1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
303 in XmlReader.cpp.
304
|
305 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
306 Authentication handling code and cleaned up ATTN's in the authentication
307 releated files. Implemented a new AuthenticationInfoRep class and modified
308 the related files. Added more test cases to test the authentication classes.
309
|
310 karl 1.88 33. (Ramnath Ravindran - Compaq) 21 March 2002 - replaced instances of "| ios::binary"
311 with PEGASUS_OR_IOS_BINARY in 3 files: System.cpp, InstanceIndexFile.cpp, and
|
312 ramnath 1.87 InstanceDataFile.cpp
|
313 karl 1.88
314 34. (KS) 25 March 2002 - Extended qualifier resolution to correctly handle Flavors nad
315 enabled the scope and flavors testing. Had been pretty much blocked before.
316
|
317 kumpf 1.89 35. (Roger Kumpf - HP) 26 Mar 2002 - Created a class to map CIM operation
318 request messages to provider API calls. Cleaned up the dispatcher and
319 added the ability to pass requests to control providers through the
320 ModuleController. Integrated the ConfigSettingProvider with the
321 ModuleController and set up the structure for getting the control
322 providers working. Moved the ConfigSettingProvider from the
323 Providers tree to the Pegasus tree, since it really is statically
324 linked into the server.
|
325 karl 1.88
|
326 karl 1.59 -------------------------------------------------------------------
|
327 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
328
329 1. Merged back to Main branch. All general development will be in main branch
330 in the future with releases in side branches. Special side developments
331 may temporarily be in side branches.
332 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
333 karl 1.53
334 2. (Karl) 18 December 2001 - Added new directory repositories where repository
335 implementations will be kept to separate them from the
336 repository interface defintion. Initial implementation is genericfile
337 which is the current file based repository.
338
339 Added new build variable RMREPOSITORY which is a generic MAKE command
340 to remove an existing repository. It simply substitutes for the RMDIRHIER
341 command at this point but we will make this a generic part of system
342 in the future.
|
343 karl 1.52
|
344 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
345 to check that all required parameters for intrinsic methods are
346 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
347 exception is thrown. Also added checks for duplicate parameters in the
348 intrinsic methods. If a parameter is specified more than once, a
349 CIM_ERR_INVALID_PARAMETER exception is thrown.
350
|
351 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
352 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
353 queue to this new queue. Modified CIMServer.cpp to create
354 CIMOperationRequestAuthorizer queue only when authorization is enabled.
355 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
356 it available to the CIMOperationRequestDispatcher.
357
|
358 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
359 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
360 forever. The problem was noticed when the TestClient program and CIMserver
361 service were both running. The service wasn't accessible to the TestClient
362 program.
363
|
364 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
365 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
366 in new queue, IndicationService which will get invoked from dispatcher.
367 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
368 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
369 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
370 CIM_GET_INSTANCE_REQUEST_MESSAGE
371 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
372 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
373
374 This new service will also take care of processing the indications on receiving
375 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
376 IndicationProvider or some other mechanism which is not yet clear.
377
378 IndicationService will also receive following messages from PG_ProviderRegistration
379 when a new IndicationProvider will get registered.
380 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
381 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
382
383 I had also defined new Indication Provider APIs, enableIndication, disableIndication
384 and modifyIndication with more parameters passed and eventually planning to terminate
385 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
386 plan to implement one more call as startIndication and will be done soon.
387
388 There are three new test programs in IndicationService directory, which will create
389 Filter, Indication and Subscription instances using IndicationService.
390
391 Also modified sample IndicationProvider code with the new APIs introduced.
|
392 mary 1.56
|
393 karl 1.52 -------------------------------------------------------------------------
|
394 karl 1.1
|
395 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
396 current working dev branch of build
|
397 mike 1.36
|
398 karl 1.49 ---------------------------------------------------------------------------
399 Version 1.1 - July 2001 Development branch (Work in PRogress)
400
|
401 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
402 PARAMETER.REFERENCE constructs for references).
403
404 2. (Mike Brasher) Reworked server communication into new module scheme.
|
405 mike 1.51 =======
406 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
407 seen as part of CGIclient class displays.
408
409 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
410 to the final version in Schemas\CIM25. This included minor
411 corrections, etc and a couple of file changes. This is the
412 official final CIM 25 schema relesed by the DMTF. This change
413 should not affect any current work.
414 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
415 directorys. Note however that today the make repository still
416 loads the 2.5 schema.
417
418 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
419 on XML output.
420
421 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
422 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
423 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
424 declarations in for loop initializers outside the loop, so multiple
425 "for (int i=0; i<10; i++);" statements cause a compile error.
426 mike 1.51
427 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
428 dependency on the config files at the start of the cimserver. Now the
429 cimserver will use in-memory default values in the absence of config files
430 and command line options. Fixed a few defects in the config framework that
431 were causing cimom to crash under certain conditions. Changed the config
432 provider class name to 'PG_ConfigSetting' in the mof file and modified
433 provider implementation files accordingly. Also modified the config CLI
434 to show user friendly error/status messages.
435
436 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
437 (reported incorrect line number on error in XML request if input redirected).
438 Enhanced the -d debug command line option to allow more flexibility in
439 generating debug output.
440
441 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
442 xml when it generates xml output.
443
444 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
445 a common file to reduce the number of files required by the default
446 repository implementation.
447 mike 1.51
448 10. (Mike Brasher) - Fixed minor bug in repository implementation.
449
450 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
451
452 12. (Mike Brasher) - Committed rework of server into queue approach.
453
454 13. (Mike Brasher) - New webserver and webclient examples.
455
456 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
457
458 15. (Mike Brasher) - Initial work on refactorying client into modules.
459 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
460
461 16. (Mike Brasher) - queue-based clients now complete.
462
463 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
464
465 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
466
467 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
468 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
469 a web server. See doc/Servlet for more information.
470
471 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
472 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
473 input and output can be written in a trace file.
474
475 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
476 Created new class SignalHandler that allow registration, activation and
477 deactivation of signal handler functions (Linux only !).
478
479 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
480 ExportClient to support ExportIndication. DisplayConsumer, a sample
481 consumer is added which will consume (by displaying on screen) the
482 indication exported by CIMExportRequestDispatcher. This complete
483 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
484 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
485 are modified to implement above messages.
486
487 XmlIndicationDispatcher test program is modified to test complete
488 operation. It now creates a consumer, handler and indication
489 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
490 indication to consumer. This program needs
491 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
492 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
493 in the repository to complete the test successfully. This test
494 program also needs Handler qualifier defined in repository and
495 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
496 below:
497
498 //====================================================================
499 // CIM_IndicationHandlerXMLHTTP
500 //====================================================================
501 [Description (
502 "CIM_IndicationHandlerXMLHTTP describes the destination for "
503 "Indications to be delivered via HTTP, using a cimXML "
504 "representation."), Handler ("CIMxmlIndicationHandler") ]
505
506 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
507 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
508 a provider library.
509
510 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
511 interface for the provider. InvokeMethod currently uses CIMValue as
512 type for inParameters and outParameters, which are unable to give
513 information about param name, type and value. This should be changed
514 to CIMParamValue which will help providers to know details of the
515 parameter name and type along with value passed through InvoleMethod
516 call. Current implementation uses CIMParamValue as parameters while
517 travelling through message queues and converts it back to array of
518 CIMValue before calling Provider API (which needs to be changed
519 later).
520
521 Also added are two test programs:
522
523 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
524 CIMParamValue class.
525
526 src/Pegasus/Client/tests/InvokeMethod - which makes call to
527 InvokeMethod and displays the return value. Current
528 implementation assumes that provider had returned true value
529 and outParameters (which are now hard coded in
530 CIMOperationRequestDispatcher to implement functionality)
531 mike 1.51 which are passed as response of InvokeMethod to client.
532
533 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
534 authentication to the pegasus code. Created an Authentication Manager
535 and authenticator interfaces. The file based local authentication
536 module has been modified to implement the local authenticator
537 interface, to generate the challenge for the unauthorized requests
538 and to verify the authentication.
539
540 A skeleton program has been created for the Basic Authenticator.
541 This code is in the Security/Authentication directory which is not
542 yet linked into the build.
543
544 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
545 Decoders. Earlier decoders were sending requests and responses
546 before finishing complete Xml parse. This was prone to send
547 request/response even the Xml is wrong after the MethodCall.
548 New changes collects the Message* as return value from the
549 appropriate functions while parsing the Xml and sends on
550 _outputQueue only when Xml is parsed successfully.
551
552 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
553 fix the problem with constructing provider name and loading the
554 providers for unix platforms. Also moved the shared library name
555 construction (appending .sl or .so) from
556 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
557 ProviderModule.cpp and included it in a method that returns
558 provider file path name.
559
560 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
561 Handler. This handler extracts MappingStrings qualifier from class
562 definition and converts it into SNMP specific trap data. The trap
563 structure is defined in a abstract class in snmpDeliverTrap.h file.
564 Every one has his or her own SNMP agent, which will talk with master
565 agent to deliver the trap or may have some other mechanism.
566 Extending snmpDeliverTrap class and deliverTrap method will help to
567 implement specific trap delivery mechanism.
568
569 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
570 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
571 property value to be default in the plan file, remove the property from the
572 plan file. Converted ConfigSettingProvider to use provider2 library.
573 mike 1.51
574 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
575 to allow tracing of a specific number of bytes in a given
576 string. Also modified the XmlIO trace code to use the new interface.
577 Changed the config file defaults for tracing.
578
579 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
580 NonStop platform (NSK) in directory pegasus/mak. The following files
581 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
582 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
583 program-unix.mak. The original program.mak which previously covered
584 all platforms was split into platform-specific make files, and now
585 only contains conditionals. Files config.mak, objects.mak, and
586 library.mak were changed to include the NSK files.
587 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
588
589 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
590 commas (,) in the string values of key properties.
591
592 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
593
594 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
595 pegasus/mak/program-windows.mak that prevented program builds for
596 the windows platform (related to change from 28 Oct). Replaced
597 leading whitespace in front of commands with tabs as required
598 in make files.
599
600 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
601 because getting an error in 26
602
603 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
604 whose types are references. These reference values must be
605 treated specially in the XML encoding, using the VALUE.REFERENCE
606 tag structure.
607
608 Pegasus had been passing reference values simply as String values.
609 For example, EnumerateInstanceNames returned KEYVALUEs of string
610 type rather than VALUE.REFERENCEs.
611
612 I've modified the XmlReader::getKeyBindingElement() and
613 CIMReference::instanceNameToXml() methods to read and write the
614 XML in the proper format. However, making that change required
615 mike 1.51 that a CIMReference object be able to distinguish between a key
616 of String type and a key of reference type.
617
618 I've modified the String format of CIMReferences slightly to
619 allow efficient processing of references whose keys are also of
620 reference type. The "official" form uses the same encoding for
621 key values of String type and of reference type, and so it
622 would be necessary to retrieve the class definition and look up
623 the types of the key properties to determine how to treat the
624 key values. This is clearly too inefficient for internal
625 transformations between CIMReferences and String values.
626
627 The workaround is to encode a 'R' at the beginning of the value
628 for a key of reference type (before the opening '"'). This allows
629 the parser to know a priori whether the key is of String or
630 reference type.
631
632 In this example:
633
634 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
635
636 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
637 the usual encoding. Key2 is a reference property, so the extra 'R'
638 is inserted before its encoded value. Note that this algorithm is
639 recursive, such that RefClass could include KeyC of reference type,
640 which would also get encoded with the 'R' notation.
641
642 The toString() method inserts the 'R' to provide symmetry. A new
643 KeyBinding type (REFERENCE) has been defined to denote keys in a
644 CIMReference that are of reference type. This KeyBinding type must
645 be used appropriately for CIMReference::ttoString() to behave
646 correctly.
647
648 The files that have been modified to make this change are
649 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
650
651 A result of this change is that instances names in the instance
652 repository will include this extra 'R' character. Thus, you will
653 need to repopulate your repository when you download the latest
654 CIMOM version.
655
656 Note that for user-facing uses of the String encoding of instance
657 mike 1.51 names (such as might appear in MOF for static association
658 instances or in the CGI client), this solution is non-standard and
659 therefore unacceptable. It is likely that these points will need
660 to process the more expensive operation of retrieving the class
661 definition to determine the key property types.
662
663 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
664 in case of error in setting trace components. Modified the property owner
665 init and update methods. Submitted the pegasus/mak/Buildmakefile with
666 cleanbuild, rebuild and trace configuration options.
667
668 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
669 (instanceName).
670
671 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
672 GetProperty/SetProperty/EnumerateInstances request/response messages.
673 Added encoding and decoding of PropertyList parameters on all
674 relevant intrinsic methods.
675
676 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
677 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
678 mike 1.51
679 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
680 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
681 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
682 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
683 SystemNsk.cpp) contain stubs. The associated control files
684 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
685 nsk platform links.
686
687 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
688 toString() method for CIMValues of String type. The old behavior
689 returned an XML encoding of the String with special characters
690 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
691 would be returned as a"b. The new behavior just returns the
692 String value directly with no translation. (Note that
693 CIMValue.toXml() may still be used to get the XML-encoded value.)
694
695 This change was necessary in part to correct the behavior of the
696 repository. CreateInstance stores the instance name returned by
697 CIMInstance.getInstanceName(), which is built using calls to
698 CIMValue.toString(). GetInstance searches for the instance name
699 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
700 be successful, CreateInstance must have stored the instance name
701 in that same form, without special character encoding.
702
703 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
704 the CIMValue class. Eliminated improper use of CIMValue.toString(),
705 often replacing with CIMValue.get(String&) or CIMValue.toXml().
706 Also added some error handling in the indication handlers.
707
708 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
709 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
710 to handle local instance path and local classpath. Modified the
711 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
712 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
713
714 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
715 to hold the argument to ModifyInstance and the return values
716 from EnumerateInstances. The client and provider APIs need to
717 be updated to use this class.
718
719 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
720 mike 1.51 source files. This CLI allows addition, modification, removal and listing
721 of CIM users. The CLI is not linked to the main makefile as the Provider
722 functionality is yet to be implemented. Added the function
723 String getPassword(char* prompt) to the System.h and cpp files.
724
725 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
726 the server to challenge the unauthorized requests, authenticate
727 the challenge responses, and verify the subsequent authorized requests.
728 Implemented authentication mechanism on the Client api to send
729 responses to the challenges from the server. Current implementation
730 supports only 'local' authentication mechanism.
731
732 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
733
734 - Changed the return value of EnumerateInstances from Array<CIMInstance>
735 to Array<CIMNamedInstance>
736 - Changed the parameter to ModifyInstance from CIMInstance to
737 CIMNamedInstance
738 - Added an optional PropertyList parameter to ModifyInstance
739 - Changed all handling of PropertyList parameters to use the
740 CIMPropertyList class instead of Array<String>
741 mike 1.51
742 Each of these changes was required to comply with the DMTF specification.
743
744 These changes were made throughout the system except for in the provider
745 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
746 differences from providers, so older providers will continue to function.
747 However, this means that clients can not yet take advantage of the added
748 functionality.
749
750 When the provider API is updated, the following changes will be visible:
751
752 - Providers will get a PropertyList parameter to ModifyInstance which
753 they are required to respect. Providers that can not process the
754 PropertyList must throw a NOT_SUPPORTED exception whenever the
755 list is not null. Clients can take advantage of this change by
756 issuing a ModifyInstance request against a selected set of
757 properties in an instance, rather than being required to replace
758 the entire instance.
759
760 - Providers will be required to return instance names along with
761 instances in the EnumerateInstances method. Clients will receive
762 mike 1.51 these instance names, as the standard dictates.
763
764 - Providers will receive a CIMPropertyList argument containing the
765 PropertyList instead of an Array<String>. This change allows
766 providers to distinguish between an empty list and a null list.
767
768 Note that the repository also does not yet handle the PropertyList in
769 ModifyInstance correctly.
770
771 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
772 provider API to match the changes made to the EnumerateInstances and
773 ModifyInstance operations. These changes were made to comply with
774 the DMTF specification.
775
776 The original Provider API has not been updated, and I have no
777 plans to do so. Providers written to the original API will
778 continue to function, but they will not have the opportunity
779 to take advantage of the features that have been added.
780
781 The significant changes to the Provider2 API are:
782
783 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
784 they are required to respect. Providers that can not process the
785 PropertyList must throw a NOT_SUPPORTED exception whenever the
786 list is not null. Clients can take advantage of this change by
787 issuing a ModifyInstance request against a selected set of
788 properties in an instance, rather than being required to replace
789 the entire instance.
790
791 - Providers will get an IncludeQualifiers parameter to ModifyInstance
792 which they are required to respect. If IncludeQualifiers is
793 false, the qualifiers on the modified instance provided must not
794 be used to update the instance.
795
796 - Providers will be required to return instance names along with
797 instances in the EnumerateInstances method. Clients will receive
798 these instance names, as the standard dictates.
799
800 The providers that are in the Pegasus build have all been updated.
801 However, whenever the PropertyList is not null, the providers throw
802 a NOT_SUPPORTED exception.
803
804 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
805 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
806 the Common module. File Config.h was modified to include the NSK
807 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
808 without the standard (std) namespace.
809
810 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
811 properties to support alternate behavior of the Pegasus repository:
812 repositoryIsDefaultInstanceProvider and repositoryProviderName.
813
814 Using the first one, the repository can be enabled/disabled as the
815 default provider for instance (and association) operations. The default
816 setting is "true", so the default behavior has not been changed. To
817 disable the repository as the default instance provider, issue the
818 following command before starting cimserver:
819
820 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
821
822 The repositoryProviderName configuration property specifies what
823 provider name is used to explicitly register the repository as a
824 provider. This is necessary when the repository needs to serve
825 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
826 to "false". The default value is "repository". To register the
827 repository as an instance provider for a class, add a
828 'Provider("repository")' qualifier to the class definition.
829
830 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
831 pass to providers that act as services. This handle provides
832 service providers with access to the CIMServer data structures.
833
834 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
835 the repository so that it respects the IncludeQualifiers and
836 PropertyList parameters. Updated SetProperty in the repository
837 so that it uses ModifyInstance correctly. The repository now
838 supports GetProperty and SetProperty in addition to ModifyInstance.
839
840 Implemented GetProperty and SetProperty in the Dispatcher and
841 Provider2 so that they get translated to GetInstance and
842 ModifyInstance calls (respectively) in the provider. Providers
843 written to the Provider2 API that correctly process the new
844 ModifyInstance parameters will automatically support SetProperty
845 operations. Note that GetProperty and SetProperty currently only
846 mike 1.51 work for String properties because of an XML encoding limitation.
847
848 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
849 Security components for authentication and authorization.
850
851 Authentication and User Management:
852 cimuser CLI : This CLI is used for addition, modification, removal
853 and listing of CIM Users. The CIM user password is encrypted and stored
854 in a file. The password file format is compatible with Apache's htpasswd
855 generated password file.
856
857 cimauth CLI implement the authorization managment functionality by letting
858 to add/remove/list user authorizations.
859
860 User Manager and User Manager Provider components implement the user
861 management and authorization functionality.
862
863 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
864 under src/Pegasus/WQL which contains library and BNF.
865
866 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
867 mike 1.51 which does provider registration, block, unblock, and stop a provider.
868 It also alert Subscription Service of any provider registration changes.
869
870 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
871 and String.cpp with PEG_min. The _min macro caused problems on the
872 NSK platform because of a duplicate definition in a standard file.
873
874 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
875 subscription service provider that serves as the instance provider for the
876 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
877 classes (from CIM_Events27.mof). The service also takes appropriate action
878 in response to startup, shutdown of the cimom, termination of a provider,
879 or change in provider registration.
880
881 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
882 and the command line interface for shutting down cimom gracefully.
883 For more information, refer to the CIMOM Shutdown working paper
884 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
885
886 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
887 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
888 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
889 constructor to set a pointer to the server-, resp. client wide SSL_Context
890 structure. The Socket field in HTTPConnection is substituted with an
891 MP_Socket pointer, a class that is designed to hide the differences
892 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
893 is defined even in a non-ssl environment.
894 How to use it in a Server or Client:
895 1. Just create an SSL_Context once per Server/Client address space
896 2. Construct every HTTPConnector/Acceptor with a pointer to this
897 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
898 without SSL_Context for conventional connections.
|
899 mike 1.50
|
900 mike 1.51 The Configuration data was extended with the boolean SSL property, and
901 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
902
903 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
904 kumpf 1.61
|
905 mike 1.51 ---------------------------------------------------------------------------
906 Version 1.1 - July 2001 Development branch
907 Tagged as version_1_01 on 3 August 2001 (sorry should have been
908 1.1
909
910 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
911 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
912 and ExportClient classes. the indication.
913
914 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
915 make the delivery of indications over Xml-HTTP and email respectively.
916
917 Provided examples for HandlerTable, XmlIndicationDelivery and
918 SendMailIndicationDelivery to support this implementation.
919
920 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
921 library and a thread-safe message queue (first stage). Classes defined
922 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
923 and SimpleThread.
924
925 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
926 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
927 information on using wbemexec. A simple test script is included. Please
928 see pegasus/src/Clients/wbemexec/tests/readme for information on running
929 the test script.
930
931 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
932 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
933 and
934 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
935 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
936 src/Pegasus/Common/TraceFileHandler.cpp.
937
938 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
939 Config CLI. Please refer to the documentation
940 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
941 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
942 using the config framework and cimconfig CLI. Make sure to load the config
943 mof (src/gmake config) before starting the cimserver. A simple test script
944 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
945 information on running the test script.
946
947 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
948 (changed the H and CPP files for the major CIM objects. These
949 functions generate CIM MOF output for the objects.
950
951 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
952 Authentication provides security mechanism to authenticates CIM clients
953 that
954 connect to CIM Server on the same system without having to specify a
955 password.
956 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
957 This component only works on unix and it's not linked in with the main
958 build.
959 When authentication framework is defined this component may need to be
960 modified to integrate with the framework.
|
961 karl 1.49
962 ---------------------------------------------------------------------------
963 Version 0.99.x (Fixes to version 0.99) in Process
|
964 mike 1.51
|
965 karl 1.49 NOTE: Please do not input anything to this branch except for critical
966 fixes. This is, in effect, 1.0 and we do not want to use it for
967 development.
968
969 ----------------------------------------------------------------------------
970
971 Version 0.98.0 - Work in progress (This number skipped)
|
972 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
973 mike 1.36
|
974 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
975 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
976
|
977 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
978 in the HTML URL reference for passing instance names.
979
|
980 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
981
982 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
983
|
984 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
985 allow slp to compile.
986
|
987 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
988
989 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
990 ids to queue pointers).
991
|
992 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
993 and Dispatcher.
994
|
995 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
996 and
997 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
998 chip 1.44 ResponseHandler for Provider2 interface.
|
999 mike 1.45
1000 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
1001
1002 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
1003
|
1004 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
1005
|
1006 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
1007
1008 12. (Mike Brasher) - Fixed compiler error on Linux.
1009
|
1010 karl 1.38 ------------------------------------------------------------------------------
1011 --
|
1012 mike 1.26
|
1013 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
1014 karl 1.16
1015 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1016 for NT and Linux platforms.
|
1017 mike 1.26
|
1018 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1019 5988.
1020 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1021 the DMTF.
|
1022 mike 1.26
|
1023 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1024 Fusion event. THis included a) extended the test for end of HTTP header from
1025 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1026 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1027 mike 1.26
|
1028 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1029 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1030 revamping the compiler to work independently of the repository (grb).
|
1031 mike 1.26
|
1032 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1033 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1034 Now when you build normally, you will get the committed grammar and parser
1035 files instead of generating your own for a particular platform. This should
1036 prevent back-level lex and yacc implementations from generating troublesome
1037 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1038 bob 1.20 (grb)
|
1039 mike 1.26
|
1040 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1041 This change paves the way for upcoming changes that will allow the compiler
1042 to work indepently of the repository. (grb)
|
1043 mike 1.26
|
1044 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1045 mike 1.26
|
1046 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1047 modifyClass,
|
1048 chip 1.22 createClass to protect caller's object.
|
1049 mike 1.26
|
1050 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1051 directory. These
1052 interfaces allow very smart providers to perform advances operations.
1053 CIMProviderStub has
|
1054 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1055 mike 1.26
|
1056 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1057 mike 1.26
|
1058 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1059 repository you make world, make rebuild or make repository. ks
|
1060 mike 1.26
1061 12. Added associators() and associatorNames() operations to CIM repository.
|
1062 mike 1.27 (MEB)
1063
1064 13. More on association implementation (all four operations supported).
1065 Need to handle deletion of associations and protocol stubs still.
1066 Need to test class associations (rather than just instance associations).
1067 Need to handle deleteInstance().
1068 (MEB)
|
1069 mike 1.26
|
1070 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1071
|
1072 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1073 AssociationName
|
1074 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1075 pages.
1076
|
1077 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1078 sage 1.31
1079 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1080 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1081 Made cimserver accept the -D flag to eliminate the need for environment
1082 variables.
|
1083 mike 1.32
1084 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1085 References() and ReferenceNames() CIM operations. These only operate
1086 on instances at this time. They will operate on classes soon.
|
1087 kumpf 1.34
1088 19. (Mike Glantz) Extended and modified dynamic support
1089 changes to (1) work on HP-UX and (2) have all images and libraries
1090 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1091 change is to program.mak and library-unix.mak, removing specific
1092 lists of dynamic library specs and putting them in the Makefile
1093 and libraries.mak files that build the actual targets (lots of
1094 these now have DYNAMIC_LIBRARIES defined).
|
1095 karl 1.35
1096 20. (Karl) added basic Queue function to common (based on array) and added
1097 tests for stack and queue.
|
1098 karl 1.38
1099 ------------------------------------------------------------------------------
1100 --
|
1101 mike 1.36
|
1102 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1103 karl 1.11
|
1104 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1105 CIMServer (both)
|
1106 karl 1.11 Functions added include:
1107 a. Enable trace to log file.
|
1108 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1109 is
|
1110 karl 1.11 trace to log, -t is trace to console).
1111 c. add parameter in optionsrow for help message and enable the capture
|
1112 karl 1.12 of these messages in Options class. Also added help print that
1113 prints these things out. However, format not to beautiful.
|
1114 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1115 e. Extend the Clients\testclient so he does tests on Namespace.
|
1116 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1117 mike 1.33
|
1118 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1119 mike 1.33
|
1120 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1121 logs
|
1122 karl 1.12 are put
|
1123 mike 1.33
|
1124 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1125 This is a preliminary version.
|
1126 mike 1.33
|
1127 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1128 karl 1.13 throws CannotBind exception.
|
1129 mike 1.33
|
1130 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1131 not
|
1132 karl 1.14 print out all of the message. At the least it prints out the error message
1133 and components of the message causing the problem.
|
1134 mike 1.33
|
1135 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1136 mike 1.33
|
1137 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1138 karl 1.14 existed.
|
1139 mike 1.33
1140 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1141 karl 1.15
|
1142 karl 1.29 ------------------------------------------------------------------------------
1143 --
|
1144 karl 1.6 Version 0.97.2
1145
1146 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1147 2. Extend Formatter for Boolean and Uint32 types.
1148 3. Change CIM Server to use Trace (-t) flag. This also changed
1149 Handler.h to work off of flag.
1150 4. Minor corrections to __Namespace Provider.
1151 5. Extend tests for Formatter, String, and other modules.
1152 6. Correct errors in documentation.
1153 7. New working papers (provider interface).
|
1154 karl 1.8 8. Add Providerreg.exe tool.
1155 9. Add trace output for messages sent from the Server.
|
1156 mike 1.26
|
1157 karl 1.29 ------------------------------------------------------------------------------
1158 --
|
1159 mike 1.26
|
1160 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1161 karl 1.5
|
1162 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1163 find functions. Note: This symbol is defined in config.h. (ks).
1164
|
1165 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1166 of dynamic lib loaading.
|
1167 karl 1.1
1168
|
1169 karl 1.29 ------------------------------------------------------------------------------
1170 --
|
1171 mike 1.26
|
1172 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1173 karl 1.1
1174 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1175 qualifiers, methods.
1176 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1177 methods.
1178 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1179 qualifiers and to
1180 remove qualifiers.
1181 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1182 compiler. It probably imposed more limitations than would be required with
|
1183 karl 1.2 the current compiler. This version of the port produces an excessively large
1184 common module due to template bloat. That problem will be fixed in a future
1185 change to the port. Also there are a log of duplicate symbol warnings generate
1186 by the AIC compiler but these cause no problems. The port has been tested
1187 with the complete unit test and client/server test successfully.
|
1188 karl 1.1
1189 --------------------------------------------------------------------------
|
1190 karl 1.2
|
1191 mike 1.4 23 May 2001
|
1192 karl 1.1
|
1193 mike 1.9 1. Ported to HPUX
|
1194 karl 1.5
|
1195 mike 1.9 --------------------------------------------------------------------------
1196
1197 29 May 2001
1198
1199 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1200 mike 1.51
1201
1202
1203
|
1204 karl 1.48
|
1205 karl 1.38
|
1206 karl 1.30
|
1207 karl 1.29
|
1208 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc