1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
303 in XmlReader.cpp.
304
|
305 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
306 Authentication handling code and cleaned up ATTN's in the authentication
307 releated files. Implemented a new AuthenticationInfoRep class and modified
308 the related files. Added more test cases to test the authentication classes.
309
|
310 ramnath 1.87 33. (Ramnath Ravindran - Compaq) 21 March 2002 - replaced instances of "| ios::binary" with PEGASUS_OR_IOS_BINARY in 3 files: System.cpp, InstanceIndexFile.cpp, and
311 InstanceDataFile.cpp
|
312 karl 1.59 -------------------------------------------------------------------
|
313 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
314
315 1. Merged back to Main branch. All general development will be in main branch
316 in the future with releases in side branches. Special side developments
317 may temporarily be in side branches.
318 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
319 karl 1.53
320 2. (Karl) 18 December 2001 - Added new directory repositories where repository
321 implementations will be kept to separate them from the
322 repository interface defintion. Initial implementation is genericfile
323 which is the current file based repository.
324
325 Added new build variable RMREPOSITORY which is a generic MAKE command
326 to remove an existing repository. It simply substitutes for the RMDIRHIER
327 command at this point but we will make this a generic part of system
328 in the future.
|
329 karl 1.52
|
330 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
331 to check that all required parameters for intrinsic methods are
332 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
333 exception is thrown. Also added checks for duplicate parameters in the
334 intrinsic methods. If a parameter is specified more than once, a
335 CIM_ERR_INVALID_PARAMETER exception is thrown.
336
|
337 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
338 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
339 queue to this new queue. Modified CIMServer.cpp to create
340 CIMOperationRequestAuthorizer queue only when authorization is enabled.
341 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
342 it available to the CIMOperationRequestDispatcher.
343
|
344 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
345 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
346 forever. The problem was noticed when the TestClient program and CIMserver
347 service were both running. The service wasn't accessible to the TestClient
348 program.
349
|
350 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
351 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
352 in new queue, IndicationService which will get invoked from dispatcher.
353 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
354 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
355 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
356 CIM_GET_INSTANCE_REQUEST_MESSAGE
357 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
358 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
359
360 This new service will also take care of processing the indications on receiving
361 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
362 IndicationProvider or some other mechanism which is not yet clear.
363
364 IndicationService will also receive following messages from PG_ProviderRegistration
365 when a new IndicationProvider will get registered.
366 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
367 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
368
369 I had also defined new Indication Provider APIs, enableIndication, disableIndication
370 and modifyIndication with more parameters passed and eventually planning to terminate
371 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
372 plan to implement one more call as startIndication and will be done soon.
373
374 There are three new test programs in IndicationService directory, which will create
375 Filter, Indication and Subscription instances using IndicationService.
376
377 Also modified sample IndicationProvider code with the new APIs introduced.
|
378 mary 1.56
|
379 karl 1.52 -------------------------------------------------------------------------
|
380 karl 1.1
|
381 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
382 current working dev branch of build
|
383 mike 1.36
|
384 karl 1.49 ---------------------------------------------------------------------------
385 Version 1.1 - July 2001 Development branch (Work in PRogress)
386
|
387 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
388 PARAMETER.REFERENCE constructs for references).
389
390 2. (Mike Brasher) Reworked server communication into new module scheme.
|
391 mike 1.51 =======
392 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
393 seen as part of CGIclient class displays.
394
395 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
396 to the final version in Schemas\CIM25. This included minor
397 corrections, etc and a couple of file changes. This is the
398 official final CIM 25 schema relesed by the DMTF. This change
399 should not affect any current work.
400 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
401 directorys. Note however that today the make repository still
402 loads the 2.5 schema.
403
404 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
405 on XML output.
406
407 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
408 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
409 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
410 declarations in for loop initializers outside the loop, so multiple
411 "for (int i=0; i<10; i++);" statements cause a compile error.
412 mike 1.51
413 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
414 dependency on the config files at the start of the cimserver. Now the
415 cimserver will use in-memory default values in the absence of config files
416 and command line options. Fixed a few defects in the config framework that
417 were causing cimom to crash under certain conditions. Changed the config
418 provider class name to 'PG_ConfigSetting' in the mof file and modified
419 provider implementation files accordingly. Also modified the config CLI
420 to show user friendly error/status messages.
421
422 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
423 (reported incorrect line number on error in XML request if input redirected).
424 Enhanced the -d debug command line option to allow more flexibility in
425 generating debug output.
426
427 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
428 xml when it generates xml output.
429
430 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
431 a common file to reduce the number of files required by the default
432 repository implementation.
433 mike 1.51
434 10. (Mike Brasher) - Fixed minor bug in repository implementation.
435
436 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
437
438 12. (Mike Brasher) - Committed rework of server into queue approach.
439
440 13. (Mike Brasher) - New webserver and webclient examples.
441
442 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
443
444 15. (Mike Brasher) - Initial work on refactorying client into modules.
445 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
446
447 16. (Mike Brasher) - queue-based clients now complete.
448
449 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
450
451 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
452
453 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
454 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
455 a web server. See doc/Servlet for more information.
456
457 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
458 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
459 input and output can be written in a trace file.
460
461 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
462 Created new class SignalHandler that allow registration, activation and
463 deactivation of signal handler functions (Linux only !).
464
465 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
466 ExportClient to support ExportIndication. DisplayConsumer, a sample
467 consumer is added which will consume (by displaying on screen) the
468 indication exported by CIMExportRequestDispatcher. This complete
469 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
470 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
471 are modified to implement above messages.
472
473 XmlIndicationDispatcher test program is modified to test complete
474 operation. It now creates a consumer, handler and indication
475 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
476 indication to consumer. This program needs
477 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
478 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
479 in the repository to complete the test successfully. This test
480 program also needs Handler qualifier defined in repository and
481 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
482 below:
483
484 //====================================================================
485 // CIM_IndicationHandlerXMLHTTP
486 //====================================================================
487 [Description (
488 "CIM_IndicationHandlerXMLHTTP describes the destination for "
489 "Indications to be delivered via HTTP, using a cimXML "
490 "representation."), Handler ("CIMxmlIndicationHandler") ]
491
492 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
493 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
494 a provider library.
495
496 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
497 interface for the provider. InvokeMethod currently uses CIMValue as
498 type for inParameters and outParameters, which are unable to give
499 information about param name, type and value. This should be changed
500 to CIMParamValue which will help providers to know details of the
501 parameter name and type along with value passed through InvoleMethod
502 call. Current implementation uses CIMParamValue as parameters while
503 travelling through message queues and converts it back to array of
504 CIMValue before calling Provider API (which needs to be changed
505 later).
506
507 Also added are two test programs:
508
509 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
510 CIMParamValue class.
511
512 src/Pegasus/Client/tests/InvokeMethod - which makes call to
513 InvokeMethod and displays the return value. Current
514 implementation assumes that provider had returned true value
515 and outParameters (which are now hard coded in
516 CIMOperationRequestDispatcher to implement functionality)
517 mike 1.51 which are passed as response of InvokeMethod to client.
518
519 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
520 authentication to the pegasus code. Created an Authentication Manager
521 and authenticator interfaces. The file based local authentication
522 module has been modified to implement the local authenticator
523 interface, to generate the challenge for the unauthorized requests
524 and to verify the authentication.
525
526 A skeleton program has been created for the Basic Authenticator.
527 This code is in the Security/Authentication directory which is not
528 yet linked into the build.
529
530 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
531 Decoders. Earlier decoders were sending requests and responses
532 before finishing complete Xml parse. This was prone to send
533 request/response even the Xml is wrong after the MethodCall.
534 New changes collects the Message* as return value from the
535 appropriate functions while parsing the Xml and sends on
536 _outputQueue only when Xml is parsed successfully.
537
538 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
539 fix the problem with constructing provider name and loading the
540 providers for unix platforms. Also moved the shared library name
541 construction (appending .sl or .so) from
542 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
543 ProviderModule.cpp and included it in a method that returns
544 provider file path name.
545
546 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
547 Handler. This handler extracts MappingStrings qualifier from class
548 definition and converts it into SNMP specific trap data. The trap
549 structure is defined in a abstract class in snmpDeliverTrap.h file.
550 Every one has his or her own SNMP agent, which will talk with master
551 agent to deliver the trap or may have some other mechanism.
