variable defines the
306 size of the class cache (i.e., the maximum number of classes that
|
307 kumpf 1.12 may be included). If this variable is set to 0, class caching is
|
308 denise.eckstein 1.1 disabled.<br>
309 <b>Default Value: </b>8<br>
310 <b>Recommended Value (Development Build): </b>8<br>
311 <b>Recommended Value (Release Build): </b>8<br>
|
312 kumpf 1.12 <b>Required: </b>No </p>
|
313 denise.eckstein 1.1 </ul>
314
315 <h5>PEGASUS_DEBUG</h5>
316 <ul>
|
317 kumpf 1.12 <b>Description: </b>Builds a debug version of OpenPegasus.
318 Concurrently, this flag controls a) enabling compiler specific
319 debug flags and b) the inclusion of debug-specific
|
320 denise.eckstein 1.1 functionality.<br>
321 <b>Default Value: </b>Not Set<br>
322 <b>Recommended Value (Development Build): </b>Set<br>
323 <b>Recommended Value (Release Build): </b>Not Set<br>
324 <b>Required: </b>No
325 </ul>
326
327 <h5>PEGASUS_DEFAULT_USERCTXT_REQUESTOR</h5>
328 <ul>
329 <b>Description: </b> If set to true, the <i>Requestor</i> user
330 context is used for providers that do not specify a UserContext
331 value in their registration. Otherwise, the <i>Privileged</i> user
332 context value is used by default. <br>
333 <b>Default Value: </b>false<br>
334 <b>Recommended Value (Development Build): </b>false<br>
335 <b>Recommended Value (Release Build): </b>false<br>
336 <b>Required: </b>No
337 <b>Considerations:</b> Use of the <i>Requestor</i> default has
338 improved provider security characteristics. However, some providers
339 may not operate correctly when run in the <i>Requestor</i> user
340 context and setting this value to true may cause those providers to
341 denise.eckstein 1.1 fail. Providers that can run in the <i>Requestor</i>
342 user context are encouraged to explicitly set the UserContext value
343 in their registration rather than rely on the default setting
|
344 kumpf 1.12 default by this variable. Please refer to
|
345 denise.eckstein 1.1 SecurityGuidelinesForDevelopers.html. PEP 223 for a discussion
|
346 kumpf 1.12 of the rationale/advantages of running providers in the
|
347 denise.eckstein 1.1 <i>Requestor </i> user context. <b>Note:</b> This build
|
348 kumpf 1.12 variable is not meaningful if the Provider User Context feature is
349 disabled with the PEGASUS_DISABLE_PROV_USERCTXT
|
350 denise.eckstein 1.1 setting.
351 </ul>
352
353
354 <h5>PEGASUS_DEFAULT_ENABLE_OOP</h5>
355 <ul>
356 <b>Description: </b>When this variable is set to false, by
357 default, Providers are run in the cimserver process
|
358 kumpf 1.12 (forceProviderProcesses=false). If this value is set true,
|
359 denise.eckstein 1.1 Providers are run out-of-process by default.<br>
360 <b>Default Value: </b>true for HP-UX and Linux, false for
361 other platforms<br>
362 <b>Recommended Value (Development Build): </b>true (HP-UX,
363 Linux)<br>
364 <b>Recommended Value (Release Build): </b>true (HP-UX,
365 Linux)<br>
366 <b>Required: </b>No<br>
|
367 kumpf 1.12 <b>Considerations: </b>This environment variable can be used to
|
368 denise.eckstein 1.1 change the "hard-coded" default setting for the
369 forceProviderProcesses configuration value.
370 Refer to the definition of <b>forceProviderProcesses</b> for
371 additional information.
372 </ul>
373
374 <h5>PEGASUS_DEST_LIB_DIR</h5>
375 <ul>
376 <b>Description: </b>Specifies the location of OpenPegasus
377 shared libraries.<br>
378 <b>Default Value: </b>$(PEGASUS_HOME)/lib<br>
379 <b>Recommended Value (Development Build): </b>
380 $(PEGASUS_HOME)/lib<br>
381 <b>Recommended Value (Release Build): </b>
382 No Specific Recommendation <br>
383 <b>Required: </b>No<br>
384 <b>Considerations: </b>This variable is NOT is used to define
|
385 kumpf 1.12 the location of the Provider library directories.
|
386 denise.eckstein 1.1 Please refer to the providerDir configuration option for details
387 on defining the directories for the Provider libraries.
388 </ul>
389
390
391 <h5>PEGASUS_DISABLE_DEPRECATED_INTERFACES</h5>
392 <ul>
|
393 kumpf 1.12 <b>Description: </b>Removes deprecated symbol definitions
|
394 denise.eckstein 1.1 from OpenPegasus runtime libraries.<br>
395 <b>Default Value:</b> Not Set<br>
396 <b>Recommended Value (Development Build):</b> Not Set<br>
397 <b>Recommended Value (Release Build): </b>Not Set<br>
398 <b>Required: </b>No<br>
399 <b>Considerations: </b>If this option is set, the resulting
|
400 kumpf 1.12 OpenPegasus libraries will not be binary compatible with
401 clients and providers built using interface definitions from
|
402 denise.eckstein 1.1 prior releases. This option may be used to slightly reduce binary
403 footprint in an environment where compatibility is not required.<br>
404 </ul>
405
406 <h5>PEGASUS_DISABLE_INSTANCE_QUALIFIERS</h5>
407 <ul>
408 <b>Description: </b>In the CIM Infrastructure Specification,
409 version 2.3, the DMTF clarified that instance-level qualifiers are
410 not allowed. In Version 1.2 of the Specification CIM
411 Operations over HTTP, use of the IncludeQualifiers parameter has
412 been DEPRECATED.<br>
413 <b>Default Value:</b> Not Set<br>
414 <b>Recommended Value (Development Build):</b> Not Set<br>
415 <b>Recommended Value (Release Build): </b>Not Set<br>
416 <b>Required: </b>No<br>
417 <b>Considerations: </b>Existing CIM Clients may depend on
|
418 kumpf 1.12 qualifiers being returned in the response. In this case, the
419 PEGASUS_DISABLE_INSTANCE_QUALIFIERS should not be set.
|
420 denise.eckstein 1.1 If this flag is set, the value of the IncludeQualifiers parameter
421 passed on the GetInstance and EnumerateInstance operations is
|
422 kumpf 1.12 ignored and qualifiers are not returned.
|
423 denise.eckstein 1.1 Disabling the return of qualifiers as part of a CIM Instance will
424 improve performance.<br>
425 </ul>
426
427 <h5>PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET</h5>
428 <ul>
429 <b>Description: </b>Disables support for local (same-system)
430 connections over a Unix domain socket. If this option is NOT set,
|
431 kumpf 1.12 the CIM Server is built to allow connections to be established
|
432 denise.eckstein 1.1 using a domain socket rather than a TCP port.<br>
433 <b>Default Value: </b>Not Set <br>
434 <b>Recommended Value (Development Build): </b>Not Set<br>
435 <b>Recommended Value (Release Build): </b>Not Set<br>
436 <b>Required: </b>No<br>
437 <b>Considerations: </b>(1) In high-threat environments, a
438 customer may want to disable all ports or reduce the number of
|
439 kumpf 1.12 exposed network ports. Supporting a local connection mechanism
|
440 denise.eckstein 1.1 using Unix domain socket allows the CIM Server to continue to
441 receive and process requests from local CIM Clients. (2)
442 Enabling this option may result in lose of functionality when
443 sslClientVerificationMode = required. (3)The
444 "LOCAL_DOMAIN_SOCKET" functionality has not been
445 implemented for Windows or OpenVMS. Therefore, by
|
446 kumpf 1.12 default, this option is "Set" for Windows and OpenVMS
|
447 denise.eckstein 1.1 platforms.
448 </ul>
449
450 <h5>PEGASUS_DISABLE_PERFINST</h5>
451 <ul>
452 <b>Description: </b>Builds a version of OpenPegasus that
453 disables support for gathering performance data.<br>
454 <b>Default Value: </b>Not Set<br>
455 <b>Recommended Value (Development Build): </b>Not Set<br>
456 <b>Recommended Value (Release Build): </b>Set<br>
457 <b>Required: </b>No<br>
458 <b>Considerations: </b>The CIM_ObjectManager.GatherStatisticalData
459 property is used to control statistic gathering. Once enabled,
460 statistical data can be viewed by retrieving instances of the
461 CIM_StatisticalData class. Support for gathering performance
462 data requires PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
463 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
464 to false), then PEGASUS_DISABLE_PERFINST must be set to
465 true. If PEGASUS_DISABLE_PERFINST is not defined or set to
466 false and PEGASUS_ENABLE_INTEROP_PROVIDER is not set,
467 PEGASUS_ENABLE_INTEROP_PROVIDER will be automatically enabled.
468 denise.eckstein 1.1 </ul>
|
469 kumpf 1.12
|
470 denise.eckstein 1.1 <h5>PEGASUS_DISABLE_PRIVILEGED_TESTS</h5>
471 <ul>
472 <b>Description: </b>This variable is used only in the development
|
473 kumpf 1.12 environment to restrict the level of testing performed by default.
474 If set, tests that require the CIM Server to run in a privileged
475 mode will not be run. Setting this variable allows
|
476 denise.eckstein 1.1 developers, without privileged access, to successfully run a
477 subset of the OpenPegasus test suit. This variable does
478 not affect CIM Server functionality. It merely controls
479 the level of testing.<br>
480 <b>Default Value: </b>Not Set<br>
481 <b>Recommended Value (Development Build): </b>Not Set<br>
482 <b>Recommended Value (Release Build): </b>Not Used<br>
483 <b>Required: </b>No<br>
484 <b>Considerations: </b>Enabling this variable will significantly
|
485 kumpf 1.12 reduce the testing of security related features (e.g.,
|
486 denise.eckstein 1.1 authentication and authorization) and can affect testing in other
487 areas.
488 </ul>
489
490 <h5>PEGASUS_DISABLE_PROV_USERCTXT</h5>
491 <ul>
492 <b>Description: </b>Builds a version of OpenPegasus that
493 disables supports for the Provider User Context feature.
494 This feature allows a Provider to choose the user context in
495 which it is invoked, including the ability to run in the context of
496 the user requesting an operation.<br>
497 <b>Default Value: </b>Set for Windows and OpenVMS, Not Set
498 for all other platforms<br>
499 <b>Recommended Value (Development Build): </b>Set for Windows and
500 OpenVMS, Not Set for all other platforms<br>
501 <b>Recommended Value (Release Build): </b>Set for Windows and
502 OpenVMS, Not Set for all other platforms<br>
503 <b>Required: </b>No<br>
504 <b>Considerations: </b>The Provider User Context feature may be
505 disabled by compiling with the PEGASUS_DISABLE_PROV_USERCTXT flag
506 defined. In this case, the Provider Registration Manager rejects
507 denise.eckstein 1.1 provider registration requests that specify a UserContext property
508 value. The user context in which providers run is then unchanged by
|
509 kumpf 1.12 this enhancement. Some platforms, such as OS/400 and z/OS may
|
510 denise.eckstein 1.1 define the PEGASUS_DISABLE_PROV_USERCTXT as part of the platform
511 configuration, since these platforms already set the provider user
512 context on a per-thread basis. When the Provider User Context
513 feature is enabled, support for each of the User Context types may
|
514 kumpf 1.12 be disabled individually. Provider registration fails when an
|
515 denise.eckstein 1.1 unsupported UserContext value is specified. Please refer to
|
516 kumpf 1.12 SecurityGuidelinesForDevelopers.html / PEP 223 for a discussion of
517 the rationale/advantages of user context providers to many
|
518 denise.eckstein 1.1 platforms.<br>
519 </ul>
520
521 <h5>PEGASUS_EMANATE_INCLUDE_DIR</h5>
522 <ul>
523 <b>Description: </b>Specifies the location of the EMANATE
524 <i>include</i> directory. <br>
525 <b>Default Value: </b>Not Set<br>
526 <b>Recommended Value (Development Build): </b>
527 No Specific Recommendation<br>
528 <b>Recommended Value (Release Build): </b>
529 No Specific Recommendation<br>
530 <b>Required: </b>No. By default, the EMANATE include files
531 are expected to be installed in directories that are searched by
532 default (e.g., /usr/include). For platforms where this isn't true,
|
533 kumpf 1.12 the PEGASUS_EMANATE_INCLUDE_DIR environment variable may be used to
534 define an alternative path. This environment variable is only used
|
535 denise.eckstein 1.1 if PEGASUS_USE_EMANATE is set.<br>
|
536 kumpf 1.12 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
|
537 denise.eckstein 1.1 for additional details.<br>
538 </ul>
539
540 <h5>PEGASUS_EMANATE_LIB_DIR</h5>
541 <ul>
542 <b>Description: </b>Specifies the location of the EMANATE
543 <i>lib</i> directory. <br>
544 <b>Default Value: </b>Not Set<br>
545 <b>Recommended Value (Development Build): </b>
546 No Specific Recommendation<br>
547 <b>Recommended Value (Release Build): </b>
548 No Specific Recommendation<br>
|
549 kumpf 1.12 <b>Required: </b>No. By default, the EMANATE libraries are
550 expected to be installed in directories that are searched by
551 default (e.g., /usr/lib, /usr/lib64). For platforms where this
|
552 denise.eckstein 1.1 isn't true, the PEGASUS_EMANATE_LIB_DIR environment variable may
553 be used to define an alternative path. This environment variable
554 is only used if PEGASUS_USE_EMANATE is set.<br>
555 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
556 for additional details.<br>
557 </ul>
558
559 <h5>PEGASUS_ENABLE_AUDIT_LOGGER</h5>
560 <ul>
561 <b>Description: </b>When this variable is set to false, support
562 for audit logging will NOT be built into OpenPegasus. If this
563 variable is set to true, or not set, support for audit logging
564 will be included in the build. All other values are invalid.<br>
565 <b>Default Value: </b>true<br>
566 <b>Recommended Value (Development Build): </b>true<br>
567 <b>Recommended Value (Release Build): </b>true<br>
568 <b>Required: </b>No<br>
569 </ul>
570
571
572 <h5>PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER</h5>
573 denise.eckstein 1.1 <ul>
574 <b>Description: </b>If set to true, a version of OpenPegasus
575 that supports CMPI providers and their dependent components is
576 built. If this variable is not set or set to false, support
577 for CMPI providers will not be included. <br>
578 <b>Default Value: </b>true for Linux and OpenVMS, false for
579 other platforms<br>
|
580 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (Linux
|
581 denise.eckstein 1.1 Platform Only)<br>
582 <b>Recommended Value (Release Build): </b>true (Linux Platform
583 Only)<br>
584 <b>Required: </b>No</p>
585 </ul>
586
587 <h5>PEGASUS_ENABLE_COMPRESSED_REPOSITORY</h5>
588 <ul>
589 <b>Description: </b>If set the Repository Compression logic is
590 built and enabled and compressed and non compressed repositories
591 are supported. If not set then compressed repositories are not
592 supported.<br>
593 <b>Default Value: </b>Not Set<br>
594 <b>Recommended Value (Development Build): </b>Not Set<br>
595 <b>Recommended Value (Release Build): </b>Not Set<br>
596 <b>Required: </b>No<p>
|
597 kumpf 1.12 <b>Considerations: </b>See
|
598 denise.eckstein 1.1 pegasus/readme.compressed_repository</p>
599 </ul>
600
601
602 <h5>PEGASUS_ENABLE_CQL</h5>
603 <ul>
604 <b>Description: </b>When this variable is set to false, support
605 for Indication Subscription filters that have CQL as the language
606 is disabled. It does not remove CQL from the build.<br>
607 <b>Default Value:</b> Not Set<br>
608 <b>Recommended Value (Development Build):</b> Not Set<br>
609 <b>Recommended Value (Release Build):</b> false<br>
610 <b>Required: </b>No<br>
|
611 kumpf 1.12 <b>Considerations: </b>The DMTF CIM Query Language
612 Specification is Preliminary and subject to backward incompatible
613 changes.
|
614 denise.eckstein 1.1 </ul>
615
616 <h5>PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT</h5>
617 <ul>
618 <b>Description: </b>When this variable is set to true, support the
619 DMTF Indications Profile (DSP1054) is included in OpenPegasus.
620 If this variable is not set or set to false, support for the DMTF
621 Indications Profile will not be included.<br>
622 <b>Default Value:</b> Not Set<br>
623 <b>Recommended Value (Development Build):</b> Not Set<br>
624 <b>Recommended Value (Release Build):</b> Not Set<br>
625 <b>Required: </b>No<br>
626 <b>Considerations: </b>The implementation of this feature is
627 based on a preliminary version of the DMTF Indications Profile,
628 DSP1053, and subject to change. If this variable is enabled,
|
629 kumpf 1.12 two DMTF experimental class definitions, CIM_IndicationService and
630 CIM_IndicationServiceCapabilities, will be added to the
|
631 denise.eckstein 1.1 root/PG_InterOp namespace. Experimental class definitions are
632 subject to change.
|
633 kumpf 1.12 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT requires
|
634 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled.
635 If PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
636 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT to true, will also
637 enable PEGASUS_ENABLE_INTEROP_PROVIDER. If
638 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
639 to false), a build error will be generated.
640 </ul>
641
642 <h5>PEGASUS_ENABLE_EXECQUERY</h5>
643 <ul>
644 <b>Description: </b>When this environment variable is set,
|
645 kumpf 1.12 processing of ExecQuery operations is enabled. When not set,
|
646 denise.eckstein 1.1 ExecQuery operation requests get a NotSupported response. (Note:
647 The PEGASUS_ENABLE_EXECQUERY environment variable controls
648 the definition of the PEGASUS_DISABLE_EXECQUERY compile macro.) <br>
649 <b>Default Value: </b>Not Set<br>
650 <b>Recommended Value (Development Build): </b>Not Set<br>
651 <b>Recommended Value (Release Build): </b>Not Set<br>
652 <b>Required: </b>No
653 </ul>
654
655 <h5>PEGASUS_ENABLE_EMAIL_HANDLER</h5>
656 <ul>
657 <b>Description: </b> When this environment variable is set, an
|
658 kumpf 1.12 E-Mail Indication Handler is built as part of the OpenPegasus
659 build. The E-Mail Indication Handler can be used to
|
660 denise.eckstein 1.1 delivered CIM Indications to a designated e-mail address.<br>
661 <b>Default Value: </b>Not Set<br>
662 <b>Recommended Value (Development Build): </b>Not Set<br>
663 <b>Recommended Value (Release Build): </b>Not Set<br>
664 <b>Required: </b>No<br>
665 <b>Considerations: </b>If PEGASUS_ENABLE_EMAIL_HANDLER is
666 not set when OpenPegasus is built, a request to create an Email
667 Indication Handler instance will be rejected will the error
668 CIM_ERR_NOT_SUPPORTED.
669 </ul>
670
671 <h5>PEGASUS_ENABLE_GCOV</h5>
672 <ul>
673 <b>Description: </b>GCOV,
674 <a href="http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov">
675 http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov</a>, is a
676 code coverage utility. If PEGASUS_ENABLE_GCOV is set,
677 GCC will instrument the code to support analysis by GCOV.<br>
678 <b>Default Value: </b>Not Set<br>
679 <b>Recommended Value (Development Build): </b>
680 Not Set<br>
681 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
682 <b>Required: </b>No<br><b>Considerations: </b>
683 This flag is currently only supported with GCC on Linux.
684 <ul>
|
685 kumpf 1.12 Note: LCOV, <a href=
|
686 denise.eckstein 1.1 "http://ltp.sourceforge.net/coverage/lcov.php">
|
687 kumpf 1.12 http://ltp.sourceforge.net/coverage/lcov.php</a>, is a
|
688 denise.eckstein 1.1 graphical front-end extension for GCOV. It collects GCOV data
689 for multiple source files and creates HTML pages with coverage
|
690 kumpf 1.12 information. You can use the following steps to use LCOV to
|
691 denise.eckstein 1.1 analyze OpenPegasus GCOV data.
692 <ol>
693 <li>Set PEGASUS_ENABLE_GCOV = true.</li>
|
694 kumpf 1.12 <li>Build and test OpenPegasus (e.g.,
695 <i>make -f pegasus/TestMakefile build
|
696 denise.eckstein 1.1 alltests</i>).</li>
697 <li>For each source directory,
698 <ul>
699 <li>copy the .gcda and .gcno files from the object
|
700 kumpf 1.12 directory to the source directory (e.g.,
701 <i>cp build/obj/Pegasus/Common/*.gcda
|
702 denise.eckstein 1.1 src/Pegasus/Common/</i>);</li>
|
703 kumpf 1.12 <li>execute the <b>lcov</b> command
704 (e.g.,
|
705 denise.eckstein 1.1 <i>lcov --directory src/Pegasus/Common/ --capture
706 --output-file result.info</i>) to build the result.info
707 file; and finally,</li>
708 <li>use the <b>genhtml</b> command to generate the .html
709 output (e.g., <i>genhtml result.info</i>). The
710 top .html file is named index.html.</li>
711 </ul>
712 </ol>
713 </ul>
714 </ul>
|
715 kumpf 1.12
|
716 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INDICATION_COUNT</h5>
717 <ul>
|
718 kumpf 1.12 <b>Description: </b>If true, the CIM
|
719 denise.eckstein 1.1 Server will be built to count the number of CIM indications
720 generated by providers and matched with subscriptions. If false
721 or not set, indication statistic support will not be included.
722 <b>Default Value: </b>true<br>
723 <b>Recommended Value (Development Build): </b>true <br>
724 <b>Recommended Value (Release Build): </b>true <br>
725 <b>Required: </b>No <br>
726 <b>Considerations: </b>The number of CIM indications generated by
727 providers and matched with subscriptions is stored in hash tables
728 which causes memory usage to increase by 4 bytes for each
729 active subscription and by about 400 bytes for each active
730 indication provider.<br>
731 </ul>
732
|
733 mike 1.10 <h5>PEGASUS_ENABLE_PROTOCOL_INTERNAL_BINARY</h5>
|
734 mike 1.8 <ul>
735 <b>Description: </b>If true, OpenPegasus uses a faster binary
736 protocol between the CIM server and provider manager. If false,
737 OpenPegasus uses the older XML-based protocol instead.
738 <br>
739 <b>Default Value: </b>true<br>
740 <b>Recommended Value (Development Build): </b>true<br>
741 <b>Recommended Value (Release Build): </b>true<br>
742 <b>Required: </b>No<br>
743 <b>Considerations: </b>This option improves performance by optimizing the
|
744 kumpf 1.12 serialization and deserialization of messages between the server and
|
745 mike 1.10 out-of-process providers.
746 <br>
747 </ul>
748
749 <h5>PEGASUS_ENABLE_PROTOCOL_BINARY</h5>
750 <ul>
751 <b>Description: </b>If true, OpenPegasus uses a faster binary
|
752 kumpf 1.12 protocol between local clients (including the provider agent) and the
753 CIM server. If false, OpenPegasus uses the conventional XML-based protocol
|
754 mike 1.10 instead. See PEP#340 for more details.
755 <br>
756 <b>Default Value: </b>false<br>
757 <b>Recommended Value (Development Build): </b>false<br>
758 <b>Recommended Value (Release Build): </b>false<br>
759 <b>Required: </b>No<br>
760 <b>Considerations: </b>This option improves performance by using a faster
761 binary protocol between local clients and the CIM server.
|
762 mike 1.8 <br>
763 </ul>
764
|
765 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INTEROP_PROVIDER</h5>
766 <ul>
767 <b>Description: </b>If true, the OpenPegasus Interop Provider
768 will be build. If false or not set, the OpenPegasus Interop
769 Provider will not be built.<br>
770 <b>Default Value: </b>Not Set<br>
771 <b>Recommended Value (Development Build): </b>Not Set<br>
772 <b>Recommended Value (Release Build): </b>false<br>
773 <b>Required: </b>No <br>
774 <b>Considerations: </b> A number of features controlled by
775 OpenPegasus build options are dependent on the Interop
|
776 kumpf 1.12 Provider. Please refer to PEGASUS_ENABLE_SLP,
777 PEGASUS_DISABLE_PERFINST, and
|
778 denise.eckstein 1.1 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT for additional
779 details.<br>
780 </ul>
781
782 <h5>PEGASUS_ENABLE_IPV6</h5>
783 <ul>
784 <b>Description: </b>This variable can be used to specify
785 whether IPv6 support should be included in OpenPegasus.<br>
786 <b>Default Value: </b>true<br>
787 <b>Recommended Value (Development Build): </b>true<br>
788 <b>Recommended Value (Release Build): </b>true<br>
789 <b>Required: </b>No<br>
790 <b>Considerations: </b>When this variable is set to
791 'false', support for IPv6 socket APIs and structures is disabled,
|
792 kumpf 1.12 and the CIM Server will not accept connections to or from IPv6
|
793 denise.eckstein 1.1 network interfaces. When this variable is set to 'true', the
|
794 kumpf 1.12 newer IPv6 socket APIs and structures will be included when
795 OpenPegasus is built, so they must be supported on the build
796 platform. However, if IPv6 is not supported on the platform on
|
797 denise.eckstein 1.1 which an IPv6-enabled version of OpenPegasus is run, then the IPv6
798 feature will be disabled at run-time and only IPv4 connections
799 will be supported.
800 </ul>
801
802 <h5>PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER</h5>
803 <ul>
804 <b>Description: </b>If true, a version of OpenPegasus that
805 supports JMPI providers and their dependent components is built.
806 If false or not set, support for JMPI Providers is not included
807 in OpenPegasus. All other values are invalid.<br>
808 <b>Default Value: </b>false<br>
809 <b>Recommended Value (Development Build): </b>false<br>
810 <b>Recommended Value (Release Build): </b>false<br>
811 <b>Required: </b>No</p>
812 </ul>
813
814 <h5>PEGASUS_ENABLE_OBJECT_NORMALIZATION</h5>
815 <ul>
|
816 kumpf 1.12 <b>Description: </b>If set, builds in support so that objects
817 returned from provider instance operations can be validated.
|
818 denise.eckstein 1.1 The enableNormalization must also be set to 'true' (default)<br>
819 <b>Default Value: </b>Not Set<br>
820 <b>Recommended Value (Development Build): </b>Not Set<br>
821 <b>Recommended Value (Release Build): </b>Not Set<br>
822 <b>Required: </b>No <br>
823 <b>Considerations: </b>If PEGASUS_ENABLE_OBJECT_NORMALIZATION is
824 set, two new configuration options are defined: enableNormalization
825 and excludeModulesFromNormalization.
826 </ul>
827
828 <h5>PEGASUS_ENABLE_PRIVILEGE_SEPARATION</h5>
829 <ul>
830 <b>Description: </b>If true, a version of OpenPegasus that
831 enables the Privilege Separation feature is built. This feature
832 allows the CIM Server to run in a non-privileged user context and
|
833 kumpf 1.12 use a small executor process to perform privileged operations. If
834 false or not set, the Privilege Separate feature will not be
|
835 denise.eckstein 1.1 included.<br>
836 <b>Default Value: </b>false<br>
|
837 kumpf 1.12 <b>Recommended Value (Development Build): </b>true (HP-UX,
|
838 denise.eckstein 1.1 Linux)<br>
839 <b>Recommended Value (Release Build): </b>true (HP-UX,
840 Linux)<br>
841 <b>Required: </b>No<br>
842 <b>Considerations: </b> The Privilege Separation feature is
843 only supported on HP-UX and Linux platforms. The 'cimsrvr' user
844 must be defined on the system. If the umask setting in the
845 environment is not 0, PEGASUS_TMP must be set to a directory that
|
846 kumpf 1.12 is writable by the 'cimsrvr' user for the tests to run
|
847 denise.eckstein 1.1 successfully.
848 </ul>
849
850 <h5>PEGASUS_ENABLE_PROTOCOL_WSMAN</h5>
851 <ul>
852 <b>Description: </b>If true, a version of OpenPegasus is
853 built that accepts and processes WS-Management requests. This
|
854 kumpf 1.5 feature is initially limited to WS-Transfer and WS-Enumeration
855 operations. If false or not set, WS-Management support is not
856 built or included in any way.<br>
|
857 denise.eckstein 1.1 <b>Default Value: </b>false<br>
858 <b>Recommended Value (Development Build): </b>true<br>
859 <b>Recommended Value (Release Build): </b>false<br>
860 <b>Required: </b>No<br>
861 <b>Considerations: </b> The WS-Management standards are not
862 mature, and interoperability problems may arise. The WS-Management
|
863 kumpf 1.12 functionality may change in incompatible ways in subsequent
|
864 denise.eckstein 1.1 releases. Also note the known limitations specified in PEP 311.<br>
865 </ul>
866
867 <h5>PEGASUS_ENABLE_REMOTE_CMPI</h5>
868 <ul>
869 <b>Description: </b>If set, a version of OpenPegasus that
870 support Remote CMPI providers and their dependent components
871 is built.<br>
872 <b>Default Value: </b>Not Set<br>
873 <b>Recommended Value (Development Build): </b>Not Set<br>
874 <b>Recommended Value (Release Build): </b>Not Set<br>
875 <b>Required: </b>No</p>
876 </ul>
877
878 <h5>PEGASUS_ENABLE_SLP</h5>
879 <ul>
880 <b>Description: </b>This variable controls of the inclusion
881 of SLP functionality in the OpenPegasus build. When this
882 environment variable is set to 'true', SLP functionality will be
|
883 kumpf 1.12 included as part of the OpenPegasus build. If
|
884 denise.eckstein 1.1 this variable is set to 'false' or not set, the SLP functionality
885 will not be included. All other values are considered
886 invalid and will result in a build error
887 (e.g., "PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid,
888 must be true or false").<br>
889 <b>Default Value: </b>'true' for Windows; 'false' for all other
890 Platforms<br>
891 <b>Recommended Value (Development Build): </b>'true' for
892 Windows; 'false' for all other Platforms<br>
893 <b>Recommended Value (Release Build): </b><br>
894 <b>Required: </b>No<br>
895 <b>Considerations: </b>PEGASUS_ENABLE_SLP requires
896 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
|
897 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
|
898 denise.eckstein 1.1 PEGASUS_ENABLE_SLP to true, will also enable
|
899 kumpf 1.12 PEGASUS_ENABLE_INTEROP_PROVIDER. If
|
900 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled
901 (i.e., set to false), a build error will be generated.<br>
902 </ul>
903
904
905 <h5>PEGASUS_ENABLE_SORTED_DIFF</h5>
906 <ul>
|
907 kumpf 1.12 <b>Description: </b>This controls if the DIFFSORT function
908 is used rather than a simple DIFF of the test results files
909 to the static results file. Set to 'true' enables the sorted
910 diffs of results to static results files. Otherwise results
911 in regular diffs of results to static results files.
912 See OpenPegasus bug 2283 for background information concerning
|
913 denise.eckstein 1.1 this config variable. <br>
914 <b>Default Value: </b>true<br>
915 <b>Recommended Value (Development Build): </b>true<br>
916 <b>Recommended Value (Release Build): </b>true<br>
917 <b>Required: </b>No<p> </p>
918 </ul>
919
920 <h5>PEGASUS_ENABLE_SYSTEM_LOG_HANDER</h5>
921 <ul>
922 <b>Description: </b>When this environment variable is set, a
|
923 kumpf 1.12 SysLog Indication Handler is built as part of the OpenPegasus
924 build. The SysLog Indication Handler can be used to
|
925 denise.eckstein 1.1 delivered CIM Indications to the system log file.<br>
926 <b>Default Value: </b>Not Set<br>
927 <b>Recommended Value (Development Build): </b>Not Set<br>
928 <b>Recommended Value (Release Build): </b>Not Set<br>
929 <b>Required: </b>No<br>
|
930 kumpf 1.12 <b>Considerations: </b>If PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
|
931 denise.eckstein 1.1 is not set when OpenPegasus is built, a request to create a SysLog
|
932 kumpf 1.12 Indication Handler instance will be rejected with the error
|
933 denise.eckstein 1.1 CIM_ERR_NOT_SUPPORTED.<br>
934 </ul>
935
936 <h5>PEGASUS_ENABLE_SSLV2</h5>
937 <ul>
938 <b>Description: </b>By default, support for the SSLV2 protocol
|
939 kumpf 1.12 is disabled in OpenPegasus. The option can be used to build a
|
940 denise.eckstein 1.1 version of OpenPegasus that supports SSLV2. This variable affects
941 how SSL contexts are constructed for both the CIM Server and CIM
942 Clients.<br>
943 <b>Default Value: </b>Not Set<br>
944 <b>Recommended Value (Development Build): </b>Not Set<br>
945 <b>Recommended Value (Release Build): </b>Not Set<br>
946 <b>Required: </b>No<br>
947 <b>Considerations:</b> Unless SSLV2 is required for backward
948 compatibility, enabling this protocol is not recommended (SSLV3
949 or later is preferred).
950 </ul>
951
952 <h5>PEGASUS_ENABLE_USERGROUP_AUTHORIZATION</h5>
953 <ul>
|
954 kumpf 1.12 <b>Description: </b>Builds a version of OpenPegasus that
|
955 denise.eckstein 1.1 allows an administrator to restrict access to CIM operations
956 to members of a designated set of groups. Refer to the
957 <b>authorizedUserGroups</b>configuration option for additional
958 details.<br>
959 <b>Default Value: </b>Not Set<br>
960 <b>Recommended Value (Development Build): </b>Not Set<br>
961 <b>Recommended Value (Release Build): </b>Set<br>
962 <b>Required: </b>No<br>
963 </ul>
964
965 <h5>PEGASUS_EXTRA_C_FLAGS</h5>
966 <ul>
|
967 kumpf 1.12 <b>Description: </b>This environment variable allows a
968 developer to specify an additional set of flags to be included
|
969 denise.eckstein 1.1 on the C compile command line.<br>
970 <b>Default Value: </b>Not Set<br>
971 <b>Recommended Value (Development Build): </b>No Set<br>
972 <b>Recommended Value (Release Build): </b>Not Set<br>
973 <b>Required: </b>No
974 </ul>
975
976 <h5>PEGASUS_EXTRA_CXX_FLAGS</h5>
977 <ul>
|
978 kumpf 1.12 <b>Description: </b>This environment variable allows a
|
979 denise.eckstein 1.1 developer to specify an additional set of flags to be included
980 on the C++ compile command line.<br>
981 <b>Default Value: </b>Not Set<br>
982 <b>Recommended Value (Development Build): </b>Not Set<br>
983 <b>Recommended Value (Release Build): </b>Not Set<br>
984 <b>Required: </b>No
985 </ul>
986
987 <h5>PEGASUS_EXTRA_LIBRARY_LINK_FLAGS</h5>
988 <ul>
989 <b>Description: </b>This environment variable allows a
|
990 kumpf 1.12 developer to specify an additional set of flags to include on
|
991 denise.eckstein 1.1 the link command line used to build a library.<br>
992 <b>Default Value: </b>Not Set<br>
993 <b>Recommended Value (Development Build): </b>Not Set<br>
994 <b>Recommended Value (Release Build): </b>Not Set<br>
995 <b>Required: </b>No
996 </ul>
997
998 <h5>PEGASUS_EXTRA_LINK_FLAGS</h5>
999 <ul>
1000 <b>Description: </b>This environment variable allows a
1001 developer to specify an additional set of flags to be included
1002 on the link command line. These flags will be included on
1003 both library and program executable link command lines.<br>
1004 <b>Default Value: </b>Not Set<br>
1005 <b>Recommended Value (Development Build): </b>Not Set<br>
1006 <b>Recommended Value (Release Build): </b>Not Set<br>
1007 <b>Required: </b>No
|
1008 kumpf 1.12 <b>Considerations: </b>Refer to PEGASUS_EXTRA_LIBRARY_LINK_FLAGS and
|
1009 denise.eckstein 1.1 PEGASUS_EXTRA_PROGRAM_FLAGS to add flags specific to either a
1010 library or program link command line.<br>
1011 </ul>
1012
1013 <h5>PEGASUS_EXTRA_PROGRAM_LINK_FLAGS</h5>
1014 <ul>
1015 <b>Description: </b>This environment variable allows a
1016 developer to specify an additional set of flags to include on
1017 the link command line used to build an executable program.<br>
1018 <b>Recommended Value (Development Build): </b>Not Set<br>
1019 <b>Recommended Value (Release Build): </b>Not Set<br>
1020 <b>Required: </b>No
1021 </ul>
1022
1023 <h5>PEGASUS_HAS_MESSAGES</h5>
1024 <ul>
|
1025 kumpf 1.12 <b>Description: </b>When set (to anything) during the build,
1026 OpenPegasus compiles with localization support. The
1027 ICU (International Components for Unicode) variables,
1028 ICU_ROOT and ICU_INSTALL, indicate that the
1029 localization support is based on ICU. Only ICU is supported
|
1030 denise.eckstein 1.1 at this time.<br>
1031 <b>Default Value: </b>Not Set<br>
1032 <b>Recommended Value (Development Build): </b>Not Set<br>
1033 <b>Recommended Value (Release Build): </b>Not Set<br>
1034 <b>Required: </b>No<br>
1035 <b>Considerations: </b>If the PEGASUS_HAS_MESSAGES is not
1036 set, OpenPegasus is built without localization support. This
1037 means that all messages sent by the CIM Server and the CLIs are in
1038 English. ICU is an open source project at
1039 <a href="http://oss.software.ibm.com/icu">
|
1040 kumpf 1.12 http://oss.software.ibm.com/icu</a>.
|
1041 denise.eckstein 1.1 Only English translations are included with the OpenPegasus
1042 distribution. The OpenPegasus distribution does not provide
1043 translated messages. But, enabling for ICU would allow vendor to
1044 provide the translations. Refer to the OpenPegasus Release README
1045 for additional information regarding the use of ICU. Although, in
|
1046 kumpf 1.12 OpenPegasus 2.3.2, experience with localization support
1047 has been limited to a select set of platforms, wider platform
|
1048 denise.eckstein 1.1 adoption of this technology is planned for 2.5.<br>
1049 </ul>
1050
1051 <h5>PEGASUS_HAS_SSL</h5>
1052 <ul>
1053 <b>Description: </b>If set, a version of OpenPegasus that
1054 supports SSL (i.e., https) is built.<br>
1055 <b>Default Value: </b>Not Set<br>
1056 <b>Recommended Value (Development Build): </b>Set<br>
1057 <b>Recommended Value (Release Build): </b>Set<br>
1058 <b>Required: </b>No<br>
|
1059 kumpf 1.12 <b>Considerations: </b>Support for SSL in OpenPegasus is
1060 dependent on the OpenSSL software developed by the
|
1061 denise.eckstein 1.1 <a href="http://www.openssl.org/">
|
1062 kumpf 1.12 OpenSSL Project (http://www.openssl.org/)</a>.
|
1063 denise.eckstein 1.1
1064 If the PEGASUS_HAS_SSL variable is set, the variable OPENSSL_HOME
1065 must also be defined. The OPENSSL_HOME variable is used, by the
|
1066 kumpf 1.12 OpenPegasus build, to determine the location of the OpenSSL
|
1067 denise.eckstein 1.1 include files, libraries and binaries.
1068 </ul>
1069
1070 <h5>PEGASUS_HOME</h5>
1071 <ul>
1072 <b>Description: </b>Specifies the location of the
1073 OpenPegasus working directory. The OpenPegasus
|
1074 kumpf 1.12 build will use this directory as the default location
|
1075 denise.eckstein 1.1 for files generated during the build (e.g., binaries,
1076 libraries, objects).<br>
1077 <b>Default Value: </b>None<br>
1078 <b>Recommended Value (Development Build): </b>
1079 No Specific Recommendation<br>
1080 <b>Recommended Value (Release Build): </b>
1081 No Specific Recommendation<br>
1082 <b>Required: </b>Yes<br>
1083 <b>Considerations: </b>The error "PEGASUS_HOME
1084 environment variable undefined" is returned if the
|
1085 kumpf 1.12 PEGASUS_HOME environment variable is not set.
|
1086 denise.eckstein 1.1 This variable is also used during runtime. Refer to the section
1087 titled "Environment Variable Settings for Running OpenPegasus
1088 2.3.2 on Linux" for additional details.<br>
1089 </ul>
1090
1091 <h5>PEGASUS_INDICATIONS_Q_THRESHOLD</h5>
1092 <ul>
1093 <b>Description: </b>Controls if indications providers are stalled
1094 if the indications service queue is too large. It can be set
|
1095 kumpf 1.12 to any positive value. If not set providers are never
1096 stalled. This implies that the indications service
|
1097 denise.eckstein 1.1 queue may become as large as necessary to hold all the
|
1098 kumpf 1.12 indications generated. If set to any value then
|
1099 denise.eckstein 1.1 providers are stalled by forcing them to sleep when they
1100 try to deliver an indication and the indications service
1101 queue exceeds this value. They are resumed when the queue
1102 count falls 10 percent below this value. Stall and resume log
1103 entries are made to inform the administrator the condition has
1104 occurred.<br>
1105 <b>Default Value: </b>Not Set<br>
1106 <b>Recommended Value (Development Build): </b>Not Set<br>
1107 <b>Recommended Value (Release Build): </b>Not Set<br>
1108 <b>Required: </b>No<br>
1109 <b>Considerations: </b>Use of this setting may have
1110 unintended side-effects when using Out-of-Process Providers
1111 including delayed processing of CIM Operation Requests.
1112 </ul>
1113
1114 <h5>PEGASUS_MAX_THREADS_PER_SVC_QUEUE</h5>
1115 <ul>
1116 <b>Description: </b>Controls the maximum number of threads
1117 allowed per message service queue. It is allowed to range
1118 between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT (currently 5000)
|
1119 kumpf 1.12 as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
|
1120 denise.eckstein 1.1 If set to 0 (zero) the max threads per service queue is then
1121 set to MAX_THREADS_PER_SVC_QUEUE_LIMIT. If set larger than the
|
1122 kumpf 1.12 MAX_THREADS_PER_SVC_QUEUE_LIMIT it is set equal to
|
1123 denise.eckstein 1.1 MAX_THREADS_PER_SVC_QUEUE_LIMIT. There are no other limits on the
1124 total number of threads that can exist within the system at this
|
1125 kumpf 1.12 time. When the server starts there on the order of 10 to 20
1126 message service queues created dependent upon
|
1127 denise.eckstein 1.1 build options. <br>
1128 <b>Default Value: </b>5<br>
1129 <b>Recommended Value (Development Build): </b>5<br>
1130 <b>Recommended Value (Release Build): </b>5<br>
1131 <b>Required: </b>No<br>
1132 <b>Considerations: </b>This flag affects consumption of
1133 system resources. Not setting, or inappropriately setting
1134 this value, may cause the cimserver to hang or crash.<br>
1135 </ul>
1136
1137 <h5>PEGASUS_ROOT</h5>
1138 <ul>
1139 <b>Description: </b>Specifies the location of the directory
1140 that corresponds to "pegasus" source directory defined in the
|
1141 kumpf 1.12 OpenPegasus CVS source tree. This environment variable is
1142 used by the OpenPegasus build to locate the required build
1143 and source files (e.g., $(PEGASUS_ROOT)/mak and
1144 $(PEGASUS_ROOT)/src).<br>
|
1145 denise.eckstein 1.1 <b>Default Value: </b>None<br>
1146 <b>Recommended Value (Development Build): </b>
1147 No Specific Recommendation<br>
1148 <b>Recommended Value (Release Build): </b>
1149 No Specific Recommendation<br>
1150 <b>Required: </b>Yes<br>
1151 <b>Considerations: </b>The error "PEGASUS_ROOT environment
1152 variable undefined" is returned if the PEGASUS_ROOT
1153 environment variable is not set.
1154 </ul>
1155
1156
1157 <h5>PEGASUS_NET_SNMP_INCLUDE_DIR</h5>
1158 <ul>
1159 <b>Description: </b>Specifies the location of the NET-SNMP
1160 <i>include</i> directory. <br>
1161 <b>Default Value: </b>Not Set<br>
1162 <b>Recommended Value (Development Build): </b>
1163 No Specific Recommendation<br>
1164 <b>Recommended Value (Release Build): </b>
1165 No Specific Recommendation<br>
1166 denise.eckstein 1.1 <b>Required: </b>No. By default, the NET-SNMP include
1167 files are expected to be installed in directories that
1168 are searched by default (e.g., /usr/include). For platforms
|
1169 kumpf 1.12 where this isn't true, the PEGASUS_NET_SNMP_INCLUDE_DIR
|
1170 denise.eckstein 1.1 environment variable may be used to define an alternative path.
1171 This environment variable is only used if PEGASUS_USE_NET_SNMP
1172 is set.<br>
1173 </ul>
1174
1175 <h5>PEGASUS_NET_SNMP_LIB_DIR</h5>
1176 <ul>
1177 <b>Description: </b>Specifies the location of the NET-SNMP
1178 <i>lib </i>directory. <br>
1179 <b>Default Value: </b>Not Set<br>
1180 <b>Recommended Value (Development Build): </b>
1181 No Specific Recommendation<br>
1182 <b>Recommended Value (Release Build): </b>
1183 No Specific Recommendation<br>
1184 <b>Required: </b>No. By default, the NET-SNMP library is
|
1185 kumpf 1.12 expected to be installed in a directory that is searched by
1186 default (e.g., /usr/lib, /usr/lib64). For platforms where
|
1187 denise.eckstein 1.1 this isn't true, the PEGASUS_NET_SNMP_LIB_DIR environment
1188 variable may be used to define an alternative path. This
1189 environment variable is only used if PEGASUS_USE_NET_SNMP is set.
1190 </ul>
1191
1192
1193 <h5>PEGASUS_NOASSERTS</h5>
1194 <ul>
1195 <b>Description: </b>Defines the NDEBUG compilation macro, which
1196 causes the preprocessor to remove PEGASUS_ASSERT() statements.<br>
1197 <b>Default Value: </b>Not Set<br>
1198 <b>Recommended Value (Development Build): </b>Not Set<br>
1199 <b>Recommended Value (Release Build): </b>Set<br>
1200 <b>Required: </b>No<br>
1201 </ul>
1202
1203 <h5>PEGASUS_OPENSLP_HOME</h5>
1204 <ul>
|
1205 kumpf 1.12 <b>Description: </b>Specifies the location of the OpenSLP
|
1206 denise.eckstein 1.1 SDK directory. This directory must contain the OpenSLP
1207 <i>include</i> directory, $(PEGASUS_OPENSLP_HOME)/include,
1208 and the OpenSLP <i>library</i> directory,
1209 $(PEGASUS_OPENSLP_HOME)/lib.<br>
1210 <b>Default Value: </b>Not Set<br>
1211 <b>Recommended Value (Development Build): </b>
1212 No Specific Recommendation<br>
1213 <b>Recommended Value (Release Build): </b>
1214 No Specific Recommendation<br>
1215 <b>Required: </b>No. If not set, no additional include or
1216 library search paths will be included.
1217 <b>Considerations: </b>This value is not used if PEGASUS_USE_OPENSLP
1218 is not defined. <br>
1219 </ul>
1220
1221 <h5>PEGASUS_PAM_AUTHENTICATION</h5>
1222 <ul>
|
1223 kumpf 1.12 <b>Description: </b>Enables support for PAM-(Pluggable
|
1224 denise.eckstein 1.1 Authentication Modules) based authentication.<br>
1225 <b>Default Value: </b>Not Set<br>
1226 <b>Recommended Value (Development Build): </b>Set<br>
1227 <b>Recommended Value (Release Build): </b>Set<br>
1228 <b>Required: </b>No<br>
1229 <b>Considerations: </b>Support for PAM in OpenPegasus is
1230 dependent on platform support for PAM.<br>
1231 </ul>
1232
1233 <h5>PEGASUS_PLATFORM</h5>
1234 <ul>
1235 <b>Description: </b>Describes the target platform for the
|
1236 kumpf 1.12 build. The list of supported values for this variable
1237 is defined in pegasus/mak/config.mak. Please refer to
|
1238 denise.eckstein 1.1 that file for a complete list of valid PEGASUS_PLATFORM
1239 values. This document includes platform-specific configuration
|
1240 kumpf 1.12 data for only a subset of the supported platforms. The
|
1241 denise.eckstein 1.1 following table describes the platforms documented in
1242 this version of the document. <br>
1243 <b>Default Value: </b>None<p> </p>
1244 <table border="1" cellspacing="1" bordercolordark="#666666"
1245 bordercolorlight="#CCCCCC" width=542
1246 style='font-size=10.0pt;font-family:Arial'>
1247 <tr>
1248 <th bgcolor="#CAE6CA" width="190">Platform</th>
1249 <th bgcolor="#CAE6CA" width=351>Recommended Value <br>
1250 Development Build</th>
1251 <th bgcolor="#CAE6CA" width=338>Recommended Value <br>
1252 Release Build</th>
1253 </tr>
1254 <tr align="center">
1255 <td width="190" align="left">Linux IA32</td>
1256 <td width="351">LINUX_IX86_GNU</td>
1257 <td width="338">LINUX_IX86_GNU</td>
1258 </tr>
1259 <tr align="center">
1260 <td width="190" align="left">Linux IA64</td>
1261 <td width="351">LINUX_IA64_GNU</td>
1262 denise.eckstein 1.1 <td width="338">LINUX_IA64_GNU</td>
1263 </tr>
1264 <tr align="center">
1265 <td width="190" align="left">Linux X86_64</td>
1266 <td width="351">LINUX_X86_64_GNU</td>
1267 <td width="338">LINUX_X86_64_GNU</td>
1268 </tr>
1269 <tr align="center">
1270 <td width="190" align="left">HP-UX PA-RISC</td>
1271 <td width="351">HPUX_PARISC_ACC</td>
1272 <td width="338">HPUX_PARISC_ACC</td>
1273 </tr>
1274 <tr align="center">
1275 <td width="190" align="left">HP-UX IPF</td>
1276 <td width="351">HPUX_IA64_ACC</td>
1277 <td width="338">HPUX_IA64_ACC</td>
1278 </tr>
1279 <tr align="center">
1280 <td width="190" align="left">OpenVMS Alpha</td>
1281 <td width="351">VMS_ALPHA_DECCXX</td>
1282 <td width="338">VMS_ALPHA_DECCXX</td>
1283 denise.eckstein 1.1 </tr>
1284 <tr align="center">
1285 <td width="190" align="left">OpenVMS IA64</td>
1286 <td width="351">VMS_IA64_DECCXX</td>
1287 <td width="338"> VMS_IA64_DECCXX</td>
1288 </tr>
1289 </table>
1290 <br><br>
1291 <b>Required: </b>Yes<br>
|
1292 kumpf 1.12 <b>Considerations: </b>The error "PEGASUS_PLATFORM
1293 environment variable undefined." is returned if the
|
1294 denise.eckstein 1.1 PEGASUS_PLATFORM environment variable is not set.
1295 </ul>
1296
1297 <h5>PEGASUS_REMOVE_METHODTRACE</h5>
1298 <ul>
1299 <b>Description: </b>If true, the CIM Server is compiled without
1300 method enter and exit trace statements. Trace Level 5 will
1301 continue to be accepted as a valid trace level but, without the
1302 method enter and exit trace statements, it will be equivalent to
|
1303 kumpf 1.12 Trace Level 4. If PEGASUS_REMOVE_METHODTRACE is false or not set,
|
1304 denise.eckstein 1.1 method enter and exit trace statements are included. All
1305 other values are considered invalid and will result in a build
1306 error.<br>
1307 <b>Default Value: </b>Not Set<br>
1308 <b>Recommended Value (Development Build): </b>Not Set (The
1309 Considerations section gives guidance on when a different
1310 decision would be made.)<br>
1311 <b>Recommended Value (Release Build): </b>Not Set (The
1312 Considerations section gives guidance on when a different
1313 decision would be made.)<br>
1314 <b>Required: </b>No<br>
1315 <b>Considerations: </b>This option completely removes the
|
1316 kumpf 1.12 method enter/exit trace statements from the generated object code.
1317 It defines the PEG_METHOD_ENTER and PEG_METHOD_EXIT macros
|
1318 denise.eckstein 1.1 to null statements. This helps to keep static code size small
1319 but reduces the serviceability of the CIM server.<br>
1320 </ul>
1321
1322
1323 <h5>PEGASUS_REPOSITORY_MODE</h5>
1324 <ul>
1325 <b>Description: </b>This variable defines the default mode
1326 used to create repositories that are constructed as part of the
1327 automated build tests. It does not affect the runtime
1328 environment. Valid values include: XML (causes
1329 the repository to be built in XML mode); BIN (causes
|
1330 kumpf 1.12 the repository to be built in binary mode). Use cimconfig to
|
1331 denise.eckstein 1.1 modify the runtime environment.<br>
1332 <b>Default Value: </b>XML<br>
1333 <b>Recommended Value (Development Build): </b>XML<br>
1334 <b>Recommended Value (Release Build): </b>XML<br>
1335 <b>Required: </b>No<p> </p>
1336 </ul>
1337
|
1338 kumpf 1.2 <h5>PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES</h5>
1339 <ul>
1340 <b>Description: </b>This variable defines the default contents of a
1341 class definition in the repository store when a new repository is created.
1342 Specifically, when set to true, propagated elements are included in a
1343 class definition in the persistent store. The contents of a class
1344 definition returned from the repository interface is not affected by this
1345 option.<br>
1346 <b>Default Value: </b>false<br>
1347 <b>Recommended Value (Development Build): </b>false<br>
1348 <b>Recommended Value (Release Build): </b>false<br>
1349 <b>Required: </b>No<p> </p>
1350 <b>Considerations: </b>A repository which stores complete class
1351 definitions does not allow modifications to non-leaf classes or changes
1352 to a superclass designation. Complete classes use more storage space,
1353 often twice as much as local (incomplete) classes. Class retrieval may
1354 be more expensive when local classes are stored. No specific mechanism
1355 is available to change this setting in an existing repository.<br>
1356 </ul>
1357
|
1358 denise.eckstein 1.1 <h5>PEGASUS_SLP_REG_TIMEOUT</h5>
1359 <ul>
1360 <b>Description: </b>Most SLP implementations allow a lifetime
1361 value to be specified in the registration sent to the SLP SA or
1362 DA. The PEGASUS_SLP_REG_TIMEOUT build variable allows a lifetime
1363 (ie. timeout) value to be specified on the SLP registration, with
1364 a 're-registration' being sent to SLP at the same specified
1365 timeout interval. The purpose of this lifetime or timeout value
|
1366 kumpf 1.12 is to avoid the accumulation of stale service information
|
1367 denise.eckstein 1.1 in the SA or DA.<br>
1368 <b>Default Value: </b>Undefined<br>
1369 <b>Recommended Value (Development Build): </b>Undefined<br>
1370 <b>Recommended Value (Release Build): </b>Undefined<br>
1371 <b>Required: </b>No<p><b>Example: </b>
1372 PEGASUS_SLP_REG_TIME=1440 (ie. 24 hours or 1 day)<br>
1373 <b>Considerations: </b>(1) The OpenPegasus internal SLP
1374 implementation does not support timeout registrations. This
1375 build option is useful, for example, if PEGASUS_USE_OPENSLP is
|
1376 kumpf 1.12 defined. (2) Some SLP implementations may impose a
|
1377 denise.eckstein 1.1 maximum value for the lifetime parameter. For example, OpenSLP
|
1378 kumpf 1.12 limits this value to SLP_LIFETIME_MAXIMUM (or 0xFFFF), and
|
1379 denise.eckstein 1.1 if this maximum value is passed to OpenSLP, then the timeout
1380 feature is disabled. Refer to the documentation of your SLP
1381 implementation for more information. (3) OpenPegasus will not
|
1382 kumpf 1.12 do any validity checking on the specified value, either
|
1383 denise.eckstein 1.1 to determine if it is a valid positive integer or if it
1384 exceeds some maximum value.<br>
1385 </ul>
1386
1387 <h5>PEGASUS_SNIA_EXTENSIONS</h5>
1388 <ul>
1389 <b>Description: </b> This variable is used to enable a
1390 set of workarounds that support the use of OpenPegasus
1391 in the SNIA Test Environment.<br>
1392 <b>Default Value: </b>Not Set<br>
1393 <b>Recommended Value (Development Build): </b>Not Set<br>
1394 <b>Recommended Value (Release Build): </b>Not Set<br>
1395 <b>Required: </b>No<br>
1396 <b>Considerations: </b>The functionality enabled with this
1397 variable is experimental and subject to change.
1398 </ul>
1399
1400 <h5>PEGASUS_SKIP_MOST_TEST_DIRS</h5>
1401 <ul>
1402 <b>Description: </b>If set to true, this variable can be used
1403 to reduce the time required to build OpenPegasus by significantly
1404 denise.eckstein 1.1 reducing the number of tests that are built.<br>
1405 <b>Default Value: </b>Not Set<br>
1406 <b>Recommended Value (Development Build): </b>Not Set<br>
1407 <b>Recommended Value (Release Build): </b>Not Set<br>
1408 <b>Required: </b>No<br>
1409 <b>Considerations: </b>Setting this variable to true
1410 affects the behavior of all recursive make targets (e.g.,
1411 clean, depend, all, unittests, alltests, and slptests).
1412 Use of this variable with test-related targets (e.g., unittests,
|
1413 kumpf 1.12 alltests and slptests) can produce unexpected results.
|
1414 denise.eckstein 1.1 To avoid creating an inconsistent PEGASUS_HOME directory,
1415 the PEGASUS_HOME directory (i.e., the OpenPegasus build
1416 directory) should be removed prior to enabling or disabling
1417 this variable. This variable should not be used to characterize
|
1418 kumpf 1.12 the set of files to be packaged in a release build. Please
|
1419 denise.eckstein 1.1 refer to the Runtime Packaging Definition PEP for the release
|
1420 kumpf 1.12 for a recommended list of files to be included in a release.
|
1421 denise.eckstein 1.1 </ul>
1422
1423 <h5>PEGASUS_TEST_ENABLE_DEBUG_TRACE</h5>
1424 <ul>
1425 <b>Description: </b>
1426 This variable is only used for testing. If set to true,
|
1427 kumpf 1.12 Discarded data trace will be enabled by the install_run
1428 target of the src/Server/Makefile before running the
|
1429 denise.eckstein 1.1 OpenPegasus TestMakefile test suite. <br>
1430 <b>Default Value: </b>Not Set<br>
1431 <b>Recommended Value (Development Build): </b>Set<br>
1432 <b>Recommended Value (Release Build): </b>Not Set<br>
1433 <b>Required: </b>No<br>
1434 <b>Considerations: </b>
|
1435 kumpf 1.12 This variable is useful in certain test environments to
1436 explicitly enable tracing to aid in better troubleshooting and
|
1437 denise.eckstein 1.1 detection of test failures (E.g. Test systems are experiencing
|
1438 kumpf 1.12 test failures due to connection timeouts, lost indications
|
1439 denise.eckstein 1.1 etc).<br>
1440 </ul>
1441
1442 <h5>PEGASUS_TEST_ISGROUP_GROUP/PEGASUS_TEST_ISGROUP_USER_SUCCESS/PEGASUS_TEST_ISGROUP_USER_FAILURE</h5>
1443 <ul>
|
1444 kumpf 1.12 <b>Description: </b>These variables are only used for testing.
|
1445 denise.eckstein 1.1 These variables allow the developer to define a valid group name,
1446 PEGASUS_TEST_ISGROUP_GROUP, a valid user name that is in the
1447 group, PEGASUS_TEST_ISGROUP_USER_SUCCESS, and an a valid user
1448 name that is not in the group, PEGASUS_TEST_ISGROUP_USER_FAILURE.
|
1449 kumpf 1.12 These variables are only used for testing and NOT part of the
|
1450 denise.eckstein 1.1 release.<br>
|
1451 kumpf 1.12 <b>Default Value(Windows):</b>
|
1452 denise.eckstein 1.1 Administrator/Administrators/Guest<br>
1453 <b>Default Value(Non-Windows): </b>root/root/guest<br>
1454 <b>Recommended Value (Development Build): </b>
1455 No Recommendation<br>
1456 <b>Recommended Value (Release Build): </b>Not Used<br>
1457 <b>Required: </b>No
1458 </ul>
1459
1460 <h5>PEGASUS_TEST_IPV6</h5>
1461 <ul>
1462 <b>Description: </b>This variable is only used for
1463 testing. If set to true, the IPv6-specific tests will
|
1464 kumpf 1.12 be run as part of the "alltests" OpenPegasus
|
1465 denise.eckstein 1.1 TestMakefile test suite. If this variable is not set or set to
1466 false, the IPv6-specific tests will not be run. All
1467 other values are invalid.<br>
|
1468 kumpf 1.12 <b>Default Value: </b>If PEGASUS_TEST_IPV6 is not defined,
|
1469 denise.eckstein 1.1 PEGASUS_TEST_IPV6 is set to the value of PEGASUS_ENABLE_IPV6.<br>
1470 <b>Recommended Value (Development Build): </b>Set to the value
1471 of PEGASUS_ENABLE_IPV6<br>
1472 <b>Recommended Value (Release Build): </b>Not Used<br>
1473 <b>Required: </b>No<br>
|
1474 kumpf 1.12 <b>Considerations: </b>This variable is useful in certain
|
1475 denise.eckstein 1.1 test environments to explicitly disable running the IPv6
|
1476 kumpf 1.12 tests (e.g., when running an IPv6-enabled version of
|
1477 denise.eckstein 1.1 OpenPegasus on an an IPv4 system).<br>
1478 </ul>
1479
1480 <h5>PEGASUS_TEST_SDK</h5>
1481 <ul>
|
1482 kumpf 1.12 <b>Description: </b>This variable is only used for
|
1483 denise.eckstein 1.1 testing. It is used to control testing of the SDK
1484 sample providers and clients. If set, the setup, building and
|
1485 kumpf 1.12 testing of the SDK samples is enabled as part of the
|
1486 denise.eckstein 1.1 OpenPegasus automated build and test.<br>
1487 <b>Default Value: </b>Not Set<br>
1488 <b>Recommended Value (Development Build): </b>Set<br>
1489 <b>Recommended Value (Release Build): </b>Not Used<br>
1490 <b>Required: </b>No
1491 </ul>
1492
1493 <h5>PEGASUS_TEST_USER_DEFINED</h5>
1494 <ul>
1495 <b>Description: </b>This variable is only used for testing.
1496 If this variable is set, the tests will assume that the
1497 PEGASUS_TEST_USER_ID and PEGASUS_TEST_USER_PASS variables
|
1498 kumpf 1.12 defines a valid user/password pair and can be used for
|
1499 denise.eckstein 1.1 certificate-based authentication testing. These tests
|
1500 kumpf 1.12 also assumes that "invalidUser" is not a valid
|
1501 denise.eckstein 1.1 user.<br>
1502 <b>Default Value: </b>Not Set<br>
1503 <b>Recommended Value (Development Build): </b>Set<br>
1504 <b>Recommended Value (Release Build): </b>Not Used<br>
1505 <b>Required: </b>No
1506 </ul>
1507
1508 <h5>PEGASUS_TEST_USER_ID/PEGASUS_TEST_USER_PASS</h5>
1509 <ul>
1510 <b>Description: </b>These variables are only used for
1511 testing. These variables allow the developer to define a
1512 valid, non-privileged user name and password
1513 on the test system that can be used as part of the OpenPegasus
1514 automated test scripts to perform authentication and
1515 authorization testing. These variables are only used for
1516 testing and NOT part of the release.<br>
1517 <b>Default Value: </b>guest/guest<br>
1518 <b>Recommended Value (Development Build): </b>
1519 No Recommendation<br>
1520 <b>Recommended Value (Release Build): </b>Not Used<br>
1521 <b>Required: </b>No<br>
1522 denise.eckstein 1.1 </ul>
1523
1524 <h5>PEGASUS_TEST_VALGRIND_LOG_DIR</h5>
1525 <ul>
1526 <b>Description: </b>
1527 This variable is currently only supported on Linux. It may be
|
1528 kumpf 1.12 set to run regression tests under the
|
1529 denise.eckstein 1.1 <a href="http://www.valgrind.org/">Valgrind</a> memory
1530 checking tool. It must specify a directory for writing
1531 Valgrind log files. The file name format for a particular
1532 log is PEGASUS_TEST_VALGRIND_LOG_DIR/PROGRAM_NAME.pid.<br>
1533 <b>Default Value: </b>Not Set<br>
1534 <b>Recommended Value (Development Build): </b>Not Set<br>
1535 <b>Recommended Value (Release Build): </b>Not Set<br>
1536 <b>Required: </b>No<br>
1537 <b>Considerations: </b>This flag is only supported on Linux to
1538 enable running tests under Valgrind.<br>
1539 </ul>
1540
1541 <h5>PEGASUS_TMP</h5>
1542 <ul>
1543 <b>Description: </b>This variable is only used in a test
1544 environment. It can be used to define the directory that
1545 OpenPegasus test programs should use to store temporary files.<br>
1546 <b>Default Value: </b>"."<br>
1547 <b>Recommended Value (Development Build): </b>
1548 No Specific Recommendation<br>
1549 <b>Recommended Value (Release Build): </b>Not Used<br>
1550 denise.eckstein 1.1 <b>Required: </b>No<br>
1551 </ul>
1552
1553 <h5>PEGASUS_USE_DEBUG_BUILD_OPTIONS</h5>
1554 <ul>
1555 <b>Description: </b>The PEGASUS_DEBUG flag is used to control
1556 a variety of settings, including compile options, assertion
|
1557 kumpf 1.12 enablement, method definitions for testing, and diagnostic
|
1558 denise.eckstein 1.1 output. The PEGASUS_USE_DEBUG_BUILD_OPTIONS variable
|
1559 kumpf 1.12 can be used to enable just the compiler specific debug options
|
1560 denise.eckstein 1.1 (e.g., -g in g++) .<br>
1561 <b>Default Value: </b>Not Set<br>
1562 <b>Recommended Value (Development Build): </b>Set<br>
1563 <b>Recommended Value (Release Build): </b>Not Set<br>
1564 <b>Required: </b>No<br>
1565 <b>Considerations: </b>This variable is automatically set
1566 if PEGASUS_DEBUG is set.<br>
1567 </ul>
1568
1569 <h5>PEGASUS_USE_EMANATE</h5>
1570 <ul>
1571 <b>Description: </b>EMANATE,
1572 <a href="http://www.snmp.com/products/emanate.html">
|
1573 kumpf 1.12 http://www.snmp.com/products/emanate.html</a>, is an SNMP Research
1574 International product that supports SNMPv1, SNMPv2c, and
|
1575 denise.eckstein 1.1 SNMPv3. If the PEGASUS_USE_EMANATE variable is defined,
1576 the OpenPegasus SNMP Handler will use the EMANATE libraries
|
1577 kumpf 1.12 to send traps to the SNMP Management application.
|
1578 denise.eckstein 1.1 The EMANATE libraries are NOT included as part of OpenPegasus.<br>
1579 <b>Default Value: </b>Not Set<br>
1580 <b>Recommended Value (Development Build): </b>Not Set<br>
1581 <b>Recommended Value (Release Build): </b>Not Set<br>
1582 <b>Required: </b>No<p>
1583 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
|
1584 kumpf 1.12 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1585 denise.eckstein 1.1 Handler to be supported.<br>
1586 </ul>
1587
1588
1589 <h5>PEGASUS_USE_NET_SNMP</h5>
1590 <ul>
|
1591 kumpf 1.12 <b>Description: </b>NET-SNMP,
|
1592 denise.eckstein 1.1 <a href="http://net-snmp.sourceforge.net">
1593 http://net-snmp.sourceforge.net</a>, is an OSS
1594 implementation of a suite of applications used to implement
1595 <a href="http://www.ietf.org/rfc/rfc1157.txt">SNMP v1</a>,
1596 <a href="http://www.ietf.org/rfc/rfc1901.txt">SNMP v2c</a> and
1597 <a href="http://www.ietf.org/rfc/rfc2571.txt">SNMP v3</a> using
|
1598 kumpf 1.12 both IPv4 and IPv6. If the PEGASUS_USE_NET_SNMP
|
1599 denise.eckstein 1.1 variable is defined, the OpenPegasus SNMP Handler will use
1600 the NET-SNMP libraries to send traps to the SNMP Management
1601 application. The NET-SNMP libraries are NOT included
1602 as part of OpenPegasus.<br>
1603 <b>Default Value: </b>Not Set<br>
1604 <b>Recommended Value (Development Build): </b>Not Set<br>
|
1605 kumpf 1.12 <b>Recommended Value (Release Build): </b>true for Linux,
|
1606 denise.eckstein 1.1 false for all other platforms<br>
1607 <b>Required: </b>No<p>
|
1608 kumpf 1.12 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1609 PEGASUS_USE_EMANATE variable must be set for the SNMP
|
1610 denise.eckstein 1.1 Handler to be supported.<br>
1611 </ul>
1612
1613 <h5>PEGASUS_USE_OPENSLP</h5>
1614 <ul>
1615 <b>Description: </b>OpenSLP, <a href="http://www.openslp.org">
|
1616 kumpf 1.12 http://openslp.org</a>, is an open-source implementation of
|
1617 denise.eckstein 1.1 Service Location Protocol. If the PEGASUS_USE_OPENSLP variable
1618 is defined, OpenPegasus will be built to use the OpenSLP
1619 implementation of SLP instead of the internal OpenPegasus
1620 implementation of SLP. The OpenSLP libaries are NOT included
1621 as part of OpenPegasus.
1622 <b>Default Value: </b>Not Set<br>
1623 <b>Recommended Value (Development Build): </b>Not Set<br>
1624 <b>Recommended Value (Release Build): </b>Not Set<br>
1625 <b>Required: </b>No<br>
1626 <b>Considerations: </b>PEGASUS_ENABLE_SLP must be defined
1627 if this variable is set.
1628 </ul>
1629
1630 <h5>PEGASUS_USE_PAM_STANDALONE_PROC</h5>
1631 <ul>
1632 <b>Description: </b>Moves the processing of PAM requests from
1633 the CIM Server process to a separate process managed by the
1634 CIM Server.<br>
1635 <b>Default Value: </b>Not Set<br>
1636 <b>Recommended Value (Development Build): </b>Set<br>
1637 <b>Recommended Value (Release Build): </b>Set<br>
1638 denise.eckstein 1.1 <b>Required: </b>No<br>
1639 <b>Considerations: </b>If PAM Authentication is enabled,
1640 the PAM API is used, during the processing of each request, to
1641 authenticate the client. This level of use makes the CIM Server
1642 extremely sensitive to memory leaks in the PAM library. In
1643 addition, certain PAM modules are not thread-safe. If your
|
1644 kumpf 1.12 platform is experiencing problems with PAM Authentication,
|
1645 denise.eckstein 1.1 use of option may provide a work-around.
1646 PEGASUS_USE_PAM_STANDALONE_PROC requires
1647 PEGASUS_PAM_AUTHENTICATION to be set.<br>
1648 </ul>
1649
1650 <h5>PEGASUS_USE_RELEASE_CONFIG_OPTIONS</h5>
1651 <ul>
1652 <b>Description: </b>If set, OpenPegasus is built using
1653 the "Release Build" configuration options. By default,
|
1654 kumpf 1.12 OpenPegasus is built using the "Development Build"
|
1655 denise.eckstein 1.1 configuration options.<br>
1656 <b>Default Value: </b>Not Set<br>
1657 <b>Recommended Value (Development Build): </b>Not Set<br>
1658 <b>Recommended Value (Release Build): </b>Set<br>
1659 <b>Required: </b>No<br>
|
1660 kumpf 1.12 <b>Considerations: </b>(1)The
1661 PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a platform
|
1662 denise.eckstein 1.1 vendor to easily toggle between two sets of configurations
1663 options, a set of options tuned for the development/debug
1664 ("Development Build") environment and a set of options
1665 tuned for the production environment ("Release Build").
|
1666 kumpf 1.12 Refer the section titled "Configuration Properties" for
1667 additional detail. (2) For each configuration
|
1668 denise.eckstein 1.1 variable, the "Recommended Value (Release Build)"
|
1669 kumpf 1.12 value defines the recommended settings to use for a
1670 "Release Build". Please refer to the
|
1671 denise.eckstein 1.1 description of each variable for additional information.
1672 </ul>
1673
1674 <h5>PEGASUS_USE_RELEASE_DIRS</h5>
1675 <ul>
|
1676 kumpf 1.12 <b>Description: </b>If set, OpenPegasus is built using
1677 the "Release Build" directory definitions. By default,
1678 OpenPegasus is built using the "Development Build"
|
1679 denise.eckstein 1.1 directory definitions.<br>
1680 <b>Default Value: </b>Not Set<br>
1681 <b>Recommended Value (Development Build): </b>Not Set<br>
1682 <b>Recommended Value (Release Build): </b>Set<br>
1683 <b>Required: </b>No<br>
|
1684 kumpf 1.12 <b>Considerations: </b>
|
1685 denise.eckstein 1.1 The PEGASUS_USE_RELEASE_DIRS variable allows a platform
|
1686 kumpf 1.12 vendor to easily toggle between two sets of directory
1687 definitions, a set tuned for the development/debug
1688 ("Development Build") environment and a set tuned for the
1689 production environment ("Release Build"). Refer the section
|
1690 denise.eckstein 1.1 titled "Configuration Properties" for additional detail.<br>
1691 </ul>
1692
|
1693 kumpf 1.6 <h5>PEGASUS_USE_SQLITE_REPOSITORY</h5>
1694 <ul>
1695 <b>Description: </b>If true, new repository stores are created
1696 using a SQLite database. Existing file-based stores will continue
1697 to be recognized and operate seamlessly.<br>
1698 <b>Default Value: </b>false<br>
1699 <b>Recommended Value (Development Build): </b>true<br>
1700 <b>Recommended Value (Release Build): </b>true<br>
1701 <b>Required: </b>No<br>
1702 <b>Considerations: </b>If PEGASUS_USE_SQLITE_REPOSITORY is set to true
1703 and SQLite files are not installed in default search locations,
1704 SQLITE_HOME must also be configured.
1705 PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES may not be set to true when
1706 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1707 </ul>
1708
|
1709 denise.eckstein 1.1 <h5>PEGASUS_USE_SYSLOGS</h5>
1710 <ul>
1711 <b>Description: </b>If set, OpenPegasus will be built
1712 to send log messages to the system logger (syslog).
1713 Otherwise, log messages will be sent to OpenPegasus
1714 specific log files.<br>
1715 <b>Recommended Value (Development Build): </b>Set<br>
1716 <b>Recommended Value (Release Build): </b>Set<br>
1717 <b>Required: </b>No<br>
1718 <b>Considerations: </b>This variable is currently
1719 not implemented as an environment variable. To use
1720 the option -DPEGASUS_USE_SYSLOGS must
1721 be explicitly included in the appropriate platform
1722 makefile (pegasus/mak/platform_*.mak).</ul>
1723
1724 <h5>PEGASUS_WINDOWS_SDK_HOME</h5>
1725 <ul>
|
1726 kumpf 1.12 <b>Description: </b>This variable should be set to point
1727 to the Microsoft Platform SDK on Windows if using a compiler
|
1728 denise.eckstein 1.1 version < 1300 (i.e. VC6). If using VC7 or VC8, this flag
1729 does not need to be set, as the necessary libraries are already
1730 included.<br>
1731 <b>Recommended Value (Development Build): </b>
1732 No Specific Recommendation<br>
1733 <b>Recommended Value (Release Build): </b>
1734 No Specific Recommendation<br>
1735 <b>Required: </b>Yes, if building on Windows with a
1736 compiler version < 1300.<br>
1737 </ul>
1738
|
1739 kumpf 1.6 <h5>SQLITE_HOME</h5>
1740 <ul>
1741 <b>Description: </b>Specifies the location of the SQLite SDK directory.
1742 This directory must contain sqlite3.h in the $(SQLITE_HOME)/include
1743 directory, and libsqlite3 in the $(SQLITE_HOME)/lib directory.<br>
1744 <b>Default Value: </b>Not Set<br>
1745 <b>Recommended Value (Development Build): </b>
1746 No Specific Recommendation<br>
1747 <b>Recommended Value (Release Build): </b>
1748 No Specific Recommendation<br>
1749 <b>Required: </b>Yes, if PEGASUS_USE_SQLITE_REPOSITORY is set to true
1750 and the SQLite files are not installed in locations that are searched by
1751 default.<br>
1752 <b>Considerations: </b>This environment variable is only used if
1753 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1754 </ul>
1755
|
1756 denise.eckstein 1.1 <h4>Examples Building a Linux IA32 (#IA64) Development/Debug Version</h4>
1757 <ul>
1758 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
|
1759 kumpf 1.12 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
|
1760 denise.eckstein 1.1 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
|
1761 kumpf 1.12 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1762 export PEGASUS_PAM_AUTHENTICATION=true<br>
|
1763 denise.eckstein 1.1 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
|
1764 kumpf 1.12 export PEGASUS_HAS_SSL=yes<br>
|
1765 denise.eckstein 1.1 export PEGASUS_DEBUG=TRUE<br>
1766 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
|
1767 kumpf 1.12 export PEGASUS_USE_SYSLOGS=true<br>
|
1768 denise.eckstein 1.1 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1769 </ul>
1770
1771 <h4>Building a Linux IA32 (#IA64) Production Release Version</h4>
1772 <ul>
1773 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1774 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1775 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1776 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
|
1777 kumpf 1.12 export PEGASUS_DISABLE_CQL=true <br>
|
1778 denise.eckstein 1.1 export PEGASUS_PAM_AUTHENTICATION=true <br>
1779 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1780 export PEGASUS_HAS_SSL=yes<br>
1781 export PEGASUS_USE_RELEASE_CONFIG_OPTIONS=true<br>
|
1782 kumpf 1.12 export PEGASUS_USE_RELEASE_DIRS=true<br>
|
1783 denise.eckstein 1.1 export PEGASUS_NOASSERTS=true<br>
1784 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1785 export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true<br>
1786 export PEGASUS_USE_SYSLOGS=true<br>
1787 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1788 </ul>
1789
1790 <h3>Environment Variable Settings for <u>Running</u> OpenPegasus</h3>
1791
1792 <h4>Definitions</h4>
1793
1794 <h5>PEGASUS_HOME</h5>
1795 <ul>
|
1796 kumpf 1.12 <b>Description: </b>There are multiple options for
|
1797 denise.eckstein 1.1 configuring the location of OpenPegasus runtime
|
1798 kumpf 1.12 files (e.g., configuration files, libraries,
|
1799 denise.eckstein 1.1 repository, executables). If no other option is
1800 specified, OpenPegasus will attempt to use the value
1801 PEGASUS_HOME.<br>
1802 <b>Default Value: </b>"."<br>
1803 <b>Recommended Value (Development Build): </b>
1804 The same value defined at build time.<br>
1805 <b>Recommended Value (Release Build): </b>Not Set<br>
1806 <b>Required: </b>No<br>
1807 <b>Considerations: </b>Although this variable can be
1808 useful in a development environment use of this environment
1809 variable is not recommended in a production environment.
1810 Instead, the use of configuration properties to explicitly
1811 set the location of runtime files and directories is recommended.
1812 </ul>
1813
1814 <h5>PEGASUS_MSG_HOME</h5>
1815 <ul>
1816 <b>Description: </b>This value is not used by the CIM
1817 Server. The CIM Server uses the messageDir configuration
1818 parameter to locate the directory where the ICU resource bundles.
1819 However, CIM Client applications must rely on an alternative
1820 denise.eckstein 1.1 mechanism to locate this directory.<br>
|
1821 kumpf 1.12 <b>Default Value: </b>if $PEGASUS_HOME is set then
|
1822 denise.eckstein 1.1 "$PEGASUS_HOME/msg" else "."<br>
1823 <b>Recommended Value (Development Build): </b>$PEGASUS_HOME/msg<br>
1824 <b>Recommended Value (Release Build): </b>Not Set <br>
1825 <b>Required: </b>No<br>
1826 </ul>
1827
1828 <h3>Configuration Properties</h3>
1829
1830 <h4>Notation</h4>
1831
|
1832 kumpf 1.12 <p>This section describes the notation used to define the
|
1833 denise.eckstein 1.1 configuration properties.</p>
1834
1835 <ul>
1836
1837 <h5>Default Value</h5>
1838 The value of <i>Default Value</i> is the OpenPegasus
1839 default setting for this configuration option. This
1840 value is used if a platform-specific setting is not
|
1841 kumpf 1.12 defined.
|
1842 denise.eckstein 1.1
1843 <h5>Recommended Default Value</h5>
|
1844 kumpf 1.12 The PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a
1845 platform vendor to easily toggle between two sets of
|
1846 denise.eckstein 1.1 configurations options, a set of options tuned for the
|
1847 kumpf 1.12 development/debug ("Development Build") environment
|
1848 denise.eckstein 1.1 and a set of options tuned for the production environment
|
1849 kumpf 1.12 ("Release Build"). The value of
1850 <i>Recommended Value (Development Build)</i>
|
1851 denise.eckstein 1.1 is the recommended default value for use in a development/
|
1852 kumpf 1.12 debug environment. The value of
|
1853 denise.eckstein 1.1 <i>Recommended Value (Release Build)</i> is the recommended
|
1854 kumpf 1.12 default value for use in a production environment.
1855
|
1856 denise.eckstein 1.1 <h5>Recommend To Be Fixed/Hidden</h5>
1857 Configuration options can be defined as fixed or hidden.
1858 A "fix" configuration option is set at build time
|
1859 kumpf 1.12 and cannot be changed without rebuilding. "Fixed"
|
1860 denise.eckstein 1.1 configuration options are not displayed using the cimconfig
|
1861 kumpf 1.12 command. This feature can be used by vendors to limit
|
1862 denise.eckstein 1.1 OpenPegasus functionality and configurability.
|
1863 kumpf 1.12
1864 A "hidden" configuration option is an option that is
|
1865 denise.eckstein 1.1 configurable (i.e., "not fixed"), but not externally
1866 advertised using the cimconfig command. The "hidden"
1867 feature can be used to define "internal use only"
1868 configuration options.
|
1869 kumpf 1.12
|
1870 denise.eckstein 1.1 <h5>Dynamic?</h5>
1871 If yes, the value of the configuration option can be
1872 changed without stopping and restarting the CIM Server.
1873
1874 <h5>Directory Specifications</h5>
1875 <p>Note that the variables included in the following table
|
1876 kumpf 1.12 (e.g., $LOGDIR) are for documentation purposes only and
1877 have been defined to simplify the description of the
1878 configuration options. In particular,
|
1879 denise.eckstein 1.1 these variables DO NOT correspond to environment variables
|
1880 kumpf 1.12 implemented in the OpenPegasus code. Default values
1881 for the following variables are platform
|
1882 denise.eckstein 1.1 and vendor dependent and not documented in this document.</p>
1883
1884 <table border="1" cellspacing="1" bordercolordark="#666666"
1885 bordercolorlight="#CCCCCC" width=148
1886 style='font-size=10.0pt;font-family:Arial' height="228">
1887 <tr>
1888 <th bgcolor="#CAE6CA" width=1 height="16"> </th>
1889 </tr>
1890 <tr align="center">
1891 <td align="left" width="1" height="12">$LOGDIR</td>
1892 </tr>
1893 <tr align="center">
1894 <td align="left" width="1" height="14">$PROVIDERDIRS</td>
1895 </tr>
1896 <tr align="center">
1897 <td align="left" width="1" height="14">
1898 $PROVIDERMANAGERDIRS</td>
1899 </tr>
1900 <tr align="center">
1901 <td align="left" width="1" height="14">$REPOSITORYDIR </td>
1902 </tr>
1903 denise.eckstein 1.1 <tr align="center">
1904 <td align="left" width="1" height="14">$CERTIFICATEDIR
1905 </td>
1906 </tr>
1907 <tr align="center">
1908 <td align="left" width="1" height="14">$LOCALAUTHDIR</td>
1909 </tr>
1910 <tr align="center">
1911 <td align="left" width="1" height="14">$TRACEDIR</td>
1912 </tr>
1913 <tr align="center">
1914 <td align="left" width="1" height="14">$CONFIGDIR</td>
1915 </tr>
1916 <tr align="center">
1917 <td align="left" width="1" height="14">$PIDFILE</td>
1918 </tr>
1919 <tr align="center">
1920 <td align="left" width="1" height="14">$RANDOMDIR</td>
1921 </tr>
1922 <tr align="center">
1923 <td align="left" width="1" height="14">$SOCKETDIR</td>
1924 denise.eckstein 1.1 </tr>
1925 <tr align="center">
1926 <td align="left" width="1" height="14">$MESSAGEDIR</td>
1927 </tr>
1928 </table>
|
1929 kumpf 1.12 </ul>
|
1930 denise.eckstein 1.1
1931 <h4>Definitions</h4>
1932
1933 <h5>authorizedUserGroups</h5>
1934 <ul>
|
1935 kumpf 1.12 <b>Description:</b> If the <b>authorizedUserGroups</b>
|
1936 denise.eckstein 1.1 property is set, the value is interpreted as a list of
1937 comma-separated user groups whose members may issue CIM
1938 requests. A user who is not a member of any of these groups is
1939 restricted from issuing CIM requests, with the exception of
1940 privileged users (root user). If the <b>authorizedUserGroups</b>
1941 property is not set, any user may issue CIM requests.<br>
1942 <b>Default Value: </b>blank<br>
1943 <b>Recommended Default Value (Development Build): </b>blank<br>
1944 <b>Recommended Default Value (Release Build): </b>blank<br>
1945 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1946 No/No<br>
1947 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
1948 <b>Dynamic?: </b>No<br>
1949 <b>Example: </b>
1950 #cimconfig -s authorizedUserGroups=users,systemusers -p<br>
1951 <b>Considerations: </b>This feature is available only when
1952 the OpenPegasus source is compiled with the flag
1953 PEGASUS_ENABLE_USERGROUP_AUTHORIZATION set.
1954 </ul>
1955
1956 <h5>daemon</h5>
1957 denise.eckstein 1.1 <ul>
1958 <b>Description: </b>This option enables/disables forking of
1959 the code to create a background daemon process.<br>
1960 <b>Default Value: </b>true<br>
1961 <b>Recommended Default Value (Development Build): </b>true<br>
1962 <b>Recommended Default Value (Release Build): </b>true<br>
1963 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1964 No/No<br>
1965 <b>Recommend To Be Fixed/Hidden (Release Build): </b>
1966 No/Yes<br>
1967 <b>Dynamic?: </b>No<p> <br>
1968 <br>
1969 <table border="1" cellspacing="1" bordercolordark="#666666"
1970 bordercolorlight="#CCCCCC" width=531
1971 style='font-size=10.0pt;font-family:Arial'>
1972 <tr>
1973 <th bgcolor="#CAE6CA" width="168">Platform</th>
1974 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
1975 </tr>
1976 <tr align="center">
1977 <td width="168">Linux</td>
1978 denise.eckstein 1.1 <td align="left" width="350">
1979 Pegasus/Config/DefaultPropertyTableLinux.h</td>
1980 </tr>
1981 <tr align="center">
1982 <td width="168">HP-UX</td>
1983 <td align="left" width="350">
1984 Pegasus/Config/DefaultPropertyTableHpux.h</td>
1985 </tr>
1986 <tr align="center">
1987 <td width="168">OpenVMS</td>
1988 <td align="left" width="350">
1989 Pegasus/Config/DefaultPropertyTableVms.h</td>
1990 </tr>
1991 </table>
1992 </ul>
1993
1994 <h5>enableAssociationTraversal</h5>
1995 <ul>
1996 <b>Description: </b>If true, the CIM Server will support
|
1997 kumpf 1.12 the four association traversal operators: Associators,
|
1998 denise.eckstein 1.1 AssociatorNames,References, and ReferenceNames.<br>
1999 <b>Default Value: </b>true<br>
2000 <b>Recommended Default Value (Development Build): </b>true<br>
2001 <b>Recommended Default Value (Release Build): </b>true<br>
2002 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2003 No/No<br>
2004 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2005 <b>Dynamic?: </b>No<br>
|
2006 kumpf 1.12 <b>Considerations: </b>There is still an outstanding
|
2007 denise.eckstein 1.1 Provider Registration issue that restricts the degree to
2008 which separate Providers can register for Associations.<br>
2009 <br>
2010 <table border="1" cellspacing="1" bordercolordark="#666666"
2011 bordercolorlight="#CCCCCC" width=531
2012 style='font-size=10.0pt;font-family:Arial'>
2013 <tr>
2014 <th bgcolor="#CAE6CA" width="168">Platform</th>
2015 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2016 </tr>
2017 <tr align="center">
2018 <td width="168">Linux</td>
2019 <td align="left" width="350">
2020 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2021 </tr>
2022 <tr align="center">
2023 <td width="168">HP-UX</td>
2024 <td align="left" width="350">
2025 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2026 </tr>
2027 <tr align="center">
2028 denise.eckstein 1.1 <td width="168">OpenVMS</td>
2029 <td align="left" width="350">
2030 Pegasus/Config/DefaultPropertyTableVms.h</td>
2031 </tr>
2032 </table>
2033 </ul>
2034
2035 <h5>enableAuditLog</h5>
2036 <ul>
|
2037 kumpf 1.12 <b>Description: </b>Used to enable or disable audit
|
2038 denise.eckstein 1.1 logging at run time. If true, audit logging will be enabled.<br>
2039 <b>Recommended Default Value (Development Build): </b>false<br>
2040 <b>Recommended Default Value (Release Build): </b>false<br>
2041 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2042 No/No<br>
2043 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2044 <b>Dynamic?: </b>Yes<br>
2045 <b>Source Configuration File: </b>
2046 Pegasus/Config/DefaultPropertyTable.h<br>
2047 </ul>
2048
2049 <h5>enableAuthentication</h5>
2050 <ul>
2051 <b>Description: </b>If true, a Client must be authenticated
2052 to access the CIM Server.<br>
2053 <b>Recommended Default Value (Development Build): </b>false<br>
2054 <b>Recommended Default Value (Release Build): </b>true<br>
2055 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2056 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2057 <b>Dynamic?: </b>No<br>
2058 <b>Source Configuration File: </b>
2059 denise.eckstein 1.1 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2060 </ul>
2061
2062 <h5>enableBinaryRepository</h5>
2063 <ul>
2064 <b>Description: </b>Setting this to true will activate the
2065 binary repository support on the next restart of cimserver.<br>
2066 <b>Recommended Default Value (Development Build): </b>false<br>
2067 <b>Recommended Default Value (Release Build): </b>false<br>
2068 <b>Recommend To Be Fixed/Hidden (Development Build): </b>Yes<br>
2069 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2070 <b>Dynamic?: </b>No<br>
2071 <b>Considerations: </b>Repositories containing a mixture
2072 of binary and XML objects are supported.<br>
2073 <b>Source Configuration File: </b>
2074 Pegasus/Config/RepositoryPropertyOwner.cpp</p>
2075 </ul>
2076
2077
2078 <h5>enableHttpConnection</h5>
2079 <ul>
2080 denise.eckstein 1.1 <b>Description: </b>If true, allows connections to
2081 the CIM Server using the HTTP protocol<br>
2082 <b>Default Value: </b>true<br>
2083 <b>Recommended Default Value (Development Build): </b>true<br>
2084 <b>Recommended Default Value (Release Build): </b>false<br>
2085 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2086 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2087 <b>Dynamic?: </b>No<br>
2088 <b>Considerations: </b>
|
2089 kumpf 1.12 Enabling HTTP will allow clients to connect with security
2090 properties different than those associated with encrypted SSL
|
2091 denise.eckstein 1.1 traffic, and its configured SSL authentication or other security
2092 behavior. This option should only be enabled in environments
2093 where sending the HTTP Request and HTTP Response as
2094 clear text messages does not introduce a security risk.
