1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 ramnath 1.80 25. (Ramnath Ravindran - Compaq) 8 March 2002 - added IPCTru64.h and modified
269 several files so that Pegasus could build and run on Tru64 unix. Added
270 one macro in ConfigUnix and ConfigWindows (PEGASUS_OR_IOS_BINARY) in
271 the case where std::ios::binary is present with a bitwise OR operator.
272 This macro only works when the std::ios::binary is NOT the first
273 operator to be "OR"ed.
274
|
275 karl 1.59 -------------------------------------------------------------------
|
276 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
277
278 1. Merged back to Main branch. All general development will be in main branch
279 in the future with releases in side branches. Special side developments
280 may temporarily be in side branches.
281 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
282 karl 1.53
283 2. (Karl) 18 December 2001 - Added new directory repositories where repository
284 implementations will be kept to separate them from the
285 repository interface defintion. Initial implementation is genericfile
286 which is the current file based repository.
287
288 Added new build variable RMREPOSITORY which is a generic MAKE command
289 to remove an existing repository. It simply substitutes for the RMDIRHIER
290 command at this point but we will make this a generic part of system
291 in the future.
|
292 karl 1.52
|
293 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
294 to check that all required parameters for intrinsic methods are
295 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
296 exception is thrown. Also added checks for duplicate parameters in the
297 intrinsic methods. If a parameter is specified more than once, a
298 CIM_ERR_INVALID_PARAMETER exception is thrown.
299
|
300 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
301 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
302 queue to this new queue. Modified CIMServer.cpp to create
303 CIMOperationRequestAuthorizer queue only when authorization is enabled.
304 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
305 it available to the CIMOperationRequestDispatcher.
306
|
307 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
308 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
309 forever. The problem was noticed when the TestClient program and CIMserver
310 service were both running. The service wasn't accessible to the TestClient
311 program.
312
|
313 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
314 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
315 in new queue, IndicationService which will get invoked from dispatcher.
316 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
317 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
318 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
319 CIM_GET_INSTANCE_REQUEST_MESSAGE
320 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
321 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
322
323 This new service will also take care of processing the indications on receiving
324 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
325 IndicationProvider or some other mechanism which is not yet clear.
326
327 IndicationService will also receive following messages from PG_ProviderRegistration
328 when a new IndicationProvider will get registered.
329 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
330 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
331
332 I had also defined new Indication Provider APIs, enableIndication, disableIndication
333 and modifyIndication with more parameters passed and eventually planning to terminate
334 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
335 plan to implement one more call as startIndication and will be done soon.
336
337 There are three new test programs in IndicationService directory, which will create
338 Filter, Indication and Subscription instances using IndicationService.
339
340 Also modified sample IndicationProvider code with the new APIs introduced.
|
341 mary 1.56
|
342 karl 1.52 -------------------------------------------------------------------------
|
343 karl 1.1
|
344 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
345 current working dev branch of build
|
346 mike 1.36
|
347 karl 1.49 ---------------------------------------------------------------------------
348 Version 1.1 - July 2001 Development branch (Work in PRogress)
349
|
350 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
351 PARAMETER.REFERENCE constructs for references).
352
353 2. (Mike Brasher) Reworked server communication into new module scheme.
|
354 mike 1.51 =======
355 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
356 seen as part of CGIclient class displays.
357
358 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
359 to the final version in Schemas\CIM25. This included minor
360 corrections, etc and a couple of file changes. This is the
361 official final CIM 25 schema relesed by the DMTF. This change
362 should not affect any current work.
363 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
364 directorys. Note however that today the make repository still
365 loads the 2.5 schema.
366
367 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
368 on XML output.
369
370 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
371 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
372 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
373 declarations in for loop initializers outside the loop, so multiple
374 "for (int i=0; i<10; i++);" statements cause a compile error.
375 mike 1.51
376 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
377 dependency on the config files at the start of the cimserver. Now the
378 cimserver will use in-memory default values in the absence of config files
379 and command line options. Fixed a few defects in the config framework that
380 were causing cimom to crash under certain conditions. Changed the config
381 provider class name to 'PG_ConfigSetting' in the mof file and modified
382 provider implementation files accordingly. Also modified the config CLI
383 to show user friendly error/status messages.
384
385 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
386 (reported incorrect line number on error in XML request if input redirected).
387 Enhanced the -d debug command line option to allow more flexibility in
388 generating debug output.
389
390 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
391 xml when it generates xml output.
392
393 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
394 a common file to reduce the number of files required by the default
395 repository implementation.
396 mike 1.51
397 10. (Mike Brasher) - Fixed minor bug in repository implementation.
398
399 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
400
401 12. (Mike Brasher) - Committed rework of server into queue approach.
402
403 13. (Mike Brasher) - New webserver and webclient examples.
404
405 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
406
407 15. (Mike Brasher) - Initial work on refactorying client into modules.
408 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
409
410 16. (Mike Brasher) - queue-based clients now complete.
411
412 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
413
414 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
415
416 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
417 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
418 a web server. See doc/Servlet for more information.
419
420 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
421 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
422 input and output can be written in a trace file.
423
424 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
425 Created new class SignalHandler that allow registration, activation and
426 deactivation of signal handler functions (Linux only !).
427
428 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
429 ExportClient to support ExportIndication. DisplayConsumer, a sample
430 consumer is added which will consume (by displaying on screen) the
431 indication exported by CIMExportRequestDispatcher. This complete
432 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
433 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
434 are modified to implement above messages.
435
436 XmlIndicationDispatcher test program is modified to test complete
437 operation. It now creates a consumer, handler and indication
438 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
439 indication to consumer. This program needs
440 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
441 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
442 in the repository to complete the test successfully. This test
443 program also needs Handler qualifier defined in repository and
444 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
445 below:
446
447 //====================================================================
448 // CIM_IndicationHandlerXMLHTTP
449 //====================================================================
450 [Description (
451 "CIM_IndicationHandlerXMLHTTP describes the destination for "
452 "Indications to be delivered via HTTP, using a cimXML "
453 "representation."), Handler ("CIMxmlIndicationHandler") ]
454
455 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
456 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
457 a provider library.
458
459 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
460 interface for the provider. InvokeMethod currently uses CIMValue as
461 type for inParameters and outParameters, which are unable to give
462 information about param name, type and value. This should be changed
463 to CIMParamValue which will help providers to know details of the
464 parameter name and type along with value passed through InvoleMethod
465 call. Current implementation uses CIMParamValue as parameters while
466 travelling through message queues and converts it back to array of
467 CIMValue before calling Provider API (which needs to be changed
468 later).
469
470 Also added are two test programs:
471
472 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
473 CIMParamValue class.
474
475 src/Pegasus/Client/tests/InvokeMethod - which makes call to
476 InvokeMethod and displays the return value. Current
477 implementation assumes that provider had returned true value
478 and outParameters (which are now hard coded in
479 CIMOperationRequestDispatcher to implement functionality)
480 mike 1.51 which are passed as response of InvokeMethod to client.
481
482 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
483 authentication to the pegasus code. Created an Authentication Manager
484 and authenticator interfaces. The file based local authentication
485 module has been modified to implement the local authenticator
486 interface, to generate the challenge for the unauthorized requests
487 and to verify the authentication.
488
489 A skeleton program has been created for the Basic Authenticator.
490 This code is in the Security/Authentication directory which is not
491 yet linked into the build.
492
493 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
494 Decoders. Earlier decoders were sending requests and responses
495 before finishing complete Xml parse. This was prone to send
496 request/response even the Xml is wrong after the MethodCall.
497 New changes collects the Message* as return value from the
498 appropriate functions while parsing the Xml and sends on
499 _outputQueue only when Xml is parsed successfully.
500
501 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
502 fix the problem with constructing provider name and loading the
503 providers for unix platforms. Also moved the shared library name
504 construction (appending .sl or .so) from
505 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
506 ProviderModule.cpp and included it in a method that returns
507 provider file path name.
508
509 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
510 Handler. This handler extracts MappingStrings qualifier from class
511 definition and converts it into SNMP specific trap data. The trap
512 structure is defined in a abstract class in snmpDeliverTrap.h file.
513 Every one has his or her own SNMP agent, which will talk with master
514 agent to deliver the trap or may have some other mechanism.
515 Extending snmpDeliverTrap class and deliverTrap method will help to
516 implement specific trap delivery mechanism.
517
518 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
519 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
520 property value to be default in the plan file, remove the property from the
521 plan file. Converted ConfigSettingProvider to use provider2 library.
522 mike 1.51
523 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
524 to allow tracing of a specific number of bytes in a given
525 string. Also modified the XmlIO trace code to use the new interface.
526 Changed the config file defaults for tracing.
527
528 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
529 NonStop platform (NSK) in directory pegasus/mak. The following files
530 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
531 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
532 program-unix.mak. The original program.mak which previously covered
533 all platforms was split into platform-specific make files, and now
534 only contains conditionals. Files config.mak, objects.mak, and
535 library.mak were changed to include the NSK files.
536 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
537
538 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
539 commas (,) in the string values of key properties.
540
541 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
542
543 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
544 pegasus/mak/program-windows.mak that prevented program builds for
545 the windows platform (related to change from 28 Oct). Replaced
546 leading whitespace in front of commands with tabs as required
547 in make files.
548
549 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
550 because getting an error in 26
551
552 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
553 whose types are references. These reference values must be
554 treated specially in the XML encoding, using the VALUE.REFERENCE
555 tag structure.
556
557 Pegasus had been passing reference values simply as String values.
558 For example, EnumerateInstanceNames returned KEYVALUEs of string
559 type rather than VALUE.REFERENCEs.
560
561 I've modified the XmlReader::getKeyBindingElement() and
562 CIMReference::instanceNameToXml() methods to read and write the
563 XML in the proper format. However, making that change required
564 mike 1.51 that a CIMReference object be able to distinguish between a key
565 of String type and a key of reference type.
566
567 I've modified the String format of CIMReferences slightly to
568 allow efficient processing of references whose keys are also of
569 reference type. The "official" form uses the same encoding for
570 key values of String type and of reference type, and so it
571 would be necessary to retrieve the class definition and look up
572 the types of the key properties to determine how to treat the
573 key values. This is clearly too inefficient for internal
574 transformations between CIMReferences and String values.
575
576 The workaround is to encode a 'R' at the beginning of the value
577 for a key of reference type (before the opening '"'). This allows
578 the parser to know a priori whether the key is of String or
579 reference type.
580
581 In this example:
582
583 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
584
585 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
586 the usual encoding. Key2 is a reference property, so the extra 'R'
587 is inserted before its encoded value. Note that this algorithm is
588 recursive, such that RefClass could include KeyC of reference type,
589 which would also get encoded with the 'R' notation.
590
591 The toString() method inserts the 'R' to provide symmetry. A new
592 KeyBinding type (REFERENCE) has been defined to denote keys in a
593 CIMReference that are of reference type. This KeyBinding type must
594 be used appropriately for CIMReference::ttoString() to behave
595 correctly.
596
597 The files that have been modified to make this change are
598 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
599
600 A result of this change is that instances names in the instance
601 repository will include this extra 'R' character. Thus, you will
602 need to repopulate your repository when you download the latest
603 CIMOM version.
604
605 Note that for user-facing uses of the String encoding of instance
606 mike 1.51 names (such as might appear in MOF for static association
607 instances or in the CGI client), this solution is non-standard and
608 therefore unacceptable. It is likely that these points will need
609 to process the more expensive operation of retrieving the class
610 definition to determine the key property types.
611
612 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
613 in case of error in setting trace components. Modified the property owner
614 init and update methods. Submitted the pegasus/mak/Buildmakefile with
615 cleanbuild, rebuild and trace configuration options.
616
617 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
618 (instanceName).
619
620 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
621 GetProperty/SetProperty/EnumerateInstances request/response messages.
622 Added encoding and decoding of PropertyList parameters on all
623 relevant intrinsic methods.
624
625 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
626 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
627 mike 1.51
628 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
629 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
630 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
631 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
632 SystemNsk.cpp) contain stubs. The associated control files
633 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
634 nsk platform links.
635
636 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
637 toString() method for CIMValues of String type. The old behavior
638 returned an XML encoding of the String with special characters
639 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
640 would be returned as a"b. The new behavior just returns the
641 String value directly with no translation. (Note that
642 CIMValue.toXml() may still be used to get the XML-encoded value.)
643
644 This change was necessary in part to correct the behavior of the
645 repository. CreateInstance stores the instance name returned by
646 CIMInstance.getInstanceName(), which is built using calls to
647 CIMValue.toString(). GetInstance searches for the instance name
648 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
649 be successful, CreateInstance must have stored the instance name
650 in that same form, without special character encoding.
651
652 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
653 the CIMValue class. Eliminated improper use of CIMValue.toString(),
654 often replacing with CIMValue.get(String&) or CIMValue.toXml().
655 Also added some error handling in the indication handlers.
656
657 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
658 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
659 to handle local instance path and local classpath. Modified the
660 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
661 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
662
663 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
664 to hold the argument to ModifyInstance and the return values
665 from EnumerateInstances. The client and provider APIs need to
666 be updated to use this class.
667
668 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
669 mike 1.51 source files. This CLI allows addition, modification, removal and listing
670 of CIM users. The CLI is not linked to the main makefile as the Provider
671 functionality is yet to be implemented. Added the function
672 String getPassword(char* prompt) to the System.h and cpp files.
673
674 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
675 the server to challenge the unauthorized requests, authenticate
676 the challenge responses, and verify the subsequent authorized requests.
677 Implemented authentication mechanism on the Client api to send
678 responses to the challenges from the server. Current implementation
679 supports only 'local' authentication mechanism.
680
681 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
682
683 - Changed the return value of EnumerateInstances from Array<CIMInstance>
684 to Array<CIMNamedInstance>
685 - Changed the parameter to ModifyInstance from CIMInstance to
686 CIMNamedInstance
687 - Added an optional PropertyList parameter to ModifyInstance
688 - Changed all handling of PropertyList parameters to use the
689 CIMPropertyList class instead of Array<String>
690 mike 1.51
691 Each of these changes was required to comply with the DMTF specification.
692
693 These changes were made throughout the system except for in the provider
694 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
695 differences from providers, so older providers will continue to function.
696 However, this means that clients can not yet take advantage of the added
697 functionality.
698
699 When the provider API is updated, the following changes will be visible:
700
701 - Providers will get a PropertyList parameter to ModifyInstance which
702 they are required to respect. Providers that can not process the
703 PropertyList must throw a NOT_SUPPORTED exception whenever the
704 list is not null. Clients can take advantage of this change by
705 issuing a ModifyInstance request against a selected set of
706 properties in an instance, rather than being required to replace
707 the entire instance.
708
709 - Providers will be required to return instance names along with
710 instances in the EnumerateInstances method. Clients will receive
711 mike 1.51 these instance names, as the standard dictates.
712
713 - Providers will receive a CIMPropertyList argument containing the
714 PropertyList instead of an Array<String>. This change allows
715 providers to distinguish between an empty list and a null list.
716
717 Note that the repository also does not yet handle the PropertyList in
718 ModifyInstance correctly.
719
720 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
721 provider API to match the changes made to the EnumerateInstances and
722 ModifyInstance operations. These changes were made to comply with
723 the DMTF specification.
724
725 The original Provider API has not been updated, and I have no
726 plans to do so. Providers written to the original API will
727 continue to function, but they will not have the opportunity
728 to take advantage of the features that have been added.
729
730 The significant changes to the Provider2 API are:
731
732 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
733 they are required to respect. Providers that can not process the
734 PropertyList must throw a NOT_SUPPORTED exception whenever the
735 list is not null. Clients can take advantage of this change by
736 issuing a ModifyInstance request against a selected set of
737 properties in an instance, rather than being required to replace
738 the entire instance.
739
740 - Providers will get an IncludeQualifiers parameter to ModifyInstance
741 which they are required to respect. If IncludeQualifiers is
742 false, the qualifiers on the modified instance provided must not
743 be used to update the instance.
744
745 - Providers will be required to return instance names along with
746 instances in the EnumerateInstances method. Clients will receive
747 these instance names, as the standard dictates.
748
749 The providers that are in the Pegasus build have all been updated.
750 However, whenever the PropertyList is not null, the providers throw
751 a NOT_SUPPORTED exception.
752
753 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
754 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
755 the Common module. File Config.h was modified to include the NSK
756 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
757 without the standard (std) namespace.
758
759 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
760 properties to support alternate behavior of the Pegasus repository:
761 repositoryIsDefaultInstanceProvider and repositoryProviderName.
762
763 Using the first one, the repository can be enabled/disabled as the
764 default provider for instance (and association) operations. The default
765 setting is "true", so the default behavior has not been changed. To
766 disable the repository as the default instance provider, issue the
767 following command before starting cimserver:
768
769 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
770
771 The repositoryProviderName configuration property specifies what
772 provider name is used to explicitly register the repository as a
773 provider. This is necessary when the repository needs to serve
774 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
775 to "false". The default value is "repository". To register the
776 repository as an instance provider for a class, add a
777 'Provider("repository")' qualifier to the class definition.
778
779 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
780 pass to providers that act as services. This handle provides
781 service providers with access to the CIMServer data structures.
782
783 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
784 the repository so that it respects the IncludeQualifiers and
785 PropertyList parameters. Updated SetProperty in the repository
786 so that it uses ModifyInstance correctly. The repository now
787 supports GetProperty and SetProperty in addition to ModifyInstance.
788
789 Implemented GetProperty and SetProperty in the Dispatcher and
790 Provider2 so that they get translated to GetInstance and
791 ModifyInstance calls (respectively) in the provider. Providers
792 written to the Provider2 API that correctly process the new
793 ModifyInstance parameters will automatically support SetProperty
794 operations. Note that GetProperty and SetProperty currently only
795 mike 1.51 work for String properties because of an XML encoding limitation.
796
797 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
798 Security components for authentication and authorization.
799
800 Authentication and User Management:
801 cimuser CLI : This CLI is used for addition, modification, removal
802 and listing of CIM Users. The CIM user password is encrypted and stored
803 in a file. The password file format is compatible with Apache's htpasswd
804 generated password file.
805
806 cimauth CLI implement the authorization managment functionality by letting
807 to add/remove/list user authorizations.
808
809 User Manager and User Manager Provider components implement the user
810 management and authorization functionality.
811
812 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
813 under src/Pegasus/WQL which contains library and BNF.
814
815 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
816 mike 1.51 which does provider registration, block, unblock, and stop a provider.
817 It also alert Subscription Service of any provider registration changes.
818
819 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
820 and String.cpp with PEG_min. The _min macro caused problems on the
821 NSK platform because of a duplicate definition in a standard file.
822
823 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
824 subscription service provider that serves as the instance provider for the
825 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
826 classes (from CIM_Events27.mof). The service also takes appropriate action
827 in response to startup, shutdown of the cimom, termination of a provider,
828 or change in provider registration.
829
830 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
831 and the command line interface for shutting down cimom gracefully.
832 For more information, refer to the CIMOM Shutdown working paper
833 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
834
835 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
836 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
837 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
838 constructor to set a pointer to the server-, resp. client wide SSL_Context
839 structure. The Socket field in HTTPConnection is substituted with an
840 MP_Socket pointer, a class that is designed to hide the differences
841 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
842 is defined even in a non-ssl environment.
843 How to use it in a Server or Client:
844 1. Just create an SSL_Context once per Server/Client address space
845 2. Construct every HTTPConnector/Acceptor with a pointer to this
846 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
847 without SSL_Context for conventional connections.
|
848 mike 1.50
|
849 mike 1.51 The Configuration data was extended with the boolean SSL property, and
850 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
851
852 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
853 kumpf 1.61
|
854 mike 1.51 ---------------------------------------------------------------------------
855 Version 1.1 - July 2001 Development branch
856 Tagged as version_1_01 on 3 August 2001 (sorry should have been
857 1.1
858
859 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
860 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
861 and ExportClient classes. the indication.
862
863 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
864 make the delivery of indications over Xml-HTTP and email respectively.
865
866 Provided examples for HandlerTable, XmlIndicationDelivery and
867 SendMailIndicationDelivery to support this implementation.
868
869 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
870 library and a thread-safe message queue (first stage). Classes defined
871 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
872 and SimpleThread.
873
874 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
875 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
876 information on using wbemexec. A simple test script is included. Please
877 see pegasus/src/Clients/wbemexec/tests/readme for information on running
878 the test script.
879
880 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
881 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
882 and
883 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
884 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
885 src/Pegasus/Common/TraceFileHandler.cpp.
886
887 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
888 Config CLI. Please refer to the documentation
889 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
890 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
891 using the config framework and cimconfig CLI. Make sure to load the config
892 mof (src/gmake config) before starting the cimserver. A simple test script
893 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
894 information on running the test script.
895
896 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
897 (changed the H and CPP files for the major CIM objects. These
898 functions generate CIM MOF output for the objects.
899
900 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
901 Authentication provides security mechanism to authenticates CIM clients
902 that
903 connect to CIM Server on the same system without having to specify a
904 password.
905 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
906 This component only works on unix and it's not linked in with the main
907 build.
908 When authentication framework is defined this component may need to be
909 modified to integrate with the framework.
|
910 karl 1.49
911 ---------------------------------------------------------------------------
912 Version 0.99.x (Fixes to version 0.99) in Process
|
913 mike 1.51
|
914 karl 1.49 NOTE: Please do not input anything to this branch except for critical
915 fixes. This is, in effect, 1.0 and we do not want to use it for
916 development.
917
918 ----------------------------------------------------------------------------
919
920 Version 0.98.0 - Work in progress (This number skipped)
|
921 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
922 mike 1.36
|
923 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
924 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
925
|
926 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
927 in the HTML URL reference for passing instance names.
928
|
929 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
930
931 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
932
|
933 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
934 allow slp to compile.
935
|
936 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
937
938 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
939 ids to queue pointers).
940
|
941 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
942 and Dispatcher.
943
|
944 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
945 and
946 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
947 chip 1.44 ResponseHandler for Provider2 interface.
|
948 mike 1.45
949 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
950
951 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
952
|
953 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
954
|
955 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
956
957 12. (Mike Brasher) - Fixed compiler error on Linux.
958
|
959 karl 1.38 ------------------------------------------------------------------------------
960 --
|
961 mike 1.26
|
962 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
963 karl 1.16
964 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
965 for NT and Linux platforms.
|
966 mike 1.26
|
967 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
968 5988.
969 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
970 the DMTF.
|
971 mike 1.26
|
972 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
973 Fusion event. THis included a) extended the test for end of HTTP header from
974 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
975 Extended the HTTP message ID to allow for non-numeric message IDs.
|
976 mike 1.26
|
977 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
978 and created RepositoryDeclContext.{cpp,h}. This is the first step in
979 revamping the compiler to work independently of the repository (grb).
|
980 mike 1.26
|
981 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
982 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
983 Now when you build normally, you will get the committed grammar and parser
984 files instead of generating your own for a particular platform. This should
985 prevent back-level lex and yacc implementations from generating troublesome
986 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
987 bob 1.20 (grb)
|
988 mike 1.26
|
989 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
990 This change paves the way for upcoming changes that will allow the compiler
991 to work indepently of the repository. (grb)
|
992 mike 1.26
|
993 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
994 mike 1.26
|
995 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
996 modifyClass,
|
997 chip 1.22 createClass to protect caller's object.
|
998 mike 1.26
|
999 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
1000 directory. These
1001 interfaces allow very smart providers to perform advances operations.
1002 CIMProviderStub has
|
1003 chip 1.23 been updated to support the new interfaces. Needs testing.
|
1004 mike 1.26
|
1005 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
1006 mike 1.26
|
1007 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1008 repository you make world, make rebuild or make repository. ks
|
1009 mike 1.26
1010 12. Added associators() and associatorNames() operations to CIM repository.
|
1011 mike 1.27 (MEB)
1012
1013 13. More on association implementation (all four operations supported).
1014 Need to handle deletion of associations and protocol stubs still.
1015 Need to test class associations (rather than just instance associations).
1016 Need to handle deleteInstance().
1017 (MEB)
|
1018 mike 1.26
|
1019 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1020
|
1021 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1022 AssociationName
|
1023 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1024 pages.
1025
|
1026 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1027 sage 1.31
1028 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1029 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1030 Made cimserver accept the -D flag to eliminate the need for environment
1031 variables.
|
1032 mike 1.32
1033 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1034 References() and ReferenceNames() CIM operations. These only operate
1035 on instances at this time. They will operate on classes soon.
|
1036 kumpf 1.34
1037 19. (Mike Glantz) Extended and modified dynamic support
1038 changes to (1) work on HP-UX and (2) have all images and libraries
1039 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1040 change is to program.mak and library-unix.mak, removing specific
1041 lists of dynamic library specs and putting them in the Makefile
1042 and libraries.mak files that build the actual targets (lots of
1043 these now have DYNAMIC_LIBRARIES defined).
|
1044 karl 1.35
1045 20. (Karl) added basic Queue function to common (based on array) and added
1046 tests for stack and queue.
|
1047 karl 1.38
1048 ------------------------------------------------------------------------------
1049 --
|
1050 mike 1.36
|
1051 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1052 karl 1.11
|
1053 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1054 CIMServer (both)
|
1055 karl 1.11 Functions added include:
1056 a. Enable trace to log file.
|
1057 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1058 is
|
1059 karl 1.11 trace to log, -t is trace to console).
1060 c. add parameter in optionsrow for help message and enable the capture
|
1061 karl 1.12 of these messages in Options class. Also added help print that
1062 prints these things out. However, format not to beautiful.
|
1063 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1064 e. Extend the Clients\testclient so he does tests on Namespace.
|
1065 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1066 mike 1.33
|
1067 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1068 mike 1.33
|
1069 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1070 logs
|
1071 karl 1.12 are put
|
1072 mike 1.33
|
1073 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1074 This is a preliminary version.
|
1075 mike 1.33
|
1076 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1077 karl 1.13 throws CannotBind exception.
|
1078 mike 1.33
|
1079 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1080 not
|
1081 karl 1.14 print out all of the message. At the least it prints out the error message
1082 and components of the message causing the problem.
|
1083 mike 1.33
|
1084 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1085 mike 1.33
|
1086 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1087 karl 1.14 existed.
|
1088 mike 1.33
1089 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1090 karl 1.15
|
1091 karl 1.29 ------------------------------------------------------------------------------
1092 --
|
1093 karl 1.6 Version 0.97.2
1094
1095 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1096 2. Extend Formatter for Boolean and Uint32 types.
1097 3. Change CIM Server to use Trace (-t) flag. This also changed
1098 Handler.h to work off of flag.
1099 4. Minor corrections to __Namespace Provider.
1100 5. Extend tests for Formatter, String, and other modules.
1101 6. Correct errors in documentation.
1102 7. New working papers (provider interface).
|
1103 karl 1.8 8. Add Providerreg.exe tool.
1104 9. Add trace output for messages sent from the Server.
|
1105 mike 1.26
|
1106 karl 1.29 ------------------------------------------------------------------------------
1107 --
|
1108 mike 1.26
|
1109 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1110 karl 1.5
|
1111 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1112 find functions. Note: This symbol is defined in config.h. (ks).
1113
|
1114 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1115 of dynamic lib loaading.
|
1116 karl 1.1
1117
|
1118 karl 1.29 ------------------------------------------------------------------------------
1119 --
|
1120 mike 1.26
|
1121 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1122 karl 1.1
1123 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1124 qualifiers, methods.
1125 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1126 methods.
1127 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1128 qualifiers and to
1129 remove qualifiers.
1130 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1131 compiler. It probably imposed more limitations than would be required with
|
1132 karl 1.2 the current compiler. This version of the port produces an excessively large
1133 common module due to template bloat. That problem will be fixed in a future
1134 change to the port. Also there are a log of duplicate symbol warnings generate
1135 by the AIC compiler but these cause no problems. The port has been tested
1136 with the complete unit test and client/server test successfully.
|
1137 karl 1.1
1138 --------------------------------------------------------------------------
|
1139 karl 1.2
|
1140 mike 1.4 23 May 2001
|
1141 karl 1.1
|
1142 mike 1.9 1. Ported to HPUX
|
1143 karl 1.5
|
1144 mike 1.9 --------------------------------------------------------------------------
1145
1146 29 May 2001
1147
1148 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1149 mike 1.51
1150
1151
1152
|
1153 karl 1.48
|
1154 karl 1.38
|
1155 karl 1.30
|
1156 karl 1.29
|
1157 mike 1.10
|