552 Extending snmpDeliverTrap class and deliverTrap method will help to
553 implement specific trap delivery mechanism.
554
555 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
556 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
557 property value to be default in the plan file, remove the property from the
558 plan file. Converted ConfigSettingProvider to use provider2 library.
559 mike 1.51
560 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
561 to allow tracing of a specific number of bytes in a given
562 string. Also modified the XmlIO trace code to use the new interface.
563 Changed the config file defaults for tracing.
564
565 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
566 NonStop platform (NSK) in directory pegasus/mak. The following files
567 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
568 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
569 program-unix.mak. The original program.mak which previously covered
570 all platforms was split into platform-specific make files, and now
571 only contains conditionals. Files config.mak, objects.mak, and
572 library.mak were changed to include the NSK files.
573 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
574
575 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
576 commas (,) in the string values of key properties.
577
578 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
579
580 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
581 pegasus/mak/program-windows.mak that prevented program builds for
582 the windows platform (related to change from 28 Oct). Replaced
583 leading whitespace in front of commands with tabs as required
584 in make files.
585
586 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
587 because getting an error in 26
588
589 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
590 whose types are references. These reference values must be
591 treated specially in the XML encoding, using the VALUE.REFERENCE
592 tag structure.
593
594 Pegasus had been passing reference values simply as String values.
595 For example, EnumerateInstanceNames returned KEYVALUEs of string
596 type rather than VALUE.REFERENCEs.
597
598 I've modified the XmlReader::getKeyBindingElement() and
599 CIMReference::instanceNameToXml() methods to read and write the
600 XML in the proper format. However, making that change required
601 mike 1.51 that a CIMReference object be able to distinguish between a key
602 of String type and a key of reference type.
603
604 I've modified the String format of CIMReferences slightly to
605 allow efficient processing of references whose keys are also of
606 reference type. The "official" form uses the same encoding for
607 key values of String type and of reference type, and so it
608 would be necessary to retrieve the class definition and look up
609 the types of the key properties to determine how to treat the
610 key values. This is clearly too inefficient for internal
611 transformations between CIMReferences and String values.
612
613 The workaround is to encode a 'R' at the beginning of the value
614 for a key of reference type (before the opening '"'). This allows
615 the parser to know a priori whether the key is of String or
616 reference type.
617
618 In this example:
619
620 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
621
622 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
623 the usual encoding. Key2 is a reference property, so the extra 'R'
624 is inserted before its encoded value. Note that this algorithm is
625 recursive, such that RefClass could include KeyC of reference type,
626 which would also get encoded with the 'R' notation.
627
628 The toString() method inserts the 'R' to provide symmetry. A new
629 KeyBinding type (REFERENCE) has been defined to denote keys in a
630 CIMReference that are of reference type. This KeyBinding type must
631 be used appropriately for CIMReference::ttoString() to behave
632 correctly.
633
634 The files that have been modified to make this change are
635 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
636
637 A result of this change is that instances names in the instance
638 repository will include this extra 'R' character. Thus, you will
639 need to repopulate your repository when you download the latest
640 CIMOM version.
641
642 Note that for user-facing uses of the String encoding of instance
643 mike 1.51 names (such as might appear in MOF for static association
644 instances or in the CGI client), this solution is non-standard and
645 therefore unacceptable. It is likely that these points will need
646 to process the more expensive operation of retrieving the class
647 definition to determine the key property types.
648
649 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
650 in case of error in setting trace components. Modified the property owner
651 init and update methods. Submitted the pegasus/mak/Buildmakefile with
652 cleanbuild, rebuild and trace configuration options.
653
654 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
655 (instanceName).
656
657 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
658 GetProperty/SetProperty/EnumerateInstances request/response messages.
659 Added encoding and decoding of PropertyList parameters on all
660 relevant intrinsic methods.
661
662 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
663 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
664 mike 1.51
665 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
666 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
667 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
668 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
669 SystemNsk.cpp) contain stubs. The associated control files
670 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
671 nsk platform links.
