1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.81 25. (Ramnath Ravindran - Compaq) 11 March 2002 - added IPCTru64.h and modified
|
269 ramnath 1.80 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
|
274 ramnath 1.81
275 26. (Ramnath Ravindran - Compaq) 12 March 2002 - modified more files so that
276 Pegasus could build and run on Tru64 unix. Finished replacing instances
277 of ios::binary with the macros PEGASUS_IOS_BINARY and
278 PEGASUS_OR_IOS_BINARY. Also modified some code that dealt with file
279 streams. Tru64 does not support the use of the " != " operator on a
280 fstream object. Instances of such were either modified or an ifdef
281 block detecting a build on Tru64 was used. Added cstdarg and ctime in
282 pegasus/src/stdcxx/cwrappers/ directory.
|
283 ramnath 1.80
|
284 karl 1.59 -------------------------------------------------------------------
|
285 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
286
287 1. Merged back to Main branch. All general development will be in main branch
288 in the future with releases in side branches. Special side developments
289 may temporarily be in side branches.
290 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
291 karl 1.53
292 2. (Karl) 18 December 2001 - Added new directory repositories where repository
293 implementations will be kept to separate them from the
294 repository interface defintion. Initial implementation is genericfile
295 which is the current file based repository.
296
297 Added new build variable RMREPOSITORY which is a generic MAKE command
298 to remove an existing repository. It simply substitutes for the RMDIRHIER
299 command at this point but we will make this a generic part of system
300 in the future.
|
301 karl 1.52
|
302 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
303 to check that all required parameters for intrinsic methods are
304 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
305 exception is thrown. Also added checks for duplicate parameters in the
306 intrinsic methods. If a parameter is specified more than once, a
307 CIM_ERR_INVALID_PARAMETER exception is thrown.
308
|
309 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
310 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
311 queue to this new queue. Modified CIMServer.cpp to create
312 CIMOperationRequestAuthorizer queue only when authorization is enabled.
313 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
314 it available to the CIMOperationRequestDispatcher.
315
|
316 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
317 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
318 forever. The problem was noticed when the TestClient program and CIMserver
319 service were both running. The service wasn't accessible to the TestClient
320 program.
321
|
322 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
323 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
324 in new queue, IndicationService which will get invoked from dispatcher.
325 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
326 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
327 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
328 CIM_GET_INSTANCE_REQUEST_MESSAGE
329 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
330 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
331
332 This new service will also take care of processing the indications on receiving
333 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
334 IndicationProvider or some other mechanism which is not yet clear.
335
336 IndicationService will also receive following messages from PG_ProviderRegistration
337 when a new IndicationProvider will get registered.
338 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
339 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
340
341 I had also defined new Indication Provider APIs, enableIndication, disableIndication
342 and modifyIndication with more parameters passed and eventually planning to terminate
343 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
344 plan to implement one more call as startIndication and will be done soon.
345
346 There are three new test programs in IndicationService directory, which will create
347 Filter, Indication and Subscription instances using IndicationService.
348
349 Also modified sample IndicationProvider code with the new APIs introduced.
|
350 mary 1.56
|
351 karl 1.52 -------------------------------------------------------------------------
|
352 karl 1.1
|
353 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
354 current working dev branch of build
|
355 mike 1.36
|
356 karl 1.49 ---------------------------------------------------------------------------
357 Version 1.1 - July 2001 Development branch (Work in PRogress)
358
|
359 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
360 PARAMETER.REFERENCE constructs for references).
361
362 2. (Mike Brasher) Reworked server communication into new module scheme.
|
363 mike 1.51 =======
364 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
365 seen as part of CGIclient class displays.
366
367 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
368 to the final version in Schemas\CIM25. This included minor
369 corrections, etc and a couple of file changes. This is the
370 official final CIM 25 schema relesed by the DMTF. This change
371 should not affect any current work.
372 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
373 directorys. Note however that today the make repository still
374 loads the 2.5 schema.
375
376 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
377 on XML output.
378
379 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
380 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
381 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
382 declarations in for loop initializers outside the loop, so multiple
383 "for (int i=0; i<10; i++);" statements cause a compile error.
384 mike 1.51
385 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
386 dependency on the config files at the start of the cimserver. Now the
387 cimserver will use in-memory default values in the absence of config files
388 and command line options. Fixed a few defects in the config framework that
389 were causing cimom to crash under certain conditions. Changed the config
390 provider class name to 'PG_ConfigSetting' in the mof file and modified
391 provider implementation files accordingly. Also modified the config CLI
392 to show user friendly error/status messages.
393
394 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
395 (reported incorrect line number on error in XML request if input redirected).
396 Enhanced the -d debug command line option to allow more flexibility in
397 generating debug output.
398
399 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
400 xml when it generates xml output.
401
402 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
403 a common file to reduce the number of files required by the default
404 repository implementation.
405 mike 1.51
406 10. (Mike Brasher) - Fixed minor bug in repository implementation.
407
408 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
409
410 12. (Mike Brasher) - Committed rework of server into queue approach.
411
412 13. (Mike Brasher) - New webserver and webclient examples.
413
414 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
415
416 15. (Mike Brasher) - Initial work on refactorying client into modules.
417 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
418
419 16. (Mike Brasher) - queue-based clients now complete.
420
421 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
422
423 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
424
425 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
426 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
427 a web server. See doc/Servlet for more information.
428
429 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
430 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
431 input and output can be written in a trace file.
432
433 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
434 Created new class SignalHandler that allow registration, activation and
435 deactivation of signal handler functions (Linux only !).
436
437 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
438 ExportClient to support ExportIndication. DisplayConsumer, a sample
439 consumer is added which will consume (by displaying on screen) the
440 indication exported by CIMExportRequestDispatcher. This complete
441 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
442 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
443 are modified to implement above messages.
444
445 XmlIndicationDispatcher test program is modified to test complete
446 operation. It now creates a consumer, handler and indication
447 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
448 indication to consumer. This program needs
449 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
450 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
451 in the repository to complete the test successfully. This test
452 program also needs Handler qualifier defined in repository and
453 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
454 below:
455
456 //====================================================================
457 // CIM_IndicationHandlerXMLHTTP
458 //====================================================================
459 [Description (
460 "CIM_IndicationHandlerXMLHTTP describes the destination for "
461 "Indications to be delivered via HTTP, using a cimXML "
462 "representation."), Handler ("CIMxmlIndicationHandler") ]
463
464 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
465 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
466 a provider library.
467
468 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
469 interface for the provider. InvokeMethod currently uses CIMValue as
470 type for inParameters and outParameters, which are unable to give
471 information about param name, type and value. This should be changed
472 to CIMParamValue which will help providers to know details of the
473 parameter name and type along with value passed through InvoleMethod
474 call. Current implementation uses CIMParamValue as parameters while
475 travelling through message queues and converts it back to array of
476 CIMValue before calling Provider API (which needs to be changed
477 later).
478
479 Also added are two test programs:
480
481 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
482 CIMParamValue class.
483
484 src/Pegasus/Client/tests/InvokeMethod - which makes call to
485 InvokeMethod and displays the return value. Current
486 implementation assumes that provider had returned true value
487 and outParameters (which are now hard coded in
488 CIMOperationRequestDispatcher to implement functionality)
489 mike 1.51 which are passed as response of InvokeMethod to client.
490
491 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
492 authentication to the pegasus code. Created an Authentication Manager
493 and authenticator interfaces. The file based local authentication
494 module has been modified to implement the local authenticator
495 interface, to generate the challenge for the unauthorized requests
496 and to verify the authentication.
497
498 A skeleton program has been created for the Basic Authenticator.
499 This code is in the Security/Authentication directory which is not
500 yet linked into the build.
501
502 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
503 Decoders. Earlier decoders were sending requests and responses
504 before finishing complete Xml parse. This was prone to send
505 request/response even the Xml is wrong after the MethodCall.
506 New changes collects the Message* as return value from the
507 appropriate functions while parsing the Xml and sends on
508 _outputQueue only when Xml is parsed successfully.
509
510 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
511 fix the problem with constructing provider name and loading the
512 providers for unix platforms. Also moved the shared library name
513 construction (appending .sl or .so) from
514 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
515 ProviderModule.cpp and included it in a method that returns
516 provider file path name.
517
518 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
519 Handler. This handler extracts MappingStrings qualifier from class
520 definition and converts it into SNMP specific trap data. The trap
521 structure is defined in a abstract class in snmpDeliverTrap.h file.
522 Every one has his or her own SNMP agent, which will talk with master
523 agent to deliver the trap or may have some other mechanism.
524 Extending snmpDeliverTrap class and deliverTrap method will help to
525 implement specific trap delivery mechanism.
526
527 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
528 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
529 property value to be default in the plan file, remove the property from the
530 plan file. Converted ConfigSettingProvider to use provider2 library.
531 mike 1.51
532 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
533 to allow tracing of a specific number of bytes in a given
534 string. Also modified the XmlIO trace code to use the new interface.
535 Changed the config file defaults for tracing.
536
537 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
538 NonStop platform (NSK) in directory pegasus/mak. The following files
539 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
540 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
541 program-unix.mak. The original program.mak which previously covered
542 all platforms was split into platform-specific make files, and now
543 only contains conditionals. Files config.mak, objects.mak, and
544 library.mak were changed to include the NSK files.
545 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
546
547 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
548 commas (,) in the string values of key properties.
549
550 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
551
552 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
553 pegasus/mak/program-windows.mak that prevented program builds for
554 the windows platform (related to change from 28 Oct). Replaced
555 leading whitespace in front of commands with tabs as required
556 in make files.
557
558 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
559 because getting an error in 26
560
561 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
562 whose types are references. These reference values must be
563 treated specially in the XML encoding, using the VALUE.REFERENCE
564 tag structure.
565
566 Pegasus had been passing reference values simply as String values.
567 For example, EnumerateInstanceNames returned KEYVALUEs of string
568 type rather than VALUE.REFERENCEs.
569
570 I've modified the XmlReader::getKeyBindingElement() and
571 CIMReference::instanceNameToXml() methods to read and write the
572 XML in the proper format. However, making that change required
573 mike 1.51 that a CIMReference object be able to distinguish between a key
574 of String type and a key of reference type.
575
576 I've modified the String format of CIMReferences slightly to
577 allow efficient processing of references whose keys are also of
578 reference type. The "official" form uses the same encoding for
579 key values of String type and of reference type, and so it
580 would be necessary to retrieve the class definition and look up
581 the types of the key properties to determine how to treat the
582 key values. This is clearly too inefficient for internal
583 transformations between CIMReferences and String values.
584
585 The workaround is to encode a 'R' at the beginning of the value
586 for a key of reference type (before the opening '"'). This allows
587 the parser to know a priori whether the key is of String or
588 reference type.
589
590 In this example:
591
592 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
593
594 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
595 the usual encoding. Key2 is a reference property, so the extra 'R'
596 is inserted before its encoded value. Note that this algorithm is
597 recursive, such that RefClass could include KeyC of reference type,
598 which would also get encoded with the 'R' notation.
599
600 The toString() method inserts the 'R' to provide symmetry. A new
601 KeyBinding type (REFERENCE) has been defined to denote keys in a
602 CIMReference that are of reference type. This KeyBinding type must
603 be used appropriately for CIMReference::ttoString() to behave
604 correctly.
605
606 The files that have been modified to make this change are
607 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
608
609 A result of this change is that instances names in the instance
610 repository will include this extra 'R' character. Thus, you will
611 need to repopulate your repository when you download the latest
612 CIMOM version.
613
614 Note that for user-facing uses of the String encoding of instance
615 mike 1.51 names (such as might appear in MOF for static association
616 instances or in the CGI client), this solution is non-standard and
617 therefore unacceptable. It is likely that these points will need
618 to process the more expensive operation of retrieving the class
619 definition to determine the key property types.
620
621 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
622 in case of error in setting trace components. Modified the property owner
623 init and update methods. Submitted the pegasus/mak/Buildmakefile with
624 cleanbuild, rebuild and trace configuration options.
625
626 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
627 (instanceName).
628
629 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
630 GetProperty/SetProperty/EnumerateInstances request/response messages.
631 Added encoding and decoding of PropertyList parameters on all
632 relevant intrinsic methods.
633
634 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
635 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
636 mike 1.51
637 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
638 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
639 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
640 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
641 SystemNsk.cpp) contain stubs. The associated control files
642 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
643 nsk platform links.
644
645 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
646 toString() method for CIMValues of String type. The old behavior
647 returned an XML encoding of the String with special characters
648 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
649 would be returned as a"b. The new behavior just returns the
650 String value directly with no translation. (Note that
651 CIMValue.toXml() may still be used to get the XML-encoded value.)
652
653 This change was necessary in part to correct the behavior of the
654 repository. CreateInstance stores the instance name returned by
655 CIMInstance.getInstanceName(), which is built using calls to
656 CIMValue.toString(). GetInstance searches for the instance name
657 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
658 be successful, CreateInstance must have stored the instance name
659 in that same form, without special character encoding.
660
661 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
662 the CIMValue class. Eliminated improper use of CIMValue.toString(),
663 often replacing with CIMValue.get(String&) or CIMValue.toXml().
664 Also added some error handling in the indication handlers.
665
666 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
667 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
668 to handle local instance path and local classpath. Modified the
669 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
670 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
671
672 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
673 to hold the argument to ModifyInstance and the return values
674 from EnumerateInstances. The client and provider APIs need to
675 be updated to use this class.
676
677 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
678 mike 1.51 source files. This CLI allows addition, modification, removal and listing
679 of CIM users. The CLI is not linked to the main makefile as the Provider
680 functionality is yet to be implemented. Added the function
681 String getPassword(char* prompt) to the System.h and cpp files.
682
683 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
684 the server to challenge the unauthorized requests, authenticate
685 the challenge responses, and verify the subsequent authorized requests.
686 Implemented authentication mechanism on the Client api to send
687 responses to the challenges from the server. Current implementation
688 supports only 'local' authentication mechanism.
689
690 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
691
692 - Changed the return value of EnumerateInstances from Array<CIMInstance>
693 to Array<CIMNamedInstance>
694 - Changed the parameter to ModifyInstance from CIMInstance to
695 CIMNamedInstance
696 - Added an optional PropertyList parameter to ModifyInstance
697 - Changed all handling of PropertyList parameters to use the
698 CIMPropertyList class instead of Array<String>
699 mike 1.51
700 Each of these changes was required to comply with the DMTF specification.
701
702 These changes were made throughout the system except for in the provider
703 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
704 differences from providers, so older providers will continue to function.
705 However, this means that clients can not yet take advantage of the added
706 functionality.
707
708 When the provider API is updated, the following changes will be visible:
709
710 - Providers will get a PropertyList parameter to ModifyInstance which
711 they are required to respect. Providers that can not process the
712 PropertyList must throw a NOT_SUPPORTED exception whenever the
713 list is not null. Clients can take advantage of this change by
714 issuing a ModifyInstance request against a selected set of
715 properties in an instance, rather than being required to replace
716 the entire instance.
717
718 - Providers will be required to return instance names along with
719 instances in the EnumerateInstances method. Clients will receive
720 mike 1.51 these instance names, as the standard dictates.
721
722 - Providers will receive a CIMPropertyList argument containing the
723 PropertyList instead of an Array<String>. This change allows
724 providers to distinguish between an empty list and a null list.
725
726 Note that the repository also does not yet handle the PropertyList in
727 ModifyInstance correctly.
728
729 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
730 provider API to match the changes made to the EnumerateInstances and
731 ModifyInstance operations. These changes were made to comply with
732 the DMTF specification.
733
734 The original Provider API has not been updated, and I have no
735 plans to do so. Providers written to the original API will
736 continue to function, but they will not have the opportunity
737 to take advantage of the features that have been added.
738
739 The significant changes to the Provider2 API are:
740
741 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
742 they are required to respect. Providers that can not process the
743 PropertyList must throw a NOT_SUPPORTED exception whenever the
744 list is not null. Clients can take advantage of this change by
745 issuing a ModifyInstance request against a selected set of
746 properties in an instance, rather than being required to replace
747 the entire instance.
748
749 - Providers will get an IncludeQualifiers parameter to ModifyInstance
750 which they are required to respect. If IncludeQualifiers is
751 false, the qualifiers on the modified instance provided must not
752 be used to update the instance.
753
754 - Providers will be required to return instance names along with
755 instances in the EnumerateInstances method. Clients will receive
756 these instance names, as the standard dictates.
757
758 The providers that are in the Pegasus build have all been updated.
759 However, whenever the PropertyList is not null, the providers throw
760 a NOT_SUPPORTED exception.
761
762 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
763 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
764 the Common module. File Config.h was modified to include the NSK
765 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
766 without the standard (std) namespace.
767
768 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
769 properties to support alternate behavior of the Pegasus repository:
770 repositoryIsDefaultInstanceProvider and repositoryProviderName.
771
772 Using the first one, the repository can be enabled/disabled as the
773 default provider for instance (and association) operations. The default
774 setting is "true", so the default behavior has not been changed. To
775 disable the repository as the default instance provider, issue the
776 following command before starting cimserver:
777
778 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
779
780 The repositoryProviderName configuration property specifies what
781 provider name is used to explicitly register the repository as a
782 provider. This is necessary when the repository needs to serve
783 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
784 to "false". The default value is "repository". To register the
785 repository as an instance provider for a class, add a
786 'Provider("repository")' qualifier to the class definition.
787
788 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
789 pass to providers that act as services. This handle provides
790 service providers with access to the CIMServer data structures.
791
792 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
793 the repository so that it respects the IncludeQualifiers and
794 PropertyList parameters. Updated SetProperty in the repository
795 so that it uses ModifyInstance correctly. The repository now
796 supports GetProperty and SetProperty in addition to ModifyInstance.
797
798 Implemented GetProperty and SetProperty in the Dispatcher and
799 Provider2 so that they get translated to GetInstance and
800 ModifyInstance calls (respectively) in the provider. Providers
801 written to the Provider2 API that correctly process the new
802 ModifyInstance parameters will automatically support SetProperty
803 operations. Note that GetProperty and SetProperty currently only
804 mike 1.51 work for String properties because of an XML encoding limitation.
805
806 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
807 Security components for authentication and authorization.
808
809 Authentication and User Management:
810 cimuser CLI : This CLI is used for addition, modification, removal
811 and listing of CIM Users. The CIM user password is encrypted and stored
812 in a file. The password file format is compatible with Apache's htpasswd
813 generated password file.
814
815 cimauth CLI implement the authorization managment functionality by letting
816 to add/remove/list user authorizations.
817
818 User Manager and User Manager Provider components implement the user
819 management and authorization functionality.
820
821 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
822 under src/Pegasus/WQL which contains library and BNF.
823
824 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
825 mike 1.51 which does provider registration, block, unblock, and stop a provider.
826 It also alert Subscription Service of any provider registration changes.
827
828 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
829 and String.cpp with PEG_min. The _min macro caused problems on the
830 NSK platform because of a duplicate definition in a standard file.
831
832 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
833 subscription service provider that serves as the instance provider for the
834 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
835 classes (from CIM_Events27.mof). The service also takes appropriate action
836 in response to startup, shutdown of the cimom, termination of a provider,
837 or change in provider registration.
838
839 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
840 and the command line interface for shutting down cimom gracefully.
841 For more information, refer to the CIMOM Shutdown working paper
842 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
843
844 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
845 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
846 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
847 constructor to set a pointer to the server-, resp. client wide SSL_Context
848 structure. The Socket field in HTTPConnection is substituted with an
849 MP_Socket pointer, a class that is designed to hide the differences
850 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
851 is defined even in a non-ssl environment.
852 How to use it in a Server or Client:
853 1. Just create an SSL_Context once per Server/Client address space
854 2. Construct every HTTPConnector/Acceptor with a pointer to this
855 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
856 without SSL_Context for conventional connections.
|
857 mike 1.50
|
858 mike 1.51 The Configuration data was extended with the boolean SSL property, and
859 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
860
861 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
862 kumpf 1.61
|
863 mike 1.51 ---------------------------------------------------------------------------
864 Version 1.1 - July 2001 Development branch
865 Tagged as version_1_01 on 3 August 2001 (sorry should have been
866 1.1
867
868 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
869 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
870 and ExportClient classes. the indication.
871
872 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
873 make the delivery of indications over Xml-HTTP and email respectively.
874
875 Provided examples for HandlerTable, XmlIndicationDelivery and
876 SendMailIndicationDelivery to support this implementation.
877
878 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
879 library and a thread-safe message queue (first stage). Classes defined
880 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
881 and SimpleThread.
882
883 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
884 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
885 information on using wbemexec. A simple test script is included. Please
886 see pegasus/src/Clients/wbemexec/tests/readme for information on running
887 the test script.
888
889 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
890 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
891 and
892 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
893 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
894 src/Pegasus/Common/TraceFileHandler.cpp.
895
896 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
897 Config CLI. Please refer to the documentation
898 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
899 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
900 using the config framework and cimconfig CLI. Make sure to load the config
901 mof (src/gmake config) before starting the cimserver. A simple test script
902 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
903 information on running the test script.
904
905 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
906 (changed the H and CPP files for the major CIM objects. These
907 functions generate CIM MOF output for the objects.
908
909 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
910 Authentication provides security mechanism to authenticates CIM clients
911 that
912 connect to CIM Server on the same system without having to specify a
913 password.
914 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
915 This component only works on unix and it's not linked in with the main
916 build.
917 When authentication framework is defined this component may need to be
918 modified to integrate with the framework.
|
919 karl 1.49
920 ---------------------------------------------------------------------------
921 Version 0.99.x (Fixes to version 0.99) in Process
|
922 mike 1.51
|
923 karl 1.49 NOTE: Please do not input anything to this branch except for critical
924 fixes. This is, in effect, 1.0 and we do not want to use it for
925 development.
926
927 ----------------------------------------------------------------------------
928
929 Version 0.98.0 - Work in progress (This number skipped)
|
930 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
931 mike 1.36
|
932 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
933 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
934
|
935 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
936 in the HTML URL reference for passing instance names.
937
|
938 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
939
940 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
941
|
942 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
943 allow slp to compile.
944
|
945 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
946
947 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
948 ids to queue pointers).
949
|
950 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
951 and Dispatcher.
952
|
953 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
954 and
955 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
956 chip 1.44 ResponseHandler for Provider2 interface.
|
957 mike 1.45
958 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
959
960 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
961
|
962 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
963
|
964 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
965
966 12. (Mike Brasher) - Fixed compiler error on Linux.
967
|
968 karl 1.38 ------------------------------------------------------------------------------
969 --
|
970 mike 1.26
|
971 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
972 karl 1.16
973 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
974 for NT and Linux platforms.
|
975 mike 1.26
|
976 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
977 5988.
978 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
979 the DMTF.
|
980 mike 1.26
|
981 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
982 Fusion event. THis included a) extended the test for end of HTTP header from
983 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
984 Extended the HTTP message ID to allow for non-numeric message IDs.
|
985 mike 1.26
|
986 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
987 and created RepositoryDeclContext.{cpp,h}. This is the first step in
988 revamping the compiler to work independently of the repository (grb).
|
989 mike 1.26
|
990 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
991 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
992 Now when you build normally, you will get the committed grammar and parser
993 files instead of generating your own for a particular platform. This should
994 prevent back-level lex and yacc implementations from generating troublesome
995 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
996 bob 1.20 (grb)
|
997 mike 1.26
|
998 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
999 This change paves the way for upcoming changes that will allow the compiler
1000 to work indepently of the repository. (grb)
|
1001 mike 1.26
|
1002 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
1003 mike 1.26
|
1004 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
1005 modifyClass,
|
1006 chip 1.22 createClass to protect caller's object.
|
1007 mike 1.26
|
1008 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1009 directory. These
1010 interfaces allow very smart providers to perform advances operations.
1011 CIMProviderStub has
|
1012 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1013 mike 1.26
|
1014 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1015 mike 1.26
|
1016 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1017 repository you make world, make rebuild or make repository. ks
|
1018 mike 1.26
1019 12. Added associators() and associatorNames() operations to CIM repository.
|
1020 mike 1.27 (MEB)
1021
1022 13. More on association implementation (all four operations supported).
1023 Need to handle deletion of associations and protocol stubs still.
1024 Need to test class associations (rather than just instance associations).
1025 Need to handle deleteInstance().
1026 (MEB)
|
1027 mike 1.26
|
1028 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1029
|
1030 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1031 AssociationName
|
1032 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1033 pages.
1034
|
1035 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1036 sage 1.31
1037 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1038 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1039 Made cimserver accept the -D flag to eliminate the need for environment
1040 variables.
|
1041 mike 1.32
1042 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1043 References() and ReferenceNames() CIM operations. These only operate
1044 on instances at this time. They will operate on classes soon.
|
1045 kumpf 1.34
1046 19. (Mike Glantz) Extended and modified dynamic support
1047 changes to (1) work on HP-UX and (2) have all images and libraries
1048 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1049 change is to program.mak and library-unix.mak, removing specific
1050 lists of dynamic library specs and putting them in the Makefile
1051 and libraries.mak files that build the actual targets (lots of
1052 these now have DYNAMIC_LIBRARIES defined).
|
1053 karl 1.35
1054 20. (Karl) added basic Queue function to common (based on array) and added
1055 tests for stack and queue.
|
1056 karl 1.38
1057 ------------------------------------------------------------------------------
1058 --
|
1059 mike 1.36
|
1060 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1061 karl 1.11
|
1062 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1063 CIMServer (both)
|
1064 karl 1.11 Functions added include:
1065 a. Enable trace to log file.
|
1066 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1067 is
|
1068 karl 1.11 trace to log, -t is trace to console).
1069 c. add parameter in optionsrow for help message and enable the capture
|
1070 karl 1.12 of these messages in Options class. Also added help print that
1071 prints these things out. However, format not to beautiful.
|
1072 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1073 e. Extend the Clients\testclient so he does tests on Namespace.
|
1074 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1075 mike 1.33
|
1076 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1077 mike 1.33
|
1078 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1079 logs
|
1080 karl 1.12 are put
|
1081 mike 1.33
|
1082 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1083 This is a preliminary version.
|
1084 mike 1.33
|
1085 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1086 karl 1.13 throws CannotBind exception.
|
1087 mike 1.33
|
1088 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1089 not
|
1090 karl 1.14 print out all of the message. At the least it prints out the error message
1091 and components of the message causing the problem.
|
1092 mike 1.33
|
1093 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1094 mike 1.33
|
1095 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1096 karl 1.14 existed.
|
1097 mike 1.33
1098 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1099 karl 1.15
|
1100 karl 1.29 ------------------------------------------------------------------------------
1101 --
|
1102 karl 1.6 Version 0.97.2
1103
1104 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1105 2. Extend Formatter for Boolean and Uint32 types.
1106 3. Change CIM Server to use Trace (-t) flag. This also changed
1107 Handler.h to work off of flag.
1108 4. Minor corrections to __Namespace Provider.
1109 5. Extend tests for Formatter, String, and other modules.
1110 6. Correct errors in documentation.
1111 7. New working papers (provider interface).
|
1112 karl 1.8 8. Add Providerreg.exe tool.
1113 9. Add trace output for messages sent from the Server.
|
1114 mike 1.26
|
1115 karl 1.29 ------------------------------------------------------------------------------
1116 --
|
1117 mike 1.26
|
1118 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1119 karl 1.5
|
1120 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1121 find functions. Note: This symbol is defined in config.h. (ks).
1122
|
1123 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1124 of dynamic lib loaading.
|
1125 karl 1.1
1126
|
1127 karl 1.29 ------------------------------------------------------------------------------
1128 --
|
1129 mike 1.26
|
1130 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1131 karl 1.1
1132 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1133 qualifiers, methods.
1134 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1135 methods.
1136 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1137 qualifiers and to
1138 remove qualifiers.
1139 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1140 compiler. It probably imposed more limitations than would be required with
|
1141 karl 1.2 the current compiler. This version of the port produces an excessively large
1142 common module due to template bloat. That problem will be fixed in a future
1143 change to the port. Also there are a log of duplicate symbol warnings generate
1144 by the AIC compiler but these cause no problems. The port has been tested
1145 with the complete unit test and client/server test successfully.
|
1146 karl 1.1
1147 --------------------------------------------------------------------------
|
1148 karl 1.2
|
1149 mike 1.4 23 May 2001
|
1150 karl 1.1
|
1151 mike 1.9 1. Ported to HPUX
|
1152 karl 1.5
|
1153 mike 1.9 --------------------------------------------------------------------------
1154
1155 29 May 2001
1156
1157 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1158 mike 1.51
1159
1160
1161
|
1162 karl 1.48
|
1163 karl 1.38
|
1164 karl 1.30
|
1165 karl 1.29
|
1166 mike 1.10
|