1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.83 28. (Bob Blair by KS) 17 March 2002 - Modified repository so there is both a
290 local repository (cimmofl) and a client interface repository (cimmof)
291 executable
292
293 29. (KS ) 18 March 2002 - Modified schema makefiles to use the cimomfl respository
294 executable.
|
295 karl 1.59 -------------------------------------------------------------------
|
296 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
297
298 1. Merged back to Main branch. All general development will be in main branch
299 in the future with releases in side branches. Special side developments
300 may temporarily be in side branches.
301 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
302 karl 1.53
303 2. (Karl) 18 December 2001 - Added new directory repositories where repository
304 implementations will be kept to separate them from the
305 repository interface defintion. Initial implementation is genericfile
306 which is the current file based repository.
307
308 Added new build variable RMREPOSITORY which is a generic MAKE command
309 to remove an existing repository. It simply substitutes for the RMDIRHIER
310 command at this point but we will make this a generic part of system
311 in the future.
|
312 karl 1.52
|
313 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
314 to check that all required parameters for intrinsic methods are
315 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
316 exception is thrown. Also added checks for duplicate parameters in the
317 intrinsic methods. If a parameter is specified more than once, a
318 CIM_ERR_INVALID_PARAMETER exception is thrown.
319
|
320 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
321 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
322 queue to this new queue. Modified CIMServer.cpp to create
323 CIMOperationRequestAuthorizer queue only when authorization is enabled.
324 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
325 it available to the CIMOperationRequestDispatcher.
326
|
327 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
328 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
329 forever. The problem was noticed when the TestClient program and CIMserver
330 service were both running. The service wasn't accessible to the TestClient
331 program.
332
|
333 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
334 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
335 in new queue, IndicationService which will get invoked from dispatcher.
336 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
337 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
338 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
339 CIM_GET_INSTANCE_REQUEST_MESSAGE
340 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
341 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
342
343 This new service will also take care of processing the indications on receiving
344 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
345 IndicationProvider or some other mechanism which is not yet clear.
346
347 IndicationService will also receive following messages from PG_ProviderRegistration
348 when a new IndicationProvider will get registered.
349 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
350 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
351
352 I had also defined new Indication Provider APIs, enableIndication, disableIndication
353 and modifyIndication with more parameters passed and eventually planning to terminate
354 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
355 plan to implement one more call as startIndication and will be done soon.
356
357 There are three new test programs in IndicationService directory, which will create
358 Filter, Indication and Subscription instances using IndicationService.
359
360 Also modified sample IndicationProvider code with the new APIs introduced.
|
361 mary 1.56
|
362 karl 1.52 -------------------------------------------------------------------------
|
363 karl 1.1
|
364 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
365 current working dev branch of build
|
366 mike 1.36
|
367 karl 1.49 ---------------------------------------------------------------------------
368 Version 1.1 - July 2001 Development branch (Work in PRogress)
369
|
370 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
371 PARAMETER.REFERENCE constructs for references).
372
373 2. (Mike Brasher) Reworked server communication into new module scheme.
|
374 mike 1.51 =======
375 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
376 seen as part of CGIclient class displays.
377
378 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
379 to the final version in Schemas\CIM25. This included minor
380 corrections, etc and a couple of file changes. This is the
381 official final CIM 25 schema relesed by the DMTF. This change
382 should not affect any current work.
383 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
384 directorys. Note however that today the make repository still
385 loads the 2.5 schema.
386
387 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
388 on XML output.
389
390 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
391 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
392 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
393 declarations in for loop initializers outside the loop, so multiple
394 "for (int i=0; i<10; i++);" statements cause a compile error.
395 mike 1.51
396 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
397 dependency on the config files at the start of the cimserver. Now the
398 cimserver will use in-memory default values in the absence of config files
399 and command line options. Fixed a few defects in the config framework that
400 were causing cimom to crash under certain conditions. Changed the config
401 provider class name to 'PG_ConfigSetting' in the mof file and modified
402 provider implementation files accordingly. Also modified the config CLI
403 to show user friendly error/status messages.
404
405 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
406 (reported incorrect line number on error in XML request if input redirected).
407 Enhanced the -d debug command line option to allow more flexibility in
408 generating debug output.
