1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
|
208 karl 1.78
|
209 kumpf 1.77 22. (Roger Kumpf - HP) 8 Mar 2002 - Simplified CIMClient API construction.
210 Previously, the client application constructed a client API using:
211
212 Monitor* monitor = new Monitor;
213 HTTPConnector* connector;
214 connector = new HTTPConnector(monitor);
215 Uint32 timeoutMillis = 60 * 1000; // optional
216
217 CIMClient client(monitor, connector, timeoutMillis);
218
219 With this change, the client application now looks like:
220
221 Uint32 timeoutMillis = 60 * 1000; // optional
222
223 CIMClient client(timeoutMillis);
224
225 The old style allowed an SSL context to be specified in the HTTPConnector
226 constructor. It seems that the SSL context is really a property of a
227 connection rather than of the client API. So instead of adding an SSL
228 context parameter to the CIMClient constructor, I added it to the CIMClient
229 connect() method. There are now forms of the connect() method with and
230 kumpf 1.77 without an SSL context. Similar changes were made in the HTTPConnector
231 class to allow specification of an SSL context in the connect() method
232 rather than in the constructor.
233
234 NOTE: Client applications are affected and must be updated with this
235 change. I've already updated all the clients that are checked in and
236 included in the Pegasus build.
|
237 kumpf 1.79
|
238 karl 1.78 23. (KS) 8 March 2002 - Correct error in compiler that caused length field
239 of fixed length arrays to be lost.
|
240 kumpf 1.75
|
241 kumpf 1.79 24. (Jenny Yu - HP) 8 March 2002 - Modified the CIMException class to NOT
242 include the source filename and line number in the exception message.
243 However, for anyone who wishes to include such information in the
244 CIM Exception message, a compile option DEBUG_CIMEXCEPTION can be used
245 for that purpose.
246
247 A couple of changes have been made to the Tracer class:
248
249 - CIMException messages can now be put in a trace file using the Tracer.
250 A new interface has been added to the Tracer to accept a CIMException
251 as input and writes the exception message in the CIMException to the
252 trace file. This message will include the source filename and the
253 line number of the CIMException originator.
254
255 Tracer::traceCIMException(traceComponent, traceLevel, cimException);
256
257 - Strings can now be traced using the Tracer class:
258 A new interface has been added to the Tracer to accept a String as
259 input and writes the String to the trace file.
260
261 (ex.)
262 kumpf 1.79 You can issue the following method call:
263 Tracer::trace(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
264
265 or use the following new macro:
266 PEG_TRACE_STRING(TRC_CONFIG, Tracer::LEVEL2, "Operation Failed.");
267
|
268 karl 1.59 -------------------------------------------------------------------
|
269 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
270
271 1. Merged back to Main branch. All general development will be in main branch
272 in the future with releases in side branches. Special side developments
273 may temporarily be in side branches.
274 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
275 karl 1.53
276 2. (Karl) 18 December 2001 - Added new directory repositories where repository
277 implementations will be kept to separate them from the
278 repository interface defintion. Initial implementation is genericfile
279 which is the current file based repository.
280
281 Added new build variable RMREPOSITORY which is a generic MAKE command
282 to remove an existing repository. It simply substitutes for the RMDIRHIER
283 command at this point but we will make this a generic part of system
284 in the future.
|
285 karl 1.52
|
286 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
287 to check that all required parameters for intrinsic methods are
288 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
289 exception is thrown. Also added checks for duplicate parameters in the
290 intrinsic methods. If a parameter is specified more than once, a
291 CIM_ERR_INVALID_PARAMETER exception is thrown.
292
|
293 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
294 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
295 queue to this new queue. Modified CIMServer.cpp to create
296 CIMOperationRequestAuthorizer queue only when authorization is enabled.
297 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
298 it available to the CIMOperationRequestDispatcher.
299
|
300 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
301 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
302 forever. The problem was noticed when the TestClient program and CIMserver
303 service were both running. The service wasn't accessible to the TestClient
304 program.
305
|
306 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
307 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
308 in new queue, IndicationService which will get invoked from dispatcher.
309 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
310 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
311 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
312 CIM_GET_INSTANCE_REQUEST_MESSAGE
313 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
314 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
315
316 This new service will also take care of processing the indications on receiving
317 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
318 IndicationProvider or some other mechanism which is not yet clear.
319
320 IndicationService will also receive following messages from PG_ProviderRegistration
321 when a new IndicationProvider will get registered.
322 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
323 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
324
325 I had also defined new Indication Provider APIs, enableIndication, disableIndication
326 and modifyIndication with more parameters passed and eventually planning to terminate
327 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
328 plan to implement one more call as startIndication and will be done soon.
329
330 There are three new test programs in IndicationService directory, which will create
331 Filter, Indication and Subscription instances using IndicationService.
332
333 Also modified sample IndicationProvider code with the new APIs introduced.
|
334 mary 1.56
|
335 karl 1.52 -------------------------------------------------------------------------
|
336 karl 1.1
|
337 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
338 current working dev branch of build
|
339 mike 1.36
|
340 karl 1.49 ---------------------------------------------------------------------------
341 Version 1.1 - July 2001 Development branch (Work in PRogress)
342
|
343 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
344 PARAMETER.REFERENCE constructs for references).
345
346 2. (Mike Brasher) Reworked server communication into new module scheme.
|
347 mike 1.51 =======
348 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
349 seen as part of CGIclient class displays.
350
351 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
352 to the final version in Schemas\CIM25. This included minor
353 corrections, etc and a couple of file changes. This is the
354 official final CIM 25 schema relesed by the DMTF. This change
355 should not affect any current work.
356 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
357 directorys. Note however that today the make repository still
358 loads the 2.5 schema.
359
360 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
361 on XML output.
362
363 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
364 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
365 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
366 declarations in for loop initializers outside the loop, so multiple
367 "for (int i=0; i<10; i++);" statements cause a compile error.
368 mike 1.51
369 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
370 dependency on the config files at the start of the cimserver. Now the
371 cimserver will use in-memory default values in the absence of config files
372 and command line options. Fixed a few defects in the config framework that
373 were causing cimom to crash under certain conditions. Changed the config
374 provider class name to 'PG_ConfigSetting' in the mof file and modified
375 provider implementation files accordingly. Also modified the config CLI
376 to show user friendly error/status messages.
377
378 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
379 (reported incorrect line number on error in XML request if input redirected).
380 Enhanced the -d debug command line option to allow more flexibility in
381 generating debug output.
382
383 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
384 xml when it generates xml output.
385
386 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
387 a common file to reduce the number of files required by the default
388 repository implementation.
389 mike 1.51
390 10. (Mike Brasher) - Fixed minor bug in repository implementation.
391
392 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
393
394 12. (Mike Brasher) - Committed rework of server into queue approach.
395
396 13. (Mike Brasher) - New webserver and webclient examples.
397
398 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
399
400 15. (Mike Brasher) - Initial work on refactorying client into modules.
401 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
402
403 16. (Mike Brasher) - queue-based clients now complete.
404
405 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
406
407 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
408
409 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
410 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
411 a web server. See doc/Servlet for more information.
412
413 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
414 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
415 input and output can be written in a trace file.
416
417 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
418 Created new class SignalHandler that allow registration, activation and
419 deactivation of signal handler functions (Linux only !).
420
421 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
422 ExportClient to support ExportIndication. DisplayConsumer, a sample
423 consumer is added which will consume (by displaying on screen) the
424 indication exported by CIMExportRequestDispatcher. This complete
425 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
426 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
427 are modified to implement above messages.
428
429 XmlIndicationDispatcher test program is modified to test complete
430 operation. It now creates a consumer, handler and indication
431 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
432 indication to consumer. This program needs
433 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
434 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
435 in the repository to complete the test successfully. This test
436 program also needs Handler qualifier defined in repository and
437 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
438 below:
439
440 //====================================================================
441 // CIM_IndicationHandlerXMLHTTP
442 //====================================================================
443 [Description (
444 "CIM_IndicationHandlerXMLHTTP describes the destination for "
445 "Indications to be delivered via HTTP, using a cimXML "
446 "representation."), Handler ("CIMxmlIndicationHandler") ]
447
448 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
449 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
450 a provider library.
451
452 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
453 interface for the provider. InvokeMethod currently uses CIMValue as
454 type for inParameters and outParameters, which are unable to give
455 information about param name, type and value. This should be changed
456 to CIMParamValue which will help providers to know details of the
457 parameter name and type along with value passed through InvoleMethod
458 call. Current implementation uses CIMParamValue as parameters while
459 travelling through message queues and converts it back to array of
460 CIMValue before calling Provider API (which needs to be changed
461 later).
462
463 Also added are two test programs:
464
465 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
466 CIMParamValue class.
467
468 src/Pegasus/Client/tests/InvokeMethod - which makes call to
469 InvokeMethod and displays the return value. Current
470 implementation assumes that provider had returned true value
471 and outParameters (which are now hard coded in
472 CIMOperationRequestDispatcher to implement functionality)
473 mike 1.51 which are passed as response of InvokeMethod to client.
474
475 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
476 authentication to the pegasus code. Created an Authentication Manager
477 and authenticator interfaces. The file based local authentication
478 module has been modified to implement the local authenticator
479 interface, to generate the challenge for the unauthorized requests
480 and to verify the authentication.
481
482 A skeleton program has been created for the Basic Authenticator.
483 This code is in the Security/Authentication directory which is not
484 yet linked into the build.
485
486 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
487 Decoders. Earlier decoders were sending requests and responses
488 before finishing complete Xml parse. This was prone to send
489 request/response even the Xml is wrong after the MethodCall.
490 New changes collects the Message* as return value from the
491 appropriate functions while parsing the Xml and sends on
492 _outputQueue only when Xml is parsed successfully.
493
494 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
495 fix the problem with constructing provider name and loading the
496 providers for unix platforms. Also moved the shared library name
497 construction (appending .sl or .so) from
498 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
499 ProviderModule.cpp and included it in a method that returns
500 provider file path name.
501
502 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
503 Handler. This handler extracts MappingStrings qualifier from class
504 definition and converts it into SNMP specific trap data. The trap
505 structure is defined in a abstract class in snmpDeliverTrap.h file.
506 Every one has his or her own SNMP agent, which will talk with master
507 agent to deliver the trap or may have some other mechanism.
508 Extending snmpDeliverTrap class and deliverTrap method will help to
509 implement specific trap delivery mechanism.
510
511 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
512 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
513 property value to be default in the plan file, remove the property from the
514 plan file. Converted ConfigSettingProvider to use provider2 library.
515 mike 1.51
516 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
517 to allow tracing of a specific number of bytes in a given
518 string. Also modified the XmlIO trace code to use the new interface.
519 Changed the config file defaults for tracing.
520
521 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
522 NonStop platform (NSK) in directory pegasus/mak. The following files
523 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
524 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
525 program-unix.mak. The original program.mak which previously covered
526 all platforms was split into platform-specific make files, and now
527 only contains conditionals. Files config.mak, objects.mak, and
528 library.mak were changed to include the NSK files.
529 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
530
531 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
532 commas (,) in the string values of key properties.
533
534 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
535
536 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
537 pegasus/mak/program-windows.mak that prevented program builds for
538 the windows platform (related to change from 28 Oct). Replaced
539 leading whitespace in front of commands with tabs as required
540 in make files.
541
542 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
543 because getting an error in 26
544
545 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
546 whose types are references. These reference values must be
547 treated specially in the XML encoding, using the VALUE.REFERENCE
548 tag structure.
549
550 Pegasus had been passing reference values simply as String values.
551 For example, EnumerateInstanceNames returned KEYVALUEs of string
552 type rather than VALUE.REFERENCEs.
553
554 I've modified the XmlReader::getKeyBindingElement() and
555 CIMReference::instanceNameToXml() methods to read and write the
556 XML in the proper format. However, making that change required
557 mike 1.51 that a CIMReference object be able to distinguish between a key
558 of String type and a key of reference type.
559
560 I've modified the String format of CIMReferences slightly to
561 allow efficient processing of references whose keys are also of
562 reference type. The "official" form uses the same encoding for
563 key values of String type and of reference type, and so it
564 would be necessary to retrieve the class definition and look up
565 the types of the key properties to determine how to treat the
566 key values. This is clearly too inefficient for internal
567 transformations between CIMReferences and String values.
568
569 The workaround is to encode a 'R' at the beginning of the value
570 for a key of reference type (before the opening '"'). This allows
571 the parser to know a priori whether the key is of String or
572 reference type.
573
574 In this example:
575
576 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
577
578 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
579 the usual encoding. Key2 is a reference property, so the extra 'R'
580 is inserted before its encoded value. Note that this algorithm is
581 recursive, such that RefClass could include KeyC of reference type,
582 which would also get encoded with the 'R' notation.
583
584 The toString() method inserts the 'R' to provide symmetry. A new
585 KeyBinding type (REFERENCE) has been defined to denote keys in a
586 CIMReference that are of reference type. This KeyBinding type must
587 be used appropriately for CIMReference::ttoString() to behave
588 correctly.
589
590 The files that have been modified to make this change are
591 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
592
593 A result of this change is that instances names in the instance
594 repository will include this extra 'R' character. Thus, you will
595 need to repopulate your repository when you download the latest
596 CIMOM version.
597
598 Note that for user-facing uses of the String encoding of instance
599 mike 1.51 names (such as might appear in MOF for static association
600 instances or in the CGI client), this solution is non-standard and
601 therefore unacceptable. It is likely that these points will need
602 to process the more expensive operation of retrieving the class
603 definition to determine the key property types.
604
605 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
606 in case of error in setting trace components. Modified the property owner
607 init and update methods. Submitted the pegasus/mak/Buildmakefile with
608 cleanbuild, rebuild and trace configuration options.
609
610 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
611 (instanceName).
612
613 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
614 GetProperty/SetProperty/EnumerateInstances request/response messages.
615 Added encoding and decoding of PropertyList parameters on all
616 relevant intrinsic methods.
617
618 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
619 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
620 mike 1.51
621 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
622 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
623 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
624 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
625 SystemNsk.cpp) contain stubs. The associated control files
626 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
627 nsk platform links.
628
629 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
630 toString() method for CIMValues of String type. The old behavior
631 returned an XML encoding of the String with special characters
632 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
633 would be returned as a"b. The new behavior just returns the
634 String value directly with no translation. (Note that
635 CIMValue.toXml() may still be used to get the XML-encoded value.)
636
637 This change was necessary in part to correct the behavior of the
638 repository. CreateInstance stores the instance name returned by
639 CIMInstance.getInstanceName(), which is built using calls to
640 CIMValue.toString(). GetInstance searches for the instance name
641 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
642 be successful, CreateInstance must have stored the instance name
643 in that same form, without special character encoding.
644
645 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
646 the CIMValue class. Eliminated improper use of CIMValue.toString(),
647 often replacing with CIMValue.get(String&) or CIMValue.toXml().
648 Also added some error handling in the indication handlers.
649
650 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
651 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
652 to handle local instance path and local classpath. Modified the
653 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
654 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
655
656 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
657 to hold the argument to ModifyInstance and the return values
658 from EnumerateInstances. The client and provider APIs need to
659 be updated to use this class.
660
661 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
662 mike 1.51 source files. This CLI allows addition, modification, removal and listing
663 of CIM users. The CLI is not linked to the main makefile as the Provider
664 functionality is yet to be implemented. Added the function
665 String getPassword(char* prompt) to the System.h and cpp files.
666
667 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
668 the server to challenge the unauthorized requests, authenticate
669 the challenge responses, and verify the subsequent authorized requests.
670 Implemented authentication mechanism on the Client api to send
671 responses to the challenges from the server. Current implementation
672 supports only 'local' authentication mechanism.
673
674 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
675
676 - Changed the return value of EnumerateInstances from Array<CIMInstance>
677 to Array<CIMNamedInstance>
678 - Changed the parameter to ModifyInstance from CIMInstance to
679 CIMNamedInstance
680 - Added an optional PropertyList parameter to ModifyInstance
681 - Changed all handling of PropertyList parameters to use the
682 CIMPropertyList class instead of Array<String>
683 mike 1.51
684 Each of these changes was required to comply with the DMTF specification.
685
686 These changes were made throughout the system except for in the provider
687 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
688 differences from providers, so older providers will continue to function.
689 However, this means that clients can not yet take advantage of the added
690 functionality.
691
692 When the provider API is updated, the following changes will be visible:
693
694 - Providers will get a PropertyList parameter to ModifyInstance which
695 they are required to respect. Providers that can not process the
696 PropertyList must throw a NOT_SUPPORTED exception whenever the
697 list is not null. Clients can take advantage of this change by
698 issuing a ModifyInstance request against a selected set of
699 properties in an instance, rather than being required to replace
700 the entire instance.
701
702 - Providers will be required to return instance names along with
703 instances in the EnumerateInstances method. Clients will receive
704 mike 1.51 these instance names, as the standard dictates.
705
706 - Providers will receive a CIMPropertyList argument containing the
707 PropertyList instead of an Array<String>. This change allows
708 providers to distinguish between an empty list and a null list.
709
710 Note that the repository also does not yet handle the PropertyList in
711 ModifyInstance correctly.
712
713 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
714 provider API to match the changes made to the EnumerateInstances and
715 ModifyInstance operations. These changes were made to comply with
716 the DMTF specification.
717
718 The original Provider API has not been updated, and I have no
719 plans to do so. Providers written to the original API will
720 continue to function, but they will not have the opportunity
721 to take advantage of the features that have been added.
722
723 The significant changes to the Provider2 API are:
724
725 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
726 they are required to respect. Providers that can not process the
727 PropertyList must throw a NOT_SUPPORTED exception whenever the
728 list is not null. Clients can take advantage of this change by
729 issuing a ModifyInstance request against a selected set of
730 properties in an instance, rather than being required to replace
731 the entire instance.
732
733 - Providers will get an IncludeQualifiers parameter to ModifyInstance
734 which they are required to respect. If IncludeQualifiers is
735 false, the qualifiers on the modified instance provided must not
736 be used to update the instance.
737
738 - Providers will be required to return instance names along with
739 instances in the EnumerateInstances method. Clients will receive
740 these instance names, as the standard dictates.
741
742 The providers that are in the Pegasus build have all been updated.
743 However, whenever the PropertyList is not null, the providers throw
744 a NOT_SUPPORTED exception.
745
746 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
747 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
748 the Common module. File Config.h was modified to include the NSK
749 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
750 without the standard (std) namespace.
751
752 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
753 properties to support alternate behavior of the Pegasus repository:
754 repositoryIsDefaultInstanceProvider and repositoryProviderName.
755
756 Using the first one, the repository can be enabled/disabled as the
757 default provider for instance (and association) operations. The default
758 setting is "true", so the default behavior has not been changed. To
759 disable the repository as the default instance provider, issue the
760 following command before starting cimserver:
761
762 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
763
764 The repositoryProviderName configuration property specifies what
765 provider name is used to explicitly register the repository as a
766 provider. This is necessary when the repository needs to serve
767 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
768 to "false". The default value is "repository". To register the
769 repository as an instance provider for a class, add a
770 'Provider("repository")' qualifier to the class definition.
771
772 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
773 pass to providers that act as services. This handle provides
774 service providers with access to the CIMServer data structures.
775
776 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
777 the repository so that it respects the IncludeQualifiers and
778 PropertyList parameters. Updated SetProperty in the repository
779 so that it uses ModifyInstance correctly. The repository now
780 supports GetProperty and SetProperty in addition to ModifyInstance.
781
782 Implemented GetProperty and SetProperty in the Dispatcher and
783 Provider2 so that they get translated to GetInstance and
784 ModifyInstance calls (respectively) in the provider. Providers
785 written to the Provider2 API that correctly process the new
786 ModifyInstance parameters will automatically support SetProperty
787 operations. Note that GetProperty and SetProperty currently only
788 mike 1.51 work for String properties because of an XML encoding limitation.
789
790 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
791 Security components for authentication and authorization.
792
793 Authentication and User Management:
794 cimuser CLI : This CLI is used for addition, modification, removal
795 and listing of CIM Users. The CIM user password is encrypted and stored
796 in a file. The password file format is compatible with Apache's htpasswd
797 generated password file.
798
799 cimauth CLI implement the authorization managment functionality by letting
800 to add/remove/list user authorizations.
801
802 User Manager and User Manager Provider components implement the user
803 management and authorization functionality.
804
805 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
806 under src/Pegasus/WQL which contains library and BNF.
807
808 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
809 mike 1.51 which does provider registration, block, unblock, and stop a provider.
810 It also alert Subscription Service of any provider registration changes.
811
812 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
813 and String.cpp with PEG_min. The _min macro caused problems on the
814 NSK platform because of a duplicate definition in a standard file.
815
816 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
817 subscription service provider that serves as the instance provider for the
818 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
819 classes (from CIM_Events27.mof). The service also takes appropriate action
820 in response to startup, shutdown of the cimom, termination of a provider,
821 or change in provider registration.
822
823 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
824 and the command line interface for shutting down cimom gracefully.
825 For more information, refer to the CIMOM Shutdown working paper
826 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
827
828 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
829 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
830 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
831 constructor to set a pointer to the server-, resp. client wide SSL_Context
832 structure. The Socket field in HTTPConnection is substituted with an
833 MP_Socket pointer, a class that is designed to hide the differences
834 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
835 is defined even in a non-ssl environment.
836 How to use it in a Server or Client:
837 1. Just create an SSL_Context once per Server/Client address space
838 2. Construct every HTTPConnector/Acceptor with a pointer to this
839 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
840 without SSL_Context for conventional connections.
|
841 mike 1.50
|
842 mike 1.51 The Configuration data was extended with the boolean SSL property, and
843 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
844
845 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
846 kumpf 1.61
|
847 mike 1.51 ---------------------------------------------------------------------------
848 Version 1.1 - July 2001 Development branch
849 Tagged as version_1_01 on 3 August 2001 (sorry should have been
850 1.1
851
852 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
853 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
854 and ExportClient classes. the indication.
855
856 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
857 make the delivery of indications over Xml-HTTP and email respectively.
858
859 Provided examples for HandlerTable, XmlIndicationDelivery and
860 SendMailIndicationDelivery to support this implementation.
861
862 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
863 library and a thread-safe message queue (first stage). Classes defined
864 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
865 and SimpleThread.
866
867 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
868 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
869 information on using wbemexec. A simple test script is included. Please
870 see pegasus/src/Clients/wbemexec/tests/readme for information on running
871 the test script.
872
873 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
874 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
875 and
876 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
877 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
878 src/Pegasus/Common/TraceFileHandler.cpp.
879
880 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
881 Config CLI. Please refer to the documentation
882 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
883 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
884 using the config framework and cimconfig CLI. Make sure to load the config
885 mof (src/gmake config) before starting the cimserver. A simple test script
886 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
887 information on running the test script.
888
889 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
890 (changed the H and CPP files for the major CIM objects. These
891 functions generate CIM MOF output for the objects.
892
893 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
894 Authentication provides security mechanism to authenticates CIM clients
895 that
896 connect to CIM Server on the same system without having to specify a
897 password.
898 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
899 This component only works on unix and it's not linked in with the main
900 build.
901 When authentication framework is defined this component may need to be
902 modified to integrate with the framework.
|
903 karl 1.49
904 ---------------------------------------------------------------------------
905 Version 0.99.x (Fixes to version 0.99) in Process
|
906 mike 1.51
|
907 karl 1.49 NOTE: Please do not input anything to this branch except for critical
908 fixes. This is, in effect, 1.0 and we do not want to use it for
909 development.
910
911 ----------------------------------------------------------------------------
912
913 Version 0.98.0 - Work in progress (This number skipped)
|
914 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
915 mike 1.36
|
916 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
917 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
918
|
919 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
920 in the HTML URL reference for passing instance names.
921
|
922 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
923
924 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
925
|
926 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
927 allow slp to compile.
928
|
929 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
930
931 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
932 ids to queue pointers).
933
|
934 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
935 and Dispatcher.
936
|
937 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
938 and
939 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
940 chip 1.44 ResponseHandler for Provider2 interface.
|
941 mike 1.45
942 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
943
944 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
945
|
946 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
947
|
948 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
949
950 12. (Mike Brasher) - Fixed compiler error on Linux.
951
|
952 karl 1.38 ------------------------------------------------------------------------------
953 --
|
954 mike 1.26
|
955 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
956 karl 1.16
957 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
958 for NT and Linux platforms.
|
959 mike 1.26
|
960 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
961 5988.
962 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
963 the DMTF.
|
964 mike 1.26
|
965 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
966 Fusion event. THis included a) extended the test for end of HTTP header from
967 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
968 Extended the HTTP message ID to allow for non-numeric message IDs.
|
969 mike 1.26
|
970 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
971 and created RepositoryDeclContext.{cpp,h}. This is the first step in
972 revamping the compiler to work independently of the repository (grb).
|
973 mike 1.26
|
974 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
975 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
976 Now when you build normally, you will get the committed grammar and parser
977 files instead of generating your own for a particular platform. This should
978 prevent back-level lex and yacc implementations from generating troublesome
979 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
980 bob 1.20 (grb)
|
981 mike 1.26
|
982 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
983 This change paves the way for upcoming changes that will allow the compiler
984 to work indepently of the repository. (grb)
|
985 mike 1.26
|
986 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
987 mike 1.26
|
988 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
989 modifyClass,
|
990 chip 1.22 createClass to protect caller's object.
|
991 mike 1.26
|
992 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
993 directory. These
994 interfaces allow very smart providers to perform advances operations.
995 CIMProviderStub has
|
996 chip 1.23 been updated to support the new interfaces. Needs testing.
|
997 mike 1.26
|
998 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
999 mike 1.26
|
1000 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
1001 repository you make world, make rebuild or make repository. ks
|
1002 mike 1.26
1003 12. Added associators() and associatorNames() operations to CIM repository.
|
1004 mike 1.27 (MEB)
1005
1006 13. More on association implementation (all four operations supported).
1007 Need to handle deletion of associations and protocol stubs still.
1008 Need to test class associations (rather than just instance associations).
1009 Need to handle deleteInstance().
1010 (MEB)
|
1011 mike 1.26
|
1012 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
1013
|
1014 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
1015 AssociationName
|
1016 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
1017 pages.
1018
|
1019 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
1020 sage 1.31
1021 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
1022 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
1023 Made cimserver accept the -D flag to eliminate the need for environment
1024 variables.
|
1025 mike 1.32
1026 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
1027 References() and ReferenceNames() CIM operations. These only operate
1028 on instances at this time. They will operate on classes soon.
|
1029 kumpf 1.34
1030 19. (Mike Glantz) Extended and modified dynamic support
1031 changes to (1) work on HP-UX and (2) have all images and libraries
1032 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
1033 change is to program.mak and library-unix.mak, removing specific
1034 lists of dynamic library specs and putting them in the Makefile
1035 and libraries.mak files that build the actual targets (lots of
1036 these now have DYNAMIC_LIBRARIES defined).
|
1037 karl 1.35
1038 20. (Karl) added basic Queue function to common (based on array) and added
1039 tests for stack and queue.
|
1040 karl 1.38
1041 ------------------------------------------------------------------------------
1042 --
|
1043 mike 1.36
|
1044 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
1045 karl 1.11
|
1046 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
1047 CIMServer (both)
|
1048 karl 1.11 Functions added include:
1049 a. Enable trace to log file.
|
1050 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
1051 is
|
1052 karl 1.11 trace to log, -t is trace to console).
1053 c. add parameter in optionsrow for help message and enable the capture
|
1054 karl 1.12 of these messages in Options class. Also added help print that
1055 prints these things out. However, format not to beautiful.
|
1056 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
1057 e. Extend the Clients\testclient so he does tests on Namespace.
|
1058 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1059 mike 1.33
|
1060 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1061 mike 1.33
|
1062 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1063 logs
|
1064 karl 1.12 are put
|
1065 mike 1.33
|
1066 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1067 This is a preliminary version.
|
1068 mike 1.33
|
1069 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1070 karl 1.13 throws CannotBind exception.
|
1071 mike 1.33
|
1072 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1073 not
|
1074 karl 1.14 print out all of the message. At the least it prints out the error message
1075 and components of the message causing the problem.
|
1076 mike 1.33
|
1077 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1078 mike 1.33
|
1079 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1080 karl 1.14 existed.
|
1081 mike 1.33
1082 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1083 karl 1.15
|
1084 karl 1.29 ------------------------------------------------------------------------------
1085 --
|
1086 karl 1.6 Version 0.97.2
1087
1088 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1089 2. Extend Formatter for Boolean and Uint32 types.
1090 3. Change CIM Server to use Trace (-t) flag. This also changed
1091 Handler.h to work off of flag.
1092 4. Minor corrections to __Namespace Provider.
1093 5. Extend tests for Formatter, String, and other modules.
1094 6. Correct errors in documentation.
1095 7. New working papers (provider interface).
|
1096 karl 1.8 8. Add Providerreg.exe tool.
1097 9. Add trace output for messages sent from the Server.
|
1098 mike 1.26
|
1099 karl 1.29 ------------------------------------------------------------------------------
1100 --
|
1101 mike 1.26
|
1102 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1103 karl 1.5
|
1104 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1105 find functions. Note: This symbol is defined in config.h. (ks).
1106
|
1107 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1108 of dynamic lib loaading.
|
1109 karl 1.1
1110
|
1111 karl 1.29 ------------------------------------------------------------------------------
1112 --
|
1113 mike 1.26
|
1114 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1115 karl 1.1
1116 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1117 qualifiers, methods.
1118 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1119 methods.
1120 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1121 qualifiers and to
1122 remove qualifiers.
1123 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1124 compiler. It probably imposed more limitations than would be required with
|
1125 karl 1.2 the current compiler. This version of the port produces an excessively large
1126 common module due to template bloat. That problem will be fixed in a future
1127 change to the port. Also there are a log of duplicate symbol warnings generate
1128 by the AIC compiler but these cause no problems. The port has been tested
1129 with the complete unit test and client/server test successfully.
|
1130 karl 1.1
1131 --------------------------------------------------------------------------
|
1132 karl 1.2
|
1133 mike 1.4 23 May 2001
|
1134 karl 1.1
|
1135 mike 1.9 1. Ported to HPUX
|
1136 karl 1.5
|
1137 mike 1.9 --------------------------------------------------------------------------
1138
1139 29 May 2001
1140
1141 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1142 mike 1.51
1143
1144
1145
|
1146 karl 1.48
|
1147 karl 1.38
|
1148 karl 1.30
|
1149 karl 1.29
|
1150 mike 1.10
|