1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 kumpf 1.84
296 30. (Roger Kumpf - HP) 19 Mar 2002 - Added range checking for Uint* and
297 Sint* values in XmlReader.cpp. Previously, values that were out of
298 range were simply truncated to fit the given integer size. An
299 exception is now thrown when the given string can not be parsed into
300 an integer of the specified size.
301
|
302 karl 1.59 -------------------------------------------------------------------
|
303 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
304
305 1. Merged back to Main branch. All general development will be in main branch
306 in the future with releases in side branches. Special side developments
307 may temporarily be in side branches.
308 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
309 karl 1.53
310 2. (Karl) 18 December 2001 - Added new directory repositories where repository
311 implementations will be kept to separate them from the
312 repository interface defintion. Initial implementation is genericfile
313 which is the current file based repository.
314
315 Added new build variable RMREPOSITORY which is a generic MAKE command
316 to remove an existing repository. It simply substitutes for the RMDIRHIER
317 command at this point but we will make this a generic part of system
318 in the future.
|
319 karl 1.52
|
320 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
321 to check that all required parameters for intrinsic methods are
322 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
323 exception is thrown. Also added checks for duplicate parameters in the
324 intrinsic methods. If a parameter is specified more than once, a
325 CIM_ERR_INVALID_PARAMETER exception is thrown.
326
|
327 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
328 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
329 queue to this new queue. Modified CIMServer.cpp to create
330 CIMOperationRequestAuthorizer queue only when authorization is enabled.
331 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
332 it available to the CIMOperationRequestDispatcher.
333
|
334 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
335 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
336 forever. The problem was noticed when the TestClient program and CIMserver
337 service were both running. The service wasn't accessible to the TestClient
338 program.
339
|
340 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
341 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
342 in new queue, IndicationService which will get invoked from dispatcher.
343 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
344 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
345 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
346 CIM_GET_INSTANCE_REQUEST_MESSAGE
347 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
348 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
349
350 This new service will also take care of processing the indications on receiving
351 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
352 IndicationProvider or some other mechanism which is not yet clear.
353
354 IndicationService will also receive following messages from PG_ProviderRegistration
355 when a new IndicationProvider will get registered.
356 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
357 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
358
359 I had also defined new Indication Provider APIs, enableIndication, disableIndication
360 and modifyIndication with more parameters passed and eventually planning to terminate
361 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
362 plan to implement one more call as startIndication and will be done soon.
363
364 There are three new test programs in IndicationService directory, which will create
365 Filter, Indication and Subscription instances using IndicationService.
366
367 Also modified sample IndicationProvider code with the new APIs introduced.
|
368 mary 1.56
|
369 karl 1.52 -------------------------------------------------------------------------
|
370 karl 1.1
|
371 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
372 current working dev branch of build
|
373 mike 1.36
|
374 karl 1.49 ---------------------------------------------------------------------------
375 Version 1.1 - July 2001 Development branch (Work in PRogress)
376
|
377 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
378 PARAMETER.REFERENCE constructs for references).
379
380 2. (Mike Brasher) Reworked server communication into new module scheme.
|
381 mike 1.51 =======
382 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
383 seen as part of CGIclient class displays.
384
385 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
386 to the final version in Schemas\CIM25. This included minor
387 corrections, etc and a couple of file changes. This is the
388 official final CIM 25 schema relesed by the DMTF. This change
389 should not affect any current work.
390 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
391 directorys. Note however that today the make repository still
392 loads the 2.5 schema.
393
394 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
395 on XML output.
396
397 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
398 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
399 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
400 declarations in for loop initializers outside the loop, so multiple
401 "for (int i=0; i<10; i++);" statements cause a compile error.
402 mike 1.51
403 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
404 dependency on the config files at the start of the cimserver. Now the
405 cimserver will use in-memory default values in the absence of config files
406 and command line options. Fixed a few defects in the config framework that
407 were causing cimom to crash under certain conditions. Changed the config
408 provider class name to 'PG_ConfigSetting' in the mof file and modified
409 provider implementation files accordingly. Also modified the config CLI
410 to show user friendly error/status messages.
411
412 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
413 (reported incorrect line number on error in XML request if input redirected).
414 Enhanced the -d debug command line option to allow more flexibility in
415 generating debug output.
416
417 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
418 xml when it generates xml output.
419
420 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
421 a common file to reduce the number of files required by the default
422 repository implementation.
423 mike 1.51
424 10. (Mike Brasher) - Fixed minor bug in repository implementation.
425
426 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
427
428 12. (Mike Brasher) - Committed rework of server into queue approach.
429
430 13. (Mike Brasher) - New webserver and webclient examples.
431
432 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
433
434 15. (Mike Brasher) - Initial work on refactorying client into modules.
435 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
436
437 16. (Mike Brasher) - queue-based clients now complete.
438
439 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
440
441 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
442
443 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
444 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
445 a web server. See doc/Servlet for more information.
446
447 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
448 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
449 input and output can be written in a trace file.
450
451 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
452 Created new class SignalHandler that allow registration, activation and
453 deactivation of signal handler functions (Linux only !).
454
455 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
456 ExportClient to support ExportIndication. DisplayConsumer, a sample
457 consumer is added which will consume (by displaying on screen) the
458 indication exported by CIMExportRequestDispatcher. This complete
459 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
460 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
461 are modified to implement above messages.
462
463 XmlIndicationDispatcher test program is modified to test complete
464 operation. It now creates a consumer, handler and indication
465 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
466 indication to consumer. This program needs
467 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
468 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
469 in the repository to complete the test successfully. This test
470 program also needs Handler qualifier defined in repository and
471 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
472 below:
473
474 //====================================================================
475 // CIM_IndicationHandlerXMLHTTP
476 //====================================================================
477 [Description (
478 "CIM_IndicationHandlerXMLHTTP describes the destination for "
479 "Indications to be delivered via HTTP, using a cimXML "
480 "representation."), Handler ("CIMxmlIndicationHandler") ]
481
482 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
483 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
484 a provider library.
485
486 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
487 interface for the provider. InvokeMethod currently uses CIMValue as
488 type for inParameters and outParameters, which are unable to give
489 information about param name, type and value. This should be changed
490 to CIMParamValue which will help providers to know details of the
491 parameter name and type along with value passed through InvoleMethod
492 call. Current implementation uses CIMParamValue as parameters while
493 travelling through message queues and converts it back to array of
494 CIMValue before calling Provider API (which needs to be changed
495 later).
496
497 Also added are two test programs:
498
499 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
500 CIMParamValue class.
501
502 src/Pegasus/Client/tests/InvokeMethod - which makes call to
503 InvokeMethod and displays the return value. Current
504 implementation assumes that provider had returned true value
505 and outParameters (which are now hard coded in
506 CIMOperationRequestDispatcher to implement functionality)
507 mike 1.51 which are passed as response of InvokeMethod to client.
508
509 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
510 authentication to the pegasus code. Created an Authentication Manager
511 and authenticator interfaces. The file based local authentication
512 module has been modified to implement the local authenticator
513 interface, to generate the challenge for the unauthorized requests
514 and to verify the authentication.
515
516 A skeleton program has been created for the Basic Authenticator.
517 This code is in the Security/Authentication directory which is not
518 yet linked into the build.
519
520 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
521 Decoders. Earlier decoders were sending requests and responses
522 before finishing complete Xml parse. This was prone to send
523 request/response even the Xml is wrong after the MethodCall.
524 New changes collects the Message* as return value from the
525 appropriate functions while parsing the Xml and sends on
526 _outputQueue only when Xml is parsed successfully.
527
528 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
529 fix the problem with constructing provider name and loading the
530 providers for unix platforms. Also moved the shared library name
531 construction (appending .sl or .so) from
532 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
533 ProviderModule.cpp and included it in a method that returns
534 provider file path name.
535
536 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
537 Handler. This handler extracts MappingStrings qualifier from class
538 definition and converts it into SNMP specific trap data. The trap
539 structure is defined in a abstract class in snmpDeliverTrap.h file.
540 Every one has his or her own SNMP agent, which will talk with master
541 agent to deliver the trap or may have some other mechanism.
542 Extending snmpDeliverTrap class and deliverTrap method will help to
543 implement specific trap delivery mechanism.