409
410 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
411 xml when it generates xml output.
412
413 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
414 a common file to reduce the number of files required by the default
415 repository implementation.
416 mike 1.51
417 10. (Mike Brasher) - Fixed minor bug in repository implementation.
418
419 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
420
421 12. (Mike Brasher) - Committed rework of server into queue approach.
422
423 13. (Mike Brasher) - New webserver and webclient examples.
424
425 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
426
427 15. (Mike Brasher) - Initial work on refactorying client into modules.
428 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
429
430 16. (Mike Brasher) - queue-based clients now complete.
431
432 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
433
434 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
435
436 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
437 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
438 a web server. See doc/Servlet for more information.
439
440 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
441 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
442 input and output can be written in a trace file.
443
444 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
445 Created new class SignalHandler that allow registration, activation and
446 deactivation of signal handler functions (Linux only !).
447
448 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
449 ExportClient to support ExportIndication. DisplayConsumer, a sample
450 consumer is added which will consume (by displaying on screen) the
451 indication exported by CIMExportRequestDispatcher. This complete
452 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
453 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
454 are modified to implement above messages.
455
456 XmlIndicationDispatcher test program is modified to test complete
457 operation. It now creates a consumer, handler and indication
458 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
459 indication to consumer. This program needs
460 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
461 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
462 in the repository to complete the test successfully. This test
463 program also needs Handler qualifier defined in repository and
464 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
465 below:
466
467 //====================================================================
468 // CIM_IndicationHandlerXMLHTTP
469 //====================================================================
470 [Description (
471 "CIM_IndicationHandlerXMLHTTP describes the destination for "
472 "Indications to be delivered via HTTP, using a cimXML "
473 "representation."), Handler ("CIMxmlIndicationHandler") ]
474
475 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
476 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
477 a provider library.
478
479 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
480 interface for the provider. InvokeMethod currently uses CIMValue as
481 type for inParameters and outParameters, which are unable to give
482 information about param name, type and value. This should be changed
483 to CIMParamValue which will help providers to know details of the
484 parameter name and type along with value passed through InvoleMethod
485 call. Current implementation uses CIMParamValue as parameters while
486 travelling through message queues and converts it back to array of
487 CIMValue before calling Provider API (which needs to be changed
488 later).
489
490 Also added are two test programs:
491
492 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
493 CIMParamValue class.
494
495 src/Pegasus/Client/tests/InvokeMethod - which makes call to
496 InvokeMethod and displays the return value. Current
497 implementation assumes that provider had returned true value
498 and outParameters (which are now hard coded in
499 CIMOperationRequestDispatcher to implement functionality)
500 mike 1.51 which are passed as response of InvokeMethod to client.
501
502 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
503 authentication to the pegasus code. Created an Authentication Manager
504 and authenticator interfaces. The file based local authentication
505 module has been modified to implement the local authenticator
506 interface, to generate the challenge for the unauthorized requests
507 and to verify the authentication.
508
509 A skeleton program has been created for the Basic Authenticator.
510 This code is in the Security/Authentication directory which is not
511 yet linked into the build.
512
513 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
514 Decoders. Earlier decoders were sending requests and responses
515 before finishing complete Xml parse. This was prone to send
516 request/response even the Xml is wrong after the MethodCall.
517 New changes collects the Message* as return value from the
518 appropriate functions while parsing the Xml and sends on
519 _outputQueue only when Xml is parsed successfully.
520
521 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
522 fix the problem with constructing provider name and loading the
523 providers for unix platforms. Also moved the shared library name
524 construction (appending .sl or .so) from
525 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
526 ProviderModule.cpp and included it in a method that returns
527 provider file path name.
528
529 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
530 Handler. This handler extracts MappingStrings qualifier from class
531 definition and converts it into SNMP specific trap data. The trap
532 structure is defined in a abstract class in snmpDeliverTrap.h file.
533 Every one has his or her own SNMP agent, which will talk with master
534 agent to deliver the trap or may have some other mechanism.
535 Extending snmpDeliverTrap class and deliverTrap method will help to
536 implement specific trap delivery mechanism.
537
538 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
539 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
540 property value to be default in the plan file, remove the property from the
541 plan file. Converted ConfigSettingProvider to use provider2 library.
542 mike 1.51
543 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
544 to allow tracing of a specific number of bytes in a given
545 string. Also modified the XmlIO trace code to use the new interface.
546 Changed the config file defaults for tracing.
547
548 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
549 NonStop platform (NSK) in directory pegasus/mak. The following files
550 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
551 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
552 program-unix.mak. The original program.mak which previously covered
553 all platforms was split into platform-specific make files, and now
554 only contains conditionals. Files config.mak, objects.mak, and
555 library.mak were changed to include the NSK files.
556 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
557
558 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
559 commas (,) in the string values of key properties.
560
561 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
562
563 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
564 pegasus/mak/program-windows.mak that prevented program builds for
565 the windows platform (related to change from 28 Oct). Replaced
566 leading whitespace in front of commands with tabs as required
567 in make files.
568
569 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
570 because getting an error in 26
571
572 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
573 whose types are references. These reference values must be
574 treated specially in the XML encoding, using the VALUE.REFERENCE
575 tag structure.
576
577 Pegasus had been passing reference values simply as String values.
578 For example, EnumerateInstanceNames returned KEYVALUEs of string
579 type rather than VALUE.REFERENCEs.
580
581 I've modified the XmlReader::getKeyBindingElement() and
582 CIMReference::instanceNameToXml() methods to read and write the
583 XML in the proper format. However, making that change required
584 mike 1.51 that a CIMReference object be able to distinguish between a key
585 of String type and a key of reference type.
586
587 I've modified the String format of CIMReferences slightly to
588 allow efficient processing of references whose keys are also of
589 reference type. The "official" form uses the same encoding for
590 key values of String type and of reference type, and so it
591 would be necessary to retrieve the class definition and look up
592 the types of the key properties to determine how to treat the
593 key values. This is clearly too inefficient for internal
594 transformations between CIMReferences and String values.
595
596 The workaround is to encode a 'R' at the beginning of the value
597 for a key of reference type (before the opening '"'). This allows
598 the parser to know a priori whether the key is of String or
599 reference type.
600
601 In this example:
602
603 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
604
605 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
606 the usual encoding. Key2 is a reference property, so the extra 'R'
607 is inserted before its encoded value. Note that this algorithm is
608 recursive, such that RefClass could include KeyC of reference type,
609 which would also get encoded with the 'R' notation.
610
611 The toString() method inserts the 'R' to provide symmetry. A new
612 KeyBinding type (REFERENCE) has been defined to denote keys in a
613 CIMReference that are of reference type. This KeyBinding type must
614 be used appropriately for CIMReference::ttoString() to behave
615 correctly.
616
617 The files that have been modified to make this change are
618 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
619
620 A result of this change is that instances names in the instance
621 repository will include this extra 'R' character. Thus, you will
622 need to repopulate your repository when you download the latest
623 CIMOM version.
624
625 Note that for user-facing uses of the String encoding of instance
626 mike 1.51 names (such as might appear in MOF for static association
627 instances or in the CGI client), this solution is non-standard and
628 therefore unacceptable. It is likely that these points will need
629 to process the more expensive operation of retrieving the class
630 definition to determine the key property types.
631
632 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
633 in case of error in setting trace components. Modified the property owner
634 init and update methods. Submitted the pegasus/mak/Buildmakefile with
635 cleanbuild, rebuild and trace configuration options.
636
637 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
638 (instanceName).
639
640 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
641 GetProperty/SetProperty/EnumerateInstances request/response messages.
642 Added encoding and decoding of PropertyList parameters on all
643 relevant intrinsic methods.
644
645 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
646 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
647 mike 1.51
648 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
649 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
650 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
651 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
652 SystemNsk.cpp) contain stubs. The associated control files
653 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
654 nsk platform links.
655
656 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
657 toString() method for CIMValues of String type. The old behavior
658 returned an XML encoding of the String with special characters
659 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
660 would be returned as a"b. The new behavior just returns the
661 String value directly with no translation. (Note that
662 CIMValue.toXml() may still be used to get the XML-encoded value.)
663
664 This change was necessary in part to correct the behavior of the
665 repository. CreateInstance stores the instance name returned by
666 CIMInstance.getInstanceName(), which is built using calls to
667 CIMValue.toString(). GetInstance searches for the instance name
668 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
669 be successful, CreateInstance must have stored the instance name
670 in that same form, without special character encoding.
671
672 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
673 the CIMValue class. Eliminated improper use of CIMValue.toString(),
674 often replacing with CIMValue.get(String&) or CIMValue.toXml().
675 Also added some error handling in the indication handlers.
676
677 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
678 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
679 to handle local instance path and local classpath. Modified the
680 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
681 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
682
683 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
684 to hold the argument to ModifyInstance and the return values
685 from EnumerateInstances. The client and provider APIs need to
686 be updated to use this class.
687
688 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
689 mike 1.51 source files. This CLI allows addition, modification, removal and listing
690 of CIM users. The CLI is not linked to the main makefile as the Provider
691 functionality is yet to be implemented. Added the function
692 String getPassword(char* prompt) to the System.h and cpp files.
693
694 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
695 the server to challenge the unauthorized requests, authenticate
696 the challenge responses, and verify the subsequent authorized requests.
697 Implemented authentication mechanism on the Client api to send
698 responses to the challenges from the server. Current implementation
699 supports only 'local' authentication mechanism.
700
701 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
702
703 - Changed the return value of EnumerateInstances from Array<CIMInstance>
704 to Array<CIMNamedInstance>
705 - Changed the parameter to ModifyInstance from CIMInstance to
706 CIMNamedInstance
707 - Added an optional PropertyList parameter to ModifyInstance
708 - Changed all handling of PropertyList parameters to use the
709 CIMPropertyList class instead of Array<String>
710 mike 1.51
711 Each of these changes was required to comply with the DMTF specification.
712
713 These changes were made throughout the system except for in the provider
714 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
715 differences from providers, so older providers will continue to function.
716 However, this means that clients can not yet take advantage of the added
717 functionality.
718
719 When the provider API is updated, the following changes will be visible:
720
721 - Providers will get a PropertyList parameter to ModifyInstance which
722 they are required to respect. Providers that can not process the
723 PropertyList must throw a NOT_SUPPORTED exception whenever the
724 list is not null. Clients can take advantage of this change by
725 issuing a ModifyInstance request against a selected set of
726 properties in an instance, rather than being required to replace
727 the entire instance.
728
729 - Providers will be required to return instance names along with
730 instances in the EnumerateInstances method. Clients will receive
731 mike 1.51 these instance names, as the standard dictates.
732
733 - Providers will receive a CIMPropertyList argument containing the
734 PropertyList instead of an Array<String>. This change allows
735 providers to distinguish between an empty list and a null list.
736
737 Note that the repository also does not yet handle the PropertyList in
738 ModifyInstance correctly.
739
740 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
741 provider API to match the changes made to the EnumerateInstances and
742 ModifyInstance operations. These changes were made to comply with
743 the DMTF specification.
744
745 The original Provider API has not been updated, and I have no
746 plans to do so. Providers written to the original API will
747 continue to function, but they will not have the opportunity
748 to take advantage of the features that have been added.
749
750 The significant changes to the Provider2 API are:
751
752 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
753 they are required to respect. Providers that can not process the
754 PropertyList must throw a NOT_SUPPORTED exception whenever the
755 list is not null. Clients can take advantage of this change by
756 issuing a ModifyInstance request against a selected set of
757 properties in an instance, rather than being required to replace
758 the entire instance.
759
760 - Providers will get an IncludeQualifiers parameter to ModifyInstance
761 which they are required to respect. If IncludeQualifiers is
762 false, the qualifiers on the modified instance provided must not
763 be used to update the instance.
764
765 - Providers will be required to return instance names along with
766 instances in the EnumerateInstances method. Clients will receive
767 these instance names, as the standard dictates.
768
769 The providers that are in the Pegasus build have all been updated.
770 However, whenever the PropertyList is not null, the providers throw
771 a NOT_SUPPORTED exception.
772
773 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
774 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
775 the Common module. File Config.h was modified to include the NSK
776 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
777 without the standard (std) namespace.
778
779 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
780 properties to support alternate behavior of the Pegasus repository:
781 repositoryIsDefaultInstanceProvider and repositoryProviderName.
782
783 Using the first one, the repository can be enabled/disabled as the
784 default provider for instance (and association) operations. The default
785 setting is "true", so the default behavior has not been changed. To
786 disable the repository as the default instance provider, issue the
787 following command before starting cimserver:
788
789 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
790
791 The repositoryProviderName configuration property specifies what
792 provider name is used to explicitly register the repository as a
793 provider. This is necessary when the repository needs to serve
794 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
795 to "false". The default value is "repository". To register the
796 repository as an instance provider for a class, add a
797 'Provider("repository")' qualifier to the class definition.
798
799 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
800 pass to providers that act as services. This handle provides
801 service providers with access to the CIMServer data structures.
802
803 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
804 the repository so that it respects the IncludeQualifiers and
805 PropertyList parameters. Updated SetProperty in the repository
806 so that it uses ModifyInstance correctly. The repository now
807 supports GetProperty and SetProperty in addition to ModifyInstance.
808
809 Implemented GetProperty and SetProperty in the Dispatcher and
810 Provider2 so that they get translated to GetInstance and
811 ModifyInstance calls (respectively) in the provider. Providers
812 written to the Provider2 API that correctly process the new
813 ModifyInstance parameters will automatically support SetProperty
814 operations. Note that GetProperty and SetProperty currently only
815 mike 1.51 work for String properties because of an XML encoding limitation.
816
817 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
818 Security components for authentication and authorization.
819
820 Authentication and User Management:
821 cimuser CLI : This CLI is used for addition, modification, removal
822 and listing of CIM Users. The CIM user password is encrypted and stored
823 in a file. The password file format is compatible with Apache's htpasswd
824 generated password file.
825
826 cimauth CLI implement the authorization managment functionality by letting
827 to add/remove/list user authorizations.
828
829 User Manager and User Manager Provider components implement the user
830 management and authorization functionality.
831
832 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
833 under src/Pegasus/WQL which contains library and BNF.
834
835 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
836 mike 1.51 which does provider registration, block, unblock, and stop a provider.
837 It also alert Subscription Service of any provider registration changes.
838
839 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
840 and String.cpp with PEG_min. The _min macro caused problems on the
841 NSK platform because of a duplicate definition in a standard file.
842
843 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
844 subscription service provider that serves as the instance provider for the
845 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
846 classes (from CIM_Events27.mof). The service also takes appropriate action
847 in response to startup, shutdown of the cimom, termination of a provider,
848 or change in provider registration.
849
850 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
851 and the command line interface for shutting down cimom gracefully.
852 For more information, refer to the CIMOM Shutdown working paper
853 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
854
855 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
856 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
857 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
858 constructor to set a pointer to the server-, resp. client wide SSL_Context
859 structure. The Socket field in HTTPConnection is substituted with an
860 MP_Socket pointer, a class that is designed to hide the differences
861 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
862 is defined even in a non-ssl environment.
863 How to use it in a Server or Client:
864 1. Just create an SSL_Context once per Server/Client address space
865 2. Construct every HTTPConnector/Acceptor with a pointer to this
866 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
867 without SSL_Context for conventional connections.
|
868 mike 1.50
|
869 mike 1.51 The Configuration data was extended with the boolean SSL property, and
870 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
871
872 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
873 kumpf 1.61
|
874 mike 1.51 ---------------------------------------------------------------------------
875 Version 1.1 - July 2001 Development branch
876 Tagged as version_1_01 on 3 August 2001 (sorry should have been
877 1.1
878
879 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
880 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
881 and ExportClient classes. the indication.
882
883 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
884 make the delivery of indications over Xml-HTTP and email respectively.
885
886 Provided examples for HandlerTable, XmlIndicationDelivery and
887 SendMailIndicationDelivery to support this implementation.
888
889 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
890 library and a thread-safe message queue (first stage). Classes defined
891 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
892 and SimpleThread.
893
894 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
895 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
896 information on using wbemexec. A simple test script is included. Please
897 see pegasus/src/Clients/wbemexec/tests/readme for information on running
898 the test script.
899
900 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
901 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
902 and
903 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
904 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
905 src/Pegasus/Common/TraceFileHandler.cpp.
906
907 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
908 Config CLI. Please refer to the documentation
909 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
910 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
911 using the config framework and cimconfig CLI. Make sure to load the config
912 mof (src/gmake config) before starting the cimserver. A simple test script
913 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
914 information on running the test script.
915
916 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
917 (changed the H and CPP files for the major CIM objects. These
918 functions generate CIM MOF output for the objects.
919
920 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
921 Authentication provides security mechanism to authenticates CIM clients
922 that
923 connect to CIM Server on the same system without having to specify a
924 password.
925 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
926 This component only works on unix and it's not linked in with the main
927 build.
928 When authentication framework is defined this component may need to be
929 modified to integrate with the framework.
|
930 karl 1.49
931 ---------------------------------------------------------------------------
932 Version 0.99.x (Fixes to version 0.99) in Process
|
933 mike 1.51
|
934 karl 1.49 NOTE: Please do not input anything to this branch except for critical
935 fixes. This is, in effect, 1.0 and we do not want to use it for
936 development.
937
938 ----------------------------------------------------------------------------
939
940 Version 0.98.0 - Work in progress (This number skipped)
|
941 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
942 mike 1.36
|
943 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
944 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
945
|
946 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
947 in the HTML URL reference for passing instance names.
948
|
949 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
950
951 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
952
|
953 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
954 allow slp to compile.
955
|
956 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
957
958 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
959 ids to queue pointers).
960
|
961 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
962 and Dispatcher.
963
|
964 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
965 and
966 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
967 chip 1.44 ResponseHandler for Provider2 interface.
|
968 mike 1.45
969 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
970
971 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
972
|
973 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
974
|
975 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
976
977 12. (Mike Brasher) - Fixed compiler error on Linux.
978
|
979 karl 1.38 ------------------------------------------------------------------------------
980 --
|
981 mike 1.26
|
982 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
983 karl 1.16
984 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
985 for NT and Linux platforms.
|
986 mike 1.26
|
987 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
988 5988.
989 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
990 the DMTF.
|
991 mike 1.26
|
992 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
993 Fusion event. THis included a) extended the test for end of HTTP header from
994 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
995 Extended the HTTP message ID to allow for non-numeric message IDs.
|
996 mike 1.26
|
997 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
998 and created RepositoryDeclContext.{cpp,h}. This is the first step in
999 revamping the compiler to work independently of the repository (grb).
|
1000 mike 1.26
|
1001 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
1002 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
1003 Now when you build normally, you will get the committed grammar and parser
1004 files instead of generating your own for a particular platform. This should
1005 prevent back-level lex and yacc implementations from generating troublesome
1006 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1007 bob 1.20 (grb)
|
1008 mike 1.26
|
1009 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1010 This change paves the way for upcoming changes that will allow the compiler
1011 to work indepently of the repository. (grb)
|
1012 mike 1.26
|
1013 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1014 mike 1.26
|
1015 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1016 modifyClass,
|
1017 chip 1.22 createClass to protect caller's object.
|
1018 mike 1.26
|
1019 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1020 directory. These
1021 interfaces allow very smart providers to perform advances operations.
1022 CIMProviderStub has
|
1023 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1024 mike 1.26
|
1025 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1026 mike 1.26
|
1027 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1028 repository you make world, make rebuild or make repository. ks
|
1029 mike 1.26
1030 12. Added associators() and associatorNames() operations to CIM repository.
|
1031 mike 1.27 (MEB)
1032
1033 13. More on association implementation (all four operations supported).
1034 Need to handle deletion of associations and protocol stubs still.
1035 Need to test class associations (rather than just instance associations).
1036 Need to handle deleteInstance().
1037 (MEB)
|
1038 mike 1.26
|
1039 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1040
|
1041 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1042 AssociationName
|
1043 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1044 pages.
1045
|
1046 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1047 sage 1.31
1048 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1049 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1050 Made cimserver accept the -D flag to eliminate the need for environment
1051 variables.
|
1052 mike 1.32
1053 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1054 References() and ReferenceNames() CIM operations. These only operate
1055 on instances at this time. They will operate on classes soon.
|
1056 kumpf 1.34
1057 19. (Mike Glantz) Extended and modified dynamic support
1058 changes to (1) work on HP-UX and (2) have all images and libraries
1059 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1060 change is to program.mak and library-unix.mak, removing specific
1061 lists of dynamic library specs and putting them in the Makefile
1062 and libraries.mak files that build the actual targets (lots of
1063 these now have DYNAMIC_LIBRARIES defined).
|
1064 karl 1.35
1065 20. (Karl) added basic Queue function to common (based on array) and added
1066 tests for stack and queue.
|
1067 karl 1.38
1068 ------------------------------------------------------------------------------
1069 --
|
1070 mike 1.36
|
1071 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1072 karl 1.11
|
1073 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1074 CIMServer (both)
|
1075 karl 1.11 Functions added include:
1076 a. Enable trace to log file.
|
1077 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1078 is
|
1079 karl 1.11 trace to log, -t is trace to console).
1080 c. add parameter in optionsrow for help message and enable the capture
|
1081 karl 1.12 of these messages in Options class. Also added help print that
1082 prints these things out. However, format not to beautiful.
|
1083 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1084 e. Extend the Clients\testclient so he does tests on Namespace.
|
1085 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1086 mike 1.33
|
1087 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1088 mike 1.33
|
1089 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1090 logs
|
1091 karl 1.12 are put
|
1092 mike 1.33
|
1093 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1094 This is a preliminary version.
|
1095 mike 1.33
|
1096 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1097 karl 1.13 throws CannotBind exception.
|
1098 mike 1.33
|
1099 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1100 not
|
1101 karl 1.14 print out all of the message. At the least it prints out the error message
1102 and components of the message causing the problem.
|
1103 mike 1.33
|
1104 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1105 mike 1.33
|
1106 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1107 karl 1.14 existed.
|
1108 mike 1.33
1109 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1110 karl 1.15
|
1111 karl 1.29 ------------------------------------------------------------------------------
1112 --
|
1113 karl 1.6 Version 0.97.2
1114
1115 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1116 2. Extend Formatter for Boolean and Uint32 types.
1117 3. Change CIM Server to use Trace (-t) flag. This also changed
1118 Handler.h to work off of flag.
1119 4. Minor corrections to __Namespace Provider.
1120 5. Extend tests for Formatter, String, and other modules.
1121 6. Correct errors in documentation.
1122 7. New working papers (provider interface).
|
1123 karl 1.8 8. Add Providerreg.exe tool.
1124 9. Add trace output for messages sent from the Server.
|
1125 mike 1.26
|
1126 karl 1.29 ------------------------------------------------------------------------------
1127 --
|
1128 mike 1.26
|
1129 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1130 karl 1.5
|
1131 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1132 find functions. Note: This symbol is defined in config.h. (ks).
1133
|
1134 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1135 of dynamic lib loaading.
|
1136 karl 1.1
1137
|
1138 karl 1.29 ------------------------------------------------------------------------------
1139 --
|
1140 mike 1.26
|
1141 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1142 karl 1.1
1143 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1144 qualifiers, methods.
1145 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1146 methods.
1147 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1148 qualifiers and to
1149 remove qualifiers.
1150 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1151 compiler. It probably imposed more limitations than would be required with
|
1152 karl 1.2 the current compiler. This version of the port produces an excessively large
1153 common module due to template bloat. That problem will be fixed in a future
1154 change to the port. Also there are a log of duplicate symbol warnings generate
1155 by the AIC compiler but these cause no problems. The port has been tested
1156 with the complete unit test and client/server test successfully.
|
1157 karl 1.1
1158 --------------------------------------------------------------------------
|
1159 karl 1.2
|
1160 mike 1.4 23 May 2001
|
1161 karl 1.1
|
1162 mike 1.9 1. Ported to HPUX
|
1163 karl 1.5
|
1164 mike 1.9 --------------------------------------------------------------------------
1165
1166 29 May 2001
1167
1168 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1169 mike 1.51
1170
1171
1172
|
1173 karl 1.48
|
1174 karl 1.38
|
1175 karl 1.30
|
1176 karl 1.29
|
1177 mike 1.10
|