1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
303 in XmlReader.cpp.
304
|
305 kumpf 1.86 32. (Nag Boranna - HP) 21 March 2002 - Implemented server side Basic
306 Authentication handling code and cleaned up ATTN's in the authentication
307 releated files. Implemented a new AuthenticationInfoRep class and modified
308 the related files. Added more test cases to test the authentication classes.
309
|
310 karl 1.59 -------------------------------------------------------------------
|
311 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
312
313 1. Merged back to Main branch. All general development will be in main branch
314 in the future with releases in side branches. Special side developments
315 may temporarily be in side branches.
316 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
317 karl 1.53
318 2. (Karl) 18 December 2001 - Added new directory repositories where repository
319 implementations will be kept to separate them from the
320 repository interface defintion. Initial implementation is genericfile
321 which is the current file based repository.
322
323 Added new build variable RMREPOSITORY which is a generic MAKE command
324 to remove an existing repository. It simply substitutes for the RMDIRHIER
325 command at this point but we will make this a generic part of system
326 in the future.
|
327 karl 1.52
|
328 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
329 to check that all required parameters for intrinsic methods are
330 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
331 exception is thrown. Also added checks for duplicate parameters in the
332 intrinsic methods. If a parameter is specified more than once, a
333 CIM_ERR_INVALID_PARAMETER exception is thrown.
334
|
335 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
336 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
337 queue to this new queue. Modified CIMServer.cpp to create
338 CIMOperationRequestAuthorizer queue only when authorization is enabled.
339 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
340 it available to the CIMOperationRequestDispatcher.
341
|
342 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
343 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
344 forever. The problem was noticed when the TestClient program and CIMserver
345 service were both running. The service wasn't accessible to the TestClient
346 program.
347
|
348 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
349 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
350 in new queue, IndicationService which will get invoked from dispatcher.
351 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
352 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
353 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
354 CIM_GET_INSTANCE_REQUEST_MESSAGE
355 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
356 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
357
358 This new service will also take care of processing the indications on receiving
359 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
360 IndicationProvider or some other mechanism which is not yet clear.
361
362 IndicationService will also receive following messages from PG_ProviderRegistration
363 when a new IndicationProvider will get registered.
364 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
365 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
366
367 I had also defined new Indication Provider APIs, enableIndication, disableIndication
368 and modifyIndication with more parameters passed and eventually planning to terminate
369 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
370 plan to implement one more call as startIndication and will be done soon.
371
372 There are three new test programs in IndicationService directory, which will create
373 Filter, Indication and Subscription instances using IndicationService.
374
375 Also modified sample IndicationProvider code with the new APIs introduced.
|
376 mary 1.56
|
377 karl 1.52 -------------------------------------------------------------------------
|
378 karl 1.1
|
379 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
380 current working dev branch of build
|
381 mike 1.36
|
382 karl 1.49 ---------------------------------------------------------------------------
383 Version 1.1 - July 2001 Development branch (Work in PRogress)
384
|
385 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
386 PARAMETER.REFERENCE constructs for references).
387
388 2. (Mike Brasher) Reworked server communication into new module scheme.
|
389 mike 1.51 =======
390 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
391 seen as part of CGIclient class displays.
392
393 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
394 to the final version in Schemas\CIM25. This included minor
395 corrections, etc and a couple of file changes. This is the
396 official final CIM 25 schema relesed by the DMTF. This change
397 should not affect any current work.
398 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
399 directorys. Note however that today the make repository still
400 loads the 2.5 schema.
401
402 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
403 on XML output.
404
405 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
406 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
407 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
408 declarations in for loop initializers outside the loop, so multiple
409 "for (int i=0; i<10; i++);" statements cause a compile error.
410 mike 1.51
411 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
412 dependency on the config files at the start of the cimserver. Now the
413 cimserver will use in-memory default values in the absence of config files
414 and command line options. Fixed a few defects in the config framework that
415 were causing cimom to crash under certain conditions. Changed the config
416 provider class name to 'PG_ConfigSetting' in the mof file and modified
417 provider implementation files accordingly. Also modified the config CLI
418 to show user friendly error/status messages.
419
420 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
421 (reported incorrect line number on error in XML request if input redirected).
422 Enhanced the -d debug command line option to allow more flexibility in
423 generating debug output.
424
425 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
426 xml when it generates xml output.
427
428 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
429 a common file to reduce the number of files required by the default
430 repository implementation.
431 mike 1.51
432 10. (Mike Brasher) - Fixed minor bug in repository implementation.
433
434 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
435
436 12. (Mike Brasher) - Committed rework of server into queue approach.
437
438 13. (Mike Brasher) - New webserver and webclient examples.
439
440 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
441
442 15. (Mike Brasher) - Initial work on refactorying client into modules.
443 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
444
445 16. (Mike Brasher) - queue-based clients now complete.
446
447 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
448
449 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
450
451 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
452 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
453 a web server. See doc/Servlet for more information.
454
455 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
456 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
457 input and output can be written in a trace file.
458
459 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
460 Created new class SignalHandler that allow registration, activation and
461 deactivation of signal handler functions (Linux only !).
462
463 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
464 ExportClient to support ExportIndication. DisplayConsumer, a sample
465 consumer is added which will consume (by displaying on screen) the
466 indication exported by CIMExportRequestDispatcher. This complete
467 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
468 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
469 are modified to implement above messages.
470
471 XmlIndicationDispatcher test program is modified to test complete
472 operation. It now creates a consumer, handler and indication
473 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
474 indication to consumer. This program needs
475 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
476 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
477 in the repository to complete the test successfully. This test
478 program also needs Handler qualifier defined in repository and
479 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
480 below:
481
482 //====================================================================
483 // CIM_IndicationHandlerXMLHTTP
484 //====================================================================
485 [Description (
486 "CIM_IndicationHandlerXMLHTTP describes the destination for "
487 "Indications to be delivered via HTTP, using a cimXML "
488 "representation."), Handler ("CIMxmlIndicationHandler") ]
489
490 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
491 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
492 a provider library.
493
494 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
495 interface for the provider. InvokeMethod currently uses CIMValue as
496 type for inParameters and outParameters, which are unable to give
497 information about param name, type and value. This should be changed
498 to CIMParamValue which will help providers to know details of the
499 parameter name and type along with value passed through InvoleMethod
500 call. Current implementation uses CIMParamValue as parameters while
501 travelling through message queues and converts it back to array of
502 CIMValue before calling Provider API (which needs to be changed
503 later).
504
505 Also added are two test programs:
506
507 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
508 CIMParamValue class.
509
510 src/Pegasus/Client/tests/InvokeMethod - which makes call to
511 InvokeMethod and displays the return value. Current
512 implementation assumes that provider had returned true value
513 and outParameters (which are now hard coded in
514 CIMOperationRequestDispatcher to implement functionality)
515 mike 1.51 which are passed as response of InvokeMethod to client.
516
517 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
518 authentication to the pegasus code. Created an Authentication Manager
519 and authenticator interfaces. The file based local authentication
520 module has been modified to implement the local authenticator
521 interface, to generate the challenge for the unauthorized requests
522 and to verify the authentication.
523
524 A skeleton program has been created for the Basic Authenticator.
525 This code is in the Security/Authentication directory which is not
526 yet linked into the build.
527
528 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
529 Decoders. Earlier decoders were sending requests and responses
530 before finishing complete Xml parse. This was prone to send
531 request/response even the Xml is wrong after the MethodCall.
532 New changes collects the Message* as return value from the
533 appropriate functions while parsing the Xml and sends on
534 _outputQueue only when Xml is parsed successfully.
535
536 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
537 fix the problem with constructing provider name and loading the
538 providers for unix platforms. Also moved the shared library name
539 construction (appending .sl or .so) from
540 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
541 ProviderModule.cpp and included it in a method that returns
542 provider file path name.
543
544 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
545 Handler. This handler extracts MappingStrings qualifier from class
546 definition and converts it into SNMP specific trap data. The trap
547 structure is defined in a abstract class in snmpDeliverTrap.h file.
548 Every one has his or her own SNMP agent, which will talk with master
549 agent to deliver the trap or may have some other mechanism.
550 Extending snmpDeliverTrap class and deliverTrap method will help to
551 implement specific trap delivery mechanism.
552
553 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
554 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
555 property value to be default in the plan file, remove the property from the
556 plan file. Converted ConfigSettingProvider to use provider2 library.
557 mike 1.51
558 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
559 to allow tracing of a specific number of bytes in a given
560 string. Also modified the XmlIO trace code to use the new interface.
561 Changed the config file defaults for tracing.
562
563 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
564 NonStop platform (NSK) in directory pegasus/mak. The following files
565 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
566 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
567 program-unix.mak. The original program.mak which previously covered
568 all platforms was split into platform-specific make files, and now
569 only contains conditionals. Files config.mak, objects.mak, and
570 library.mak were changed to include the NSK files.
571 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
572
573 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
574 commas (,) in the string values of key properties.
575
576 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
577
578 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
579 pegasus/mak/program-windows.mak that prevented program builds for
580 the windows platform (related to change from 28 Oct). Replaced
581 leading whitespace in front of commands with tabs as required
582 in make files.
583
584 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
585 because getting an error in 26
586
587 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
588 whose types are references. These reference values must be
589 treated specially in the XML encoding, using the VALUE.REFERENCE
590 tag structure.
591
592 Pegasus had been passing reference values simply as String values.
593 For example, EnumerateInstanceNames returned KEYVALUEs of string
594 type rather than VALUE.REFERENCEs.
595
596 I've modified the XmlReader::getKeyBindingElement() and
597 CIMReference::instanceNameToXml() methods to read and write the
598 XML in the proper format. However, making that change required
599 mike 1.51 that a CIMReference object be able to distinguish between a key
600 of String type and a key of reference type.
601
602 I've modified the String format of CIMReferences slightly to
603 allow efficient processing of references whose keys are also of
604 reference type. The "official" form uses the same encoding for
605 key values of String type and of reference type, and so it
606 would be necessary to retrieve the class definition and look up
607 the types of the key properties to determine how to treat the
608 key values. This is clearly too inefficient for internal
609 transformations between CIMReferences and String values.
610
611 The workaround is to encode a 'R' at the beginning of the value
612 for a key of reference type (before the opening '"'). This allows
613 the parser to know a priori whether the key is of String or
614 reference type.
615
616 In this example:
617
618 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
619
620 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
621 the usual encoding. Key2 is a reference property, so the extra 'R'
622 is inserted before its encoded value. Note that this algorithm is
623 recursive, such that RefClass could include KeyC of reference type,
624 which would also get encoded with the 'R' notation.
625
626 The toString() method inserts the 'R' to provide symmetry. A new
627 KeyBinding type (REFERENCE) has been defined to denote keys in a
628 CIMReference that are of reference type. This KeyBinding type must
629 be used appropriately for CIMReference::ttoString() to behave
630 correctly.
631
632 The files that have been modified to make this change are
633 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
634
635 A result of this change is that instances names in the instance
636 repository will include this extra 'R' character. Thus, you will
637 need to repopulate your repository when you download the latest
638 CIMOM version.
639
640 Note that for user-facing uses of the String encoding of instance
641 mike 1.51 names (such as might appear in MOF for static association
642 instances or in the CGI client), this solution is non-standard and
643 therefore unacceptable. It is likely that these points will need
644 to process the more expensive operation of retrieving the class
645 definition to determine the key property types.
646
647 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
648 in case of error in setting trace components. Modified the property owner
649 init and update methods. Submitted the pegasus/mak/Buildmakefile with
650 cleanbuild, rebuild and trace configuration options.
651
652 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
653 (instanceName).
654
655 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
656 GetProperty/SetProperty/EnumerateInstances request/response messages.
657 Added encoding and decoding of PropertyList parameters on all
658 relevant intrinsic methods.
659
660 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
661 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
662 mike 1.51
663 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
664 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
665 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
666 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
667 SystemNsk.cpp) contain stubs. The associated control files
668 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
669 nsk platform links.
670
671 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
672 toString() method for CIMValues of String type. The old behavior
673 returned an XML encoding of the String with special characters
674 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
675 would be returned as a"b. The new behavior just returns the
676 String value directly with no translation. (Note that
677 CIMValue.toXml() may still be used to get the XML-encoded value.)
678
679 This change was necessary in part to correct the behavior of the
680 repository. CreateInstance stores the instance name returned by
681 CIMInstance.getInstanceName(), which is built using calls to
682 CIMValue.toString(). GetInstance searches for the instance name
683 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
684 be successful, CreateInstance must have stored the instance name
685 in that same form, without special character encoding.
686
687 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
688 the CIMValue class. Eliminated improper use of CIMValue.toString(),
689 often replacing with CIMValue.get(String&) or CIMValue.toXml().
690 Also added some error handling in the indication handlers.
691
692 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
693 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
694 to handle local instance path and local classpath. Modified the
695 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
696 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
697
698 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
699 to hold the argument to ModifyInstance and the return values
700 from EnumerateInstances. The client and provider APIs need to
701 be updated to use this class.
702
703 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
704 mike 1.51 source files. This CLI allows addition, modification, removal and listing
705 of CIM users. The CLI is not linked to the main makefile as the Provider
706 functionality is yet to be implemented. Added the function
707 String getPassword(char* prompt) to the System.h and cpp files.
708
709 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
710 the server to challenge the unauthorized requests, authenticate
711 the challenge responses, and verify the subsequent authorized requests.
712 Implemented authentication mechanism on the Client api to send
713 responses to the challenges from the server. Current implementation
714 supports only 'local' authentication mechanism.
715
716 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
717
718 - Changed the return value of EnumerateInstances from Array<CIMInstance>
719 to Array<CIMNamedInstance>
720 - Changed the parameter to ModifyInstance from CIMInstance to
721 CIMNamedInstance
722 - Added an optional PropertyList parameter to ModifyInstance
723 - Changed all handling of PropertyList parameters to use the
724 CIMPropertyList class instead of Array<String>
725 mike 1.51
726 Each of these changes was required to comply with the DMTF specification.
727
728 These changes were made throughout the system except for in the provider
729 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
730 differences from providers, so older providers will continue to function.
731 However, this means that clients can not yet take advantage of the added
732 functionality.
733
734 When the provider API is updated, the following changes will be visible:
735
736 - Providers will get a PropertyList parameter to ModifyInstance which
737 they are required to respect. Providers that can not process the
738 PropertyList must throw a NOT_SUPPORTED exception whenever the
739 list is not null. Clients can take advantage of this change by
740 issuing a ModifyInstance request against a selected set of
741 properties in an instance, rather than being required to replace
742 the entire instance.
743
744 - Providers will be required to return instance names along with
745 instances in the EnumerateInstances method. Clients will receive
746 mike 1.51 these instance names, as the standard dictates.
747
748 - Providers will receive a CIMPropertyList argument containing the
749 PropertyList instead of an Array<String>. This change allows
750 providers to distinguish between an empty list and a null list.
751
752 Note that the repository also does not yet handle the PropertyList in
753 ModifyInstance correctly.
754
755 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
756 provider API to match the changes made to the EnumerateInstances and
757 ModifyInstance operations. These changes were made to comply with
758 the DMTF specification.
759
760 The original Provider API has not been updated, and I have no
761 plans to do so. Providers written to the original API will
762 continue to function, but they will not have the opportunity
763 to take advantage of the features that have been added.
764
765 The significant changes to the Provider2 API are:
766
767 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
768 they are required to respect. Providers that can not process the
769 PropertyList must throw a NOT_SUPPORTED exception whenever the
770 list is not null. Clients can take advantage of this change by
771 issuing a ModifyInstance request against a selected set of
772 properties in an instance, rather than being required to replace
773 the entire instance.
774
775 - Providers will get an IncludeQualifiers parameter to ModifyInstance
776 which they are required to respect. If IncludeQualifiers is
777 false, the qualifiers on the modified instance provided must not
778 be used to update the instance.
779
780 - Providers will be required to return instance names along with
781 instances in the EnumerateInstances method. Clients will receive
782 these instance names, as the standard dictates.
783
784 The providers that are in the Pegasus build have all been updated.
785 However, whenever the PropertyList is not null, the providers throw
786 a NOT_SUPPORTED exception.
787
788 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
789 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
790 the Common module. File Config.h was modified to include the NSK
791 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
792 without the standard (std) namespace.
793
794 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
795 properties to support alternate behavior of the Pegasus repository:
796 repositoryIsDefaultInstanceProvider and repositoryProviderName.
797
798 Using the first one, the repository can be enabled/disabled as the
799 default provider for instance (and association) operations. The default
800 setting is "true", so the default behavior has not been changed. To
801 disable the repository as the default instance provider, issue the
802 following command before starting cimserver:
803
804 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
805
806 The repositoryProviderName configuration property specifies what
807 provider name is used to explicitly register the repository as a
808 provider. This is necessary when the repository needs to serve
809 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
810 to "false". The default value is "repository". To register the
811 repository as an instance provider for a class, add a
812 'Provider("repository")' qualifier to the class definition.
813
814 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
815 pass to providers that act as services. This handle provides
816 service providers with access to the CIMServer data structures.
817
818 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
819 the repository so that it respects the IncludeQualifiers and
820 PropertyList parameters. Updated SetProperty in the repository
821 so that it uses ModifyInstance correctly. The repository now
822 supports GetProperty and SetProperty in addition to ModifyInstance.
823
824 Implemented GetProperty and SetProperty in the Dispatcher and
825 Provider2 so that they get translated to GetInstance and
826 ModifyInstance calls (respectively) in the provider. Providers
827 written to the Provider2 API that correctly process the new
828 ModifyInstance parameters will automatically support SetProperty
829 operations. Note that GetProperty and SetProperty currently only
830 mike 1.51 work for String properties because of an XML encoding limitation.
831
832 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
833 Security components for authentication and authorization.
834
835 Authentication and User Management:
836 cimuser CLI : This CLI is used for addition, modification, removal
837 and listing of CIM Users. The CIM user password is encrypted and stored
838 in a file. The password file format is compatible with Apache's htpasswd
839 generated password file.
840
841 cimauth CLI implement the authorization managment functionality by letting
842 to add/remove/list user authorizations.
843
844 User Manager and User Manager Provider components implement the user
845 management and authorization functionality.
846
847 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
848 under src/Pegasus/WQL which contains library and BNF.
849
850 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
851 mike 1.51 which does provider registration, block, unblock, and stop a provider.
852 It also alert Subscription Service of any provider registration changes.
853
854 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
855 and String.cpp with PEG_min. The _min macro caused problems on the
856 NSK platform because of a duplicate definition in a standard file.
857
858 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
859 subscription service provider that serves as the instance provider for the
860 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
861 classes (from CIM_Events27.mof). The service also takes appropriate action
862 in response to startup, shutdown of the cimom, termination of a provider,
863 or change in provider registration.
864
865 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
866 and the command line interface for shutting down cimom gracefully.
867 For more information, refer to the CIMOM Shutdown working paper
868 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
869
870 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
871 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
872 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
873 constructor to set a pointer to the server-, resp. client wide SSL_Context
874 structure. The Socket field in HTTPConnection is substituted with an
875 MP_Socket pointer, a class that is designed to hide the differences
876 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
877 is defined even in a non-ssl environment.
878 How to use it in a Server or Client:
879 1. Just create an SSL_Context once per Server/Client address space
880 2. Construct every HTTPConnector/Acceptor with a pointer to this
881 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
882 without SSL_Context for conventional connections.
|
883 mike 1.50
|
884 mike 1.51 The Configuration data was extended with the boolean SSL property, and
885 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
886
887 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
888 kumpf 1.61
|
889 mike 1.51 ---------------------------------------------------------------------------
890 Version 1.1 - July 2001 Development branch
891 Tagged as version_1_01 on 3 August 2001 (sorry should have been
892 1.1
893
894 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
895 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
896 and ExportClient classes. the indication.
897
898 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
899 make the delivery of indications over Xml-HTTP and email respectively.
900
901 Provided examples for HandlerTable, XmlIndicationDelivery and
902 SendMailIndicationDelivery to support this implementation.
903
904 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
905 library and a thread-safe message queue (first stage). Classes defined
906 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
907 and SimpleThread.
908
909 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
910 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
911 information on using wbemexec. A simple test script is included. Please
912 see pegasus/src/Clients/wbemexec/tests/readme for information on running
913 the test script.
914
915 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
916 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
917 and
918 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
919 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
920 src/Pegasus/Common/TraceFileHandler.cpp.
921
922 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
923 Config CLI. Please refer to the documentation
924 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
925 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
926 using the config framework and cimconfig CLI. Make sure to load the config
927 mof (src/gmake config) before starting the cimserver. A simple test script
928 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
929 information on running the test script.
930
931 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
932 (changed the H and CPP files for the major CIM objects. These
933 functions generate CIM MOF output for the objects.
934
935 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
936 Authentication provides security mechanism to authenticates CIM clients
937 that
938 connect to CIM Server on the same system without having to specify a
939 password.
940 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
941 This component only works on unix and it's not linked in with the main
942 build.
943 When authentication framework is defined this component may need to be
944 modified to integrate with the framework.
|
945 karl 1.49
946 ---------------------------------------------------------------------------
947 Version 0.99.x (Fixes to version 0.99) in Process
|
948 mike 1.51
|
949 karl 1.49 NOTE: Please do not input anything to this branch except for critical
950 fixes. This is, in effect, 1.0 and we do not want to use it for
951 development.
952
953 ----------------------------------------------------------------------------
954
955 Version 0.98.0 - Work in progress (This number skipped)
|
956 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
957 mike 1.36
|
958 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
959 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
960
|
961 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
962 in the HTML URL reference for passing instance names.
963
|
964 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
965
966 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
967
|
968 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
969 allow slp to compile.
970
|
971 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
972
973 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
974 ids to queue pointers).
975
|
976 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
977 and Dispatcher.
978
|
979 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
980 and
981 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
982 chip 1.44 ResponseHandler for Provider2 interface.
|
983 mike 1.45
984 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
985
986 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
987
|
988 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
989
|
990 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
991
992 12. (Mike Brasher) - Fixed compiler error on Linux.
993
|
994 karl 1.38 ------------------------------------------------------------------------------
995 --
|
996 mike 1.26
|
997 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
998 karl 1.16
999 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
1000 for NT and Linux platforms.
|
1001 mike 1.26
|
1002 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
1003 5988.
1004 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1005 the DMTF.
|
1006 mike 1.26
|
1007 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1008 Fusion event. THis included a) extended the test for end of HTTP header from
1009 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1010 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1011 mike 1.26
|
1012 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1013 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1014 revamping the compiler to work independently of the repository (grb).
|
1015 mike 1.26
|
1016 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1017 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1018 Now when you build normally, you will get the committed grammar and parser
1019 files instead of generating your own for a particular platform. This should
1020 prevent back-level lex and yacc implementations from generating troublesome
1021 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1022 bob 1.20 (grb)
|
1023 mike 1.26
|
1024 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1025 This change paves the way for upcoming changes that will allow the compiler
1026 to work indepently of the repository. (grb)
|
1027 mike 1.26
|
1028 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1029 mike 1.26
|
1030 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1031 modifyClass,
|
1032 chip 1.22 createClass to protect caller's object.
|
1033 mike 1.26
|
1034 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1035 directory. These
1036 interfaces allow very smart providers to perform advances operations.
1037 CIMProviderStub has
|
1038 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1039 mike 1.26
|
1040 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1041 mike 1.26
|
1042 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1043 repository you make world, make rebuild or make repository. ks
|
1044 mike 1.26
1045 12. Added associators() and associatorNames() operations to CIM repository.
|
1046 mike 1.27 (MEB)
1047
1048 13. More on association implementation (all four operations supported).
1049 Need to handle deletion of associations and protocol stubs still.
1050 Need to test class associations (rather than just instance associations).
1051 Need to handle deleteInstance().
1052 (MEB)
|
1053 mike 1.26
|
1054 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1055
|
1056 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1057 AssociationName
|
1058 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1059 pages.
1060
|
1061 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1062 sage 1.31
1063 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1064 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1065 Made cimserver accept the -D flag to eliminate the need for environment
1066 variables.
|
1067 mike 1.32
1068 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1069 References() and ReferenceNames() CIM operations. These only operate
1070 on instances at this time. They will operate on classes soon.
|
1071 kumpf 1.34
1072 19. (Mike Glantz) Extended and modified dynamic support
1073 changes to (1) work on HP-UX and (2) have all images and libraries
1074 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1075 change is to program.mak and library-unix.mak, removing specific
1076 lists of dynamic library specs and putting them in the Makefile
1077 and libraries.mak files that build the actual targets (lots of
1078 these now have DYNAMIC_LIBRARIES defined).
|
1079 karl 1.35
1080 20. (Karl) added basic Queue function to common (based on array) and added
1081 tests for stack and queue.
|
1082 karl 1.38
1083 ------------------------------------------------------------------------------
1084 --
|
1085 mike 1.36
|
1086 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1087 karl 1.11
|
1088 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1089 CIMServer (both)
|
1090 karl 1.11 Functions added include:
1091 a. Enable trace to log file.
|
1092 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1093 is
|
1094 karl 1.11 trace to log, -t is trace to console).
1095 c. add parameter in optionsrow for help message and enable the capture
|
1096 karl 1.12 of these messages in Options class. Also added help print that
1097 prints these things out. However, format not to beautiful.
|
1098 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1099 e. Extend the Clients\testclient so he does tests on Namespace.
|
1100 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1101 mike 1.33
|
1102 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1103 mike 1.33
|
1104 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1105 logs
|
1106 karl 1.12 are put
|
1107 mike 1.33
|
1108 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1109 This is a preliminary version.
|
1110 mike 1.33
|
1111 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1112 karl 1.13 throws CannotBind exception.
|
1113 mike 1.33
|
1114 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1115 not
|
1116 karl 1.14 print out all of the message. At the least it prints out the error message
1117 and components of the message causing the problem.
|
1118 mike 1.33
|
1119 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1120 mike 1.33
|
1121 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1122 karl 1.14 existed.
|
1123 mike 1.33
1124 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1125 karl 1.15
|
1126 karl 1.29 ------------------------------------------------------------------------------
1127 --
|
1128 karl 1.6 Version 0.97.2
1129
1130 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1131 2. Extend Formatter for Boolean and Uint32 types.
1132 3. Change CIM Server to use Trace (-t) flag. This also changed
1133 Handler.h to work off of flag.
1134 4. Minor corrections to __Namespace Provider.
1135 5. Extend tests for Formatter, String, and other modules.
1136 6. Correct errors in documentation.
1137 7. New working papers (provider interface).
|
1138 karl 1.8 8. Add Providerreg.exe tool.
1139 9. Add trace output for messages sent from the Server.
|
1140 mike 1.26
|
1141 karl 1.29 ------------------------------------------------------------------------------
1142 --
|
1143 mike 1.26
|
1144 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1145 karl 1.5
|
1146 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1147 find functions. Note: This symbol is defined in config.h. (ks).
1148
|
1149 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1150 of dynamic lib loaading.
|
1151 karl 1.1
1152
|
1153 karl 1.29 ------------------------------------------------------------------------------
1154 --
|
1155 mike 1.26
|
1156 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1157 karl 1.1
1158 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1159 qualifiers, methods.
1160 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1161 methods.
1162 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1163 qualifiers and to
1164 remove qualifiers.
1165 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1166 compiler. It probably imposed more limitations than would be required with
|
1167 karl 1.2 the current compiler. This version of the port produces an excessively large
1168 common module due to template bloat. That problem will be fixed in a future
1169 change to the port. Also there are a log of duplicate symbol warnings generate
1170 by the AIC compiler but these cause no problems. The port has been tested
1171 with the complete unit test and client/server test successfully.
|
1172 karl 1.1
1173 --------------------------------------------------------------------------
|
1174 karl 1.2
|
1175 mike 1.4 23 May 2001
|
1176 karl 1.1
|
1177 mike 1.9 1. Ported to HPUX
|
1178 karl 1.5
|
1179 mike 1.9 --------------------------------------------------------------------------
1180
1181 29 May 2001
1182
1183 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1184 mike 1.51
1185
1186
1187
|
1188 karl 1.48
|
1189 karl 1.38
|
1190 karl 1.30
|
1191 karl 1.29
|
1192 mike 1.10
|