672
673 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
674 toString() method for CIMValues of String type. The old behavior
675 returned an XML encoding of the String with special characters
676 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
677 would be returned as a"b. The new behavior just returns the
678 String value directly with no translation. (Note that
679 CIMValue.toXml() may still be used to get the XML-encoded value.)
680
681 This change was necessary in part to correct the behavior of the
682 repository. CreateInstance stores the instance name returned by
683 CIMInstance.getInstanceName(), which is built using calls to
684 CIMValue.toString(). GetInstance searches for the instance name
685 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
686 be successful, CreateInstance must have stored the instance name
687 in that same form, without special character encoding.
688
689 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
690 the CIMValue class. Eliminated improper use of CIMValue.toString(),
691 often replacing with CIMValue.get(String&) or CIMValue.toXml().
692 Also added some error handling in the indication handlers.
693
694 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
695 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
696 to handle local instance path and local classpath. Modified the
697 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
698 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
699
700 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
701 to hold the argument to ModifyInstance and the return values
702 from EnumerateInstances. The client and provider APIs need to
703 be updated to use this class.
704
705 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
706 mike 1.51 source files. This CLI allows addition, modification, removal and listing
707 of CIM users. The CLI is not linked to the main makefile as the Provider
708 functionality is yet to be implemented. Added the function
709 String getPassword(char* prompt) to the System.h and cpp files.
710
711 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
712 the server to challenge the unauthorized requests, authenticate
713 the challenge responses, and verify the subsequent authorized requests.
714 Implemented authentication mechanism on the Client api to send
715 responses to the challenges from the server. Current implementation
716 supports only 'local' authentication mechanism.
717
718 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
719
720 - Changed the return value of EnumerateInstances from Array<CIMInstance>
721 to Array<CIMNamedInstance>
722 - Changed the parameter to ModifyInstance from CIMInstance to
723 CIMNamedInstance
724 - Added an optional PropertyList parameter to ModifyInstance
725 - Changed all handling of PropertyList parameters to use the
726 CIMPropertyList class instead of Array<String>
727 mike 1.51
728 Each of these changes was required to comply with the DMTF specification.
729
730 These changes were made throughout the system except for in the provider
731 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
732 differences from providers, so older providers will continue to function.
733 However, this means that clients can not yet take advantage of the added
734 functionality.
735
736 When the provider API is updated, the following changes will be visible:
737
738 - Providers will get a PropertyList parameter to ModifyInstance which
739 they are required to respect. Providers that can not process the
740 PropertyList must throw a NOT_SUPPORTED exception whenever the
741 list is not null. Clients can take advantage of this change by
742 issuing a ModifyInstance request against a selected set of
743 properties in an instance, rather than being required to replace
744 the entire instance.
745
746 - Providers will be required to return instance names along with
747 instances in the EnumerateInstances method. Clients will receive
748 mike 1.51 these instance names, as the standard dictates.
749
750 - Providers will receive a CIMPropertyList argument containing the
751 PropertyList instead of an Array<String>. This change allows
752 providers to distinguish between an empty list and a null list.
753
754 Note that the repository also does not yet handle the PropertyList in
755 ModifyInstance correctly.
756
757 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
758 provider API to match the changes made to the EnumerateInstances and
759 ModifyInstance operations. These changes were made to comply with
760 the DMTF specification.
761
762 The original Provider API has not been updated, and I have no
763 plans to do so. Providers written to the original API will
764 continue to function, but they will not have the opportunity
765 to take advantage of the features that have been added.
766
767 The significant changes to the Provider2 API are:
768
769 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
770 they are required to respect. Providers that can not process the
771 PropertyList must throw a NOT_SUPPORTED exception whenever the
772 list is not null. Clients can take advantage of this change by
773 issuing a ModifyInstance request against a selected set of
774 properties in an instance, rather than being required to replace
775 the entire instance.
776
777 - Providers will get an IncludeQualifiers parameter to ModifyInstance
778 which they are required to respect. If IncludeQualifiers is
779 false, the qualifiers on the modified instance provided must not
780 be used to update the instance.
781
782 - Providers will be required to return instance names along with
783 instances in the EnumerateInstances method. Clients will receive
784 these instance names, as the standard dictates.
785
786 The providers that are in the Pegasus build have all been updated.
787 However, whenever the PropertyList is not null, the providers throw
788 a NOT_SUPPORTED exception.
789
790 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
791 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
792 the Common module. File Config.h was modified to include the NSK
793 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
794 without the standard (std) namespace.
795
796 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
797 properties to support alternate behavior of the Pegasus repository:
798 repositoryIsDefaultInstanceProvider and repositoryProviderName.
799
800 Using the first one, the repository can be enabled/disabled as the
801 default provider for instance (and association) operations. The default
802 setting is "true", so the default behavior has not been changed. To
803 disable the repository as the default instance provider, issue the
804 following command before starting cimserver:
805
806 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
807
808 The repositoryProviderName configuration property specifies what
809 provider name is used to explicitly register the repository as a
810 provider. This is necessary when the repository needs to serve
811 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
812 to "false". The default value is "repository". To register the
813 repository as an instance provider for a class, add a
814 'Provider("repository")' qualifier to the class definition.
815
816 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
817 pass to providers that act as services. This handle provides
818 service providers with access to the CIMServer data structures.
819
820 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
821 the repository so that it respects the IncludeQualifiers and
822 PropertyList parameters. Updated SetProperty in the repository
823 so that it uses ModifyInstance correctly. The repository now
824 supports GetProperty and SetProperty in addition to ModifyInstance.
825
826 Implemented GetProperty and SetProperty in the Dispatcher and
827 Provider2 so that they get translated to GetInstance and
828 ModifyInstance calls (respectively) in the provider. Providers
829 written to the Provider2 API that correctly process the new
830 ModifyInstance parameters will automatically support SetProperty
831 operations. Note that GetProperty and SetProperty currently only
832 mike 1.51 work for String properties because of an XML encoding limitation.
833
834 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
835 Security components for authentication and authorization.
836
837 Authentication and User Management:
838 cimuser CLI : This CLI is used for addition, modification, removal
839 and listing of CIM Users. The CIM user password is encrypted and stored
840 in a file. The password file format is compatible with Apache's htpasswd
841 generated password file.
842
843 cimauth CLI implement the authorization managment functionality by letting
844 to add/remove/list user authorizations.
845
846 User Manager and User Manager Provider components implement the user
847 management and authorization functionality.
848
849 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
850 under src/Pegasus/WQL which contains library and BNF.
851
852 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
853 mike 1.51 which does provider registration, block, unblock, and stop a provider.
854 It also alert Subscription Service of any provider registration changes.
855
856 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
857 and String.cpp with PEG_min. The _min macro caused problems on the
858 NSK platform because of a duplicate definition in a standard file.
859
860 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
861 subscription service provider that serves as the instance provider for the
862 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
863 classes (from CIM_Events27.mof). The service also takes appropriate action
864 in response to startup, shutdown of the cimom, termination of a provider,
865 or change in provider registration.
866
867 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
868 and the command line interface for shutting down cimom gracefully.
869 For more information, refer to the CIMOM Shutdown working paper
870 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
871
872 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
873 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
874 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
875 constructor to set a pointer to the server-, resp. client wide SSL_Context
876 structure. The Socket field in HTTPConnection is substituted with an
877 MP_Socket pointer, a class that is designed to hide the differences
878 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
879 is defined even in a non-ssl environment.
880 How to use it in a Server or Client:
881 1. Just create an SSL_Context once per Server/Client address space
882 2. Construct every HTTPConnector/Acceptor with a pointer to this
883 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
884 without SSL_Context for conventional connections.
|
885 mike 1.50
|
886 mike 1.51 The Configuration data was extended with the boolean SSL property, and
887 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
888
889 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
890 kumpf 1.61
|
891 mike 1.51 ---------------------------------------------------------------------------
892 Version 1.1 - July 2001 Development branch
893 Tagged as version_1_01 on 3 August 2001 (sorry should have been
894 1.1
895
896 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
897 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
898 and ExportClient classes. the indication.
899
900 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
901 make the delivery of indications over Xml-HTTP and email respectively.
902
903 Provided examples for HandlerTable, XmlIndicationDelivery and
904 SendMailIndicationDelivery to support this implementation.
905
906 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
907 library and a thread-safe message queue (first stage). Classes defined
908 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
909 and SimpleThread.
910
911 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
912 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
913 information on using wbemexec. A simple test script is included. Please
914 see pegasus/src/Clients/wbemexec/tests/readme for information on running
915 the test script.
916
917 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
918 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
919 and
920 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
921 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
922 src/Pegasus/Common/TraceFileHandler.cpp.
923
924 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
925 Config CLI. Please refer to the documentation
926 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
927 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
928 using the config framework and cimconfig CLI. Make sure to load the config
929 mof (src/gmake config) before starting the cimserver. A simple test script
930 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
931 information on running the test script.
932
933 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
934 (changed the H and CPP files for the major CIM objects. These
935 functions generate CIM MOF output for the objects.
936
937 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
938 Authentication provides security mechanism to authenticates CIM clients
939 that
940 connect to CIM Server on the same system without having to specify a
941 password.
942 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
943 This component only works on unix and it's not linked in with the main
944 build.
945 When authentication framework is defined this component may need to be
946 modified to integrate with the framework.
|
947 karl 1.49
948 ---------------------------------------------------------------------------
949 Version 0.99.x (Fixes to version 0.99) in Process
|
950 mike 1.51
|
951 karl 1.49 NOTE: Please do not input anything to this branch except for critical
952 fixes. This is, in effect, 1.0 and we do not want to use it for
953 development.
954
955 ----------------------------------------------------------------------------
956
957 Version 0.98.0 - Work in progress (This number skipped)
|
958 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
959 mike 1.36
|
960 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
961 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
962
|
963 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
964 in the HTML URL reference for passing instance names.
965
|
966 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
967
968 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
969
|
970 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
971 allow slp to compile.
972
|
973 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
974
975 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
976 ids to queue pointers).
977
|
978 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
979 and Dispatcher.
980
|
981 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
982 and
983 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
984 chip 1.44 ResponseHandler for Provider2 interface.
|
985 mike 1.45
986 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
987
988 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
989
|
990 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
991
|
992 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
993
994 12. (Mike Brasher) - Fixed compiler error on Linux.
995
|
996 karl 1.38 ------------------------------------------------------------------------------
997 --
|
998 mike 1.26
|
999 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
1000 karl 1.16
1001 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1002 for NT and Linux platforms.
|
1003 mike 1.26
|
1004 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1005 5988.
1006 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1007 the DMTF.
|
1008 mike 1.26
|
1009 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1010 Fusion event. THis included a) extended the test for end of HTTP header from
1011 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1012 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1013 mike 1.26
|
1014 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1015 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1016 revamping the compiler to work independently of the repository (grb).
|
1017 mike 1.26
|
1018 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1019 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1020 Now when you build normally, you will get the committed grammar and parser
1021 files instead of generating your own for a particular platform. This should
1022 prevent back-level lex and yacc implementations from generating troublesome
1023 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1024 bob 1.20 (grb)
|
1025 mike 1.26
|
1026 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1027 This change paves the way for upcoming changes that will allow the compiler
1028 to work indepently of the repository. (grb)
|
1029 mike 1.26
|
1030 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1031 mike 1.26
|
1032 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1033 modifyClass,
|
1034 chip 1.22 createClass to protect caller's object.
|
1035 mike 1.26
|
1036 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1037 directory. These
1038 interfaces allow very smart providers to perform advances operations.
1039 CIMProviderStub has
|
1040 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1041 mike 1.26
|
1042 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1043 mike 1.26
|
1044 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1045 repository you make world, make rebuild or make repository. ks
|
1046 mike 1.26
1047 12. Added associators() and associatorNames() operations to CIM repository.
|
1048 mike 1.27 (MEB)
1049
1050 13. More on association implementation (all four operations supported).
1051 Need to handle deletion of associations and protocol stubs still.
1052 Need to test class associations (rather than just instance associations).
1053 Need to handle deleteInstance().
1054 (MEB)
|
1055 mike 1.26
|
1056 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1057
|
1058 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1059 AssociationName
|
1060 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1061 pages.
1062
|
1063 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1064 sage 1.31
1065 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1066 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1067 Made cimserver accept the -D flag to eliminate the need for environment
1068 variables.
|
1069 mike 1.32
1070 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1071 References() and ReferenceNames() CIM operations. These only operate
1072 on instances at this time. They will operate on classes soon.
|
1073 kumpf 1.34
1074 19. (Mike Glantz) Extended and modified dynamic support
1075 changes to (1) work on HP-UX and (2) have all images and libraries
1076 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1077 change is to program.mak and library-unix.mak, removing specific
1078 lists of dynamic library specs and putting them in the Makefile
1079 and libraries.mak files that build the actual targets (lots of
1080 these now have DYNAMIC_LIBRARIES defined).
|
1081 karl 1.35
1082 20. (Karl) added basic Queue function to common (based on array) and added
1083 tests for stack and queue.
|
1084 karl 1.38
1085 ------------------------------------------------------------------------------
1086 --
|
1087 mike 1.36
|
1088 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1089 karl 1.11
|
1090 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1091 CIMServer (both)
|
1092 karl 1.11 Functions added include:
1093 a. Enable trace to log file.
|
1094 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1095 is
|
1096 karl 1.11 trace to log, -t is trace to console).
1097 c. add parameter in optionsrow for help message and enable the capture
|
1098 karl 1.12 of these messages in Options class. Also added help print that
1099 prints these things out. However, format not to beautiful.
|
1100 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1101 e. Extend the Clients\testclient so he does tests on Namespace.
|
1102 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1103 mike 1.33
|
1104 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1105 mike 1.33
|
1106 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1107 logs
|
1108 karl 1.12 are put
|
1109 mike 1.33
|
1110 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1111 This is a preliminary version.
|
1112 mike 1.33
|
1113 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1114 karl 1.13 throws CannotBind exception.
|
1115 mike 1.33
|
1116 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1117 not
|
1118 karl 1.14 print out all of the message. At the least it prints out the error message
1119 and components of the message causing the problem.
|
1120 mike 1.33
|
1121 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1122 mike 1.33
|
1123 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1124 karl 1.14 existed.
|
1125 mike 1.33
1126 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1127 karl 1.15
|
1128 karl 1.29 ------------------------------------------------------------------------------
1129 --
|
1130 karl 1.6 Version 0.97.2
1131
1132 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1133 2. Extend Formatter for Boolean and Uint32 types.
1134 3. Change CIM Server to use Trace (-t) flag. This also changed
1135 Handler.h to work off of flag.
1136 4. Minor corrections to __Namespace Provider.
1137 5. Extend tests for Formatter, String, and other modules.
1138 6. Correct errors in documentation.
1139 7. New working papers (provider interface).
|
1140 karl 1.8 8. Add Providerreg.exe tool.
1141 9. Add trace output for messages sent from the Server.
|
1142 mike 1.26
|
1143 karl 1.29 ------------------------------------------------------------------------------
1144 --
|
1145 mike 1.26
|
1146 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1147 karl 1.5
|
1148 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1149 find functions. Note: This symbol is defined in config.h. (ks).
1150
|
1151 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1152 of dynamic lib loaading.
|
1153 karl 1.1
1154
|
1155 karl 1.29 ------------------------------------------------------------------------------
1156 --
|
1157 mike 1.26
|
1158 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1159 karl 1.1
1160 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1161 qualifiers, methods.
1162 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1163 methods.
1164 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1165 qualifiers and to
1166 remove qualifiers.
1167 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1168 compiler. It probably imposed more limitations than would be required with
|
1169 karl 1.2 the current compiler. This version of the port produces an excessively large
1170 common module due to template bloat. That problem will be fixed in a future
1171 change to the port. Also there are a log of duplicate symbol warnings generate
1172 by the AIC compiler but these cause no problems. The port has been tested
1173 with the complete unit test and client/server test successfully.
|
1174 karl 1.1
1175 --------------------------------------------------------------------------
|
1176 karl 1.2
|
1177 mike 1.4 23 May 2001
|
1178 karl 1.1
|
1179 mike 1.9 1. Ported to HPUX
|
1180 karl 1.5
|
1181 mike 1.9 --------------------------------------------------------------------------
1182
1183 29 May 2001
1184
1185 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1186 mike 1.51
1187
1188
1189
|
1190 karl 1.48
|
1191 karl 1.38
|
1192 karl 1.30
|
1193 karl 1.29
|
1194 mike 1.10
|