1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
|
3 karl 1.93 Version 1.08 working towards 1.1 - Started 27 March 2002
4 TAG: Version_1_08
5
6 1. KS 27 March 2002 - Updaded pegasus version to 1.08. Tok snapshot.
7 Tagged CVS 1_08.
8
9 2.
10 ========================================================================
|
11 karl 1.59
12 Version 1.07 working towards 1.1 - Started 4 Feb 2002
13 Started just before cutover to the new dispatcher, etc.
14 TAG: VERSION_1_07
15
16 1. KS - Updated pegsusversion to 1.07 and tagged file.
17
|
18 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
19 karl 1.59
|
20 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
21 class to support PEGASUS_HOME dependent properties like Repository
22 location, Provider location and Consumer location.
23 The default location for these properties continue to be the same
24 as before. Added support to the Config Manager to own the
25 Pegasus Home variable and implemented method (getHomedPath) to
26 return absolute paths based from Pegasus Home.
27
28 For more information look in to the following files:
29 pegasus/src/Pegasus/Config/ConfigManager.h
30 pegasus/src/Pegasus/Config/ConfigManager.cpp
31 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
32 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
33
34 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
35 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
36 reset when a value is "set" or copied into them. the XML and MOF
37 also deliver a NULL value back when the state of the CIMValue is NULL.
38 There is a remaining addition to put an exception on CIMValue gets when
39 the NULL attribute is set that we will install later.
|
40 karl 1.63
|
41 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
42 karl 1.62
|
43 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
44 karl 1.64 Note that this version of the paper still needs work.
45
|
46 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
47 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
48 method is used. Added a new method lookupPort() in System.h to return the system
49 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
50 modified CIMClient connectLocal() interface.
51
|
52 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
53 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
54 will be deleted.
55
|
56 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
57
58 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
59 karl 1.66
|
60 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
61 checks for privileged user when performing authorization.
62 Added a configuration property enableRemotePrivilegedUserAccess.
63 This property needs to be set to true to enable privileged user access
64 for remote clients.
|
65 karl 1.66
|
66 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
67 method (InvokeMethod) operations. This change involves the addition
68 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
69 allows the server to determine the type of a parameter value without
70 having to look up the method definition in the schema. It also allows
71 the client API to do the same for output parameters as well as return
72 values.
73
74 PROVIDER IMPLICATIONS:
75
76 Method providers ARE affected by this change. Previously, all input
77 parameters to invokeMethod were sent to the provider as String type
78 regardless of what the client actually specified or how the method
79 was defined. With this change, providers will now receive input
80 parameters of the type that was actually specified by the client
81 application (regardless of how the method was defined in the schema).
82
83 However, parameters coming from clients other than the Pegasus client
84 API may omit the PARAMTYPE attribute. In this case, the operation
85 processor (currently dispatcher) will find these "typeless" parameters
86 and convert them to the correct type based on the method definition.
87 kumpf 1.68 The result is that if the client specifies the parameter type in the
88 XML encoding (as the Pegasus client API does), the method provider
89 will receive the type specified by the client; if the client does not
90 specify the parameter type, the method provider will see the type
91 specified in the method definition.
92
93 CLIENT IMPLICATIONS:
94
95 Clients ARE affected by this change. Any output parameters that are
96 returned from Pegasus (or other CIM servers using the PARAMTYPE
97 attribute) will now be received by Pegasus clients as the same type
98 sent by the server. Previously, they would have always been of
99 String type. In addition, the return value will be received as the
100 correct type rather than as a String.
101
102 Parameters coming from servers other than Pegasus may omit the
103 PARAMTYPE attribute. In this case, the client will see a
104 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
105 String. Similarly, return values coming from other servers that omit
106 PARAMTYPE will be seen by the client as String type. These return
107 values will NOT have the CIMType::NONE hint that parameters get,
108 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
109
110 This behavior will remain for the forseeable future (through
111 Pegasus version 2), as it is not possible to require that other
112 implementations use the PARAMTYPE attribute.
113
114 SIDE EFFECTS:
115
116 In the process of implementing this functionality, I discovered
117 that there was no way to set a CIMValue to be an array of
118 CIMReferences. This appeared to be an oversight, since method
119 parameters are permitted to be arrays of CIMReferences. I've
120 added the necessary functionality to the CIMValue class.
121
122 I also found that the CIMParamValue class needed significant
123 clean-up, which I completed.
124
125 SETPROPERTY CHANGES:
126
127 A similar problem in SetProperty operations was addressed by
128 "typing" the specified property value in the operation processor
129 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
130 relevant schema to get the property definition, and then converting
131 the specified value to that property's type.
132
133 The SetProperty operation encoding has not changed to accomodate
134 inclusion of type information that would obviate the need for this
135 extra processing. However, clients can avoid this overhead by using
136 ModifyInstance operations (with a property list) instead of SetProperty.
137
138 The GetProperty operation also has NOT been updated with type
139 information. Client applications using the Pegasus client API will
140 always receive String or reference values when calling GetProperty
141 against any server (Pegasus or not). Clients that require properties
142 to be returned as the correct type must use GetInstance (perhaps with
143 a property list) rather than GetProperty.
144
|
145 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
146 Instead of being composed of a CIMParameter and a CIMValue, this
147 class is now composed of a String (parameter name) and a CIMValue.
148 This change removes the redundancy of having the type, isArray,
149 and arraySize members in both the CIMParameter and the CIMValue.
150 The new CIMParamValue definition is more consistent with the XML
151 encoding of parameter values.
152
153 An isTyped member was also added to CIMParamValue to support the
154 behavior outlined in item 12 above. Clients should use the isTyped()
155 method to determine whether the output parameters returned from
156 InvokeMethod operations are of the correct type, or whether they
157 have defaulted to String type.
|
158 karl 1.70
159 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
160 Corrections to compiler for Null values input (parser and valuectory)
|
161 karl 1.72
|
162 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
163 username and password as parameters to connect() method, added a new
164 method diconnect() that closes the open connection with the server
165 and added code to handle HTTP Basic authentication challenges from
166 the server.
|
167 karl 1.72
168 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
169 all of the entires in the array. Bugzilla bug # 6.
170
|
171 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
172 to perform efficient lookup of instance provider, method provider, and
173 indication provider. Also, implemented provider registration instances
174 operations.
175
176 Modified registration provider to use latest provider registration schema.
|
177 karl 1.74
178 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
179 definition of CIMFlavors.
|
180 karl 1.76
|
181 kumpf 1.68
|
182 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
183 eliminate many of the redundant memory copies that resulted from the
184 nested method call structure. Now, instead of having a method at
185 each level that adds a begin tag, contents, and an end tag, there
186 are separate methods to add the begin and end tags. At the top
187 level, each of the begin tag methods are called, then the message
188 "body" is added, followed by calls to the end tag methods.
189
190 The message body is currently still copied twice, once into the XML
191 payload and then again when the HTTP header is added. (Since the
192 HTTP header contains a content length field, the header cannot be
193 constructed until the payload is complete.) It is possible to
194 remove these extra copies as well, but that would require additional
195 changes elsewhere in the code. For example, the HTTPMessage class
196 would need to hold the headers and payload separately rather than in
197 a single buffer.
198
199 Along with these changes, I did a lot of cleanup. Much of the XML
200 formatting code has been moved from CIMReference to XmlWriter. Also,
201 error message formatting has been consolidated in XmlWriter from the
202 various encoders and decoders, etc.
203 kumpf 1.75
204 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
205 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
206 that the information in the HTTP headers of a request is consistent
207 with what is encoded in the XML request itself.
208
209 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
210 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
211 validated.
|
212 karl 1.76
213 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
214 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
215 Compiler qualifier generation. Add tests for resolve processing.
|
216 karl 1.78
|
217 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
218 Previously, the client application constructed a client API using:
219
220 Monitor* monitor = new Monitor;
221 HTTPConnector* connector;
222 connector = new HTTPConnector(monitor);
223 Uint32 timeoutMillis = 60 * 1000; // optional
224
225 CIMClient client(monitor, connector, timeoutMillis);
226
227 With this change, the client application now looks like:
228
229 Uint32 timeoutMillis = 60 * 1000; // optional
230
231 CIMClient client(timeoutMillis);
232
233 The old style allowed an SSL context to be specified in the HTTPConnector
234 constructor. It seems that the SSL context is really a property of a
235 connection rather than of the client API. So instead of adding an SSL
236 context parameter to the CIMClient constructor, I added it to the CIMClient
237 connect() method. There are now forms of the connect() method with and
238 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
239 class to allow specification of an SSL context in the connect() method
240 rather than in the constructor.
241
242 NOTE: Client applications are affected and must be updated with this
243 change. I've already updated all the clients that are checked in and
244 included in the Pegasus build.
|
245 kumpf 1.79
|
246 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
247 of fixed length arrays to be lost.
|
248 kumpf 1.75
|
249 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
250 include the source filename and line number in the exception message.
251 However, for anyone who wishes to include such information in the
252 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
253 for that purpose.
254
255 A couple of changes have been made to the Tracer class:
256
257 - CIMException messages can now be put in a trace file using the Tracer.
258 A new interface has been added to the Tracer to accept a CIMException
259 as input and writes the exception message in the CIMException to the
260 trace file. This message will include the source filename and the
261 line number of the CIMException originator.
262
263 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
264
265 - Strings can now be traced using the Tracer class:
266 A new interface has been added to the Tracer to accept a String as
267 input and writes the String to the trace file.
268
269 (ex.)
270 kumpf 1.79 You can issue the following method call:
271 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
272
273 or use the following new macro:
274 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
275
|
276 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
277 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
278 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
279 the case where std::ios::binary is present with a bitwise OR operator.
280 This macro only works when the std::ios::binary is NOT the first
281 operator to be "OR"ed.
|
282 ramnath 1.81
283 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
284 Pegasus could build and run on Tru64 unix. Finished replacing instances
285 of ios::binary with the macros PEGASUS_IOS_BINARY and
286 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
287 streams. Tru64 does not support the use of the " != " operator on a
288 fstream object. Instances of such were either modified or an ifdef
289 block detecting a build on Tru64 was used. Added cstdarg and ctime in
290 pegasus/src/stdcxx/cwrappers/ directory.
|
291 ramnath 1.80
|
292 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
293 again be installed as a Windows service. The repositoryRootPath could
294 not be found, because the pegasusHome variable was not being set properly
295 in the Windows service work thread.
296
|
297 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
298 local repository (cimmofl) and a client interface repository (cimmof)
299 executable
300
301 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
302 executable.
|
303 kumpf 1.84
304 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
305 Sint* values in XmlReader.cpp. Previously, values that were out of
306 range were simply truncated to fit the given integer size. An
307 exception is now thrown when the given string can not be parsed into
308 an integer of the specified size.
309
|
310 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
311 in XmlReader.cpp.
312
|
313 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
314 Authentication handling code and cleaned up ATTN's in the authentication
315 releated files. Implemented a new AuthenticationInfoRep class and modified
316 the related files. Added more test cases to test the authentication classes.
317
|
318 karl 1.88 33. (Ramnath Ravindran - Compaq) 21 March 2002 - replaced instances of "| ios::binary"
319 with PEGASUS_OR_IOS_BINARY in 3 files: System.cpp, InstanceIndexFile.cpp, and
|
320 ramnath 1.87 InstanceDataFile.cpp
|
321 karl 1.88
322 34. (KS) 25 March 2002 - Extended qualifier resolution to correctly handle Flavors nad
323 enabled the scope and flavors testing. Had been pretty much blocked before.
324
|
325 kumpf 1.89 35. (Roger Kumpf - HP) 26 Mar 2002 - Created a class to map CIM operation
326 request messages to provider API calls. Cleaned up the dispatcher and
327 added the ability to pass requests to control providers through the
328 ModuleController. Integrated the ConfigSettingProvider with the
329 ModuleController and set up the structure for getting the control
330 providers working. Moved the ConfigSettingProvider from the
331 Providers tree to the Pegasus tree, since it really is statically
332 linked into the server.
|
333 karl 1.88
|
334 kumpf 1.90 36. (Roger Kumpf - HP) 27 Mar 2002 - Integrated the UserAuthProvider with
335 the ModuleController as a control provider. Moved the UserAuthProvider
336 from the Providers tree to the Pegasus tree.
337
|
338 kumpf 1.91 37. (Roger Kumpf - HP) 27 Mar 2002 - Integrated the
339 ProviderRegistrationProvider with the ModuleController as a control
340 provider. Moved the ProviderRegistrationProvider to the Pegasus
341 ControlProviders directory. Obsoleted and removed the
342 Server/ConfigurationManager class and files.
|
343 karl 1.92
344 38. (KS) 27 march 2002 - Modifications to common functions and the compiler to
345 extend the processing of class creation and correct the flavors and their
346 use. This allows flavors to be inherited with rules for override, etc.
347
|
348 kumpf 1.91
|
349 karl 1.59 -------------------------------------------------------------------
|
350 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
351
352 1. Merged back to Main branch. All general development will be in main branch
353 in the future with releases in side branches. Special side developments
354 may temporarily be in side branches.
355 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
356 karl 1.53
357 2. (Karl) 18 December 2001 - Added new directory repositories where repository
358 implementations will be kept to separate them from the
359 repository interface defintion. Initial implementation is genericfile
360 which is the current file based repository.
361
362 Added new build variable RMREPOSITORY which is a generic MAKE command
363 to remove an existing repository. It simply substitutes for the RMDIRHIER
364 command at this point but we will make this a generic part of system
365 in the future.
|
366 karl 1.52
|
367 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
368 to check that all required parameters for intrinsic methods are
369 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
370 exception is thrown. Also added checks for duplicate parameters in the
371 intrinsic methods. If a parameter is specified more than once, a
372 CIM_ERR_INVALID_PARAMETER exception is thrown.
373
|
374 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
375 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
376 queue to this new queue. Modified CIMServer.cpp to create
377 CIMOperationRequestAuthorizer queue only when authorization is enabled.
378 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
379 it available to the CIMOperationRequestDispatcher.
380
|
381 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
382 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
383 forever. The problem was noticed when the TestClient program and CIMserver
384 service were both running. The service wasn't accessible to the TestClient
385 program.
386
|
387 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
388 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
389 in new queue, IndicationService which will get invoked from dispatcher.
390 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
391 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
392 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
393 CIM_GET_INSTANCE_REQUEST_MESSAGE
394 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
395 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
396
397 This new service will also take care of processing the indications on receiving
398 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
399 IndicationProvider or some other mechanism which is not yet clear.
400
401 IndicationService will also receive following messages from PG_ProviderRegistration
402 when a new IndicationProvider will get registered.
403 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
404 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
405
406 I had also defined new Indication Provider APIs, enableIndication, disableIndication
407 and modifyIndication with more parameters passed and eventually planning to terminate
408 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
409 plan to implement one more call as startIndication and will be done soon.
410
411 There are three new test programs in IndicationService directory, which will create
412 Filter, Indication and Subscription instances using IndicationService.
413
414 Also modified sample IndicationProvider code with the new APIs introduced.
|
415 mary 1.56
|
416 karl 1.52 -------------------------------------------------------------------------
|
417 karl 1.1
|
418 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
419 current working dev branch of build
|
420 mike 1.36
|
421 karl 1.49 ---------------------------------------------------------------------------
422 Version 1.1 - July 2001 Development branch (Work in PRogress)
423
|
424 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
425 PARAMETER.REFERENCE constructs for references).
426
427 2. (Mike Brasher) Reworked server communication into new module scheme.
|
428 mike 1.51 =======
429 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
430 seen as part of CGIclient class displays.
431
432 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
433 to the final version in Schemas\CIM25. This included minor
434 corrections, etc and a couple of file changes. This is the
435 official final CIM 25 schema relesed by the DMTF. This change
436 should not affect any current work.
437 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
438 directorys. Note however that today the make repository still
439 loads the 2.5 schema.
440
441 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
442 on XML output.
443
444 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
445 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
446 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
447 declarations in for loop initializers outside the loop, so multiple
448 "for (int i=0; i<10; i++);" statements cause a compile error.
449 mike 1.51
450 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
451 dependency on the config files at the start of the cimserver. Now the
452 cimserver will use in-memory default values in the absence of config files
453 and command line options. Fixed a few defects in the config framework that
454 were causing cimom to crash under certain conditions. Changed the config
455 provider class name to 'PG_ConfigSetting' in the mof file and modified
456 provider implementation files accordingly. Also modified the config CLI
457 to show user friendly error/status messages.
458
459 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
460 (reported incorrect line number on error in XML request if input redirected).
461 Enhanced the -d debug command line option to allow more flexibility in
462 generating debug output.
463
464 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
465 xml when it generates xml output.
466
467 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
468 a common file to reduce the number of files required by the default
469 repository implementation.
470 mike 1.51
471 10. (Mike Brasher) - Fixed minor bug in repository implementation.
472
473 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
474
475 12. (Mike Brasher) - Committed rework of server into queue approach.
476
477 13. (Mike Brasher) - New webserver and webclient examples.
478
479 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
480
481 15. (Mike Brasher) - Initial work on refactorying client into modules.
482 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
483
484 16. (Mike Brasher) - queue-based clients now complete.
485
486 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
487
488 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
489
490 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
491 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
492 a web server. See doc/Servlet for more information.
493
494 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
495 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
496 input and output can be written in a trace file.
497
498 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
499 Created new class SignalHandler that allow registration, activation and
500 deactivation of signal handler functions (Linux only !).
501
502 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
503 ExportClient to support ExportIndication. DisplayConsumer, a sample
504 consumer is added which will consume (by displaying on screen) the
505 indication exported by CIMExportRequestDispatcher. This complete
506 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
507 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
508 are modified to implement above messages.
509
510 XmlIndicationDispatcher test program is modified to test complete
511 operation. It now creates a consumer, handler and indication
512 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
513 indication to consumer. This program needs
514 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
515 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
516 in the repository to complete the test successfully. This test
517 program also needs Handler qualifier defined in repository and
518 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
519 below:
520
521 //====================================================================
522 // CIM_IndicationHandlerXMLHTTP
523 //====================================================================
524 [Description (
525 "CIM_IndicationHandlerXMLHTTP describes the destination for "
526 "Indications to be delivered via HTTP, using a cimXML "
527 "representation."), Handler ("CIMxmlIndicationHandler") ]
528
529 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
530 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
531 a provider library.
532
533 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
534 interface for the provider. InvokeMethod currently uses CIMValue as
535 type for inParameters and outParameters, which are unable to give
536 information about param name, type and value. This should be changed
537 to CIMParamValue which will help providers to know details of the
538 parameter name and type along with value passed through InvoleMethod
539 call. Current implementation uses CIMParamValue as parameters while
540 travelling through message queues and converts it back to array of
541 CIMValue before calling Provider API (which needs to be changed
542 later).
543
544 Also added are two test programs:
545
546 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
547 CIMParamValue class.
548
549 src/Pegasus/Client/tests/InvokeMethod - which makes call to
550 InvokeMethod and displays the return value. Current
551 implementation assumes that provider had returned true value
552 and outParameters (which are now hard coded in
553 CIMOperationRequestDispatcher to implement functionality)
554 mike 1.51 which are passed as response of InvokeMethod to client.
555
556 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
557 authentication to the pegasus code. Created an Authentication Manager
558 and authenticator interfaces. The file based local authentication
559 module has been modified to implement the local authenticator
560 interface, to generate the challenge for the unauthorized requests
561 and to verify the authentication.
562
563 A skeleton program has been created for the Basic Authenticator.
564 This code is in the Security/Authentication directory which is not
565 yet linked into the build.
566
567 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
568 Decoders. Earlier decoders were sending requests and responses
569 before finishing complete Xml parse. This was prone to send
570 request/response even the Xml is wrong after the MethodCall.
571 New changes collects the Message* as return value from the
572 appropriate functions while parsing the Xml and sends on
573 _outputQueue only when Xml is parsed successfully.
574
575 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
576 fix the problem with constructing provider name and loading the
577 providers for unix platforms. Also moved the shared library name
578 construction (appending .sl or .so) from
579 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
580 ProviderModule.cpp and included it in a method that returns
581 provider file path name.
582
583 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
584 Handler. This handler extracts MappingStrings qualifier from class
585 definition and converts it into SNMP specific trap data. The trap
586 structure is defined in a abstract class in snmpDeliverTrap.h file.
587 Every one has his or her own SNMP agent, which will talk with master
588 agent to deliver the trap or may have some other mechanism.
589 Extending snmpDeliverTrap class and deliverTrap method will help to
590 implement specific trap delivery mechanism.
591
592 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
593 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
594 property value to be default in the plan file, remove the property from the
595 plan file. Converted ConfigSettingProvider to use provider2 library.
596 mike 1.51
597 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
598 to allow tracing of a specific number of bytes in a given
599 string. Also modified the XmlIO trace code to use the new interface.
600 Changed the config file defaults for tracing.
601
602 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
603 NonStop platform (NSK) in directory pegasus/mak. The following files
604 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
605 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
606 program-unix.mak. The original program.mak which previously covered
607 all platforms was split into platform-specific make files, and now
608 only contains conditionals. Files config.mak, objects.mak, and
609 library.mak were changed to include the NSK files.
610 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
611
612 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
613 commas (,) in the string values of key properties.
614
615 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
616
617 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
618 pegasus/mak/program-windows.mak that prevented program builds for
619 the windows platform (related to change from 28 Oct). Replaced
620 leading whitespace in front of commands with tabs as required
621 in make files.
622
623 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
624 because getting an error in 26
625
626 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
627 whose types are references. These reference values must be
628 treated specially in the XML encoding, using the VALUE.REFERENCE
629 tag structure.
630
631 Pegasus had been passing reference values simply as String values.
632 For example, EnumerateInstanceNames returned KEYVALUEs of string
633 type rather than VALUE.REFERENCEs.
634
635 I've modified the XmlReader::getKeyBindingElement() and
636 CIMReference::instanceNameToXml() methods to read and write the
637 XML in the proper format. However, making that change required
638 mike 1.51 that a CIMReference object be able to distinguish between a key
639 of String type and a key of reference type.
640
641 I've modified the String format of CIMReferences slightly to
642 allow efficient processing of references whose keys are also of
643 reference type. The "official" form uses the same encoding for
644 key values of String type and of reference type, and so it
645 would be necessary to retrieve the class definition and look up
646 the types of the key properties to determine how to treat the
647 key values. This is clearly too inefficient for internal
648 transformations between CIMReferences and String values.
649
650 The workaround is to encode a 'R' at the beginning of the value
651 for a key of reference type (before the opening '"'). This allows
652 the parser to know a priori whether the key is of String or
653 reference type.
654
655 In this example:
656
657 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
658
659 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
660 the usual encoding. Key2 is a reference property, so the extra 'R'
661 is inserted before its encoded value. Note that this algorithm is
662 recursive, such that RefClass could include KeyC of reference type,
663 which would also get encoded with the 'R' notation.
664
665 The toString() method inserts the 'R' to provide symmetry. A new
666 KeyBinding type (REFERENCE) has been defined to denote keys in a
667 CIMReference that are of reference type. This KeyBinding type must
668 be used appropriately for CIMReference::ttoString() to behave
669 correctly.
670
671 The files that have been modified to make this change are
672 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
673
674 A result of this change is that instances names in the instance
675 repository will include this extra 'R' character. Thus, you will
676 need to repopulate your repository when you download the latest
677 CIMOM version.
678
679 Note that for user-facing uses of the String encoding of instance
680 mike 1.51 names (such as might appear in MOF for static association
681 instances or in the CGI client), this solution is non-standard and
682 therefore unacceptable. It is likely that these points will need
683 to process the more expensive operation of retrieving the class
684 definition to determine the key property types.
685
686 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
687 in case of error in setting trace components. Modified the property owner
688 init and update methods. Submitted the pegasus/mak/Buildmakefile with
689 cleanbuild, rebuild and trace configuration options.
690
691 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
692 (instanceName).
693
694 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
695 GetProperty/SetProperty/EnumerateInstances request/response messages.
696 Added encoding and decoding of PropertyList parameters on all
697 relevant intrinsic methods.
698
699 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
700 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
701 mike 1.51
702 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
703 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
704 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
705 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
706 SystemNsk.cpp) contain stubs. The associated control files
707 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
708 nsk platform links.
709
710 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
711 toString() method for CIMValues of String type. The old behavior
712 returned an XML encoding of the String with special characters
713 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
714 would be returned as a"b. The new behavior just returns the
715 String value directly with no translation. (Note that
716 CIMValue.toXml() may still be used to get the XML-encoded value.)
717
718 This change was necessary in part to correct the behavior of the
719 repository. CreateInstance stores the instance name returned by
720 CIMInstance.getInstanceName(), which is built using calls to
721 CIMValue.toString(). GetInstance searches for the instance name
722 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
723 be successful, CreateInstance must have stored the instance name
724 in that same form, without special character encoding.
725
726 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
727 the CIMValue class. Eliminated improper use of CIMValue.toString(),
728 often replacing with CIMValue.get(String&) or CIMValue.toXml().
729 Also added some error handling in the indication handlers.
730
731 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
732 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
733 to handle local instance path and local classpath. Modified the
734 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
735 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
736
737 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
738 to hold the argument to ModifyInstance and the return values
739 from EnumerateInstances. The client and provider APIs need to
740 be updated to use this class.
741
742 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
743 mike 1.51 source files. This CLI allows addition, modification, removal and listing
744 of CIM users. The CLI is not linked to the main makefile as the Provider
745 functionality is yet to be implemented. Added the function
746 String getPassword(char* prompt) to the System.h and cpp files.
747
748 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
749 the server to challenge the unauthorized requests, authenticate
750 the challenge responses, and verify the subsequent authorized requests.
751 Implemented authentication mechanism on the Client api to send
752 responses to the challenges from the server. Current implementation
753 supports only 'local' authentication mechanism.
754
755 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
756
757 - Changed the return value of EnumerateInstances from Array<CIMInstance>
758 to Array<CIMNamedInstance>
759 - Changed the parameter to ModifyInstance from CIMInstance to
760 CIMNamedInstance
761 - Added an optional PropertyList parameter to ModifyInstance
762 - Changed all handling of PropertyList parameters to use the
763 CIMPropertyList class instead of Array<String>
764 mike 1.51
765 Each of these changes was required to comply with the DMTF specification.
766
767 These changes were made throughout the system except for in the provider
768 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
769 differences from providers, so older providers will continue to function.
770 However, this means that clients can not yet take advantage of the added
771 functionality.
772
773 When the provider API is updated, the following changes will be visible:
774
775 - Providers will get a PropertyList parameter to ModifyInstance which
776 they are required to respect. Providers that can not process the
777 PropertyList must throw a NOT_SUPPORTED exception whenever the
778 list is not null. Clients can take advantage of this change by
779 issuing a ModifyInstance request against a selected set of
780 properties in an instance, rather than being required to replace
781 the entire instance.
782
783 - Providers will be required to return instance names along with
784 instances in the EnumerateInstances method. Clients will receive
785 mike 1.51 these instance names, as the standard dictates.
786
787 - Providers will receive a CIMPropertyList argument containing the
788 PropertyList instead of an Array<String>. This change allows
789 providers to distinguish between an empty list and a null list.
790
791 Note that the repository also does not yet handle the PropertyList in
792 ModifyInstance correctly.
793
794 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
795 provider API to match the changes made to the EnumerateInstances and
796 ModifyInstance operations. These changes were made to comply with
797 the DMTF specification.
798
799 The original Provider API has not been updated, and I have no
800 plans to do so. Providers written to the original API will
801 continue to function, but they will not have the opportunity
802 to take advantage of the features that have been added.
803
804 The significant changes to the Provider2 API are:
805
806 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
807 they are required to respect. Providers that can not process the
808 PropertyList must throw a NOT_SUPPORTED exception whenever the
809 list is not null. Clients can take advantage of this change by
810 issuing a ModifyInstance request against a selected set of
811 properties in an instance, rather than being required to replace
812 the entire instance.
813
814 - Providers will get an IncludeQualifiers parameter to ModifyInstance
815 which they are required to respect. If IncludeQualifiers is
816 false, the qualifiers on the modified instance provided must not
817 be used to update the instance.
818
819 - Providers will be required to return instance names along with
820 instances in the EnumerateInstances method. Clients will receive
821 these instance names, as the standard dictates.
822
823 The providers that are in the Pegasus build have all been updated.
824 However, whenever the PropertyList is not null, the providers throw
825 a NOT_SUPPORTED exception.
826
827 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
828 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
829 the Common module. File Config.h was modified to include the NSK
830 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
831 without the standard (std) namespace.
832
833 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
834 properties to support alternate behavior of the Pegasus repository:
835 repositoryIsDefaultInstanceProvider and repositoryProviderName.
836
837 Using the first one, the repository can be enabled/disabled as the
838 default provider for instance (and association) operations. The default
839 setting is "true", so the default behavior has not been changed. To
840 disable the repository as the default instance provider, issue the
841 following command before starting cimserver:
842
843 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
844
845 The repositoryProviderName configuration property specifies what
846 provider name is used to explicitly register the repository as a
847 provider. This is necessary when the repository needs to serve
848 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
849 to "false". The default value is "repository". To register the
850 repository as an instance provider for a class, add a
851 'Provider("repository")' qualifier to the class definition.
852
853 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
854 pass to providers that act as services. This handle provides
855 service providers with access to the CIMServer data structures.
856
857 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
858 the repository so that it respects the IncludeQualifiers and
859 PropertyList parameters. Updated SetProperty in the repository
860 so that it uses ModifyInstance correctly. The repository now
861 supports GetProperty and SetProperty in addition to ModifyInstance.
862
863 Implemented GetProperty and SetProperty in the Dispatcher and
864 Provider2 so that they get translated to GetInstance and
865 ModifyInstance calls (respectively) in the provider. Providers
866 written to the Provider2 API that correctly process the new
867 ModifyInstance parameters will automatically support SetProperty
868 operations. Note that GetProperty and SetProperty currently only
869 mike 1.51 work for String properties because of an XML encoding limitation.
870
871 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
872 Security components for authentication and authorization.
873
874 Authentication and User Management:
875 cimuser CLI : This CLI is used for addition, modification, removal
876 and listing of CIM Users. The CIM user password is encrypted and stored
877 in a file. The password file format is compatible with Apache's htpasswd
878 generated password file.
879
880 cimauth CLI implement the authorization managment functionality by letting
881 to add/remove/list user authorizations.
882
883 User Manager and User Manager Provider components implement the user
884 management and authorization functionality.
885
886 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
887 under src/Pegasus/WQL which contains library and BNF.
888
889 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
890 mike 1.51 which does provider registration, block, unblock, and stop a provider.
891 It also alert Subscription Service of any provider registration changes.
892
893 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
894 and String.cpp with PEG_min. The _min macro caused problems on the
895 NSK platform because of a duplicate definition in a standard file.
896
897 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
898 subscription service provider that serves as the instance provider for the
899 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
900 classes (from CIM_Events27.mof). The service also takes appropriate action
901 in response to startup, shutdown of the cimom, termination of a provider,
902 or change in provider registration.
903
904 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
905 and the command line interface for shutting down cimom gracefully.
906 For more information, refer to the CIMOM Shutdown working paper
907 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
908
909 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
910 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
911 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
912 constructor to set a pointer to the server-, resp. client wide SSL_Context
913 structure. The Socket field in HTTPConnection is substituted with an
914 MP_Socket pointer, a class that is designed to hide the differences
915 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
916 is defined even in a non-ssl environment.
917 How to use it in a Server or Client:
918 1. Just create an SSL_Context once per Server/Client address space
919 2. Construct every HTTPConnector/Acceptor with a pointer to this
920 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
921 without SSL_Context for conventional connections.
|
922 mike 1.50
|
923 mike 1.51 The Configuration data was extended with the boolean SSL property, and
924 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
925
926 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
927 kumpf 1.61
|
928 mike 1.51 ---------------------------------------------------------------------------
929 Version 1.1 - July 2001 Development branch
930 Tagged as version_1_01 on 3 August 2001 (sorry should have been
931 1.1
932
933 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
934 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
935 and ExportClient classes. the indication.
936
937 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
938 make the delivery of indications over Xml-HTTP and email respectively.
939
940 Provided examples for HandlerTable, XmlIndicationDelivery and
941 SendMailIndicationDelivery to support this implementation.
942
943 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
944 library and a thread-safe message queue (first stage). Classes defined
945 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
946 and SimpleThread.
947
948 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
949 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
950 information on using wbemexec. A simple test script is included. Please
951 see pegasus/src/Clients/wbemexec/tests/readme for information on running
952 the test script.
953
954 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
955 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
956 and
957 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
958 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
959 src/Pegasus/Common/TraceFileHandler.cpp.
960
961 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
962 Config CLI. Please refer to the documentation
963 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
964 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
965 using the config framework and cimconfig CLI. Make sure to load the config
966 mof (src/gmake config) before starting the cimserver. A simple test script
967 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
968 information on running the test script.
969
970 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
971 (changed the H and CPP files for the major CIM objects. These
972 functions generate CIM MOF output for the objects.
973
974 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
975 Authentication provides security mechanism to authenticates CIM clients
976 that
977 connect to CIM Server on the same system without having to specify a
978 password.
979 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
980 This component only works on unix and it's not linked in with the main
981 build.
982 When authentication framework is defined this component may need to be
983 modified to integrate with the framework.
|
984 karl 1.49
985 ---------------------------------------------------------------------------
986 Version 0.99.x (Fixes to version 0.99) in Process
|
987 mike 1.51
|
988 karl 1.49 NOTE: Please do not input anything to this branch except for critical
989 fixes. This is, in effect, 1.0 and we do not want to use it for
990 development.
991
992 ----------------------------------------------------------------------------
993
994 Version 0.98.0 - Work in progress (This number skipped)
|
995 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
996 mike 1.36
|
997 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
998 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
999
|
1000 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
1001 in the HTML URL reference for passing instance names.
1002
|
1003 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
1004
1005 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
1006
|
1007 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
1008 allow slp to compile.
1009
|
1010 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
1011
1012 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
1013 ids to queue pointers).
1014
|
1015 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
1016 and Dispatcher.
1017
|
1018 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
1019 and
1020 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
1021 chip 1.44 ResponseHandler for Provider2 interface.
|
1022 mike 1.45
1023 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
1024
1025 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
1026
|
1027 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
1028
|
1029 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
1030
1031 12. (Mike Brasher) - Fixed compiler error on Linux.
1032
|
1033 karl 1.38 ------------------------------------------------------------------------------
1034 --
|
1035 mike 1.26
|
1036 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
1037 karl 1.16
1038 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1039 for NT and Linux platforms.
|
1040 mike 1.26
|
1041 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1042 5988.
1043 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1044 the DMTF.
|
1045 mike 1.26
|
1046 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1047 Fusion event. THis included a) extended the test for end of HTTP header from
1048 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1049 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1050 mike 1.26
|
1051 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1052 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1053 revamping the compiler to work independently of the repository (grb).
|
1054 mike 1.26
|
1055 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1056 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1057 Now when you build normally, you will get the committed grammar and parser
1058 files instead of generating your own for a particular platform. This should
1059 prevent back-level lex and yacc implementations from generating troublesome
1060 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1061 bob 1.20 (grb)
|
1062 mike 1.26
|
1063 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1064 This change paves the way for upcoming changes that will allow the compiler
1065 to work indepently of the repository. (grb)
|
1066 mike 1.26
|
1067 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1068 mike 1.26
|
1069 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1070 modifyClass,
|
1071 chip 1.22 createClass to protect caller's object.
|
1072 mike 1.26
|
1073 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1074 directory. These
1075 interfaces allow very smart providers to perform advances operations.
1076 CIMProviderStub has
|
1077 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1078 mike 1.26
|
1079 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1080 mike 1.26
|
1081 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1082 repository you make world, make rebuild or make repository. ks
|
1083 mike 1.26
1084 12. Added associators() and associatorNames() operations to CIM repository.
|
1085 mike 1.27 (MEB)
1086
1087 13. More on association implementation (all four operations supported).
1088 Need to handle deletion of associations and protocol stubs still.
1089 Need to test class associations (rather than just instance associations).
1090 Need to handle deleteInstance().
1091 (MEB)
|
1092 mike 1.26
|
1093 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1094
|
1095 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1096 AssociationName
|
1097 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1098 pages.
1099
|
1100 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1101 sage 1.31
1102 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1103 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1104 Made cimserver accept the -D flag to eliminate the need for environment
1105 variables.
|
1106 mike 1.32
1107 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1108 References() and ReferenceNames() CIM operations. These only operate
1109 on instances at this time. They will operate on classes soon.
|
1110 kumpf 1.34
1111 19. (Mike Glantz) Extended and modified dynamic support
1112 changes to (1) work on HP-UX and (2) have all images and libraries
1113 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1114 change is to program.mak and library-unix.mak, removing specific
1115 lists of dynamic library specs and putting them in the Makefile
1116 and libraries.mak files that build the actual targets (lots of
1117 these now have DYNAMIC_LIBRARIES defined).
|
1118 karl 1.35
1119 20. (Karl) added basic Queue function to common (based on array) and added
1120 tests for stack and queue.
|
1121 karl 1.38
1122 ------------------------------------------------------------------------------
1123 --
|
1124 mike 1.36
|
1125 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1126 karl 1.11
|
1127 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1128 CIMServer (both)
|
1129 karl 1.11 Functions added include:
1130 a. Enable trace to log file.
|
1131 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1132 is
|
1133 karl 1.11 trace to log, -t is trace to console).
1134 c. add parameter in optionsrow for help message and enable the capture
|
1135 karl 1.12 of these messages in Options class. Also added help print that
1136 prints these things out. However, format not to beautiful.
|
1137 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1138 e. Extend the Clients\testclient so he does tests on Namespace.
|
1139 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1140 mike 1.33
|
1141 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1142 mike 1.33
|
1143 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1144 logs
|
1145 karl 1.12 are put
|
1146 mike 1.33
|
1147 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1148 This is a preliminary version.
|
1149 mike 1.33
|
1150 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1151 karl 1.13 throws CannotBind exception.
|
1152 mike 1.33
|
1153 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1154 not
|
1155 karl 1.14 print out all of the message. At the least it prints out the error message
1156 and components of the message causing the problem.
|
1157 mike 1.33
|
1158 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1159 mike 1.33
|
1160 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1161 karl 1.14 existed.
|
1162 mike 1.33
1163 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1164 karl 1.15
|
1165 karl 1.29 ------------------------------------------------------------------------------
1166 --
|
1167 karl 1.6 Version 0.97.2
1168
1169 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1170 2. Extend Formatter for Boolean and Uint32 types.
1171 3. Change CIM Server to use Trace (-t) flag. This also changed
1172 Handler.h to work off of flag.
1173 4. Minor corrections to __Namespace Provider.
1174 5. Extend tests for Formatter, String, and other modules.
1175 6. Correct errors in documentation.
1176 7. New working papers (provider interface).
|
1177 karl 1.8 8. Add Providerreg.exe tool.
1178 9. Add trace output for messages sent from the Server.
|
1179 mike 1.26
|
1180 karl 1.29 ------------------------------------------------------------------------------
1181 --
|
1182 mike 1.26
|
1183 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1184 karl 1.5
|
1185 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1186 find functions. Note: This symbol is defined in config.h. (ks).
1187
|
1188 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1189 of dynamic lib loaading.
|
1190 karl 1.1
1191
|
1192 karl 1.29 ------------------------------------------------------------------------------
1193 --
|
1194 mike 1.26
|
1195 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1196 karl 1.1
1197 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1198 qualifiers, methods.
1199 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1200 methods.
1201 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1202 qualifiers and to
1203 remove qualifiers.
1204 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1205 compiler. It probably imposed more limitations than would be required with
|
1206 karl 1.2 the current compiler. This version of the port produces an excessively large
1207 common module due to template bloat. That problem will be fixed in a future
1208 change to the port. Also there are a log of duplicate symbol warnings generate
1209 by the AIC compiler but these cause no problems. The port has been tested
1210 with the complete unit test and client/server test successfully.
|
1211 karl 1.1
1212 --------------------------------------------------------------------------
|
1213 karl 1.2
|
1214 mike 1.4 23 May 2001
|
1215 karl 1.1
|
1216 mike 1.9 1. Ported to HPUX
|
1217 karl 1.5
|
1218 mike 1.9 --------------------------------------------------------------------------
1219
1220 29 May 2001
1221
1222 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1223 mike 1.51
1224
1225
1226
|
1227 karl 1.48
|
1228 karl 1.38
|
1229 karl 1.30
|
1230 karl 1.29
|
1231 mike 1.10
|