|
2095 kumpf 1.12 Note that if authentication is enabled (enableAuthentication),
2096 user names and passwords will be included in the text of the
|
2097 denise.eckstein 1.1 HTTP message.<br>
2098 <br>
2099 <table border="1" cellspacing="1" bordercolordark="#666666"
2100 bordercolorlight="#CCCCCC" width=531
2101 style='font-size=10.0pt;font-family:Arial'>
2102 <tr>
2103 <th bgcolor="#CAE6CA" width="168">Platform</th>
2104 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2105 </tr>
2106 <tr align="center">
2107 <td width="168">Linux</td>
2108 <td align="left" width="350">
2109 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2110 </tr>
2111 <tr align="center">
2112 <td width="168">HP-UX</td>
2113 <td align="left" width="350">
2114 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2115 </tr>
2116 <tr align="center">
2117 <td width="168">OpenVMS</td>
2118 denise.eckstein 1.1 <td align="left" width="350">
2119 Pegasus/Config/DefaultPropertyTableVms.h</td>
2120 </tr>
2121 </table>
2122 </ul>
2123
2124 <h5>enableHttpsConnection</h5>
2125 <ul>
|
2126 kumpf 1.12 <b>Description: </b>If true, allows connections to
2127 the CIM Server using the HTTPS protocol (HTTP using
|
2128 denise.eckstein 1.1 Secure Socket Layer encryption)<br>
2129 <b>Default Value: </b>false<br>
2130 <b>Recommended Default Value (Development Build): </b>true<br>
2131 <b>Recommended Default Value (Release Build): </b>true<br>
2132 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2133 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2134 <b>Dynamic?: </b>No<br>
2135 <b>Considerations: </b>For this option to work,
2136 the environment variable PEGASUS_HAS_SSL must have
2137 been set when CIM Server was built.<br>
2138 <br>
2139 <table border="1" cellspacing="1" bordercolordark="#666666"
2140 bordercolorlight="#CCCCCC" width=531
2141 style='font-size=10.0pt;font-family:Arial'>
2142 <tr>
2143 <th bgcolor="#CAE6CA" width="168">Platform</th>
2144 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2145 </tr>
2146 <tr align="center">
2147 <td width="168">Linux</td>
2148 <td align="left" width="350">
2149 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2150 </tr>
2151 <tr align="center">
2152 <td width="168">HP-UX</td>
2153 <td align="left" width="350">
2154 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2155 </tr>
2156 <tr align="center">
2157 <td width="168">OpenVMS</td>
2158 <td align="left" width="350">
2159 Pegasus/Config/DefaultPropertyTableVms.h</td>
2160 </tr>
2161 </table>
2162 </ul>
2163
2164 <h5>enableIndicationService</h5>
2165 <ul>
2166 <b>Description: </b>If true, the CIM Server will support
2167 CIM Indications.<br>
2168 <b>Default Value: </b>true<br>
2169 <b>Recommended Default Value (Development Build): </b>true<br>
2170 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>true<br>
2171 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2172 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2173 <b>Dynamic?: </b>No<p> <br>
2174 <br>
2175 <table border="1" cellspacing="1" bordercolordark="#666666"
2176 bordercolorlight="#CCCCCC" width=531
2177 style='font-size=10.0pt;font-family:Arial'>
2178 <tr>
2179 <th bgcolor="#CAE6CA" width="168">Platform</th>
2180 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2181 </tr>
2182 <tr align="center">
2183 <td width="168">Linux</td>
2184 <td align="left" width="350">
2185 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2186 </tr>
2187 <tr align="center">
2188 <td width="168">HP-UX</td>
2189 <td align="left" width="350">
2190 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2191 denise.eckstein 1.1 </tr>
2192 <tr align="center">
2193 <td width="168">OpenVMS</td>
2194 <td align="left" width="350">
2195 Pegasus/Config/DefaultPropertyTableVms.h</td>
2196 </tr>
2197 </table>
2198 </ul>
2199
2200 <h5>enableNamespaceAuthorization</h5>
2201 <ul>
2202 <b>Description: </b>If true, the CIM Server restricts
|
2203 kumpf 1.12 access to namespaces based on configured user authorizations
2204 [user authorizations may be configured using the cimauth
|
2205 denise.eckstein 1.1 command]<br>
2206 <b>Default Value: </b>false<br>
2207 <b>Recommended Default Value (Development Build): </b>false<br>
2208 <b>Recommended Default Value (Release Build): </b>false<br>
2209 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2210 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2211 <b>Dynamic?: </b>No<br>
2212 <b>Considerations: </b>
2213 This option offers limited functionality and, in most
2214 environments, expensive to administer. It's use is not
2215 recommended.<br>
2216 <b>Source Configuration File: </b>
2217 Pegasus/Config/SecurityPropertyOwner.cpp</ul>
2218
2219 <h5>enableNormalization</h5>
2220 <ul>
|
2221 kumpf 1.12 <b>Description: </b>If true, objects returned from instance
|
2222 denise.eckstein 1.1 providers are validated and normalized. <br>
2223 <b>Default Value: </b>true<br>
2224 <b>Recommended Default Value (Development Build): </b>true<br>
2225 <b>Recommended Default Value (Release Build): </b>false<br>
2226 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2227 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2228 kavita.gupta 1.7 <b>Dynamic?: </b>Yes<br>
|
2229 denise.eckstein 1.1 <b>Considerations: </b>
2230 <ul>
2231 <li>Any errors encountered during normalization result in a
|
2232 kumpf 1.12 CIMException with the status code set to CIM_ERR_FAILED
2233 and a meaningful, context specific error description
|
2234 denise.eckstein 1.1 (messages will be localized). Providers that catch the
|
2235 kumpf 1.12 exception have an opportunity to handle the error.
|
2236 denise.eckstein 1.1 Otherwise, the exception is passed to the Provider Manager
|
2237 kumpf 1.12 and becomes the response for that Provider.
|
2238 denise.eckstein 1.1 <li>Provider Modules that are listed on the
|
2239 kumpf 1.12 excludeModulesFromNormalization
2240 configuration option are excluded from normalization.
|
2241 denise.eckstein 1.1 <li>Since the concept of normalization is relatively new to
2242 OpenPegasus and it establishes and enforces rules for
|
2243 kumpf 1.12 objects returned by providers, it should only
2244 apply to providers written against the SDK in which it was
|
2245 denise.eckstein 1.1 introduced (or later). Therefore only Provider Modules that
|
2246 kumpf 1.12 have the following InterfaceType and InterfaceVersion
2247 combination will be subject to normalization:
|
2248 denise.eckstein 1.1 <ul>
|
2249 kumpf 1.12 <li>'C++Default' / 2.5.0 or greater
2250 <li>'CMPI' / 2.0.0 or greater
|
2251 denise.eckstein 1.1 <li>'JMPI' / 1.0.0 or greater
2252 </ul>
2253 </ul>
2254 <b>Source Configuration File: </b>
2255 Pegasus/Config/NormalizationPropertyOwner.cpp<br>
2256 </ul>
2257
2258
2259 <h5>enableRemotePrivilegedUserAccess</h5>
2260 <ul>
|
2261 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows
|
2262 denise.eckstein 1.1 access by a privileged user from a remote system<br>
2263 <b>Default Value: </b>true<br>
2264 <b>Recommended Default Value (Development Build): </b>true<br>
2265 <b>Recommended Default Value (Release Build): </b>true<br>
2266 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2267 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2268 <b>Dynamic?: </b>No<br>
2269 <b>Considerations: </b>Many management operations require
2270 privileged user access. Disabling remote access by
|
2271 kumpf 1.12 privileged user could significantly affect
|
2272 denise.eckstein 1.1 functionality.<br>
2273 <b>Source Configuration File: </b>
2274 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2275 </ul>
2276
2277 <h5>enableSSLExportClientVerification</h5>
2278 <ul>
|
2279 kumpf 1.12 <b>Description: </b>If true, the CIM Server allows HTTPS
|
2280 denise.eckstein 1.1 connection for CIMExport requests on the port specified by the
2281 service name "wbem-exp-https".<br>
2282 <b>Default Value: </b>false<br>
2283 <b>Recommended Default Value (Development Build): </b>true<br>
2284 <b>Recommended Default Value (Release Build): </b>false<br>
2285 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2286 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2287 <b>Dynamic?: </b>No<br>
2288 <b>Source Configuration File: </b>
2289 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2290 </ul>
2291
2292
2293 <h5>enableSubscriptionsForNonprivilegedUsers</h5>
2294 <ul>
2295 <b>Description: </b>If true, operations (create instance,
|
2296 kumpf 1.12 modify instance, delete instance, get instance, enumerate
2297 instances, enumerate instance names) on indication
2298 filter, listener destination, and subscription instances
|
2299 denise.eckstein 1.1 may be performed by non-privileged users. Otherwise, these
2300 operations may only be performed on these instances by
2301 privileged users.<br>
2302 <b>Default Value: </b>true<br>
2303 <b>Recommended Default Value (Development Build): </b>true<br>
2304 <b>Recommended Default Value (Release Build): </b>false<br>
2305 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2306 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2307 <b>Dynamic?: </b>No<br>
|
2308 kumpf 1.12 <b>Considerations: </b>This option has meaning only if
|
2309 denise.eckstein 1.1 enableIndicationService=true.<br>
2310 <b>Source Configuration File: </b>
2311 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2312 </ul>
2313
2314 <h5>excludeModulesFromNormalization</h5>
2315 <ul>
|
2316 kumpf 1.12 <b>Description: </b>If the excludeModulesfromNormalization
2317 property is set, the value is interpreted as a list of
2318 comma-separated Provider Module names (as specified in
2319 PG_ProviderModule.Name) to exclude from validation and
|
2320 denise.eckstein 1.1 normalization.<br>
2321 <b>Default Value: </b>""<br>
2322 <b>Recommended Default Value (Development Build):</b>
2323 ""<br>
2324 <b>Recommended Default Value (Release Build): </b>
2325 ""<br>
2326 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2327 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2328 <b>Dynamic?: </b>No<br>
2329 <b>Considerations: </b>All objects managed by all
2330 providers will be excluded from validation and normalization
2331 if its module name appears in this list.<br>
2332 <b>Source Configuration File: </b>
2333 Pegasus/Config/NormalizationPropertyOwner.cpp
2334 </ul>
2335
2336
2337 <h5><b>exportSSLTrustStore</b></h5>
2338 <ul>
2339 <b>Description: </b>Specifies the location of the OpenSSL
2340 truststore for Indications. Consistent with the OpenSSL
2341 denise.eckstein 1.1 implementation, a truststore can be either a file or directory.
2342 If the truststore is a directory, all the certificates within
2343 the directory are considered trusted.<br>
2344 <b>Default Value: </b>indication_trust.pem<br>
2345 <b>Recommended Default Value (Development Build): </b>
2346 indication_trust.pem<br>
2347 <b>Recommended Default Value (Release Build): </b>
2348 $CERTIFICATEDIR/indication_trust.pem<br>
2349 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2350 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2351 <b>Dynamic?: </b>No<br>
2352 <b>Source Configuration File: </b>
2353 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2354 </ul>
2355
2356 <h5>forceProviderProcesses</h5>
2357 <ul>
2358 <b>Description: </b>If true, the CIM Server runs Providers
2359 in separate processes rather than loading and calling Provider
2360 libraries directly within the CIM Server process.<br>
|
2361 kumpf 1.12 <b>Default Value: </b>Dependent on the value of
|
2362 denise.eckstein 1.1 PEGASUS_DEFAULT_ENABLE_OOP<br>
2363 <b>Recommended Default Value (Development Build):</b>true (HP-UX,
2364 Linux)<br>
2365 <b>Recommended Default Value (Release Build): </b>true (HP-UX,
2366 Linux)<br>
2367 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2368 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2369 <b>Dynamic?: </b>No<br>
2370 <b>Considerations: </b>In a dynamic, potentially multi-vendor,
|
2371 kumpf 1.12 environment, the ability to run Providers in separate processes
2372 can significantly increase the stability, maintainability and
|
2373 denise.eckstein 1.1 supportability of the overall solution. Running Providers
2374 in separate process spaces: (1) helps isolate components (i.e.,
|
2375 kumpf 1.12 cimserver and Providers) from a catastrophic failure
|
2376 denise.eckstein 1.1 (segmentation faults, memory leaks) of a single Provider and (2)
2377 reduces the risk of accidental or malicious sharing of sensitive
|
2378 kumpf 1.12 data among Providers. This benefit comes at a cost.
2379 Moving Providers out of the cimserver process increases
|
2380 denise.eckstein 1.1 communication costs and can significantly increase response
2381 time. Actual results will vary, but it is common for
2382 response times to increase by a factor of 2.<br>
|
2383 kumpf 1.12 <b>Note 1: </b>When forceProviderProcesses is true, the CIM
|
2384 denise.eckstein 1.1 Server will load each Provider Module (i.e., library) into a
2385 separate process. Providers in different Provider Modules
2386 cannot depend on a communication mechanism that
2387 requires them to run in the same process space.<br>
|
2388 kumpf 1.12 <b>Note 2: </b>Although the catastrophic failure of an
|
2389 denise.eckstein 1.1 Out-Of-Process (OOP) Provider Module will not result in a
2390 failure of the CIM Server process, if the failed OOP Provider
|
2391 kumpf 1.12 Module included Indication Providers, Indications may be
|
2392 denise.eckstein 1.1 lost. If logging is enabled, the CIM Server will log a
2393 message informing administrators of what happened and what
2394 corrective actions can be taken.<br>
2395 <br>
2396 <table border="1" cellspacing="1" bordercolordark="#666666"
2397 bordercolorlight="#CCCCCC" width=531
2398 style='font-size=10.0pt;font-family:Arial'>
2399 <tr>
2400 <th bgcolor="#CAE6CA" width="168">Platform</th>
2401 <th bgcolor="#CAE6CA" width=350>
2402 Source Configuration File</th>
2403 </tr>
2404 <tr align="center">
2405 <td width="168">Linux</td>
2406 <td align="left" width="350">
2407 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2408 </tr>
2409 <tr align="center">
2410 <td width="168">HP-UX</td>
2411 <td align="left" width="350">
2412 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2413 denise.eckstein 1.1 </tr>
2414 <tr align="center">
2415 <td width="168">OpenVMS</td>
2416 <td align="left" width="350">
2417 Pegasus/Config/DefaultPropertyTableVms.h</td>
2418 </tr>
2419 </table>
2420 </ul>
2421
2422 <h5>home</h5>
2423 <ul>
2424 <b>Description: </b>If set, this configuration option defines
2425 the runtime default value for PEGASUS_HOME.<br>
2426 <b>Default Value: </b>"./"<br>
2427 <b>Recommended Default Value (Development Build)</b>"./"<br>
2428 <b>Recommended Default Value (Release Build)""</b><br>
2429 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2430 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2431 <b>Dynamic?: </b>No<p> <br>
2432 <br>
2433 <table border="1" cellspacing="1" bordercolordark="#666666"
2434 denise.eckstein 1.1 bordercolorlight="#CCCCCC" width=531
2435 style='font-size=10.0pt;font-family:Arial'>
2436 <tr>
2437 <th bgcolor="#CAE6CA" width="168">Platform</th>
2438 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2439 </tr>
2440 <tr align="center">
2441 <td width="168">Linux</td>
2442 <td align="left" width="350">
2443 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2444 </tr>
2445 <tr align="center">
2446 <td width="168">HP-UX</td>
2447 <td align="left" width="350">
2448 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2449 </tr>
2450 <tr align="center">
2451 <td width="168">OpenVMS</td>
2452 <td align="left" width="350">
2453 Pegasus/Config/DefaultPropertyTableVms.h</td>
2454 </tr>
2455 denise.eckstein 1.1 </table>
2456 </ul>
2457
2458 <h5>httpPort</h5>
2459 <ul>
|
2460 kumpf 1.12 <b>Description: </b>OpenPegasus first attempts to look up the
|
2461 denise.eckstein 1.1 port number for HTTP using getservbyname for the 'wbem-http'
|
2462 kumpf 1.12 service. The httpPort configuration setting is used only when the
|
2463 denise.eckstein 1.1 getservbyname lookup fails.<br>
2464 <b>Default Value: </b>blank<br>
2465 <b>Recommended Default Value (Development Build): </b>blank<br>
2466 <b>Recommended Default Value (Release Build): </b>5988<br>
2467 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2468 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2469 <b>Dynamic?: </b>No<br>
|
2470 kumpf 1.12 <b>Considerations: </b>(1)The use of 5988 for WBEM HTTP is
|
2471 denise.eckstein 1.1 recommended by the DMTF. This port has been registered with
2472 <a href="http://www.iana.org/assignments/port-numbers">
2473 IANA</a>. In a production environment, the recommendation is
2474 to use /etc/services to configure the value of this port. (2)
|
2475 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2476 httpPort was changed from 5988 to "". This
|
2477 denise.eckstein 1.1 change was made to allow the OpenPegasus to differentiate
|
2478 kumpf 1.12 between a default setting of 5988 and a customer-defined
|
2479 denise.eckstein 1.1 setting of 5988. With this change, if the port
|
2480 kumpf 1.12 number is explicitly set, the configured port will be used
|
2481 denise.eckstein 1.1 regardless of the settings in /etc/services. If no port number
2482 is specified, the server will continue to use the value in
2483 /etc/services.<br>
2484 <br>
2485 <table border="1" cellspacing="1" bordercolordark="#666666"
2486 bordercolorlight="#CCCCCC" width=531
2487 style='font-size=10.0pt;font-family:Arial'>
2488 <tr>
2489 <th bgcolor="#CAE6CA" width="168">Platform</th>
2490 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2491 </tr>
2492 <tr align="center">
2493 <td width="168">Linux</td>
2494 <td align="left" width="350">
2495 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2496 </tr>
2497 <tr align="center">
2498 <td width="168">HP-UX</td>
2499 <td align="left" width="350">
2500 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2501 </tr>
2502 denise.eckstein 1.1 <tr align="center">
2503 <td width="168">OpenVMS</td>
2504 <td align="left" width="350">
2505 Pegasus/Config/DefaultPropertyTableVms.h</td>
2506 </tr>
2507 </table>
2508 </ul>
2509
2510 <h5>httpsPort</h5>
2511 <ul>
2512 <b>Description: </b>
2513 OpenPegasus first attempts to look up the port number for HTTPS
2514 using getservbyname for the 'wbem-https' service. The httpsPort
|
2515 kumpf 1.12 configuration setting is used only when the getservbyname lookup
|
2516 denise.eckstein 1.1 fails.<br>
2517 <b>Default Value: </b>blank<br>
2518 <b>Recommended Default Value (Development Build): </b>blank<br>
2519 <b>Recommended Default Value (Release Build): </b>5989<br>
2520 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2521 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2522 <b>Dynamic?: </b>No<br>
2523 <b>Considerations: </b>(1)The use of 5989 for WBEM HTTPS
2524 is recommended by the DMTF. This port has been registered with
2525 <a href="http://www.iana.org/assignments/port-numbers">IANA</a>.
|
2526 kumpf 1.12 In a production environment, the recommendation is to use
|
2527 denise.eckstein 1.1 /etc/services to configure the value of this port.(2)
|
2528 kumpf 1.12 With the release of OpenPegasus 2.5, the default values for
2529 httpPort was changed from 5989 to "". This
2530 change was made to allow the OpenPegasus to differentiate
2531 between a default setting of 5989 and a customer-defined
|
2532 denise.eckstein 1.1 setting of 5989. With this change, if the port number
|
2533 kumpf 1.12 is explicitly set, the configured port will be used regardless
|
2534 denise.eckstein 1.1 of the settings in /etc/services. If no port number is specified,
2535 the server will continue to use the value in /etc/services.<br>
2536 <br>
2537
2538 <table border="1" cellspacing="1" bordercolordark="#666666"
2539 bordercolorlight="#CCCCCC" width=531
2540 style='font-size=10.0pt;font-family:Arial'>
2541 <tr>
2542 <th bgcolor="#CAE6CA" width="168">Platform</th>
2543 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2544 </tr>
2545 <tr align="center">
2546 <td width="168">Linux</td>
2547 <td align="left" width="350">
2548 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2549 </tr>
2550 <tr align="center">
2551 <td width="168">HP-UX</td>
2552 <td align="left" width="350">
2553 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2554 </tr>
2555 denise.eckstein 1.1 <tr align="center">
2556 <td width="168">OpenVMS</td>
2557 <td align="left" width="350">
2558 Pegasus/Config/DefaultPropertyTableVms.h</td>
2559 </tr>
2560 </table>
2561 </ul>
2562
2563 <h5>idleConnectionTimeout</h5>
2564 <ul>
2565 <b>Description: </b>If set to a positive integer, this value
2566 specifies a minimum timeout value for idle client connections.
2567 If set to zero, idle client connections do not time out.<br>
2568 <b>Recommended Default Value (Development Build): </b>0<br>
2569 <b>Recommended Default Value (Release Build): </b>0<br>
2570 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2571 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2572 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2573 denise.eckstein 1.1 <b>Considerations: </b>A client connection is considered
2574 idle when it is not in the process of sending a request and
2575 the CIM Server is not processing a request from that connection.
|
2576 kumpf 1.12 An idle connection timeout allows reclamation of the system
|
2577 denise.eckstein 1.1 resources allocated for idle CIM Server connections. Note that
2578 the CIM Server may allow an idle connection to persist longer
|
2579 kumpf 1.12 than the configured timeout value based on server activity.
2580 Some client applications may not behave correctly if a
|
2581 denise.eckstein 1.1 connection timeout is introduced. Client compatibility should be
2582 considered when configuring an idle connection timeout value.
|
2583 kumpf 1.12 The idle connection time is computed using the system clock.
|
2584 denise.eckstein 1.1 Thus, resetting the system clock may cause unexpected timeout
|
2585 kumpf 1.12 behavior.This config property can be changed dynamically. The
|
2586 kavita.gupta 1.11 changes will apply to all new and existing connections. <br>
|
2587 denise.eckstein 1.1 </ul>
2588
2589 <h5>logdir</h5>
2590 <ul>
2591 <b>Description: </b>Specifies the name of the directory
2592 to be used for the OpenPegasus specific log files.<br>
2593 <b>Recommended Default Value (Development Build): </b>logs<br>
2594 <b>Recommended Default Value (Release Build): </b>$LOGDIR<br>
2595 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2596 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2597 <b>Dynamic?: </b>Yes<br>
|
2598 kumpf 1.12 <b>Considerations: </b>This option is not supported if
|
2599 denise.eckstein 1.1 PEGASUS_USE_SYSLOGS is defined.<br>
2600 <b>Source Configuration File: </b>
2601 Pegasus/Config/LogPropertyOwner.cpp<br>
2602 </ul>
2603
2604 <h5>logLevel</h5>
2605 <ul>
|
2606 kumpf 1.12 <b>Description: </b>Defines the desired level of logging.
|
2607 denise.eckstein 1.1 Valid values include: TRACE, INFORMATION, WARNING, SEVERE,
2608 FATAL.<br>
2609 <b>Default Value: </b>"INFORMATION"<br>
2610 <b>Recommended Default Value (Development Build): </b>
2611 "INFORMATION"<br>
2612 <b>Recommended Default Value (Release Build): </b>"SEVERE"<br>
2613 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2614 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2615 <b>Dynamic?: </b>Yes<br>
2616 <b>Considerations: </b><br>
2617 <b>Source Configuration File: </b>
2618 Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2619 </ul>
2620
|
2621 mreddy 1.3 <h5>maxLogFileSizeKBytes</h5>
2622 <ul>
|
2623 kumpf 1.12 <b>Description: </b>Specifies the maximum size of the logfile in Kilo
|
2624 mreddy 1.3 Bytes. If the logfile size exceeds maxLogFileSizeKBytes logfile will be pruned.<br>
2625 <b>Default Value: </b>32768<br>
2626 <b>Recommended Default Value (Development Build): </b> 32768<br>
2627 <b>Recommended Default Value (Release Build): </b>32768<br>
2628 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2629 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/No<br>
2630 <b>Dynamic?:</b> Yes<br>
2631 <b>Considerations:</b> This option is not supported if PEGASUS_USE_SYSLOGS is defined. Minimum accepted value is 32 KB. <br>
2632 <b>Source Configuration File:</b> Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2633 </ul>
|
2634 denise.eckstein 1.1 <h5>maxProviderProcesses</h5>
2635 <ul>
2636 <b>Description:</b> Limits the number of provider
|
2637 kumpf 1.12 processes (see 'forceProviderProcesses) that may run
|
2638 denise.eckstein 1.1 concurrently. A 'maxProviderProcesses' value of '0' indicates
2639 that the number of Provider Agent processes is unlimited<br>
2640 <b>Default Value: </b>0<br>
2641 <b>Recommended Default Value (Development Build):</b> 0<br>
2642 <b>Recommended Default Value (Release Build):</b> 0<br>
2643 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2644 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
|
2645 kavita.gupta 1.9 <b>Dynamic?: </b>Yes<br>
|
2646 kumpf 1.12 <b>Considerations: </b>Consider there are five provider processes
2647 already running and the maxProviderProcesses is dynamically changed to
2648 four. In this case though new provider processes will not be created
|
2649 kavita.gupta 1.9 but existing five will continue running<br>
|
2650 denise.eckstein 1.1 <br>
2651 <table border="1" cellspacing="1" bordercolordark="#666666"
2652 bordercolorlight="#CCCCCC" width=531
2653 style='font-size=10.0pt;font-family:Arial'>
2654 <tr>
2655 <th bgcolor="#CAE6CA" width="168">Platform</th>
2656 <th bgcolor="#CAE6CA" width=350>
2657 Source Configuration File</th>
2658 </tr>
2659 <tr align="center">
2660 <td width="168">Linux</td>
2661 <td align="left" width="350">
2662 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2663 </tr>
2664 <tr align="center">
2665 <td width="168">HP-UX</td>
2666 <td align="left" width="350">
2667 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2668 </tr>
2669 <tr align="center">
2670 <td width="168">OpenVMS</td>
2671 denise.eckstein 1.1 <td align="left" width="350">
2672 Pegasus/Config/DefaultPropertyTableVms.h</td>
2673 </tr>
2674 </table>
2675 </ul>
2676
2677 <h5>messageDir</h5>
2678 <ul>
2679 <b>Description: </b>Specifies the name of the directory to
2680 be used for the OpenPegasus translated messages.<br>
2681 <b>Default Value: </b>msg<br>
2682 <b>Recommended Default Value (Development Build): </b>msg<br>
2683 <b>Recommended Default Value (Release Build):</b>
2684 $MESSAGEDIR/msg<br>
2685 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2686 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2687 <b>Dynamic?: </b>No<br>
2688 <b>Considerations: </b>Only used when message localization
2689 is enabled. See PEGASUS_HAS_MESSAGES for details.<br>
2690 <b>Source Configuration File: </b>
2691 FileSystemPropertyOwner.cpp<br>
2692 denise.eckstein 1.1 </ul>
2693
2694 <h5>providerDir</h5>
2695 <ul>
|
2696 kumpf 1.12 <b>Description: </b>Specifies the names of the directories
|
2697 denise.eckstein 1.1 that contains Provider executables.<br>
2698 <b>Recommended Default Value (Development Build): </b>lib<br>
2699 <b>Recommended Default Value (Release Build): </b>
2700 $PROVIDERDIRS<br>
2701 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2702 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
|
2703 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2704 denise.eckstein 1.1 <b>Considerations: </b>The CIM Server runs as a privileged
2705 user. And, since Providers run in the same process space as the
|
2706 kumpf 1.12 CIM Server, Providers also have privileged access to the
|
2707 denise.eckstein 1.1 system. Allowing a registered Provider’s executable to be
|
2708 kumpf 1.12 replaced with malicious code would result in a critical
|
2709 denise.eckstein 1.1 security defect, giving a malicious user privileged access
2710 to the system. Adminstrators are responsible for ensuring
2711 that only trusted Providers are loaded into providerDir.
2712 In order to simplify the management task associated with
2713 securing Provider executable, the value of providerDir can be
2714 fixed at build time (i.e., set to one or more fixed, well-known
2715 locations).<br>
2716 <b>Source Configuration File: </b>
2717 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2718 </ul>
|
2719 kumpf 1.12
|
2720 denise.eckstein 1.1 <h5>providerManagerDir</h5>
2721 <ul>
2722 <b>Description: </b>Specifies the name of the directory that
2723 contains the ProviderManager plugin libraries.<br>
2724 <b>Recommended Default Value (Development Build): </b>lib<br>
2725 <b>Recommended Default Value (Release Build): </b>
2726 $PROVIDERMANAGERDIRS<br>
2727 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2728 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2729 <b>Dynamic?: </b>No<br>
2730 <b>Considerations: </b>Should be a dedicated directory to
2731 minimize inspection of non-applicable files. Additionally,
2732 since all calls to the providers go through the provider
2733 managers, the same care should be taken with regards to
2734 security for the provider manager directory, as for provider
2735 directories.<br>
2736 <b>Source Configuration File: </b>
2737 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
|
2738 kumpf 1.12 </ul>
|
2739 denise.eckstein 1.1
2740 <h5>repositoryDir</h5>
2741 <ul>
|
2742 kumpf 1.12 <b>Description: </b>Specifies the name of the directory
|
2743 denise.eckstein 1.1 to be used for the OpenPegasus repository.<br>
2744 <b>Recommended Default Value (Development Build): </b>repository<br>
2745 <b>Recommended Default Value (Release Build): </b>
2746 $REPOSITORYDIR/repository<br>
2747 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2748 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2749 <b>Dynamic?: </b>No<br>
2750 <b>Considerations: </b><br>
2751 <b>Source Configuration File: </b>
2752 Pegasus/Config/FileSystemPropertyOwner.cpp<p><br>
2753 </ul>
2754
2755 <h5>repositoryIsDefaultInstanceProvider</h5>
2756 <ul>
|
2757 kumpf 1.12 <b>Description: </b>If true, the Repository functions
2758 as the Instance Provider for all classes for which there
2759 is not an explicitly registered Provider. This flag is
2760 also used to control the behavior of the repository when
|
2761 denise.eckstein 1.1 processing association operators.<br>
2762 <b>Recommended Default Value (Development Build): </b>true<br>
|
2763 kumpf 1.12 <b>Recommended Default Value (Release Build): </b>false<br>
|
2764 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2765 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
2766 <b>Dynamic?: </b>No<br>
2767 <b>Considerations: </b>This flag can be used to configure
2768 the CIM Server to allow the Repository to be used by CIM Clients
2769 and CIM Providers as a dynamic data store. The setting of this
|
2770 kumpf 1.12 flag will significantly affect CIM Server behavior as viewed
2771 by the CIM Client.<br>
2772
2773 The following issues should be considered when setting
|
2774 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=true:
2775
2776 <ul>
|
2777 kumpf 1.12 <li><b>Authorization.</b> The repository has no
|
2778 denise.eckstein 1.1 concept of which users (or components) are authorized to
2779 perform which operations.</li>
2780 <li><b>Appearance of instrumentation.</b> A client application
|
2781 kumpf 1.12 cannot determine whether instrumentation exists for a
2782 given CIM class. For example, imagine a client
2783 issues a CreateInstance operation on a Disk class
|
2784 denise.eckstein 1.1 for which no provider is registered.
2785 The instance will be stored in the repository, and
|
2786 kumpf 1.12 the client gets a "success" response. Does that mean a
|
2787 denise.eckstein 1.1 disk device has been created on the server? Even worse,
|
2788 kumpf 1.12 when another client issues an EnumerateInstances
|
2789 denise.eckstein 1.1 operation, the spurious Disk instance is returned.
2790 With repositoryIsDefaultInstanceProvider=false, the
|
2791 kumpf 1.12 CreateInstance operation above would have returned a
2792 NOT_SUPPORTED error.</li>
|
2793 denise.eckstein 1.1 <li><b>Potential for inconsistent data.</b> Using the
2794 repository as a data cache increases the probability
2795 that a client will see stale or incorrect data. A
|
2796 kumpf 1.12 provider can better control the correlation
|
2797 denise.eckstein 1.1 between the data returned and the current state of the
|
2798 kumpf 1.12 underlying managed resource (whether or not the provider
|
2799 denise.eckstein 1.1 caches the data).</li>
2800 </ul>
2801 <br>
|
2802 kumpf 1.12
2803 The following issues should be considered when setting
|
2804 denise.eckstein 1.1 repositoryIsDefaultInstanceProvider=false:
2805
2806 <ul>
2807 <li><b>Provider Availability.</b> Certain Providers have been
|
2808 kumpf 1.12 developed to use the Repository as a dynamic data store.
2809 These Providers are currently not supported on system
|
2810 denise.eckstein 1.1 where this flag is disabled. E.g., the Common Diagnostics
|
2811 kumpf 1.12 Model (CDM) Provider
|
2812 denise.eckstein 1.1 (http://developer.intel.com/design/servers/cdm/)
|
2813 kumpf 1.12 relies on use of the Repository to store instances
2814 of CIM_DiagnosticSetting. If this flag set to
2815 false, this Provider will not function correctly. Note
2816 that this feature is supported by other WBEM
|
2817 denise.eckstein 1.1 implementation. Therefore, disabling this feature
2818 can increase the cost of migrating existing Providers to
2819 OpenPegasus.</li>
|
2820 kumpf 1.12 </ul>
|
2821 denise.eckstein 1.1
|
2822 kumpf 1.12 <b>Source Configuration File: </b>
|
2823 denise.eckstein 1.1 Pegasus/Config/RepositoryPropertyOwner.cpp<br>
2824 </ul>
|
2825 kumpf 1.12
|
2826 denise.eckstein 1.1 <h5>shutdownTimeout</h5>
2827 <ul>
2828 <b>Description: </b>When a cimserver -s shutdown command is
2829 issued, specifies the maximum time in seconds for the CIM Server
2830 to complete outstanding CIM operation requests before shutting
2831 down; if the specified timeout period expires, the CIM Server
|
2832 kumpf 1.12 will shut down, even if there are still CIM operations in
|
2833 denise.eckstein 1.1 progress. Minimum value is 2 seconds.<br>
2834 <b>Recommended Default Value (Development Build): </b>10<br>
2835 <b>Recommended Default Value (Release Build): </b>10<br>
2836 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2837 <b>Recommend To Be Fixed/Hidden (Release Build):</b>No/No<br>
2838 <b>Dynamic?: </b>Yes<br>
2839 <b>Considerations: </b><br>
2840 <b>Source Configuration File: </b>
2841 Pegasus/Config/ShutdownPropertyOwner.cpp<br>
2842 </ul>
2843
2844 <h5>slp</h5>
2845 <ul>
2846 <b>Description: </b>When set to true, OpenPegasus activates
2847 an SLP SA and issues DMTF defined SLP advertisements to this SA
2848 on startup.<br>
2849 <b>Default Value: </b>false<br>
2850 <b>Recommended Default Value (Development Build): </b>false<br>
2851 <b>Recommended Default Value (Release Build): </b>false<br>
2852 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2853 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2854 denise.eckstein 1.1 <b>Dynamic?: </b>No<p> <br>
2855 <br>
2856 <table border="1" cellspacing="1" bordercolordark="#666666"
2857 bordercolorlight="#CCCCCC" width=531
2858 style='font-size=10.0pt;font-family:Arial' height="80">
2859 <tr>
2860 <th bgcolor="#CAE6CA" width="168" height="16">Platform</th>
2861 <th bgcolor="#CAE6CA" width=350 height="16">
2862 Source Configuration File</th>
2863 </tr>
2864 <tr align="center">
2865 <td width="168" height="14">Linux</td>
2866 <td align="left" width="350" height="14">
2867 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2868 </tr>
2869 <tr align="center">
2870 <td width="168" height="14">HP-UX</td>
2871 <td align="left" width="350" height="14">
2872 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2873 </tr>
2874 <tr align="center">
2875 denise.eckstein 1.1 <td width="168" height="16">OpenVMS</td>
2876 <td align="left" width="350" height="16">
2877 Pegasus/Config/DefaultPropertyTableVms.h</td>
2878 </tr>
2879 </table>
2880 </ul>
2881
2882 <h5>socketWriteTimeout</h5>
2883 <ul>
2884 <b>Description: </b>If the CIM Server receives an
2885 EWOULDBLOCK/EAGAIN error on a non-blocking write,
|
2886 kumpf 1.12 socketWriteTimeout defines the number of seconds the
2887 CIM Server will wait for the socket to get ready and resume
|
2888 denise.eckstein 1.1 writing data.<br>
2889 <b>Recommended Default Value (Development Build): </b>
2890 20 (seconds)<br>
2891 <b>Recommended Default Value (Release Build): </b>
2892 20 (seconds)<br>
2893 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2894 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2895 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
2896 <b>Considerations: </b>Any changes made to this config property
|
2897 kumpf 1.12 dynamically will apply to new CIM Server connections only
|
2898 kavita.gupta 1.11 keeping old already established connections unchanged.<br>
|
2899 denise.eckstein 1.1 <b>Source Configuration File: </b>
2900 Pegasus/Config/DefaultPropertyTable.h
2901 </ul>
2902
2903 <h5>sslCertificateFilePath</h5>
2904 <ul>
|
2905 kumpf 1.12 <b>Description: </b>Contains the CIM Server SSL
|
2906 denise.eckstein 1.1 Certificate.<br>
2907 <b>Recommended Default Value (Development Build): </b>
2908 server.pem<br>
2909 <b>Recommended Default Value (Release Build): </b>
2910 $CERTIFICATEDIR/server.pem"<br>
2911 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2912 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2913 <b>Dynamic?: </b>No<br>
2914 <b>Considerations: </b>For a more detailed look at SSL options
2915 and their ramifications, please see the SSL guidelines.<br>
2916 <b>Source Configuration File: </b>
2917 Pegasus/Config/SecurityPropertyOwner.cpp
2918 </ul>
2919
2920 <h5>sslClientVerificationMode</h5>
2921 <ul>
2922 <b>Description: </b>Describes the desired level of support
2923 for certificate-based authentication.
2924 <ul style="MARGIN-TOP: 0in" type="circle">
2925 <li>“<b>required</b>” – The server requires certificate-based
|
2926 kumpf 1.12 client authentication. A client MUST present a
|
2927 denise.eckstein 1.1 trusted certificate in order to access the CIM Server.
|
2928 kumpf 1.12 If the client fails to send a certificate or sends an
|
2929 denise.eckstein 1.1 untrusted certificate, the connection will be rejected.</li>
2930 <li>“<b>optional</b>” – The server supports, but does not
|
2931 kumpf 1.12 require, certificate-based client authentication. The
2932 server will request and attempt to validate a client
|
2933 denise.eckstein 1.1 certificate, however the connection will be accepted even
2934 if no certificate is sent or an untrusted certificate is
2935 sent. The server will then seek to authenticate the
2936 client via an authentication header.</li>
|
2937 kumpf 1.12 <li>“<b>disabled</b>” – The server does not support
|
2938 denise.eckstein 1.1 certificate-based client authentication.</li>
2939 </ul>
2940 <b>Recommended Default Value (Development Build): </b>
2941 disabled<br>
2942 <b>Recommended Default Value (Release Build): </b>
2943 disabled<br>
2944 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2945 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2946 <b>Dynamic?: </b>No<br>
2947 <b>Considerations: </b>(1) This property is only used if
2948 <b>enableHttpsConnection</b> is <b>"true"</b>.
2949 (2) If the platform does not support PEGASUS_LOCAL_DOMAIN_SOCKET,
2950 OpenPegasus attempts to use either HTTPS or
|
2951 kumpf 1.12 HTTP to establish a local connection (connectLocal).
|
2952 denise.eckstein 1.1 For platforms that do not support PEGASUS_LOCAL_DOMAIN_SOCKET,
|
2953 kumpf 1.12 Clients which use connectLocal, such as cimconfig -l -c,
|
2954 denise.eckstein 1.1 cimprovider -l -s and cimserver -s, will not work if the
2955 "sslClientVerificationMode" variable is set to
2956 "required" and HTTP is disabled. For these
|
2957 kumpf 1.12 platforms, the recommended course of action is to change the
|
2958 denise.eckstein 1.1 property value to "optional."<br>
2959 <b>Source Configuration File: </b>
2960 Pegasus/Config/SecurityPropertyOwner.cpp
2961 </ul>
2962
2963 <h5>sslKeyFilePath</h5>
2964 <ul>
2965 <b>Description: </b>Contains the private key for the CIM
2966 Server SSL Certificate.<br>
2967 <b>Recommended Default Value (Development Build): </b>
2968 file.pem<br>
2969 <b>Recommended Default Value (Release Build): </b>
2970 $CERTIFICATEDIR/file.pem<br>
2971 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2972 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2973 <b>Dynamic?: </b>No<br>
2974 <b>Considerations: </b>File should be readable only by the
2975 user the cimserver is running as and/or privileged users. The
2976 file should be writeable only by a privileged user.<br>
2977 <b>Source Configuration File: </b>
2978 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2979 denise.eckstein 1.1 </ul>
2980
2981 <h5>sslTrustStore</h5>
2982 <ul>
2983 <b>Description: </b>Specifies the location of the OpenSSL
|
2984 kumpf 1.12 truststore. Consistent with the OpenSSL implementation, a
|
2985 denise.eckstein 1.1 truststore can be either a file or directory. If the truststore
|
2986 kumpf 1.12 is a directory, all the certificates within the directory are
|
2987 denise.eckstein 1.1 considered trusted.<br>
2988 <b>Recommended Default Value (Development Build): </b>
2989 client.pem<br>
2990 <b>Recommended Default Value (Release Build): </b>
2991 $CERTIFICATEDIR/client.pem<br>
2992 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2993 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2994 <b>Dynamic?: </b>No<br>
2995 <b>Source Configuration File: </b>
2996 Pegsus/Config/SecurityPropertyOwner.cpp
2997 </ul>
2998
2999 <h5>sslTrustStoreUserName</h5>
3000 <ul>
3001 <b>Description: </b>Specifies the system user name to be
3002 associated with all certificate-based authenticated requests.<br>
3003 <b>Recommended Default Value (Development Build): </b>NONE<br>
3004 <b>Recommended Default Value (Release Build): </b>NONE<br>
3005 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3006 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3007 <b>Dynamic?: </b>No<br>
3008 denise.eckstein 1.1 <b>Considerations: </b>This property has no default; for
|
3009 kumpf 1.12 security reasons, the system administrator must explicitly
|
3010 denise.eckstein 1.1 specify this value. This feature allows a single user
3011 name to be specified. This user will be associated
3012 with all certificates in the truststore. In the future,
3013 OpenPegasus will allow a system administrator to associate a
3014 distinct user name with each certificate.<br>
3015 <b>Source Configuration File: </b>
3016 Pegsus/Config/SecurityPropertyOwner.cpp<br>
3017 </ul>
3018
3019 <h5>traceComponents</h5>
3020 <ul>
3021 <b>Description: </b>Defines the components to be traced.<br>
3022 <b>Default Value: </b>""<br>
3023 <b>Recommended Default Value (Development Build): </b>""<br>
3024 <b>Recommended Default Value (Release Build): </b>""<br>
3025 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3026 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3027 <b>Dynamic?: </b>Yes<br>
3028 <b>Source Configuration File: </b>
3029 Pegasus/Config/TracePropertyOwner.cpp<br>
3030 </ul>
3031 denise.eckstein 1.1
3032 <h5>traceFacility</h5>
3033 <ul>
|
3034 kumpf 1.12 <b>Description: </b>Defines the desired facility for trace
|
3035 denise.eckstein 1.1 messages. Valid values include: "File"
3036 and "Log".<br>
3037 <b>Default Value: </b>File<br>
3038 <b>Recommended Default Value (Development Build): </b>File<br>
3039 <b>Recommended Default Value (Release Build): </b>File<br>
3040 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3041 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3042 <b>Dynamic?: </b>Yes<br>
3043 <b>Case Sensitive?: </b>No<br>
3044 <b>Considerations: </b>If you specify "File",
|
3045 kumpf 1.12 trace messagesare written into the file specified by the
|
3046 denise.eckstein 1.1 configuration option traceFilePath. If you specify
|
3047 kumpf 1.12 "Log", trace messages are written to the
|
3048 denise.eckstein 1.1 OpenPegasus Log.<br>
3049 <b>Source Configuration File: </b>
3050 Pegasus/Config/TracePropertyOwner.cpp<br>
3051 </ul>
3052
3053 <h5>traceFilePath</h5>
3054 <ul>
3055 <b>Description: </b>Specifies the location of the
3056 OpenPegasus trace file.<br>
3057 <b>Default Value: </b>cimserver.trc<br>
3058 <b>Recommended Default Value (Development Build):</b>
3059 cimserver.trc<br>
3060 <b>Recommended Default Value (Release Build): </b>
3061 $TRACEDIR/cimserver.trc<br>
3062 <b>Recommend To Be Fixed/Hidden (Development Build):</b>No/No<br>
3063 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3064 <b>Dynamic?: </b>Yes<br>
3065 <b>Source Configuration File: </b>
3066 Pegasus/Config/TracePropertyOwner.cpp<br>
3067 </ul>
3068
3069 denise.eckstein 1.1 <h5>traceLevel</h5>
3070 <ul>
3071 <b>Description: </b></b>Defines the desired level of
3072 tracing. Valid values include: 0, 1, 2, 3, 4, 5.<br>
3073 <b>Default Value: </b>0<br>
3074 <b>Recommended Default Value (Development Build): </b>0<br>
3075 <b>Recommended Default Value (Release Build): </b>0<<br>
3076 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3077 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3078 <b>Dynamic?: </b>Yes<br>
3079 <b>Source Configuration File: </b>
3080 Pegasus/Config/TracePropertyOwner.cpp<br>
3081 </ul>
3082
3083 <h3>Configuration Constants</h3>
3084
3085 <h4>Definitions</h4>
3086
3087 <h5>static char CURRENT_CONFIG_FILE [] = </h5>
3088 <ul>
3089 <b>Description: </b>Default file name for the current
3090 denise.eckstein 1.1 configuration file.<br>
3091 <b>Recommended Default Value (Development Build):</b>
3092 cimserver_current.conf<br>
3093 <b>Recommended Default Value (Release Build): </b>
3094 $CONFIGDIR/cimserver_current.conf<br>
3095 <b>Dynamic?: </b>No <br>
3096 <br>
3097 <table border="1" cellspacing="1" bordercolordark="#666666"
3098 bordercolorlight="#CCCCCC" width=531
3099 style='font-size=10.0pt;font-family:Arial'>
3100 <tr>
3101 <th bgcolor="#CAE6CA" width="168">Platform</th>
3102 <th bgcolor="#CAE6CA" width=350>
3103 Source Configuration File</th>
3104 </tr>
3105 <tr align="center">
3106 <td width="168">Linux</td>
3107 <td align="left" width="350">
3108 Pegasus/Config/ConfigFileDirLinux.h</td>
3109 </tr>
3110 <tr align="center">
3111 denise.eckstein 1.1 <td width="168">HP-UX</td>
3112 <td align="left" width="350">ConfigFileDirHpux.h</td>
3113 </tr>
3114 <tr align="center">
3115 <td width="168">OpenVMS</td>
3116 <td align="left" width="350">
3117 Pegasus/Config/ConfigFileDirVms.h</td>
3118 </tr>
3119 </table>
3120 </ul>
3121
3122 <h5>static char PLANNED_CONFIG_FILE [] = </h5>
3123 <ul>
|
3124 kumpf 1.12 <b>Description: </b>Default file name for the planned
|
3125 denise.eckstein 1.1 configuration file.<br>
3126 <b>Recommended Default Value (Development Build): </b>
3127 cimserver_planned.conf<br>
3128 <b>Recommended Default Value (Release Build): </b>
3129 $CONFIGDIR/cimserver_planned.conf<br>
3130 <b>Dynamic?: </b>No<br>
3131 <br>
3132 <table border="1" cellspacing="1" bordercolordark="#666666"
3133 bordercolorlight="#CCCCCC" width=531
3134 style='font-size=10.0pt;font-family:Arial'>
3135 <tr>
3136 <th bgcolor="#CAE6CA" width="168">Platform</th>
3137 <th bgcolor="#CAE6CA" width=350>
3138 Source Configuration File</th>
3139 </tr>
3140 <tr align="center">
3141 <td width="168">Linux</td>
3142 <td align="left" width="350">
3143 Pegasus/Config/ConfigFileDirLinux.h</td>
3144 </tr>
3145 <tr align="center">
3146 denise.eckstein 1.1 <td width="168">HP-UX</td>
3147 <td align="left" width="350">
3148 Pegasus/Config/ConfigFileDirHpux.h</td>
3149 </tr>
3150 <tr align="center">
3151 <td width="168">OpenVMS</td>
3152 <td align="left" width="350">
3153 Pegasus/Config/ConfigFileDirVms.h</td>
3154 </tr>
3155 </table>
3156 </ul>
3157
3158 <h5>static char CIMSERVER_START_FILE [] = </h5>
3159 <ul>
3160 <b>Description: </b>This is for the default file name
3161 for the cimserver startup file containing the PID.<br>
3162 <b>Default Value: </b>/tmp/cimserver_start.conf<br>
3163 <b>Recommended Default Value (Development Build): </b>
3164 /tmp/cimserver_start.conf<br>
3165 <b>Recommended Default Value (Release Build): </b>
3166 $PIDFILE<br>
3167 denise.eckstein 1.1 <b>Dynamic?: </b>No<br>
3168 <br>
3169 <table border="1" cellspacing="1" bordercolordark="#666666"
3170 bordercolorlight="#CCCCCC" width=531
3171 style='font-size=10.0pt;font-family:Arial'>
3172 <tr>
3173 <th bgcolor="#CAE6CA" width="168">Platform</th>
3174 <th bgcolor="#CAE6CA" width=350>
3175 Source Configuration File</th>
3176 </tr>
3177 <tr align="center">
3178 <td width="168">Linux</td>
3179 <td align="left" width="350">
3180 Pegasus/Config/ConfigFileDirLinux.h</td>
3181 </tr>
3182 <tr align="center">
3183 <td width="168">HP-UX</td>
3184 <td align="left" width="350">
3185 Pegasus/Config/ConfigFileDirHpux.h</td>
3186 </tr>
3187 <tr align="center">
3188 denise.eckstein 1.1 <td width="168">OpenVMS</td>
3189 <td align="left" width="350">
3190 Pegasus/Config/ConfigFileDirVms.h</td>
3191 </tr>
3192 </table>
3193 </ul>
3194
3195 <h3>Configuration Macros</h3>
3196
3197 <h4>Definitions</h4>
3198
3199 <h5>PEGASUS_SSLCLIENT_CERTIFICATEFILE</h5>
3200 <ul>
3201 <b>Description: </b><br>
3202 <b>Recommended Default Value (Development Build): </b>client.pem<br>
3203 <b>Recommended Default Value (Release Build): </b>
3204 $CERTIFICATEDIR/client.pem<br>
3205 <b>Dynamic?: </b>No<br>
3206 <b>Source Configuration File: </b>
3207 Pegasus/Common/Constants.h<br>
3208 </ul>
3209 denise.eckstein 1.1
3210 <h5>PEGASUS_SSLCLIENT_RANDOMFILE</h5>
3211 <ul>
3212 <b>Description: </b>On platforms that do not support
|
3213 kumpf 1.12 /dev/random or /dev/urandom, OpenSSL will use this file to
3214 seed the PRNG (Pseudo-Random Number Generator). This
3215 PEGASUS_SSLCLIENT_RANDOMFILE defines the default CIM
|
3216 denise.eckstein 1.1 Client random file.<br>
3217 <b>Recommended Default Value (Development Build):</b>ssl.rnd<br>
3218 <b>Recommended Default Value (Release Build):</b>
3219 $RANDOMDIR/ssl.rnd<br>
3220 <b>Dynamic?: </b>No<br>
3221 <b>Considerations: </b>Use of this variable requires
|
3222 kumpf 1.12 PEGASUS_HAS_SSL to be set. CIM Client use of a
|
3223 denise.eckstein 1.1 shared random file is not recommended. On systems where
3224 /dev/random or /dev/urandom are not available, CIM Clients are
|
3225 kumpf 1.12 encouraged to generate a unique random file which
|
3226 denise.eckstein 1.1 contains sufficient entropy.<br>
3227 <b>Source Configuration File: </b>
3228 Pegasus/Common/Constants.h<br>
3229 </ul>
3230
3231 <h5>PEGASUS_SSLSERVER_RANDOMFILE</h5>
3232 <ul>
|
3233 kumpf 1.12 <b>Description: </b>On platforms that do not support
3234 /dev/random or /dev/urandom, OpenSSL will use this file
3235 to seed the PRNG (Pseudo-Random Number Generator). This
3236 PEGASUS_SSLSERVER_RANDOMFILE defines the CIM Server
|
3237 denise.eckstein 1.1 random file.<br>
3238 <b>Recommended Default Value (Development Build): </b>
3239 cimserver.rnd<br>
3240 <b>Recommended Default Value (Release Build): </b>
3241 $RANDOMDIR/cimserver.rnd<br>
3242 <b>Dynamic?: </b>No<br>
3243 <b>Considerations: </b>1)Use of this variable
3244 requires PEGASUS_HAS_SSL to be set.(2) On systems where
|
3245 kumpf 1.12 /dev/random or /dev/urandom are not available, CIM Server
3246 vendors need to be sure that the cimserver.rnd file
|
3247 denise.eckstein 1.1 contains sufficient entropy and is uniquely generated for
3248 each system.<br>
3249 <b>Source Configuration File: </b>
3250 Pegasus/Common/Constants.h<b><br>
3251 </ul>
3252
3253 <h5>PEGASUS_LOCAL_AUTH_DIR</h5>
3254 <ul>
3255 <b>Description:</b> </b>For local connections (i.e.,
|
3256 kumpf 1.12 connectLocal), OpenPegasus uses a file-based authentication
|
3257 denise.eckstein 1.1 mechanism.<br>
3258 <b>Recommended Default Value (Development Build): </b>/tmp<br>
3259 <b>Recommended Default Value (Release Build): </b>
3260 $LOCALAUTHDIR/localauth<br>
3261 <b>Dynamic?: </b>No<br>
3262 <b>Source Configuration File: </b>
3263 Pegasus/Common/Constants.h<br>
3264 </ul>
3265
3266 <h5>PEGASUS_LOCAL_DOMAIN_SOCKET_PATH</h5>
3267 <ul>
3268 <b>Description: </b><br>
3269 <b>Recommended Default Value (Development Build): </b>
3270 /tmp/cimxml.socket<br>
3271 <b>Recommended Default Value (Release Build): </b>
3272 $SOCKETDIR/cimxml.socket<br>
3273 <b>Dynamic?: </b>No<br>
3274 <b>Source Configuration File: </b>
3275 Pegasus/Common/Constants.h<br>
3276 </ul>
3277
3278 denise.eckstein 1.1 <hr>
|
3279 martin 1.13 <p>Licensed to The Open Group (TOG) under one or more contributor license
3280 agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
3281 this work for additional information regarding copyright ownership.
3282 Each contributor licenses this file to you under the OpenPegasus Open
3283 Source License; you may not use this file except in compliance with the
3284 License.</p>
3285 <p>Permission is hereby granted, free of charge, to any person obtaining a
3286 copy of this software and associated documentation files (the "Software"),
3287 to deal in the Software without restriction, including without limitation
3288 the rights to use, copy, modify, merge, publish, distribute, sublicense,
3289 and/or sell copies of the Software, and to permit persons to whom the
3290 Software is furnished to do so, subject to the following conditions:</p>
3291 <p>The above copyright notice and this permission notice shall be included
3292 in all copies or substantial portions of the Software.</p>
3293 <p>THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
3294 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
3295 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
3296 IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
3297 CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
3298 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
3299 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.</p>
|
3300 denise.eckstein 1.1 <hr>
3301 </body>
3302 </html>
|