1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 mary 1.82 27. (Mary Hinton) 16 March 2002 - fixed the CIMServer so that it could once
285 again be installed as a Windows service. The repositoryRootPath could
286 not be found, because the pegasusHome variable was not being set properly
287 in the Windows service work thread.
288
|
289 karl 1.59 -------------------------------------------------------------------
|
290 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
291
292 1. Merged back to Main branch. All general development will be in main branch
293 in the future with releases in side branches. Special side developments
294 may temporarily be in side branches.
295 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
296 karl 1.53
297 2. (Karl) 18 December 2001 - Added new directory repositories where repository
298 implementations will be kept to separate them from the
299 repository interface defintion. Initial implementation is genericfile
300 which is the current file based repository.
301
302 Added new build variable RMREPOSITORY which is a generic MAKE command
303 to remove an existing repository. It simply substitutes for the RMDIRHIER
304 command at this point but we will make this a generic part of system
305 in the future.
|
306 karl 1.52
|
307 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
308 to check that all required parameters for intrinsic methods are
309 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
310 exception is thrown. Also added checks for duplicate parameters in the
311 intrinsic methods. If a parameter is specified more than once, a
312 CIM_ERR_INVALID_PARAMETER exception is thrown.
313
|
314 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
315 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
316 queue to this new queue. Modified CIMServer.cpp to create
317 CIMOperationRequestAuthorizer queue only when authorization is enabled.
318 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
319 it available to the CIMOperationRequestDispatcher.
320
|
321 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
322 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
323 forever. The problem was noticed when the TestClient program and CIMserver
324 service were both running. The service wasn't accessible to the TestClient
325 program.
326
|
327 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
328 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
329 in new queue, IndicationService which will get invoked from dispatcher.
330 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
331 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
332 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
333 CIM_GET_INSTANCE_REQUEST_MESSAGE
334 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
335 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
336
337 This new service will also take care of processing the indications on receiving
338 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
339 IndicationProvider or some other mechanism which is not yet clear.
340
341 IndicationService will also receive following messages from PG_ProviderRegistration
342 when a new IndicationProvider will get registered.
343 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
344 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
345
346 I had also defined new Indication Provider APIs, enableIndication, disableIndication
347 and modifyIndication with more parameters passed and eventually planning to terminate
348 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
349 plan to implement one more call as startIndication and will be done soon.
350
351 There are three new test programs in IndicationService directory, which will create
352 Filter, Indication and Subscription instances using IndicationService.
353
354 Also modified sample IndicationProvider code with the new APIs introduced.
|
355 mary 1.56
|
356 karl 1.52 -------------------------------------------------------------------------
|
357 karl 1.1
|
358 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
359 current working dev branch of build
|
360 mike 1.36
|
361 karl 1.49 ---------------------------------------------------------------------------
362 Version 1.1 - July 2001 Development branch (Work in PRogress)
363
|
364 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
365 PARAMETER.REFERENCE constructs for references).
366
367 2. (Mike Brasher) Reworked server communication into new module scheme.
|
368 mike 1.51 =======
369 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
370 seen as part of CGIclient class displays.
371
372 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
373 to the final version in Schemas\CIM25. This included minor
374 corrections, etc and a couple of file changes. This is the
375 official final CIM 25 schema relesed by the DMTF. This change
376 should not affect any current work.
377 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
378 directorys. Note however that today the make repository still
379 loads the 2.5 schema.
380
381 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
382 on XML output.
383
384 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
385 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
386 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
387 declarations in for loop initializers outside the loop, so multiple
388 "for (int i=0; i<10; i++);" statements cause a compile error.
389 mike 1.51
390 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
391 dependency on the config files at the start of the cimserver. Now the
392 cimserver will use in-memory default values in the absence of config files
393 and command line options. Fixed a few defects in the config framework that
394 were causing cimom to crash under certain conditions. Changed the config
395 provider class name to 'PG_ConfigSetting' in the mof file and modified
396 provider implementation files accordingly. Also modified the config CLI
397 to show user friendly error/status messages.
398
399 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
400 (reported incorrect line number on error in XML request if input redirected).
401 Enhanced the -d debug command line option to allow more flexibility in
402 generating debug output.
403
404 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
405 xml when it generates xml output.
406
407 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
408 a common file to reduce the number of files required by the default
409 repository implementation.
410 mike 1.51
411 10. (Mike Brasher) - Fixed minor bug in repository implementation.
412
413 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
414
415 12. (Mike Brasher) - Committed rework of server into queue approach.
416
417 13. (Mike Brasher) - New webserver and webclient examples.
418
419 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
420
421 15. (Mike Brasher) - Initial work on refactorying client into modules.
422 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
423
424 16. (Mike Brasher) - queue-based clients now complete.
425
426 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
427
428 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
429
430 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
431 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
432 a web server. See doc/Servlet for more information.
433
434 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
435 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
436 input and output can be written in a trace file.
437
438 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
439 Created new class SignalHandler that allow registration, activation and
440 deactivation of signal handler functions (Linux only !).
441
442 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
443 ExportClient to support ExportIndication. DisplayConsumer, a sample
444 consumer is added which will consume (by displaying on screen) the
445 indication exported by CIMExportRequestDispatcher. This complete
446 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
447 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
448 are modified to implement above messages.
449
450 XmlIndicationDispatcher test program is modified to test complete
451 operation. It now creates a consumer, handler and indication
452 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
453 indication to consumer. This program needs
454 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
455 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
456 in the repository to complete the test successfully. This test
457 program also needs Handler qualifier defined in repository and
458 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
459 below:
460
461 //====================================================================
462 // CIM_IndicationHandlerXMLHTTP
463 //====================================================================
464 [Description (
465 "CIM_IndicationHandlerXMLHTTP describes the destination for "
466 "Indications to be delivered via HTTP, using a cimXML "
467 "representation."), Handler ("CIMxmlIndicationHandler") ]
468
469 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
470 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
471 a provider library.
472
473 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
474 interface for the provider. InvokeMethod currently uses CIMValue as
475 type for inParameters and outParameters, which are unable to give
476 information about param name, type and value. This should be changed
477 to CIMParamValue which will help providers to know details of the
478 parameter name and type along with value passed through InvoleMethod
479 call. Current implementation uses CIMParamValue as parameters while
480 travelling through message queues and converts it back to array of
481 CIMValue before calling Provider API (which needs to be changed
482 later).
483
484 Also added are two test programs:
485
486 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
487 CIMParamValue class.
488
489 src/Pegasus/Client/tests/InvokeMethod - which makes call to
490 InvokeMethod and displays the return value. Current
491 implementation assumes that provider had returned true value
492 and outParameters (which are now hard coded in
493 CIMOperationRequestDispatcher to implement functionality)
494 mike 1.51 which are passed as response of InvokeMethod to client.
495
496 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
497 authentication to the pegasus code. Created an Authentication Manager
498 and authenticator interfaces. The file based local authentication
499 module has been modified to implement the local authenticator
500 interface, to generate the challenge for the unauthorized requests
501 and to verify the authentication.
502
503 A skeleton program has been created for the Basic Authenticator.
504 This code is in the Security/Authentication directory which is not
505 yet linked into the build.
506
507 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
508 Decoders. Earlier decoders were sending requests and responses
509 before finishing complete Xml parse. This was prone to send
510 request/response even the Xml is wrong after the MethodCall.
511 New changes collects the Message* as return value from the
512 appropriate functions while parsing the Xml and sends on
513 _outputQueue only when Xml is parsed successfully.
514
515 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
516 fix the problem with constructing provider name and loading the
517 providers for unix platforms. Also moved the shared library name
518 construction (appending .sl or .so) from
519 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
520 ProviderModule.cpp and included it in a method that returns
521 provider file path name.
522
523 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
524 Handler. This handler extracts MappingStrings qualifier from class
525 definition and converts it into SNMP specific trap data. The trap
526 structure is defined in a abstract class in snmpDeliverTrap.h file.
527 Every one has his or her own SNMP agent, which will talk with master
528 agent to deliver the trap or may have some other mechanism.
529 Extending snmpDeliverTrap class and deliverTrap method will help to
530 implement specific trap delivery mechanism.
531
532 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
533 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
534 property value to be default in the plan file, remove the property from the
535 plan file. Converted ConfigSettingProvider to use provider2 library.
536 mike 1.51
537 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
538 to allow tracing of a specific number of bytes in a given
539 string. Also modified the XmlIO trace code to use the new interface.
540 Changed the config file defaults for tracing.
541
542 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
543 NonStop platform (NSK) in directory pegasus/mak. The following files
544 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
545 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
546 program-unix.mak. The original program.mak which previously covered
547 all platforms was split into platform-specific make files, and now
548 only contains conditionals. Files config.mak, objects.mak, and
549 library.mak were changed to include the NSK files.
550 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
551
552 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
553 commas (,) in the string values of key properties.
554
555 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
556
557 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
558 pegasus/mak/program-windows.mak that prevented program builds for
559 the windows platform (related to change from 28 Oct). Replaced
560 leading whitespace in front of commands with tabs as required
561 in make files.
562
563 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
564 because getting an error in 26
565
566 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
567 whose types are references. These reference values must be
568 treated specially in the XML encoding, using the VALUE.REFERENCE
569 tag structure.
570
571 Pegasus had been passing reference values simply as String values.
572 For example, EnumerateInstanceNames returned KEYVALUEs of string
573 type rather than VALUE.REFERENCEs.
574
575 I've modified the XmlReader::getKeyBindingElement() and
576 CIMReference::instanceNameToXml() methods to read and write the
577 XML in the proper format. However, making that change required
578 mike 1.51 that a CIMReference object be able to distinguish between a key
579 of String type and a key of reference type.
580
581 I've modified the String format of CIMReferences slightly to
582 allow efficient processing of references whose keys are also of
583 reference type. The "official" form uses the same encoding for
584 key values of String type and of reference type, and so it
585 would be necessary to retrieve the class definition and look up
586 the types of the key properties to determine how to treat the
587 key values. This is clearly too inefficient for internal
588 transformations between CIMReferences and String values.
589
590 The workaround is to encode a 'R' at the beginning of the value
591 for a key of reference type (before the opening '"'). This allows
592 the parser to know a priori whether the key is of String or
593 reference type.
594
595 In this example:
596
597 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
598
599 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
600 the usual encoding. Key2 is a reference property, so the extra 'R'
601 is inserted before its encoded value. Note that this algorithm is
602 recursive, such that RefClass could include KeyC of reference type,
603 which would also get encoded with the 'R' notation.
604
605 The toString() method inserts the 'R' to provide symmetry. A new
606 KeyBinding type (REFERENCE) has been defined to denote keys in a
607 CIMReference that are of reference type. This KeyBinding type must
608 be used appropriately for CIMReference::ttoString() to behave
609 correctly.
610
611 The files that have been modified to make this change are
612 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
613
614 A result of this change is that instances names in the instance
615 repository will include this extra 'R' character. Thus, you will
616 need to repopulate your repository when you download the latest
617 CIMOM version.
618
619 Note that for user-facing uses of the String encoding of instance
620 mike 1.51 names (such as might appear in MOF for static association
621 instances or in the CGI client), this solution is non-standard and
622 therefore unacceptable. It is likely that these points will need
623 to process the more expensive operation of retrieving the class
624 definition to determine the key property types.
625
626 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
627 in case of error in setting trace components. Modified the property owner
628 init and update methods. Submitted the pegasus/mak/Buildmakefile with
629 cleanbuild, rebuild and trace configuration options.
630
631 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
632 (instanceName).
633
634 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
635 GetProperty/SetProperty/EnumerateInstances request/response messages.
636 Added encoding and decoding of PropertyList parameters on all
637 relevant intrinsic methods.
638
639 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
640 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
641 mike 1.51
642 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
643 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
644 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
645 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
646 SystemNsk.cpp) contain stubs. The associated control files
647 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
648 nsk platform links.
649
650 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
651 toString() method for CIMValues of String type. The old behavior
652 returned an XML encoding of the String with special characters
653 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
654 would be returned as a"b. The new behavior just returns the
655 String value directly with no translation. (Note that
656 CIMValue.toXml() may still be used to get the XML-encoded value.)
657
658 This change was necessary in part to correct the behavior of the
659 repository. CreateInstance stores the instance name returned by
660 CIMInstance.getInstanceName(), which is built using calls to
661 CIMValue.toString(). GetInstance searches for the instance name
662 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
663 be successful, CreateInstance must have stored the instance name
664 in that same form, without special character encoding.
665
666 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
667 the CIMValue class. Eliminated improper use of CIMValue.toString(),
668 often replacing with CIMValue.get(String&) or CIMValue.toXml().
669 Also added some error handling in the indication handlers.
670
671 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
672 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
673 to handle local instance path and local classpath. Modified the
674 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
675 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
676
677 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
678 to hold the argument to ModifyInstance and the return values
679 from EnumerateInstances. The client and provider APIs need to
680 be updated to use this class.
681
682 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
683 mike 1.51 source files. This CLI allows addition, modification, removal and listing
684 of CIM users. The CLI is not linked to the main makefile as the Provider
685 functionality is yet to be implemented. Added the function
686 String getPassword(char* prompt) to the System.h and cpp files.
687
688 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
689 the server to challenge the unauthorized requests, authenticate
690 the challenge responses, and verify the subsequent authorized requests.
691 Implemented authentication mechanism on the Client api to send
692 responses to the challenges from the server. Current implementation
693 supports only 'local' authentication mechanism.
694
695 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
696
697 - Changed the return value of EnumerateInstances from Array<CIMInstance>
698 to Array<CIMNamedInstance>
699 - Changed the parameter to ModifyInstance from CIMInstance to
700 CIMNamedInstance
701 - Added an optional PropertyList parameter to ModifyInstance
702 - Changed all handling of PropertyList parameters to use the
703 CIMPropertyList class instead of Array<String>
704 mike 1.51
705 Each of these changes was required to comply with the DMTF specification.
706
707 These changes were made throughout the system except for in the provider
708 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
709 differences from providers, so older providers will continue to function.
710 However, this means that clients can not yet take advantage of the added
711 functionality.
712
713 When the provider API is updated, the following changes will be visible:
714
715 - Providers will get a PropertyList parameter to ModifyInstance which
716 they are required to respect. Providers that can not process the
717 PropertyList must throw a NOT_SUPPORTED exception whenever the
718 list is not null. Clients can take advantage of this change by
719 issuing a ModifyInstance request against a selected set of
720 properties in an instance, rather than being required to replace
721 the entire instance.
722
723 - Providers will be required to return instance names along with
724 instances in the EnumerateInstances method. Clients will receive
725 mike 1.51 these instance names, as the standard dictates.
726
727 - Providers will receive a CIMPropertyList argument containing the
728 PropertyList instead of an Array<String>. This change allows
729 providers to distinguish between an empty list and a null list.
730
731 Note that the repository also does not yet handle the PropertyList in
732 ModifyInstance correctly.
733
734 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
735 provider API to match the changes made to the EnumerateInstances and
736 ModifyInstance operations. These changes were made to comply with
737 the DMTF specification.
738
739 The original Provider API has not been updated, and I have no
740 plans to do so. Providers written to the original API will
741 continue to function, but they will not have the opportunity
742 to take advantage of the features that have been added.
743
744 The significant changes to the Provider2 API are:
745
746 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
747 they are required to respect. Providers that can not process the
748 PropertyList must throw a NOT_SUPPORTED exception whenever the
749 list is not null. Clients can take advantage of this change by
750 issuing a ModifyInstance request against a selected set of
751 properties in an instance, rather than being required to replace
752 the entire instance.
753
754 - Providers will get an IncludeQualifiers parameter to ModifyInstance
755 which they are required to respect. If IncludeQualifiers is
756 false, the qualifiers on the modified instance provided must not
757 be used to update the instance.
758
759 - Providers will be required to return instance names along with
760 instances in the EnumerateInstances method. Clients will receive
761 these instance names, as the standard dictates.
762
763 The providers that are in the Pegasus build have all been updated.
764 However, whenever the PropertyList is not null, the providers throw
765 a NOT_SUPPORTED exception.
766
767 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
768 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
769 the Common module. File Config.h was modified to include the NSK
770 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
771 without the standard (std) namespace.
772
773 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
774 properties to support alternate behavior of the Pegasus repository:
775 repositoryIsDefaultInstanceProvider and repositoryProviderName.
776
777 Using the first one, the repository can be enabled/disabled as the
778 default provider for instance (and association) operations. The default
779 setting is "true", so the default behavior has not been changed. To
780 disable the repository as the default instance provider, issue the
781 following command before starting cimserver:
782
783 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
784
785 The repositoryProviderName configuration property specifies what
786 provider name is used to explicitly register the repository as a
787 provider. This is necessary when the repository needs to serve
788 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
789 to "false". The default value is "repository". To register the
790 repository as an instance provider for a class, add a
791 'Provider("repository")' qualifier to the class definition.
792
793 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
794 pass to providers that act as services. This handle provides
795 service providers with access to the CIMServer data structures.
796
797 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
798 the repository so that it respects the IncludeQualifiers and
799 PropertyList parameters. Updated SetProperty in the repository
800 so that it uses ModifyInstance correctly. The repository now
801 supports GetProperty and SetProperty in addition to ModifyInstance.
802
803 Implemented GetProperty and SetProperty in the Dispatcher and
804 Provider2 so that they get translated to GetInstance and
805 ModifyInstance calls (respectively) in the provider. Providers
806 written to the Provider2 API that correctly process the new
807 ModifyInstance parameters will automatically support SetProperty
808 operations. Note that GetProperty and SetProperty currently only
809 mike 1.51 work for String properties because of an XML encoding limitation.
810
811 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
812 Security components for authentication and authorization.
813
814 Authentication and User Management:
815 cimuser CLI : This CLI is used for addition, modification, removal
816 and listing of CIM Users. The CIM user password is encrypted and stored
817 in a file. The password file format is compatible with Apache's htpasswd
818 generated password file.
819
820 cimauth CLI implement the authorization managment functionality by letting
821 to add/remove/list user authorizations.
822
823 User Manager and User Manager Provider components implement the user
824 management and authorization functionality.
825
826 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
827 under src/Pegasus/WQL which contains library and BNF.
828
829 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
830 mike 1.51 which does provider registration, block, unblock, and stop a provider.
831 It also alert Subscription Service of any provider registration changes.
832
833 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
834 and String.cpp with PEG_min. The _min macro caused problems on the
835 NSK platform because of a duplicate definition in a standard file.
836
837 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
838 subscription service provider that serves as the instance provider for the
839 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
840 classes (from CIM_Events27.mof). The service also takes appropriate action
841 in response to startup, shutdown of the cimom, termination of a provider,
842 or change in provider registration.
843
844 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
845 and the command line interface for shutting down cimom gracefully.
846 For more information, refer to the CIMOM Shutdown working paper
847 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
848
849 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
850 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
851 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
852 constructor to set a pointer to the server-, resp. client wide SSL_Context
853 structure. The Socket field in HTTPConnection is substituted with an
854 MP_Socket pointer, a class that is designed to hide the differences
855 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
856 is defined even in a non-ssl environment.
857 How to use it in a Server or Client:
858 1. Just create an SSL_Context once per Server/Client address space
859 2. Construct every HTTPConnector/Acceptor with a pointer to this
860 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
861 without SSL_Context for conventional connections.
|
862 mike 1.50
|
863 mike 1.51 The Configuration data was extended with the boolean SSL property, and
864 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
865
866 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
867 kumpf 1.61
|
868 mike 1.51 ---------------------------------------------------------------------------
869 Version 1.1 - July 2001 Development branch
870 Tagged as version_1_01 on 3 August 2001 (sorry should have been
871 1.1
872
873 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
874 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
875 and ExportClient classes. the indication.
876
877 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
878 make the delivery of indications over Xml-HTTP and email respectively.
879
880 Provided examples for HandlerTable, XmlIndicationDelivery and
881 SendMailIndicationDelivery to support this implementation.
882
883 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
884 library and a thread-safe message queue (first stage). Classes defined
885 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
886 and SimpleThread.
887
888 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
889 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
890 information on using wbemexec. A simple test script is included. Please
891 see pegasus/src/Clients/wbemexec/tests/readme for information on running
892 the test script.
893
894 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
895 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
896 and
897 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
898 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
899 src/Pegasus/Common/TraceFileHandler.cpp.
900
901 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
902 Config CLI. Please refer to the documentation
903 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
904 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
905 using the config framework and cimconfig CLI. Make sure to load the config
906 mof (src/gmake config) before starting the cimserver. A simple test script
907 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
908 information on running the test script.
909
910 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
911 (changed the H and CPP files for the major CIM objects. These
912 functions generate CIM MOF output for the objects.
913
914 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
915 Authentication provides security mechanism to authenticates CIM clients
916 that
917 connect to CIM Server on the same system without having to specify a
918 password.
919 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
920 This component only works on unix and it's not linked in with the main
921 build.
922 When authentication framework is defined this component may need to be
923 modified to integrate with the framework.
|
924 karl 1.49
925 ---------------------------------------------------------------------------
926 Version 0.99.x (Fixes to version 0.99) in Process
|
927 mike 1.51
|
928 karl 1.49 NOTE: Please do not input anything to this branch except for critical
929 fixes. This is, in effect, 1.0 and we do not want to use it for
930 development.
931
932 ----------------------------------------------------------------------------
933
934 Version 0.98.0 - Work in progress (This number skipped)
|
935 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
936 mike 1.36
|
937 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
938 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
939
|
940 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
941 in the HTML URL reference for passing instance names.
942
|
943 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
944
945 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
946
|
947 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
948 allow slp to compile.
949
|
950 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
951
952 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
953 ids to queue pointers).
954
|
955 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
956 and Dispatcher.
957
|
958 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
959 and
960 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
961 chip 1.44 ResponseHandler for Provider2 interface.
|
962 mike 1.45
963 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
964
965 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
966
|
967 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
968
|
969 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
970
971 12. (Mike Brasher) - Fixed compiler error on Linux.
972
|
973 karl 1.38 ------------------------------------------------------------------------------
974 --
|
975 mike 1.26
|
976 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
977 karl 1.16
978 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
979 for NT and Linux platforms.
|
980 mike 1.26
|
981 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
982 5988.
983 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
984 the DMTF.
|
985 mike 1.26
|
986 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
987 Fusion event. THis included a) extended the test for end of HTTP header from
988 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
989 Extended the HTTP message ID to allow for non-numeric message IDs.
|
990 mike 1.26
|
991 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
992 and created RepositoryDeclContext.{cpp,h}. This is the first step in
993 revamping the compiler to work independently of the repository (grb).
|
994 mike 1.26
|
995 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
996 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
997 Now when you build normally, you will get the committed grammar and parser
998 files instead of generating your own for a particular platform. This should
999 prevent back-level lex and yacc implementations from generating troublesome
1000 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
1001 bob 1.20 (grb)
|
1002 mike 1.26
|
1003 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
1004 This change paves the way for upcoming changes that will allow the compiler
1005 to work indepently of the repository. (grb)
|
1006 mike 1.26
|
1007 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1008 mike 1.26
|
1009 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1010 modifyClass,
|
1011 chip 1.22 createClass to protect caller's object.
|
1012 mike 1.26
|
1013 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1014 directory. These
1015 interfaces allow very smart providers to perform advances operations.
1016 CIMProviderStub has
|
1017 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1018 mike 1.26
|
1019 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1020 mike 1.26
|
1021 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1022 repository you make world, make rebuild or make repository. ks
|
1023 mike 1.26
1024 12. Added associators() and associatorNames() operations to CIM repository.
|
1025 mike 1.27 (MEB)
1026
1027 13. More on association implementation (all four operations supported).
1028 Need to handle deletion of associations and protocol stubs still.
1029 Need to test class associations (rather than just instance associations).
1030 Need to handle deleteInstance().
1031 (MEB)
|
1032 mike 1.26
|
1033 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1034
|
1035 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1036 AssociationName
|
1037 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1038 pages.
1039
|
1040 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1041 sage 1.31
1042 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1043 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1044 Made cimserver accept the -D flag to eliminate the need for environment
1045 variables.
|
1046 mike 1.32
1047 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1048 References() and ReferenceNames() CIM operations. These only operate
1049 on instances at this time. They will operate on classes soon.
|
1050 kumpf 1.34
1051 19. (Mike Glantz) Extended and modified dynamic support
1052 changes to (1) work on HP-UX and (2) have all images and libraries
1053 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1054 change is to program.mak and library-unix.mak, removing specific
1055 lists of dynamic library specs and putting them in the Makefile
1056 and libraries.mak files that build the actual targets (lots of
1057 these now have DYNAMIC_LIBRARIES defined).
|
1058 karl 1.35
1059 20. (Karl) added basic Queue function to common (based on array) and added
1060 tests for stack and queue.
|
1061 karl 1.38
1062 ------------------------------------------------------------------------------
1063 --
|
1064 mike 1.36
|
1065 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1066 karl 1.11
|
1067 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1068 CIMServer (both)
|
1069 karl 1.11 Functions added include:
1070 a. Enable trace to log file.
|
1071 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1072 is
|
1073 karl 1.11 trace to log, -t is trace to console).
1074 c. add parameter in optionsrow for help message and enable the capture
|
1075 karl 1.12 of these messages in Options class. Also added help print that
1076 prints these things out. However, format not to beautiful.
|
1077 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1078 e. Extend the Clients\testclient so he does tests on Namespace.
|
1079 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1080 mike 1.33
|
1081 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1082 mike 1.33
|
1083 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1084 logs
|
1085 karl 1.12 are put
|
1086 mike 1.33
|
1087 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1088 This is a preliminary version.
|
1089 mike 1.33
|
1090 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1091 karl 1.13 throws CannotBind exception.
|
1092 mike 1.33
|
1093 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1094 not
|
1095 karl 1.14 print out all of the message. At the least it prints out the error message
1096 and components of the message causing the problem.
|
1097 mike 1.33
|
1098 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1099 mike 1.33
|
1100 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1101 karl 1.14 existed.
|
1102 mike 1.33
1103 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1104 karl 1.15
|
1105 karl 1.29 ------------------------------------------------------------------------------
1106 --
|
1107 karl 1.6 Version 0.97.2
1108
1109 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1110 2. Extend Formatter for Boolean and Uint32 types.
1111 3. Change CIM Server to use Trace (-t) flag. This also changed
1112 Handler.h to work off of flag.
1113 4. Minor corrections to __Namespace Provider.
1114 5. Extend tests for Formatter, String, and other modules.
1115 6. Correct errors in documentation.
1116 7. New working papers (provider interface).
|
1117 karl 1.8 8. Add Providerreg.exe tool.
1118 9. Add trace output for messages sent from the Server.
|
1119 mike 1.26
|
1120 karl 1.29 ------------------------------------------------------------------------------
1121 --
|
1122 mike 1.26
|
1123 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1124 karl 1.5
|
1125 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1126 find functions. Note: This symbol is defined in config.h. (ks).
1127
|
1128 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1129 of dynamic lib loaading.
|
1130 karl 1.1
1131
|
1132 karl 1.29 ------------------------------------------------------------------------------
1133 --
|
1134 mike 1.26
|
1135 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1136 karl 1.1
1137 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1138 qualifiers, methods.
1139 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1140 methods.
1141 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1142 qualifiers and to
1143 remove qualifiers.
1144 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1145 compiler. It probably imposed more limitations than would be required with
|
1146 karl 1.2 the current compiler. This version of the port produces an excessively large
1147 common module due to template bloat. That problem will be fixed in a future
1148 change to the port. Also there are a log of duplicate symbol warnings generate
1149 by the AIC compiler but these cause no problems. The port has been tested
1150 with the complete unit test and client/server test successfully.
|
1151 karl 1.1
1152 --------------------------------------------------------------------------
|
1153 karl 1.2
|
1154 mike 1.4 23 May 2001
|
1155 karl 1.1
|
1156 mike 1.9 1. Ported to HPUX
|
1157 karl 1.5
|
1158 mike 1.9 --------------------------------------------------------------------------
1159
1160 29 May 2001
1161
1162 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1163 mike 1.51
1164
1165
1166
|
1167 karl 1.48
|
1168 karl 1.38
|
1169 karl 1.30
|
1170 karl 1.29
|
1171 mike 1.10
|