1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.73 17. (Yi Zhou - HP) 4 March 2002 - Implemented provider registration manager
164 to perform efficient lookup of instance provider, method provider, and
165 indication provider. Also, implemented provider registration instances
166 operations.
167
168 Modified registration provider to use latest provider registration schema.
|
169 kumpf 1.68
|
170 karl 1.59 -------------------------------------------------------------------
|
171 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
172
173 1. Merged back to Main branch. All general development will be in main branch
174 in the future with releases in side branches. Special side developments
175 may temporarily be in side branches.
176 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
177 karl 1.53
178 2. (Karl) 18 December 2001 - Added new directory repositories where repository
179 implementations will be kept to separate them from the
180 repository interface defintion. Initial implementation is genericfile
181 which is the current file based repository.
182
183 Added new build variable RMREPOSITORY which is a generic MAKE command
184 to remove an existing repository. It simply substitutes for the RMDIRHIER
185 command at this point but we will make this a generic part of system
186 in the future.
|
187 karl 1.52
|
188 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
189 to check that all required parameters for intrinsic methods are
190 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
191 exception is thrown. Also added checks for duplicate parameters in the
192 intrinsic methods. If a parameter is specified more than once, a
193 CIM_ERR_INVALID_PARAMETER exception is thrown.
194
|
195 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
196 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
197 queue to this new queue. Modified CIMServer.cpp to create
198 CIMOperationRequestAuthorizer queue only when authorization is enabled.
199 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
200 it available to the CIMOperationRequestDispatcher.
201
|
202 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
203 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
204 forever. The problem was noticed when the TestClient program and CIMserver
205 service were both running. The service wasn't accessible to the TestClient
206 program.
207
|
208 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
209 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
210 in new queue, IndicationService which will get invoked from dispatcher.
211 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
212 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
213 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
214 CIM_GET_INSTANCE_REQUEST_MESSAGE
215 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
216 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
217
218 This new service will also take care of processing the indications on receiving
219 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
220 IndicationProvider or some other mechanism which is not yet clear.
221
222 IndicationService will also receive following messages from PG_ProviderRegistration
223 when a new IndicationProvider will get registered.
224 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
225 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
226
227 I had also defined new Indication Provider APIs, enableIndication, disableIndication
228 and modifyIndication with more parameters passed and eventually planning to terminate
229 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
230 plan to implement one more call as startIndication and will be done soon.
231
232 There are three new test programs in IndicationService directory, which will create
233 Filter, Indication and Subscription instances using IndicationService.
234
235 Also modified sample IndicationProvider code with the new APIs introduced.
|
236 mary 1.56
|
237 karl 1.52 -------------------------------------------------------------------------
|
238 karl 1.1
|
239 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
240 current working dev branch of build
|
241 mike 1.36
|
242 karl 1.49 ---------------------------------------------------------------------------
243 Version 1.1 - July 2001 Development branch (Work in PRogress)
244
|
245 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
246 PARAMETER.REFERENCE constructs for references).
247
248 2. (Mike Brasher) Reworked server communication into new module scheme.
|
249 mike 1.51 =======
250 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
251 seen as part of CGIclient class displays.
252
253 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
254 to the final version in Schemas\CIM25. This included minor
255 corrections, etc and a couple of file changes. This is the
256 official final CIM 25 schema relesed by the DMTF. This change
257 should not affect any current work.
258 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
259 directorys. Note however that today the make repository still
260 loads the 2.5 schema.
261
262 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
263 on XML output.
264
265 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
266 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
267 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
268 declarations in for loop initializers outside the loop, so multiple
269 "for (int i=0; i<10; i++);" statements cause a compile error.
270 mike 1.51
271 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
272 dependency on the config files at the start of the cimserver. Now the
273 cimserver will use in-memory default values in the absence of config files
274 and command line options. Fixed a few defects in the config framework that
275 were causing cimom to crash under certain conditions. Changed the config
276 provider class name to 'PG_ConfigSetting' in the mof file and modified
277 provider implementation files accordingly. Also modified the config CLI
278 to show user friendly error/status messages.
279
280 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
281 (reported incorrect line number on error in XML request if input redirected).
282 Enhanced the -d debug command line option to allow more flexibility in
283 generating debug output.
284
285 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
286 xml when it generates xml output.
287
288 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
289 a common file to reduce the number of files required by the default
290 repository implementation.
291 mike 1.51
292 10. (Mike Brasher) - Fixed minor bug in repository implementation.
293
294 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
295
296 12. (Mike Brasher) - Committed rework of server into queue approach.
297
298 13. (Mike Brasher) - New webserver and webclient examples.
299
300 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
301
302 15. (Mike Brasher) - Initial work on refactorying client into modules.
303 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
304
305 16. (Mike Brasher) - queue-based clients now complete.
306
307 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
308
309 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
310
311 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
312 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
313 a web server. See doc/Servlet for more information.
314
315 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
316 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
317 input and output can be written in a trace file.
318
319 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
320 Created new class SignalHandler that allow registration, activation and
321 deactivation of signal handler functions (Linux only !).
322
323 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
324 ExportClient to support ExportIndication. DisplayConsumer, a sample
325 consumer is added which will consume (by displaying on screen) the
326 indication exported by CIMExportRequestDispatcher. This complete
327 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
328 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
329 are modified to implement above messages.
330
331 XmlIndicationDispatcher test program is modified to test complete
332 operation. It now creates a consumer, handler and indication
333 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
334 indication to consumer. This program needs
335 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
336 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
337 in the repository to complete the test successfully. This test
338 program also needs Handler qualifier defined in repository and
339 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
340 below:
341
342 //====================================================================
343 // CIM_IndicationHandlerXMLHTTP
344 //====================================================================
345 [Description (
346 "CIM_IndicationHandlerXMLHTTP describes the destination for "
347 "Indications to be delivered via HTTP, using a cimXML "
348 "representation."), Handler ("CIMxmlIndicationHandler") ]
349
350 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
351 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
352 a provider library.
353
354 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
355 interface for the provider. InvokeMethod currently uses CIMValue as
356 type for inParameters and outParameters, which are unable to give
357 information about param name, type and value. This should be changed
358 to CIMParamValue which will help providers to know details of the
359 parameter name and type along with value passed through InvoleMethod
360 call. Current implementation uses CIMParamValue as parameters while
361 travelling through message queues and converts it back to array of
362 CIMValue before calling Provider API (which needs to be changed
363 later).
364
365 Also added are two test programs:
366
367 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
368 CIMParamValue class.
369
370 src/Pegasus/Client/tests/InvokeMethod - which makes call to
371 InvokeMethod and displays the return value. Current
372 implementation assumes that provider had returned true value
373 and outParameters (which are now hard coded in
374 CIMOperationRequestDispatcher to implement functionality)
375 mike 1.51 which are passed as response of InvokeMethod to client.
376
377 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
378 authentication to the pegasus code. Created an Authentication Manager
379 and authenticator interfaces. The file based local authentication
380 module has been modified to implement the local authenticator
381 interface, to generate the challenge for the unauthorized requests
382 and to verify the authentication.
383
384 A skeleton program has been created for the Basic Authenticator.
385 This code is in the Security/Authentication directory which is not
386 yet linked into the build.
387
388 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
389 Decoders. Earlier decoders were sending requests and responses
390 before finishing complete Xml parse. This was prone to send
391 request/response even the Xml is wrong after the MethodCall.
392 New changes collects the Message* as return value from the
393 appropriate functions while parsing the Xml and sends on
394 _outputQueue only when Xml is parsed successfully.
395
396 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
397 fix the problem with constructing provider name and loading the
398 providers for unix platforms. Also moved the shared library name
399 construction (appending .sl or .so) from
400 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
401 ProviderModule.cpp and included it in a method that returns
402 provider file path name.
403
404 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
405 Handler. This handler extracts MappingStrings qualifier from class
406 definition and converts it into SNMP specific trap data. The trap
407 structure is defined in a abstract class in snmpDeliverTrap.h file.
408 Every one has his or her own SNMP agent, which will talk with master
409 agent to deliver the trap or may have some other mechanism.
410 Extending snmpDeliverTrap class and deliverTrap method will help to
411 implement specific trap delivery mechanism.
412
413 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
414 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
415 property value to be default in the plan file, remove the property from the
416 plan file. Converted ConfigSettingProvider to use provider2 library.
417 mike 1.51
418 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
419 to allow tracing of a specific number of bytes in a given
420 string. Also modified the XmlIO trace code to use the new interface.
421 Changed the config file defaults for tracing.
422
423 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
424 NonStop platform (NSK) in directory pegasus/mak. The following files
425 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
426 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
427 program-unix.mak. The original program.mak which previously covered
428 all platforms was split into platform-specific make files, and now
429 only contains conditionals. Files config.mak, objects.mak, and
430 library.mak were changed to include the NSK files.
431 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
432
433 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
434 commas (,) in the string values of key properties.
435
436 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
437
438 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
439 pegasus/mak/program-windows.mak that prevented program builds for
440 the windows platform (related to change from 28 Oct). Replaced
441 leading whitespace in front of commands with tabs as required
442 in make files.
443
444 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
445 because getting an error in 26
446
447 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
448 whose types are references. These reference values must be
449 treated specially in the XML encoding, using the VALUE.REFERENCE
450 tag structure.
451
452 Pegasus had been passing reference values simply as String values.
453 For example, EnumerateInstanceNames returned KEYVALUEs of string
454 type rather than VALUE.REFERENCEs.
455
456 I've modified the XmlReader::getKeyBindingElement() and
457 CIMReference::instanceNameToXml() methods to read and write the
458 XML in the proper format. However, making that change required
459 mike 1.51 that a CIMReference object be able to distinguish between a key
460 of String type and a key of reference type.
461
462 I've modified the String format of CIMReferences slightly to
463 allow efficient processing of references whose keys are also of
464 reference type. The "official" form uses the same encoding for
465 key values of String type and of reference type, and so it
466 would be necessary to retrieve the class definition and look up
467 the types of the key properties to determine how to treat the
468 key values. This is clearly too inefficient for internal
469 transformations between CIMReferences and String values.
470
471 The workaround is to encode a 'R' at the beginning of the value
472 for a key of reference type (before the opening '"'). This allows
473 the parser to know a priori whether the key is of String or
474 reference type.
475
476 In this example:
477
478 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
479
480 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
481 the usual encoding. Key2 is a reference property, so the extra 'R'
482 is inserted before its encoded value. Note that this algorithm is
483 recursive, such that RefClass could include KeyC of reference type,
484 which would also get encoded with the 'R' notation.
485
486 The toString() method inserts the 'R' to provide symmetry. A new
487 KeyBinding type (REFERENCE) has been defined to denote keys in a
488 CIMReference that are of reference type. This KeyBinding type must
489 be used appropriately for CIMReference::ttoString() to behave
490 correctly.
491
492 The files that have been modified to make this change are
493 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
494
495 A result of this change is that instances names in the instance
496 repository will include this extra 'R' character. Thus, you will
497 need to repopulate your repository when you download the latest
498 CIMOM version.
499
500 Note that for user-facing uses of the String encoding of instance
501 mike 1.51 names (such as might appear in MOF for static association
502 instances or in the CGI client), this solution is non-standard and
503 therefore unacceptable. It is likely that these points will need
504 to process the more expensive operation of retrieving the class
505 definition to determine the key property types.
506
507 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
508 in case of error in setting trace components. Modified the property owner
509 init and update methods. Submitted the pegasus/mak/Buildmakefile with
510 cleanbuild, rebuild and trace configuration options.
511
512 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
513 (instanceName).
514
515 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
516 GetProperty/SetProperty/EnumerateInstances request/response messages.
517 Added encoding and decoding of PropertyList parameters on all
518 relevant intrinsic methods.
519
520 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
521 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
522 mike 1.51
523 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
524 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
525 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
526 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
527 SystemNsk.cpp) contain stubs. The associated control files
528 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
529 nsk platform links.
530
531 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
532 toString() method for CIMValues of String type. The old behavior
533 returned an XML encoding of the String with special characters
534 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
535 would be returned as a"b. The new behavior just returns the
536 String value directly with no translation. (Note that
537 CIMValue.toXml() may still be used to get the XML-encoded value.)
538
539 This change was necessary in part to correct the behavior of the
540 repository. CreateInstance stores the instance name returned by
541 CIMInstance.getInstanceName(), which is built using calls to
542 CIMValue.toString(). GetInstance searches for the instance name
543 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
544 be successful, CreateInstance must have stored the instance name
545 in that same form, without special character encoding.
546
547 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
548 the CIMValue class. Eliminated improper use of CIMValue.toString(),
549 often replacing with CIMValue.get(String&) or CIMValue.toXml().
550 Also added some error handling in the indication handlers.
551
552 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
553 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
554 to handle local instance path and local classpath. Modified the
555 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
556 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
557
558 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
559 to hold the argument to ModifyInstance and the return values
560 from EnumerateInstances. The client and provider APIs need to
561 be updated to use this class.
562
563 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
564 mike 1.51 source files. This CLI allows addition, modification, removal and listing
565 of CIM users. The CLI is not linked to the main makefile as the Provider
566 functionality is yet to be implemented. Added the function
567 String getPassword(char* prompt) to the System.h and cpp files.
568
569 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
570 the server to challenge the unauthorized requests, authenticate
571 the challenge responses, and verify the subsequent authorized requests.
572 Implemented authentication mechanism on the Client api to send
573 responses to the challenges from the server. Current implementation
574 supports only 'local' authentication mechanism.
575
576 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
577
578 - Changed the return value of EnumerateInstances from Array<CIMInstance>
579 to Array<CIMNamedInstance>
580 - Changed the parameter to ModifyInstance from CIMInstance to
581 CIMNamedInstance
582 - Added an optional PropertyList parameter to ModifyInstance
583 - Changed all handling of PropertyList parameters to use the
584 CIMPropertyList class instead of Array<String>
585 mike 1.51
586 Each of these changes was required to comply with the DMTF specification.
587
588 These changes were made throughout the system except for in the provider
589 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
590 differences from providers, so older providers will continue to function.
591 However, this means that clients can not yet take advantage of the added
592 functionality.
593
594 When the provider API is updated, the following changes will be visible:
595
596 - Providers will get a PropertyList parameter to ModifyInstance which
597 they are required to respect. Providers that can not process the
598 PropertyList must throw a NOT_SUPPORTED exception whenever the
599 list is not null. Clients can take advantage of this change by
600 issuing a ModifyInstance request against a selected set of
601 properties in an instance, rather than being required to replace
602 the entire instance.
603
604 - Providers will be required to return instance names along with
605 instances in the EnumerateInstances method. Clients will receive
606 mike 1.51 these instance names, as the standard dictates.
607
608 - Providers will receive a CIMPropertyList argument containing the
609 PropertyList instead of an Array<String>. This change allows
610 providers to distinguish between an empty list and a null list.
611
612 Note that the repository also does not yet handle the PropertyList in
613 ModifyInstance correctly.
614
615 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
616 provider API to match the changes made to the EnumerateInstances and
617 ModifyInstance operations. These changes were made to comply with
618 the DMTF specification.
619
620 The original Provider API has not been updated, and I have no
621 plans to do so. Providers written to the original API will
622 continue to function, but they will not have the opportunity
623 to take advantage of the features that have been added.
624
625 The significant changes to the Provider2 API are:
626
627 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
628 they are required to respect. Providers that can not process the
629 PropertyList must throw a NOT_SUPPORTED exception whenever the
630 list is not null. Clients can take advantage of this change by
631 issuing a ModifyInstance request against a selected set of
632 properties in an instance, rather than being required to replace
633 the entire instance.
634
635 - Providers will get an IncludeQualifiers parameter to ModifyInstance
636 which they are required to respect. If IncludeQualifiers is
637 false, the qualifiers on the modified instance provided must not
638 be used to update the instance.
639
640 - Providers will be required to return instance names along with
641 instances in the EnumerateInstances method. Clients will receive
642 these instance names, as the standard dictates.
643
644 The providers that are in the Pegasus build have all been updated.
645 However, whenever the PropertyList is not null, the providers throw
646 a NOT_SUPPORTED exception.
647
648 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
649 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
650 the Common module. File Config.h was modified to include the NSK
651 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
652 without the standard (std) namespace.
653
654 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
655 properties to support alternate behavior of the Pegasus repository:
656 repositoryIsDefaultInstanceProvider and repositoryProviderName.
657
658 Using the first one, the repository can be enabled/disabled as the
659 default provider for instance (and association) operations. The default
660 setting is "true", so the default behavior has not been changed. To
661 disable the repository as the default instance provider, issue the
662 following command before starting cimserver:
663
664 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
665
666 The repositoryProviderName configuration property specifies what
667 provider name is used to explicitly register the repository as a
668 provider. This is necessary when the repository needs to serve
669 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
670 to "false". The default value is "repository". To register the
671 repository as an instance provider for a class, add a
672 'Provider("repository")' qualifier to the class definition.
673
674 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
675 pass to providers that act as services. This handle provides
676 service providers with access to the CIMServer data structures.
677
678 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
679 the repository so that it respects the IncludeQualifiers and
680 PropertyList parameters. Updated SetProperty in the repository
681 so that it uses ModifyInstance correctly. The repository now
682 supports GetProperty and SetProperty in addition to ModifyInstance.
683
684 Implemented GetProperty and SetProperty in the Dispatcher and
685 Provider2 so that they get translated to GetInstance and
686 ModifyInstance calls (respectively) in the provider. Providers
687 written to the Provider2 API that correctly process the new
688 ModifyInstance parameters will automatically support SetProperty
689 operations. Note that GetProperty and SetProperty currently only
690 mike 1.51 work for String properties because of an XML encoding limitation.
691
692 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
693 Security components for authentication and authorization.
694
695 Authentication and User Management:
696 cimuser CLI : This CLI is used for addition, modification, removal
697 and listing of CIM Users. The CIM user password is encrypted and stored
698 in a file. The password file format is compatible with Apache's htpasswd
699 generated password file.
700
701 cimauth CLI implement the authorization managment functionality by letting
702 to add/remove/list user authorizations.
703
704 User Manager and User Manager Provider components implement the user
705 management and authorization functionality.
706
707 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
708 under src/Pegasus/WQL which contains library and BNF.
709
710 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
711 mike 1.51 which does provider registration, block, unblock, and stop a provider.
712 It also alert Subscription Service of any provider registration changes.
713
714 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
715 and String.cpp with PEG_min. The _min macro caused problems on the
716 NSK platform because of a duplicate definition in a standard file.
717
718 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
719 subscription service provider that serves as the instance provider for the
720 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
721 classes (from CIM_Events27.mof). The service also takes appropriate action
722 in response to startup, shutdown of the cimom, termination of a provider,
723 or change in provider registration.
724
725 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
726 and the command line interface for shutting down cimom gracefully.
727 For more information, refer to the CIMOM Shutdown working paper
728 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
729
730 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
731 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
732 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
733 constructor to set a pointer to the server-, resp. client wide SSL_Context
734 structure. The Socket field in HTTPConnection is substituted with an
735 MP_Socket pointer, a class that is designed to hide the differences
736 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
737 is defined even in a non-ssl environment.
738 How to use it in a Server or Client:
739 1. Just create an SSL_Context once per Server/Client address space
740 2. Construct every HTTPConnector/Acceptor with a pointer to this
741 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
742 without SSL_Context for conventional connections.
|
743 mike 1.50
|
744 mike 1.51 The Configuration data was extended with the boolean SSL property, and
745 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
746
747 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
748 kumpf 1.61
|
749 mike 1.51 ---------------------------------------------------------------------------
750 Version 1.1 - July 2001 Development branch
751 Tagged as version_1_01 on 3 August 2001 (sorry should have been
752 1.1
753
754 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
755 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
756 and ExportClient classes. the indication.
757
758 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
759 make the delivery of indications over Xml-HTTP and email respectively.
760
761 Provided examples for HandlerTable, XmlIndicationDelivery and
762 SendMailIndicationDelivery to support this implementation.
763
764 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
765 library and a thread-safe message queue (first stage). Classes defined
766 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
767 and SimpleThread.
768
769 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
770 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
771 information on using wbemexec. A simple test script is included. Please
772 see pegasus/src/Clients/wbemexec/tests/readme for information on running
773 the test script.
774
775 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
776 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
777 and
778 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
779 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
780 src/Pegasus/Common/TraceFileHandler.cpp.
781
782 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
783 Config CLI. Please refer to the documentation
784 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
785 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
786 using the config framework and cimconfig CLI. Make sure to load the config
787 mof (src/gmake config) before starting the cimserver. A simple test script
788 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
789 information on running the test script.
790
791 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
792 (changed the H and CPP files for the major CIM objects. These
793 functions generate CIM MOF output for the objects.
794
795 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
796 Authentication provides security mechanism to authenticates CIM clients
797 that
798 connect to CIM Server on the same system without having to specify a
799 password.
800 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
801 This component only works on unix and it's not linked in with the main
802 build.
803 When authentication framework is defined this component may need to be
804 modified to integrate with the framework.
|
805 karl 1.49
806 ---------------------------------------------------------------------------
807 Version 0.99.x (Fixes to version 0.99) in Process
|
808 mike 1.51
|
809 karl 1.49 NOTE: Please do not input anything to this branch except for critical
810 fixes. This is, in effect, 1.0 and we do not want to use it for
811 development.
812
813 ----------------------------------------------------------------------------
814
815 Version 0.98.0 - Work in progress (This number skipped)
|
816 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
817 mike 1.36
|
818 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
819 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
820
|
821 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
822 in the HTML URL reference for passing instance names.
823
|
824 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
825
826 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
827
|
828 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
829 allow slp to compile.
830
|
831 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
832
833 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
834 ids to queue pointers).
835
|
836 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
837 and Dispatcher.
838
|
839 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
840 and
841 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
842 chip 1.44 ResponseHandler for Provider2 interface.
|
843 mike 1.45
844 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
845
846 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
847
|
848 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
849
|
850 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
851
852 12. (Mike Brasher) - Fixed compiler error on Linux.
853
|
854 karl 1.38 ------------------------------------------------------------------------------
855 --
|
856 mike 1.26
|
857 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
858 karl 1.16
859 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
860 for NT and Linux platforms.
|
861 mike 1.26
|
862 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
863 5988.
864 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
865 the DMTF.
|
866 mike 1.26
|
867 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
868 Fusion event. THis included a) extended the test for end of HTTP header from
869 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
870 Extended the HTTP message ID to allow for non-numeric message IDs.
|
871 mike 1.26
|
872 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
873 and created RepositoryDeclContext.{cpp,h}. This is the first step in
874 revamping the compiler to work independently of the repository (grb).
|
875 mike 1.26
|
876 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
877 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
878 Now when you build normally, you will get the committed grammar and parser
879 files instead of generating your own for a particular platform. This should
880 prevent back-level lex and yacc implementations from generating troublesome
881 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
882 bob 1.20 (grb)
|
883 mike 1.26
|
884 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
885 This change paves the way for upcoming changes that will allow the compiler
886 to work indepently of the repository. (grb)
|
887 mike 1.26
|
888 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
889 mike 1.26
|
890 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
891 modifyClass,
|
892 chip 1.22 createClass to protect caller's object.
|
893 mike 1.26
|
894 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
895 directory. These
896 interfaces allow very smart providers to perform advances operations.
897 CIMProviderStub has
|
898 chip 1.23 been updated to support the new interfaces. Needs testing.
|
899 mike 1.26
|
900 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
901 mike 1.26
|
902 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
903 repository you make world, make rebuild or make repository. ks
|
904 mike 1.26
905 12. Added associators() and associatorNames() operations to CIM repository.
|
906 mike 1.27 (MEB)
907
908 13. More on association implementation (all four operations supported).
909 Need to handle deletion of associations and protocol stubs still.
910 Need to test class associations (rather than just instance associations).
911 Need to handle deleteInstance().
912 (MEB)
|
913 mike 1.26
|
914 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
915
|
916 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
917 AssociationName
|
918 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
919 pages.
920
|
921 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
922 sage 1.31
923 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
924 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
925 Made cimserver accept the -D flag to eliminate the need for environment
926 variables.
|
927 mike 1.32
928 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
929 References() and ReferenceNames() CIM operations. These only operate
930 on instances at this time. They will operate on classes soon.
|
931 kumpf 1.34
932 19. (Mike Glantz) Extended and modified dynamic support
933 changes to (1) work on HP-UX and (2) have all images and libraries
934 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
935 change is to program.mak and library-unix.mak, removing specific
936 lists of dynamic library specs and putting them in the Makefile
937 and libraries.mak files that build the actual targets (lots of
938 these now have DYNAMIC_LIBRARIES defined).
|
939 karl 1.35
940 20. (Karl) added basic Queue function to common (based on array) and added
941 tests for stack and queue.
|
942 karl 1.38
943 ------------------------------------------------------------------------------
944 --
|
945 mike 1.36
|
946 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
947 karl 1.11
|
948 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
949 CIMServer (both)
|
950 karl 1.11 Functions added include:
951 a. Enable trace to log file.
|
952 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
953 is
|
954 karl 1.11 trace to log, -t is trace to console).
955 c. add parameter in optionsrow for help message and enable the capture
|
956 karl 1.12 of these messages in Options class. Also added help print that
957 prints these things out. However, format not to beautiful.
|
958 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
959 e. Extend the Clients\testclient so he does tests on Namespace.
|
960 karl 1.15 2. (KS)Extended Log to show time, severity.
|
961 mike 1.33
|
962 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
963 mike 1.33
|
964 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
965 logs
|
966 karl 1.12 are put
|
967 mike 1.33
|
968 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
969 This is a preliminary version.
|
970 mike 1.33
|
971 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
972 karl 1.13 throws CannotBind exception.
|
973 mike 1.33
|
974 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
975 not
|
976 karl 1.14 print out all of the message. At the least it prints out the error message
977 and components of the message causing the problem.
|
978 mike 1.33
|
979 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
980 mike 1.33
|
981 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
982 karl 1.14 existed.
|
983 mike 1.33
984 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
985 karl 1.15
|
986 karl 1.29 ------------------------------------------------------------------------------
987 --
|
988 karl 1.6 Version 0.97.2
989
990 1. Extend HP UX port to correctly load Dynamic Load Libraries.
991 2. Extend Formatter for Boolean and Uint32 types.
992 3. Change CIM Server to use Trace (-t) flag. This also changed
993 Handler.h to work off of flag.
994 4. Minor corrections to __Namespace Provider.
995 5. Extend tests for Formatter, String, and other modules.
996 6. Correct errors in documentation.
997 7. New working papers (provider interface).
|
998 karl 1.8 8. Add Providerreg.exe tool.
999 9. Add trace output for messages sent from the Server.
|
1000 mike 1.26
|
1001 karl 1.29 ------------------------------------------------------------------------------
1002 --
|
1003 mike 1.26
|
1004 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
1005 karl 1.5
|
1006 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1007 find functions. Note: This symbol is defined in config.h. (ks).
1008
|
1009 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1010 of dynamic lib loaading.
|
1011 karl 1.1
1012
|
1013 karl 1.29 ------------------------------------------------------------------------------
1014 --
|
1015 mike 1.26
|
1016 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1017 karl 1.1
1018 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1019 qualifiers, methods.
1020 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1021 methods.
1022 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1023 qualifiers and to
1024 remove qualifiers.
1025 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1026 compiler. It probably imposed more limitations than would be required with
|
1027 karl 1.2 the current compiler. This version of the port produces an excessively large
1028 common module due to template bloat. That problem will be fixed in a future
1029 change to the port. Also there are a log of duplicate symbol warnings generate
1030 by the AIC compiler but these cause no problems. The port has been tested
1031 with the complete unit test and client/server test successfully.
|
1032 karl 1.1
1033 --------------------------------------------------------------------------
|
1034 karl 1.2
|
1035 mike 1.4 23 May 2001
|
1036 karl 1.1
|
1037 mike 1.9 1. Ported to HPUX
|
1038 karl 1.5
|
1039 mike 1.9 --------------------------------------------------------------------------
1040
1041 29 May 2001
1042
1043 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1044 mike 1.51
1045
1046
1047
|
1048 karl 1.48
|
1049 karl 1.38
|
1050 karl 1.30
|
1051 karl 1.29
|
1052 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc