1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 karl 1.74
170 18 (KS) 6 March 2002 - Implemented changes to compiler and flavors to correct the
171 definition of CIMFlavors.
|
172 kumpf 1.68
|
173 karl 1.59 -------------------------------------------------------------------
|
174 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
175
176 1. Merged back to Main branch. All general development will be in main branch
177 in the future with releases in side branches. Special side developments
178 may temporarily be in side branches.
179 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
180 karl 1.53
181 2. (Karl) 18 December 2001 - Added new directory repositories where repository
182 implementations will be kept to separate them from the
183 repository interface defintion. Initial implementation is genericfile
184 which is the current file based repository.
185
186 Added new build variable RMREPOSITORY which is a generic MAKE command
187 to remove an existing repository. It simply substitutes for the RMDIRHIER
188 command at this point but we will make this a generic part of system
189 in the future.
|
190 karl 1.52
|
191 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
192 to check that all required parameters for intrinsic methods are
193 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
194 exception is thrown. Also added checks for duplicate parameters in the
195 intrinsic methods. If a parameter is specified more than once, a
196 CIM_ERR_INVALID_PARAMETER exception is thrown.
197
|
198 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
199 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
200 queue to this new queue. Modified CIMServer.cpp to create
201 CIMOperationRequestAuthorizer queue only when authorization is enabled.
202 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
203 it available to the CIMOperationRequestDispatcher.
204
|
205 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
206 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
207 forever. The problem was noticed when the TestClient program and CIMserver
208 service were both running. The service wasn't accessible to the TestClient
209 program.
210
|
211 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
212 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
213 in new queue, IndicationService which will get invoked from dispatcher.
214 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
215 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
216 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
217 CIM_GET_INSTANCE_REQUEST_MESSAGE
218 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
219 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
220
221 This new service will also take care of processing the indications on receiving
222 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
223 IndicationProvider or some other mechanism which is not yet clear.
224
225 IndicationService will also receive following messages from PG_ProviderRegistration
226 when a new IndicationProvider will get registered.
227 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
228 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
229
230 I had also defined new Indication Provider APIs, enableIndication, disableIndication
231 and modifyIndication with more parameters passed and eventually planning to terminate
232 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
233 plan to implement one more call as startIndication and will be done soon.
234
235 There are three new test programs in IndicationService directory, which will create
236 Filter, Indication and Subscription instances using IndicationService.
237
238 Also modified sample IndicationProvider code with the new APIs introduced.
|
239 mary 1.56
|
240 karl 1.52 -------------------------------------------------------------------------
|
241 karl 1.1
|
242 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
243 current working dev branch of build
|
244 mike 1.36
|
245 karl 1.49 ---------------------------------------------------------------------------
246 Version 1.1 - July 2001 Development branch (Work in PRogress)
247
|
248 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
249 PARAMETER.REFERENCE constructs for references).
250
251 2. (Mike Brasher) Reworked server communication into new module scheme.
|
252 mike 1.51 =======
253 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
254 seen as part of CGIclient class displays.
255
256 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
257 to the final version in Schemas\CIM25. This included minor
258 corrections, etc and a couple of file changes. This is the
259 official final CIM 25 schema relesed by the DMTF. This change
260 should not affect any current work.
261 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
262 directorys. Note however that today the make repository still
263 loads the 2.5 schema.
264
265 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
266 on XML output.
267
268 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
269 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
270 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
271 declarations in for loop initializers outside the loop, so multiple
272 "for (int i=0; i<10; i++);" statements cause a compile error.
273 mike 1.51
274 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
275 dependency on the config files at the start of the cimserver. Now the
276 cimserver will use in-memory default values in the absence of config files
277 and command line options. Fixed a few defects in the config framework that
278 were causing cimom to crash under certain conditions. Changed the config
279 provider class name to 'PG_ConfigSetting' in the mof file and modified
280 provider implementation files accordingly. Also modified the config CLI
281 to show user friendly error/status messages.
282
283 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
284 (reported incorrect line number on error in XML request if input redirected).
285 Enhanced the -d debug command line option to allow more flexibility in
286 generating debug output.
287
288 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
289 xml when it generates xml output.
290
291 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
292 a common file to reduce the number of files required by the default
293 repository implementation.
294 mike 1.51
295 10. (Mike Brasher) - Fixed minor bug in repository implementation.
296
297 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
298
299 12. (Mike Brasher) - Committed rework of server into queue approach.
300
301 13. (Mike Brasher) - New webserver and webclient examples.
302
303 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
304
305 15. (Mike Brasher) - Initial work on refactorying client into modules.
306 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
307
308 16. (Mike Brasher) - queue-based clients now complete.
309
310 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
311
312 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
313
314 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
315 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
316 a web server. See doc/Servlet for more information.
317
318 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
319 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
320 input and output can be written in a trace file.
321
322 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
323 Created new class SignalHandler that allow registration, activation and
324 deactivation of signal handler functions (Linux only !).
325
326 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
327 ExportClient to support ExportIndication. DisplayConsumer, a sample
328 consumer is added which will consume (by displaying on screen) the
329 indication exported by CIMExportRequestDispatcher. This complete
330 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
331 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
332 are modified to implement above messages.
333
334 XmlIndicationDispatcher test program is modified to test complete
335 operation. It now creates a consumer, handler and indication
336 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
337 indication to consumer. This program needs
338 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
339 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
340 in the repository to complete the test successfully. This test
341 program also needs Handler qualifier defined in repository and
342 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
343 below:
344
345 //====================================================================
346 // CIM_IndicationHandlerXMLHTTP
347 //====================================================================
348 [Description (
349 "CIM_IndicationHandlerXMLHTTP describes the destination for "
350 "Indications to be delivered via HTTP, using a cimXML "
351 "representation."), Handler ("CIMxmlIndicationHandler") ]
352
353 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
354 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
355 a provider library.
356
357 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
358 interface for the provider. InvokeMethod currently uses CIMValue as
359 type for inParameters and outParameters, which are unable to give
360 information about param name, type and value. This should be changed
361 to CIMParamValue which will help providers to know details of the
362 parameter name and type along with value passed through InvoleMethod
363 call. Current implementation uses CIMParamValue as parameters while
364 travelling through message queues and converts it back to array of
365 CIMValue before calling Provider API (which needs to be changed
366 later).
367
368 Also added are two test programs:
369
370 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
371 CIMParamValue class.
372
373 src/Pegasus/Client/tests/InvokeMethod - which makes call to
374 InvokeMethod and displays the return value. Current
375 implementation assumes that provider had returned true value
376 and outParameters (which are now hard coded in
377 CIMOperationRequestDispatcher to implement functionality)
378 mike 1.51 which are passed as response of InvokeMethod to client.
379
380 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
381 authentication to the pegasus code. Created an Authentication Manager
382 and authenticator interfaces. The file based local authentication
383 module has been modified to implement the local authenticator
384 interface, to generate the challenge for the unauthorized requests
385 and to verify the authentication.
386
387 A skeleton program has been created for the Basic Authenticator.
388 This code is in the Security/Authentication directory which is not
389 yet linked into the build.
390
391 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
392 Decoders. Earlier decoders were sending requests and responses
393 before finishing complete Xml parse. This was prone to send
394 request/response even the Xml is wrong after the MethodCall.
395 New changes collects the Message* as return value from the
396 appropriate functions while parsing the Xml and sends on
397 _outputQueue only when Xml is parsed successfully.
398
399 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
400 fix the problem with constructing provider name and loading the
401 providers for unix platforms. Also moved the shared library name
402 construction (appending .sl or .so) from
403 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
404 ProviderModule.cpp and included it in a method that returns
405 provider file path name.
406
407 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
408 Handler. This handler extracts MappingStrings qualifier from class
409 definition and converts it into SNMP specific trap data. The trap
410 structure is defined in a abstract class in snmpDeliverTrap.h file.
411 Every one has his or her own SNMP agent, which will talk with master
412 agent to deliver the trap or may have some other mechanism.
413 Extending snmpDeliverTrap class and deliverTrap method will help to
414 implement specific trap delivery mechanism.
415
416 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
417 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
418 property value to be default in the plan file, remove the property from the
419 plan file. Converted ConfigSettingProvider to use provider2 library.
420 mike 1.51
421 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
422 to allow tracing of a specific number of bytes in a given
423 string. Also modified the XmlIO trace code to use the new interface.
424 Changed the config file defaults for tracing.
425
426 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
427 NonStop platform (NSK) in directory pegasus/mak. The following files
428 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
429 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
430 program-unix.mak. The original program.mak which previously covered
431 all platforms was split into platform-specific make files, and now
432 only contains conditionals. Files config.mak, objects.mak, and
433 library.mak were changed to include the NSK files.
434 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
435
436 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
437 commas (,) in the string values of key properties.
438
439 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
440
441 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
442 pegasus/mak/program-windows.mak that prevented program builds for
443 the windows platform (related to change from 28 Oct). Replaced
444 leading whitespace in front of commands with tabs as required
445 in make files.
446
447 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
448 because getting an error in 26
449
450 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
451 whose types are references. These reference values must be
452 treated specially in the XML encoding, using the VALUE.REFERENCE
453 tag structure.
454
455 Pegasus had been passing reference values simply as String values.
456 For example, EnumerateInstanceNames returned KEYVALUEs of string
457 type rather than VALUE.REFERENCEs.
458
459 I've modified the XmlReader::getKeyBindingElement() and
460 CIMReference::instanceNameToXml() methods to read and write the
461 XML in the proper format. However, making that change required
462 mike 1.51 that a CIMReference object be able to distinguish between a key
463 of String type and a key of reference type.
464
465 I've modified the String format of CIMReferences slightly to
466 allow efficient processing of references whose keys are also of
467 reference type. The "official" form uses the same encoding for
468 key values of String type and of reference type, and so it
469 would be necessary to retrieve the class definition and look up
470 the types of the key properties to determine how to treat the
471 key values. This is clearly too inefficient for internal
472 transformations between CIMReferences and String values.
473
474 The workaround is to encode a 'R' at the beginning of the value
475 for a key of reference type (before the opening '"'). This allows
476 the parser to know a priori whether the key is of String or
477 reference type.
478
479 In this example:
480
481 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
482
483 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
484 the usual encoding. Key2 is a reference property, so the extra 'R'
485 is inserted before its encoded value. Note that this algorithm is
486 recursive, such that RefClass could include KeyC of reference type,
487 which would also get encoded with the 'R' notation.
488
489 The toString() method inserts the 'R' to provide symmetry. A new
490 KeyBinding type (REFERENCE) has been defined to denote keys in a
491 CIMReference that are of reference type. This KeyBinding type must
492 be used appropriately for CIMReference::ttoString() to behave
493 correctly.
494
495 The files that have been modified to make this change are
496 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
497
498 A result of this change is that instances names in the instance
499 repository will include this extra 'R' character. Thus, you will
500 need to repopulate your repository when you download the latest
501 CIMOM version.
502
503 Note that for user-facing uses of the String encoding of instance
504 mike 1.51 names (such as might appear in MOF for static association
505 instances or in the CGI client), this solution is non-standard and
506 therefore unacceptable. It is likely that these points will need
507 to process the more expensive operation of retrieving the class
508 definition to determine the key property types.
509
510 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
511 in case of error in setting trace components. Modified the property owner
512 init and update methods. Submitted the pegasus/mak/Buildmakefile with
513 cleanbuild, rebuild and trace configuration options.
514
515 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
516 (instanceName).
517
518 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
519 GetProperty/SetProperty/EnumerateInstances request/response messages.
520 Added encoding and decoding of PropertyList parameters on all
521 relevant intrinsic methods.
522
523 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
524 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
525 mike 1.51
526 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
527 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
528 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
529 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
530 SystemNsk.cpp) contain stubs. The associated control files
531 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
532 nsk platform links.
533
534 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
535 toString() method for CIMValues of String type. The old behavior
536 returned an XML encoding of the String with special characters
537 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
538 would be returned as a"b. The new behavior just returns the
539 String value directly with no translation. (Note that
540 CIMValue.toXml() may still be used to get the XML-encoded value.)
541
542 This change was necessary in part to correct the behavior of the
543 repository. CreateInstance stores the instance name returned by
544 CIMInstance.getInstanceName(), which is built using calls to
545 CIMValue.toString(). GetInstance searches for the instance name
546 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
547 be successful, CreateInstance must have stored the instance name
548 in that same form, without special character encoding.
549
550 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
551 the CIMValue class. Eliminated improper use of CIMValue.toString(),
552 often replacing with CIMValue.get(String&) or CIMValue.toXml().
553 Also added some error handling in the indication handlers.
554
555 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
556 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
557 to handle local instance path and local classpath. Modified the
558 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
559 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
560
561 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
562 to hold the argument to ModifyInstance and the return values
563 from EnumerateInstances. The client and provider APIs need to
564 be updated to use this class.
565
566 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
567 mike 1.51 source files. This CLI allows addition, modification, removal and listing
568 of CIM users. The CLI is not linked to the main makefile as the Provider
569 functionality is yet to be implemented. Added the function
570 String getPassword(char* prompt) to the System.h and cpp files.
571
572 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
573 the server to challenge the unauthorized requests, authenticate
574 the challenge responses, and verify the subsequent authorized requests.
575 Implemented authentication mechanism on the Client api to send
576 responses to the challenges from the server. Current implementation
577 supports only 'local' authentication mechanism.
578
579 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
580
581 - Changed the return value of EnumerateInstances from Array<CIMInstance>
582 to Array<CIMNamedInstance>
583 - Changed the parameter to ModifyInstance from CIMInstance to
584 CIMNamedInstance
585 - Added an optional PropertyList parameter to ModifyInstance
586 - Changed all handling of PropertyList parameters to use the
587 CIMPropertyList class instead of Array<String>
588 mike 1.51
589 Each of these changes was required to comply with the DMTF specification.
590
591 These changes were made throughout the system except for in the provider
592 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
593 differences from providers, so older providers will continue to function.
594 However, this means that clients can not yet take advantage of the added
595 functionality.
596
597 When the provider API is updated, the following changes will be visible:
598
599 - Providers will get a PropertyList parameter to ModifyInstance which
600 they are required to respect. Providers that can not process the
601 PropertyList must throw a NOT_SUPPORTED exception whenever the
602 list is not null. Clients can take advantage of this change by
603 issuing a ModifyInstance request against a selected set of
604 properties in an instance, rather than being required to replace
605 the entire instance.
606
607 - Providers will be required to return instance names along with
608 instances in the EnumerateInstances method. Clients will receive
609 mike 1.51 these instance names, as the standard dictates.
610
611 - Providers will receive a CIMPropertyList argument containing the
612 PropertyList instead of an Array<String>. This change allows
613 providers to distinguish between an empty list and a null list.
614
615 Note that the repository also does not yet handle the PropertyList in
616 ModifyInstance correctly.
617
618 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
619 provider API to match the changes made to the EnumerateInstances and
620 ModifyInstance operations. These changes were made to comply with
621 the DMTF specification.
622
623 The original Provider API has not been updated, and I have no
624 plans to do so. Providers written to the original API will
625 continue to function, but they will not have the opportunity
626 to take advantage of the features that have been added.
627
628 The significant changes to the Provider2 API are:
629
630 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
631 they are required to respect. Providers that can not process the
632 PropertyList must throw a NOT_SUPPORTED exception whenever the
633 list is not null. Clients can take advantage of this change by
634 issuing a ModifyInstance request against a selected set of
635 properties in an instance, rather than being required to replace
636 the entire instance.
637
638 - Providers will get an IncludeQualifiers parameter to ModifyInstance
639 which they are required to respect. If IncludeQualifiers is
640 false, the qualifiers on the modified instance provided must not
641 be used to update the instance.
642
643 - Providers will be required to return instance names along with
644 instances in the EnumerateInstances method. Clients will receive
645 these instance names, as the standard dictates.
646
647 The providers that are in the Pegasus build have all been updated.
648 However, whenever the PropertyList is not null, the providers throw
649 a NOT_SUPPORTED exception.
650
651 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
652 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
653 the Common module. File Config.h was modified to include the NSK
654 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
655 without the standard (std) namespace.
656
657 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
658 properties to support alternate behavior of the Pegasus repository:
659 repositoryIsDefaultInstanceProvider and repositoryProviderName.
660
661 Using the first one, the repository can be enabled/disabled as the
662 default provider for instance (and association) operations. The default
663 setting is "true", so the default behavior has not been changed. To
664 disable the repository as the default instance provider, issue the
665 following command before starting cimserver:
666
667 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
668
669 The repositoryProviderName configuration property specifies what
670 provider name is used to explicitly register the repository as a
671 provider. This is necessary when the repository needs to serve
672 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
673 to "false". The default value is "repository". To register the
674 repository as an instance provider for a class, add a
675 'Provider("repository")' qualifier to the class definition.
676
677 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
678 pass to providers that act as services. This handle provides
679 service providers with access to the CIMServer data structures.
680
681 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
682 the repository so that it respects the IncludeQualifiers and
683 PropertyList parameters. Updated SetProperty in the repository
684 so that it uses ModifyInstance correctly. The repository now
685 supports GetProperty and SetProperty in addition to ModifyInstance.
686
687 Implemented GetProperty and SetProperty in the Dispatcher and
688 Provider2 so that they get translated to GetInstance and
689 ModifyInstance calls (respectively) in the provider. Providers
690 written to the Provider2 API that correctly process the new
691 ModifyInstance parameters will automatically support SetProperty
692 operations. Note that GetProperty and SetProperty currently only
693 mike 1.51 work for String properties because of an XML encoding limitation.
694
695 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
696 Security components for authentication and authorization.
697
698 Authentication and User Management:
699 cimuser CLI : This CLI is used for addition, modification, removal
700 and listing of CIM Users. The CIM user password is encrypted and stored
701 in a file. The password file format is compatible with Apache's htpasswd
702 generated password file.
703
704 cimauth CLI implement the authorization managment functionality by letting
705 to add/remove/list user authorizations.
706
707 User Manager and User Manager Provider components implement the user
708 management and authorization functionality.
709
710 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
711 under src/Pegasus/WQL which contains library and BNF.
712
713 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
714 mike 1.51 which does provider registration, block, unblock, and stop a provider.
715 It also alert Subscription Service of any provider registration changes.
716
717 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
718 and String.cpp with PEG_min. The _min macro caused problems on the
719 NSK platform because of a duplicate definition in a standard file.
720
721 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
722 subscription service provider that serves as the instance provider for the
723 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
724 classes (from CIM_Events27.mof). The service also takes appropriate action
725 in response to startup, shutdown of the cimom, termination of a provider,
726 or change in provider registration.
727
728 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
729 and the command line interface for shutting down cimom gracefully.
730 For more information, refer to the CIMOM Shutdown working paper
731 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
732
733 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
734 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
735 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
736 constructor to set a pointer to the server-, resp. client wide SSL_Context
737 structure. The Socket field in HTTPConnection is substituted with an
738 MP_Socket pointer, a class that is designed to hide the differences
739 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
740 is defined even in a non-ssl environment.
741 How to use it in a Server or Client:
742 1. Just create an SSL_Context once per Server/Client address space
743 2. Construct every HTTPConnector/Acceptor with a pointer to this
744 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
745 without SSL_Context for conventional connections.
|
746 mike 1.50
|
747 mike 1.51 The Configuration data was extended with the boolean SSL property, and
748 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
749
750 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
751 kumpf 1.61
|
752 mike 1.51 ---------------------------------------------------------------------------
753 Version 1.1 - July 2001 Development branch
754 Tagged as version_1_01 on 3 August 2001 (sorry should have been
755 1.1
756
757 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
758 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
759 and ExportClient classes. the indication.
760
761 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
762 make the delivery of indications over Xml-HTTP and email respectively.
763
764 Provided examples for HandlerTable, XmlIndicationDelivery and
765 SendMailIndicationDelivery to support this implementation.
766
767 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
768 library and a thread-safe message queue (first stage). Classes defined
769 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
770 and SimpleThread.
771
772 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
773 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
774 information on using wbemexec. A simple test script is included. Please
775 see pegasus/src/Clients/wbemexec/tests/readme for information on running
776 the test script.
777
778 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
779 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
780 and
781 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
782 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
783 src/Pegasus/Common/TraceFileHandler.cpp.
784
785 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
786 Config CLI. Please refer to the documentation
787 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
788 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
789 using the config framework and cimconfig CLI. Make sure to load the config
790 mof (src/gmake config) before starting the cimserver. A simple test script
791 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
792 information on running the test script.
793
794 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
795 (changed the H and CPP files for the major CIM objects. These
796 functions generate CIM MOF output for the objects.
797
798 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
799 Authentication provides security mechanism to authenticates CIM clients
800 that
801 connect to CIM Server on the same system without having to specify a
802 password.
803 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
804 This component only works on unix and it's not linked in with the main
805 build.
806 When authentication framework is defined this component may need to be
807 modified to integrate with the framework.
|
808 karl 1.49
809 ---------------------------------------------------------------------------
810 Version 0.99.x (Fixes to version 0.99) in Process
|
811 mike 1.51
|
812 karl 1.49 NOTE: Please do not input anything to this branch except for critical
813 fixes. This is, in effect, 1.0 and we do not want to use it for
814 development.
815
816 ----------------------------------------------------------------------------
817
818 Version 0.98.0 - Work in progress (This number skipped)
|
819 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
820 mike 1.36
|
821 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
822 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
823
|
824 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
825 in the HTML URL reference for passing instance names.
826
|
827 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
828
829 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
830
|
831 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
832 allow slp to compile.
833
|
834 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
835
836 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
837 ids to queue pointers).
838
|
839 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
840 and Dispatcher.
841
|
842 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
843 and
844 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
845 chip 1.44 ResponseHandler for Provider2 interface.
|
846 mike 1.45
847 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
848
849 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
850
|
851 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
852
|
853 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
854
855 12. (Mike Brasher) - Fixed compiler error on Linux.
856
|
857 karl 1.38 ------------------------------------------------------------------------------
858 --
|
859 mike 1.26
|
860 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
861 karl 1.16
862 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
863 for NT and Linux platforms.
|
864 mike 1.26
|
865 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
866 5988.
867 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
868 the DMTF.
|
869 mike 1.26
|
870 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
871 Fusion event. THis included a) extended the test for end of HTTP header from
872 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
873 Extended the HTTP message ID to allow for non-numeric message IDs.
|
874 mike 1.26
|
875 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
876 and created RepositoryDeclContext.{cpp,h}. This is the first step in
877 revamping the compiler to work independently of the repository (grb).
|
878 mike 1.26
|
879 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
880 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
881 Now when you build normally, you will get the committed grammar and parser
882 files instead of generating your own for a particular platform. This should
883 prevent back-level lex and yacc implementations from generating troublesome
884 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
885 bob 1.20 (grb)
|
886 mike 1.26
|
887 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
888 This change paves the way for upcoming changes that will allow the compiler
889 to work indepently of the repository. (grb)
|
890 mike 1.26
|
891 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
892 mike 1.26
|
893 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
894 modifyClass,
|
895 chip 1.22 createClass to protect caller's object.
|
896 mike 1.26
|
897 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
898 directory. These
899 interfaces allow very smart providers to perform advances operations.
900 CIMProviderStub has
|
901 chip 1.23 been updated to support the new interfaces. Needs testing.
|
902 mike 1.26
|
903 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
904 mike 1.26
|
905 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
906 repository you make world, make rebuild or make repository. ks
|
907 mike 1.26
908 12. Added associators() and associatorNames() operations to CIM repository.
|
909 mike 1.27 (MEB)
910
911 13. More on association implementation (all four operations supported).
912 Need to handle deletion of associations and protocol stubs still.
913 Need to test class associations (rather than just instance associations).
914 Need to handle deleteInstance().
915 (MEB)
|
916 mike 1.26
|
917 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
918
|
919 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
920 AssociationName
|
921 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
922 pages.
923
|
924 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
925 sage 1.31
926 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
927 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
928 Made cimserver accept the -D flag to eliminate the need for environment
929 variables.
|
930 mike 1.32
931 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
932 References() and ReferenceNames() CIM operations. These only operate
933 on instances at this time. They will operate on classes soon.
|
934 kumpf 1.34
935 19. (Mike Glantz) Extended and modified dynamic support
936 changes to (1) work on HP-UX and (2) have all images and libraries
937 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
938 change is to program.mak and library-unix.mak, removing specific
939 lists of dynamic library specs and putting them in the Makefile
940 and libraries.mak files that build the actual targets (lots of
941 these now have DYNAMIC_LIBRARIES defined).
|
942 karl 1.35
943 20. (Karl) added basic Queue function to common (based on array) and added
944 tests for stack and queue.
|
945 karl 1.38
946 ------------------------------------------------------------------------------
947 --
|
948 mike 1.36
|
949 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
950 karl 1.11
|
951 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
952 CIMServer (both)
|
953 karl 1.11 Functions added include:
954 a. Enable trace to log file.
|
955 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
956 is
|
957 karl 1.11 trace to log, -t is trace to console).
958 c. add parameter in optionsrow for help message and enable the capture
|
959 karl 1.12 of these messages in Options class. Also added help print that
960 prints these things out. However, format not to beautiful.
|
961 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
962 e. Extend the Clients\testclient so he does tests on Namespace.
|
963 karl 1.15 2. (KS)Extended Log to show time, severity.
|
964 mike 1.33
|
965 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
966 mike 1.33
|
967 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
968 logs
|
969 karl 1.12 are put
|
970 mike 1.33
|
971 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
972 This is a preliminary version.
|
973 mike 1.33
|
974 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
975 karl 1.13 throws CannotBind exception.
|
976 mike 1.33
|
977 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
978 not
|
979 karl 1.14 print out all of the message. At the least it prints out the error message
980 and components of the message causing the problem.
|
981 mike 1.33
|
982 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
983 mike 1.33
|
984 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
985 karl 1.14 existed.
|
986 mike 1.33
987 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
988 karl 1.15
|
989 karl 1.29 ------------------------------------------------------------------------------
990 --
|
991 karl 1.6 Version 0.97.2
992
993 1. Extend HP UX port to correctly load Dynamic Load Libraries.
994 2. Extend Formatter for Boolean and Uint32 types.
995 3. Change CIM Server to use Trace (-t) flag. This also changed
996 Handler.h to work off of flag.
997 4. Minor corrections to __Namespace Provider.
998 5. Extend tests for Formatter, String, and other modules.
999 6. Correct errors in documentation.
1000 7. New working papers (provider interface).
|
1001 karl 1.8 8. Add Providerreg.exe tool.
1002 9. Add trace output for messages sent from the Server.
|
1003 mike 1.26
|
1004 karl 1.29 ------------------------------------------------------------------------------
1005 --
|
1006 mike 1.26
|
1007 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1008 karl 1.5
|
1009 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1010 find functions. Note: This symbol is defined in config.h. (ks).
1011
|
1012 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1013 of dynamic lib loaading.
|
1014 karl 1.1
1015
|
1016 karl 1.29 ------------------------------------------------------------------------------
1017 --
|
1018 mike 1.26
|
1019 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1020 karl 1.1
1021 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1022 qualifiers, methods.
1023 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1024 methods.
1025 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1026 qualifiers and to
1027 remove qualifiers.
1028 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1029 compiler. It probably imposed more limitations than would be required with
|
1030 karl 1.2 the current compiler. This version of the port produces an excessively large
1031 common module due to template bloat. That problem will be fixed in a future
1032 change to the port. Also there are a log of duplicate symbol warnings generate
1033 by the AIC compiler but these cause no problems. The port has been tested
1034 with the complete unit test and client/server test successfully.
|
1035 karl 1.1
1036 --------------------------------------------------------------------------
|
1037 karl 1.2
|
1038 mike 1.4 23 May 2001
|
1039 karl 1.1
|
1040 mike 1.9 1. Ported to HPUX
|
1041 karl 1.5
|
1042 mike 1.9 --------------------------------------------------------------------------
1043
1044 29 May 2001
1045
1046 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1047 mike 1.51
1048
1049
1050
|
1051 karl 1.48
|
1052 karl 1.38
|
1053 karl 1.30
|
1054 karl 1.29
|
1055 mike 1.10
|