544
545 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
546 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
547 property value to be default in the plan file, remove the property from the
548 plan file. Converted ConfigSettingProvider to use provider2 library.
549 mike 1.51
550 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
551 to allow tracing of a specific number of bytes in a given
552 string. Also modified the XmlIO trace code to use the new interface.
553 Changed the config file defaults for tracing.
554
555 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
556 NonStop platform (NSK) in directory pegasus/mak. The following files
557 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
558 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
559 program-unix.mak. The original program.mak which previously covered
560 all platforms was split into platform-specific make files, and now
561 only contains conditionals. Files config.mak, objects.mak, and
562 library.mak were changed to include the NSK files.
563 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
564
565 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
566 commas (,) in the string values of key properties.
567
568 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
569
570 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
571 pegasus/mak/program-windows.mak that prevented program builds for
572 the windows platform (related to change from 28 Oct). Replaced
573 leading whitespace in front of commands with tabs as required
574 in make files.
575
576 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
577 because getting an error in 26
578
579 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
580 whose types are references. These reference values must be
581 treated specially in the XML encoding, using the VALUE.REFERENCE
582 tag structure.
583
584 Pegasus had been passing reference values simply as String values.
585 For example, EnumerateInstanceNames returned KEYVALUEs of string
586 type rather than VALUE.REFERENCEs.
587
588 I've modified the XmlReader::getKeyBindingElement() and
589 CIMReference::instanceNameToXml() methods to read and write the
590 XML in the proper format. However, making that change required
591 mike 1.51 that a CIMReference object be able to distinguish between a key
592 of String type and a key of reference type.
593
594 I've modified the String format of CIMReferences slightly to
595 allow efficient processing of references whose keys are also of
596 reference type. The "official" form uses the same encoding for
597 key values of String type and of reference type, and so it
598 would be necessary to retrieve the class definition and look up
599 the types of the key properties to determine how to treat the
600 key values. This is clearly too inefficient for internal
601 transformations between CIMReferences and String values.
602
603 The workaround is to encode a 'R' at the beginning of the value
604 for a key of reference type (before the opening '"'). This allows
605 the parser to know a priori whether the key is of String or
606 reference type.
607
608 In this example:
609
610 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
611
612 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
613 the usual encoding. Key2 is a reference property, so the extra 'R'
614 is inserted before its encoded value. Note that this algorithm is
615 recursive, such that RefClass could include KeyC of reference type,
616 which would also get encoded with the 'R' notation.
617
618 The toString() method inserts the 'R' to provide symmetry. A new
619 KeyBinding type (REFERENCE) has been defined to denote keys in a
620 CIMReference that are of reference type. This KeyBinding type must
621 be used appropriately for CIMReference::ttoString() to behave
622 correctly.
623
624 The files that have been modified to make this change are
625 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
626
627 A result of this change is that instances names in the instance
628 repository will include this extra 'R' character. Thus, you will
629 need to repopulate your repository when you download the latest
630 CIMOM version.
631
632 Note that for user-facing uses of the String encoding of instance
633 mike 1.51 names (such as might appear in MOF for static association
634 instances or in the CGI client), this solution is non-standard and
635 therefore unacceptable. It is likely that these points will need
636 to process the more expensive operation of retrieving the class
637 definition to determine the key property types.
638
639 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
640 in case of error in setting trace components. Modified the property owner
641 init and update methods. Submitted the pegasus/mak/Buildmakefile with
642 cleanbuild, rebuild and trace configuration options.
643
644 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
645 (instanceName).
646
647 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
648 GetProperty/SetProperty/EnumerateInstances request/response messages.
649 Added encoding and decoding of PropertyList parameters on all
650 relevant intrinsic methods.
651
652 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
653 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
654 mike 1.51
655 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
656 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
657 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
658 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
659 SystemNsk.cpp) contain stubs. The associated control files
660 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
661 nsk platform links.
662
663 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
664 toString() method for CIMValues of String type. The old behavior
665 returned an XML encoding of the String with special characters
666 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
667 would be returned as a"b. The new behavior just returns the
668 String value directly with no translation. (Note that
669 CIMValue.toXml() may still be used to get the XML-encoded value.)
670
671 This change was necessary in part to correct the behavior of the
672 repository. CreateInstance stores the instance name returned by
673 CIMInstance.getInstanceName(), which is built using calls to
674 CIMValue.toString(). GetInstance searches for the instance name
675 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
676 be successful, CreateInstance must have stored the instance name
677 in that same form, without special character encoding.
678
679 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
680 the CIMValue class. Eliminated improper use of CIMValue.toString(),
681 often replacing with CIMValue.get(String&) or CIMValue.toXml().
682 Also added some error handling in the indication handlers.
683
684 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
685 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
686 to handle local instance path and local classpath. Modified the
687 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
688 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
689
690 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
691 to hold the argument to ModifyInstance and the return values
692 from EnumerateInstances. The client and provider APIs need to
693 be updated to use this class.
694
695 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
696 mike 1.51 source files. This CLI allows addition, modification, removal and listing
697 of CIM users. The CLI is not linked to the main makefile as the Provider
698 functionality is yet to be implemented. Added the function
699 String getPassword(char* prompt) to the System.h and cpp files.
700
701 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
702 the server to challenge the unauthorized requests, authenticate
703 the challenge responses, and verify the subsequent authorized requests.
704 Implemented authentication mechanism on the Client api to send
705 responses to the challenges from the server. Current implementation
706 supports only 'local' authentication mechanism.
707
708 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
709
710 - Changed the return value of EnumerateInstances from Array<CIMInstance>
711 to Array<CIMNamedInstance>
712 - Changed the parameter to ModifyInstance from CIMInstance to
713 CIMNamedInstance
714 - Added an optional PropertyList parameter to ModifyInstance
715 - Changed all handling of PropertyList parameters to use the
716 CIMPropertyList class instead of Array<String>
717 mike 1.51
718 Each of these changes was required to comply with the DMTF specification.
719
720 These changes were made throughout the system except for in the provider
721 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
722 differences from providers, so older providers will continue to function.
723 However, this means that clients can not yet take advantage of the added
724 functionality.
725
726 When the provider API is updated, the following changes will be visible:
727
728 - Providers will get a PropertyList parameter to ModifyInstance which
729 they are required to respect. Providers that can not process the
730 PropertyList must throw a NOT_SUPPORTED exception whenever the
731 list is not null. Clients can take advantage of this change by
732 issuing a ModifyInstance request against a selected set of
733 properties in an instance, rather than being required to replace
734 the entire instance.
735
736 - Providers will be required to return instance names along with
737 instances in the EnumerateInstances method. Clients will receive
738 mike 1.51 these instance names, as the standard dictates.
739
740 - Providers will receive a CIMPropertyList argument containing the
741 PropertyList instead of an Array<String>. This change allows
742 providers to distinguish between an empty list and a null list.
743
744 Note that the repository also does not yet handle the PropertyList in
745 ModifyInstance correctly.
746
747 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
748 provider API to match the changes made to the EnumerateInstances and
749 ModifyInstance operations. These changes were made to comply with
750 the DMTF specification.
751
752 The original Provider API has not been updated, and I have no
753 plans to do so. Providers written to the original API will
754 continue to function, but they will not have the opportunity
755 to take advantage of the features that have been added.
756
757 The significant changes to the Provider2 API are:
758
759 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
760 they are required to respect. Providers that can not process the
761 PropertyList must throw a NOT_SUPPORTED exception whenever the
762 list is not null. Clients can take advantage of this change by
763 issuing a ModifyInstance request against a selected set of
764 properties in an instance, rather than being required to replace
765 the entire instance.
766
767 - Providers will get an IncludeQualifiers parameter to ModifyInstance
768 which they are required to respect. If IncludeQualifiers is
769 false, the qualifiers on the modified instance provided must not
770 be used to update the instance.
771
772 - Providers will be required to return instance names along with
773 instances in the EnumerateInstances method. Clients will receive
774 these instance names, as the standard dictates.
775
776 The providers that are in the Pegasus build have all been updated.
777 However, whenever the PropertyList is not null, the providers throw
778 a NOT_SUPPORTED exception.
779
780 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
781 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
782 the Common module. File Config.h was modified to include the NSK
783 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
784 without the standard (std) namespace.
785
786 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
787 properties to support alternate behavior of the Pegasus repository:
788 repositoryIsDefaultInstanceProvider and repositoryProviderName.
789
790 Using the first one, the repository can be enabled/disabled as the
791 default provider for instance (and association) operations. The default
792 setting is "true", so the default behavior has not been changed. To
793 disable the repository as the default instance provider, issue the
794 following command before starting cimserver:
795
796 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
797
798 The repositoryProviderName configuration property specifies what
799 provider name is used to explicitly register the repository as a
800 provider. This is necessary when the repository needs to serve
801 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
802 to "false". The default value is "repository". To register the
803 repository as an instance provider for a class, add a
804 'Provider("repository")' qualifier to the class definition.
805
806 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
807 pass to providers that act as services. This handle provides
808 service providers with access to the CIMServer data structures.
809
810 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
811 the repository so that it respects the IncludeQualifiers and
812 PropertyList parameters. Updated SetProperty in the repository
813 so that it uses ModifyInstance correctly. The repository now
814 supports GetProperty and SetProperty in addition to ModifyInstance.
815
816 Implemented GetProperty and SetProperty in the Dispatcher and
817 Provider2 so that they get translated to GetInstance and
818 ModifyInstance calls (respectively) in the provider. Providers
819 written to the Provider2 API that correctly process the new
820 ModifyInstance parameters will automatically support SetProperty
821 operations. Note that GetProperty and SetProperty currently only
822 mike 1.51 work for String properties because of an XML encoding limitation.
823
824 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
825 Security components for authentication and authorization.
826
827 Authentication and User Management:
828 cimuser CLI : This CLI is used for addition, modification, removal
829 and listing of CIM Users. The CIM user password is encrypted and stored
830 in a file. The password file format is compatible with Apache's htpasswd
831 generated password file.
832
833 cimauth CLI implement the authorization managment functionality by letting
834 to add/remove/list user authorizations.
835
836 User Manager and User Manager Provider components implement the user
837 management and authorization functionality.
838
839 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
840 under src/Pegasus/WQL which contains library and BNF.
841
842 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
843 mike 1.51 which does provider registration, block, unblock, and stop a provider.
844 It also alert Subscription Service of any provider registration changes.
845
846 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
847 and String.cpp with PEG_min. The _min macro caused problems on the
848 NSK platform because of a duplicate definition in a standard file.
849
850 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
851 subscription service provider that serves as the instance provider for the
852 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
853 classes (from CIM_Events27.mof). The service also takes appropriate action
854 in response to startup, shutdown of the cimom, termination of a provider,
855 or change in provider registration.
856
857 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
858 and the command line interface for shutting down cimom gracefully.
859 For more information, refer to the CIMOM Shutdown working paper
860 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
861
862 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
863 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
864 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
865 constructor to set a pointer to the server-, resp. client wide SSL_Context
866 structure. The Socket field in HTTPConnection is substituted with an
867 MP_Socket pointer, a class that is designed to hide the differences
868 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
869 is defined even in a non-ssl environment.
870 How to use it in a Server or Client:
871 1. Just create an SSL_Context once per Server/Client address space
872 2. Construct every HTTPConnector/Acceptor with a pointer to this
873 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
874 without SSL_Context for conventional connections.
|
875 mike 1.50
|
876 mike 1.51 The Configuration data was extended with the boolean SSL property, and
877 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
878
879 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
880 kumpf 1.61
|
881 mike 1.51 ---------------------------------------------------------------------------
882 Version 1.1 - July 2001 Development branch
883 Tagged as version_1_01 on 3 August 2001 (sorry should have been
884 1.1
885
886 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
887 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
888 and ExportClient classes. the indication.
889
890 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
891 make the delivery of indications over Xml-HTTP and email respectively.
892
893 Provided examples for HandlerTable, XmlIndicationDelivery and
894 SendMailIndicationDelivery to support this implementation.
895
896 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
897 library and a thread-safe message queue (first stage). Classes defined
898 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
899 and SimpleThread.
900
901 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
902 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
903 information on using wbemexec. A simple test script is included. Please
904 see pegasus/src/Clients/wbemexec/tests/readme for information on running
905 the test script.
906
907 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
908 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
909 and
910 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
911 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
912 src/Pegasus/Common/TraceFileHandler.cpp.
913
914 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
915 Config CLI. Please refer to the documentation
916 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
917 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
918 using the config framework and cimconfig CLI. Make sure to load the config
919 mof (src/gmake config) before starting the cimserver. A simple test script
920 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
921 information on running the test script.
922
923 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
924 (changed the H and CPP files for the major CIM objects. These
925 functions generate CIM MOF output for the objects.
926
927 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
928 Authentication provides security mechanism to authenticates CIM clients
929 that
930 connect to CIM Server on the same system without having to specify a
931 password.
932 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
933 This component only works on unix and it's not linked in with the main
934 build.
935 When authentication framework is defined this component may need to be
936 modified to integrate with the framework.
|
937 karl 1.49
938 ---------------------------------------------------------------------------
939 Version 0.99.x (Fixes to version 0.99) in Process
|
940 mike 1.51
|
941 karl 1.49 NOTE: Please do not input anything to this branch except for critical
942 fixes. This is, in effect, 1.0 and we do not want to use it for
943 development.
944
945 ----------------------------------------------------------------------------
946
947 Version 0.98.0 - Work in progress (This number skipped)
|
948 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
949 mike 1.36
|
950 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
951 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
952
|
953 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
954 in the HTML URL reference for passing instance names.
955
|
956 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
957
958 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
959
|
960 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
961 allow slp to compile.
962
|
963 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
964
965 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
966 ids to queue pointers).
967
|
968 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
969 and Dispatcher.
970
|
971 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
972 and
973 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
974 chip 1.44 ResponseHandler for Provider2 interface.
|
975 mike 1.45
976 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
977
978 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
979
|
980 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
981
|
982 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
983
984 12. (Mike Brasher) - Fixed compiler error on Linux.
985
|
986 karl 1.38 ------------------------------------------------------------------------------
987 --
|
988 mike 1.26
|
989 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
990 karl 1.16
991 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
992 for NT and Linux platforms.
|
993 mike 1.26
|
994 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
995 5988.
996 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
997 the DMTF.
|
998 mike 1.26
|
999 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
1000 Fusion event. THis included a) extended the test for end of HTTP header from
1001 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
1002 Extended the HTTP message ID to allow for non-numeric message IDs.
|
1003 mike 1.26
|
1004 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
1005 and created RepositoryDeclContext.{cpp,h}. This is the first step in
1006 revamping the compiler to work independently of the repository (grb).
|
1007 mike 1.26
|
1008 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1009 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1010 Now when you build normally, you will get the committed grammar and parser
1011 files instead of generating your own for a particular platform. This should
1012 prevent back-level lex and yacc implementations from generating troublesome
1013 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1014 bob 1.20 (grb)
|
1015 mike 1.26
|
1016 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1017 This change paves the way for upcoming changes that will allow the compiler
1018 to work indepently of the repository. (grb)
|
1019 mike 1.26
|
1020 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1021 mike 1.26
|
1022 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1023 modifyClass,
|
1024 chip 1.22 createClass to protect caller's object.
|
1025 mike 1.26
|
1026 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1027 directory. These
1028 interfaces allow very smart providers to perform advances operations.
1029 CIMProviderStub has
|
1030 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1031 mike 1.26
|
1032 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1033 mike 1.26
|
1034 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1035 repository you make world, make rebuild or make repository. ks
|
1036 mike 1.26
1037 12. Added associators() and associatorNames() operations to CIM repository.
|
1038 mike 1.27 (MEB)
1039
1040 13. More on association implementation (all four operations supported).
1041 Need to handle deletion of associations and protocol stubs still.
1042 Need to test class associations (rather than just instance associations).
1043 Need to handle deleteInstance().
1044 (MEB)
|
1045 mike 1.26
|
1046 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1047
|
1048 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1049 AssociationName
|
1050 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1051 pages.
1052
|
1053 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1054 sage 1.31
1055 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1056 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1057 Made cimserver accept the -D flag to eliminate the need for environment
1058 variables.
|
1059 mike 1.32
1060 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1061 References() and ReferenceNames() CIM operations. These only operate
1062 on instances at this time. They will operate on classes soon.
|
1063 kumpf 1.34
1064 19. (Mike Glantz) Extended and modified dynamic support
1065 changes to (1) work on HP-UX and (2) have all images and libraries
1066 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1067 change is to program.mak and library-unix.mak, removing specific
1068 lists of dynamic library specs and putting them in the Makefile
1069 and libraries.mak files that build the actual targets (lots of
1070 these now have DYNAMIC_LIBRARIES defined).
|
1071 karl 1.35
1072 20. (Karl) added basic Queue function to common (based on array) and added
1073 tests for stack and queue.
|
1074 karl 1.38
1075 ------------------------------------------------------------------------------
1076 --
|
1077 mike 1.36
|
1078 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1079 karl 1.11
|
1080 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1081 CIMServer (both)
|
1082 karl 1.11 Functions added include:
1083 a. Enable trace to log file.
|
1084 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1085 is
|
1086 karl 1.11 trace to log, -t is trace to console).
1087 c. add parameter in optionsrow for help message and enable the capture
|
1088 karl 1.12 of these messages in Options class. Also added help print that
1089 prints these things out. However, format not to beautiful.
|
1090 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1091 e. Extend the Clients\testclient so he does tests on Namespace.
|
1092 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1093 mike 1.33
|
1094 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1095 mike 1.33
|
1096 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1097 logs
|
1098 karl 1.12 are put
|
1099 mike 1.33
|
1100 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1101 This is a preliminary version.
|
1102 mike 1.33
|
1103 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1104 karl 1.13 throws CannotBind exception.
|
1105 mike 1.33
|
1106 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1107 not
|
1108 karl 1.14 print out all of the message. At the least it prints out the error message
1109 and components of the message causing the problem.
|
1110 mike 1.33
|
1111 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1112 mike 1.33
|
1113 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1114 karl 1.14 existed.
|
1115 mike 1.33
1116 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1117 karl 1.15
|
1118 karl 1.29 ------------------------------------------------------------------------------
1119 --
|
1120 karl 1.6 Version 0.97.2
1121
1122 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1123 2. Extend Formatter for Boolean and Uint32 types.
1124 3. Change CIM Server to use Trace (-t) flag. This also changed
1125 Handler.h to work off of flag.
1126 4. Minor corrections to __Namespace Provider.
1127 5. Extend tests for Formatter, String, and other modules.
1128 6. Correct errors in documentation.
1129 7. New working papers (provider interface).
|
1130 karl 1.8 8. Add Providerreg.exe tool.
1131 9. Add trace output for messages sent from the Server.
|
1132 mike 1.26
|
1133 karl 1.29 ------------------------------------------------------------------------------
1134 --
|
1135 mike 1.26
|
1136 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1137 karl 1.5
|
1138 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1139 find functions. Note: This symbol is defined in config.h. (ks).
1140
|
1141 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1142 of dynamic lib loaading.
|
1143 karl 1.1
1144
|
1145 karl 1.29 ------------------------------------------------------------------------------
1146 --
|
1147 mike 1.26
|
1148 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1149 karl 1.1
1150 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1151 qualifiers, methods.
1152 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1153 methods.
1154 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1155 qualifiers and to
1156 remove qualifiers.
1157 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1158 compiler. It probably imposed more limitations than would be required with
|
1159 karl 1.2 the current compiler. This version of the port produces an excessively large
1160 common module due to template bloat. That problem will be fixed in a future
1161 change to the port. Also there are a log of duplicate symbol warnings generate
1162 by the AIC compiler but these cause no problems. The port has been tested
1163 with the complete unit test and client/server test successfully.
|
1164 karl 1.1
1165 --------------------------------------------------------------------------
|
1166 karl 1.2
|
1167 mike 1.4 23 May 2001
|
1168 karl 1.1
|
1169 mike 1.9 1. Ported to HPUX
|
1170 karl 1.5
|
1171 mike 1.9 --------------------------------------------------------------------------
1172
1173 29 May 2001
1174
1175 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1176 mike 1.51
1177
1178
1179
|
1180 karl 1.48
|
1181 karl 1.38
|
1182 karl 1.30
|
1183 karl 1.29
|
1184 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc