1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
303 in XmlReader.cpp.
304
|
305 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
306 Authentication handling code and cleaned up ATTN's in the authentication
307 releated files. Implemented a new AuthenticationInfoRep class and modified
308 the related files. Added more test cases to test the authentication classes.
309
|
310 karl 1.88 33. (Ramnath Ravindran - Compaq) 21 March 2002 - replaced instances of "| ios::binary"
311 with PEGASUS_OR_IOS_BINARY in 3 files: System.cpp, InstanceIndexFile.cpp, and
|
312 ramnath 1.87 InstanceDataFile.cpp
|
313 karl 1.88
314 34. (KS) 25 March 2002 - Extended qualifier resolution to correctly handle Flavors nad
315 enabled the scope and flavors testing. Had been pretty much blocked before.
316
317
|
318 karl 1.59 -------------------------------------------------------------------
|
319 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
320
321 1. Merged back to Main branch. All general development will be in main branch
322 in the future with releases in side branches. Special side developments
323 may temporarily be in side branches.
324 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
325 karl 1.53
326 2. (Karl) 18 December 2001 - Added new directory repositories where repository
327 implementations will be kept to separate them from the
328 repository interface defintion. Initial implementation is genericfile
329 which is the current file based repository.
330
331 Added new build variable RMREPOSITORY which is a generic MAKE command
332 to remove an existing repository. It simply substitutes for the RMDIRHIER
333 command at this point but we will make this a generic part of system
334 in the future.
|
335 karl 1.52
|
336 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
337 to check that all required parameters for intrinsic methods are
338 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
339 exception is thrown. Also added checks for duplicate parameters in the
340 intrinsic methods. If a parameter is specified more than once, a
341 CIM_ERR_INVALID_PARAMETER exception is thrown.
342
|
343 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
344 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
345 queue to this new queue. Modified CIMServer.cpp to create
346 CIMOperationRequestAuthorizer queue only when authorization is enabled.
347 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
348 it available to the CIMOperationRequestDispatcher.
349
|
350 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
351 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
352 forever. The problem was noticed when the TestClient program and CIMserver
353 service were both running. The service wasn't accessible to the TestClient
354 program.
355
|
356 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
357 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
358 in new queue, IndicationService which will get invoked from dispatcher.
359 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
360 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
361 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
362 CIM_GET_INSTANCE_REQUEST_MESSAGE
363 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
364 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
365
366 This new service will also take care of processing the indications on receiving
367 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
368 IndicationProvider or some other mechanism which is not yet clear.
369
370 IndicationService will also receive following messages from PG_ProviderRegistration
371 when a new IndicationProvider will get registered.
372 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
373 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
374
375 I had also defined new Indication Provider APIs, enableIndication, disableIndication
376 and modifyIndication with more parameters passed and eventually planning to terminate
377 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
378 plan to implement one more call as startIndication and will be done soon.
379
380 There are three new test programs in IndicationService directory, which will create
381 Filter, Indication and Subscription instances using IndicationService.
382
383 Also modified sample IndicationProvider code with the new APIs introduced.
|
384 mary 1.56
|
385 karl 1.52 -------------------------------------------------------------------------
|
386 karl 1.1
|
387 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
388 current working dev branch of build
|
389 mike 1.36
|
390 karl 1.49 ---------------------------------------------------------------------------
391 Version 1.1 - July 2001 Development branch (Work in PRogress)
392
|
393 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
394 PARAMETER.REFERENCE constructs for references).
395
396 2. (Mike Brasher) Reworked server communication into new module scheme.
|
397 mike 1.51 =======
398 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
399 seen as part of CGIclient class displays.
400
401 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
402 to the final version in Schemas\CIM25. This included minor
403 corrections, etc and a couple of file changes. This is the
404 official final CIM 25 schema relesed by the DMTF. This change
405 should not affect any current work.
406 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
407 directorys. Note however that today the make repository still
408 loads the 2.5 schema.
409
410 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
411 on XML output.
412
413 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
414 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
415 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
416 declarations in for loop initializers outside the loop, so multiple
417 "for (int i=0; i<10; i++);" statements cause a compile error.
418 mike 1.51
419 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
420 dependency on the config files at the start of the cimserver. Now the
421 cimserver will use in-memory default values in the absence of config files
422 and command line options. Fixed a few defects in the config framework that
423 were causing cimom to crash under certain conditions. Changed the config
424 provider class name to 'PG_ConfigSetting' in the mof file and modified
425 provider implementation files accordingly. Also modified the config CLI
426 to show user friendly error/status messages.
427
428 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
429 (reported incorrect line number on error in XML request if input redirected).
430 Enhanced the -d debug command line option to allow more flexibility in
431 generating debug output.
432
433 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
434 xml when it generates xml output.
435
436 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
437 a common file to reduce the number of files required by the default
438 repository implementation.
439 mike 1.51
440 10. (Mike Brasher) - Fixed minor bug in repository implementation.
441
442 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
443
444 12. (Mike Brasher) - Committed rework of server into queue approach.
445
446 13. (Mike Brasher) - New webserver and webclient examples.
447
448 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
449
450 15. (Mike Brasher) - Initial work on refactorying client into modules.
451 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
452
453 16. (Mike Brasher) - queue-based clients now complete.
454
455 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
456
457 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
458
459 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
460 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
461 a web server. See doc/Servlet for more information.
462
463 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
464 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
465 input and output can be written in a trace file.
466
467 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
468 Created new class SignalHandler that allow registration, activation and
469 deactivation of signal handler functions (Linux only !).
470
471 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
472 ExportClient to support ExportIndication. DisplayConsumer, a sample
473 consumer is added which will consume (by displaying on screen) the
474 indication exported by CIMExportRequestDispatcher. This complete
475 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
476 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
477 are modified to implement above messages.
478
479 XmlIndicationDispatcher test program is modified to test complete
480 operation. It now creates a consumer, handler and indication
481 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
482 indication to consumer. This program needs
483 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
484 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
485 in the repository to complete the test successfully. This test
486 program also needs Handler qualifier defined in repository and
487 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
488 below:
489
490 //====================================================================
491 // CIM_IndicationHandlerXMLHTTP
492 //====================================================================
493 [Description (
494 "CIM_IndicationHandlerXMLHTTP describes the destination for "
495 "Indications to be delivered via HTTP, using a cimXML "
496 "representation."), Handler ("CIMxmlIndicationHandler") ]
497
498 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
499 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
500 a provider library.
501
502 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
503 interface for the provider. InvokeMethod currently uses CIMValue as
504 type for inParameters and outParameters, which are unable to give
505 information about param name, type and value. This should be changed
506 to CIMParamValue which will help providers to know details of the
507 parameter name and type along with value passed through InvoleMethod
508 call. Current implementation uses CIMParamValue as parameters while
509 travelling through message queues and converts it back to array of
510 CIMValue before calling Provider API (which needs to be changed
511 later).
512
513 Also added are two test programs:
514
515 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
516 CIMParamValue class.
517
518 src/Pegasus/Client/tests/InvokeMethod - which makes call to
519 InvokeMethod and displays the return value. Current
520 implementation assumes that provider had returned true value
521 and outParameters (which are now hard coded in
522 CIMOperationRequestDispatcher to implement functionality)
523 mike 1.51 which are passed as response of InvokeMethod to client.
524
525 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
526 authentication to the pegasus code. Created an Authentication Manager
527 and authenticator interfaces. The file based local authentication
528 module has been modified to implement the local authenticator
529 interface, to generate the challenge for the unauthorized requests
530 and to verify the authentication.
531
532 A skeleton program has been created for the Basic Authenticator.
533 This code is in the Security/Authentication directory which is not
534 yet linked into the build.
535
536 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
537 Decoders. Earlier decoders were sending requests and responses
538 before finishing complete Xml parse. This was prone to send
539 request/response even the Xml is wrong after the MethodCall.
540 New changes collects the Message* as return value from the
541 appropriate functions while parsing the Xml and sends on
542 _outputQueue only when Xml is parsed successfully.
543
544 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
545 fix the problem with constructing provider name and loading the
546 providers for unix platforms. Also moved the shared library name
547 construction (appending .sl or .so) from
548 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
549 ProviderModule.cpp and included it in a method that returns
550 provider file path name.
551
552 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
553 Handler. This handler extracts MappingStrings qualifier from class
554 definition and converts it into SNMP specific trap data. The trap
555 structure is defined in a abstract class in snmpDeliverTrap.h file.
556 Every one has his or her own SNMP agent, which will talk with master
557 agent to deliver the trap or may have some other mechanism.
558 Extending snmpDeliverTrap class and deliverTrap method will help to
559 implement specific trap delivery mechanism.
560
561 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
562 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
563 property value to be default in the plan file, remove the property from the
564 plan file. Converted ConfigSettingProvider to use provider2 library.
565 mike 1.51
566 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
567 to allow tracing of a specific number of bytes in a given
568 string. Also modified the XmlIO trace code to use the new interface.
569 Changed the config file defaults for tracing.
570
571 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
572 NonStop platform (NSK) in directory pegasus/mak. The following files
573 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
574 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
575 program-unix.mak. The original program.mak which previously covered
576 all platforms was split into platform-specific make files, and now
577 only contains conditionals. Files config.mak, objects.mak, and
578 library.mak were changed to include the NSK files.
579 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
580
581 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
582 commas (,) in the string values of key properties.
583
584 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
585
586 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
587 pegasus/mak/program-windows.mak that prevented program builds for
588 the windows platform (related to change from 28 Oct). Replaced
589 leading whitespace in front of commands with tabs as required
590 in make files.
591
592 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
593 because getting an error in 26
594
595 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
596 whose types are references. These reference values must be
597 treated specially in the XML encoding, using the VALUE.REFERENCE
598 tag structure.
599
600 Pegasus had been passing reference values simply as String values.
601 For example, EnumerateInstanceNames returned KEYVALUEs of string
602 type rather than VALUE.REFERENCEs.
603
604 I've modified the XmlReader::getKeyBindingElement() and
605 CIMReference::instanceNameToXml() methods to read and write the
606 XML in the proper format. However, making that change required
607 mike 1.51 that a CIMReference object be able to distinguish between a key
608 of String type and a key of reference type.
609
610 I've modified the String format of CIMReferences slightly to
611 allow efficient processing of references whose keys are also of
612 reference type. The "official" form uses the same encoding for
613 key values of String type and of reference type, and so it
614 would be necessary to retrieve the class definition and look up
615 the types of the key properties to determine how to treat the
616 key values. This is clearly too inefficient for internal
617 transformations between CIMReferences and String values.
618
619 The workaround is to encode a 'R' at the beginning of the value
620 for a key of reference type (before the opening '"'). This allows
621 the parser to know a priori whether the key is of String or
622 reference type.
623
624 In this example:
625
626 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
627
628 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
629 the usual encoding. Key2 is a reference property, so the extra 'R'
630 is inserted before its encoded value. Note that this algorithm is
631 recursive, such that RefClass could include KeyC of reference type,
632 which would also get encoded with the 'R' notation.
633
634 The toString() method inserts the 'R' to provide symmetry. A new
635 KeyBinding type (REFERENCE) has been defined to denote keys in a
636 CIMReference that are of reference type. This KeyBinding type must
637 be used appropriately for CIMReference::ttoString() to behave
638 correctly.
639
640 The files that have been modified to make this change are
641 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
642
643 A result of this change is that instances names in the instance
644 repository will include this extra 'R' character. Thus, you will
645 need to repopulate your repository when you download the latest
646 CIMOM version.
647
648 Note that for user-facing uses of the String encoding of instance
649 mike 1.51 names (such as might appear in MOF for static association
650 instances or in the CGI client), this solution is non-standard and
651 therefore unacceptable. It is likely that these points will need
652 to process the more expensive operation of retrieving the class
653 definition to determine the key property types.
654
655 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
656 in case of error in setting trace components. Modified the property owner
657 init and update methods. Submitted the pegasus/mak/Buildmakefile with
658 cleanbuild, rebuild and trace configuration options.
659
660 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
661 (instanceName).
662
663 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
664 GetProperty/SetProperty/EnumerateInstances request/response messages.
665 Added encoding and decoding of PropertyList parameters on all
666 relevant intrinsic methods.
667
668 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
669 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
670 mike 1.51
671 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
672 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
673 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
674 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
675 SystemNsk.cpp) contain stubs. The associated control files
676 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
677 nsk platform links.
678
679 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
680 toString() method for CIMValues of String type. The old behavior
681 returned an XML encoding of the String with special characters
682 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
683 would be returned as a"b. The new behavior just returns the
684 String value directly with no translation. (Note that
685 CIMValue.toXml() may still be used to get the XML-encoded value.)
686
687 This change was necessary in part to correct the behavior of the
688 repository. CreateInstance stores the instance name returned by
689 CIMInstance.getInstanceName(), which is built using calls to
690 CIMValue.toString(). GetInstance searches for the instance name
691 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
692 be successful, CreateInstance must have stored the instance name
693 in that same form, without special character encoding.
694
695 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
696 the CIMValue class. Eliminated improper use of CIMValue.toString(),
697 often replacing with CIMValue.get(String&) or CIMValue.toXml().
698 Also added some error handling in the indication handlers.
699
700 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
701 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
702 to handle local instance path and local classpath. Modified the
703 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
704 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
705
706 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
707 to hold the argument to ModifyInstance and the return values
708 from EnumerateInstances. The client and provider APIs need to
709 be updated to use this class.
710
711 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
712 mike 1.51 source files. This CLI allows addition, modification, removal and listing
713 of CIM users. The CLI is not linked to the main makefile as the Provider
714 functionality is yet to be implemented. Added the function
715 String getPassword(char* prompt) to the System.h and cpp files.
716
717 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
718 the server to challenge the unauthorized requests, authenticate
719 the challenge responses, and verify the subsequent authorized requests.
720 Implemented authentication mechanism on the Client api to send
721 responses to the challenges from the server. Current implementation
722 supports only 'local' authentication mechanism.
723
724 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
725
726 - Changed the return value of EnumerateInstances from Array<CIMInstance>
727 to Array<CIMNamedInstance>
728 - Changed the parameter to ModifyInstance from CIMInstance to
729 CIMNamedInstance
730 - Added an optional PropertyList parameter to ModifyInstance
731 - Changed all handling of PropertyList parameters to use the
732 CIMPropertyList class instead of Array<String>
733 mike 1.51
734 Each of these changes was required to comply with the DMTF specification.
735
736 These changes were made throughout the system except for in the provider
737 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
738 differences from providers, so older providers will continue to function.
739 However, this means that clients can not yet take advantage of the added
740 functionality.
741
742 When the provider API is updated, the following changes will be visible:
743
744 - Providers will get a PropertyList parameter to ModifyInstance which
745 they are required to respect. Providers that can not process the
746 PropertyList must throw a NOT_SUPPORTED exception whenever the
747 list is not null. Clients can take advantage of this change by
748 issuing a ModifyInstance request against a selected set of
749 properties in an instance, rather than being required to replace
750 the entire instance.
751
752 - Providers will be required to return instance names along with
753 instances in the EnumerateInstances method. Clients will receive
754 mike 1.51 these instance names, as the standard dictates.
755
756 - Providers will receive a CIMPropertyList argument containing the
757 PropertyList instead of an Array<String>. This change allows
758 providers to distinguish between an empty list and a null list.
759
760 Note that the repository also does not yet handle the PropertyList in
761 ModifyInstance correctly.
762
763 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
764 provider API to match the changes made to the EnumerateInstances and
765 ModifyInstance operations. These changes were made to comply with
766 the DMTF specification.
767
768 The original Provider API has not been updated, and I have no
769 plans to do so. Providers written to the original API will
770 continue to function, but they will not have the opportunity
771 to take advantage of the features that have been added.
772
773 The significant changes to the Provider2 API are:
774
775 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
776 they are required to respect. Providers that can not process the
777 PropertyList must throw a NOT_SUPPORTED exception whenever the
778 list is not null. Clients can take advantage of this change by
779 issuing a ModifyInstance request against a selected set of
780 properties in an instance, rather than being required to replace
781 the entire instance.
782
783 - Providers will get an IncludeQualifiers parameter to ModifyInstance
784 which they are required to respect. If IncludeQualifiers is
785 false, the qualifiers on the modified instance provided must not
786 be used to update the instance.
787
788 - Providers will be required to return instance names along with
789 instances in the EnumerateInstances method. Clients will receive
790 these instance names, as the standard dictates.
791
792 The providers that are in the Pegasus build have all been updated.
793 However, whenever the PropertyList is not null, the providers throw
794 a NOT_SUPPORTED exception.
795
796 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
797 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
798 the Common module. File Config.h was modified to include the NSK
799 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
800 without the standard (std) namespace.
801
802 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
803 properties to support alternate behavior of the Pegasus repository:
804 repositoryIsDefaultInstanceProvider and repositoryProviderName.
805
806 Using the first one, the repository can be enabled/disabled as the
807 default provider for instance (and association) operations. The default
808 setting is "true", so the default behavior has not been changed. To
809 disable the repository as the default instance provider, issue the
810 following command before starting cimserver:
811
812 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
813
814 The repositoryProviderName configuration property specifies what
815 provider name is used to explicitly register the repository as a
816 provider. This is necessary when the repository needs to serve
817 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
818 to "false". The default value is "repository". To register the
819 repository as an instance provider for a class, add a
820 'Provider("repository")' qualifier to the class definition.
821
822 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
823 pass to providers that act as services. This handle provides
824 service providers with access to the CIMServer data structures.
825
826 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
827 the repository so that it respects the IncludeQualifiers and
828 PropertyList parameters. Updated SetProperty in the repository
829 so that it uses ModifyInstance correctly. The repository now
830 supports GetProperty and SetProperty in addition to ModifyInstance.
831
832 Implemented GetProperty and SetProperty in the Dispatcher and
833 Provider2 so that they get translated to GetInstance and
834 ModifyInstance calls (respectively) in the provider. Providers
835 written to the Provider2 API that correctly process the new
836 ModifyInstance parameters will automatically support SetProperty
837 operations. Note that GetProperty and SetProperty currently only
838 mike 1.51 work for String properties because of an XML encoding limitation.
839
840 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
841 Security components for authentication and authorization.
842
843 Authentication and User Management:
844 cimuser CLI : This CLI is used for addition, modification, removal
845 and listing of CIM Users. The CIM user password is encrypted and stored
846 in a file. The password file format is compatible with Apache's htpasswd
847 generated password file.
848
849 cimauth CLI implement the authorization managment functionality by letting
850 to add/remove/list user authorizations.
851
852 User Manager and User Manager Provider components implement the user
853 management and authorization functionality.
854
855 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
856 under src/Pegasus/WQL which contains library and BNF.
857
858 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
859 mike 1.51 which does provider registration, block, unblock, and stop a provider.
860 It also alert Subscription Service of any provider registration changes.
861
862 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
863 and String.cpp with PEG_min. The _min macro caused problems on the
864 NSK platform because of a duplicate definition in a standard file.
865
866 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
867 subscription service provider that serves as the instance provider for the
868 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
869 classes (from CIM_Events27.mof). The service also takes appropriate action
870 in response to startup, shutdown of the cimom, termination of a provider,
871 or change in provider registration.
872
873 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
874 and the command line interface for shutting down cimom gracefully.
875 For more information, refer to the CIMOM Shutdown working paper
876 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
877
878 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
879 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
880 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
881 constructor to set a pointer to the server-, resp. client wide SSL_Context
882 structure. The Socket field in HTTPConnection is substituted with an
883 MP_Socket pointer, a class that is designed to hide the differences
884 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
885 is defined even in a non-ssl environment.
886 How to use it in a Server or Client:
887 1. Just create an SSL_Context once per Server/Client address space
888 2. Construct every HTTPConnector/Acceptor with a pointer to this
889 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
890 without SSL_Context for conventional connections.
|
891 mike 1.50
|
892 mike 1.51 The Configuration data was extended with the boolean SSL property, and
893 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
894
895 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
896 kumpf 1.61
|
897 mike 1.51 ---------------------------------------------------------------------------
898 Version 1.1 - July 2001 Development branch
899 Tagged as version_1_01 on 3 August 2001 (sorry should have been
900 1.1
901
902 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
903 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
904 and ExportClient classes. the indication.
905
906 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
907 make the delivery of indications over Xml-HTTP and email respectively.
908
909 Provided examples for HandlerTable, XmlIndicationDelivery and
910 SendMailIndicationDelivery to support this implementation.
911
912 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
913 library and a thread-safe message queue (first stage). Classes defined
914 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
915 and SimpleThread.
916
917 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
918 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
919 information on using wbemexec. A simple test script is included. Please
920 see pegasus/src/Clients/wbemexec/tests/readme for information on running
921 the test script.
922
923 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
924 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
925 and
926 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
927 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
928 src/Pegasus/Common/TraceFileHandler.cpp.
929
930 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
931 Config CLI. Please refer to the documentation
932 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
933 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
934 using the config framework and cimconfig CLI. Make sure to load the config
935 mof (src/gmake config) before starting the cimserver. A simple test script
936 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
937 information on running the test script.
938
939 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
940 (changed the H and CPP files for the major CIM objects. These
941 functions generate CIM MOF output for the objects.
942
943 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
944 Authentication provides security mechanism to authenticates CIM clients
945 that
946 connect to CIM Server on the same system without having to specify a
947 password.
948 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
949 This component only works on unix and it's not linked in with the main
950 build.
951 When authentication framework is defined this component may need to be
952 modified to integrate with the framework.
|
953 karl 1.49
954 ---------------------------------------------------------------------------
955 Version 0.99.x (Fixes to version 0.99) in Process
|
956 mike 1.51
|
957 karl 1.49 NOTE: Please do not input anything to this branch except for critical
958 fixes. This is, in effect, 1.0 and we do not want to use it for
959 development.
960
961 ----------------------------------------------------------------------------
962
963 Version 0.98.0 - Work in progress (This number skipped)
|
964 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
965 mike 1.36
|
966 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
967 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
968
|
969 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
970 in the HTML URL reference for passing instance names.
971
|
972 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
973
974 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
975
|
976 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
977 allow slp to compile.
978
|
979 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
980
981 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
982 ids to queue pointers).
983
|
984 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
985 and Dispatcher.
986
|
987 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
988 and
989 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
990 chip 1.44 ResponseHandler for Provider2 interface.
|
991 mike 1.45
992 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
993
994 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
995
|
996 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
997
|
998 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
999
1000 12. (Mike Brasher) - Fixed compiler error on Linux.
1001
|
1002 karl 1.38 ------------------------------------------------------------------------------
1003 --
|
1004 mike 1.26
|
1005 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
1006 karl 1.16
1007 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1008 for NT and Linux platforms.
|
1009 mike 1.26
|
1010 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1011 5988.
1012 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1013 the DMTF.
|
1014 mike 1.26
|
1015 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1016 Fusion event. THis included a) extended the test for end of HTTP header from
1017 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1018 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1019 mike 1.26
|
1020 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1021 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1022 revamping the compiler to work independently of the repository (grb).
|
1023 mike 1.26
|
1024 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1025 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1026 Now when you build normally, you will get the committed grammar and parser
1027 files instead of generating your own for a particular platform. This should
1028 prevent back-level lex and yacc implementations from generating troublesome
1029 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1030 bob 1.20 (grb)
|
1031 mike 1.26
|
1032 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1033 This change paves the way for upcoming changes that will allow the compiler
1034 to work indepently of the repository. (grb)
|
1035 mike 1.26
|
1036 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1037 mike 1.26
|
1038 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1039 modifyClass,
|
1040 chip 1.22 createClass to protect caller's object.
|
1041 mike 1.26
|
1042 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1043 directory. These
1044 interfaces allow very smart providers to perform advances operations.
1045 CIMProviderStub has
|
1046 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1047 mike 1.26
|
1048 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1049 mike 1.26
|
1050 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1051 repository you make world, make rebuild or make repository. ks
|
1052 mike 1.26
1053 12. Added associators() and associatorNames() operations to CIM repository.
|
1054 mike 1.27 (MEB)
1055
1056 13. More on association implementation (all four operations supported).
1057 Need to handle deletion of associations and protocol stubs still.
1058 Need to test class associations (rather than just instance associations).
1059 Need to handle deleteInstance().
1060 (MEB)
|
1061 mike 1.26
|
1062 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1063
|
1064 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1065 AssociationName
|
1066 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1067 pages.
1068
|
1069 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1070 sage 1.31
1071 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1072 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1073 Made cimserver accept the -D flag to eliminate the need for environment
1074 variables.
|
1075 mike 1.32
1076 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1077 References() and ReferenceNames() CIM operations. These only operate
1078 on instances at this time. They will operate on classes soon.
|
1079 kumpf 1.34
1080 19. (Mike Glantz) Extended and modified dynamic support
1081 changes to (1) work on HP-UX and (2) have all images and libraries
1082 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1083 change is to program.mak and library-unix.mak, removing specific
1084 lists of dynamic library specs and putting them in the Makefile
1085 and libraries.mak files that build the actual targets (lots of
1086 these now have DYNAMIC_LIBRARIES defined).
|
1087 karl 1.35
1088 20. (Karl) added basic Queue function to common (based on array) and added
1089 tests for stack and queue.
|
1090 karl 1.38
1091 ------------------------------------------------------------------------------
1092 --
|
1093 mike 1.36
|
1094 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1095 karl 1.11
|
1096 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1097 CIMServer (both)
|
1098 karl 1.11 Functions added include:
1099 a. Enable trace to log file.
|
1100 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1101 is
|
1102 karl 1.11 trace to log, -t is trace to console).
1103 c. add parameter in optionsrow for help message and enable the capture
|
1104 karl 1.12 of these messages in Options class. Also added help print that
1105 prints these things out. However, format not to beautiful.
|
1106 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1107 e. Extend the Clients\testclient so he does tests on Namespace.
|
1108 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1109 mike 1.33
|
1110 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1111 mike 1.33
|
1112 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1113 logs
|
1114 karl 1.12 are put
|
1115 mike 1.33
|
1116 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1117 This is a preliminary version.
|
1118 mike 1.33
|
1119 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1120 karl 1.13 throws CannotBind exception.
|
1121 mike 1.33
|
1122 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1123 not
|
1124 karl 1.14 print out all of the message. At the least it prints out the error message
1125 and components of the message causing the problem.
|
1126 mike 1.33
|
1127 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1128 mike 1.33
|
1129 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1130 karl 1.14 existed.
|
1131 mike 1.33
1132 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1133 karl 1.15
|
1134 karl 1.29 ------------------------------------------------------------------------------
1135 --
|
1136 karl 1.6 Version 0.97.2
1137
1138 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1139 2. Extend Formatter for Boolean and Uint32 types.
1140 3. Change CIM Server to use Trace (-t) flag. This also changed
1141 Handler.h to work off of flag.
1142 4. Minor corrections to __Namespace Provider.
1143 5. Extend tests for Formatter, String, and other modules.
1144 6. Correct errors in documentation.
1145 7. New working papers (provider interface).
|
1146 karl 1.8 8. Add Providerreg.exe tool.
1147 9. Add trace output for messages sent from the Server.
|
1148 mike 1.26
|
1149 karl 1.29 ------------------------------------------------------------------------------
1150 --
|
1151 mike 1.26
|
1152 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1153 karl 1.5
|
1154 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1155 find functions. Note: This symbol is defined in config.h. (ks).
1156
|
1157 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1158 of dynamic lib loaading.
|
1159 karl 1.1
1160
|
1161 karl 1.29 ------------------------------------------------------------------------------
1162 --
|
1163 mike 1.26
|
1164 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1165 karl 1.1
1166 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1167 qualifiers, methods.
1168 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1169 methods.
1170 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1171 qualifiers and to
1172 remove qualifiers.
1173 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1174 compiler. It probably imposed more limitations than would be required with
|
1175 karl 1.2 the current compiler. This version of the port produces an excessively large
1176 common module due to template bloat. That problem will be fixed in a future
1177 change to the port. Also there are a log of duplicate symbol warnings generate
1178 by the AIC compiler but these cause no problems. The port has been tested
1179 with the complete unit test and client/server test successfully.
|
1180 karl 1.1
1181 --------------------------------------------------------------------------
|
1182 karl 1.2
|
1183 mike 1.4 23 May 2001
|
1184 karl 1.1
|
1185 mike 1.9 1. Ported to HPUX
|
1186 karl 1.5
|
1187 mike 1.9 --------------------------------------------------------------------------
1188
1189 29 May 2001
1190
1191 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1192 mike 1.51
1193
1194
1195
|
1196 karl 1.48
|
1197 karl 1.38
|
1198 karl 1.30
|
1199 karl 1.29
|
1200 mike 1.10
|