1 denise.eckstein 1.1 <html>
2 <head>
3 <link rel="stylesheet" href=
4 "http://www.opengroup.org/stylesheets/info1.css">
5 </head>
6
7 <body>
8 <hr>
9
10 <p align="center">
11 <b><font size="4">Recommended OpenPegasus Build and Configuration Options for Selected Platforms</font></b>
12 </p>
13
14 <hr>
15
16 <p><b>Abstract: </b>
17 This document defines a set of recommended options for building,
18 testing and running OpenPegasus on a selected set of
19 platforms. In this version of the document, platform-specific configuration
20 information have been documented for the platforms described in the
21 "Documented Platforms" section of this document.
22 denise.eckstein 1.1 </p>
23
24 <p><b>Note 1: </b>
25 The recommendations defined in this document are not intended to document
26 the feature set included in any vendor's OpenPegasus-based product.
27 Rather, the purpose of this document is to provide input to vendors when
28 making product decisions.<BR>
29 </p>
30
31 <hr>
32
33 <h2>Definition of the Problem</h2>
34
35 <p>OpenPegasus supports a large number of build and runtime options.
36 Determining which options to use can be challenging. The purpose of this
37 document is to simplify the build, testing and administration of OpenPegasus
38 by providing a recommended, tested set of options.</p>
39
40 <h2>Documented Platforms</h2>
41
42 <p>Support for the OpenPegasus build and runtime options described in
43 denise.eckstein 1.1 this document varies by platform. In this version of the
44 document, platform-specific configuration information has been included
45 for the platforms described in the following table. For all other
46 platforms, please consult the OpenPegasus Platform Advocate for
47 additional information.</p>
48
49 <ul>
50 <table border="1" cellspacing="1" bordercolordark="#666666"
51 bordercolorlight="#CCCCCC" width=20%>
52 <tr>
53 <th bgcolor="#CAE6CA" align=center>Platform</th>
54 <th bgcolor="#CAE6CA" align=center>Status</th>
55 </tr>
56 <tr align="left">
57 <td>HPUX_IA64_ACC</td>
58 <td> </td>
59 </tr>
60 <tr align="left">
61 <td>HPUX_PARISC_ACC</td>
62 <td> </td>
63 </tr>
64 denise.eckstein 1.1 <tr align="left">
65 <td>LINUX_IA64_GNU</td>
66 <td> </td>
67 </tr>
68 <tr align="left">
69 <td>LINUX_IX86_GNU</td>
70 <td> </td>
71 </tr>
72 <tr align="left">
73 <td>LINUX_PPC64_GNU</td>
74 <td> </td>
75 </tr>
76 <tr align="left">
77 <td>LINUX_PPC_GNU</td>
78 <td> </td>
79 </tr>
80 <tr align="left">
81 <td>LINUX_XSCALE_GNU</td>
82 <td> </td>
83 </tr>
84 <tr align="left">
85 denise.eckstein 1.1 <td>LINUX_ZSERIES64_GNU</td>
86 <td> </td>
87 </tr>
88 <tr align="left">
89 <td>LINUX_ZSERIES_GNU</td>
90 <td> </td>
91 </tr>
92 <tr align="left">
93 <td>VMS_ALPHA_DECCXX</td>
94 <td> </td>
95 </tr>
96 <tr align="left">
97 <td>VMS_IA64_DECCXX</td>
98 <td> </td>
99 </tr>
100 </table>
101 </ul>
102
103 <h2>Proposed Solution</h2>
104
105 <h3>Security Considerations</h3>
106 denise.eckstein 1.1 <ol>
107 <li>
108 To avoid introducing security vulnerabilities, vendors must never
109 ship providers incompatible with the security assumptions used in
110 their deployment.
111 For example, providers designed for a single-user deployment that
112 don't perform authorization must not be shipped with a CIM Server
113 that expects the providers to perform authorization. Note that
114 this authorization burden is considerably lighter if the provider
115 is registered as 'run as requestor' and if the CIM Server enables
116 that feature. See <a href=
117 "http://www.openpegasus.org/pp/uploads/40/7197/SecurityGuidePEP.htm">
118 PEP#223 - Security Coding Guidelines</a> for additional
119 details.
120 </li>
121 <li>
122 Vendors should ensure they configure the CIM Server consistently
123 with the security requirements of their deployment.
124 </li>
125 </ol>
126
127 denise.eckstein 1.1 <h3>Terminology Notes</h3>
128 <ol>
129 <li>
130 In this document, the term "Not Set" is used to indicate
131 that the a value for the environment variable has not been defined.
132 "Set" is used to indicate that the value must be defined,
133 but the actual value of the variable is not checked.
134 </li>
135 </ol>
136
137 <h3>General Notes</h3>
138
139 <ol>
140 <li>
141 Not all functionality described in this document has achieved
142 "Green"status, please refer to the
143 <a href="http://www.openpegasus.org/page.tpl?CALLER=index.tpl&ggid=799">
144 OpenPegasus Project Feature Status </a>page for information on
145 the maturity level of OpenPegasus features.
146 </li>
147 <li>
148 denise.eckstein 1.1 To encourage testing of new functionality, recommendations for the
149 Development Build may include features that are not yet recommended
150 for Release Builds.
151 </li>
152 </ol>
153
154 <h3>Environment Variable Settings for <u>Building</u> OpenPegasus</h3>
155
156 <h4>Definitions</h4>
157
158 <h5>ICU_INSTALL</h5>
159 <ul>
160 <b>Description: </b>When set, points to the directory containing
161 the <a href="%20http:/oss.software.ibm.com/icu"> ICU(International
162 Components for Unicode)</a> installation. The 'include'
163 subdirectory is used to locate ICU header files at build time. The
164 'lib' subdirectory is used to locate ICU libraries at link
165 time.<br>
166 <b>Default Value: </b>Not Set<br>
167 <b>Recommended Value (Development Build): </b>Not Set<br>
168 <b>Recommended Value (Release Build): </b>Not Set<br>
169 denise.eckstein 1.1 <b>Required: </b>No. However, if PEGASUS_HAS_ICU is
170 set and ICU_INSTALL is not defined, the ICU libraries and header
171 files are expected to be installed in directories (e.g.,/usr/lib,
172 /usr/include) that are searched by default.<br>
173 <b>Considerations: </b>This environment variable is only used
174 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
175 additional details.
176 </ul>
177
178 <h5>ICU_NO_UPPERCASE_ROOT</h5>
179 <ul>
180 <b>Description: </b>If set, the messages in the root resource
181 bundle will NOT be capitalized. By default, the root resource
182 bundle is capitalized.<br>
183 <b>Default Value: </b>Not Set<br>
184 <b>Recommended Value (Development Build): </b>Not Set<br>
185 <b>Recommended Value (Release Build): </b>Not Set<br>
186 <b>Required: </b>No<br>
187 <b>Considerations: </b>This environment variable is only used
188 if PEGASUS_HAS_MESSAGES is set. Refer to PEGASUS_HAS_MESSAGES for
189 additional details.
190 denise.eckstein 1.1 </ul>
191
192 <h5>ICU_ROOT_BUNDLE_LANG</h5>
193 <ul>
194 <b>Description: </b>If set, specifies the language
195 to be used to generate the root resource bundle. The
196 default value for ICU_ROOT_BUNDLE_LANG is _en.<br>
197 <b>Default Value: </b>_en<br>
198 <b>Recommended Value (Development Build): </b>No
199 Recommendation<br>
200 <b>Recommended Value (Release Build): </b>No Recommendation<br>
201 <b>Required: </b>No<br>
202 <b>Considerations: </b>This environment variable is
203 only used if PEGASUS_HAS_MESSAGES is set. Refer to
204 PEGASUS_HAS_MESSAGES for additional details.<br>
205 If set, resource bundles for the designated language must
206 exist for the following files:
207 <ul>
208 <li>pegasus/src/Pegasus/msg/Server/pegasusServer_en.txt</li>
209 <li>pegasus/src/Pegasus/msg/Listener/pegasusListener_en.txt</li>
210 </ul>
211 denise.eckstein 1.1 </ul>
212
213
214 <h5>OPENSSL_BIN</h5>
215 <ul>
216 <b>Description: </b>Specifies the location of the
217 OpenSSL <i>binary</i> directory. <br>
218 <b>Default Value: </b>Not Set<br>
219 <b>Recommended Value (Development Build): </b>
220 No Specific Recommendation<br>
221 <b>Recommended Value (Release Build): </b>
222 No Specific Recommendation<br>
223 <b>Required: </b>No. By default, the openssl binary is
224 expected to be installed in a directory that is searched by default
225 (e.g., /usr/bin). For platforms where this isn't true, the
226 OPENSSL_BIN environment variable may be used to define an
227 alternative path. This environment variable is only used if
228 PEGASUS_HAS_SSL is set.
229 </ul>
230
231 <h5>OPENSSL_HOME</h5>
232 denise.eckstein 1.1 <ul>
233 <b>Description: </b>Specifies the location of the OpenSSL
234 SDK directory. This directory must contain the OpenSSL
235 <i>include</i> directory, $(OPENSSL_HOME)/include, and the OpenSSL
236 <i>library</i> directory, $(OPENSSL_HOME)/lib.<br>
237 <b>Default Value: </b>Not Set<br>
238 <b>Recommended Value (Development Build): </b>
239 No Specific Recommendation<br>
240 <b>Recommended Value (Release Build): </b>
241 No Specific Recommendation<br>
242 <b>Required: </b>Yes for Windows, if PEGASUS_HAS_SSL
243 is set. No for all other platforms. For AIX, the default
244 value for OPENSSL_HOME is /usr/linux. For all other
245 platforms, the OpenSSL include files and libraries are expected
246 to be installed in directories that are searched by default (e.g.,
247 /usr/bin, /usr/lib(64), and /usr/include).
248 For platforms where the default value is not correct, the
249 OPENSSL_HOME environment variable may be used to define an
250 alternative path (i.e., $(OPENSSL_HOME)/lib and
251 $(OPENSSL_HOME)/include). This environment variable
252 is only used if PEGASUS_HAS_SSL is set.
253 denise.eckstein 1.1 </ul>
254
255 <h5>PEGASUS_ALLOW_ABSOLUTEPATH_IN_PROVIDERMODULE</h5>
256 <ul>
257 <b>Description: </b>If set to true, a version of OpenPegasus
258 will be built that allows an absolute path to be specified as the
259 value of the Location property of PG_ProviderModule class.
260 Otherwise it does not allow the absolute path to be specified.<br>
261 <b>Default Value: </b>Not Set<br>
262 <b>Recommended Value (Development Build): </b>Not Set<br>
263 <b>Recommended Value (Release Build): </b>Not Set<br>
264 <b>Required: </b>No<p>
265 <b>Considerations: </b>To avoid introducing security
266 vulnerabilities, vendors should analyze their deployment
267 environments to understand the security implications of allowing
268 providers to be loaded from a dynamically changing set of
269 directories.<br>
270 </ul>
271
272 <h5>PEGASUS_CCOVER</h5>
273 <ul>
274 denise.eckstein 1.1 <b>Description: </b>This flag is currently only supported on
275 HP-UX. It is enabled on the Nightly Build & Test system,
276 HP-UX_11iv3_Integrity_C-Cover. This system is
277 used to generate the nightly BullseyeCoverage code coverage
278 metrics.<br>
279 <b>Default Value: </b>Not Set<br>
280 <b>Recommended Value (Development Build): </b>Not Set<br>
281 <b>Recommended Value (Release Build): </b>Not Set<br>
282 <b>Required: </b>No<br>
283 <b>Considerations: </b>This flag is only supported on HP-UX to enable
284 CCOVER for the NB&T system.<br>
285 </ul>
286
287 <h5>PEGASUS_CIM_SCHEMA</h5>
288 <ul>
289 <b>Description: </b>This variable is used internally by the
290 OpenPegasus development team when upgrading the OpenPegasus build
291 environment to a new version of the CIM Schema.<br>
292 <b>Default Value: </b>CIM217<br>
293 <b>Recommended Value (Development Build): </b>
294 No Specific Recommendation<br>
295 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>
296 No Specific Recommendation<br>
297 <b>Required: </b>No <br>
298 <b>Considerations:</b> Additional code changes may be required when
299 upgrading or downgrading the CIM Schema version.</p>
300 </ul>
301
302 <h5>PEGASUS_CLASS_CACHE_SIZE</h5>
303 <ul>
304 <b>Description: </b>This environment variable gives the size of
305 the class cache used by CIM repository. This variable defines the
306 size of the class cache (i.e., the maximum number of classes that
307 may be included). If this variable is set to 0, class caching is
308 disabled.<br>
309 <b>Default Value: </b>8<br>
310 <b>Recommended Value (Development Build): </b>8<br>
311 <b>Recommended Value (Release Build): </b>8<br>
312 <b>Required: </b>No </p>
313 </ul>
314
315 <h5>PEGASUS_DEBUG</h5>
316 denise.eckstein 1.1 <ul>
317 <b>Description: </b>Builds a debug version of OpenPegasus.
318 Concurrently, this flag controls a) enabling compiler specific
319 debug flags and b) the inclusion of debug-specific
320 functionality.<br>
321 <b>Default Value: </b>Not Set<br>
322 <b>Recommended Value (Development Build): </b>Set<br>
323 <b>Recommended Value (Release Build): </b>Not Set<br>
324 <b>Required: </b>No
325 </ul>
326
327 <h5>PEGASUS_DEFAULT_USERCTXT_REQUESTOR</h5>
328 <ul>
329 <b>Description: </b> If set to true, the <i>Requestor</i> user
330 context is used for providers that do not specify a UserContext
331 value in their registration. Otherwise, the <i>Privileged</i> user
332 context value is used by default. <br>
333 <b>Default Value: </b>false<br>
334 <b>Recommended Value (Development Build): </b>false<br>
335 <b>Recommended Value (Release Build): </b>false<br>
336 <b>Required: </b>No
337 denise.eckstein 1.1 <b>Considerations:</b> Use of the <i>Requestor</i> default has
338 improved provider security characteristics. However, some providers
339 may not operate correctly when run in the <i>Requestor</i> user
340 context and setting this value to true may cause those providers to
341 fail. Providers that can run in the <i>Requestor</i>
342 user context are encouraged to explicitly set the UserContext value
343 in their registration rather than rely on the default setting
344 default by this variable. Please refer to
345 SecurityGuidelinesForDevelopers.html. PEP 223 for a discussion
346 of the rationale/advantages of running providers in the
347 <i>Requestor </i> user context. <b>Note:</b> This build
348 variable is not meaningful if the Provider User Context feature is
349 disabled with the PEGASUS_DISABLE_PROV_USERCTXT
350 setting.
351 </ul>
352
353
354 <h5>PEGASUS_DEFAULT_ENABLE_OOP</h5>
355 <ul>
356 <b>Description: </b>When this variable is set to false, by
357 default, Providers are run in the cimserver process
358 denise.eckstein 1.1 (forceProviderProcesses=false). If this value is set true,
359 Providers are run out-of-process by default.<br>
360 <b>Default Value: </b>true for HP-UX and Linux, false for
361 other platforms<br>
362 <b>Recommended Value (Development Build): </b>true (HP-UX,
363 Linux)<br>
364 <b>Recommended Value (Release Build): </b>true (HP-UX,
365 Linux)<br>
366 <b>Required: </b>No<br>
367 <b>Considerations: </b>This environment variable can be used to
368 change the "hard-coded" default setting for the
369 forceProviderProcesses configuration value.
370 Refer to the definition of <b>forceProviderProcesses</b> for
371 additional information.
372 </ul>
373
374 <h5>PEGASUS_DEST_LIB_DIR</h5>
375 <ul>
376 <b>Description: </b>Specifies the location of OpenPegasus
377 shared libraries.<br>
378 <b>Default Value: </b>$(PEGASUS_HOME)/lib<br>
379 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>
380 $(PEGASUS_HOME)/lib<br>
381 <b>Recommended Value (Release Build): </b>
382 No Specific Recommendation <br>
383 <b>Required: </b>No<br>
384 <b>Considerations: </b>This variable is NOT is used to define
385 the location of the Provider library directories.
386 Please refer to the providerDir configuration option for details
387 on defining the directories for the Provider libraries.
388 </ul>
389
390
391 <h5>PEGASUS_DISABLE_DEPRECATED_INTERFACES</h5>
392 <ul>
393 <b>Description: </b>Removes deprecated symbol definitions
394 from OpenPegasus runtime libraries.<br>
395 <b>Default Value:</b> Not Set<br>
396 <b>Recommended Value (Development Build):</b> Not Set<br>
397 <b>Recommended Value (Release Build): </b>Not Set<br>
398 <b>Required: </b>No<br>
399 <b>Considerations: </b>If this option is set, the resulting
400 denise.eckstein 1.1 OpenPegasus libraries will not be binary compatible with
401 clients and providers built using interface definitions from
402 prior releases. This option may be used to slightly reduce binary
403 footprint in an environment where compatibility is not required.<br>
404 </ul>
405
406 <h5>PEGASUS_DISABLE_INSTANCE_QUALIFIERS</h5>
407 <ul>
408 <b>Description: </b>In the CIM Infrastructure Specification,
409 version 2.3, the DMTF clarified that instance-level qualifiers are
410 not allowed. In Version 1.2 of the Specification CIM
411 Operations over HTTP, use of the IncludeQualifiers parameter has
412 been DEPRECATED.<br>
413 <b>Default Value:</b> Not Set<br>
414 <b>Recommended Value (Development Build):</b> Not Set<br>
415 <b>Recommended Value (Release Build): </b>Not Set<br>
416 <b>Required: </b>No<br>
417 <b>Considerations: </b>Existing CIM Clients may depend on
418 qualifiers being returned in the response. In this case, the
419 PEGASUS_DISABLE_INSTANCE_QUALIFIERS should not be set.
420 If this flag is set, the value of the IncludeQualifiers parameter
421 denise.eckstein 1.1 passed on the GetInstance and EnumerateInstance operations is
422 ignored and qualifiers are not returned.
423 Disabling the return of qualifiers as part of a CIM Instance will
424 improve performance.<br>
425 </ul>
426
427 <h5>PEGASUS_DISABLE_LOCAL_DOMAIN_SOCKET</h5>
428 <ul>
429 <b>Description: </b>Disables support for local (same-system)
430 connections over a Unix domain socket. If this option is NOT set,
431 the CIM Server is built to allow connections to be established
432 using a domain socket rather than a TCP port.<br>
433 <b>Default Value: </b>Not Set <br>
434 <b>Recommended Value (Development Build): </b>Not Set<br>
435 <b>Recommended Value (Release Build): </b>Not Set<br>
436 <b>Required: </b>No<br>
437 <b>Considerations: </b>(1) In high-threat environments, a
438 customer may want to disable all ports or reduce the number of
439 exposed network ports. Supporting a local connection mechanism
440 using Unix domain socket allows the CIM Server to continue to
441 receive and process requests from local CIM Clients. (2)
442 denise.eckstein 1.1 Enabling this option may result in lose of functionality when
443 sslClientVerificationMode = required. (3)The
444 "LOCAL_DOMAIN_SOCKET" functionality has not been
445 implemented for Windows or OpenVMS. Therefore, by
446 default, this option is "Set" for Windows and OpenVMS
447 platforms.
448 </ul>
449
450 <h5>PEGASUS_DISABLE_PERFINST</h5>
451 <ul>
452 <b>Description: </b>Builds a version of OpenPegasus that
453 disables support for gathering performance data.<br>
454 <b>Default Value: </b>Not Set<br>
455 <b>Recommended Value (Development Build): </b>Not Set<br>
456 <b>Recommended Value (Release Build): </b>Set<br>
457 <b>Required: </b>No<br>
458 <b>Considerations: </b>The CIM_ObjectManager.GatherStatisticalData
459 property is used to control statistic gathering. Once enabled,
460 statistical data can be viewed by retrieving instances of the
461 CIM_StatisticalData class. Support for gathering performance
462 data requires PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
463 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
464 to false), then PEGASUS_DISABLE_PERFINST must be set to
465 true. If PEGASUS_DISABLE_PERFINST is not defined or set to
466 false and PEGASUS_ENABLE_INTEROP_PROVIDER is not set,
467 PEGASUS_ENABLE_INTEROP_PROVIDER will be automatically enabled.
468 </ul>
469
470 <h5>PEGASUS_DISABLE_PRIVILEGED_TESTS</h5>
471 <ul>
472 <b>Description: </b>This variable is used only in the development
473 environment to restrict the level of testing performed by default.
474 If set, tests that require the CIM Server to run in a privileged
475 mode will not be run. Setting this variable allows
476 developers, without privileged access, to successfully run a
477 subset of the OpenPegasus test suit. This variable does
478 not affect CIM Server functionality. It merely controls
479 the level of testing.<br>
480 <b>Default Value: </b>Not Set<br>
481 <b>Recommended Value (Development Build): </b>Not Set<br>
482 <b>Recommended Value (Release Build): </b>Not Used<br>
483 <b>Required: </b>No<br>
484 denise.eckstein 1.1 <b>Considerations: </b>Enabling this variable will significantly
485 reduce the testing of security related features (e.g.,
486 authentication and authorization) and can affect testing in other
487 areas.
488 </ul>
489
490 <h5>PEGASUS_DISABLE_PROV_USERCTXT</h5>
491 <ul>
492 <b>Description: </b>Builds a version of OpenPegasus that
493 disables supports for the Provider User Context feature.
494 This feature allows a Provider to choose the user context in
495 which it is invoked, including the ability to run in the context of
496 the user requesting an operation.<br>
497 <b>Default Value: </b>Set for Windows and OpenVMS, Not Set
498 for all other platforms<br>
499 <b>Recommended Value (Development Build): </b>Set for Windows and
500 OpenVMS, Not Set for all other platforms<br>
501 <b>Recommended Value (Release Build): </b>Set for Windows and
502 OpenVMS, Not Set for all other platforms<br>
503 <b>Required: </b>No<br>
504 <b>Considerations: </b>The Provider User Context feature may be
505 denise.eckstein 1.1 disabled by compiling with the PEGASUS_DISABLE_PROV_USERCTXT flag
506 defined. In this case, the Provider Registration Manager rejects
507 provider registration requests that specify a UserContext property
508 value. The user context in which providers run is then unchanged by
509 this enhancement. Some platforms, such as OS/400 and z/OS may
510 define the PEGASUS_DISABLE_PROV_USERCTXT as part of the platform
511 configuration, since these platforms already set the provider user
512 context on a per-thread basis. When the Provider User Context
513 feature is enabled, support for each of the User Context types may
514 be disabled individually. Provider registration fails when an
515 unsupported UserContext value is specified. Please refer to
516 SecurityGuidelinesForDevelopers.html / PEP 223 for a discussion of
517 the rationale/advantages of user context providers to many
518 platforms.<br>
519 </ul>
520
521 <h5>PEGASUS_EMANATE_INCLUDE_DIR</h5>
522 <ul>
523 <b>Description: </b>Specifies the location of the EMANATE
524 <i>include</i> directory. <br>
525 <b>Default Value: </b>Not Set<br>
526 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>
527 No Specific Recommendation<br>
528 <b>Recommended Value (Release Build): </b>
529 No Specific Recommendation<br>
530 <b>Required: </b>No. By default, the EMANATE include files
531 are expected to be installed in directories that are searched by
532 default (e.g., /usr/include). For platforms where this isn't true,
533 the PEGASUS_EMANATE_INCLUDE_DIR environment variable may be used to
534 define an alternative path. This environment variable is only used
535 if PEGASUS_USE_EMANATE is set.<br>
536 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
537 for additional details.<br>
538 </ul>
539
540 <h5>PEGASUS_EMANATE_LIB_DIR</h5>
541 <ul>
542 <b>Description: </b>Specifies the location of the EMANATE
543 <i>lib</i> directory. <br>
544 <b>Default Value: </b>Not Set<br>
545 <b>Recommended Value (Development Build): </b>
546 No Specific Recommendation<br>
547 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>
548 No Specific Recommendation<br>
549 <b>Required: </b>No. By default, the EMANATE libraries are
550 expected to be installed in directories that are searched by
551 default (e.g., /usr/lib, /usr/lib64). For platforms where this
552 isn't true, the PEGASUS_EMANATE_LIB_DIR environment variable may
553 be used to define an alternative path. This environment variable
554 is only used if PEGASUS_USE_EMANATE is set.<br>
555 <b>Considerations: </b>Refer to the description of PEGASUS_USE_EMANATE
556 for additional details.<br>
557 </ul>
558
559 <h5>PEGASUS_ENABLE_AUDIT_LOGGER</h5>
560 <ul>
561 <b>Description: </b>When this variable is set to false, support
562 for audit logging will NOT be built into OpenPegasus. If this
563 variable is set to true, or not set, support for audit logging
564 will be included in the build. All other values are invalid.<br>
565 <b>Default Value: </b>true<br>
566 <b>Recommended Value (Development Build): </b>true<br>
567 <b>Recommended Value (Release Build): </b>true<br>
568 denise.eckstein 1.1 <b>Required: </b>No<br>
569 </ul>
570
571
572 <h5>PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER</h5>
573 <ul>
574 <b>Description: </b>If set to true, a version of OpenPegasus
575 that supports CMPI providers and their dependent components is
576 built. If this variable is not set or set to false, support
577 for CMPI providers will not be included. <br>
578 <b>Default Value: </b>true for Linux and OpenVMS, false for
579 other platforms<br>
580 <b>Recommended Value (Development Build): </b>true (Linux
581 Platform Only)<br>
582 <b>Recommended Value (Release Build): </b>true (Linux Platform
583 Only)<br>
584 <b>Required: </b>No</p>
585 </ul>
586
587 <h5>PEGASUS_ENABLE_COMPRESSED_REPOSITORY</h5>
588 <ul>
589 denise.eckstein 1.1 <b>Description: </b>If set the Repository Compression logic is
590 built and enabled and compressed and non compressed repositories
591 are supported. If not set then compressed repositories are not
592 supported.<br>
593 <b>Default Value: </b>Not Set<br>
594 <b>Recommended Value (Development Build): </b>Not Set<br>
595 <b>Recommended Value (Release Build): </b>Not Set<br>
596 <b>Required: </b>No<p>
597 <b>Considerations: </b>See
598 pegasus/readme.compressed_repository</p>
599 </ul>
600
601
602 <h5>PEGASUS_ENABLE_CQL</h5>
603 <ul>
604 <b>Description: </b>When this variable is set to false, support
605 for Indication Subscription filters that have CQL as the language
606 is disabled. It does not remove CQL from the build.<br>
607 <b>Default Value:</b> Not Set<br>
608 <b>Recommended Value (Development Build):</b> Not Set<br>
609 <b>Recommended Value (Release Build):</b> false<br>
610 denise.eckstein 1.1 <b>Required: </b>No<br>
611 <b>Considerations: </b>The DMTF CIM Query Language
612 Specification is Preliminary and subject to backward incompatible
613 changes.
614 </ul>
615
616 <h5>PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT</h5>
617 <ul>
618 <b>Description: </b>When this variable is set to true, support the
619 DMTF Indications Profile (DSP1054) is included in OpenPegasus.
620 If this variable is not set or set to false, support for the DMTF
621 Indications Profile will not be included.<br>
622 <b>Default Value:</b> Not Set<br>
623 <b>Recommended Value (Development Build):</b> Not Set<br>
624 <b>Recommended Value (Release Build):</b> Not Set<br>
625 <b>Required: </b>No<br>
626 <b>Considerations: </b>The implementation of this feature is
627 based on a preliminary version of the DMTF Indications Profile,
628 DSP1053, and subject to change. If this variable is enabled,
629 two DMTF experimental class definitions, CIM_IndicationService and
630 CIM_IndicationServiceCapabilities, will be added to the
631 denise.eckstein 1.1 root/PG_InterOp namespace. Experimental class definitions are
632 subject to change.
633 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT requires
634 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled.
635 If PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
636 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT to true, will also
637 enable PEGASUS_ENABLE_INTEROP_PROVIDER. If
638 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled (i.e., set
639 to false), a build error will be generated.
640 </ul>
641
642 <h5>PEGASUS_ENABLE_EXECQUERY</h5>
643 <ul>
644 <b>Description: </b>When this environment variable is set,
645 processing of ExecQuery operations is enabled. When not set,
646 ExecQuery operation requests get a NotSupported response. (Note:
647 The PEGASUS_ENABLE_EXECQUERY environment variable controls
648 the definition of the PEGASUS_DISABLE_EXECQUERY compile macro.) <br>
649 <b>Default Value: </b>Not Set<br>
650 <b>Recommended Value (Development Build): </b>Not Set<br>
651 <b>Recommended Value (Release Build): </b>Not Set<br>
652 denise.eckstein 1.1 <b>Required: </b>No
653 </ul>
654
655 <h5>PEGASUS_ENABLE_EMAIL_HANDLER</h5>
656 <ul>
657 <b>Description: </b> When this environment variable is set, an
658 E-Mail Indication Handler is built as part of the OpenPegasus
659 build. The E-Mail Indication Handler can be used to
660 delivered CIM Indications to a designated e-mail address.<br>
661 <b>Default Value: </b>Not Set<br>
662 <b>Recommended Value (Development Build): </b>Not Set<br>
663 <b>Recommended Value (Release Build): </b>Not Set<br>
664 <b>Required: </b>No<br>
665 <b>Considerations: </b>If PEGASUS_ENABLE_EMAIL_HANDLER is
666 not set when OpenPegasus is built, a request to create an Email
667 Indication Handler instance will be rejected will the error
668 CIM_ERR_NOT_SUPPORTED.
669 </ul>
670
671 <h5>PEGASUS_ENABLE_GCOV</h5>
672 <ul>
673 denise.eckstein 1.1 <b>Description: </b>GCOV,
674 <a href="http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov">
675 http://gcc.gnu.org/onlinedocs/gcc/index.html#toc_Gcov</a>, is a
676 code coverage utility. If PEGASUS_ENABLE_GCOV is set,
677 GCC will instrument the code to support analysis by GCOV.<br>
678 <b>Default Value: </b>Not Set<br>
679 <b>Recommended Value (Development Build): </b>
680 Not Set<br>
681 <b>Recommended Value (Release Build): </b>Not Set<br>
682 <b>Required: </b>No<br><b>Considerations: </b>
683 This flag is currently only supported with GCC on Linux.
684 <ul>
685 Note: LCOV, <a href=
686 "http://ltp.sourceforge.net/coverage/lcov.php">
687 http://ltp.sourceforge.net/coverage/lcov.php</a>, is a
688 graphical front-end extension for GCOV. It collects GCOV data
689 for multiple source files and creates HTML pages with coverage
690 information. You can use the following steps to use LCOV to
691 analyze OpenPegasus GCOV data.
692 <ol>
693 <li>Set PEGASUS_ENABLE_GCOV = true.</li>
694 denise.eckstein 1.1 <li>Build and test OpenPegasus (e.g.,
695 <i>make -f pegasus/TestMakefile build
696 alltests</i>).</li>
697 <li>For each source directory,
698 <ul>
699 <li>copy the .gcda and .gcno files from the object
700 directory to the source directory (e.g.,
701 <i>cp build/obj/Pegasus/Common/*.gcda
702 src/Pegasus/Common/</i>);</li>
703 <li>execute the <b>lcov</b> command
704 (e.g.,
705 <i>lcov --directory src/Pegasus/Common/ --capture
706 --output-file result.info</i>) to build the result.info
707 file; and finally,</li>
708 <li>use the <b>genhtml</b> command to generate the .html
709 output (e.g., <i>genhtml result.info</i>). The
710 top .html file is named index.html.</li>
711 </ul>
712 </ol>
713 </ul>
714 </ul>
715 denise.eckstein 1.1
716 <h5>PEGASUS_ENABLE_INDICATION_COUNT</h5>
717 <ul>
718 <b>Description: </b>If true, the CIM
719 Server will be built to count the number of CIM indications
720 generated by providers and matched with subscriptions. If false
721 or not set, indication statistic support will not be included.
722 <b>Default Value: </b>true<br>
723 <b>Recommended Value (Development Build): </b>true <br>
724 <b>Recommended Value (Release Build): </b>true <br>
725 <b>Required: </b>No <br>
726 <b>Considerations: </b>The number of CIM indications generated by
727 providers and matched with subscriptions is stored in hash tables
728 which causes memory usage to increase by 4 bytes for each
729 active subscription and by about 400 bytes for each active
730 indication provider.<br>
731 </ul>
732
|
733 mike 1.10 <h5>PEGASUS_ENABLE_PROTOCOL_INTERNAL_BINARY</h5>
|
734 mike 1.8 <ul>
735 <b>Description: </b>If true, OpenPegasus uses a faster binary
736 protocol between the CIM server and provider manager. If false,
737 OpenPegasus uses the older XML-based protocol instead.
738 <br>
739 <b>Default Value: </b>true<br>
740 <b>Recommended Value (Development Build): </b>true<br>
741 <b>Recommended Value (Release Build): </b>true<br>
742 <b>Required: </b>No<br>
743 <b>Considerations: </b>This option improves performance by optimizing the
744 serialization and deserialization of messages between the server and
|
745 mike 1.10 out-of-process providers.
746 <br>
747 </ul>
748
749 <h5>PEGASUS_ENABLE_PROTOCOL_BINARY</h5>
750 <ul>
751 <b>Description: </b>If true, OpenPegasus uses a faster binary
752 protocol between local clients (including the provider agent) and the
753 CIM server. If false, OpenPegasus uses the conventional XML-based protocol
754 instead. See PEP#340 for more details.
755 <br>
756 <b>Default Value: </b>false<br>
757 <b>Recommended Value (Development Build): </b>false<br>
758 <b>Recommended Value (Release Build): </b>false<br>
759 <b>Required: </b>No<br>
760 <b>Considerations: </b>This option improves performance by using a faster
761 binary protocol between local clients and the CIM server.
|
762 mike 1.8 <br>
763 </ul>
764
|
765 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_INTEROP_PROVIDER</h5>
766 <ul>
767 <b>Description: </b>If true, the OpenPegasus Interop Provider
768 will be build. If false or not set, the OpenPegasus Interop
769 Provider will not be built.<br>
770 <b>Default Value: </b>Not Set<br>
771 <b>Recommended Value (Development Build): </b>Not Set<br>
772 <b>Recommended Value (Release Build): </b>false<br>
773 <b>Required: </b>No <br>
774 <b>Considerations: </b> A number of features controlled by
775 OpenPegasus build options are dependent on the Interop
776 Provider. Please refer to PEGASUS_ENABLE_SLP,
777 PEGASUS_DISABLE_PERFINST, and
778 PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT for additional
779 details.<br>
780 </ul>
781
782 <h5>PEGASUS_ENABLE_IPV6</h5>
783 <ul>
784 <b>Description: </b>This variable can be used to specify
785 whether IPv6 support should be included in OpenPegasus.<br>
786 denise.eckstein 1.1 <b>Default Value: </b>true<br>
787 <b>Recommended Value (Development Build): </b>true<br>
788 <b>Recommended Value (Release Build): </b>true<br>
789 <b>Required: </b>No<br>
790 <b>Considerations: </b>When this variable is set to
791 'false', support for IPv6 socket APIs and structures is disabled,
792 and the CIM Server will not accept connections to or from IPv6
793 network interfaces. When this variable is set to 'true', the
794 newer IPv6 socket APIs and structures will be included when
795 OpenPegasus is built, so they must be supported on the build
796 platform. However, if IPv6 is not supported on the platform on
797 which an IPv6-enabled version of OpenPegasus is run, then the IPv6
798 feature will be disabled at run-time and only IPv4 connections
799 will be supported.
800 </ul>
801
802 <h5>PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER</h5>
803 <ul>
804 <b>Description: </b>If true, a version of OpenPegasus that
805 supports JMPI providers and their dependent components is built.
806 If false or not set, support for JMPI Providers is not included
807 denise.eckstein 1.1 in OpenPegasus. All other values are invalid.<br>
808 <b>Default Value: </b>false<br>
809 <b>Recommended Value (Development Build): </b>false<br>
810 <b>Recommended Value (Release Build): </b>false<br>
811 <b>Required: </b>No</p>
812 </ul>
813
814 <h5>PEGASUS_ENABLE_OBJECT_NORMALIZATION</h5>
815 <ul>
816 <b>Description: </b>If set, builds in support so that objects
817 returned from provider instance operations can be validated.
818 The enableNormalization must also be set to 'true' (default)<br>
819 <b>Default Value: </b>Not Set<br>
820 <b>Recommended Value (Development Build): </b>Not Set<br>
821 <b>Recommended Value (Release Build): </b>Not Set<br>
822 <b>Required: </b>No <br>
823 <b>Considerations: </b>If PEGASUS_ENABLE_OBJECT_NORMALIZATION is
824 set, two new configuration options are defined: enableNormalization
825 and excludeModulesFromNormalization.
826 </ul>
827
828 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_PRIVILEGE_SEPARATION</h5>
829 <ul>
830 <b>Description: </b>If true, a version of OpenPegasus that
831 enables the Privilege Separation feature is built. This feature
832 allows the CIM Server to run in a non-privileged user context and
833 use a small executor process to perform privileged operations. If
834 false or not set, the Privilege Separate feature will not be
835 included.<br>
836 <b>Default Value: </b>false<br>
837 <b>Recommended Value (Development Build): </b>true (HP-UX,
838 Linux)<br>
839 <b>Recommended Value (Release Build): </b>true (HP-UX,
840 Linux)<br>
841 <b>Required: </b>No<br>
842 <b>Considerations: </b> The Privilege Separation feature is
843 only supported on HP-UX and Linux platforms. The 'cimsrvr' user
844 must be defined on the system. If the umask setting in the
845 environment is not 0, PEGASUS_TMP must be set to a directory that
846 is writable by the 'cimsrvr' user for the tests to run
847 successfully.
848 </ul>
849 denise.eckstein 1.1
850 <h5>PEGASUS_ENABLE_PROTOCOL_WSMAN</h5>
851 <ul>
852 <b>Description: </b>If true, a version of OpenPegasus is
853 built that accepts and processes WS-Management requests. This
|
854 kumpf 1.5 feature is initially limited to WS-Transfer and WS-Enumeration
855 operations. If false or not set, WS-Management support is not
856 built or included in any way.<br>
|
857 denise.eckstein 1.1 <b>Default Value: </b>false<br>
858 <b>Recommended Value (Development Build): </b>true<br>
859 <b>Recommended Value (Release Build): </b>false<br>
860 <b>Required: </b>No<br>
861 <b>Considerations: </b> The WS-Management standards are not
862 mature, and interoperability problems may arise. The WS-Management
863 functionality may change in incompatible ways in subsequent
864 releases. Also note the known limitations specified in PEP 311.<br>
865 </ul>
866
867 <h5>PEGASUS_ENABLE_REMOTE_CMPI</h5>
868 <ul>
869 <b>Description: </b>If set, a version of OpenPegasus that
870 support Remote CMPI providers and their dependent components
871 is built.<br>
872 <b>Default Value: </b>Not Set<br>
873 <b>Recommended Value (Development Build): </b>Not Set<br>
874 <b>Recommended Value (Release Build): </b>Not Set<br>
875 <b>Required: </b>No</p>
876 </ul>
877
878 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_SLP</h5>
879 <ul>
880 <b>Description: </b>This variable controls of the inclusion
881 of SLP functionality in the OpenPegasus build. When this
882 environment variable is set to 'true', SLP functionality will be
883 included as part of the OpenPegasus build. If
884 this variable is set to 'false' or not set, the SLP functionality
885 will not be included. All other values are considered
886 invalid and will result in a build error
887 (e.g., "PEGASUS_ENABLE_SLP ($(PEGASUS_ENABLE_SLP)) invalid,
888 must be true or false").<br>
889 <b>Default Value: </b>'true' for Windows; 'false' for all other
890 Platforms<br>
891 <b>Recommended Value (Development Build): </b>'true' for
892 Windows; 'false' for all other Platforms<br>
893 <b>Recommended Value (Release Build): </b><br>
894 <b>Required: </b>No<br>
895 <b>Considerations: </b>PEGASUS_ENABLE_SLP requires
896 PEGASUS_ENABLE_INTEROP_PROVIDER to be enabled. If
897 PEGASUS_ENABLE_INTEROP_PROVIDER is not set, setting
898 PEGASUS_ENABLE_SLP to true, will also enable
899 denise.eckstein 1.1 PEGASUS_ENABLE_INTEROP_PROVIDER. If
900 PEGASUS_ENABLE_INTEROP_PROVIDER is explicitly disabled
901 (i.e., set to false), a build error will be generated.<br>
902 </ul>
903
904
905 <h5>PEGASUS_ENABLE_SORTED_DIFF</h5>
906 <ul>
907 <b>Description: </b>This controls if the DIFFSORT function
908 is used rather than a simple DIFF of the test results files
909 to the static results file. Set to 'true' enables the sorted
910 diffs of results to static results files. Otherwise results
911 in regular diffs of results to static results files.
912 See OpenPegasus bug 2283 for background information concerning
913 this config variable. <br>
914 <b>Default Value: </b>true<br>
915 <b>Recommended Value (Development Build): </b>true<br>
916 <b>Recommended Value (Release Build): </b>true<br>
917 <b>Required: </b>No<p> </p>
918 </ul>
919
920 denise.eckstein 1.1 <h5>PEGASUS_ENABLE_SYSTEM_LOG_HANDER</h5>
921 <ul>
922 <b>Description: </b>When this environment variable is set, a
923 SysLog Indication Handler is built as part of the OpenPegasus
924 build. The SysLog Indication Handler can be used to
925 delivered CIM Indications to the system log file.<br>
926 <b>Default Value: </b>Not Set<br>
927 <b>Recommended Value (Development Build): </b>Not Set<br>
928 <b>Recommended Value (Release Build): </b>Not Set<br>
929 <b>Required: </b>No<br>
930 <b>Considerations: </b>If PEGASUS_ENABLE_SYSTEM_LOG_HANDLER
931 is not set when OpenPegasus is built, a request to create a SysLog
932 Indication Handler instance will be rejected with the error
933 CIM_ERR_NOT_SUPPORTED.<br>
934 </ul>
935
936 <h5>PEGASUS_ENABLE_SSLV2</h5>
937 <ul>
938 <b>Description: </b>By default, support for the SSLV2 protocol
939 is disabled in OpenPegasus. The option can be used to build a
940 version of OpenPegasus that supports SSLV2. This variable affects
941 denise.eckstein 1.1 how SSL contexts are constructed for both the CIM Server and CIM
942 Clients.<br>
943 <b>Default Value: </b>Not Set<br>
944 <b>Recommended Value (Development Build): </b>Not Set<br>
945 <b>Recommended Value (Release Build): </b>Not Set<br>
946 <b>Required: </b>No<br>
947 <b>Considerations:</b> Unless SSLV2 is required for backward
948 compatibility, enabling this protocol is not recommended (SSLV3
949 or later is preferred).
950 </ul>
951
952 <h5>PEGASUS_ENABLE_USERGROUP_AUTHORIZATION</h5>
953 <ul>
954 <b>Description: </b>Builds a version of OpenPegasus that
955 allows an administrator to restrict access to CIM operations
956 to members of a designated set of groups. Refer to the
957 <b>authorizedUserGroups</b>configuration option for additional
958 details.<br>
959 <b>Default Value: </b>Not Set<br>
960 <b>Recommended Value (Development Build): </b>Not Set<br>
961 <b>Recommended Value (Release Build): </b>Set<br>
962 denise.eckstein 1.1 <b>Required: </b>No<br>
963 </ul>
964
965 <h5>PEGASUS_EXTRA_C_FLAGS</h5>
966 <ul>
967 <b>Description: </b>This environment variable allows a
968 developer to specify an additional set of flags to be included
969 on the C compile command line.<br>
970 <b>Default Value: </b>Not Set<br>
971 <b>Recommended Value (Development Build): </b>No Set<br>
972 <b>Recommended Value (Release Build): </b>Not Set<br>
973 <b>Required: </b>No
974 </ul>
975
976 <h5>PEGASUS_EXTRA_CXX_FLAGS</h5>
977 <ul>
978 <b>Description: </b>This environment variable allows a
979 developer to specify an additional set of flags to be included
980 on the C++ compile command line.<br>
981 <b>Default Value: </b>Not Set<br>
982 <b>Recommended Value (Development Build): </b>Not Set<br>
983 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>Not Set<br>
984 <b>Required: </b>No
985 </ul>
986
987 <h5>PEGASUS_EXTRA_LIBRARY_LINK_FLAGS</h5>
988 <ul>
989 <b>Description: </b>This environment variable allows a
990 developer to specify an additional set of flags to include on
991 the link command line used to build a library.<br>
992 <b>Default Value: </b>Not Set<br>
993 <b>Recommended Value (Development Build): </b>Not Set<br>
994 <b>Recommended Value (Release Build): </b>Not Set<br>
995 <b>Required: </b>No
996 </ul>
997
998 <h5>PEGASUS_EXTRA_LINK_FLAGS</h5>
999 <ul>
1000 <b>Description: </b>This environment variable allows a
1001 developer to specify an additional set of flags to be included
1002 on the link command line. These flags will be included on
1003 both library and program executable link command lines.<br>
1004 denise.eckstein 1.1 <b>Default Value: </b>Not Set<br>
1005 <b>Recommended Value (Development Build): </b>Not Set<br>
1006 <b>Recommended Value (Release Build): </b>Not Set<br>
1007 <b>Required: </b>No
1008 <b>Considerations: </b>Refer to PEGASUS_EXTRA_LIBRARY_LINK_FLAGS and
1009 PEGASUS_EXTRA_PROGRAM_FLAGS to add flags specific to either a
1010 library or program link command line.<br>
1011 </ul>
1012
1013 <h5>PEGASUS_EXTRA_PROGRAM_LINK_FLAGS</h5>
1014 <ul>
1015 <b>Description: </b>This environment variable allows a
1016 developer to specify an additional set of flags to include on
1017 the link command line used to build an executable program.<br>
1018 <b>Recommended Value (Development Build): </b>Not Set<br>
1019 <b>Recommended Value (Release Build): </b>Not Set<br>
1020 <b>Required: </b>No
1021 </ul>
1022
1023 <h5>PEGASUS_HAS_MESSAGES</h5>
1024 <ul>
1025 denise.eckstein 1.1 <b>Description: </b>When set (to anything) during the build,
1026 OpenPegasus compiles with localization support. The
1027 ICU (International Components for Unicode) variables,
1028 ICU_ROOT and ICU_INSTALL, indicate that the
1029 localization support is based on ICU. Only ICU is supported
1030 at this time.<br>
1031 <b>Default Value: </b>Not Set<br>
1032 <b>Recommended Value (Development Build): </b>Not Set<br>
1033 <b>Recommended Value (Release Build): </b>Not Set<br>
1034 <b>Required: </b>No<br>
1035 <b>Considerations: </b>If the PEGASUS_HAS_MESSAGES is not
1036 set, OpenPegasus is built without localization support. This
1037 means that all messages sent by the CIM Server and the CLIs are in
1038 English. ICU is an open source project at
1039 <a href="http://oss.software.ibm.com/icu">
1040 http://oss.software.ibm.com/icu</a>.
1041 Only English translations are included with the OpenPegasus
1042 distribution. The OpenPegasus distribution does not provide
1043 translated messages. But, enabling for ICU would allow vendor to
1044 provide the translations. Refer to the OpenPegasus Release README
1045 for additional information regarding the use of ICU. Although, in
1046 denise.eckstein 1.1 OpenPegasus 2.3.2, experience with localization support
1047 has been limited to a select set of platforms, wider platform
1048 adoption of this technology is planned for 2.5.<br>
1049 </ul>
1050
1051 <h5>PEGASUS_HAS_SSL</h5>
1052 <ul>
1053 <b>Description: </b>If set, a version of OpenPegasus that
1054 supports SSL (i.e., https) is built.<br>
1055 <b>Default Value: </b>Not Set<br>
1056 <b>Recommended Value (Development Build): </b>Set<br>
1057 <b>Recommended Value (Release Build): </b>Set<br>
1058 <b>Required: </b>No<br>
1059 <b>Considerations: </b>Support for SSL in OpenPegasus is
1060 dependent on the OpenSSL software developed by the
1061 <a href="http://www.openssl.org/">
1062 OpenSSL Project (http://www.openssl.org/)</a>.
1063
1064 If the PEGASUS_HAS_SSL variable is set, the variable OPENSSL_HOME
1065 must also be defined. The OPENSSL_HOME variable is used, by the
1066 OpenPegasus build, to determine the location of the OpenSSL
1067 denise.eckstein 1.1 include files, libraries and binaries.
1068 </ul>
1069
1070 <h5>PEGASUS_HOME</h5>
1071 <ul>
1072 <b>Description: </b>Specifies the location of the
1073 OpenPegasus working directory. The OpenPegasus
1074 build will use this directory as the default location
1075 for files generated during the build (e.g., binaries,
1076 libraries, objects).<br>
1077 <b>Default Value: </b>None<br>
1078 <b>Recommended Value (Development Build): </b>
1079 No Specific Recommendation<br>
1080 <b>Recommended Value (Release Build): </b>
1081 No Specific Recommendation<br>
1082 <b>Required: </b>Yes<br>
1083 <b>Considerations: </b>The error "PEGASUS_HOME
1084 environment variable undefined" is returned if the
1085 PEGASUS_HOME environment variable is not set.
1086 This variable is also used during runtime. Refer to the section
1087 titled "Environment Variable Settings for Running OpenPegasus
1088 denise.eckstein 1.1 2.3.2 on Linux" for additional details.<br>
1089 </ul>
1090
1091 <h5>PEGASUS_INDICATIONS_Q_THRESHOLD</h5>
1092 <ul>
1093 <b>Description: </b>Controls if indications providers are stalled
1094 if the indications service queue is too large. It can be set
1095 to any positive value. If not set providers are never
1096 stalled. This implies that the indications service
1097 queue may become as large as necessary to hold all the
1098 indications generated. If set to any value then
1099 providers are stalled by forcing them to sleep when they
1100 try to deliver an indication and the indications service
1101 queue exceeds this value. They are resumed when the queue
1102 count falls 10 percent below this value. Stall and resume log
1103 entries are made to inform the administrator the condition has
1104 occurred.<br>
1105 <b>Default Value: </b>Not Set<br>
1106 <b>Recommended Value (Development Build): </b>Not Set<br>
1107 <b>Recommended Value (Release Build): </b>Not Set<br>
1108 <b>Required: </b>No<br>
1109 denise.eckstein 1.1 <b>Considerations: </b>Use of this setting may have
1110 unintended side-effects when using Out-of-Process Providers
1111 including delayed processing of CIM Operation Requests.
1112 </ul>
1113
1114 <h5>PEGASUS_MAX_THREADS_PER_SVC_QUEUE</h5>
1115 <ul>
1116 <b>Description: </b>Controls the maximum number of threads
1117 allowed per message service queue. It is allowed to range
1118 between 1 and MAX_THREADS_PER_SVC_QUEUE_LIMIT (currently 5000)
1119 as set in pegasus/src/Pegasus/Common/MessageQueueService.cpp.
1120 If set to 0 (zero) the max threads per service queue is then
1121 set to MAX_THREADS_PER_SVC_QUEUE_LIMIT. If set larger than the
1122 MAX_THREADS_PER_SVC_QUEUE_LIMIT it is set equal to
1123 MAX_THREADS_PER_SVC_QUEUE_LIMIT. There are no other limits on the
1124 total number of threads that can exist within the system at this
1125 time. When the server starts there on the order of 10 to 20
1126 message service queues created dependent upon
1127 build options. <br>
1128 <b>Default Value: </b>5<br>
1129 <b>Recommended Value (Development Build): </b>5<br>
1130 denise.eckstein 1.1 <b>Recommended Value (Release Build): </b>5<br>
1131 <b>Required: </b>No<br>
1132 <b>Considerations: </b>This flag affects consumption of
1133 system resources. Not setting, or inappropriately setting
1134 this value, may cause the cimserver to hang or crash.<br>
1135 </ul>
1136
1137 <h5>PEGASUS_ROOT</h5>
1138 <ul>
1139 <b>Description: </b>Specifies the location of the directory
1140 that corresponds to "pegasus" source directory defined in the
1141 OpenPegasus CVS source tree. This environment variable is
1142 used by the OpenPegasus build to locate the required build
1143 and source files (e.g., $(PEGASUS_ROOT)/mak and
1144 $(PEGASUS_ROOT)/src).<br>
1145 <b>Default Value: </b>None<br>
1146 <b>Recommended Value (Development Build): </b>
1147 No Specific Recommendation<br>
1148 <b>Recommended Value (Release Build): </b>
1149 No Specific Recommendation<br>
1150 <b>Required: </b>Yes<br>
1151 denise.eckstein 1.1 <b>Considerations: </b>The error "PEGASUS_ROOT environment
1152 variable undefined" is returned if the PEGASUS_ROOT
1153 environment variable is not set.
1154 </ul>
1155
1156
1157 <h5>PEGASUS_NET_SNMP_INCLUDE_DIR</h5>
1158 <ul>
1159 <b>Description: </b>Specifies the location of the NET-SNMP
1160 <i>include</i> directory. <br>
1161 <b>Default Value: </b>Not Set<br>
1162 <b>Recommended Value (Development Build): </b>
1163 No Specific Recommendation<br>
1164 <b>Recommended Value (Release Build): </b>
1165 No Specific Recommendation<br>
1166 <b>Required: </b>No. By default, the NET-SNMP include
1167 files are expected to be installed in directories that
1168 are searched by default (e.g., /usr/include). For platforms
1169 where this isn't true, the PEGASUS_NET_SNMP_INCLUDE_DIR
1170 environment variable may be used to define an alternative path.
1171 This environment variable is only used if PEGASUS_USE_NET_SNMP
1172 denise.eckstein 1.1 is set.<br>
1173 </ul>
1174
1175 <h5>PEGASUS_NET_SNMP_LIB_DIR</h5>
1176 <ul>
1177 <b>Description: </b>Specifies the location of the NET-SNMP
1178 <i>lib </i>directory. <br>
1179 <b>Default Value: </b>Not Set<br>
1180 <b>Recommended Value (Development Build): </b>
1181 No Specific Recommendation<br>
1182 <b>Recommended Value (Release Build): </b>
1183 No Specific Recommendation<br>
1184 <b>Required: </b>No. By default, the NET-SNMP library is
1185 expected to be installed in a directory that is searched by
1186 default (e.g., /usr/lib, /usr/lib64). For platforms where
1187 this isn't true, the PEGASUS_NET_SNMP_LIB_DIR environment
1188 variable may be used to define an alternative path. This
1189 environment variable is only used if PEGASUS_USE_NET_SNMP is set.
1190 </ul>
1191
1192
1193 denise.eckstein 1.1 <h5>PEGASUS_NOASSERTS</h5>
1194 <ul>
1195 <b>Description: </b>Defines the NDEBUG compilation macro, which
1196 causes the preprocessor to remove PEGASUS_ASSERT() statements.<br>
1197 <b>Default Value: </b>Not Set<br>
1198 <b>Recommended Value (Development Build): </b>Not Set<br>
1199 <b>Recommended Value (Release Build): </b>Set<br>
1200 <b>Required: </b>No<br>
1201 </ul>
1202
1203 <h5>PEGASUS_OPENSLP_HOME</h5>
1204 <ul>
1205 <b>Description: </b>Specifies the location of the OpenSLP
1206 SDK directory. This directory must contain the OpenSLP
1207 <i>include</i> directory, $(PEGASUS_OPENSLP_HOME)/include,
1208 and the OpenSLP <i>library</i> directory,
1209 $(PEGASUS_OPENSLP_HOME)/lib.<br>
1210 <b>Default Value: </b>Not Set<br>
1211 <b>Recommended Value (Development Build): </b>
1212 No Specific Recommendation<br>
1213 <b>Recommended Value (Release Build): </b>
1214 denise.eckstein 1.1 No Specific Recommendation<br>
1215 <b>Required: </b>No. If not set, no additional include or
1216 library search paths will be included.
1217 <b>Considerations: </b>This value is not used if PEGASUS_USE_OPENSLP
1218 is not defined. <br>
1219 </ul>
1220
1221 <h5>PEGASUS_PAM_AUTHENTICATION</h5>
1222 <ul>
1223 <b>Description: </b>Enables support for PAM-(Pluggable
1224 Authentication Modules) based authentication.<br>
1225 <b>Default Value: </b>Not Set<br>
1226 <b>Recommended Value (Development Build): </b>Set<br>
1227 <b>Recommended Value (Release Build): </b>Set<br>
1228 <b>Required: </b>No<br>
1229 <b>Considerations: </b>Support for PAM in OpenPegasus is
1230 dependent on platform support for PAM.<br>
1231 </ul>
1232
1233 <h5>PEGASUS_PLATFORM</h5>
1234 <ul>
1235 denise.eckstein 1.1 <b>Description: </b>Describes the target platform for the
1236 build. The list of supported values for this variable
1237 is defined in pegasus/mak/config.mak. Please refer to
1238 that file for a complete list of valid PEGASUS_PLATFORM
1239 values. This document includes platform-specific configuration
1240 data for only a subset of the supported platforms. The
1241 following table describes the platforms documented in
1242 this version of the document. <br>
1243 <b>Default Value: </b>None<p> </p>
1244 <table border="1" cellspacing="1" bordercolordark="#666666"
1245 bordercolorlight="#CCCCCC" width=542
1246 style='font-size=10.0pt;font-family:Arial'>
1247 <tr>
1248 <th bgcolor="#CAE6CA" width="190">Platform</th>
1249 <th bgcolor="#CAE6CA" width=351>Recommended Value <br>
1250 Development Build</th>
1251 <th bgcolor="#CAE6CA" width=338>Recommended Value <br>
1252 Release Build</th>
1253 </tr>
1254 <tr align="center">
1255 <td width="190" align="left">Linux IA32</td>
1256 denise.eckstein 1.1 <td width="351">LINUX_IX86_GNU</td>
1257 <td width="338">LINUX_IX86_GNU</td>
1258 </tr>
1259 <tr align="center">
1260 <td width="190" align="left">Linux IA64</td>
1261 <td width="351">LINUX_IA64_GNU</td>
1262 <td width="338">LINUX_IA64_GNU</td>
1263 </tr>
1264 <tr align="center">
1265 <td width="190" align="left">Linux X86_64</td>
1266 <td width="351">LINUX_X86_64_GNU</td>
1267 <td width="338">LINUX_X86_64_GNU</td>
1268 </tr>
1269 <tr align="center">
1270 <td width="190" align="left">HP-UX PA-RISC</td>
1271 <td width="351">HPUX_PARISC_ACC</td>
1272 <td width="338">HPUX_PARISC_ACC</td>
1273 </tr>
1274 <tr align="center">
1275 <td width="190" align="left">HP-UX IPF</td>
1276 <td width="351">HPUX_IA64_ACC</td>
1277 denise.eckstein 1.1 <td width="338">HPUX_IA64_ACC</td>
1278 </tr>
1279 <tr align="center">
1280 <td width="190" align="left">OpenVMS Alpha</td>
1281 <td width="351">VMS_ALPHA_DECCXX</td>
1282 <td width="338">VMS_ALPHA_DECCXX</td>
1283 </tr>
1284 <tr align="center">
1285 <td width="190" align="left">OpenVMS IA64</td>
1286 <td width="351">VMS_IA64_DECCXX</td>
1287 <td width="338"> VMS_IA64_DECCXX</td>
1288 </tr>
1289 </table>
1290 <br><br>
1291 <b>Required: </b>Yes<br>
1292 <b>Considerations: </b>The error "PEGASUS_PLATFORM
1293 environment variable undefined." is returned if the
1294 PEGASUS_PLATFORM environment variable is not set.
1295 </ul>
1296
1297 <h5>PEGASUS_REMOVE_METHODTRACE</h5>
1298 denise.eckstein 1.1 <ul>
1299 <b>Description: </b>If true, the CIM Server is compiled without
1300 method enter and exit trace statements. Trace Level 5 will
1301 continue to be accepted as a valid trace level but, without the
1302 method enter and exit trace statements, it will be equivalent to
1303 Trace Level 4. If PEGASUS_REMOVE_METHODTRACE is false or not set,
1304 method enter and exit trace statements are included. All
1305 other values are considered invalid and will result in a build
1306 error.<br>
1307 <b>Default Value: </b>Not Set<br>
1308 <b>Recommended Value (Development Build): </b>Not Set (The
1309 Considerations section gives guidance on when a different
1310 decision would be made.)<br>
1311 <b>Recommended Value (Release Build): </b>Not Set (The
1312 Considerations section gives guidance on when a different
1313 decision would be made.)<br>
1314 <b>Required: </b>No<br>
1315 <b>Considerations: </b>This option completely removes the
1316 method enter/exit trace statements from the generated object code.
1317 It defines the PEG_METHOD_ENTER and PEG_METHOD_EXIT macros
1318 to null statements. This helps to keep static code size small
1319 denise.eckstein 1.1 but reduces the serviceability of the CIM server.<br>
1320 </ul>
1321
1322
1323 <h5>PEGASUS_REPOSITORY_MODE</h5>
1324 <ul>
1325 <b>Description: </b>This variable defines the default mode
1326 used to create repositories that are constructed as part of the
1327 automated build tests. It does not affect the runtime
1328 environment. Valid values include: XML (causes
1329 the repository to be built in XML mode); BIN (causes
1330 the repository to be built in binary mode). Use cimconfig to
1331 modify the runtime environment.<br>
1332 <b>Default Value: </b>XML<br>
1333 <b>Recommended Value (Development Build): </b>XML<br>
1334 <b>Recommended Value (Release Build): </b>XML<br>
1335 <b>Required: </b>No<p> </p>
1336 </ul>
1337
|
1338 kumpf 1.2 <h5>PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES</h5>
1339 <ul>
1340 <b>Description: </b>This variable defines the default contents of a
1341 class definition in the repository store when a new repository is created.
1342 Specifically, when set to true, propagated elements are included in a
1343 class definition in the persistent store. The contents of a class
1344 definition returned from the repository interface is not affected by this
1345 option.<br>
1346 <b>Default Value: </b>false<br>
1347 <b>Recommended Value (Development Build): </b>false<br>
1348 <b>Recommended Value (Release Build): </b>false<br>
1349 <b>Required: </b>No<p> </p>
1350 <b>Considerations: </b>A repository which stores complete class
1351 definitions does not allow modifications to non-leaf classes or changes
1352 to a superclass designation. Complete classes use more storage space,
1353 often twice as much as local (incomplete) classes. Class retrieval may
1354 be more expensive when local classes are stored. No specific mechanism
1355 is available to change this setting in an existing repository.<br>
1356 </ul>
1357
|
1358 denise.eckstein 1.1 <h5>PEGASUS_SLP_REG_TIMEOUT</h5>
1359 <ul>
1360 <b>Description: </b>Most SLP implementations allow a lifetime
1361 value to be specified in the registration sent to the SLP SA or
1362 DA. The PEGASUS_SLP_REG_TIMEOUT build variable allows a lifetime
1363 (ie. timeout) value to be specified on the SLP registration, with
1364 a 're-registration' being sent to SLP at the same specified
1365 timeout interval. The purpose of this lifetime or timeout value
1366 is to avoid the accumulation of stale service information
1367 in the SA or DA.<br>
1368 <b>Default Value: </b>Undefined<br>
1369 <b>Recommended Value (Development Build): </b>Undefined<br>
1370 <b>Recommended Value (Release Build): </b>Undefined<br>
1371 <b>Required: </b>No<p><b>Example: </b>
1372 PEGASUS_SLP_REG_TIME=1440 (ie. 24 hours or 1 day)<br>
1373 <b>Considerations: </b>(1) The OpenPegasus internal SLP
1374 implementation does not support timeout registrations. This
1375 build option is useful, for example, if PEGASUS_USE_OPENSLP is
1376 defined. (2) Some SLP implementations may impose a
1377 maximum value for the lifetime parameter. For example, OpenSLP
1378 limits this value to SLP_LIFETIME_MAXIMUM (or 0xFFFF), and
1379 denise.eckstein 1.1 if this maximum value is passed to OpenSLP, then the timeout
1380 feature is disabled. Refer to the documentation of your SLP
1381 implementation for more information. (3) OpenPegasus will not
1382 do any validity checking on the specified value, either
1383 to determine if it is a valid positive integer or if it
1384 exceeds some maximum value.<br>
1385 </ul>
1386
1387 <h5>PEGASUS_SNIA_EXTENSIONS</h5>
1388 <ul>
1389 <b>Description: </b> This variable is used to enable a
1390 set of workarounds that support the use of OpenPegasus
1391 in the SNIA Test Environment.<br>
1392 <b>Default Value: </b>Not Set<br>
1393 <b>Recommended Value (Development Build): </b>Not Set<br>
1394 <b>Recommended Value (Release Build): </b>Not Set<br>
1395 <b>Required: </b>No<br>
1396 <b>Considerations: </b>The functionality enabled with this
1397 variable is experimental and subject to change.
1398 </ul>
1399
1400 denise.eckstein 1.1 <h5>PEGASUS_SKIP_MOST_TEST_DIRS</h5>
1401 <ul>
1402 <b>Description: </b>If set to true, this variable can be used
1403 to reduce the time required to build OpenPegasus by significantly
1404 reducing the number of tests that are built.<br>
1405 <b>Default Value: </b>Not Set<br>
1406 <b>Recommended Value (Development Build): </b>Not Set<br>
1407 <b>Recommended Value (Release Build): </b>Not Set<br>
1408 <b>Required: </b>No<br>
1409 <b>Considerations: </b>Setting this variable to true
1410 affects the behavior of all recursive make targets (e.g.,
1411 clean, depend, all, unittests, alltests, and slptests).
1412 Use of this variable with test-related targets (e.g., unittests,
1413 alltests and slptests) can produce unexpected results.
1414 To avoid creating an inconsistent PEGASUS_HOME directory,
1415 the PEGASUS_HOME directory (i.e., the OpenPegasus build
1416 directory) should be removed prior to enabling or disabling
1417 this variable. This variable should not be used to characterize
1418 the set of files to be packaged in a release build. Please
1419 refer to the Runtime Packaging Definition PEP for the release
1420 for a recommended list of files to be included in a release.
1421 denise.eckstein 1.1 </ul>
1422
1423 <h5>PEGASUS_TEST_ENABLE_DEBUG_TRACE</h5>
1424 <ul>
1425 <b>Description: </b>
1426 This variable is only used for testing. If set to true,
1427 Discarded data trace will be enabled by the install_run
1428 target of the src/Server/Makefile before running the
1429 OpenPegasus TestMakefile test suite. <br>
1430 <b>Default Value: </b>Not Set<br>
1431 <b>Recommended Value (Development Build): </b>Set<br>
1432 <b>Recommended Value (Release Build): </b>Not Set<br>
1433 <b>Required: </b>No<br>
1434 <b>Considerations: </b>
1435 This variable is useful in certain test environments to
1436 explicitly enable tracing to aid in better troubleshooting and
1437 detection of test failures (E.g. Test systems are experiencing
1438 test failures due to connection timeouts, lost indications
1439 etc).<br>
1440 </ul>
1441
1442 denise.eckstein 1.1 <h5>PEGASUS_TEST_ISGROUP_GROUP/PEGASUS_TEST_ISGROUP_USER_SUCCESS/PEGASUS_TEST_ISGROUP_USER_FAILURE</h5>
1443 <ul>
1444 <b>Description: </b>These variables are only used for testing.
1445 These variables allow the developer to define a valid group name,
1446 PEGASUS_TEST_ISGROUP_GROUP, a valid user name that is in the
1447 group, PEGASUS_TEST_ISGROUP_USER_SUCCESS, and an a valid user
1448 name that is not in the group, PEGASUS_TEST_ISGROUP_USER_FAILURE.
1449 These variables are only used for testing and NOT part of the
1450 release.<br>
1451 <b>Default Value(Windows):</b>
1452 Administrator/Administrators/Guest<br>
1453 <b>Default Value(Non-Windows): </b>root/root/guest<br>
1454 <b>Recommended Value (Development Build): </b>
1455 No Recommendation<br>
1456 <b>Recommended Value (Release Build): </b>Not Used<br>
1457 <b>Required: </b>No
1458 </ul>
1459
1460 <h5>PEGASUS_TEST_IPV6</h5>
1461 <ul>
1462 <b>Description: </b>This variable is only used for
1463 denise.eckstein 1.1 testing. If set to true, the IPv6-specific tests will
1464 be run as part of the "alltests" OpenPegasus
1465 TestMakefile test suite. If this variable is not set or set to
1466 false, the IPv6-specific tests will not be run. All
1467 other values are invalid.<br>
1468 <b>Default Value: </b>If PEGASUS_TEST_IPV6 is not defined,
1469 PEGASUS_TEST_IPV6 is set to the value of PEGASUS_ENABLE_IPV6.<br>
1470 <b>Recommended Value (Development Build): </b>Set to the value
1471 of PEGASUS_ENABLE_IPV6<br>
1472 <b>Recommended Value (Release Build): </b>Not Used<br>
1473 <b>Required: </b>No<br>
1474 <b>Considerations: </b>This variable is useful in certain
1475 test environments to explicitly disable running the IPv6
1476 tests (e.g., when running an IPv6-enabled version of
1477 OpenPegasus on an an IPv4 system).<br>
1478 </ul>
1479
1480 <h5>PEGASUS_TEST_SDK</h5>
1481 <ul>
1482 <b>Description: </b>This variable is only used for
1483 testing. It is used to control testing of the SDK
1484 denise.eckstein 1.1 sample providers and clients. If set, the setup, building and
1485 testing of the SDK samples is enabled as part of the
1486 OpenPegasus automated build and test.<br>
1487 <b>Default Value: </b>Not Set<br>
1488 <b>Recommended Value (Development Build): </b>Set<br>
1489 <b>Recommended Value (Release Build): </b>Not Used<br>
1490 <b>Required: </b>No
1491 </ul>
1492
1493 <h5>PEGASUS_TEST_USER_DEFINED</h5>
1494 <ul>
1495 <b>Description: </b>This variable is only used for testing.
1496 If this variable is set, the tests will assume that the
1497 PEGASUS_TEST_USER_ID and PEGASUS_TEST_USER_PASS variables
1498 defines a valid user/password pair and can be used for
1499 certificate-based authentication testing. These tests
1500 also assumes that "invalidUser" is not a valid
1501 user.<br>
1502 <b>Default Value: </b>Not Set<br>
1503 <b>Recommended Value (Development Build): </b>Set<br>
1504 <b>Recommended Value (Release Build): </b>Not Used<br>
1505 denise.eckstein 1.1 <b>Required: </b>No
1506 </ul>
1507
1508 <h5>PEGASUS_TEST_USER_ID/PEGASUS_TEST_USER_PASS</h5>
1509 <ul>
1510 <b>Description: </b>These variables are only used for
1511 testing. These variables allow the developer to define a
1512 valid, non-privileged user name and password
1513 on the test system that can be used as part of the OpenPegasus
1514 automated test scripts to perform authentication and
1515 authorization testing. These variables are only used for
1516 testing and NOT part of the release.<br>
1517 <b>Default Value: </b>guest/guest<br>
1518 <b>Recommended Value (Development Build): </b>
1519 No Recommendation<br>
1520 <b>Recommended Value (Release Build): </b>Not Used<br>
1521 <b>Required: </b>No<br>
1522 </ul>
1523
1524 <h5>PEGASUS_TEST_VALGRIND_LOG_DIR</h5>
1525 <ul>
1526 denise.eckstein 1.1 <b>Description: </b>
1527 This variable is currently only supported on Linux. It may be
1528 set to run regression tests under the
1529 <a href="http://www.valgrind.org/">Valgrind</a> memory
1530 checking tool. It must specify a directory for writing
1531 Valgrind log files. The file name format for a particular
1532 log is PEGASUS_TEST_VALGRIND_LOG_DIR/PROGRAM_NAME.pid.<br>
1533 <b>Default Value: </b>Not Set<br>
1534 <b>Recommended Value (Development Build): </b>Not Set<br>
1535 <b>Recommended Value (Release Build): </b>Not Set<br>
1536 <b>Required: </b>No<br>
1537 <b>Considerations: </b>This flag is only supported on Linux to
1538 enable running tests under Valgrind.<br>
1539 </ul>
1540
1541 <h5>PEGASUS_TMP</h5>
1542 <ul>
1543 <b>Description: </b>This variable is only used in a test
1544 environment. It can be used to define the directory that
1545 OpenPegasus test programs should use to store temporary files.<br>
1546 <b>Default Value: </b>"."<br>
1547 denise.eckstein 1.1 <b>Recommended Value (Development Build): </b>
1548 No Specific Recommendation<br>
1549 <b>Recommended Value (Release Build): </b>Not Used<br>
1550 <b>Required: </b>No<br>
1551 </ul>
1552
1553 <h5>PEGASUS_USE_DEBUG_BUILD_OPTIONS</h5>
1554 <ul>
1555 <b>Description: </b>The PEGASUS_DEBUG flag is used to control
1556 a variety of settings, including compile options, assertion
1557 enablement, method definitions for testing, and diagnostic
1558 output. The PEGASUS_USE_DEBUG_BUILD_OPTIONS variable
1559 can be used to enable just the compiler specific debug options
1560 (e.g., -g in g++) .<br>
1561 <b>Default Value: </b>Not Set<br>
1562 <b>Recommended Value (Development Build): </b>Set<br>
1563 <b>Recommended Value (Release Build): </b>Not Set<br>
1564 <b>Required: </b>No<br>
1565 <b>Considerations: </b>This variable is automatically set
1566 if PEGASUS_DEBUG is set.<br>
1567 </ul>
1568 denise.eckstein 1.1
1569 <h5>PEGASUS_USE_EMANATE</h5>
1570 <ul>
1571 <b>Description: </b>EMANATE,
1572 <a href="http://www.snmp.com/products/emanate.html">
1573 http://www.snmp.com/products/emanate.html</a>, is an SNMP Research
1574 International product that supports SNMPv1, SNMPv2c, and
1575 SNMPv3. If the PEGASUS_USE_EMANATE variable is defined,
1576 the OpenPegasus SNMP Handler will use the EMANATE libraries
1577 to send traps to the SNMP Management application.
1578 The EMANATE libraries are NOT included as part of OpenPegasus.<br>
1579 <b>Default Value: </b>Not Set<br>
1580 <b>Recommended Value (Development Build): </b>Not Set<br>
1581 <b>Recommended Value (Release Build): </b>Not Set<br>
1582 <b>Required: </b>No<p>
1583 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1584 PEGASUS_USE_EMANATE variable must be set for the SNMP
1585 Handler to be supported.<br>
1586 </ul>
1587
1588
1589 denise.eckstein 1.1 <h5>PEGASUS_USE_NET_SNMP</h5>
1590 <ul>
1591 <b>Description: </b>NET-SNMP,
1592 <a href="http://net-snmp.sourceforge.net">
1593 http://net-snmp.sourceforge.net</a>, is an OSS
1594 implementation of a suite of applications used to implement
1595 <a href="http://www.ietf.org/rfc/rfc1157.txt">SNMP v1</a>,
1596 <a href="http://www.ietf.org/rfc/rfc1901.txt">SNMP v2c</a> and
1597 <a href="http://www.ietf.org/rfc/rfc2571.txt">SNMP v3</a> using
1598 both IPv4 and IPv6. If the PEGASUS_USE_NET_SNMP
1599 variable is defined, the OpenPegasus SNMP Handler will use
1600 the NET-SNMP libraries to send traps to the SNMP Management
1601 application. The NET-SNMP libraries are NOT included
1602 as part of OpenPegasus.<br>
1603 <b>Default Value: </b>Not Set<br>
1604 <b>Recommended Value (Development Build): </b>Not Set<br>
1605 <b>Recommended Value (Release Build): </b>true for Linux,
1606 false for all other platforms<br>
1607 <b>Required: </b>No<p>
1608 <b>Considerations: </b>Either the PEGASUS_USE_NET_SNMP or
1609 PEGASUS_USE_EMANATE variable must be set for the SNMP
1610 denise.eckstein 1.1 Handler to be supported.<br>
1611 </ul>
1612
1613 <h5>PEGASUS_USE_OPENSLP</h5>
1614 <ul>
1615 <b>Description: </b>OpenSLP, <a href="http://www.openslp.org">
1616 http://openslp.org</a>, is an open-source implementation of
1617 Service Location Protocol. If the PEGASUS_USE_OPENSLP variable
1618 is defined, OpenPegasus will be built to use the OpenSLP
1619 implementation of SLP instead of the internal OpenPegasus
1620 implementation of SLP. The OpenSLP libaries are NOT included
1621 as part of OpenPegasus.
1622 <b>Default Value: </b>Not Set<br>
1623 <b>Recommended Value (Development Build): </b>Not Set<br>
1624 <b>Recommended Value (Release Build): </b>Not Set<br>
1625 <b>Required: </b>No<br>
1626 <b>Considerations: </b>PEGASUS_ENABLE_SLP must be defined
1627 if this variable is set.
1628 </ul>
1629
1630 <h5>PEGASUS_USE_PAM_STANDALONE_PROC</h5>
1631 denise.eckstein 1.1 <ul>
1632 <b>Description: </b>Moves the processing of PAM requests from
1633 the CIM Server process to a separate process managed by the
1634 CIM Server.<br>
1635 <b>Default Value: </b>Not Set<br>
1636 <b>Recommended Value (Development Build): </b>Set<br>
1637 <b>Recommended Value (Release Build): </b>Set<br>
1638 <b>Required: </b>No<br>
1639 <b>Considerations: </b>If PAM Authentication is enabled,
1640 the PAM API is used, during the processing of each request, to
1641 authenticate the client. This level of use makes the CIM Server
1642 extremely sensitive to memory leaks in the PAM library. In
1643 addition, certain PAM modules are not thread-safe. If your
1644 platform is experiencing problems with PAM Authentication,
1645 use of option may provide a work-around.
1646 PEGASUS_USE_PAM_STANDALONE_PROC requires
1647 PEGASUS_PAM_AUTHENTICATION to be set.<br>
1648 </ul>
1649
1650 <h5>PEGASUS_USE_RELEASE_CONFIG_OPTIONS</h5>
1651 <ul>
1652 denise.eckstein 1.1 <b>Description: </b>If set, OpenPegasus is built using
1653 the "Release Build" configuration options. By default,
1654 OpenPegasus is built using the "Development Build"
1655 configuration options.<br>
1656 <b>Default Value: </b>Not Set<br>
1657 <b>Recommended Value (Development Build): </b>Not Set<br>
1658 <b>Recommended Value (Release Build): </b>Set<br>
1659 <b>Required: </b>No<br>
1660 <b>Considerations: </b>(1)The
1661 PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a platform
1662 vendor to easily toggle between two sets of configurations
1663 options, a set of options tuned for the development/debug
1664 ("Development Build") environment and a set of options
1665 tuned for the production environment ("Release Build").
1666 Refer the section titled "Configuration Properties" for
1667 additional detail. (2) For each configuration
1668 variable, the "Recommended Value (Release Build)"
1669 value defines the recommended settings to use for a
1670 "Release Build". Please refer to the
1671 description of each variable for additional information.
1672 </ul>
1673 denise.eckstein 1.1
1674 <h5>PEGASUS_USE_RELEASE_DIRS</h5>
1675 <ul>
1676 <b>Description: </b>If set, OpenPegasus is built using
1677 the "Release Build" directory definitions. By default,
1678 OpenPegasus is built using the "Development Build"
1679 directory definitions.<br>
1680 <b>Default Value: </b>Not Set<br>
1681 <b>Recommended Value (Development Build): </b>Not Set<br>
1682 <b>Recommended Value (Release Build): </b>Set<br>
1683 <b>Required: </b>No<br>
1684 <b>Considerations: </b>
1685 The PEGASUS_USE_RELEASE_DIRS variable allows a platform
1686 vendor to easily toggle between two sets of directory
1687 definitions, a set tuned for the development/debug
1688 ("Development Build") environment and a set tuned for the
1689 production environment ("Release Build"). Refer the section
1690 titled "Configuration Properties" for additional detail.<br>
1691 </ul>
1692
|
1693 kumpf 1.6 <h5>PEGASUS_USE_SQLITE_REPOSITORY</h5>
1694 <ul>
1695 <b>Description: </b>If true, new repository stores are created
1696 using a SQLite database. Existing file-based stores will continue
1697 to be recognized and operate seamlessly.<br>
1698 <b>Default Value: </b>false<br>
1699 <b>Recommended Value (Development Build): </b>true<br>
1700 <b>Recommended Value (Release Build): </b>true<br>
1701 <b>Required: </b>No<br>
1702 <b>Considerations: </b>If PEGASUS_USE_SQLITE_REPOSITORY is set to true
1703 and SQLite files are not installed in default search locations,
1704 SQLITE_HOME must also be configured.
1705 PEGASUS_REPOSITORY_STORE_COMPLETE_CLASSES may not be set to true when
1706 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1707 </ul>
1708
|
1709 denise.eckstein 1.1 <h5>PEGASUS_USE_SYSLOGS</h5>
1710 <ul>
1711 <b>Description: </b>If set, OpenPegasus will be built
1712 to send log messages to the system logger (syslog).
1713 Otherwise, log messages will be sent to OpenPegasus
1714 specific log files.<br>
1715 <b>Recommended Value (Development Build): </b>Set<br>
1716 <b>Recommended Value (Release Build): </b>Set<br>
1717 <b>Required: </b>No<br>
1718 <b>Considerations: </b>This variable is currently
1719 not implemented as an environment variable. To use
1720 the option -DPEGASUS_USE_SYSLOGS must
1721 be explicitly included in the appropriate platform
1722 makefile (pegasus/mak/platform_*.mak).</ul>
1723
1724 <h5>PEGASUS_WINDOWS_SDK_HOME</h5>
1725 <ul>
1726 <b>Description: </b>This variable should be set to point
1727 to the Microsoft Platform SDK on Windows if using a compiler
1728 version < 1300 (i.e. VC6). If using VC7 or VC8, this flag
1729 does not need to be set, as the necessary libraries are already
1730 denise.eckstein 1.1 included.<br>
1731 <b>Recommended Value (Development Build): </b>
1732 No Specific Recommendation<br>
1733 <b>Recommended Value (Release Build): </b>
1734 No Specific Recommendation<br>
1735 <b>Required: </b>Yes, if building on Windows with a
1736 compiler version < 1300.<br>
1737 </ul>
1738
|
1739 kumpf 1.6 <h5>SQLITE_HOME</h5>
1740 <ul>
1741 <b>Description: </b>Specifies the location of the SQLite SDK directory.
1742 This directory must contain sqlite3.h in the $(SQLITE_HOME)/include
1743 directory, and libsqlite3 in the $(SQLITE_HOME)/lib directory.<br>
1744 <b>Default Value: </b>Not Set<br>
1745 <b>Recommended Value (Development Build): </b>
1746 No Specific Recommendation<br>
1747 <b>Recommended Value (Release Build): </b>
1748 No Specific Recommendation<br>
1749 <b>Required: </b>Yes, if PEGASUS_USE_SQLITE_REPOSITORY is set to true
1750 and the SQLite files are not installed in locations that are searched by
1751 default.<br>
1752 <b>Considerations: </b>This environment variable is only used if
1753 PEGASUS_USE_SQLITE_REPOSITORY is set to true.
1754 </ul>
1755
|
1756 denise.eckstein 1.1 <h4>Examples Building a Linux IA32 (#IA64) Development/Debug Version</h4>
1757 <ul>
1758 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1759 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1760 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1761 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1762 export PEGASUS_PAM_AUTHENTICATION=true<br>
1763 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1764 export PEGASUS_HAS_SSL=yes<br>
1765 export PEGASUS_DEBUG=TRUE<br>
1766 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1767 export PEGASUS_USE_SYSLOGS=true<br>
1768 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1769 </ul>
1770
1771 <h4>Building a Linux IA32 (#IA64) Production Release Version</h4>
1772 <ul>
1773 export PEGASUS_ROOT=/home/pegasusbld/pegasus<br>
1774 export PEGASUS_HOME=/home/pegasusbld/pegasus/build<br>
1775 export PEGASUS_PLATFORM=LINUX_IX86_GNU<br>
1776 #export PEGASUS_PLATFORM=LINUX_IA64_GNU<br>
1777 denise.eckstein 1.1 export PEGASUS_DISABLE_CQL=true <br>
1778 export PEGASUS_PAM_AUTHENTICATION=true <br>
1779 export PEGASUS_USE_PAM_STANDALONE_PROC=true<br>
1780 export PEGASUS_HAS_SSL=yes<br>
1781 export PEGASUS_USE_RELEASE_CONFIG_OPTIONS=true<br>
1782 export PEGASUS_USE_RELEASE_DIRS=true<br>
1783 export PEGASUS_NOASSERTS=true<br>
1784 export ENABLE_CMPI_PROVIDER_MANAGER=true<br>
1785 export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true<br>
1786 export PEGASUS_USE_SYSLOGS=true<br>
1787 export PATH=/home/pegasusbld:/home/pegasusbld/pegasus/build/bin:/usr/local/bin:$PATH<br>
1788 </ul>
1789
1790 <h3>Environment Variable Settings for <u>Running</u> OpenPegasus</h3>
1791
1792 <h4>Definitions</h4>
1793
1794 <h5>PEGASUS_HOME</h5>
1795 <ul>
1796 <b>Description: </b>There are multiple options for
1797 configuring the location of OpenPegasus runtime
1798 denise.eckstein 1.1 files (e.g., configuration files, libraries,
1799 repository, executables). If no other option is
1800 specified, OpenPegasus will attempt to use the value
1801 PEGASUS_HOME.<br>
1802 <b>Default Value: </b>"."<br>
1803 <b>Recommended Value (Development Build): </b>
1804 The same value defined at build time.<br>
1805 <b>Recommended Value (Release Build): </b>Not Set<br>
1806 <b>Required: </b>No<br>
1807 <b>Considerations: </b>Although this variable can be
1808 useful in a development environment use of this environment
1809 variable is not recommended in a production environment.
1810 Instead, the use of configuration properties to explicitly
1811 set the location of runtime files and directories is recommended.
1812 </ul>
1813
1814 <h5>PEGASUS_MSG_HOME</h5>
1815 <ul>
1816 <b>Description: </b>This value is not used by the CIM
1817 Server. The CIM Server uses the messageDir configuration
1818 parameter to locate the directory where the ICU resource bundles.
1819 denise.eckstein 1.1 However, CIM Client applications must rely on an alternative
1820 mechanism to locate this directory.<br>
1821 <b>Default Value: </b>if $PEGASUS_HOME is set then
1822 "$PEGASUS_HOME/msg" else "."<br>
1823 <b>Recommended Value (Development Build): </b>$PEGASUS_HOME/msg<br>
1824 <b>Recommended Value (Release Build): </b>Not Set <br>
1825 <b>Required: </b>No<br>
1826 </ul>
1827
1828 <h3>Configuration Properties</h3>
1829
1830 <h4>Notation</h4>
1831
1832 <p>This section describes the notation used to define the
1833 configuration properties.</p>
1834
1835 <ul>
1836
1837 <h5>Default Value</h5>
1838 The value of <i>Default Value</i> is the OpenPegasus
1839 default setting for this configuration option. This
1840 denise.eckstein 1.1 value is used if a platform-specific setting is not
1841 defined.
1842
1843 <h5>Recommended Default Value</h5>
1844 The PEGASUS_USE_RELEASE_CONFIG_OPTIONS variable allows a
1845 platform vendor to easily toggle between two sets of
1846 configurations options, a set of options tuned for the
1847 development/debug ("Development Build") environment
1848 and a set of options tuned for the production environment
1849 ("Release Build"). The value of
1850 <i>Recommended Value (Development Build)</i>
1851 is the recommended default value for use in a development/
1852 debug environment. The value of
1853 <i>Recommended Value (Release Build)</i> is the recommended
1854 default value for use in a production environment.
1855
1856 <h5>Recommend To Be Fixed/Hidden</h5>
1857 Configuration options can be defined as fixed or hidden.
1858 A "fix" configuration option is set at build time
1859 and cannot be changed without rebuilding. "Fixed"
1860 configuration options are not displayed using the cimconfig
1861 denise.eckstein 1.1 command. This feature can be used by vendors to limit
1862 OpenPegasus functionality and configurability.
1863
1864 A "hidden" configuration option is an option that is
1865 configurable (i.e., "not fixed"), but not externally
1866 advertised using the cimconfig command. The "hidden"
1867 feature can be used to define "internal use only"
1868 configuration options.
1869
1870 <h5>Dynamic?</h5>
1871 If yes, the value of the configuration option can be
1872 changed without stopping and restarting the CIM Server.
1873
1874 <h5>Directory Specifications</h5>
1875 <p>Note that the variables included in the following table
1876 (e.g., $LOGDIR) are for documentation purposes only and
1877 have been defined to simplify the description of the
1878 configuration options. In particular,
1879 these variables DO NOT correspond to environment variables
1880 implemented in the OpenPegasus code. Default values
1881 for the following variables are platform
1882 denise.eckstein 1.1 and vendor dependent and not documented in this document.</p>
1883
1884 <table border="1" cellspacing="1" bordercolordark="#666666"
1885 bordercolorlight="#CCCCCC" width=148
1886 style='font-size=10.0pt;font-family:Arial' height="228">
1887 <tr>
1888 <th bgcolor="#CAE6CA" width=1 height="16"> </th>
1889 </tr>
1890 <tr align="center">
1891 <td align="left" width="1" height="12">$LOGDIR</td>
1892 </tr>
1893 <tr align="center">
1894 <td align="left" width="1" height="14">$PROVIDERDIRS</td>
1895 </tr>
1896 <tr align="center">
1897 <td align="left" width="1" height="14">
1898 $PROVIDERMANAGERDIRS</td>
1899 </tr>
1900 <tr align="center">
1901 <td align="left" width="1" height="14">$REPOSITORYDIR </td>
1902 </tr>
1903 denise.eckstein 1.1 <tr align="center">
1904 <td align="left" width="1" height="14">$CERTIFICATEDIR
1905 </td>
1906 </tr>
1907 <tr align="center">
1908 <td align="left" width="1" height="14">$LOCALAUTHDIR</td>
1909 </tr>
1910 <tr align="center">
1911 <td align="left" width="1" height="14">$TRACEDIR</td>
1912 </tr>
1913 <tr align="center">
1914 <td align="left" width="1" height="14">$CONFIGDIR</td>
1915 </tr>
1916 <tr align="center">
1917 <td align="left" width="1" height="14">$PIDFILE</td>
1918 </tr>
1919 <tr align="center">
1920 <td align="left" width="1" height="14">$RANDOMDIR</td>
1921 </tr>
1922 <tr align="center">
1923 <td align="left" width="1" height="14">$SOCKETDIR</td>
1924 denise.eckstein 1.1 </tr>
1925 <tr align="center">
1926 <td align="left" width="1" height="14">$MESSAGEDIR</td>
1927 </tr>
1928 </table>
1929 </ul>
1930
1931 <h4>Definitions</h4>
1932
1933 <h5>authorizedUserGroups</h5>
1934 <ul>
1935 <b>Description:</b> If the <b>authorizedUserGroups</b>
1936 property is set, the value is interpreted as a list of
1937 comma-separated user groups whose members may issue CIM
1938 requests. A user who is not a member of any of these groups is
1939 restricted from issuing CIM requests, with the exception of
1940 privileged users (root user). If the <b>authorizedUserGroups</b>
1941 property is not set, any user may issue CIM requests.<br>
1942 <b>Default Value: </b>blank<br>
1943 <b>Recommended Default Value (Development Build): </b>blank<br>
1944 <b>Recommended Default Value (Release Build): </b>blank<br>
1945 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1946 No/No<br>
1947 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
1948 <b>Dynamic?: </b>No<br>
1949 <b>Example: </b>
1950 #cimconfig -s authorizedUserGroups=users,systemusers -p<br>
1951 <b>Considerations: </b>This feature is available only when
1952 the OpenPegasus source is compiled with the flag
1953 PEGASUS_ENABLE_USERGROUP_AUTHORIZATION set.
1954 </ul>
1955
1956 <h5>daemon</h5>
1957 <ul>
1958 <b>Description: </b>This option enables/disables forking of
1959 the code to create a background daemon process.<br>
1960 <b>Default Value: </b>true<br>
1961 <b>Recommended Default Value (Development Build): </b>true<br>
1962 <b>Recommended Default Value (Release Build): </b>true<br>
1963 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
1964 No/No<br>
1965 <b>Recommend To Be Fixed/Hidden (Release Build): </b>
1966 denise.eckstein 1.1 No/Yes<br>
1967 <b>Dynamic?: </b>No<p> <br>
1968 <br>
1969 <table border="1" cellspacing="1" bordercolordark="#666666"
1970 bordercolorlight="#CCCCCC" width=531
1971 style='font-size=10.0pt;font-family:Arial'>
1972 <tr>
1973 <th bgcolor="#CAE6CA" width="168">Platform</th>
1974 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
1975 </tr>
1976 <tr align="center">
1977 <td width="168">Linux</td>
1978 <td align="left" width="350">
1979 Pegasus/Config/DefaultPropertyTableLinux.h</td>
1980 </tr>
1981 <tr align="center">
1982 <td width="168">HP-UX</td>
1983 <td align="left" width="350">
1984 Pegasus/Config/DefaultPropertyTableHpux.h</td>
1985 </tr>
1986 <tr align="center">
1987 denise.eckstein 1.1 <td width="168">OpenVMS</td>
1988 <td align="left" width="350">
1989 Pegasus/Config/DefaultPropertyTableVms.h</td>
1990 </tr>
1991 </table>
1992 </ul>
1993
1994 <h5>enableAssociationTraversal</h5>
1995 <ul>
1996 <b>Description: </b>If true, the CIM Server will support
1997 the four association traversal operators: Associators,
1998 AssociatorNames,References, and ReferenceNames.<br>
1999 <b>Default Value: </b>true<br>
2000 <b>Recommended Default Value (Development Build): </b>true<br>
2001 <b>Recommended Default Value (Release Build): </b>true<br>
2002 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2003 No/No<br>
2004 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2005 <b>Dynamic?: </b>No<br>
2006 <b>Considerations: </b>There is still an outstanding
2007 Provider Registration issue that restricts the degree to
2008 denise.eckstein 1.1 which separate Providers can register for Associations.<br>
2009 <br>
2010 <table border="1" cellspacing="1" bordercolordark="#666666"
2011 bordercolorlight="#CCCCCC" width=531
2012 style='font-size=10.0pt;font-family:Arial'>
2013 <tr>
2014 <th bgcolor="#CAE6CA" width="168">Platform</th>
2015 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2016 </tr>
2017 <tr align="center">
2018 <td width="168">Linux</td>
2019 <td align="left" width="350">
2020 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2021 </tr>
2022 <tr align="center">
2023 <td width="168">HP-UX</td>
2024 <td align="left" width="350">
2025 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2026 </tr>
2027 <tr align="center">
2028 <td width="168">OpenVMS</td>
2029 denise.eckstein 1.1 <td align="left" width="350">
2030 Pegasus/Config/DefaultPropertyTableVms.h</td>
2031 </tr>
2032 </table>
2033 </ul>
2034
2035 <h5>enableAuditLog</h5>
2036 <ul>
2037 <b>Description: </b>Used to enable or disable audit
2038 logging at run time. If true, audit logging will be enabled.<br>
2039 <b>Recommended Default Value (Development Build): </b>false<br>
2040 <b>Recommended Default Value (Release Build): </b>false<br>
2041 <b>Recommend To Be Fixed/Hidden (Development Build): </b>
2042 No/No<br>
2043 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2044 <b>Dynamic?: </b>Yes<br>
2045 <b>Source Configuration File: </b>
2046 Pegasus/Config/DefaultPropertyTable.h<br>
2047 </ul>
2048
2049 <h5>enableAuthentication</h5>
2050 denise.eckstein 1.1 <ul>
2051 <b>Description: </b>If true, a Client must be authenticated
2052 to access the CIM Server.<br>
2053 <b>Recommended Default Value (Development Build): </b>false<br>
2054 <b>Recommended Default Value (Release Build): </b>true<br>
2055 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2056 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2057 <b>Dynamic?: </b>No<br>
2058 <b>Source Configuration File: </b>
2059 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2060 </ul>
2061
2062 <h5>enableBinaryRepository</h5>
2063 <ul>
2064 <b>Description: </b>Setting this to true will activate the
2065 binary repository support on the next restart of cimserver.<br>
2066 <b>Recommended Default Value (Development Build): </b>false<br>
2067 <b>Recommended Default Value (Release Build): </b>false<br>
2068 <b>Recommend To Be Fixed/Hidden (Development Build): </b>Yes<br>
2069 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2070 <b>Dynamic?: </b>No<br>
2071 denise.eckstein 1.1 <b>Considerations: </b>Repositories containing a mixture
2072 of binary and XML objects are supported.<br>
2073 <b>Source Configuration File: </b>
2074 Pegasus/Config/RepositoryPropertyOwner.cpp</p>
2075 </ul>
2076
2077
2078 <h5>enableHttpConnection</h5>
2079 <ul>
2080 <b>Description: </b>If true, allows connections to
2081 the CIM Server using the HTTP protocol<br>
2082 <b>Default Value: </b>true<br>
2083 <b>Recommended Default Value (Development Build): </b>true<br>
2084 <b>Recommended Default Value (Release Build): </b>false<br>
2085 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2086 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2087 <b>Dynamic?: </b>No<br>
2088 <b>Considerations: </b>
2089 Enabling HTTP will allow clients to connect with security
2090 properties different than those associated with encrypted SSL
2091 traffic, and its configured SSL authentication or other security
2092 denise.eckstein 1.1 behavior. This option should only be enabled in environments
2093 where sending the HTTP Request and HTTP Response as
2094 clear text messages does not introduce a security risk.
2095 Note that if authentication is enabled (enableAuthentication),
2096 user names and passwords will be included in the text of the
2097 HTTP message.<br>
2098 <br>
2099 <table border="1" cellspacing="1" bordercolordark="#666666"
2100 bordercolorlight="#CCCCCC" width=531
2101 style='font-size=10.0pt;font-family:Arial'>
2102 <tr>
2103 <th bgcolor="#CAE6CA" width="168">Platform</th>
2104 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2105 </tr>
2106 <tr align="center">
2107 <td width="168">Linux</td>
2108 <td align="left" width="350">
2109 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2110 </tr>
2111 <tr align="center">
2112 <td width="168">HP-UX</td>
2113 denise.eckstein 1.1 <td align="left" width="350">
2114 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2115 </tr>
2116 <tr align="center">
2117 <td width="168">OpenVMS</td>
2118 <td align="left" width="350">
2119 Pegasus/Config/DefaultPropertyTableVms.h</td>
2120 </tr>
2121 </table>
2122 </ul>
2123
2124 <h5>enableHttpsConnection</h5>
2125 <ul>
2126 <b>Description: </b>If true, allows connections to
2127 the CIM Server using the HTTPS protocol (HTTP using
2128 Secure Socket Layer encryption)<br>
2129 <b>Default Value: </b>false<br>
2130 <b>Recommended Default Value (Development Build): </b>true<br>
2131 <b>Recommended Default Value (Release Build): </b>true<br>
2132 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2133 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2134 denise.eckstein 1.1 <b>Dynamic?: </b>No<br>
2135 <b>Considerations: </b>For this option to work,
2136 the environment variable PEGASUS_HAS_SSL must have
2137 been set when CIM Server was built.<br>
2138 <br>
2139 <table border="1" cellspacing="1" bordercolordark="#666666"
2140 bordercolorlight="#CCCCCC" width=531
2141 style='font-size=10.0pt;font-family:Arial'>
2142 <tr>
2143 <th bgcolor="#CAE6CA" width="168">Platform</th>
2144 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2145 </tr>
2146 <tr align="center">
2147 <td width="168">Linux</td>
2148 <td align="left" width="350">
2149 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2150 </tr>
2151 <tr align="center">
2152 <td width="168">HP-UX</td>
2153 <td align="left" width="350">
2154 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2155 denise.eckstein 1.1 </tr>
2156 <tr align="center">
2157 <td width="168">OpenVMS</td>
2158 <td align="left" width="350">
2159 Pegasus/Config/DefaultPropertyTableVms.h</td>
2160 </tr>
2161 </table>
2162 </ul>
2163
2164 <h5>enableIndicationService</h5>
2165 <ul>
2166 <b>Description: </b>If true, the CIM Server will support
2167 CIM Indications.<br>
2168 <b>Default Value: </b>true<br>
2169 <b>Recommended Default Value (Development Build): </b>true<br>
2170 <b>Recommended Default Value (Release Build): </b>true<br>
2171 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2172 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2173 <b>Dynamic?: </b>No<p> <br>
2174 <br>
2175 <table border="1" cellspacing="1" bordercolordark="#666666"
2176 denise.eckstein 1.1 bordercolorlight="#CCCCCC" width=531
2177 style='font-size=10.0pt;font-family:Arial'>
2178 <tr>
2179 <th bgcolor="#CAE6CA" width="168">Platform</th>
2180 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2181 </tr>
2182 <tr align="center">
2183 <td width="168">Linux</td>
2184 <td align="left" width="350">
2185 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2186 </tr>
2187 <tr align="center">
2188 <td width="168">HP-UX</td>
2189 <td align="left" width="350">
2190 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2191 </tr>
2192 <tr align="center">
2193 <td width="168">OpenVMS</td>
2194 <td align="left" width="350">
2195 Pegasus/Config/DefaultPropertyTableVms.h</td>
2196 </tr>
2197 denise.eckstein 1.1 </table>
2198 </ul>
2199
2200 <h5>enableNamespaceAuthorization</h5>
2201 <ul>
2202 <b>Description: </b>If true, the CIM Server restricts
2203 access to namespaces based on configured user authorizations
2204 [user authorizations may be configured using the cimauth
2205 command]<br>
2206 <b>Default Value: </b>false<br>
2207 <b>Recommended Default Value (Development Build): </b>false<br>
2208 <b>Recommended Default Value (Release Build): </b>false<br>
2209 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2210 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2211 <b>Dynamic?: </b>No<br>
2212 <b>Considerations: </b>
2213 This option offers limited functionality and, in most
2214 environments, expensive to administer. It's use is not
2215 recommended.<br>
2216 <b>Source Configuration File: </b>
2217 Pegasus/Config/SecurityPropertyOwner.cpp</ul>
2218 denise.eckstein 1.1
2219 <h5>enableNormalization</h5>
2220 <ul>
2221 <b>Description: </b>If true, objects returned from instance
2222 providers are validated and normalized. <br>
2223 <b>Default Value: </b>true<br>
2224 <b>Recommended Default Value (Development Build): </b>true<br>
2225 <b>Recommended Default Value (Release Build): </b>false<br>
2226 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2227 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2228 kavita.gupta 1.7 <b>Dynamic?: </b>Yes<br>
|
2229 denise.eckstein 1.1 <b>Considerations: </b>
2230 <ul>
2231 <li>Any errors encountered during normalization result in a
2232 CIMException with the status code set to CIM_ERR_FAILED
2233 and a meaningful, context specific error description
2234 (messages will be localized). Providers that catch the
2235 exception have an opportunity to handle the error.
2236 Otherwise, the exception is passed to the Provider Manager
2237 and becomes the response for that Provider.
2238 <li>Provider Modules that are listed on the
2239 excludeModulesFromNormalization
2240 configuration option are excluded from normalization.
2241 <li>Since the concept of normalization is relatively new to
2242 OpenPegasus and it establishes and enforces rules for
2243 objects returned by providers, it should only
2244 apply to providers written against the SDK in which it was
2245 introduced (or later). Therefore only Provider Modules that
2246 have the following InterfaceType and InterfaceVersion
2247 combination will be subject to normalization:
2248 <ul>
2249 <li>'C++Default' / 2.5.0 or greater
2250 denise.eckstein 1.1 <li>'CMPI' / 2.0.0 or greater
2251 <li>'JMPI' / 1.0.0 or greater
2252 </ul>
2253 </ul>
2254 <b>Source Configuration File: </b>
2255 Pegasus/Config/NormalizationPropertyOwner.cpp<br>
2256 </ul>
2257
2258
2259 <h5>enableRemotePrivilegedUserAccess</h5>
2260 <ul>
2261 <b>Description: </b>If true, the CIM Server allows
2262 access by a privileged user from a remote system<br>
2263 <b>Default Value: </b>true<br>
2264 <b>Recommended Default Value (Development Build): </b>true<br>
2265 <b>Recommended Default Value (Release Build): </b>true<br>
2266 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2267 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2268 <b>Dynamic?: </b>No<br>
2269 <b>Considerations: </b>Many management operations require
2270 privileged user access. Disabling remote access by
2271 denise.eckstein 1.1 privileged user could significantly affect
2272 functionality.<br>
2273 <b>Source Configuration File: </b>
2274 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2275 </ul>
2276
2277 <h5>enableSSLExportClientVerification</h5>
2278 <ul>
2279 <b>Description: </b>If true, the CIM Server allows HTTPS
2280 connection for CIMExport requests on the port specified by the
2281 service name "wbem-exp-https".<br>
2282 <b>Default Value: </b>false<br>
2283 <b>Recommended Default Value (Development Build): </b>true<br>
2284 <b>Recommended Default Value (Release Build): </b>false<br>
2285 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2286 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2287 <b>Dynamic?: </b>No<br>
2288 <b>Source Configuration File: </b>
2289 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2290 </ul>
2291
2292 denise.eckstein 1.1
2293 <h5>enableSubscriptionsForNonprivilegedUsers</h5>
2294 <ul>
2295 <b>Description: </b>If true, operations (create instance,
2296 modify instance, delete instance, get instance, enumerate
2297 instances, enumerate instance names) on indication
2298 filter, listener destination, and subscription instances
2299 may be performed by non-privileged users. Otherwise, these
2300 operations may only be performed on these instances by
2301 privileged users.<br>
2302 <b>Default Value: </b>true<br>
2303 <b>Recommended Default Value (Development Build): </b>true<br>
2304 <b>Recommended Default Value (Release Build): </b>false<br>
2305 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2306 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2307 <b>Dynamic?: </b>No<br>
2308 <b>Considerations: </b>This option has meaning only if
2309 enableIndicationService=true.<br>
2310 <b>Source Configuration File: </b>
2311 Pegasus/Config/SecurityPropertyOwner.cpp<p> </p>
2312 </ul>
2313 denise.eckstein 1.1
2314 <h5>excludeModulesFromNormalization</h5>
2315 <ul>
2316 <b>Description: </b>If the excludeModulesfromNormalization
2317 property is set, the value is interpreted as a list of
2318 comma-separated Provider Module names (as specified in
2319 PG_ProviderModule.Name) to exclude from validation and
2320 normalization.<br>
2321 <b>Default Value: </b>""<br>
2322 <b>Recommended Default Value (Development Build):</b>
2323 ""<br>
2324 <b>Recommended Default Value (Release Build): </b>
2325 ""<br>
2326 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2327 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2328 <b>Dynamic?: </b>No<br>
2329 <b>Considerations: </b>All objects managed by all
2330 providers will be excluded from validation and normalization
2331 if its module name appears in this list.<br>
2332 <b>Source Configuration File: </b>
2333 Pegasus/Config/NormalizationPropertyOwner.cpp
2334 denise.eckstein 1.1 </ul>
2335
2336
2337 <h5><b>exportSSLTrustStore</b></h5>
2338 <ul>
2339 <b>Description: </b>Specifies the location of the OpenSSL
2340 truststore for Indications. Consistent with the OpenSSL
2341 implementation, a truststore can be either a file or directory.
2342 If the truststore is a directory, all the certificates within
2343 the directory are considered trusted.<br>
2344 <b>Default Value: </b>indication_trust.pem<br>
2345 <b>Recommended Default Value (Development Build): </b>
2346 indication_trust.pem<br>
2347 <b>Recommended Default Value (Release Build): </b>
2348 $CERTIFICATEDIR/indication_trust.pem<br>
2349 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2350 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2351 <b>Dynamic?: </b>No<br>
2352 <b>Source Configuration File: </b>
2353 Pegasus/Config/SecurityPropertyOwner.cpp</p>
2354 </ul>
2355 denise.eckstein 1.1
2356 <h5>forceProviderProcesses</h5>
2357 <ul>
2358 <b>Description: </b>If true, the CIM Server runs Providers
2359 in separate processes rather than loading and calling Provider
2360 libraries directly within the CIM Server process.<br>
2361 <b>Default Value: </b>Dependent on the value of
2362 PEGASUS_DEFAULT_ENABLE_OOP<br>
2363 <b>Recommended Default Value (Development Build):</b>true (HP-UX,
2364 Linux)<br>
2365 <b>Recommended Default Value (Release Build): </b>true (HP-UX,
2366 Linux)<br>
2367 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2368 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2369 <b>Dynamic?: </b>No<br>
2370 <b>Considerations: </b>In a dynamic, potentially multi-vendor,
2371 environment, the ability to run Providers in separate processes
2372 can significantly increase the stability, maintainability and
2373 supportability of the overall solution. Running Providers
2374 in separate process spaces: (1) helps isolate components (i.e.,
2375 cimserver and Providers) from a catastrophic failure
2376 denise.eckstein 1.1 (segmentation faults, memory leaks) of a single Provider and (2)
2377 reduces the risk of accidental or malicious sharing of sensitive
2378 data among Providers. This benefit comes at a cost.
2379 Moving Providers out of the cimserver process increases
2380 communication costs and can significantly increase response
2381 time. Actual results will vary, but it is common for
2382 response times to increase by a factor of 2.<br>
2383 <b>Note 1: </b>When forceProviderProcesses is true, the CIM
2384 Server will load each Provider Module (i.e., library) into a
2385 separate process. Providers in different Provider Modules
2386 cannot depend on a communication mechanism that
2387 requires them to run in the same process space.<br>
2388 <b>Note 2: </b>Although the catastrophic failure of an
2389 Out-Of-Process (OOP) Provider Module will not result in a
2390 failure of the CIM Server process, if the failed OOP Provider
2391 Module included Indication Providers, Indications may be
2392 lost. If logging is enabled, the CIM Server will log a
2393 message informing administrators of what happened and what
2394 corrective actions can be taken.<br>
2395 <br>
2396 <table border="1" cellspacing="1" bordercolordark="#666666"
2397 denise.eckstein 1.1 bordercolorlight="#CCCCCC" width=531
2398 style='font-size=10.0pt;font-family:Arial'>
2399 <tr>
2400 <th bgcolor="#CAE6CA" width="168">Platform</th>
2401 <th bgcolor="#CAE6CA" width=350>
2402 Source Configuration File</th>
2403 </tr>
2404 <tr align="center">
2405 <td width="168">Linux</td>
2406 <td align="left" width="350">
2407 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2408 </tr>
2409 <tr align="center">
2410 <td width="168">HP-UX</td>
2411 <td align="left" width="350">
2412 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2413 </tr>
2414 <tr align="center">
2415 <td width="168">OpenVMS</td>
2416 <td align="left" width="350">
2417 Pegasus/Config/DefaultPropertyTableVms.h</td>
2418 denise.eckstein 1.1 </tr>
2419 </table>
2420 </ul>
2421
2422 <h5>home</h5>
2423 <ul>
2424 <b>Description: </b>If set, this configuration option defines
2425 the runtime default value for PEGASUS_HOME.<br>
2426 <b>Default Value: </b>"./"<br>
2427 <b>Recommended Default Value (Development Build)</b>"./"<br>
2428 <b>Recommended Default Value (Release Build)""</b><br>
2429 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2430 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2431 <b>Dynamic?: </b>No<p> <br>
2432 <br>
2433 <table border="1" cellspacing="1" bordercolordark="#666666"
2434 bordercolorlight="#CCCCCC" width=531
2435 style='font-size=10.0pt;font-family:Arial'>
2436 <tr>
2437 <th bgcolor="#CAE6CA" width="168">Platform</th>
2438 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2439 denise.eckstein 1.1 </tr>
2440 <tr align="center">
2441 <td width="168">Linux</td>
2442 <td align="left" width="350">
2443 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2444 </tr>
2445 <tr align="center">
2446 <td width="168">HP-UX</td>
2447 <td align="left" width="350">
2448 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2449 </tr>
2450 <tr align="center">
2451 <td width="168">OpenVMS</td>
2452 <td align="left" width="350">
2453 Pegasus/Config/DefaultPropertyTableVms.h</td>
2454 </tr>
2455 </table>
2456 </ul>
2457
2458 <h5>httpPort</h5>
2459 <ul>
2460 denise.eckstein 1.1 <b>Description: </b>OpenPegasus first attempts to look up the
2461 port number for HTTP using getservbyname for the 'wbem-http'
2462 service. The httpPort configuration setting is used only when the
2463 getservbyname lookup fails.<br>
2464 <b>Default Value: </b>blank<br>
2465 <b>Recommended Default Value (Development Build): </b>blank<br>
2466 <b>Recommended Default Value (Release Build): </b>5988<br>
2467 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2468 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2469 <b>Dynamic?: </b>No<br>
2470 <b>Considerations: </b>(1)The use of 5988 for WBEM HTTP is
2471 recommended by the DMTF. This port has been registered with
2472 <a href="http://www.iana.org/assignments/port-numbers">
2473 IANA</a>. In a production environment, the recommendation is
2474 to use /etc/services to configure the value of this port. (2)
2475 With the release of OpenPegasus 2.5, the default values for
2476 httpPort was changed from 5988 to "". This
2477 change was made to allow the OpenPegasus to differentiate
2478 between a default setting of 5988 and a customer-defined
2479 setting of 5988. With this change, if the port
2480 number is explicitly set, the configured port will be used
2481 denise.eckstein 1.1 regardless of the settings in /etc/services. If no port number
2482 is specified, the server will continue to use the value in
2483 /etc/services.<br>
2484 <br>
2485 <table border="1" cellspacing="1" bordercolordark="#666666"
2486 bordercolorlight="#CCCCCC" width=531
2487 style='font-size=10.0pt;font-family:Arial'>
2488 <tr>
2489 <th bgcolor="#CAE6CA" width="168">Platform</th>
2490 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2491 </tr>
2492 <tr align="center">
2493 <td width="168">Linux</td>
2494 <td align="left" width="350">
2495 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2496 </tr>
2497 <tr align="center">
2498 <td width="168">HP-UX</td>
2499 <td align="left" width="350">
2500 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2501 </tr>
2502 denise.eckstein 1.1 <tr align="center">
2503 <td width="168">OpenVMS</td>
2504 <td align="left" width="350">
2505 Pegasus/Config/DefaultPropertyTableVms.h</td>
2506 </tr>
2507 </table>
2508 </ul>
2509
2510 <h5>httpsPort</h5>
2511 <ul>
2512 <b>Description: </b>
2513 OpenPegasus first attempts to look up the port number for HTTPS
2514 using getservbyname for the 'wbem-https' service. The httpsPort
2515 configuration setting is used only when the getservbyname lookup
2516 fails.<br>
2517 <b>Default Value: </b>blank<br>
2518 <b>Recommended Default Value (Development Build): </b>blank<br>
2519 <b>Recommended Default Value (Release Build): </b>5989<br>
2520 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2521 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2522 <b>Dynamic?: </b>No<br>
2523 denise.eckstein 1.1 <b>Considerations: </b>(1)The use of 5989 for WBEM HTTPS
2524 is recommended by the DMTF. This port has been registered with
2525 <a href="http://www.iana.org/assignments/port-numbers">IANA</a>.
2526 In a production environment, the recommendation is to use
2527 /etc/services to configure the value of this port.(2)
2528 With the release of OpenPegasus 2.5, the default values for
2529 httpPort was changed from 5989 to "". This
2530 change was made to allow the OpenPegasus to differentiate
2531 between a default setting of 5989 and a customer-defined
2532 setting of 5989. With this change, if the port number
2533 is explicitly set, the configured port will be used regardless
2534 of the settings in /etc/services. If no port number is specified,
2535 the server will continue to use the value in /etc/services.<br>
2536 <br>
2537
2538 <table border="1" cellspacing="1" bordercolordark="#666666"
2539 bordercolorlight="#CCCCCC" width=531
2540 style='font-size=10.0pt;font-family:Arial'>
2541 <tr>
2542 <th bgcolor="#CAE6CA" width="168">Platform</th>
2543 <th bgcolor="#CAE6CA" width=350>Source Configuration File</th>
2544 denise.eckstein 1.1 </tr>
2545 <tr align="center">
2546 <td width="168">Linux</td>
2547 <td align="left" width="350">
2548 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2549 </tr>
2550 <tr align="center">
2551 <td width="168">HP-UX</td>
2552 <td align="left" width="350">
2553 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2554 </tr>
2555 <tr align="center">
2556 <td width="168">OpenVMS</td>
2557 <td align="left" width="350">
2558 Pegasus/Config/DefaultPropertyTableVms.h</td>
2559 </tr>
2560 </table>
2561 </ul>
2562
2563 <h5>idleConnectionTimeout</h5>
2564 <ul>
2565 denise.eckstein 1.1 <b>Description: </b>If set to a positive integer, this value
2566 specifies a minimum timeout value for idle client connections.
2567 If set to zero, idle client connections do not time out.<br>
2568 <b>Recommended Default Value (Development Build): </b>0<br>
2569 <b>Recommended Default Value (Release Build): </b>0<br>
2570 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2571 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2572 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2573 denise.eckstein 1.1 <b>Considerations: </b>A client connection is considered
2574 idle when it is not in the process of sending a request and
2575 the CIM Server is not processing a request from that connection.
2576 An idle connection timeout allows reclamation of the system
2577 resources allocated for idle CIM Server connections. Note that
2578 the CIM Server may allow an idle connection to persist longer
2579 than the configured timeout value based on server activity.
2580 Some client applications may not behave correctly if a
2581 connection timeout is introduced. Client compatibility should be
2582 considered when configuring an idle connection timeout value.
2583 The idle connection time is computed using the system clock.
2584 Thus, resetting the system clock may cause unexpected timeout
|
2585 kavita.gupta 1.11 behavior.This config property can be changed dynamically. The
2586 changes will apply to all new and existing connections. <br>
|
2587 denise.eckstein 1.1 </ul>
2588
2589 <h5>logdir</h5>
2590 <ul>
2591 <b>Description: </b>Specifies the name of the directory
2592 to be used for the OpenPegasus specific log files.<br>
2593 <b>Recommended Default Value (Development Build): </b>logs<br>
2594 <b>Recommended Default Value (Release Build): </b>$LOGDIR<br>
2595 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2596 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2597 <b>Dynamic?: </b>Yes<br>
2598 <b>Considerations: </b>This option is not supported if
2599 PEGASUS_USE_SYSLOGS is defined.<br>
2600 <b>Source Configuration File: </b>
2601 Pegasus/Config/LogPropertyOwner.cpp<br>
2602 </ul>
2603
2604 <h5>logLevel</h5>
2605 <ul>
2606 <b>Description: </b>Defines the desired level of logging.
2607 Valid values include: TRACE, INFORMATION, WARNING, SEVERE,
2608 denise.eckstein 1.1 FATAL.<br>
2609 <b>Default Value: </b>"INFORMATION"<br>
2610 <b>Recommended Default Value (Development Build): </b>
2611 "INFORMATION"<br>
2612 <b>Recommended Default Value (Release Build): </b>"SEVERE"<br>
2613 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2614 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2615 <b>Dynamic?: </b>Yes<br>
2616 <b>Considerations: </b><br>
2617 <b>Source Configuration File: </b>
2618 Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2619 </ul>
2620
|
2621 mreddy 1.3 <h5>maxLogFileSizeKBytes</h5>
2622 <ul>
2623 <b>Description: </b>Specifies the maximum size of the logfile in Kilo
2624 Bytes. If the logfile size exceeds maxLogFileSizeKBytes logfile will be pruned.<br>
2625 <b>Default Value: </b>32768<br>
2626 <b>Recommended Default Value (Development Build): </b> 32768<br>
2627 <b>Recommended Default Value (Release Build): </b>32768<br>
2628 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2629 <b>Recommend To Be Fixed/Hidden (Release Build):</b> No/No<br>
2630 <b>Dynamic?:</b> Yes<br>
2631 <b>Considerations:</b> This option is not supported if PEGASUS_USE_SYSLOGS is defined. Minimum accepted value is 32 KB. <br>
2632 <b>Source Configuration File:</b> Pegsus/Config/LogPropertyOwner.cpp<p> </p>
2633 </ul>
|
2634 denise.eckstein 1.1 <h5>maxProviderProcesses</h5>
2635 <ul>
2636 <b>Description:</b> Limits the number of provider
2637 processes (see 'forceProviderProcesses) that may run
2638 concurrently. A 'maxProviderProcesses' value of '0' indicates
2639 that the number of Provider Agent processes is unlimited<br>
2640 <b>Default Value: </b>0<br>
2641 <b>Recommended Default Value (Development Build):</b> 0<br>
2642 <b>Recommended Default Value (Release Build):</b> 0<br>
2643 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2644 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
|
2645 kavita.gupta 1.9 <b>Dynamic?: </b>Yes<br>
2646 <b>Considerations: </b>Consider there are five provider processes
2647 already running and the maxProviderProcesses is dynamically changed to
2648 four. In this case though new provider processes will not be created
2649 but existing five will continue running<br>
|
2650 denise.eckstein 1.1 <br>
2651 <table border="1" cellspacing="1" bordercolordark="#666666"
2652 bordercolorlight="#CCCCCC" width=531
2653 style='font-size=10.0pt;font-family:Arial'>
2654 <tr>
2655 <th bgcolor="#CAE6CA" width="168">Platform</th>
2656 <th bgcolor="#CAE6CA" width=350>
2657 Source Configuration File</th>
2658 </tr>
2659 <tr align="center">
2660 <td width="168">Linux</td>
2661 <td align="left" width="350">
2662 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2663 </tr>
2664 <tr align="center">
2665 <td width="168">HP-UX</td>
2666 <td align="left" width="350">
2667 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2668 </tr>
2669 <tr align="center">
2670 <td width="168">OpenVMS</td>
2671 denise.eckstein 1.1 <td align="left" width="350">
2672 Pegasus/Config/DefaultPropertyTableVms.h</td>
2673 </tr>
2674 </table>
2675 </ul>
2676
2677 <h5>messageDir</h5>
2678 <ul>
2679 <b>Description: </b>Specifies the name of the directory to
2680 be used for the OpenPegasus translated messages.<br>
2681 <b>Default Value: </b>msg<br>
2682 <b>Recommended Default Value (Development Build): </b>msg<br>
2683 <b>Recommended Default Value (Release Build):</b>
2684 $MESSAGEDIR/msg<br>
2685 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2686 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2687 <b>Dynamic?: </b>No<br>
2688 <b>Considerations: </b>Only used when message localization
2689 is enabled. See PEGASUS_HAS_MESSAGES for details.<br>
2690 <b>Source Configuration File: </b>
2691 FileSystemPropertyOwner.cpp<br>
2692 denise.eckstein 1.1 </ul>
2693
2694 <h5>providerDir</h5>
2695 <ul>
2696 <b>Description: </b>Specifies the names of the directories
2697 that contains Provider executables.<br>
2698 <b>Recommended Default Value (Development Build): </b>lib<br>
2699 <b>Recommended Default Value (Release Build): </b>
2700 $PROVIDERDIRS<br>
2701 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2702 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
|
2703 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
|
2704 denise.eckstein 1.1 <b>Considerations: </b>The CIM Server runs as a privileged
2705 user. And, since Providers run in the same process space as the
2706 CIM Server, Providers also have privileged access to the
2707 system. Allowing a registered Provider’s executable to be
2708 replaced with malicious code would result in a critical
2709 security defect, giving a malicious user privileged access
2710 to the system. Adminstrators are responsible for ensuring
2711 that only trusted Providers are loaded into providerDir.
2712 In order to simplify the management task associated with
2713 securing Provider executable, the value of providerDir can be
2714 fixed at build time (i.e., set to one or more fixed, well-known
2715 locations).<br>
2716 <b>Source Configuration File: </b>
2717 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2718 </ul>
2719
2720 <h5>providerManagerDir</h5>
2721 <ul>
2722 <b>Description: </b>Specifies the name of the directory that
2723 contains the ProviderManager plugin libraries.<br>
2724 <b>Recommended Default Value (Development Build): </b>lib<br>
2725 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>
2726 $PROVIDERMANAGERDIRS<br>
2727 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2728 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2729 <b>Dynamic?: </b>No<br>
2730 <b>Considerations: </b>Should be a dedicated directory to
2731 minimize inspection of non-applicable files. Additionally,
2732 since all calls to the providers go through the provider
2733 managers, the same care should be taken with regards to
2734 security for the provider manager directory, as for provider
2735 directories.<br>
2736 <b>Source Configuration File: </b>
2737 Pegasus/Config/FileSystemPropertyOwner.cpp<br>
2738 </ul>
2739
2740 <h5>repositoryDir</h5>
2741 <ul>
2742 <b>Description: </b>Specifies the name of the directory
2743 to be used for the OpenPegasus repository.<br>
2744 <b>Recommended Default Value (Development Build): </b>repository<br>
2745 <b>Recommended Default Value (Release Build): </b>
2746 denise.eckstein 1.1 $REPOSITORYDIR/repository<br>
2747 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2748 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2749 <b>Dynamic?: </b>No<br>
2750 <b>Considerations: </b><br>
2751 <b>Source Configuration File: </b>
2752 Pegasus/Config/FileSystemPropertyOwner.cpp<p><br>
2753 </ul>
2754
2755 <h5>repositoryIsDefaultInstanceProvider</h5>
2756 <ul>
2757 <b>Description: </b>If true, the Repository functions
2758 as the Instance Provider for all classes for which there
2759 is not an explicitly registered Provider. This flag is
2760 also used to control the behavior of the repository when
2761 processing association operators.<br>
2762 <b>Recommended Default Value (Development Build): </b>true<br>
2763 <b>Recommended Default Value (Release Build): </b>false<br>
2764 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2765 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
2766 <b>Dynamic?: </b>No<br>
2767 denise.eckstein 1.1 <b>Considerations: </b>This flag can be used to configure
2768 the CIM Server to allow the Repository to be used by CIM Clients
2769 and CIM Providers as a dynamic data store. The setting of this
2770 flag will significantly affect CIM Server behavior as viewed
2771 by the CIM Client.<br>
2772
2773 The following issues should be considered when setting
2774 repositoryIsDefaultInstanceProvider=true:
2775
2776 <ul>
2777 <li><b>Authorization.</b> The repository has no
2778 concept of which users (or components) are authorized to
2779 perform which operations.</li>
2780 <li><b>Appearance of instrumentation.</b> A client application
2781 cannot determine whether instrumentation exists for a
2782 given CIM class. For example, imagine a client
2783 issues a CreateInstance operation on a Disk class
2784 for which no provider is registered.
2785 The instance will be stored in the repository, and
2786 the client gets a "success" response. Does that mean a
2787 disk device has been created on the server? Even worse,
2788 denise.eckstein 1.1 when another client issues an EnumerateInstances
2789 operation, the spurious Disk instance is returned.
2790 With repositoryIsDefaultInstanceProvider=false, the
2791 CreateInstance operation above would have returned a
2792 NOT_SUPPORTED error.</li>
2793 <li><b>Potential for inconsistent data.</b> Using the
2794 repository as a data cache increases the probability
2795 that a client will see stale or incorrect data. A
2796 provider can better control the correlation
2797 between the data returned and the current state of the
2798 underlying managed resource (whether or not the provider
2799 caches the data).</li>
2800 </ul>
2801 <br>
2802
2803 The following issues should be considered when setting
2804 repositoryIsDefaultInstanceProvider=false:
2805
2806 <ul>
2807 <li><b>Provider Availability.</b> Certain Providers have been
2808 developed to use the Repository as a dynamic data store.
2809 denise.eckstein 1.1 These Providers are currently not supported on system
2810 where this flag is disabled. E.g., the Common Diagnostics
2811 Model (CDM) Provider
2812 (http://developer.intel.com/design/servers/cdm/)
2813 relies on use of the Repository to store instances
2814 of CIM_DiagnosticSetting. If this flag set to
2815 false, this Provider will not function correctly. Note
2816 that this feature is supported by other WBEM
2817 implementation. Therefore, disabling this feature
2818 can increase the cost of migrating existing Providers to
2819 OpenPegasus.</li>
2820 </ul>
2821
2822 <b>Source Configuration File: </b>
2823 Pegasus/Config/RepositoryPropertyOwner.cpp<br>
2824 </ul>
2825
2826 <h5>shutdownTimeout</h5>
2827 <ul>
2828 <b>Description: </b>When a cimserver -s shutdown command is
2829 issued, specifies the maximum time in seconds for the CIM Server
2830 denise.eckstein 1.1 to complete outstanding CIM operation requests before shutting
2831 down; if the specified timeout period expires, the CIM Server
2832 will shut down, even if there are still CIM operations in
2833 progress. Minimum value is 2 seconds.<br>
2834 <b>Recommended Default Value (Development Build): </b>10<br>
2835 <b>Recommended Default Value (Release Build): </b>10<br>
2836 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2837 <b>Recommend To Be Fixed/Hidden (Release Build):</b>No/No<br>
2838 <b>Dynamic?: </b>Yes<br>
2839 <b>Considerations: </b><br>
2840 <b>Source Configuration File: </b>
2841 Pegasus/Config/ShutdownPropertyOwner.cpp<br>
2842 </ul>
2843
2844 <h5>slp</h5>
2845 <ul>
2846 <b>Description: </b>When set to true, OpenPegasus activates
2847 an SLP SA and issues DMTF defined SLP advertisements to this SA
2848 on startup.<br>
2849 <b>Default Value: </b>false<br>
2850 <b>Recommended Default Value (Development Build): </b>false<br>
2851 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>false<br>
2852 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2853 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2854 <b>Dynamic?: </b>No<p> <br>
2855 <br>
2856 <table border="1" cellspacing="1" bordercolordark="#666666"
2857 bordercolorlight="#CCCCCC" width=531
2858 style='font-size=10.0pt;font-family:Arial' height="80">
2859 <tr>
2860 <th bgcolor="#CAE6CA" width="168" height="16">Platform</th>
2861 <th bgcolor="#CAE6CA" width=350 height="16">
2862 Source Configuration File</th>
2863 </tr>
2864 <tr align="center">
2865 <td width="168" height="14">Linux</td>
2866 <td align="left" width="350" height="14">
2867 Pegasus/Config/DefaultPropertyTableLinux.h</td>
2868 </tr>
2869 <tr align="center">
2870 <td width="168" height="14">HP-UX</td>
2871 <td align="left" width="350" height="14">
2872 denise.eckstein 1.1 Pegasus/Config/DefaultPropertyTableHpux.h</td>
2873 </tr>
2874 <tr align="center">
2875 <td width="168" height="16">OpenVMS</td>
2876 <td align="left" width="350" height="16">
2877 Pegasus/Config/DefaultPropertyTableVms.h</td>
2878 </tr>
2879 </table>
2880 </ul>
2881
2882 <h5>socketWriteTimeout</h5>
2883 <ul>
2884 <b>Description: </b>If the CIM Server receives an
2885 EWOULDBLOCK/EAGAIN error on a non-blocking write,
2886 socketWriteTimeout defines the number of seconds the
2887 CIM Server will wait for the socket to get ready and resume
2888 writing data.<br>
2889 <b>Recommended Default Value (Development Build): </b>
2890 20 (seconds)<br>
2891 <b>Recommended Default Value (Release Build): </b>
2892 20 (seconds)<br>
2893 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2894 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
|
2895 kavita.gupta 1.11 <b>Dynamic?: </b>Yes<br>
2896 <b>Considerations: </b>Any changes made to this config property
2897 dynamically will apply to new CIM Server connections only
2898 keeping old already established connections unchanged.<br>
|
2899 denise.eckstein 1.1 <b>Source Configuration File: </b>
2900 Pegasus/Config/DefaultPropertyTable.h
2901 </ul>
2902
2903 <h5>sslCertificateFilePath</h5>
2904 <ul>
2905 <b>Description: </b>Contains the CIM Server SSL
2906 Certificate.<br>
2907 <b>Recommended Default Value (Development Build): </b>
2908 server.pem<br>
2909 <b>Recommended Default Value (Release Build): </b>
2910 $CERTIFICATEDIR/server.pem"<br>
2911 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2912 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2913 <b>Dynamic?: </b>No<br>
2914 <b>Considerations: </b>For a more detailed look at SSL options
2915 and their ramifications, please see the SSL guidelines.<br>
2916 <b>Source Configuration File: </b>
2917 Pegasus/Config/SecurityPropertyOwner.cpp
2918 </ul>
2919
2920 denise.eckstein 1.1 <h5>sslClientVerificationMode</h5>
2921 <ul>
2922 <b>Description: </b>Describes the desired level of support
2923 for certificate-based authentication.
2924 <ul style="MARGIN-TOP: 0in" type="circle">
2925 <li>“<b>required</b>” – The server requires certificate-based
2926 client authentication. A client MUST present a
2927 trusted certificate in order to access the CIM Server.
2928 If the client fails to send a certificate or sends an
2929 untrusted certificate, the connection will be rejected.</li>
2930 <li>“<b>optional</b>” – The server supports, but does not
2931 require, certificate-based client authentication. The
2932 server will request and attempt to validate a client
2933 certificate, however the connection will be accepted even
2934 if no certificate is sent or an untrusted certificate is
2935 sent. The server will then seek to authenticate the
2936 client via an authentication header.</li>
2937 <li>“<b>disabled</b>” – The server does not support
2938 certificate-based client authentication.</li>
2939 </ul>
2940 <b>Recommended Default Value (Development Build): </b>
2941 denise.eckstein 1.1 disabled<br>
2942 <b>Recommended Default Value (Release Build): </b>
2943 disabled<br>
2944 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2945 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
2946 <b>Dynamic?: </b>No<br>
2947 <b>Considerations: </b>(1) This property is only used if
2948 <b>enableHttpsConnection</b> is <b>"true"</b>.
2949 (2) If the platform does not support PEGASUS_LOCAL_DOMAIN_SOCKET,
2950 OpenPegasus attempts to use either HTTPS or
2951 HTTP to establish a local connection (connectLocal).
2952 For platforms that do not support PEGASUS_LOCAL_DOMAIN_SOCKET,
2953 Clients which use connectLocal, such as cimconfig -l -c,
2954 cimprovider -l -s and cimserver -s, will not work if the
2955 "sslClientVerificationMode" variable is set to
2956 "required" and HTTP is disabled. For these
2957 platforms, the recommended course of action is to change the
2958 property value to "optional."<br>
2959 <b>Source Configuration File: </b>
2960 Pegasus/Config/SecurityPropertyOwner.cpp
2961 </ul>
2962 denise.eckstein 1.1
2963 <h5>sslKeyFilePath</h5>
2964 <ul>
2965 <b>Description: </b>Contains the private key for the CIM
2966 Server SSL Certificate.<br>
2967 <b>Recommended Default Value (Development Build): </b>
2968 file.pem<br>
2969 <b>Recommended Default Value (Release Build): </b>
2970 $CERTIFICATEDIR/file.pem<br>
2971 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2972 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2973 <b>Dynamic?: </b>No<br>
2974 <b>Considerations: </b>File should be readable only by the
2975 user the cimserver is running as and/or privileged users. The
2976 file should be writeable only by a privileged user.<br>
2977 <b>Source Configuration File: </b>
2978 Pegasus/Config/SecurityPropertyOwner.cpp<br>
2979 </ul>
2980
2981 <h5>sslTrustStore</h5>
2982 <ul>
2983 denise.eckstein 1.1 <b>Description: </b>Specifies the location of the OpenSSL
2984 truststore. Consistent with the OpenSSL implementation, a
2985 truststore can be either a file or directory. If the truststore
2986 is a directory, all the certificates within the directory are
2987 considered trusted.<br>
2988 <b>Recommended Default Value (Development Build): </b>
2989 client.pem<br>
2990 <b>Recommended Default Value (Release Build): </b>
2991 $CERTIFICATEDIR/client.pem<br>
2992 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
2993 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
2994 <b>Dynamic?: </b>No<br>
2995 <b>Source Configuration File: </b>
2996 Pegsus/Config/SecurityPropertyOwner.cpp
2997 </ul>
2998
2999 <h5>sslTrustStoreUserName</h5>
3000 <ul>
3001 <b>Description: </b>Specifies the system user name to be
3002 associated with all certificate-based authenticated requests.<br>
3003 <b>Recommended Default Value (Development Build): </b>NONE<br>
3004 denise.eckstein 1.1 <b>Recommended Default Value (Release Build): </b>NONE<br>
3005 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3006 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/No<br>
3007 <b>Dynamic?: </b>No<br>
3008 <b>Considerations: </b>This property has no default; for
3009 security reasons, the system administrator must explicitly
3010 specify this value. This feature allows a single user
3011 name to be specified. This user will be associated
3012 with all certificates in the truststore. In the future,
3013 OpenPegasus will allow a system administrator to associate a
3014 distinct user name with each certificate.<br>
3015 <b>Source Configuration File: </b>
3016 Pegsus/Config/SecurityPropertyOwner.cpp<br>
3017 </ul>
3018
3019 <h5>traceComponents</h5>
3020 <ul>
3021 <b>Description: </b>Defines the components to be traced.<br>
3022 <b>Default Value: </b>""<br>
3023 <b>Recommended Default Value (Development Build): </b>""<br>
3024 <b>Recommended Default Value (Release Build): </b>""<br>
3025 denise.eckstein 1.1 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3026 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3027 <b>Dynamic?: </b>Yes<br>
3028 <b>Source Configuration File: </b>
3029 Pegasus/Config/TracePropertyOwner.cpp<br>
3030 </ul>
3031
3032 <h5>traceFacility</h5>
3033 <ul>
3034 <b>Description: </b>Defines the desired facility for trace
3035 messages. Valid values include: "File"
3036 and "Log".<br>
3037 <b>Default Value: </b>File<br>
3038 <b>Recommended Default Value (Development Build): </b>File<br>
3039 <b>Recommended Default Value (Release Build): </b>File<br>
3040 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3041 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3042 <b>Dynamic?: </b>Yes<br>
3043 <b>Case Sensitive?: </b>No<br>
3044 <b>Considerations: </b>If you specify "File",
3045 trace messagesare written into the file specified by the
3046 denise.eckstein 1.1 configuration option traceFilePath. If you specify
3047 "Log", trace messages are written to the
3048 OpenPegasus Log.<br>
3049 <b>Source Configuration File: </b>
3050 Pegasus/Config/TracePropertyOwner.cpp<br>
3051 </ul>
3052
3053 <h5>traceFilePath</h5>
3054 <ul>
3055 <b>Description: </b>Specifies the location of the
3056 OpenPegasus trace file.<br>
3057 <b>Default Value: </b>cimserver.trc<br>
3058 <b>Recommended Default Value (Development Build):</b>
3059 cimserver.trc<br>
3060 <b>Recommended Default Value (Release Build): </b>
3061 $TRACEDIR/cimserver.trc<br>
3062 <b>Recommend To Be Fixed/Hidden (Development Build):</b>No/No<br>
3063 <b>Recommend To Be Fixed/Hidden (Release Build): </b>Yes<br>
3064 <b>Dynamic?: </b>Yes<br>
3065 <b>Source Configuration File: </b>
3066 Pegasus/Config/TracePropertyOwner.cpp<br>
3067 denise.eckstein 1.1 </ul>
3068
3069 <h5>traceLevel</h5>
3070 <ul>
3071 <b>Description: </b></b>Defines the desired level of
3072 tracing. Valid values include: 0, 1, 2, 3, 4, 5.<br>
3073 <b>Default Value: </b>0<br>
3074 <b>Recommended Default Value (Development Build): </b>0<br>
3075 <b>Recommended Default Value (Release Build): </b>0<<br>
3076 <b>Recommend To Be Fixed/Hidden (Development Build): </b>No/No<br>
3077 <b>Recommend To Be Fixed/Hidden (Release Build): </b>No/Yes<br>
3078 <b>Dynamic?: </b>Yes<br>
3079 <b>Source Configuration File: </b>
3080 Pegasus/Config/TracePropertyOwner.cpp<br>
3081 </ul>
3082
3083 <h3>Configuration Constants</h3>
3084
3085 <h4>Definitions</h4>
3086
3087 <h5>static char CURRENT_CONFIG_FILE [] = </h5>
3088 denise.eckstein 1.1 <ul>
3089 <b>Description: </b>Default file name for the current
3090 configuration file.<br>
3091 <b>Recommended Default Value (Development Build):</b>
3092 cimserver_current.conf<br>
3093 <b>Recommended Default Value (Release Build): </b>
3094 $CONFIGDIR/cimserver_current.conf<br>
3095 <b>Dynamic?: </b>No <br>
3096 <br>
3097 <table border="1" cellspacing="1" bordercolordark="#666666"
3098 bordercolorlight="#CCCCCC" width=531
3099 style='font-size=10.0pt;font-family:Arial'>
3100 <tr>
3101 <th bgcolor="#CAE6CA" width="168">Platform</th>
3102 <th bgcolor="#CAE6CA" width=350>
3103 Source Configuration File</th>
3104 </tr>
3105 <tr align="center">
3106 <td width="168">Linux</td>
3107 <td align="left" width="350">
3108 Pegasus/Config/ConfigFileDirLinux.h</td>
3109 denise.eckstein 1.1 </tr>
3110 <tr align="center">
3111 <td width="168">HP-UX</td>
3112 <td align="left" width="350">ConfigFileDirHpux.h</td>
3113 </tr>
3114 <tr align="center">
3115 <td width="168">OpenVMS</td>
3116 <td align="left" width="350">
3117 Pegasus/Config/ConfigFileDirVms.h</td>
3118 </tr>
3119 </table>
3120 </ul>
3121
3122 <h5>static char PLANNED_CONFIG_FILE [] = </h5>
3123 <ul>
3124 <b>Description: </b>Default file name for the planned
3125 configuration file.<br>
3126 <b>Recommended Default Value (Development Build): </b>
3127 cimserver_planned.conf<br>
3128 <b>Recommended Default Value (Release Build): </b>
3129 $CONFIGDIR/cimserver_planned.conf<br>
3130 denise.eckstein 1.1 <b>Dynamic?: </b>No<br>
3131 <br>
3132 <table border="1" cellspacing="1" bordercolordark="#666666"
3133 bordercolorlight="#CCCCCC" width=531
3134 style='font-size=10.0pt;font-family:Arial'>
3135 <tr>
3136 <th bgcolor="#CAE6CA" width="168">Platform</th>
3137 <th bgcolor="#CAE6CA" width=350>
3138 Source Configuration File</th>
3139 </tr>
3140 <tr align="center">
3141 <td width="168">Linux</td>
3142 <td align="left" width="350">
3143 Pegasus/Config/ConfigFileDirLinux.h</td>
3144 </tr>
3145 <tr align="center">
3146 <td width="168">HP-UX</td>
3147 <td align="left" width="350">
3148 Pegasus/Config/ConfigFileDirHpux.h</td>
3149 </tr>
3150 <tr align="center">
3151 denise.eckstein 1.1 <td width="168">OpenVMS</td>
3152 <td align="left" width="350">
3153 Pegasus/Config/ConfigFileDirVms.h</td>
3154 </tr>
3155 </table>
3156 </ul>
3157
3158 <h5>static char CIMSERVER_START_FILE [] = </h5>
3159 <ul>
3160 <b>Description: </b>This is for the default file name
3161 for the cimserver startup file containing the PID.<br>
3162 <b>Default Value: </b>/tmp/cimserver_start.conf<br>
3163 <b>Recommended Default Value (Development Build): </b>
3164 /tmp/cimserver_start.conf<br>
3165 <b>Recommended Default Value (Release Build): </b>
3166 $PIDFILE<br>
3167 <b>Dynamic?: </b>No<br>
3168 <br>
3169 <table border="1" cellspacing="1" bordercolordark="#666666"
3170 bordercolorlight="#CCCCCC" width=531
3171 style='font-size=10.0pt;font-family:Arial'>
3172 denise.eckstein 1.1 <tr>
3173 <th bgcolor="#CAE6CA" width="168">Platform</th>
3174 <th bgcolor="#CAE6CA" width=350>
3175 Source Configuration File</th>
3176 </tr>
3177 <tr align="center">
3178 <td width="168">Linux</td>
3179 <td align="left" width="350">
3180 Pegasus/Config/ConfigFileDirLinux.h</td>
3181 </tr>
3182 <tr align="center">
3183 <td width="168">HP-UX</td>
3184 <td align="left" width="350">
3185 Pegasus/Config/ConfigFileDirHpux.h</td>
3186 </tr>
3187 <tr align="center">
3188 <td width="168">OpenVMS</td>
3189 <td align="left" width="350">
3190 Pegasus/Config/ConfigFileDirVms.h</td>
3191 </tr>
3192 </table>
3193 denise.eckstein 1.1 </ul>
3194
3195 <h3>Configuration Macros</h3>
3196
3197 <h4>Definitions</h4>
3198
3199 <h5>PEGASUS_SSLCLIENT_CERTIFICATEFILE</h5>
3200 <ul>
3201 <b>Description: </b><br>
3202 <b>Recommended Default Value (Development Build): </b>client.pem<br>
3203 <b>Recommended Default Value (Release Build): </b>
3204 $CERTIFICATEDIR/client.pem<br>
3205 <b>Dynamic?: </b>No<br>
3206 <b>Source Configuration File: </b>
3207 Pegasus/Common/Constants.h<br>
3208 </ul>
3209
3210 <h5>PEGASUS_SSLCLIENT_RANDOMFILE</h5>
3211 <ul>
3212 <b>Description: </b>On platforms that do not support
3213 /dev/random or /dev/urandom, OpenSSL will use this file to
3214 denise.eckstein 1.1 seed the PRNG (Pseudo-Random Number Generator). This
3215 PEGASUS_SSLCLIENT_RANDOMFILE defines the default CIM
3216 Client random file.<br>
3217 <b>Recommended Default Value (Development Build):</b>ssl.rnd<br>
3218 <b>Recommended Default Value (Release Build):</b>
3219 $RANDOMDIR/ssl.rnd<br>
3220 <b>Dynamic?: </b>No<br>
3221 <b>Considerations: </b>Use of this variable requires
3222 PEGASUS_HAS_SSL to be set. CIM Client use of a
3223 shared random file is not recommended. On systems where
3224 /dev/random or /dev/urandom are not available, CIM Clients are
3225 encouraged to generate a unique random file which
3226 contains sufficient entropy.<br>
3227 <b>Source Configuration File: </b>
3228 Pegasus/Common/Constants.h<br>
3229 </ul>
3230
3231 <h5>PEGASUS_SSLSERVER_RANDOMFILE</h5>
3232 <ul>
3233 <b>Description: </b>On platforms that do not support
3234 /dev/random or /dev/urandom, OpenSSL will use this file
3235 denise.eckstein 1.1 to seed the PRNG (Pseudo-Random Number Generator). This
3236 PEGASUS_SSLSERVER_RANDOMFILE defines the CIM Server
3237 random file.<br>
3238 <b>Recommended Default Value (Development Build): </b>
3239 cimserver.rnd<br>
3240 <b>Recommended Default Value (Release Build): </b>
3241 $RANDOMDIR/cimserver.rnd<br>
3242 <b>Dynamic?: </b>No<br>
3243 <b>Considerations: </b>1)Use of this variable
3244 requires PEGASUS_HAS_SSL to be set.(2) On systems where
3245 /dev/random or /dev/urandom are not available, CIM Server
3246 vendors need to be sure that the cimserver.rnd file
3247 contains sufficient entropy and is uniquely generated for
3248 each system.<br>
3249 <b>Source Configuration File: </b>
3250 Pegasus/Common/Constants.h<b><br>
3251 </ul>
3252
3253 <h5>PEGASUS_LOCAL_AUTH_DIR</h5>
3254 <ul>
3255 <b>Description:</b> </b>For local connections (i.e.,
3256 denise.eckstein 1.1 connectLocal), OpenPegasus uses a file-based authentication
3257 mechanism.<br>
3258 <b>Recommended Default Value (Development Build): </b>/tmp<br>
3259 <b>Recommended Default Value (Release Build): </b>
3260 $LOCALAUTHDIR/localauth<br>
3261 <b>Dynamic?: </b>No<br>
3262 <b>Source Configuration File: </b>
3263 Pegasus/Common/Constants.h<br>
3264 </ul>
3265
3266 <h5>PEGASUS_LOCAL_DOMAIN_SOCKET_PATH</h5>
3267 <ul>
3268 <b>Description: </b><br>
3269 <b>Recommended Default Value (Development Build): </b>
3270 /tmp/cimxml.socket<br>
3271 <b>Recommended Default Value (Release Build): </b>
3272 $SOCKETDIR/cimxml.socket<br>
3273 <b>Dynamic?: </b>No<br>
3274 <b>Source Configuration File: </b>
3275 Pegasus/Common/Constants.h<br>
3276 </ul>
3277 denise.eckstein 1.1
3278 <hr>
3279 <p><font size="2">
3280 Copyright (c) 2004 EMC Corporation; Hewlett-Packard Development
3281 Company, L.P.; IBM Corp.; The Open Group; VERITAS Software Corporation<br>
3282 Copyright (c) 2006 Hewlett-Packard Development Company, L.P.; IBM Corp.;
3283 EMC Corporation; Symantec Corporation; The Open Group.<br>
3284 <br>
3285 Permission is hereby granted, free of charge, to any person
3286 obtaining a copy of this software and associated documentation files
3287 (the "Software"), to deal in the Software without restriction,
3288 including without limitation the rights to use, copy,
3289 modify, merge, publish, distribute, sublicense, and/or sell copies
3290 of the Software, and to permit persons to whom the Software is
3291 furnished to do so, subject to the following conditions:
3292 <br><br>
3293 THE ABOVE COPYRIGHT NOTICE AND THIS PERMISSION NOTICE SHALL BE INCLUDED
3294 IN ALL COPIES OR SUBSTANTIAL PORTIONS OF THE SOFTWARE. THE
3295 SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
3296 KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
3297 OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
3298 denise.eckstein 1.1 NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
3299 BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
3300 ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
3301 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
3302 SOFTWARE.
3303 </font></p>
3304
3305 <hr>
3306 <p>Template last modified: January 20th 2004 by Martin Kirk<br>Template version: 1.6</p>
3307
3308 </body>
3309 </html>
|