1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
|
3 karl 1.93 Version 1.08 working towards 1.1 - Started 27 March 2002
|
4 karl 1.94 TAG: Version_1_08. Note that the tagging was not all simultaneous because
5 of problems with the CVS repository
|
6 karl 1.93
7 1. KS 27 March 2002 - Updaded pegasus version to 1.08. Tok snapshot.
8 Tagged CVS 1_08.
9
|
10 karl 1.94 2. KS 2 April 2002 -Add better qualifier testfunctions to cimclass,
11 qualifierlist, etc. and start to add specific qualifier tests on creates.
|
12 karl 1.93 ========================================================================
|
13 karl 1.59
14 Version 1.07 working towards 1.1 - Started 4 Feb 2002
15 Started just before cutover to the new dispatcher, etc.
16 TAG: VERSION_1_07
17
18 1. KS - Updated pegsusversion to 1.07 and tagged file.
19
|
20 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
21 karl 1.59
|
22 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
23 class to support PEGASUS_HOME dependent properties like Repository
24 location, Provider location and Consumer location.
25 The default location for these properties continue to be the same
26 as before. Added support to the Config Manager to own the
27 Pegasus Home variable and implemented method (getHomedPath) to
28 return absolute paths based from Pegasus Home.
29
30 For more information look in to the following files:
31 pegasus/src/Pegasus/Config/ConfigManager.h
32 pegasus/src/Pegasus/Config/ConfigManager.cpp
33 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
34 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
35
36 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
37 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
38 reset when a value is "set" or copied into them. the XML and MOF
39 also deliver a NULL value back when the state of the CIMValue is NULL.
40 There is a remaining addition to put an exception on CIMValue gets when
41 the NULL attribute is set that we will install later.
|
42 karl 1.63
|
43 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
44 karl 1.62
|
45 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
46 karl 1.64 Note that this version of the paper still needs work.
47
|
48 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
49 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
50 method is used. Added a new method lookupPort() in System.h to return the system
51 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
52 modified CIMClient connectLocal() interface.
53
|
54 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
55 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
56 will be deleted.
57
|
58 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
59
60 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
61 karl 1.66
|
62 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
63 checks for privileged user when performing authorization.
64 Added a configuration property enableRemotePrivilegedUserAccess.
65 This property needs to be set to true to enable privileged user access
66 for remote clients.
|
67 karl 1.66
|
68 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
69 method (InvokeMethod) operations. This change involves the addition
70 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
71 allows the server to determine the type of a parameter value without
72 having to look up the method definition in the schema. It also allows
73 the client API to do the same for output parameters as well as return
74 values.
75
76 PROVIDER IMPLICATIONS:
77
78 Method providers ARE affected by this change. Previously, all input
79 parameters to invokeMethod were sent to the provider as String type
80 regardless of what the client actually specified or how the method
81 was defined. With this change, providers will now receive input
82 parameters of the type that was actually specified by the client
83 application (regardless of how the method was defined in the schema).
84
85 However, parameters coming from clients other than the Pegasus client
86 API may omit the PARAMTYPE attribute. In this case, the operation
87 processor (currently dispatcher) will find these "typeless" parameters
88 and convert them to the correct type based on the method definition.
89 kumpf 1.68 The result is that if the client specifies the parameter type in the
90 XML encoding (as the Pegasus client API does), the method provider
91 will receive the type specified by the client; if the client does not
92 specify the parameter type, the method provider will see the type
93 specified in the method definition.
94
95 CLIENT IMPLICATIONS:
96
97 Clients ARE affected by this change. Any output parameters that are
98 returned from Pegasus (or other CIM servers using the PARAMTYPE
99 attribute) will now be received by Pegasus clients as the same type
100 sent by the server. Previously, they would have always been of
101 String type. In addition, the return value will be received as the
102 correct type rather than as a String.
103
104 Parameters coming from servers other than Pegasus may omit the
105 PARAMTYPE attribute. In this case, the client will see a
106 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
107 String. Similarly, return values coming from other servers that omit
108 PARAMTYPE will be seen by the client as String type. These return
109 values will NOT have the CIMType::NONE hint that parameters get,
110 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
111
112 This behavior will remain for the forseeable future (through
113 Pegasus version 2), as it is not possible to require that other
114 implementations use the PARAMTYPE attribute.
115
116 SIDE EFFECTS:
117
118 In the process of implementing this functionality, I discovered
119 that there was no way to set a CIMValue to be an array of
120 CIMReferences. This appeared to be an oversight, since method
121 parameters are permitted to be arrays of CIMReferences. I've
122 added the necessary functionality to the CIMValue class.
123
124 I also found that the CIMParamValue class needed significant
125 clean-up, which I completed.
126
127 SETPROPERTY CHANGES:
128
129 A similar problem in SetProperty operations was addressed by
130 "typing" the specified property value in the operation processor
131 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
132 relevant schema to get the property definition, and then converting
133 the specified value to that property's type.
134
135 The SetProperty operation encoding has not changed to accomodate
136 inclusion of type information that would obviate the need for this
137 extra processing. However, clients can avoid this overhead by using
138 ModifyInstance operations (with a property list) instead of SetProperty.
139
140 The GetProperty operation also has NOT been updated with type
141 information. Client applications using the Pegasus client API will
142 always receive String or reference values when calling GetProperty
143 against any server (Pegasus or not). Clients that require properties
144 to be returned as the correct type must use GetInstance (perhaps with
145 a property list) rather than GetProperty.
146
|
147 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
148 Instead of being composed of a CIMParameter and a CIMValue, this
149 class is now composed of a String (parameter name) and a CIMValue.
150 This change removes the redundancy of having the type, isArray,
151 and arraySize members in both the CIMParameter and the CIMValue.
152 The new CIMParamValue definition is more consistent with the XML
153 encoding of parameter values.
154
155 An isTyped member was also added to CIMParamValue to support the
156 behavior outlined in item 12 above. Clients should use the isTyped()
157 method to determine whether the output parameters returned from
158 InvokeMethod operations are of the correct type, or whether they
159 have defaulted to String type.
|
160 karl 1.70
161 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
162 Corrections to compiler for Null values input (parser and valuectory)
|
163 karl 1.72
|
164 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
165 username and password as parameters to connect() method, added a new
166 method diconnect() that closes the open connection with the server
167 and added code to handle HTTP Basic authentication challenges from
168 the server.
|
169 karl 1.72
170 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
171 all of the entires in the array. Bugzilla bug # 6.
172
|
173 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
174 to perform efficient lookup of instance provider, method provider, and
175 indication provider. Also, implemented provider registration instances
176 operations.
177
178 Modified registration provider to use latest provider registration schema.
|
179 karl 1.74
180 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
181 definition of CIMFlavors.
|
182 karl 1.76
|
183 kumpf 1.68
|
184 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
185 eliminate many of the redundant memory copies that resulted from the
186 nested method call structure. Now, instead of having a method at
187 each level that adds a begin tag, contents, and an end tag, there
188 are separate methods to add the begin and end tags. At the top
189 level, each of the begin tag methods are called, then the message
190 "body" is added, followed by calls to the end tag methods.
191
192 The message body is currently still copied twice, once into the XML
193 payload and then again when the HTTP header is added. (Since the
194 HTTP header contains a content length field, the header cannot be
195 constructed until the payload is complete.) It is possible to
196 remove these extra copies as well, but that would require additional
197 changes elsewhere in the code. For example, the HTTPMessage class
198 would need to hold the headers and payload separately rather than in
199 a single buffer.
200
201 Along with these changes, I did a lot of cleanup. Much of the XML
202 formatting code has been moved from CIMReference to XmlWriter. Also,
203 error message formatting has been consolidated in XmlWriter from the
204 various encoders and decoders, etc.
205 kumpf 1.75
206 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
207 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
208 that the information in the HTTP headers of a request is consistent
209 with what is encoded in the XML request itself.
210
211 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
212 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
213 validated.
|
214 karl 1.76
215 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
216 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
217 Compiler qualifier generation. Add tests for resolve processing.
|
218 karl 1.78
|
219 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
220 Previously, the client application constructed a client API using:
221
222 Monitor* monitor = new Monitor;
223 HTTPConnector* connector;
224 connector = new HTTPConnector(monitor);
225 Uint32 timeoutMillis = 60 * 1000; // optional
226
227 CIMClient client(monitor, connector, timeoutMillis);
228
229 With this change, the client application now looks like:
230
231 Uint32 timeoutMillis = 60 * 1000; // optional
232
233 CIMClient client(timeoutMillis);
234
235 The old style allowed an SSL context to be specified in the HTTPConnector
236 constructor. It seems that the SSL context is really a property of a
237 connection rather than of the client API. So instead of adding an SSL
238 context parameter to the CIMClient constructor, I added it to the CIMClient
239 connect() method. There are now forms of the connect() method with and
240 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
241 class to allow specification of an SSL context in the connect() method
242 rather than in the constructor.
243
244 NOTE: Client applications are affected and must be updated with this
245 change. I've already updated all the clients that are checked in and
246 included in the Pegasus build.
|
247 kumpf 1.79
|
248 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
249 of fixed length arrays to be lost.
|
250 kumpf 1.75
|
251 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
252 include the source filename and line number in the exception message.
253 However, for anyone who wishes to include such information in the
254 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
255 for that purpose.
256
257 A couple of changes have been made to the Tracer class:
258
259 - CIMException messages can now be put in a trace file using the Tracer.
260 A new interface has been added to the Tracer to accept a CIMException
261 as input and writes the exception message in the CIMException to the
262 trace file. This message will include the source filename and the
263 line number of the CIMException originator.
264
265 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
266
267 - Strings can now be traced using the Tracer class:
268 A new interface has been added to the Tracer to accept a String as
269 input and writes the String to the trace file.
270
271 (ex.)
272 kumpf 1.79 You can issue the following method call:
273 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
274
275 or use the following new macro:
276 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
277
|
278 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
279 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
280 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
281 the case where std::ios::binary is present with a bitwise OR operator.
282 This macro only works when the std::ios::binary is NOT the first
283 operator to be "OR"ed.
|
284 ramnath 1.81
285 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
286 Pegasus could build and run on Tru64 unix. Finished replacing instances
287 of ios::binary with the macros PEGASUS_IOS_BINARY and
288 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
289 streams. Tru64 does not support the use of the " != " operator on a
290 fstream object. Instances of such were either modified or an ifdef
291 block detecting a build on Tru64 was used. Added cstdarg and ctime in
292 pegasus/src/stdcxx/cwrappers/ directory.
|
293 ramnath 1.80
|
294 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
295 again be installed as a Windows service. The repositoryRootPath could
296 not be found, because the pegasusHome variable was not being set properly
297 in the Windows service work thread.
298
|
299 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
300 local repository (cimmofl) and a client interface repository (cimmof)
301 executable
302
303 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
304 executable.
|
305 kumpf 1.84
306 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
307 Sint* values in XmlReader.cpp. Previously, values that were out of
308 range were simply truncated to fit the given integer size. An
309 exception is now thrown when the given string can not be parsed into
310 an integer of the specified size.
311
|
312 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
313 in XmlReader.cpp.
314
|
315 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
316 Authentication handling code and cleaned up ATTN's in the authentication
317 releated files. Implemented a new AuthenticationInfoRep class and modified
318 the related files. Added more test cases to test the authentication classes.
319
|
320 karl 1.88 33. (Ramnath Ravindran - Compaq) 21 March 2002 - replaced instances of "| ios::binary"
321 with PEGASUS_OR_IOS_BINARY in 3 files: System.cpp, InstanceIndexFile.cpp, and
|
322 ramnath 1.87 InstanceDataFile.cpp
|
323 karl 1.88
324 34. (KS) 25 March 2002 - Extended qualifier resolution to correctly handle Flavors nad
325 enabled the scope and flavors testing. Had been pretty much blocked before.
326
|
327 kumpf 1.89 35. (Roger Kumpf - HP) 26 Mar 2002 - Created a class to map CIM operation
328 request messages to provider API calls. Cleaned up the dispatcher and
329 added the ability to pass requests to control providers through the
330 ModuleController. Integrated the ConfigSettingProvider with the
331 ModuleController and set up the structure for getting the control
332 providers working. Moved the ConfigSettingProvider from the
333 Providers tree to the Pegasus tree, since it really is statically
334 linked into the server.
|
335 karl 1.88
|
336 kumpf 1.90 36. (Roger Kumpf - HP) 27 Mar 2002 - Integrated the UserAuthProvider with
337 the ModuleController as a control provider. Moved the UserAuthProvider
338 from the Providers tree to the Pegasus tree.
339
|
340 kumpf 1.91 37. (Roger Kumpf - HP) 27 Mar 2002 - Integrated the
341 ProviderRegistrationProvider with the ModuleController as a control
342 provider. Moved the ProviderRegistrationProvider to the Pegasus
343 ControlProviders directory. Obsoleted and removed the
344 Server/ConfigurationManager class and files.
|
345 karl 1.92
346 38. (KS) 27 march 2002 - Modifications to common functions and the compiler to
347 extend the processing of class creation and correct the flavors and their
348 use. This allows flavors to be inherited with rules for override, etc.
349
|
350 kumpf 1.91
|
351 karl 1.59 -------------------------------------------------------------------
|
352 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
353
354 1. Merged back to Main branch. All general development will be in main branch
355 in the future with releases in side branches. Special side developments
356 may temporarily be in side branches.
357 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
358 karl 1.53
359 2. (Karl) 18 December 2001 - Added new directory repositories where repository
360 implementations will be kept to separate them from the
361 repository interface defintion. Initial implementation is genericfile
362 which is the current file based repository.
363
364 Added new build variable RMREPOSITORY which is a generic MAKE command
365 to remove an existing repository. It simply substitutes for the RMDIRHIER
366 command at this point but we will make this a generic part of system
367 in the future.
|
368 karl 1.52
|
369 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
370 to check that all required parameters for intrinsic methods are
371 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
372 exception is thrown. Also added checks for duplicate parameters in the
373 intrinsic methods. If a parameter is specified more than once, a
374 CIM_ERR_INVALID_PARAMETER exception is thrown.
375
|
376 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
377 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
378 queue to this new queue. Modified CIMServer.cpp to create
379 CIMOperationRequestAuthorizer queue only when authorization is enabled.
380 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
381 it available to the CIMOperationRequestDispatcher.
382
|
383 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
384 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
385 forever. The problem was noticed when the TestClient program and CIMserver
386 service were both running. The service wasn't accessible to the TestClient
387 program.
388
|
389 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
390 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
391 in new queue, IndicationService which will get invoked from dispatcher.
392 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
393 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
394 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
395 CIM_GET_INSTANCE_REQUEST_MESSAGE
396 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
397 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
398
399 This new service will also take care of processing the indications on receiving
400 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
401 IndicationProvider or some other mechanism which is not yet clear.
402
403 IndicationService will also receive following messages from PG_ProviderRegistration
404 when a new IndicationProvider will get registered.
405 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
406 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
407
408 I had also defined new Indication Provider APIs, enableIndication, disableIndication
409 and modifyIndication with more parameters passed and eventually planning to terminate
410 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
411 plan to implement one more call as startIndication and will be done soon.
412
413 There are three new test programs in IndicationService directory, which will create
414 Filter, Indication and Subscription instances using IndicationService.
415
416 Also modified sample IndicationProvider code with the new APIs introduced.
|
417 mary 1.56
|
418 karl 1.52 -------------------------------------------------------------------------
|
419 karl 1.1
|
420 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
421 current working dev branch of build
|
422 mike 1.36
|
423 karl 1.49 ---------------------------------------------------------------------------
424 Version 1.1 - July 2001 Development branch (Work in PRogress)
425
|
426 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
427 PARAMETER.REFERENCE constructs for references).
428
429 2. (Mike Brasher) Reworked server communication into new module scheme.
|
430 mike 1.51 =======
431 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
432 seen as part of CGIclient class displays.
433
434 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
435 to the final version in Schemas\CIM25. This included minor
436 corrections, etc and a couple of file changes. This is the
437 official final CIM 25 schema relesed by the DMTF. This change
438 should not affect any current work.
439 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
440 directorys. Note however that today the make repository still
441 loads the 2.5 schema.
442
443 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
444 on XML output.
445
446 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
447 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
448 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
449 declarations in for loop initializers outside the loop, so multiple
450 "for (int i=0; i<10; i++);" statements cause a compile error.
451 mike 1.51
452 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
453 dependency on the config files at the start of the cimserver. Now the
454 cimserver will use in-memory default values in the absence of config files
455 and command line options. Fixed a few defects in the config framework that
456 were causing cimom to crash under certain conditions. Changed the config
457 provider class name to 'PG_ConfigSetting' in the mof file and modified
458 provider implementation files accordingly. Also modified the config CLI
459 to show user friendly error/status messages.
460
461 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
462 (reported incorrect line number on error in XML request if input redirected).
463 Enhanced the -d debug command line option to allow more flexibility in
464 generating debug output.
465
466 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
467 xml when it generates xml output.
468
469 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
470 a common file to reduce the number of files required by the default
471 repository implementation.
472 mike 1.51
473 10. (Mike Brasher) - Fixed minor bug in repository implementation.
474
475 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
476
477 12. (Mike Brasher) - Committed rework of server into queue approach.
478
479 13. (Mike Brasher) - New webserver and webclient examples.
480
481 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
482
483 15. (Mike Brasher) - Initial work on refactorying client into modules.
484 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
485
486 16. (Mike Brasher) - queue-based clients now complete.
487
488 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
489
490 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
491
492 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
493 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
494 a web server. See doc/Servlet for more information.
495
496 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
497 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
498 input and output can be written in a trace file.
499
500 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
501 Created new class SignalHandler that allow registration, activation and
502 deactivation of signal handler functions (Linux only !).
503
504 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
505 ExportClient to support ExportIndication. DisplayConsumer, a sample
506 consumer is added which will consume (by displaying on screen) the
507 indication exported by CIMExportRequestDispatcher. This complete
508 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
509 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
510 are modified to implement above messages.
511
512 XmlIndicationDispatcher test program is modified to test complete
513 operation. It now creates a consumer, handler and indication
514 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
515 indication to consumer. This program needs
516 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
517 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
518 in the repository to complete the test successfully. This test
519 program also needs Handler qualifier defined in repository and
520 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
521 below:
522
523 //====================================================================
524 // CIM_IndicationHandlerXMLHTTP
525 //====================================================================
526 [Description (
527 "CIM_IndicationHandlerXMLHTTP describes the destination for "
528 "Indications to be delivered via HTTP, using a cimXML "
529 "representation."), Handler ("CIMxmlIndicationHandler") ]
530
531 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
532 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
533 a provider library.
534
535 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
536 interface for the provider. InvokeMethod currently uses CIMValue as
537 type for inParameters and outParameters, which are unable to give
538 information about param name, type and value. This should be changed
539 to CIMParamValue which will help providers to know details of the
540 parameter name and type along with value passed through InvoleMethod
541 call. Current implementation uses CIMParamValue as parameters while
542 travelling through message queues and converts it back to array of
543 CIMValue before calling Provider API (which needs to be changed
544 later).
545
546 Also added are two test programs:
547
548 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
549 CIMParamValue class.
550
551 src/Pegasus/Client/tests/InvokeMethod - which makes call to
552 InvokeMethod and displays the return value. Current
553 implementation assumes that provider had returned true value
554 and outParameters (which are now hard coded in
555 CIMOperationRequestDispatcher to implement functionality)
556 mike 1.51 which are passed as response of InvokeMethod to client.
557
558 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
559 authentication to the pegasus code. Created an Authentication Manager
560 and authenticator interfaces. The file based local authentication
561 module has been modified to implement the local authenticator
562 interface, to generate the challenge for the unauthorized requests
563 and to verify the authentication.
564
565 A skeleton program has been created for the Basic Authenticator.
566 This code is in the Security/Authentication directory which is not
567 yet linked into the build.
568
569 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
570 Decoders. Earlier decoders were sending requests and responses
571 before finishing complete Xml parse. This was prone to send
572 request/response even the Xml is wrong after the MethodCall.
573 New changes collects the Message* as return value from the
574 appropriate functions while parsing the Xml and sends on
575 _outputQueue only when Xml is parsed successfully.
576
577 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
578 fix the problem with constructing provider name and loading the
579 providers for unix platforms. Also moved the shared library name
580 construction (appending .sl or .so) from
581 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
582 ProviderModule.cpp and included it in a method that returns
583 provider file path name.
584
585 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
586 Handler. This handler extracts MappingStrings qualifier from class
587 definition and converts it into SNMP specific trap data. The trap
588 structure is defined in a abstract class in snmpDeliverTrap.h file.
589 Every one has his or her own SNMP agent, which will talk with master
590 agent to deliver the trap or may have some other mechanism.
591 Extending snmpDeliverTrap class and deliverTrap method will help to
592 implement specific trap delivery mechanism.
593
594 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
595 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
596 property value to be default in the plan file, remove the property from the
597 plan file. Converted ConfigSettingProvider to use provider2 library.
598 mike 1.51
599 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
600 to allow tracing of a specific number of bytes in a given
601 string. Also modified the XmlIO trace code to use the new interface.
602 Changed the config file defaults for tracing.
603
604 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
605 NonStop platform (NSK) in directory pegasus/mak. The following files
606 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
607 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
608 program-unix.mak. The original program.mak which previously covered
609 all platforms was split into platform-specific make files, and now
610 only contains conditionals. Files config.mak, objects.mak, and
611 library.mak were changed to include the NSK files.
612 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
613
614 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
615 commas (,) in the string values of key properties.
616
617 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
618
619 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
620 pegasus/mak/program-windows.mak that prevented program builds for
621 the windows platform (related to change from 28 Oct). Replaced
622 leading whitespace in front of commands with tabs as required
623 in make files.
624
625 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
626 because getting an error in 26
627
628 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
629 whose types are references. These reference values must be
630 treated specially in the XML encoding, using the VALUE.REFERENCE
631 tag structure.
632
633 Pegasus had been passing reference values simply as String values.
634 For example, EnumerateInstanceNames returned KEYVALUEs of string
635 type rather than VALUE.REFERENCEs.
636
637 I've modified the XmlReader::getKeyBindingElement() and
638 CIMReference::instanceNameToXml() methods to read and write the
639 XML in the proper format. However, making that change required
640 mike 1.51 that a CIMReference object be able to distinguish between a key
641 of String type and a key of reference type.
642
643 I've modified the String format of CIMReferences slightly to
644 allow efficient processing of references whose keys are also of
645 reference type. The "official" form uses the same encoding for
646 key values of String type and of reference type, and so it
647 would be necessary to retrieve the class definition and look up
648 the types of the key properties to determine how to treat the
649 key values. This is clearly too inefficient for internal
650 transformations between CIMReferences and String values.
651
652 The workaround is to encode a 'R' at the beginning of the value
653 for a key of reference type (before the opening '"'). This allows
654 the parser to know a priori whether the key is of String or
655 reference type.
656
657 In this example:
658
659 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
660
661 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
662 the usual encoding. Key2 is a reference property, so the extra 'R'
663 is inserted before its encoded value. Note that this algorithm is
664 recursive, such that RefClass could include KeyC of reference type,
665 which would also get encoded with the 'R' notation.
666
667 The toString() method inserts the 'R' to provide symmetry. A new
668 KeyBinding type (REFERENCE) has been defined to denote keys in a
669 CIMReference that are of reference type. This KeyBinding type must
670 be used appropriately for CIMReference::ttoString() to behave
671 correctly.
672
673 The files that have been modified to make this change are
674 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
675
676 A result of this change is that instances names in the instance
677 repository will include this extra 'R' character. Thus, you will
678 need to repopulate your repository when you download the latest
679 CIMOM version.
680
681 Note that for user-facing uses of the String encoding of instance
682 mike 1.51 names (such as might appear in MOF for static association
683 instances or in the CGI client), this solution is non-standard and
684 therefore unacceptable. It is likely that these points will need
685 to process the more expensive operation of retrieving the class
686 definition to determine the key property types.
687
688 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
689 in case of error in setting trace components. Modified the property owner
690 init and update methods. Submitted the pegasus/mak/Buildmakefile with
691 cleanbuild, rebuild and trace configuration options.
692
693 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
694 (instanceName).
695
696 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
697 GetProperty/SetProperty/EnumerateInstances request/response messages.
698 Added encoding and decoding of PropertyList parameters on all
699 relevant intrinsic methods.
700
701 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
702 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
703 mike 1.51
704 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
705 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
706 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
707 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
708 SystemNsk.cpp) contain stubs. The associated control files
709 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
710 nsk platform links.
711
712 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
713 toString() method for CIMValues of String type. The old behavior
714 returned an XML encoding of the String with special characters
715 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
716 would be returned as a"b. The new behavior just returns the
717 String value directly with no translation. (Note that
718 CIMValue.toXml() may still be used to get the XML-encoded value.)
719
720 This change was necessary in part to correct the behavior of the
721 repository. CreateInstance stores the instance name returned by
722 CIMInstance.getInstanceName(), which is built using calls to
723 CIMValue.toString(). GetInstance searches for the instance name
724 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
725 be successful, CreateInstance must have stored the instance name
726 in that same form, without special character encoding.
727
728 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
729 the CIMValue class. Eliminated improper use of CIMValue.toString(),
730 often replacing with CIMValue.get(String&) or CIMValue.toXml().
731 Also added some error handling in the indication handlers.
732
733 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
734 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
735 to handle local instance path and local classpath. Modified the
736 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
737 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
738
739 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
740 to hold the argument to ModifyInstance and the return values
741 from EnumerateInstances. The client and provider APIs need to
742 be updated to use this class.
743
744 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
745 mike 1.51 source files. This CLI allows addition, modification, removal and listing
746 of CIM users. The CLI is not linked to the main makefile as the Provider
747 functionality is yet to be implemented. Added the function
748 String getPassword(char* prompt) to the System.h and cpp files.
749
750 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
751 the server to challenge the unauthorized requests, authenticate
752 the challenge responses, and verify the subsequent authorized requests.
753 Implemented authentication mechanism on the Client api to send
754 responses to the challenges from the server. Current implementation
755 supports only 'local' authentication mechanism.
756
757 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
758
759 - Changed the return value of EnumerateInstances from Array<CIMInstance>
760 to Array<CIMNamedInstance>
761 - Changed the parameter to ModifyInstance from CIMInstance to
762 CIMNamedInstance
763 - Added an optional PropertyList parameter to ModifyInstance
764 - Changed all handling of PropertyList parameters to use the
765 CIMPropertyList class instead of Array<String>
766 mike 1.51
767 Each of these changes was required to comply with the DMTF specification.
768
769 These changes were made throughout the system except for in the provider
770 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
771 differences from providers, so older providers will continue to function.
772 However, this means that clients can not yet take advantage of the added
773 functionality.
774
775 When the provider API is updated, the following changes will be visible:
776
777 - Providers will get a PropertyList parameter to ModifyInstance which
778 they are required to respect. Providers that can not process the
779 PropertyList must throw a NOT_SUPPORTED exception whenever the
780 list is not null. Clients can take advantage of this change by
781 issuing a ModifyInstance request against a selected set of
782 properties in an instance, rather than being required to replace
783 the entire instance.
784
785 - Providers will be required to return instance names along with
786 instances in the EnumerateInstances method. Clients will receive
787 mike 1.51 these instance names, as the standard dictates.
788
789 - Providers will receive a CIMPropertyList argument containing the
790 PropertyList instead of an Array<String>. This change allows
791 providers to distinguish between an empty list and a null list.
792
793 Note that the repository also does not yet handle the PropertyList in
794 ModifyInstance correctly.
795
796 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
797 provider API to match the changes made to the EnumerateInstances and
798 ModifyInstance operations. These changes were made to comply with
799 the DMTF specification.
800
801 The original Provider API has not been updated, and I have no
802 plans to do so. Providers written to the original API will
803 continue to function, but they will not have the opportunity
804 to take advantage of the features that have been added.
805
806 The significant changes to the Provider2 API are:
807
808 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
809 they are required to respect. Providers that can not process the
810 PropertyList must throw a NOT_SUPPORTED exception whenever the
811 list is not null. Clients can take advantage of this change by
812 issuing a ModifyInstance request against a selected set of
813 properties in an instance, rather than being required to replace
814 the entire instance.
815
816 - Providers will get an IncludeQualifiers parameter to ModifyInstance
817 which they are required to respect. If IncludeQualifiers is
818 false, the qualifiers on the modified instance provided must not
819 be used to update the instance.
820
821 - Providers will be required to return instance names along with
822 instances in the EnumerateInstances method. Clients will receive
823 these instance names, as the standard dictates.
824
825 The providers that are in the Pegasus build have all been updated.
826 However, whenever the PropertyList is not null, the providers throw
827 a NOT_SUPPORTED exception.
828
829 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
830 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
831 the Common module. File Config.h was modified to include the NSK
832 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
833 without the standard (std) namespace.
834
835 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
836 properties to support alternate behavior of the Pegasus repository:
837 repositoryIsDefaultInstanceProvider and repositoryProviderName.
838
839 Using the first one, the repository can be enabled/disabled as the
840 default provider for instance (and association) operations. The default
841 setting is "true", so the default behavior has not been changed. To
842 disable the repository as the default instance provider, issue the
843 following command before starting cimserver:
844
845 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
846
847 The repositoryProviderName configuration property specifies what
848 provider name is used to explicitly register the repository as a
849 provider. This is necessary when the repository needs to serve
850 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
851 to "false". The default value is "repository". To register the
852 repository as an instance provider for a class, add a
853 'Provider("repository")' qualifier to the class definition.
854
855 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
856 pass to providers that act as services. This handle provides
857 service providers with access to the CIMServer data structures.
858
859 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
860 the repository so that it respects the IncludeQualifiers and
861 PropertyList parameters. Updated SetProperty in the repository
862 so that it uses ModifyInstance correctly. The repository now
863 supports GetProperty and SetProperty in addition to ModifyInstance.
864
865 Implemented GetProperty and SetProperty in the Dispatcher and
866 Provider2 so that they get translated to GetInstance and
867 ModifyInstance calls (respectively) in the provider. Providers
868 written to the Provider2 API that correctly process the new
869 ModifyInstance parameters will automatically support SetProperty
870 operations. Note that GetProperty and SetProperty currently only
871 mike 1.51 work for String properties because of an XML encoding limitation.
872
873 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
874 Security components for authentication and authorization.
875
876 Authentication and User Management:
877 cimuser CLI : This CLI is used for addition, modification, removal
878 and listing of CIM Users. The CIM user password is encrypted and stored
879 in a file. The password file format is compatible with Apache's htpasswd
880 generated password file.
881
882 cimauth CLI implement the authorization managment functionality by letting
883 to add/remove/list user authorizations.
884
885 User Manager and User Manager Provider components implement the user
886 management and authorization functionality.
887
888 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
889 under src/Pegasus/WQL which contains library and BNF.
890
891 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
892 mike 1.51 which does provider registration, block, unblock, and stop a provider.
893 It also alert Subscription Service of any provider registration changes.
894
895 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
896 and String.cpp with PEG_min. The _min macro caused problems on the
897 NSK platform because of a duplicate definition in a standard file.
898
899 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
900 subscription service provider that serves as the instance provider for the
901 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
902 classes (from CIM_Events27.mof). The service also takes appropriate action
903 in response to startup, shutdown of the cimom, termination of a provider,
904 or change in provider registration.
905
906 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
907 and the command line interface for shutting down cimom gracefully.
908 For more information, refer to the CIMOM Shutdown working paper
909 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
910
911 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
912 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
913 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
914 constructor to set a pointer to the server-, resp. client wide SSL_Context
915 structure. The Socket field in HTTPConnection is substituted with an
916 MP_Socket pointer, a class that is designed to hide the differences
917 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
918 is defined even in a non-ssl environment.
919 How to use it in a Server or Client:
920 1. Just create an SSL_Context once per Server/Client address space
921 2. Construct every HTTPConnector/Acceptor with a pointer to this
922 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
923 without SSL_Context for conventional connections.
|
924 mike 1.50
|
925 mike 1.51 The Configuration data was extended with the boolean SSL property, and
926 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
927
928 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
929 kumpf 1.61
|
930 mike 1.51 ---------------------------------------------------------------------------
931 Version 1.1 - July 2001 Development branch
932 Tagged as version_1_01 on 3 August 2001 (sorry should have been
933 1.1
934
935 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
936 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
937 and ExportClient classes. the indication.
938
939 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
940 make the delivery of indications over Xml-HTTP and email respectively.
941
942 Provided examples for HandlerTable, XmlIndicationDelivery and
943 SendMailIndicationDelivery to support this implementation.
944
945 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
946 library and a thread-safe message queue (first stage). Classes defined
947 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
948 and SimpleThread.
949
950 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
951 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
952 information on using wbemexec. A simple test script is included. Please
953 see pegasus/src/Clients/wbemexec/tests/readme for information on running
954 the test script.
955
956 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
957 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
958 and
959 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
960 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
961 src/Pegasus/Common/TraceFileHandler.cpp.
962
963 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
964 Config CLI. Please refer to the documentation
965 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
966 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
967 using the config framework and cimconfig CLI. Make sure to load the config
968 mof (src/gmake config) before starting the cimserver. A simple test script
969 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
970 information on running the test script.
971
972 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
973 (changed the H and CPP files for the major CIM objects. These
974 functions generate CIM MOF output for the objects.
975
976 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
977 Authentication provides security mechanism to authenticates CIM clients
978 that
979 connect to CIM Server on the same system without having to specify a
980 password.
981 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
982 This component only works on unix and it's not linked in with the main
983 build.
984 When authentication framework is defined this component may need to be
985 modified to integrate with the framework.
|
986 karl 1.49
987 ---------------------------------------------------------------------------
988 Version 0.99.x (Fixes to version 0.99) in Process
|
989 mike 1.51
|
990 karl 1.49 NOTE: Please do not input anything to this branch except for critical
991 fixes. This is, in effect, 1.0 and we do not want to use it for
992 development.
993
994 ----------------------------------------------------------------------------
995
996 Version 0.98.0 - Work in progress (This number skipped)
|
997 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
998 mike 1.36
|
999 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
1000 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
1001
|
1002 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
1003 in the HTML URL reference for passing instance names.
1004
|
1005 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
1006
1007 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
1008
|
1009 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
1010 allow slp to compile.
1011
|
1012 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
1013
1014 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
1015 ids to queue pointers).
1016
|
1017 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
1018 and Dispatcher.
1019
|
1020 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
1021 and
1022 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
1023 chip 1.44 ResponseHandler for Provider2 interface.
|
1024 mike 1.45
1025 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
1026
1027 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
1028
|
1029 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
1030
|
1031 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
1032
1033 12. (Mike Brasher) - Fixed compiler error on Linux.
1034
|
1035 karl 1.38 ------------------------------------------------------------------------------
1036 --
|
1037 mike 1.26
|
1038 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
1039 karl 1.16
1040 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1041 for NT and Linux platforms.
|
1042 mike 1.26
|
1043 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1044 5988.
1045 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1046 the DMTF.
|
1047 mike 1.26
|
1048 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1049 Fusion event. THis included a) extended the test for end of HTTP header from
1050 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1051 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1052 mike 1.26
|
1053 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1054 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1055 revamping the compiler to work independently of the repository (grb).
|
1056 mike 1.26
|
1057 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1058 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1059 Now when you build normally, you will get the committed grammar and parser
1060 files instead of generating your own for a particular platform. This should
1061 prevent back-level lex and yacc implementations from generating troublesome
1062 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1063 bob 1.20 (grb)
|
1064 mike 1.26
|
1065 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1066 This change paves the way for upcoming changes that will allow the compiler
1067 to work indepently of the repository. (grb)
|
1068 mike 1.26
|
1069 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1070 mike 1.26
|
1071 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1072 modifyClass,
|
1073 chip 1.22 createClass to protect caller's object.
|
1074 mike 1.26
|
1075 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1076 directory. These
1077 interfaces allow very smart providers to perform advances operations.
1078 CIMProviderStub has
|
1079 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1080 mike 1.26
|
1081 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1082 mike 1.26
|
1083 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1084 repository you make world, make rebuild or make repository. ks
|
1085 mike 1.26
1086 12. Added associators() and associatorNames() operations to CIM repository.
|
1087 mike 1.27 (MEB)
1088
1089 13. More on association implementation (all four operations supported).
1090 Need to handle deletion of associations and protocol stubs still.
1091 Need to test class associations (rather than just instance associations).
1092 Need to handle deleteInstance().
1093 (MEB)
|
1094 mike 1.26
|
1095 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1096
|
1097 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1098 AssociationName
|
1099 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1100 pages.
1101
|
1102 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1103 sage 1.31
1104 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1105 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1106 Made cimserver accept the -D flag to eliminate the need for environment
1107 variables.
|
1108 mike 1.32
1109 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1110 References() and ReferenceNames() CIM operations. These only operate
1111 on instances at this time. They will operate on classes soon.
|
1112 kumpf 1.34
1113 19. (Mike Glantz) Extended and modified dynamic support
1114 changes to (1) work on HP-UX and (2) have all images and libraries
1115 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1116 change is to program.mak and library-unix.mak, removing specific
1117 lists of dynamic library specs and putting them in the Makefile
1118 and libraries.mak files that build the actual targets (lots of
1119 these now have DYNAMIC_LIBRARIES defined).
|
1120 karl 1.35
1121 20. (Karl) added basic Queue function to common (based on array) and added
1122 tests for stack and queue.
|
1123 karl 1.38
1124 ------------------------------------------------------------------------------
1125 --
|
1126 mike 1.36
|
1127 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1128 karl 1.11
|
1129 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1130 CIMServer (both)
|
1131 karl 1.11 Functions added include:
1132 a. Enable trace to log file.
|
1133 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1134 is
|
1135 karl 1.11 trace to log, -t is trace to console).
1136 c. add parameter in optionsrow for help message and enable the capture
|
1137 karl 1.12 of these messages in Options class. Also added help print that
1138 prints these things out. However, format not to beautiful.
|
1139 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1140 e. Extend the Clients\testclient so he does tests on Namespace.
|
1141 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1142 mike 1.33
|
1143 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1144 mike 1.33
|
1145 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1146 logs
|
1147 karl 1.12 are put
|
1148 mike 1.33
|
1149 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1150 This is a preliminary version.
|
1151 mike 1.33
|
1152 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1153 karl 1.13 throws CannotBind exception.
|
1154 mike 1.33
|
1155 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1156 not
|
1157 karl 1.14 print out all of the message. At the least it prints out the error message
1158 and components of the message causing the problem.
|
1159 mike 1.33
|
1160 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1161 mike 1.33
|
1162 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1163 karl 1.14 existed.
|
1164 mike 1.33
1165 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1166 karl 1.15
|
1167 karl 1.29 ------------------------------------------------------------------------------
1168 --
|
1169 karl 1.6 Version 0.97.2
1170
1171 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1172 2. Extend Formatter for Boolean and Uint32 types.
1173 3. Change CIM Server to use Trace (-t) flag. This also changed
1174 Handler.h to work off of flag.
1175 4. Minor corrections to __Namespace Provider.
1176 5. Extend tests for Formatter, String, and other modules.
1177 6. Correct errors in documentation.
1178 7. New working papers (provider interface).
|
1179 karl 1.8 8. Add Providerreg.exe tool.
1180 9. Add trace output for messages sent from the Server.
|
1181 mike 1.26
|
1182 karl 1.29 ------------------------------------------------------------------------------
1183 --
|
1184 mike 1.26
|
1185 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1186 karl 1.5
|
1187 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1188 find functions. Note: This symbol is defined in config.h. (ks).
1189
|
1190 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1191 of dynamic lib loaading.
|
1192 karl 1.1
1193
|
1194 karl 1.29 ------------------------------------------------------------------------------
1195 --
|
1196 mike 1.26
|
1197 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1198 karl 1.1
1199 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1200 qualifiers, methods.
1201 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1202 methods.
1203 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1204 qualifiers and to
1205 remove qualifiers.
1206 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1207 compiler. It probably imposed more limitations than would be required with
|
1208 karl 1.2 the current compiler. This version of the port produces an excessively large
1209 common module due to template bloat. That problem will be fixed in a future
1210 change to the port. Also there are a log of duplicate symbol warnings generate
1211 by the AIC compiler but these cause no problems. The port has been tested
1212 with the complete unit test and client/server test successfully.
|
1213 karl 1.1
1214 --------------------------------------------------------------------------
|
1215 karl 1.2
|
1216 mike 1.4 23 May 2001
|
1217 karl 1.1
|
1218 mike 1.9 1. Ported to HPUX
|
1219 karl 1.5
|
1220 mike 1.9 --------------------------------------------------------------------------
1221
1222 29 May 2001
1223
1224 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1225 mike 1.51
1226
1227
1228
|
1229 karl 1.48
|
1230 karl 1.38
|
1231 karl 1.30
|
1232 karl 1.29
|
1233 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc