1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 kumpf 1.68
|
173 kumpf 1.75 19. (Roger Kumpf - HP) 1 Mar 2002 - Reworked the XmlWriter class to
174 eliminate many of the redundant memory copies that resulted from the
175 nested method call structure. Now, instead of having a method at
176 each level that adds a begin tag, contents, and an end tag, there
177 are separate methods to add the begin and end tags. At the top
178 level, each of the begin tag methods are called, then the message
179 "body" is added, followed by calls to the end tag methods.
180
181 The message body is currently still copied twice, once into the XML
182 payload and then again when the HTTP header is added. (Since the
183 HTTP header contains a content length field, the header cannot be
184 constructed until the payload is complete.) It is possible to
185 remove these extra copies as well, but that would require additional
186 changes elsewhere in the code. For example, the HTTPMessage class
187 would need to hold the headers and payload separately rather than in
188 a single buffer.
189
190 Along with these changes, I did a lot of cleanup. Much of the XML
191 formatting code has been moved from CIMReference to XmlWriter. Also,
192 error message formatting has been consolidated in XmlWriter from the
193 various encoders and decoders, etc.
194 kumpf 1.75
195 20. (Roger Kumpf - HP) 5 Mar 2002 - Added checks in the
196 CIMOperationRequestDecoder and CIMExportRequestDecoder to validate
197 that the information in the HTTP headers of a request is consistent
198 with what is encoded in the XML request itself.
199
200 Specifically, the CIMOperation, CIMProtocolVersion, CIMMethod,
201 CIMObject, CIMBatch, CIMExport, and CIMExportBatch headers are
202 validated.
203
|
204 karl 1.59 -------------------------------------------------------------------
|
205 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
206
207 1. Merged back to Main branch. All general development will be in main branch
208 in the future with releases in side branches. Special side developments
209 may temporarily be in side branches.
210 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
211 karl 1.53
212 2. (Karl) 18 December 2001 - Added new directory repositories where repository
213 implementations will be kept to separate them from the
214 repository interface defintion. Initial implementation is genericfile
215 which is the current file based repository.
216
217 Added new build variable RMREPOSITORY which is a generic MAKE command
218 to remove an existing repository. It simply substitutes for the RMDIRHIER
219 command at this point but we will make this a generic part of system
220 in the future.
|
221 karl 1.52
|
222 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
223 to check that all required parameters for intrinsic methods are
224 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
225 exception is thrown. Also added checks for duplicate parameters in the
226 intrinsic methods. If a parameter is specified more than once, a
227 CIM_ERR_INVALID_PARAMETER exception is thrown.
228
|
229 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
230 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
231 queue to this new queue. Modified CIMServer.cpp to create
232 CIMOperationRequestAuthorizer queue only when authorization is enabled.
233 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
234 it available to the CIMOperationRequestDispatcher.
235
|
236 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
237 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
238 forever. The problem was noticed when the TestClient program and CIMserver
239 service were both running. The service wasn't accessible to the TestClient
240 program.
241
|
242 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
243 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
244 in new queue, IndicationService which will get invoked from dispatcher.
245 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
246 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
247 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
248 CIM_GET_INSTANCE_REQUEST_MESSAGE
249 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
250 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
251
252 This new service will also take care of processing the indications on receiving
253 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
254 IndicationProvider or some other mechanism which is not yet clear.
255
256 IndicationService will also receive following messages from PG_ProviderRegistration
257 when a new IndicationProvider will get registered.
258 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
259 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
260
261 I had also defined new Indication Provider APIs, enableIndication, disableIndication
262 and modifyIndication with more parameters passed and eventually planning to terminate
263 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
264 plan to implement one more call as startIndication and will be done soon.
265
266 There are three new test programs in IndicationService directory, which will create
267 Filter, Indication and Subscription instances using IndicationService.
268
269 Also modified sample IndicationProvider code with the new APIs introduced.
|
270 mary 1.56
|
271 karl 1.52 -------------------------------------------------------------------------
|
272 karl 1.1
|
273 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
274 current working dev branch of build
|
275 mike 1.36
|
276 karl 1.49 ---------------------------------------------------------------------------
277 Version 1.1 - July 2001 Development branch (Work in PRogress)
278
|
279 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
280 PARAMETER.REFERENCE constructs for references).
281
282 2. (Mike Brasher) Reworked server communication into new module scheme.
|
283 mike 1.51 =======
284 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
285 seen as part of CGIclient class displays.
286
287 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
288 to the final version in Schemas\CIM25. This included minor
289 corrections, etc and a couple of file changes. This is the
290 official final CIM 25 schema relesed by the DMTF. This change
291 should not affect any current work.
292 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
293 directorys. Note however that today the make repository still
294 loads the 2.5 schema.
295
296 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
297 on XML output.
298
299 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
300 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
301 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
302 declarations in for loop initializers outside the loop, so multiple
303 "for (int i=0; i<10; i++);" statements cause a compile error.
304 mike 1.51
305 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
306 dependency on the config files at the start of the cimserver. Now the
307 cimserver will use in-memory default values in the absence of config files
308 and command line options. Fixed a few defects in the config framework that
309 were causing cimom to crash under certain conditions. Changed the config
310 provider class name to 'PG_ConfigSetting' in the mof file and modified
311 provider implementation files accordingly. Also modified the config CLI
312 to show user friendly error/status messages.
313
314 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
315 (reported incorrect line number on error in XML request if input redirected).
316 Enhanced the -d debug command line option to allow more flexibility in
317 generating debug output.
318
319 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
320 xml when it generates xml output.
321
322 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
323 a common file to reduce the number of files required by the default
324 repository implementation.
325 mike 1.51
326 10. (Mike Brasher) - Fixed minor bug in repository implementation.
327
328 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
329
330 12. (Mike Brasher) - Committed rework of server into queue approach.
331
332 13. (Mike Brasher) - New webserver and webclient examples.
333
334 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
335
336 15. (Mike Brasher) - Initial work on refactorying client into modules.
337 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
338
339 16. (Mike Brasher) - queue-based clients now complete.
340
341 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
342
343 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
344
345 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
346 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
347 a web server. See doc/Servlet for more information.
348
349 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
350 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
351 input and output can be written in a trace file.
352
353 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
354 Created new class SignalHandler that allow registration, activation and
355 deactivation of signal handler functions (Linux only !).
356
357 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
358 ExportClient to support ExportIndication. DisplayConsumer, a sample
359 consumer is added which will consume (by displaying on screen) the
360 indication exported by CIMExportRequestDispatcher. This complete
361 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
362 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
363 are modified to implement above messages.
364
365 XmlIndicationDispatcher test program is modified to test complete
366 operation. It now creates a consumer, handler and indication
367 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
368 indication to consumer. This program needs
369 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
370 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
371 in the repository to complete the test successfully. This test
372 program also needs Handler qualifier defined in repository and
373 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
374 below:
375
376 //====================================================================
377 // CIM_IndicationHandlerXMLHTTP
378 //====================================================================
379 [Description (
380 "CIM_IndicationHandlerXMLHTTP describes the destination for "
381 "Indications to be delivered via HTTP, using a cimXML "
382 "representation."), Handler ("CIMxmlIndicationHandler") ]
383
384 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
385 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
386 a provider library.
387
388 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
389 interface for the provider. InvokeMethod currently uses CIMValue as
390 type for inParameters and outParameters, which are unable to give
391 information about param name, type and value. This should be changed
392 to CIMParamValue which will help providers to know details of the
393 parameter name and type along with value passed through InvoleMethod
394 call. Current implementation uses CIMParamValue as parameters while
395 travelling through message queues and converts it back to array of
396 CIMValue before calling Provider API (which needs to be changed
397 later).
398
399 Also added are two test programs:
400
401 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
402 CIMParamValue class.
403
404 src/Pegasus/Client/tests/InvokeMethod - which makes call to
405 InvokeMethod and displays the return value. Current
406 implementation assumes that provider had returned true value
407 and outParameters (which are now hard coded in
408 CIMOperationRequestDispatcher to implement functionality)
409 mike 1.51 which are passed as response of InvokeMethod to client.
410
411 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
412 authentication to the pegasus code. Created an Authentication Manager
413 and authenticator interfaces. The file based local authentication
414 module has been modified to implement the local authenticator
415 interface, to generate the challenge for the unauthorized requests
416 and to verify the authentication.
417
418 A skeleton program has been created for the Basic Authenticator.
419 This code is in the Security/Authentication directory which is not
420 yet linked into the build.
421
422 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
423 Decoders. Earlier decoders were sending requests and responses
424 before finishing complete Xml parse. This was prone to send
425 request/response even the Xml is wrong after the MethodCall.
426 New changes collects the Message* as return value from the
427 appropriate functions while parsing the Xml and sends on
428 _outputQueue only when Xml is parsed successfully.
429
430 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
431 fix the problem with constructing provider name and loading the
432 providers for unix platforms. Also moved the shared library name
433 construction (appending .sl or .so) from
434 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
435 ProviderModule.cpp and included it in a method that returns
436 provider file path name.
437
438 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
439 Handler. This handler extracts MappingStrings qualifier from class
440 definition and converts it into SNMP specific trap data. The trap
441 structure is defined in a abstract class in snmpDeliverTrap.h file.
442 Every one has his or her own SNMP agent, which will talk with master
443 agent to deliver the trap or may have some other mechanism.
444 Extending snmpDeliverTrap class and deliverTrap method will help to
445 implement specific trap delivery mechanism.
446
447 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
448 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
449 property value to be default in the plan file, remove the property from the
450 plan file. Converted ConfigSettingProvider to use provider2 library.
451 mike 1.51
452 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
453 to allow tracing of a specific number of bytes in a given
454 string. Also modified the XmlIO trace code to use the new interface.
455 Changed the config file defaults for tracing.
456
457 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
458 NonStop platform (NSK) in directory pegasus/mak. The following files
459 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
460 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
461 program-unix.mak. The original program.mak which previously covered
462 all platforms was split into platform-specific make files, and now
463 only contains conditionals. Files config.mak, objects.mak, and
464 library.mak were changed to include the NSK files.
465 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
466
467 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
468 commas (,) in the string values of key properties.
469
470 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
471
472 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
473 pegasus/mak/program-windows.mak that prevented program builds for
474 the windows platform (related to change from 28 Oct). Replaced
475 leading whitespace in front of commands with tabs as required
476 in make files.
477
478 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
479 because getting an error in 26
480
481 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
482 whose types are references. These reference values must be
483 treated specially in the XML encoding, using the VALUE.REFERENCE
484 tag structure.
485
486 Pegasus had been passing reference values simply as String values.
487 For example, EnumerateInstanceNames returned KEYVALUEs of string
488 type rather than VALUE.REFERENCEs.
489
490 I've modified the XmlReader::getKeyBindingElement() and
491 CIMReference::instanceNameToXml() methods to read and write the
492 XML in the proper format. However, making that change required
493 mike 1.51 that a CIMReference object be able to distinguish between a key
494 of String type and a key of reference type.
495
496 I've modified the String format of CIMReferences slightly to
497 allow efficient processing of references whose keys are also of
498 reference type. The "official" form uses the same encoding for
499 key values of String type and of reference type, and so it
500 would be necessary to retrieve the class definition and look up
501 the types of the key properties to determine how to treat the
502 key values. This is clearly too inefficient for internal
503 transformations between CIMReferences and String values.
504
505 The workaround is to encode a 'R' at the beginning of the value
506 for a key of reference type (before the opening '"'). This allows
507 the parser to know a priori whether the key is of String or
508 reference type.
509
510 In this example:
511
512 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
513
514 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
515 the usual encoding. Key2 is a reference property, so the extra 'R'
516 is inserted before its encoded value. Note that this algorithm is
517 recursive, such that RefClass could include KeyC of reference type,
518 which would also get encoded with the 'R' notation.
519
520 The toString() method inserts the 'R' to provide symmetry. A new
521 KeyBinding type (REFERENCE) has been defined to denote keys in a
522 CIMReference that are of reference type. This KeyBinding type must
523 be used appropriately for CIMReference::ttoString() to behave
524 correctly.
525
526 The files that have been modified to make this change are
527 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
528
529 A result of this change is that instances names in the instance
530 repository will include this extra 'R' character. Thus, you will
531 need to repopulate your repository when you download the latest
532 CIMOM version.
533
534 Note that for user-facing uses of the String encoding of instance
535 mike 1.51 names (such as might appear in MOF for static association
536 instances or in the CGI client), this solution is non-standard and
537 therefore unacceptable. It is likely that these points will need
538 to process the more expensive operation of retrieving the class
539 definition to determine the key property types.
540
541 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
542 in case of error in setting trace components. Modified the property owner
543 init and update methods. Submitted the pegasus/mak/Buildmakefile with
544 cleanbuild, rebuild and trace configuration options.
545
546 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
547 (instanceName).
548
549 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
550 GetProperty/SetProperty/EnumerateInstances request/response messages.
551 Added encoding and decoding of PropertyList parameters on all
552 relevant intrinsic methods.
553
554 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
555 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
556 mike 1.51
557 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
558 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
559 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
560 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
561 SystemNsk.cpp) contain stubs. The associated control files
562 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
563 nsk platform links.
564
565 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
566 toString() method for CIMValues of String type. The old behavior
567 returned an XML encoding of the String with special characters
568 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
569 would be returned as a"b. The new behavior just returns the
570 String value directly with no translation. (Note that
571 CIMValue.toXml() may still be used to get the XML-encoded value.)
572
573 This change was necessary in part to correct the behavior of the
574 repository. CreateInstance stores the instance name returned by
575 CIMInstance.getInstanceName(), which is built using calls to
576 CIMValue.toString(). GetInstance searches for the instance name
577 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
578 be successful, CreateInstance must have stored the instance name
579 in that same form, without special character encoding.
580
581 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
582 the CIMValue class. Eliminated improper use of CIMValue.toString(),
583 often replacing with CIMValue.get(String&) or CIMValue.toXml().
584 Also added some error handling in the indication handlers.
585
586 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
587 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
588 to handle local instance path and local classpath. Modified the
589 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
590 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
591
592 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
593 to hold the argument to ModifyInstance and the return values
594 from EnumerateInstances. The client and provider APIs need to
595 be updated to use this class.
596
597 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
598 mike 1.51 source files. This CLI allows addition, modification, removal and listing
599 of CIM users. The CLI is not linked to the main makefile as the Provider
600 functionality is yet to be implemented. Added the function
601 String getPassword(char* prompt) to the System.h and cpp files.
602
603 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
604 the server to challenge the unauthorized requests, authenticate
605 the challenge responses, and verify the subsequent authorized requests.
606 Implemented authentication mechanism on the Client api to send
607 responses to the challenges from the server. Current implementation
608 supports only 'local' authentication mechanism.
609
610 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
611
612 - Changed the return value of EnumerateInstances from Array<CIMInstance>
613 to Array<CIMNamedInstance>
614 - Changed the parameter to ModifyInstance from CIMInstance to
615 CIMNamedInstance
616 - Added an optional PropertyList parameter to ModifyInstance
617 - Changed all handling of PropertyList parameters to use the
618 CIMPropertyList class instead of Array<String>
619 mike 1.51
620 Each of these changes was required to comply with the DMTF specification.
621
622 These changes were made throughout the system except for in the provider
623 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
624 differences from providers, so older providers will continue to function.
625 However, this means that clients can not yet take advantage of the added
626 functionality.
627
628 When the provider API is updated, the following changes will be visible:
629
630 - Providers will get a PropertyList parameter to ModifyInstance which
631 they are required to respect. Providers that can not process the
632 PropertyList must throw a NOT_SUPPORTED exception whenever the
633 list is not null. Clients can take advantage of this change by
634 issuing a ModifyInstance request against a selected set of
635 properties in an instance, rather than being required to replace
636 the entire instance.
637
638 - Providers will be required to return instance names along with
639 instances in the EnumerateInstances method. Clients will receive
640 mike 1.51 these instance names, as the standard dictates.
641
642 - Providers will receive a CIMPropertyList argument containing the
643 PropertyList instead of an Array<String>. This change allows
644 providers to distinguish between an empty list and a null list.
645
646 Note that the repository also does not yet handle the PropertyList in
647 ModifyInstance correctly.
648
649 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
650 provider API to match the changes made to the EnumerateInstances and
651 ModifyInstance operations. These changes were made to comply with
652 the DMTF specification.
653
654 The original Provider API has not been updated, and I have no
655 plans to do so. Providers written to the original API will
656 continue to function, but they will not have the opportunity
657 to take advantage of the features that have been added.
658
659 The significant changes to the Provider2 API are:
660
661 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
662 they are required to respect. Providers that can not process the
663 PropertyList must throw a NOT_SUPPORTED exception whenever the
664 list is not null. Clients can take advantage of this change by
665 issuing a ModifyInstance request against a selected set of
666 properties in an instance, rather than being required to replace
667 the entire instance.
668
669 - Providers will get an IncludeQualifiers parameter to ModifyInstance
670 which they are required to respect. If IncludeQualifiers is
671 false, the qualifiers on the modified instance provided must not
672 be used to update the instance.
673
674 - Providers will be required to return instance names along with
675 instances in the EnumerateInstances method. Clients will receive
676 these instance names, as the standard dictates.
677
678 The providers that are in the Pegasus build have all been updated.
679 However, whenever the PropertyList is not null, the providers throw
680 a NOT_SUPPORTED exception.
681
682 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
683 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
684 the Common module. File Config.h was modified to include the NSK
685 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
686 without the standard (std) namespace.
687
688 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
689 properties to support alternate behavior of the Pegasus repository:
690 repositoryIsDefaultInstanceProvider and repositoryProviderName.
691
692 Using the first one, the repository can be enabled/disabled as the
693 default provider for instance (and association) operations. The default
694 setting is "true", so the default behavior has not been changed. To
695 disable the repository as the default instance provider, issue the
696 following command before starting cimserver:
697
698 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
699
700 The repositoryProviderName configuration property specifies what
701 provider name is used to explicitly register the repository as a
702 provider. This is necessary when the repository needs to serve
703 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
704 to "false". The default value is "repository". To register the
705 repository as an instance provider for a class, add a
706 'Provider("repository")' qualifier to the class definition.
707
708 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
709 pass to providers that act as services. This handle provides
710 service providers with access to the CIMServer data structures.
711
712 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
713 the repository so that it respects the IncludeQualifiers and
714 PropertyList parameters. Updated SetProperty in the repository
715 so that it uses ModifyInstance correctly. The repository now
716 supports GetProperty and SetProperty in addition to ModifyInstance.
717
718 Implemented GetProperty and SetProperty in the Dispatcher and
719 Provider2 so that they get translated to GetInstance and
720 ModifyInstance calls (respectively) in the provider. Providers
721 written to the Provider2 API that correctly process the new
722 ModifyInstance parameters will automatically support SetProperty
723 operations. Note that GetProperty and SetProperty currently only
724 mike 1.51 work for String properties because of an XML encoding limitation.
725
726 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
727 Security components for authentication and authorization.
728
729 Authentication and User Management:
730 cimuser CLI : This CLI is used for addition, modification, removal
731 and listing of CIM Users. The CIM user password is encrypted and stored
732 in a file. The password file format is compatible with Apache's htpasswd
733 generated password file.
734
735 cimauth CLI implement the authorization managment functionality by letting
736 to add/remove/list user authorizations.
737
738 User Manager and User Manager Provider components implement the user
739 management and authorization functionality.
740
741 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
742 under src/Pegasus/WQL which contains library and BNF.
743
744 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
745 mike 1.51 which does provider registration, block, unblock, and stop a provider.
746 It also alert Subscription Service of any provider registration changes.
747
748 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
749 and String.cpp with PEG_min. The _min macro caused problems on the
750 NSK platform because of a duplicate definition in a standard file.
751
752 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
753 subscription service provider that serves as the instance provider for the
754 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
755 classes (from CIM_Events27.mof). The service also takes appropriate action
756 in response to startup, shutdown of the cimom, termination of a provider,
757 or change in provider registration.
758
759 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
760 and the command line interface for shutting down cimom gracefully.
761 For more information, refer to the CIMOM Shutdown working paper
762 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
763
764 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
765 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
766 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
767 constructor to set a pointer to the server-, resp. client wide SSL_Context
768 structure. The Socket field in HTTPConnection is substituted with an
769 MP_Socket pointer, a class that is designed to hide the differences
770 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
771 is defined even in a non-ssl environment.
772 How to use it in a Server or Client:
773 1. Just create an SSL_Context once per Server/Client address space
774 2. Construct every HTTPConnector/Acceptor with a pointer to this
775 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
776 without SSL_Context for conventional connections.
|
777 mike 1.50
|
778 mike 1.51 The Configuration data was extended with the boolean SSL property, and
779 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
780
781 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
782 kumpf 1.61
|
783 mike 1.51 ---------------------------------------------------------------------------
784 Version 1.1 - July 2001 Development branch
785 Tagged as version_1_01 on 3 August 2001 (sorry should have been
786 1.1
787
788 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
789 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
790 and ExportClient classes. the indication.
791
792 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
793 make the delivery of indications over Xml-HTTP and email respectively.
794
795 Provided examples for HandlerTable, XmlIndicationDelivery and
796 SendMailIndicationDelivery to support this implementation.
797
798 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
799 library and a thread-safe message queue (first stage). Classes defined
800 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
801 and SimpleThread.
802
803 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
804 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
805 information on using wbemexec. A simple test script is included. Please
806 see pegasus/src/Clients/wbemexec/tests/readme for information on running
807 the test script.
808
809 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
810 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
811 and
812 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
813 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
814 src/Pegasus/Common/TraceFileHandler.cpp.
815
816 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
817 Config CLI. Please refer to the documentation
818 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
819 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
820 using the config framework and cimconfig CLI. Make sure to load the config
821 mof (src/gmake config) before starting the cimserver. A simple test script
822 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
823 information on running the test script.
824
825 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
826 (changed the H and CPP files for the major CIM objects. These
827 functions generate CIM MOF output for the objects.
828
829 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
830 Authentication provides security mechanism to authenticates CIM clients
831 that
832 connect to CIM Server on the same system without having to specify a
833 password.
834 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
835 This component only works on unix and it's not linked in with the main
836 build.
837 When authentication framework is defined this component may need to be
838 modified to integrate with the framework.
|
839 karl 1.49
840 ---------------------------------------------------------------------------
841 Version 0.99.x (Fixes to version 0.99) in Process
|
842 mike 1.51
|
843 karl 1.49 NOTE: Please do not input anything to this branch except for critical
844 fixes. This is, in effect, 1.0 and we do not want to use it for
845 development.
846
847 ----------------------------------------------------------------------------
848
849 Version 0.98.0 - Work in progress (This number skipped)
|
850 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
851 mike 1.36
|
852 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
853 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
854
|
855 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
856 in the HTML URL reference for passing instance names.
857
|
858 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
859
860 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
861
|
862 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
863 allow slp to compile.
864
|
865 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
866
867 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
868 ids to queue pointers).
869
|
870 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
871 and Dispatcher.
872
|
873 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
874 and
875 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
876 chip 1.44 ResponseHandler for Provider2 interface.
|
877 mike 1.45
878 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
879
880 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
881
|
882 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
883
|
884 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
885
886 12. (Mike Brasher) - Fixed compiler error on Linux.
887
|
888 karl 1.38 ------------------------------------------------------------------------------
889 --
|
890 mike 1.26
|
891 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
892 karl 1.16
893 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
894 for NT and Linux platforms.
|
895 mike 1.26
|
896 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
897 5988.
898 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
899 the DMTF.
|
900 mike 1.26
|
901 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
902 Fusion event. THis included a) extended the test for end of HTTP header from
903 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
904 Extended the HTTP message ID to allow for non-numeric message IDs.
|
905 mike 1.26
|
906 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
907 and created RepositoryDeclContext.{cpp,h}. This is the first step in
908 revamping the compiler to work independently of the repository (grb).
|
909 mike 1.26
|
910 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
911 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
912 Now when you build normally, you will get the committed grammar and parser
913 files instead of generating your own for a particular platform. This should
914 prevent back-level lex and yacc implementations from generating troublesome
915 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
916 bob 1.20 (grb)
|
917 mike 1.26
|
918 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
919 This change paves the way for upcoming changes that will allow the compiler
920 to work indepently of the repository. (grb)
|
921 mike 1.26
|
922 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
923 mike 1.26
|
924 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
925 modifyClass,
|
926 chip 1.22 createClass to protect caller's object.
|
927 mike 1.26
|
928 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
929 directory. These
930 interfaces allow very smart providers to perform advances operations.
931 CIMProviderStub has
|
932 chip 1.23 been updated to support the new interfaces. Needs testing.
|
933 mike 1.26
|
934 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
935 mike 1.26
|
936 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
937 repository you make world, make rebuild or make repository. ks
|
938 mike 1.26
939 12. Added associators() and associatorNames() operations to CIM repository.
|
940 mike 1.27 (MEB)
941
942 13. More on association implementation (all four operations supported).
943 Need to handle deletion of associations and protocol stubs still.
944 Need to test class associations (rather than just instance associations).
945 Need to handle deleteInstance().
946 (MEB)
|
947 mike 1.26
|
948 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
949
|
950 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
951 AssociationName
|
952 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
953 pages.
954
|
955 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
956 sage 1.31
957 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
958 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
959 Made cimserver accept the -D flag to eliminate the need for environment
960 variables.
|
961 mike 1.32
962 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
963 References() and ReferenceNames() CIM operations. These only operate
964 on instances at this time. They will operate on classes soon.
|
965 kumpf 1.34
966 19. (Mike Glantz) Extended and modified dynamic support
967 changes to (1) work on HP-UX and (2) have all images and libraries
968 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
969 change is to program.mak and library-unix.mak, removing specific
970 lists of dynamic library specs and putting them in the Makefile
971 and libraries.mak files that build the actual targets (lots of
972 these now have DYNAMIC_LIBRARIES defined).
|
973 karl 1.35
974 20. (Karl) added basic Queue function to common (based on array) and added
975 tests for stack and queue.
|
976 karl 1.38
977 ------------------------------------------------------------------------------
978 --
|
979 mike 1.36
|
980 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
981 karl 1.11
|
982 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
983 CIMServer (both)
|
984 karl 1.11 Functions added include:
985 a. Enable trace to log file.
|
986 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
987 is
|
988 karl 1.11 trace to log, -t is trace to console).
989 c. add parameter in optionsrow for help message and enable the capture
|
990 karl 1.12 of these messages in Options class. Also added help print that
991 prints these things out. However, format not to beautiful.
|
992 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
993 e. Extend the Clients\testclient so he does tests on Namespace.
|
994 karl 1.15 2. (KS)Extended Log to show time, severity.
|
995 mike 1.33
|
996 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
997 mike 1.33
|
998 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
999 logs
|
1000 karl 1.12 are put
|
1001 mike 1.33
|
1002 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
1003 This is a preliminary version.
|
1004 mike 1.33
|
1005 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
1006 karl 1.13 throws CannotBind exception.
|
1007 mike 1.33
|
1008 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
1009 not
|
1010 karl 1.14 print out all of the message. At the least it prints out the error message
1011 and components of the message causing the problem.
|
1012 mike 1.33
|
1013 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
1014 mike 1.33
|
1015 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
1016 karl 1.14 existed.
|
1017 mike 1.33
1018 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
1019 karl 1.15
|
1020 karl 1.29 ------------------------------------------------------------------------------
1021 --
|
1022 karl 1.6 Version 0.97.2
1023
1024 1. Extend HP UX port to correctly load Dynamic Load Libraries.
1025 2. Extend Formatter for Boolean and Uint32 types.
1026 3. Change CIM Server to use Trace (-t) flag. This also changed
1027 Handler.h to work off of flag.
1028 4. Minor corrections to __Namespace Provider.
1029 5. Extend tests for Formatter, String, and other modules.
1030 6. Correct errors in documentation.
1031 7. New working papers (provider interface).
|
1032 karl 1.8 8. Add Providerreg.exe tool.
1033 9. Add trace output for messages sent from the Server.
|
1034 mike 1.26
|
1035 karl 1.29 ------------------------------------------------------------------------------
1036 --
|
1037 mike 1.26
|
1038 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1039 karl 1.5
|
1040 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1041 find functions. Note: This symbol is defined in config.h. (ks).
1042
|
1043 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1044 of dynamic lib loaading.
|
1045 karl 1.1
1046
|
1047 karl 1.29 ------------------------------------------------------------------------------
1048 --
|
1049 mike 1.26
|
1050 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1051 karl 1.1
1052 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1053 qualifiers, methods.
1054 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1055 methods.
1056 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1057 qualifiers and to
1058 remove qualifiers.
1059 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1060 compiler. It probably imposed more limitations than would be required with
|
1061 karl 1.2 the current compiler. This version of the port produces an excessively large
1062 common module due to template bloat. That problem will be fixed in a future
1063 change to the port. Also there are a log of duplicate symbol warnings generate
1064 by the AIC compiler but these cause no problems. The port has been tested
1065 with the complete unit test and client/server test successfully.
|
1066 karl 1.1
1067 --------------------------------------------------------------------------
|
1068 karl 1.2
|
1069 mike 1.4 23 May 2001
|
1070 karl 1.1
|
1071 mike 1.9 1. Ported to HPUX
|
1072 karl 1.5
|
1073 mike 1.9 --------------------------------------------------------------------------
1074
1075 29 May 2001
1076
1077 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1078 mike 1.51
1079
1080
1081
|
1082 karl 1.48
|
1083 karl 1.38
|
1084 karl 1.30
|
1085 karl 1.29
|
1086 mike 1.10
|