1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 kumpf 1.85 31. (Roger Kumpf - HP) 20 Mar 2002 - Added support for hexadecimal integers
303 in XmlReader.cpp.
304
|
305 karl 1.59 -------------------------------------------------------------------
|
306 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
307
308 1. Merged back to Main branch. All general development will be in main branch
309 in the future with releases in side branches. Special side developments
310 may temporarily be in side branches.
311 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
312 karl 1.53
313 2. (Karl) 18 December 2001 - Added new directory repositories where repository
314 implementations will be kept to separate them from the
315 repository interface defintion. Initial implementation is genericfile
316 which is the current file based repository.
317
318 Added new build variable RMREPOSITORY which is a generic MAKE command
319 to remove an existing repository. It simply substitutes for the RMDIRHIER
320 command at this point but we will make this a generic part of system
321 in the future.
|
322 karl 1.52
|
323 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
324 to check that all required parameters for intrinsic methods are
325 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
326 exception is thrown. Also added checks for duplicate parameters in the
327 intrinsic methods. If a parameter is specified more than once, a
328 CIM_ERR_INVALID_PARAMETER exception is thrown.
329
|
330 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
331 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
332 queue to this new queue. Modified CIMServer.cpp to create
333 CIMOperationRequestAuthorizer queue only when authorization is enabled.
334 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
335 it available to the CIMOperationRequestDispatcher.
336
|
337 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
338 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
339 forever. The problem was noticed when the TestClient program and CIMserver
340 service were both running. The service wasn't accessible to the TestClient
341 program.
342
|
343 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
344 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
345 in new queue, IndicationService which will get invoked from dispatcher.
346 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
347 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
348 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
349 CIM_GET_INSTANCE_REQUEST_MESSAGE
350 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
351 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
352
353 This new service will also take care of processing the indications on receiving
354 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
355 IndicationProvider or some other mechanism which is not yet clear.
356
357 IndicationService will also receive following messages from PG_ProviderRegistration
358 when a new IndicationProvider will get registered.
359 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
360 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
361
362 I had also defined new Indication Provider APIs, enableIndication, disableIndication
363 and modifyIndication with more parameters passed and eventually planning to terminate
364 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
365 plan to implement one more call as startIndication and will be done soon.
366
367 There are three new test programs in IndicationService directory, which will create
368 Filter, Indication and Subscription instances using IndicationService.
369
370 Also modified sample IndicationProvider code with the new APIs introduced.
|
371 mary 1.56
|
372 karl 1.52 -------------------------------------------------------------------------
|
373 karl 1.1
|
374 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
375 current working dev branch of build
|
376 mike 1.36
|
377 karl 1.49 ---------------------------------------------------------------------------
378 Version 1.1 - July 2001 Development branch (Work in PRogress)
379
|
380 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
381 PARAMETER.REFERENCE constructs for references).
382
383 2. (Mike Brasher) Reworked server communication into new module scheme.
|
384 mike 1.51 =======
385 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
386 seen as part of CGIclient class displays.
387
388 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
389 to the final version in Schemas\CIM25. This included minor
390 corrections, etc and a couple of file changes. This is the
391 official final CIM 25 schema relesed by the DMTF. This change
392 should not affect any current work.
393 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
394 directorys. Note however that today the make repository still
395 loads the 2.5 schema.
396
397 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
398 on XML output.
399
400 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
401 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
402 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
403 declarations in for loop initializers outside the loop, so multiple
404 "for (int i=0; i<10; i++);" statements cause a compile error.
405 mike 1.51
406 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
407 dependency on the config files at the start of the cimserver. Now the
408 cimserver will use in-memory default values in the absence of config files
409 and command line options. Fixed a few defects in the config framework that
410 were causing cimom to crash under certain conditions. Changed the config
411 provider class name to 'PG_ConfigSetting' in the mof file and modified
412 provider implementation files accordingly. Also modified the config CLI
413 to show user friendly error/status messages.
414
415 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
416 (reported incorrect line number on error in XML request if input redirected).
417 Enhanced the -d debug command line option to allow more flexibility in
418 generating debug output.
419
420 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
421 xml when it generates xml output.
422
423 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
424 a common file to reduce the number of files required by the default
425 repository implementation.
426 mike 1.51
427 10. (Mike Brasher) - Fixed minor bug in repository implementation.
428
429 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
430
431 12. (Mike Brasher) - Committed rework of server into queue approach.
432
433 13. (Mike Brasher) - New webserver and webclient examples.
434
435 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
436
437 15. (Mike Brasher) - Initial work on refactorying client into modules.
438 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
439
440 16. (Mike Brasher) - queue-based clients now complete.
441
442 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
443
444 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
445
446 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
447 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
448 a web server. See doc/Servlet for more information.
449
450 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
451 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
452 input and output can be written in a trace file.
453
454 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
455 Created new class SignalHandler that allow registration, activation and
456 deactivation of signal handler functions (Linux only !).
457
458 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
459 ExportClient to support ExportIndication. DisplayConsumer, a sample
460 consumer is added which will consume (by displaying on screen) the
461 indication exported by CIMExportRequestDispatcher. This complete
462 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
463 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
464 are modified to implement above messages.
465
466 XmlIndicationDispatcher test program is modified to test complete
467 operation. It now creates a consumer, handler and indication
468 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
469 indication to consumer. This program needs
470 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
471 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
472 in the repository to complete the test successfully. This test
473 program also needs Handler qualifier defined in repository and
474 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
475 below:
476
477 //====================================================================
478 // CIM_IndicationHandlerXMLHTTP
479 //====================================================================
480 [Description (
481 "CIM_IndicationHandlerXMLHTTP describes the destination for "
482 "Indications to be delivered via HTTP, using a cimXML "
483 "representation."), Handler ("CIMxmlIndicationHandler") ]
484
485 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
486 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
487 a provider library.
488
489 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
490 interface for the provider. InvokeMethod currently uses CIMValue as
491 type for inParameters and outParameters, which are unable to give
492 information about param name, type and value. This should be changed
493 to CIMParamValue which will help providers to know details of the
494 parameter name and type along with value passed through InvoleMethod
495 call. Current implementation uses CIMParamValue as parameters while
496 travelling through message queues and converts it back to array of
497 CIMValue before calling Provider API (which needs to be changed
498 later).
499
500 Also added are two test programs:
501
502 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
503 CIMParamValue class.
504
505 src/Pegasus/Client/tests/InvokeMethod - which makes call to
506 InvokeMethod and displays the return value. Current
507 implementation assumes that provider had returned true value
508 and outParameters (which are now hard coded in
509 CIMOperationRequestDispatcher to implement functionality)
510 mike 1.51 which are passed as response of InvokeMethod to client.
511
512 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
513 authentication to the pegasus code. Created an Authentication Manager
514 and authenticator interfaces. The file based local authentication
515 module has been modified to implement the local authenticator
516 interface, to generate the challenge for the unauthorized requests
517 and to verify the authentication.
518
519 A skeleton program has been created for the Basic Authenticator.
520 This code is in the Security/Authentication directory which is not
521 yet linked into the build.
522
523 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
524 Decoders. Earlier decoders were sending requests and responses
525 before finishing complete Xml parse. This was prone to send
526 request/response even the Xml is wrong after the MethodCall.
527 New changes collects the Message* as return value from the
528 appropriate functions while parsing the Xml and sends on
529 _outputQueue only when Xml is parsed successfully.
530
531 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
532 fix the problem with constructing provider name and loading the
533 providers for unix platforms. Also moved the shared library name
534 construction (appending .sl or .so) from
535 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
536 ProviderModule.cpp and included it in a method that returns
537 provider file path name.
538
539 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
540 Handler. This handler extracts MappingStrings qualifier from class
541 definition and converts it into SNMP specific trap data. The trap
542 structure is defined in a abstract class in snmpDeliverTrap.h file.
543 Every one has his or her own SNMP agent, which will talk with master
544 agent to deliver the trap or may have some other mechanism.
545 Extending snmpDeliverTrap class and deliverTrap method will help to
546 implement specific trap delivery mechanism.
547
548 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
549 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
550 property value to be default in the plan file, remove the property from the
551 plan file. Converted ConfigSettingProvider to use provider2 library.
552 mike 1.51
553 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
554 to allow tracing of a specific number of bytes in a given
555 string. Also modified the XmlIO trace code to use the new interface.
556 Changed the config file defaults for tracing.
557
558 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
559 NonStop platform (NSK) in directory pegasus/mak. The following files
560 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
561 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
562 program-unix.mak. The original program.mak which previously covered
563 all platforms was split into platform-specific make files, and now
564 only contains conditionals. Files config.mak, objects.mak, and
565 library.mak were changed to include the NSK files.
566 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
567
568 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
569 commas (,) in the string values of key properties.
570
571 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
572
573 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
574 pegasus/mak/program-windows.mak that prevented program builds for
575 the windows platform (related to change from 28 Oct). Replaced
576 leading whitespace in front of commands with tabs as required
577 in make files.
578
579 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
580 because getting an error in 26
581
582 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
583 whose types are references. These reference values must be
584 treated specially in the XML encoding, using the VALUE.REFERENCE
585 tag structure.
586
587 Pegasus had been passing reference values simply as String values.
588 For example, EnumerateInstanceNames returned KEYVALUEs of string
589 type rather than VALUE.REFERENCEs.
590
591 I've modified the XmlReader::getKeyBindingElement() and
592 CIMReference::instanceNameToXml() methods to read and write the
593 XML in the proper format. However, making that change required
594 mike 1.51 that a CIMReference object be able to distinguish between a key
595 of String type and a key of reference type.
596
597 I've modified the String format of CIMReferences slightly to
598 allow efficient processing of references whose keys are also of
599 reference type. The "official" form uses the same encoding for
600 key values of String type and of reference type, and so it
601 would be necessary to retrieve the class definition and look up
602 the types of the key properties to determine how to treat the
603 key values. This is clearly too inefficient for internal
604 transformations between CIMReferences and String values.
605
606 The workaround is to encode a 'R' at the beginning of the value
607 for a key of reference type (before the opening '"'). This allows
608 the parser to know a priori whether the key is of String or
609 reference type.
610
611 In this example:
612
613 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
614
615 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
616 the usual encoding. Key2 is a reference property, so the extra 'R'
617 is inserted before its encoded value. Note that this algorithm is
618 recursive, such that RefClass could include KeyC of reference type,
619 which would also get encoded with the 'R' notation.
620
621 The toString() method inserts the 'R' to provide symmetry. A new
622 KeyBinding type (REFERENCE) has been defined to denote keys in a
623 CIMReference that are of reference type. This KeyBinding type must
624 be used appropriately for CIMReference::ttoString() to behave
625 correctly.
626
627 The files that have been modified to make this change are
628 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
629
630 A result of this change is that instances names in the instance
631 repository will include this extra 'R' character. Thus, you will
632 need to repopulate your repository when you download the latest
633 CIMOM version.
634
635 Note that for user-facing uses of the String encoding of instance
636 mike 1.51 names (such as might appear in MOF for static association
637 instances or in the CGI client), this solution is non-standard and
638 therefore unacceptable. It is likely that these points will need
639 to process the more expensive operation of retrieving the class
640 definition to determine the key property types.
641
642 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
643 in case of error in setting trace components. Modified the property owner
644 init and update methods. Submitted the pegasus/mak/Buildmakefile with
645 cleanbuild, rebuild and trace configuration options.
646
647 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
648 (instanceName).
649
650 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
651 GetProperty/SetProperty/EnumerateInstances request/response messages.
652 Added encoding and decoding of PropertyList parameters on all
653 relevant intrinsic methods.
654
655 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
656 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
657 mike 1.51
658 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
659 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
660 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
661 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
662 SystemNsk.cpp) contain stubs. The associated control files
663 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
664 nsk platform links.
665
666 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
667 toString() method for CIMValues of String type. The old behavior
668 returned an XML encoding of the String with special characters
669 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
670 would be returned as a"b. The new behavior just returns the
671 String value directly with no translation. (Note that
672 CIMValue.toXml() may still be used to get the XML-encoded value.)
673
674 This change was necessary in part to correct the behavior of the
675 repository. CreateInstance stores the instance name returned by
676 CIMInstance.getInstanceName(), which is built using calls to
677 CIMValue.toString(). GetInstance searches for the instance name
678 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
679 be successful, CreateInstance must have stored the instance name
680 in that same form, without special character encoding.
681
682 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
683 the CIMValue class. Eliminated improper use of CIMValue.toString(),
684 often replacing with CIMValue.get(String&) or CIMValue.toXml().
685 Also added some error handling in the indication handlers.
686
687 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
688 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
689 to handle local instance path and local classpath. Modified the
690 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
691 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
692
693 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
694 to hold the argument to ModifyInstance and the return values
695 from EnumerateInstances. The client and provider APIs need to
696 be updated to use this class.
697
698 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
699 mike 1.51 source files. This CLI allows addition, modification, removal and listing
700 of CIM users. The CLI is not linked to the main makefile as the Provider
701 functionality is yet to be implemented. Added the function
702 String getPassword(char* prompt) to the System.h and cpp files.
703
704 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
705 the server to challenge the unauthorized requests, authenticate
706 the challenge responses, and verify the subsequent authorized requests.
707 Implemented authentication mechanism on the Client api to send
708 responses to the challenges from the server. Current implementation
709 supports only 'local' authentication mechanism.
710
711 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
712
713 - Changed the return value of EnumerateInstances from Array<CIMInstance>
714 to Array<CIMNamedInstance>
715 - Changed the parameter to ModifyInstance from CIMInstance to
716 CIMNamedInstance
717 - Added an optional PropertyList parameter to ModifyInstance
718 - Changed all handling of PropertyList parameters to use the
719 CIMPropertyList class instead of Array<String>
720 mike 1.51
721 Each of these changes was required to comply with the DMTF specification.
722
723 These changes were made throughout the system except for in the provider
724 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
725 differences from providers, so older providers will continue to function.
726 However, this means that clients can not yet take advantage of the added
727 functionality.
728
729 When the provider API is updated, the following changes will be visible:
730
731 - Providers will get a PropertyList parameter to ModifyInstance which
732 they are required to respect. Providers that can not process the
733 PropertyList must throw a NOT_SUPPORTED exception whenever the
734 list is not null. Clients can take advantage of this change by
735 issuing a ModifyInstance request against a selected set of
736 properties in an instance, rather than being required to replace
737 the entire instance.
738
739 - Providers will be required to return instance names along with
740 instances in the EnumerateInstances method. Clients will receive
741 mike 1.51 these instance names, as the standard dictates.
742
743 - Providers will receive a CIMPropertyList argument containing the
744 PropertyList instead of an Array<String>. This change allows
745 providers to distinguish between an empty list and a null list.
746
747 Note that the repository also does not yet handle the PropertyList in
748 ModifyInstance correctly.
749
750 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
751 provider API to match the changes made to the EnumerateInstances and
752 ModifyInstance operations. These changes were made to comply with
753 the DMTF specification.
754
755 The original Provider API has not been updated, and I have no
756 plans to do so. Providers written to the original API will
757 continue to function, but they will not have the opportunity
758 to take advantage of the features that have been added.
759
760 The significant changes to the Provider2 API are:
761
762 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
763 they are required to respect. Providers that can not process the
764 PropertyList must throw a NOT_SUPPORTED exception whenever the
765 list is not null. Clients can take advantage of this change by
766 issuing a ModifyInstance request against a selected set of
767 properties in an instance, rather than being required to replace
768 the entire instance.
769
770 - Providers will get an IncludeQualifiers parameter to ModifyInstance
771 which they are required to respect. If IncludeQualifiers is
772 false, the qualifiers on the modified instance provided must not
773 be used to update the instance.
774
775 - Providers will be required to return instance names along with
776 instances in the EnumerateInstances method. Clients will receive
777 these instance names, as the standard dictates.
778
779 The providers that are in the Pegasus build have all been updated.
780 However, whenever the PropertyList is not null, the providers throw
781 a NOT_SUPPORTED exception.
782
783 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
784 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
785 the Common module. File Config.h was modified to include the NSK
786 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
787 without the standard (std) namespace.
788
789 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
790 properties to support alternate behavior of the Pegasus repository:
791 repositoryIsDefaultInstanceProvider and repositoryProviderName.
792
793 Using the first one, the repository can be enabled/disabled as the
794 default provider for instance (and association) operations. The default
795 setting is "true", so the default behavior has not been changed. To
796 disable the repository as the default instance provider, issue the
797 following command before starting cimserver:
798
799 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
800
801 The repositoryProviderName configuration property specifies what
802 provider name is used to explicitly register the repository as a
803 provider. This is necessary when the repository needs to serve
804 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
805 to "false". The default value is "repository". To register the
806 repository as an instance provider for a class, add a
807 'Provider("repository")' qualifier to the class definition.
808
809 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
810 pass to providers that act as services. This handle provides
811 service providers with access to the CIMServer data structures.
812
813 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
814 the repository so that it respects the IncludeQualifiers and
815 PropertyList parameters. Updated SetProperty in the repository
816 so that it uses ModifyInstance correctly. The repository now
817 supports GetProperty and SetProperty in addition to ModifyInstance.
818
819 Implemented GetProperty and SetProperty in the Dispatcher and
820 Provider2 so that they get translated to GetInstance and
821 ModifyInstance calls (respectively) in the provider. Providers
822 written to the Provider2 API that correctly process the new
823 ModifyInstance parameters will automatically support SetProperty
824 operations. Note that GetProperty and SetProperty currently only
825 mike 1.51 work for String properties because of an XML encoding limitation.
826
827 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
828 Security components for authentication and authorization.
829
830 Authentication and User Management:
831 cimuser CLI : This CLI is used for addition, modification, removal
832 and listing of CIM Users. The CIM user password is encrypted and stored
833 in a file. The password file format is compatible with Apache's htpasswd
834 generated password file.
835
836 cimauth CLI implement the authorization managment functionality by letting
837 to add/remove/list user authorizations.
838
839 User Manager and User Manager Provider components implement the user
840 management and authorization functionality.
841
842 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
843 under src/Pegasus/WQL which contains library and BNF.
844
845 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
846 mike 1.51 which does provider registration, block, unblock, and stop a provider.
847 It also alert Subscription Service of any provider registration changes.
848
849 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
850 and String.cpp with PEG_min. The _min macro caused problems on the
851 NSK platform because of a duplicate definition in a standard file.
852
853 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
854 subscription service provider that serves as the instance provider for the
855 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
856 classes (from CIM_Events27.mof). The service also takes appropriate action
857 in response to startup, shutdown of the cimom, termination of a provider,
858 or change in provider registration.
859
860 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
861 and the command line interface for shutting down cimom gracefully.
862 For more information, refer to the CIMOM Shutdown working paper
863 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
864
865 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
866 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
867 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
868 constructor to set a pointer to the server-, resp. client wide SSL_Context
869 structure. The Socket field in HTTPConnection is substituted with an
870 MP_Socket pointer, a class that is designed to hide the differences
871 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
872 is defined even in a non-ssl environment.
873 How to use it in a Server or Client:
874 1. Just create an SSL_Context once per Server/Client address space
875 2. Construct every HTTPConnector/Acceptor with a pointer to this
876 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
877 without SSL_Context for conventional connections.
|
878 mike 1.50
|
879 mike 1.51 The Configuration data was extended with the boolean SSL property, and
880 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
881
882 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
883 kumpf 1.61
|
884 mike 1.51 ---------------------------------------------------------------------------
885 Version 1.1 - July 2001 Development branch
886 Tagged as version_1_01 on 3 August 2001 (sorry should have been
887 1.1
888
889 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
890 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
891 and ExportClient classes. the indication.
892
893 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
894 make the delivery of indications over Xml-HTTP and email respectively.
895
896 Provided examples for HandlerTable, XmlIndicationDelivery and
897 SendMailIndicationDelivery to support this implementation.
898
899 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
900 library and a thread-safe message queue (first stage). Classes defined
901 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
902 and SimpleThread.
903
904 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
905 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
906 information on using wbemexec. A simple test script is included. Please
907 see pegasus/src/Clients/wbemexec/tests/readme for information on running
908 the test script.
909
910 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
911 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
912 and
913 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
914 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
915 src/Pegasus/Common/TraceFileHandler.cpp.
916
917 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
918 Config CLI. Please refer to the documentation
919 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
920 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
921 using the config framework and cimconfig CLI. Make sure to load the config
922 mof (src/gmake config) before starting the cimserver. A simple test script
923 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
924 information on running the test script.
925
926 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
927 (changed the H and CPP files for the major CIM objects. These
928 functions generate CIM MOF output for the objects.
929
930 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
931 Authentication provides security mechanism to authenticates CIM clients
932 that
933 connect to CIM Server on the same system without having to specify a
934 password.
935 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
936 This component only works on unix and it's not linked in with the main
937 build.
938 When authentication framework is defined this component may need to be
939 modified to integrate with the framework.
|
940 karl 1.49
941 ---------------------------------------------------------------------------
942 Version 0.99.x (Fixes to version 0.99) in Process
|
943 mike 1.51
|
944 karl 1.49 NOTE: Please do not input anything to this branch except for critical
945 fixes. This is, in effect, 1.0 and we do not want to use it for
946 development.
947
948 ----------------------------------------------------------------------------
949
950 Version 0.98.0 - Work in progress (This number skipped)
|
951 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
952 mike 1.36
|
953 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
954 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
955
|
956 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
957 in the HTML URL reference for passing instance names.
958
|
959 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
960
961 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
962
|
963 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
964 allow slp to compile.
965
|
966 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
967
968 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
969 ids to queue pointers).
970
|
971 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
972 and Dispatcher.
973
|
974 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
975 and
976 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
977 chip 1.44 ResponseHandler for Provider2 interface.
|
978 mike 1.45
979 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
980
981 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
982
|
983 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
984
|
985 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
986
987 12. (Mike Brasher) - Fixed compiler error on Linux.
988
|
989 karl 1.38 ------------------------------------------------------------------------------
990 --
|
991 mike 1.26
|
992 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
993 karl 1.16
994 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
995 for NT and Linux platforms.
|
996 mike 1.26
|
997 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
998 5988.
999 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
1000 the DMTF.
|
1001 mike 1.26
|
1002 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1003 Fusion event. THis included a) extended the test for end of HTTP header from
1004 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1005 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1006 mike 1.26
|
1007 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1008 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1009 revamping the compiler to work independently of the repository (grb).
|
1010 mike 1.26
|
1011 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1012 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1013 Now when you build normally, you will get the committed grammar and parser
1014 files instead of generating your own for a particular platform. This should
1015 prevent back-level lex and yacc implementations from generating troublesome
1016 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1017 bob 1.20 (grb)
|
1018 mike 1.26
|
1019 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1020 This change paves the way for upcoming changes that will allow the compiler
1021 to work indepently of the repository. (grb)
|
1022 mike 1.26
|
1023 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1024 mike 1.26
|
1025 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1026 modifyClass,
|
1027 chip 1.22 createClass to protect caller's object.
|
1028 mike 1.26
|
1029 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1030 directory. These
1031 interfaces allow very smart providers to perform advances operations.
1032 CIMProviderStub has
|
1033 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1034 mike 1.26
|
1035 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1036 mike 1.26
|
1037 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1038 repository you make world, make rebuild or make repository. ks
|
1039 mike 1.26
1040 12. Added associators() and associatorNames() operations to CIM repository.
|
1041 mike 1.27 (MEB)
1042
1043 13. More on association implementation (all four operations supported).
1044 Need to handle deletion of associations and protocol stubs still.
1045 Need to test class associations (rather than just instance associations).
1046 Need to handle deleteInstance().
1047 (MEB)
|
1048 mike 1.26
|
1049 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1050
|
1051 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1052 AssociationName
|
1053 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1054 pages.
1055
|
1056 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1057 sage 1.31
1058 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1059 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1060 Made cimserver accept the -D flag to eliminate the need for environment
1061 variables.
|
1062 mike 1.32
1063 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1064 References() and ReferenceNames() CIM operations. These only operate
1065 on instances at this time. They will operate on classes soon.
|
1066 kumpf 1.34
1067 19. (Mike Glantz) Extended and modified dynamic support
1068 changes to (1) work on HP-UX and (2) have all images and libraries
1069 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1070 change is to program.mak and library-unix.mak, removing specific
1071 lists of dynamic library specs and putting them in the Makefile
1072 and libraries.mak files that build the actual targets (lots of
1073 these now have DYNAMIC_LIBRARIES defined).
|
1074 karl 1.35
1075 20. (Karl) added basic Queue function to common (based on array) and added
1076 tests for stack and queue.
|
1077 karl 1.38
1078 ------------------------------------------------------------------------------
1079 --
|
1080 mike 1.36
|
1081 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1082 karl 1.11
|
1083 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1084 CIMServer (both)
|
1085 karl 1.11 Functions added include:
1086 a. Enable trace to log file.
|
1087 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1088 is
|
1089 karl 1.11 trace to log, -t is trace to console).
1090 c. add parameter in optionsrow for help message and enable the capture
|
1091 karl 1.12 of these messages in Options class. Also added help print that
1092 prints these things out. However, format not to beautiful.
|
1093 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1094 e. Extend the Clients\testclient so he does tests on Namespace.
|
1095 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1096 mike 1.33
|
1097 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1098 mike 1.33
|
1099 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1100 logs
|
1101 karl 1.12 are put
|
1102 mike 1.33
|
1103 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1104 This is a preliminary version.
|
1105 mike 1.33
|
1106 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1107 karl 1.13 throws CannotBind exception.
|
1108 mike 1.33
|
1109 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1110 not
|
1111 karl 1.14 print out all of the message. At the least it prints out the error message
1112 and components of the message causing the problem.
|
1113 mike 1.33
|
1114 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1115 mike 1.33
|
1116 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1117 karl 1.14 existed.
|
1118 mike 1.33
1119 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1120 karl 1.15
|
1121 karl 1.29 ------------------------------------------------------------------------------
1122 --
|
1123 karl 1.6 Version 0.97.2
1124
1125 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1126 2. Extend Formatter for Boolean and Uint32 types.
1127 3. Change CIM Server to use Trace (-t) flag. This also changed
1128 Handler.h to work off of flag.
1129 4. Minor corrections to __Namespace Provider.
1130 5. Extend tests for Formatter, String, and other modules.
1131 6. Correct errors in documentation.
1132 7. New working papers (provider interface).
|
1133 karl 1.8 8. Add Providerreg.exe tool.
1134 9. Add trace output for messages sent from the Server.
|
1135 mike 1.26
|
1136 karl 1.29 ------------------------------------------------------------------------------
1137 --
|
1138 mike 1.26
|
1139 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1140 karl 1.5
|
1141 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1142 find functions. Note: This symbol is defined in config.h. (ks).
1143
|
1144 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1145 of dynamic lib loaading.
|
1146 karl 1.1
1147
|
1148 karl 1.29 ------------------------------------------------------------------------------
1149 --
|
1150 mike 1.26
|
1151 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1152 karl 1.1
1153 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1154 qualifiers, methods.
1155 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1156 methods.
1157 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1158 qualifiers and to
1159 remove qualifiers.
1160 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1161 compiler. It probably imposed more limitations than would be required with
|
1162 karl 1.2 the current compiler. This version of the port produces an excessively large
1163 common module due to template bloat. That problem will be fixed in a future
1164 change to the port. Also there are a log of duplicate symbol warnings generate
1165 by the AIC compiler but these cause no problems. The port has been tested
1166 with the complete unit test and client/server test successfully.
|
1167 karl 1.1
1168 --------------------------------------------------------------------------
|
1169 karl 1.2
|
1170 mike 1.4 23 May 2001
|
1171 karl 1.1
|
1172 mike 1.9 1. Ported to HPUX
|
1173 karl 1.5
|
1174 mike 1.9 --------------------------------------------------------------------------
1175
1176 29 May 2001
1177
1178 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1179 mike 1.51
1180
1181
1182
|
1183 karl 1.48
|
1184 karl 1.38
|
1185 karl 1.30
|
1186 karl 1.29
|
1187 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc