1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 karl 1.76
|
173 kumpf 1.68
|
174 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
175 eliminate many of the redundant memory copies that resulted from the
176 nested method call structure. Now, instead of having a method at
177 each level that adds a begin tag, contents, and an end tag, there
178 are separate methods to add the begin and end tags. At the top
179 level, each of the begin tag methods are called, then the message
180 "body" is added, followed by calls to the end tag methods.
181
182 The message body is currently still copied twice, once into the XML
183 payload and then again when the HTTP header is added. (Since the
184 HTTP header contains a content length field, the header cannot be
185 constructed until the payload is complete.) It is possible to
186 remove these extra copies as well, but that would require additional
187 changes elsewhere in the code. For example, the HTTPMessage class
188 would need to hold the headers and payload separately rather than in
189 a single buffer.
190
191 Along with these changes, I did a lot of cleanup. Much of the XML
192 formatting code has been moved from CIMReference to XmlWriter. Also,
193 error message formatting has been consolidated in XmlWriter from the
194 various encoders and decoders, etc.
195 kumpf 1.75
196 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
197 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
198 that the information in the HTTP headers of a request is consistent
199 with what is encoded in the XML request itself.
200
201 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
202 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
203 validated.
|
204 karl 1.76
205 21. (KS) 7 March 2002 - Correct error in qualifier propagation processing in
206 qualifierlist.resolve. Temporarily remove the DEFAULT setup on the
207 Compiler qualifier generation. Add tests for resolve processing.
208
|
209 kumpf 1.75
|
210 karl 1.59 -------------------------------------------------------------------
|
211 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
212
213 1. Merged back to Main branch. All general development will be in main branch
214 in the future with releases in side branches. Special side developments
215 may temporarily be in side branches.
216 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
217 karl 1.53
218 2. (Karl) 18 December 2001 - Added new directory repositories where repository
219 implementations will be kept to separate them from the
220 repository interface defintion. Initial implementation is genericfile
221 which is the current file based repository.
222
223 Added new build variable RMREPOSITORY which is a generic MAKE command
224 to remove an existing repository. It simply substitutes for the RMDIRHIER
225 command at this point but we will make this a generic part of system
226 in the future.
|
227 karl 1.52
|
228 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
229 to check that all required parameters for intrinsic methods are
230 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
231 exception is thrown. Also added checks for duplicate parameters in the
232 intrinsic methods. If a parameter is specified more than once, a
233 CIM_ERR_INVALID_PARAMETER exception is thrown.
234
|
235 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
236 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
237 queue to this new queue. Modified CIMServer.cpp to create
238 CIMOperationRequestAuthorizer queue only when authorization is enabled.
239 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
240 it available to the CIMOperationRequestDispatcher.
241
|
242 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
243 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
244 forever. The problem was noticed when the TestClient program and CIMserver
245 service were both running. The service wasn't accessible to the TestClient
246 program.
247
|
248 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
249 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
250 in new queue, IndicationService which will get invoked from dispatcher.
251 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
252 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
253 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
254 CIM_GET_INSTANCE_REQUEST_MESSAGE
255 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
256 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
257
258 This new service will also take care of processing the indications on receiving
259 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
260 IndicationProvider or some other mechanism which is not yet clear.
261
262 IndicationService will also receive following messages from PG_ProviderRegistration
263 when a new IndicationProvider will get registered.
264 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
265 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
266
267 I had also defined new Indication Provider APIs, enableIndication, disableIndication
268 and modifyIndication with more parameters passed and eventually planning to terminate
269 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
270 plan to implement one more call as startIndication and will be done soon.
271
272 There are three new test programs in IndicationService directory, which will create
273 Filter, Indication and Subscription instances using IndicationService.
274
275 Also modified sample IndicationProvider code with the new APIs introduced.
|
276 mary 1.56
|
277 karl 1.52 -------------------------------------------------------------------------
|
278 karl 1.1
|
279 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
280 current working dev branch of build
|
281 mike 1.36
|
282 karl 1.49 ---------------------------------------------------------------------------
283 Version 1.1 - July 2001 Development branch (Work in PRogress)
284
|
285 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
286 PARAMETER.REFERENCE constructs for references).
287
288 2. (Mike Brasher) Reworked server communication into new module scheme.
|
289 mike 1.51 =======
290 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
291 seen as part of CGIclient class displays.
292
293 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
294 to the final version in Schemas\CIM25. This included minor
295 corrections, etc and a couple of file changes. This is the
296 official final CIM 25 schema relesed by the DMTF. This change
297 should not affect any current work.
298 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
299 directorys. Note however that today the make repository still
300 loads the 2.5 schema.
301
302 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
303 on XML output.
304
305 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
306 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
307 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
308 declarations in for loop initializers outside the loop, so multiple
309 "for (int i=0; i<10; i++);" statements cause a compile error.
310 mike 1.51
311 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
312 dependency on the config files at the start of the cimserver. Now the
313 cimserver will use in-memory default values in the absence of config files
314 and command line options. Fixed a few defects in the config framework that
315 were causing cimom to crash under certain conditions. Changed the config
316 provider class name to 'PG_ConfigSetting' in the mof file and modified
317 provider implementation files accordingly. Also modified the config CLI
318 to show user friendly error/status messages.
319
320 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
321 (reported incorrect line number on error in XML request if input redirected).
322 Enhanced the -d debug command line option to allow more flexibility in
323 generating debug output.
324
325 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
326 xml when it generates xml output.
327
328 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
329 a common file to reduce the number of files required by the default
330 repository implementation.
331 mike 1.51
332 10. (Mike Brasher) - Fixed minor bug in repository implementation.
333
334 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
335
336 12. (Mike Brasher) - Committed rework of server into queue approach.
337
338 13. (Mike Brasher) - New webserver and webclient examples.
339
340 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
341
342 15. (Mike Brasher) - Initial work on refactorying client into modules.
343 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
344
345 16. (Mike Brasher) - queue-based clients now complete.
346
347 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
348
349 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
350
351 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
352 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
353 a web server. See doc/Servlet for more information.
354
355 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
356 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
357 input and output can be written in a trace file.
358
359 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
360 Created new class SignalHandler that allow registration, activation and
361 deactivation of signal handler functions (Linux only !).
362
363 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
364 ExportClient to support ExportIndication. DisplayConsumer, a sample
365 consumer is added which will consume (by displaying on screen) the
366 indication exported by CIMExportRequestDispatcher. This complete
367 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
368 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
369 are modified to implement above messages.
370
371 XmlIndicationDispatcher test program is modified to test complete
372 operation. It now creates a consumer, handler and indication
373 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
374 indication to consumer. This program needs
375 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
376 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
377 in the repository to complete the test successfully. This test
378 program also needs Handler qualifier defined in repository and
379 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
380 below:
381
382 //====================================================================
383 // CIM_IndicationHandlerXMLHTTP
384 //====================================================================
385 [Description (
386 "CIM_IndicationHandlerXMLHTTP describes the destination for "
387 "Indications to be delivered via HTTP, using a cimXML "
388 "representation."), Handler ("CIMxmlIndicationHandler") ]
389
390 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
391 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
392 a provider library.
393
394 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
395 interface for the provider. InvokeMethod currently uses CIMValue as
396 type for inParameters and outParameters, which are unable to give
397 information about param name, type and value. This should be changed
398 to CIMParamValue which will help providers to know details of the
399 parameter name and type along with value passed through InvoleMethod
400 call. Current implementation uses CIMParamValue as parameters while
401 travelling through message queues and converts it back to array of
402 CIMValue before calling Provider API (which needs to be changed
403 later).
404
405 Also added are two test programs:
406
407 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
408 CIMParamValue class.
409
410 src/Pegasus/Client/tests/InvokeMethod - which makes call to
411 InvokeMethod and displays the return value. Current
412 implementation assumes that provider had returned true value
413 and outParameters (which are now hard coded in
414 CIMOperationRequestDispatcher to implement functionality)
415 mike 1.51 which are passed as response of InvokeMethod to client.
416
417 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
418 authentication to the pegasus code. Created an Authentication Manager
419 and authenticator interfaces. The file based local authentication
420 module has been modified to implement the local authenticator
421 interface, to generate the challenge for the unauthorized requests
422 and to verify the authentication.
423
424 A skeleton program has been created for the Basic Authenticator.
425 This code is in the Security/Authentication directory which is not
426 yet linked into the build.
427
428 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
429 Decoders. Earlier decoders were sending requests and responses
430 before finishing complete Xml parse. This was prone to send
431 request/response even the Xml is wrong after the MethodCall.
432 New changes collects the Message* as return value from the
433 appropriate functions while parsing the Xml and sends on
434 _outputQueue only when Xml is parsed successfully.
435
436 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
437 fix the problem with constructing provider name and loading the
438 providers for unix platforms. Also moved the shared library name
439 construction (appending .sl or .so) from
440 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
441 ProviderModule.cpp and included it in a method that returns
442 provider file path name.
443
444 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
445 Handler. This handler extracts MappingStrings qualifier from class
446 definition and converts it into SNMP specific trap data. The trap
447 structure is defined in a abstract class in snmpDeliverTrap.h file.
448 Every one has his or her own SNMP agent, which will talk with master
449 agent to deliver the trap or may have some other mechanism.
450 Extending snmpDeliverTrap class and deliverTrap method will help to
451 implement specific trap delivery mechanism.
452
453 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
454 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
455 property value to be default in the plan file, remove the property from the
456 plan file. Converted ConfigSettingProvider to use provider2 library.
457 mike 1.51
458 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
459 to allow tracing of a specific number of bytes in a given
460 string. Also modified the XmlIO trace code to use the new interface.
461 Changed the config file defaults for tracing.
462
463 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
464 NonStop platform (NSK) in directory pegasus/mak. The following files
465 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
466 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
467 program-unix.mak. The original program.mak which previously covered
468 all platforms was split into platform-specific make files, and now
469 only contains conditionals. Files config.mak, objects.mak, and
470 library.mak were changed to include the NSK files.
471 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
472
473 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
474 commas (,) in the string values of key properties.
475
476 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
477
478 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
479 pegasus/mak/program-windows.mak that prevented program builds for
480 the windows platform (related to change from 28 Oct). Replaced
481 leading whitespace in front of commands with tabs as required
482 in make files.
483
484 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
485 because getting an error in 26
486
487 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
488 whose types are references. These reference values must be
489 treated specially in the XML encoding, using the VALUE.REFERENCE
490 tag structure.
491
492 Pegasus had been passing reference values simply as String values.
493 For example, EnumerateInstanceNames returned KEYVALUEs of string
494 type rather than VALUE.REFERENCEs.
495
496 I've modified the XmlReader::getKeyBindingElement() and
497 CIMReference::instanceNameToXml() methods to read and write the
498 XML in the proper format. However, making that change required
499 mike 1.51 that a CIMReference object be able to distinguish between a key
500 of String type and a key of reference type.
501
502 I've modified the String format of CIMReferences slightly to
503 allow efficient processing of references whose keys are also of
504 reference type. The "official" form uses the same encoding for
505 key values of String type and of reference type, and so it
506 would be necessary to retrieve the class definition and look up
507 the types of the key properties to determine how to treat the
508 key values. This is clearly too inefficient for internal
509 transformations between CIMReferences and String values.
510
511 The workaround is to encode a 'R' at the beginning of the value
512 for a key of reference type (before the opening '"'). This allows
513 the parser to know a priori whether the key is of String or
514 reference type.
515
516 In this example:
517
518 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
519
520 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
521 the usual encoding. Key2 is a reference property, so the extra 'R'
522 is inserted before its encoded value. Note that this algorithm is
523 recursive, such that RefClass could include KeyC of reference type,
524 which would also get encoded with the 'R' notation.
525
526 The toString() method inserts the 'R' to provide symmetry. A new
527 KeyBinding type (REFERENCE) has been defined to denote keys in a
528 CIMReference that are of reference type. This KeyBinding type must
529 be used appropriately for CIMReference::ttoString() to behave
530 correctly.
531
532 The files that have been modified to make this change are
533 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
534
535 A result of this change is that instances names in the instance
536 repository will include this extra 'R' character. Thus, you will
537 need to repopulate your repository when you download the latest
538 CIMOM version.
539
540 Note that for user-facing uses of the String encoding of instance
541 mike 1.51 names (such as might appear in MOF for static association
542 instances or in the CGI client), this solution is non-standard and
543 therefore unacceptable. It is likely that these points will need
544 to process the more expensive operation of retrieving the class
545 definition to determine the key property types.
546
547 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
548 in case of error in setting trace components. Modified the property owner
549 init and update methods. Submitted the pegasus/mak/Buildmakefile with
550 cleanbuild, rebuild and trace configuration options.
551
552 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
553 (instanceName).
554
555 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
556 GetProperty/SetProperty/EnumerateInstances request/response messages.
557 Added encoding and decoding of PropertyList parameters on all
558 relevant intrinsic methods.
559
560 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
561 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
562 mike 1.51
563 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
564 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
565 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
566 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
567 SystemNsk.cpp) contain stubs. The associated control files
568 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
569 nsk platform links.
570
571 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
572 toString() method for CIMValues of String type. The old behavior
573 returned an XML encoding of the String with special characters
574 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
575 would be returned as a"b. The new behavior just returns the
576 String value directly with no translation. (Note that
577 CIMValue.toXml() may still be used to get the XML-encoded value.)
578
579 This change was necessary in part to correct the behavior of the
580 repository. CreateInstance stores the instance name returned by
581 CIMInstance.getInstanceName(), which is built using calls to
582 CIMValue.toString(). GetInstance searches for the instance name
583 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
584 be successful, CreateInstance must have stored the instance name
585 in that same form, without special character encoding.
586
587 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
588 the CIMValue class. Eliminated improper use of CIMValue.toString(),
589 often replacing with CIMValue.get(String&) or CIMValue.toXml().
590 Also added some error handling in the indication handlers.
591
592 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
593 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
594 to handle local instance path and local classpath. Modified the
595 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
596 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
597
598 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
599 to hold the argument to ModifyInstance and the return values
600 from EnumerateInstances. The client and provider APIs need to
601 be updated to use this class.
602
603 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
604 mike 1.51 source files. This CLI allows addition, modification, removal and listing
605 of CIM users. The CLI is not linked to the main makefile as the Provider
606 functionality is yet to be implemented. Added the function
607 String getPassword(char* prompt) to the System.h and cpp files.
608
609 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
610 the server to challenge the unauthorized requests, authenticate
611 the challenge responses, and verify the subsequent authorized requests.
612 Implemented authentication mechanism on the Client api to send
613 responses to the challenges from the server. Current implementation
614 supports only 'local' authentication mechanism.
615
616 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
617
618 - Changed the return value of EnumerateInstances from Array<CIMInstance>
619 to Array<CIMNamedInstance>
620 - Changed the parameter to ModifyInstance from CIMInstance to
621 CIMNamedInstance
622 - Added an optional PropertyList parameter to ModifyInstance
623 - Changed all handling of PropertyList parameters to use the
624 CIMPropertyList class instead of Array<String>
625 mike 1.51
626 Each of these changes was required to comply with the DMTF specification.
627
628 These changes were made throughout the system except for in the provider
629 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
630 differences from providers, so older providers will continue to function.
631 However, this means that clients can not yet take advantage of the added
632 functionality.
633
634 When the provider API is updated, the following changes will be visible:
635
636 - Providers will get a PropertyList parameter to ModifyInstance which
637 they are required to respect. Providers that can not process the
638 PropertyList must throw a NOT_SUPPORTED exception whenever the
639 list is not null. Clients can take advantage of this change by
640 issuing a ModifyInstance request against a selected set of
641 properties in an instance, rather than being required to replace
642 the entire instance.
643
644 - Providers will be required to return instance names along with
645 instances in the EnumerateInstances method. Clients will receive
646 mike 1.51 these instance names, as the standard dictates.
647
648 - Providers will receive a CIMPropertyList argument containing the
649 PropertyList instead of an Array<String>. This change allows
650 providers to distinguish between an empty list and a null list.
651
652 Note that the repository also does not yet handle the PropertyList in
653 ModifyInstance correctly.
654
655 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
656 provider API to match the changes made to the EnumerateInstances and
657 ModifyInstance operations. These changes were made to comply with
658 the DMTF specification.
659
660 The original Provider API has not been updated, and I have no
661 plans to do so. Providers written to the original API will
662 continue to function, but they will not have the opportunity
663 to take advantage of the features that have been added.
664
665 The significant changes to the Provider2 API are:
666
667 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
668 they are required to respect. Providers that can not process the
669 PropertyList must throw a NOT_SUPPORTED exception whenever the
670 list is not null. Clients can take advantage of this change by
671 issuing a ModifyInstance request against a selected set of
672 properties in an instance, rather than being required to replace
673 the entire instance.
674
675 - Providers will get an IncludeQualifiers parameter to ModifyInstance
676 which they are required to respect. If IncludeQualifiers is
677 false, the qualifiers on the modified instance provided must not
678 be used to update the instance.
679
680 - Providers will be required to return instance names along with
681 instances in the EnumerateInstances method. Clients will receive
682 these instance names, as the standard dictates.
683
684 The providers that are in the Pegasus build have all been updated.
685 However, whenever the PropertyList is not null, the providers throw
686 a NOT_SUPPORTED exception.
687
688 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
689 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
690 the Common module. File Config.h was modified to include the NSK
691 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
692 without the standard (std) namespace.
693
694 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
695 properties to support alternate behavior of the Pegasus repository:
696 repositoryIsDefaultInstanceProvider and repositoryProviderName.
697
698 Using the first one, the repository can be enabled/disabled as the
699 default provider for instance (and association) operations. The default
700 setting is "true", so the default behavior has not been changed. To
701 disable the repository as the default instance provider, issue the
702 following command before starting cimserver:
703
704 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
705
706 The repositoryProviderName configuration property specifies what
707 provider name is used to explicitly register the repository as a
708 provider. This is necessary when the repository needs to serve
709 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
710 to "false". The default value is "repository". To register the
711 repository as an instance provider for a class, add a
712 'Provider("repository")' qualifier to the class definition.
713
714 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
715 pass to providers that act as services. This handle provides
716 service providers with access to the CIMServer data structures.
717
718 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
719 the repository so that it respects the IncludeQualifiers and
720 PropertyList parameters. Updated SetProperty in the repository
721 so that it uses ModifyInstance correctly. The repository now
722 supports GetProperty and SetProperty in addition to ModifyInstance.
723
724 Implemented GetProperty and SetProperty in the Dispatcher and
725 Provider2 so that they get translated to GetInstance and
726 ModifyInstance calls (respectively) in the provider. Providers
727 written to the Provider2 API that correctly process the new
728 ModifyInstance parameters will automatically support SetProperty
729 operations. Note that GetProperty and SetProperty currently only
730 mike 1.51 work for String properties because of an XML encoding limitation.
731
732 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
733 Security components for authentication and authorization.
734
735 Authentication and User Management:
736 cimuser CLI : This CLI is used for addition, modification, removal
737 and listing of CIM Users. The CIM user password is encrypted and stored
738 in a file. The password file format is compatible with Apache's htpasswd
739 generated password file.
740
741 cimauth CLI implement the authorization managment functionality by letting
742 to add/remove/list user authorizations.
743
744 User Manager and User Manager Provider components implement the user
745 management and authorization functionality.
746
747 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
748 under src/Pegasus/WQL which contains library and BNF.
749
750 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
751 mike 1.51 which does provider registration, block, unblock, and stop a provider.
752 It also alert Subscription Service of any provider registration changes.
753
754 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
755 and String.cpp with PEG_min. The _min macro caused problems on the
756 NSK platform because of a duplicate definition in a standard file.
757
758 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
759 subscription service provider that serves as the instance provider for the
760 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
761 classes (from CIM_Events27.mof). The service also takes appropriate action
762 in response to startup, shutdown of the cimom, termination of a provider,
763 or change in provider registration.
764
765 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
766 and the command line interface for shutting down cimom gracefully.
767 For more information, refer to the CIMOM Shutdown working paper
768 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
769
770 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
771 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
772 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
773 constructor to set a pointer to the server-, resp. client wide SSL_Context
774 structure. The Socket field in HTTPConnection is substituted with an
775 MP_Socket pointer, a class that is designed to hide the differences
776 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
777 is defined even in a non-ssl environment.
778 How to use it in a Server or Client:
779 1. Just create an SSL_Context once per Server/Client address space
780 2. Construct every HTTPConnector/Acceptor with a pointer to this
781 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
782 without SSL_Context for conventional connections.
|
783 mike 1.50
|
784 mike 1.51 The Configuration data was extended with the boolean SSL property, and
785 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
786
787 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
788 kumpf 1.61
|
789 mike 1.51 ---------------------------------------------------------------------------
790 Version 1.1 - July 2001 Development branch
791 Tagged as version_1_01 on 3 August 2001 (sorry should have been
792 1.1
793
794 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
795 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
796 and ExportClient classes. the indication.
797
798 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
799 make the delivery of indications over Xml-HTTP and email respectively.
800
801 Provided examples for HandlerTable, XmlIndicationDelivery and
802 SendMailIndicationDelivery to support this implementation.
803
804 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
805 library and a thread-safe message queue (first stage). Classes defined
806 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
807 and SimpleThread.
808
809 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
810 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
811 information on using wbemexec. A simple test script is included. Please
812 see pegasus/src/Clients/wbemexec/tests/readme for information on running
813 the test script.
814
815 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
816 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
817 and
818 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
819 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
820 src/Pegasus/Common/TraceFileHandler.cpp.
821
822 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
823 Config CLI. Please refer to the documentation
824 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
825 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
826 using the config framework and cimconfig CLI. Make sure to load the config
827 mof (src/gmake config) before starting the cimserver. A simple test script
828 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
829 information on running the test script.
830
831 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
832 (changed the H and CPP files for the major CIM objects. These
833 functions generate CIM MOF output for the objects.
834
835 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
836 Authentication provides security mechanism to authenticates CIM clients
837 that
838 connect to CIM Server on the same system without having to specify a
839 password.
840 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
841 This component only works on unix and it's not linked in with the main
842 build.
843 When authentication framework is defined this component may need to be
844 modified to integrate with the framework.
|
845 karl 1.49
846 ---------------------------------------------------------------------------
847 Version 0.99.x (Fixes to version 0.99) in Process
|
848 mike 1.51
|
849 karl 1.49 NOTE: Please do not input anything to this branch except for critical
850 fixes. This is, in effect, 1.0 and we do not want to use it for
851 development.
852
853 ----------------------------------------------------------------------------
854
855 Version 0.98.0 - Work in progress (This number skipped)
|
856 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
857 mike 1.36
|
858 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
859 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
860
|
861 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
862 in the HTML URL reference for passing instance names.
863
|
864 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
865
866 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
867
|
868 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
869 allow slp to compile.
870
|
871 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
872
873 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
874 ids to queue pointers).
875
|
876 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
877 and Dispatcher.
878
|
879 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
880 and
881 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
882 chip 1.44 ResponseHandler for Provider2 interface.
|
883 mike 1.45
884 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
885
886 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
887
|
888 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
889
|
890 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
891
892 12. (Mike Brasher) - Fixed compiler error on Linux.
893
|
894 karl 1.38 ------------------------------------------------------------------------------
895 --
|
896 mike 1.26
|
897 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
898 karl 1.16
899 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
900 for NT and Linux platforms.
|
901 mike 1.26
|
902 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
903 5988.
904 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
905 the DMTF.
|
906 mike 1.26
|
907 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
908 Fusion event. THis included a) extended the test for end of HTTP header from
909 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
910 Extended the HTTP message ID to allow for non-numeric message IDs.
|
911 mike 1.26
|
912 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
913 and created RepositoryDeclContext.{cpp,h}. This is the first step in
914 revamping the compiler to work independently of the repository (grb).
|
915 mike 1.26
|
916 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
917 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
918 Now when you build normally, you will get the committed grammar and parser
919 files instead of generating your own for a particular platform. This should
920 prevent back-level lex and yacc implementations from generating troublesome
921 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
922 bob 1.20 (grb)
|
923 mike 1.26
|
924 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
925 This change paves the way for upcoming changes that will allow the compiler
926 to work indepently of the repository. (grb)
|
927 mike 1.26
|
928 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
929 mike 1.26
|
930 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
931 modifyClass,
|
932 chip 1.22 createClass to protect caller's object.
|
933 mike 1.26
|
934 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
935 directory. These
936 interfaces allow very smart providers to perform advances operations.
937 CIMProviderStub has
|
938 chip 1.23 been updated to support the new interfaces. Needs testing.
|
939 mike 1.26
|
940 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
941 mike 1.26
|
942 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
943 repository you make world, make rebuild or make repository. ks
|
944 mike 1.26
945 12. Added associators() and associatorNames() operations to CIM repository.
|
946 mike 1.27 (MEB)
947
948 13. More on association implementation (all four operations supported).
949 Need to handle deletion of associations and protocol stubs still.
950 Need to test class associations (rather than just instance associations).
951 Need to handle deleteInstance().
952 (MEB)
|
953 mike 1.26
|
954 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
955
|
956 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
957 AssociationName
|
958 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
959 pages.
960
|
961 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
962 sage 1.31
963 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
964 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
965 Made cimserver accept the -D flag to eliminate the need for environment
966 variables.
|
967 mike 1.32
968 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
969 References() and ReferenceNames() CIM operations. These only operate
970 on instances at this time. They will operate on classes soon.
|
971 kumpf 1.34
972 19. (Mike Glantz) Extended and modified dynamic support
973 changes to (1) work on HP-UX and (2) have all images and libraries
974 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
975 change is to program.mak and library-unix.mak, removing specific
976 lists of dynamic library specs and putting them in the Makefile
977 and libraries.mak files that build the actual targets (lots of
978 these now have DYNAMIC_LIBRARIES defined).
|
979 karl 1.35
980 20. (Karl) added basic Queue function to common (based on array) and added
981 tests for stack and queue.
|
982 karl 1.38
983 ------------------------------------------------------------------------------
984 --
|
985 mike 1.36
|
986 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
987 karl 1.11
|
988 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
989 CIMServer (both)
|
990 karl 1.11 Functions added include:
991 a. Enable trace to log file.
|
992 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
993 is
|
994 karl 1.11 trace to log, -t is trace to console).
995 c. add parameter in optionsrow for help message and enable the capture
|
996 karl 1.12 of these messages in Options class. Also added help print that
997 prints these things out. However, format not to beautiful.
|
998 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
999 e. Extend the Clients\testclient so he does tests on Namespace.
|
1000 karl 1.15 2. (KS)Extended Log to show time, severity.
|
1001 mike 1.33
|
1002 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
1003 mike 1.33
|
1004 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
1005 logs
|
1006 karl 1.12 are put
|
1007 mike 1.33
|
1008 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1009 This is a preliminary version.
|
1010 mike 1.33
|
1011 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1012 karl 1.13 throws CannotBind exception.
|
1013 mike 1.33
|
1014 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1015 not
|
1016 karl 1.14 print out all of the message. At the least it prints out the error message
1017 and components of the message causing the problem.
|
1018 mike 1.33
|
1019 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1020 mike 1.33
|
1021 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1022 karl 1.14 existed.
|
1023 mike 1.33
1024 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1025 karl 1.15
|
1026 karl 1.29 ------------------------------------------------------------------------------
1027 --
|
1028 karl 1.6 Version 0.97.2
1029
1030 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1031 2. Extend Formatter for Boolean and Uint32 types.
1032 3. Change CIM Server to use Trace (-t) flag. This also changed
1033 Handler.h to work off of flag.
1034 4. Minor corrections to __Namespace Provider.
1035 5. Extend tests for Formatter, String, and other modules.
1036 6. Correct errors in documentation.
1037 7. New working papers (provider interface).
|
1038 karl 1.8 8. Add Providerreg.exe tool.
1039 9. Add trace output for messages sent from the Server.
|
1040 mike 1.26
|
1041 karl 1.29 ------------------------------------------------------------------------------
1042 --
|
1043 mike 1.26
|
1044 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1045 karl 1.5
|
1046 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1047 find functions. Note: This symbol is defined in config.h. (ks).
1048
|
1049 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1050 of dynamic lib loaading.
|
1051 karl 1.1
1052
|
1053 karl 1.29 ------------------------------------------------------------------------------
1054 --
|
1055 mike 1.26
|
1056 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1057 karl 1.1
1058 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1059 qualifiers, methods.
1060 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1061 methods.
1062 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1063 qualifiers and to
1064 remove qualifiers.
1065 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1066 compiler. It probably imposed more limitations than would be required with
|
1067 karl 1.2 the current compiler. This version of the port produces an excessively large
1068 common module due to template bloat. That problem will be fixed in a future
1069 change to the port. Also there are a log of duplicate symbol warnings generate
1070 by the AIC compiler but these cause no problems. The port has been tested
1071 with the complete unit test and client/server test successfully.
|
1072 karl 1.1
1073 --------------------------------------------------------------------------
|
1074 karl 1.2
|
1075 mike 1.4 23 May 2001
|
1076 karl 1.1
|
1077 mike 1.9 1. Ported to HPUX
|
1078 karl 1.5
|
1079 mike 1.9 --------------------------------------------------------------------------
1080
1081 29 May 2001
1082
1083 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1084 mike 1.51
1085
1086
1087
|
1088 karl 1.48
|
1089 karl 1.38
|
1090 karl 1.30
|
1091 karl 1.29
|
1092 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc