1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
|
153 karl 1.72
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 karl 1.72
160 16 (KS) 4 March 2002 - Correct problem with array constants not picking up
161 all of the entires in the array. Bugzilla bug # 6.
162
|
163 kumpf 1.68
|
164 karl 1.59 -------------------------------------------------------------------
|
165 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
166
167 1. Merged back to Main branch. All general development will be in main branch
168 in the future with releases in side branches. Special side developments
169 may temporarily be in side branches.
170 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
171 karl 1.53
172 2. (Karl) 18 December 2001 - Added new directory repositories where repository
173 implementations will be kept to separate them from the
174 repository interface defintion. Initial implementation is genericfile
175 which is the current file based repository.
176
177 Added new build variable RMREPOSITORY which is a generic MAKE command
178 to remove an existing repository. It simply substitutes for the RMDIRHIER
179 command at this point but we will make this a generic part of system
180 in the future.
|
181 karl 1.52
|
182 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
183 to check that all required parameters for intrinsic methods are
184 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
185 exception is thrown. Also added checks for duplicate parameters in the
186 intrinsic methods. If a parameter is specified more than once, a
187 CIM_ERR_INVALID_PARAMETER exception is thrown.
188
|
189 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
190 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
191 queue to this new queue. Modified CIMServer.cpp to create
192 CIMOperationRequestAuthorizer queue only when authorization is enabled.
193 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
194 it available to the CIMOperationRequestDispatcher.
195
|
196 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
197 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
198 forever. The problem was noticed when the TestClient program and CIMserver
199 service were both running. The service wasn't accessible to the TestClient
200 program.
201
|
202 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
203 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
204 in new queue, IndicationService which will get invoked from dispatcher.
205 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
206 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
207 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
208 CIM_GET_INSTANCE_REQUEST_MESSAGE
209 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
210 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
211
212 This new service will also take care of processing the indications on receiving
213 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
214 IndicationProvider or some other mechanism which is not yet clear.
215
216 IndicationService will also receive following messages from PG_ProviderRegistration
217 when a new IndicationProvider will get registered.
218 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
219 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
220
221 I had also defined new Indication Provider APIs, enableIndication, disableIndication
222 and modifyIndication with more parameters passed and eventually planning to terminate
223 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
224 plan to implement one more call as startIndication and will be done soon.
225
226 There are three new test programs in IndicationService directory, which will create
227 Filter, Indication and Subscription instances using IndicationService.
228
229 Also modified sample IndicationProvider code with the new APIs introduced.
|
230 mary 1.56
|
231 karl 1.52 -------------------------------------------------------------------------
|
232 karl 1.1
|
233 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
234 current working dev branch of build
|
235 mike 1.36
|
236 karl 1.49 ---------------------------------------------------------------------------
237 Version 1.1 - July 2001 Development branch (Work in PRogress)
238
|
239 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
240 PARAMETER.REFERENCE constructs for references).
241
242 2. (Mike Brasher) Reworked server communication into new module scheme.
|
243 mike 1.51 =======
244 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
245 seen as part of CGIclient class displays.
246
247 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
248 to the final version in Schemas\CIM25. This included minor
249 corrections, etc and a couple of file changes. This is the
250 official final CIM 25 schema relesed by the DMTF. This change
251 should not affect any current work.
252 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
253 directorys. Note however that today the make repository still
254 loads the 2.5 schema.
255
256 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
257 on XML output.
258
259 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
260 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
261 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
262 declarations in for loop initializers outside the loop, so multiple
263 "for (int i=0; i<10; i++);" statements cause a compile error.
264 mike 1.51
265 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
266 dependency on the config files at the start of the cimserver. Now the
267 cimserver will use in-memory default values in the absence of config files
268 and command line options. Fixed a few defects in the config framework that
269 were causing cimom to crash under certain conditions. Changed the config
270 provider class name to 'PG_ConfigSetting' in the mof file and modified
271 provider implementation files accordingly. Also modified the config CLI
272 to show user friendly error/status messages.
273
274 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
275 (reported incorrect line number on error in XML request if input redirected).
276 Enhanced the -d debug command line option to allow more flexibility in
277 generating debug output.
278
279 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
280 xml when it generates xml output.
281
282 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
283 a common file to reduce the number of files required by the default
284 repository implementation.
285 mike 1.51
286 10. (Mike Brasher) - Fixed minor bug in repository implementation.
287
288 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
289
290 12. (Mike Brasher) - Committed rework of server into queue approach.
291
292 13. (Mike Brasher) - New webserver and webclient examples.
293
294 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
295
296 15. (Mike Brasher) - Initial work on refactorying client into modules.
297 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
298
299 16. (Mike Brasher) - queue-based clients now complete.
300
301 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
302
303 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
304
305 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
306 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
307 a web server. See doc/Servlet for more information.
308
309 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
310 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
311 input and output can be written in a trace file.
312
313 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
314 Created new class SignalHandler that allow registration, activation and
315 deactivation of signal handler functions (Linux only !).
316
317 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
318 ExportClient to support ExportIndication. DisplayConsumer, a sample
319 consumer is added which will consume (by displaying on screen) the
320 indication exported by CIMExportRequestDispatcher. This complete
321 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
322 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
323 are modified to implement above messages.
324
325 XmlIndicationDispatcher test program is modified to test complete
326 operation. It now creates a consumer, handler and indication
327 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
328 indication to consumer. This program needs
329 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
330 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
331 in the repository to complete the test successfully. This test
332 program also needs Handler qualifier defined in repository and
333 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
334 below:
335
336 //====================================================================
337 // CIM_IndicationHandlerXMLHTTP
338 //====================================================================
339 [Description (
340 "CIM_IndicationHandlerXMLHTTP describes the destination for "
341 "Indications to be delivered via HTTP, using a cimXML "
342 "representation."), Handler ("CIMxmlIndicationHandler") ]
343
344 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
345 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
346 a provider library.
347
348 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
349 interface for the provider. InvokeMethod currently uses CIMValue as
350 type for inParameters and outParameters, which are unable to give
351 information about param name, type and value. This should be changed
352 to CIMParamValue which will help providers to know details of the
353 parameter name and type along with value passed through InvoleMethod
354 call. Current implementation uses CIMParamValue as parameters while
355 travelling through message queues and converts it back to array of
356 CIMValue before calling Provider API (which needs to be changed
357 later).
358
359 Also added are two test programs:
360
361 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
362 CIMParamValue class.
363
364 src/Pegasus/Client/tests/InvokeMethod - which makes call to
365 InvokeMethod and displays the return value. Current
366 implementation assumes that provider had returned true value
367 and outParameters (which are now hard coded in
368 CIMOperationRequestDispatcher to implement functionality)
369 mike 1.51 which are passed as response of InvokeMethod to client.
370
371 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
372 authentication to the pegasus code. Created an Authentication Manager
373 and authenticator interfaces. The file based local authentication
374 module has been modified to implement the local authenticator
375 interface, to generate the challenge for the unauthorized requests
376 and to verify the authentication.
377
378 A skeleton program has been created for the Basic Authenticator.
379 This code is in the Security/Authentication directory which is not
380 yet linked into the build.
381
382 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
383 Decoders. Earlier decoders were sending requests and responses
384 before finishing complete Xml parse. This was prone to send
385 request/response even the Xml is wrong after the MethodCall.
386 New changes collects the Message* as return value from the
387 appropriate functions while parsing the Xml and sends on
388 _outputQueue only when Xml is parsed successfully.
389
390 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
391 fix the problem with constructing provider name and loading the
392 providers for unix platforms. Also moved the shared library name
393 construction (appending .sl or .so) from
394 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
395 ProviderModule.cpp and included it in a method that returns
396 provider file path name.
397
398 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
399 Handler. This handler extracts MappingStrings qualifier from class
400 definition and converts it into SNMP specific trap data. The trap
401 structure is defined in a abstract class in snmpDeliverTrap.h file.
402 Every one has his or her own SNMP agent, which will talk with master
403 agent to deliver the trap or may have some other mechanism.
404 Extending snmpDeliverTrap class and deliverTrap method will help to
405 implement specific trap delivery mechanism.
406
407 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
408 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
409 property value to be default in the plan file, remove the property from the
410 plan file. Converted ConfigSettingProvider to use provider2 library.
411 mike 1.51
412 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
413 to allow tracing of a specific number of bytes in a given
414 string. Also modified the XmlIO trace code to use the new interface.
415 Changed the config file defaults for tracing.
416
417 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
418 NonStop platform (NSK) in directory pegasus/mak. The following files
419 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
420 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
421 program-unix.mak. The original program.mak which previously covered
422 all platforms was split into platform-specific make files, and now
423 only contains conditionals. Files config.mak, objects.mak, and
424 library.mak were changed to include the NSK files.
425 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
426
427 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
428 commas (,) in the string values of key properties.
429
430 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
431
432 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
433 pegasus/mak/program-windows.mak that prevented program builds for
434 the windows platform (related to change from 28 Oct). Replaced
435 leading whitespace in front of commands with tabs as required
436 in make files.
437
438 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
439 because getting an error in 26
440
441 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
442 whose types are references. These reference values must be
443 treated specially in the XML encoding, using the VALUE.REFERENCE
444 tag structure.
445
446 Pegasus had been passing reference values simply as String values.
447 For example, EnumerateInstanceNames returned KEYVALUEs of string
448 type rather than VALUE.REFERENCEs.
449
450 I've modified the XmlReader::getKeyBindingElement() and
451 CIMReference::instanceNameToXml() methods to read and write the
452 XML in the proper format. However, making that change required
453 mike 1.51 that a CIMReference object be able to distinguish between a key
454 of String type and a key of reference type.
455
456 I've modified the String format of CIMReferences slightly to
457 allow efficient processing of references whose keys are also of
458 reference type. The "official" form uses the same encoding for
459 key values of String type and of reference type, and so it
460 would be necessary to retrieve the class definition and look up
461 the types of the key properties to determine how to treat the
462 key values. This is clearly too inefficient for internal
463 transformations between CIMReferences and String values.
464
465 The workaround is to encode a 'R' at the beginning of the value
466 for a key of reference type (before the opening '"'). This allows
467 the parser to know a priori whether the key is of String or
468 reference type.
469
470 In this example:
471
472 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
473
474 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
475 the usual encoding. Key2 is a reference property, so the extra 'R'
476 is inserted before its encoded value. Note that this algorithm is
477 recursive, such that RefClass could include KeyC of reference type,
478 which would also get encoded with the 'R' notation.
479
480 The toString() method inserts the 'R' to provide symmetry. A new
481 KeyBinding type (REFERENCE) has been defined to denote keys in a
482 CIMReference that are of reference type. This KeyBinding type must
483 be used appropriately for CIMReference::ttoString() to behave
484 correctly.
485
486 The files that have been modified to make this change are
487 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
488
489 A result of this change is that instances names in the instance
490 repository will include this extra 'R' character. Thus, you will
491 need to repopulate your repository when you download the latest
492 CIMOM version.
493
494 Note that for user-facing uses of the String encoding of instance
495 mike 1.51 names (such as might appear in MOF for static association
496 instances or in the CGI client), this solution is non-standard and
497 therefore unacceptable. It is likely that these points will need
498 to process the more expensive operation of retrieving the class
499 definition to determine the key property types.
500
501 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
502 in case of error in setting trace components. Modified the property owner
503 init and update methods. Submitted the pegasus/mak/Buildmakefile with
504 cleanbuild, rebuild and trace configuration options.
505
506 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
507 (instanceName).
508
509 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
510 GetProperty/SetProperty/EnumerateInstances request/response messages.
511 Added encoding and decoding of PropertyList parameters on all
512 relevant intrinsic methods.
513
514 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
515 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
516 mike 1.51
517 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
518 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
519 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
520 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
521 SystemNsk.cpp) contain stubs. The associated control files
522 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
523 nsk platform links.
524
525 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
526 toString() method for CIMValues of String type. The old behavior
527 returned an XML encoding of the String with special characters
528 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
529 would be returned as a"b. The new behavior just returns the
530 String value directly with no translation. (Note that
531 CIMValue.toXml() may still be used to get the XML-encoded value.)
532
533 This change was necessary in part to correct the behavior of the
534 repository. CreateInstance stores the instance name returned by
535 CIMInstance.getInstanceName(), which is built using calls to
536 CIMValue.toString(). GetInstance searches for the instance name
537 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
538 be successful, CreateInstance must have stored the instance name
539 in that same form, without special character encoding.
540
541 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
542 the CIMValue class. Eliminated improper use of CIMValue.toString(),
543 often replacing with CIMValue.get(String&) or CIMValue.toXml().
544 Also added some error handling in the indication handlers.
545
546 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
547 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
548 to handle local instance path and local classpath. Modified the
549 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
550 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
551
552 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
553 to hold the argument to ModifyInstance and the return values
554 from EnumerateInstances. The client and provider APIs need to
555 be updated to use this class.
556
557 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
558 mike 1.51 source files. This CLI allows addition, modification, removal and listing
559 of CIM users. The CLI is not linked to the main makefile as the Provider
560 functionality is yet to be implemented. Added the function
561 String getPassword(char* prompt) to the System.h and cpp files.
562
563 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
564 the server to challenge the unauthorized requests, authenticate
565 the challenge responses, and verify the subsequent authorized requests.
566 Implemented authentication mechanism on the Client api to send
567 responses to the challenges from the server. Current implementation
568 supports only 'local' authentication mechanism.
569
570 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
571
572 - Changed the return value of EnumerateInstances from Array<CIMInstance>
573 to Array<CIMNamedInstance>
574 - Changed the parameter to ModifyInstance from CIMInstance to
575 CIMNamedInstance
576 - Added an optional PropertyList parameter to ModifyInstance
577 - Changed all handling of PropertyList parameters to use the
578 CIMPropertyList class instead of Array<String>
579 mike 1.51
580 Each of these changes was required to comply with the DMTF specification.
581
582 These changes were made throughout the system except for in the provider
583 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
584 differences from providers, so older providers will continue to function.
585 However, this means that clients can not yet take advantage of the added
586 functionality.
587
588 When the provider API is updated, the following changes will be visible:
589
590 - Providers will get a PropertyList parameter to ModifyInstance which
591 they are required to respect. Providers that can not process the
592 PropertyList must throw a NOT_SUPPORTED exception whenever the
593 list is not null. Clients can take advantage of this change by
594 issuing a ModifyInstance request against a selected set of
595 properties in an instance, rather than being required to replace
596 the entire instance.
597
598 - Providers will be required to return instance names along with
599 instances in the EnumerateInstances method. Clients will receive
600 mike 1.51 these instance names, as the standard dictates.
601
602 - Providers will receive a CIMPropertyList argument containing the
603 PropertyList instead of an Array<String>. This change allows
604 providers to distinguish between an empty list and a null list.
605
606 Note that the repository also does not yet handle the PropertyList in
607 ModifyInstance correctly.
608
609 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
610 provider API to match the changes made to the EnumerateInstances and
611 ModifyInstance operations. These changes were made to comply with
612 the DMTF specification.
613
614 The original Provider API has not been updated, and I have no
615 plans to do so. Providers written to the original API will
616 continue to function, but they will not have the opportunity
617 to take advantage of the features that have been added.
618
619 The significant changes to the Provider2 API are:
620
621 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
622 they are required to respect. Providers that can not process the
623 PropertyList must throw a NOT_SUPPORTED exception whenever the
624 list is not null. Clients can take advantage of this change by
625 issuing a ModifyInstance request against a selected set of
626 properties in an instance, rather than being required to replace
627 the entire instance.
628
629 - Providers will get an IncludeQualifiers parameter to ModifyInstance
630 which they are required to respect. If IncludeQualifiers is
631 false, the qualifiers on the modified instance provided must not
632 be used to update the instance.
633
634 - Providers will be required to return instance names along with
635 instances in the EnumerateInstances method. Clients will receive
636 these instance names, as the standard dictates.
637
638 The providers that are in the Pegasus build have all been updated.
639 However, whenever the PropertyList is not null, the providers throw
640 a NOT_SUPPORTED exception.
641
642 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
643 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
644 the Common module. File Config.h was modified to include the NSK
645 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
646 without the standard (std) namespace.
647
648 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
649 properties to support alternate behavior of the Pegasus repository:
650 repositoryIsDefaultInstanceProvider and repositoryProviderName.
651
652 Using the first one, the repository can be enabled/disabled as the
653 default provider for instance (and association) operations. The default
654 setting is "true", so the default behavior has not been changed. To
655 disable the repository as the default instance provider, issue the
656 following command before starting cimserver:
657
658 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
659
660 The repositoryProviderName configuration property specifies what
661 provider name is used to explicitly register the repository as a
662 provider. This is necessary when the repository needs to serve
663 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
664 to "false". The default value is "repository". To register the
665 repository as an instance provider for a class, add a
666 'Provider("repository")' qualifier to the class definition.
667
668 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
669 pass to providers that act as services. This handle provides
670 service providers with access to the CIMServer data structures.
671
672 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
673 the repository so that it respects the IncludeQualifiers and
674 PropertyList parameters. Updated SetProperty in the repository
675 so that it uses ModifyInstance correctly. The repository now
676 supports GetProperty and SetProperty in addition to ModifyInstance.
677
678 Implemented GetProperty and SetProperty in the Dispatcher and
679 Provider2 so that they get translated to GetInstance and
680 ModifyInstance calls (respectively) in the provider. Providers
681 written to the Provider2 API that correctly process the new
682 ModifyInstance parameters will automatically support SetProperty
683 operations. Note that GetProperty and SetProperty currently only
684 mike 1.51 work for String properties because of an XML encoding limitation.
685
686 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
687 Security components for authentication and authorization.
688
689 Authentication and User Management:
690 cimuser CLI : This CLI is used for addition, modification, removal
691 and listing of CIM Users. The CIM user password is encrypted and stored
692 in a file. The password file format is compatible with Apache's htpasswd
693 generated password file.
694
695 cimauth CLI implement the authorization managment functionality by letting
696 to add/remove/list user authorizations.
697
698 User Manager and User Manager Provider components implement the user
699 management and authorization functionality.
700
701 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
702 under src/Pegasus/WQL which contains library and BNF.
703
704 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
705 mike 1.51 which does provider registration, block, unblock, and stop a provider.
706 It also alert Subscription Service of any provider registration changes.
707
708 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
709 and String.cpp with PEG_min. The _min macro caused problems on the
710 NSK platform because of a duplicate definition in a standard file.
711
712 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
713 subscription service provider that serves as the instance provider for the
714 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
715 classes (from CIM_Events27.mof). The service also takes appropriate action
716 in response to startup, shutdown of the cimom, termination of a provider,
717 or change in provider registration.
718
719 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
720 and the command line interface for shutting down cimom gracefully.
721 For more information, refer to the CIMOM Shutdown working paper
722 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
723
724 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
725 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
726 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
727 constructor to set a pointer to the server-, resp. client wide SSL_Context
728 structure. The Socket field in HTTPConnection is substituted with an
729 MP_Socket pointer, a class that is designed to hide the differences
730 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
731 is defined even in a non-ssl environment.
732 How to use it in a Server or Client:
733 1. Just create an SSL_Context once per Server/Client address space
734 2. Construct every HTTPConnector/Acceptor with a pointer to this
735 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
736 without SSL_Context for conventional connections.
|
737 mike 1.50
|
738 mike 1.51 The Configuration data was extended with the boolean SSL property, and
739 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
740
741 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
742 kumpf 1.61
|
743 mike 1.51 ---------------------------------------------------------------------------
744 Version 1.1 - July 2001 Development branch
745 Tagged as version_1_01 on 3 August 2001 (sorry should have been
746 1.1
747
748 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
749 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
750 and ExportClient classes. the indication.
751
752 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
753 make the delivery of indications over Xml-HTTP and email respectively.
754
755 Provided examples for HandlerTable, XmlIndicationDelivery and
756 SendMailIndicationDelivery to support this implementation.
757
758 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
759 library and a thread-safe message queue (first stage). Classes defined
760 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
761 and SimpleThread.
762
763 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
764 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
765 information on using wbemexec. A simple test script is included. Please
766 see pegasus/src/Clients/wbemexec/tests/readme for information on running
767 the test script.
768
769 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
770 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
771 and
772 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
773 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
774 src/Pegasus/Common/TraceFileHandler.cpp.
775
776 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
777 Config CLI. Please refer to the documentation
778 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
779 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
780 using the config framework and cimconfig CLI. Make sure to load the config
781 mof (src/gmake config) before starting the cimserver. A simple test script
782 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
783 information on running the test script.
784
785 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
786 (changed the H and CPP files for the major CIM objects. These
787 functions generate CIM MOF output for the objects.
788
789 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
790 Authentication provides security mechanism to authenticates CIM clients
791 that
792 connect to CIM Server on the same system without having to specify a
793 password.
794 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
795 This component only works on unix and it's not linked in with the main
796 build.
797 When authentication framework is defined this component may need to be
798 modified to integrate with the framework.
|
799 karl 1.49
800 ---------------------------------------------------------------------------
801 Version 0.99.x (Fixes to version 0.99) in Process
|
802 mike 1.51
|
803 karl 1.49 NOTE: Please do not input anything to this branch except for critical
804 fixes. This is, in effect, 1.0 and we do not want to use it for
805 development.
806
807 ----------------------------------------------------------------------------
808
809 Version 0.98.0 - Work in progress (This number skipped)
|
810 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
811 mike 1.36
|
812 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
813 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
814
|
815 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
816 in the HTML URL reference for passing instance names.
817
|
818 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
819
820 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
821
|
822 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
823 allow slp to compile.
824
|
825 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
826
827 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
828 ids to queue pointers).
829
|
830 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
831 and Dispatcher.
832
|
833 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
834 and
835 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
836 chip 1.44 ResponseHandler for Provider2 interface.
|
837 mike 1.45
838 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
839
840 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
841
|
842 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
843
|
844 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
845
846 12. (Mike Brasher) - Fixed compiler error on Linux.
847
|
848 karl 1.38 ------------------------------------------------------------------------------
849 --
|
850 mike 1.26
|
851 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
852 karl 1.16
853 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
854 for NT and Linux platforms.
|
855 mike 1.26
|
856 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
857 5988.
858 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
859 the DMTF.
|
860 mike 1.26
|
861 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
862 Fusion event. THis included a) extended the test for end of HTTP header from
863 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
864 Extended the HTTP message ID to allow for non-numeric message IDs.
|
865 mike 1.26
|
866 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
867 and created RepositoryDeclContext.{cpp,h}. This is the first step in
868 revamping the compiler to work independently of the repository (grb).
|
869 mike 1.26
|
870 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
871 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
872 Now when you build normally, you will get the committed grammar and parser
873 files instead of generating your own for a particular platform. This should
874 prevent back-level lex and yacc implementations from generating troublesome
875 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
876 bob 1.20 (grb)
|
877 mike 1.26
|
878 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
879 This change paves the way for upcoming changes that will allow the compiler
880 to work indepently of the repository. (grb)
|
881 mike 1.26
|
882 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
883 mike 1.26
|
884 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
885 modifyClass,
|
886 chip 1.22 createClass to protect caller's object.
|
887 mike 1.26
|
888 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
889 directory. These
890 interfaces allow very smart providers to perform advances operations.
891 CIMProviderStub has
|
892 chip 1.23 been updated to support the new interfaces. Needs testing.
|
893 mike 1.26
|
894 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
895 mike 1.26
|
896 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
897 repository you make world, make rebuild or make repository. ks
|
898 mike 1.26
899 12. Added associators() and associatorNames() operations to CIM repository.
|
900 mike 1.27 (MEB)
901
902 13. More on association implementation (all four operations supported).
903 Need to handle deletion of associations and protocol stubs still.
904 Need to test class associations (rather than just instance associations).
905 Need to handle deleteInstance().
906 (MEB)
|
907 mike 1.26
|
908 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
909
|
910 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
911 AssociationName
|
912 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
913 pages.
914
|
915 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
916 sage 1.31
917 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
918 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
919 Made cimserver accept the -D flag to eliminate the need for environment
920 variables.
|
921 mike 1.32
922 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
923 References() and ReferenceNames() CIM operations. These only operate
924 on instances at this time. They will operate on classes soon.
|
925 kumpf 1.34
926 19. (Mike Glantz) Extended and modified dynamic support
927 changes to (1) work on HP-UX and (2) have all images and libraries
928 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
929 change is to program.mak and library-unix.mak, removing specific
930 lists of dynamic library specs and putting them in the Makefile
931 and libraries.mak files that build the actual targets (lots of
932 these now have DYNAMIC_LIBRARIES defined).
|
933 karl 1.35
934 20. (Karl) added basic Queue function to common (based on array) and added
935 tests for stack and queue.
|
936 karl 1.38
937 ------------------------------------------------------------------------------
938 --
|
939 mike 1.36
|
940 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
941 karl 1.11
|
942 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
943 CIMServer (both)
|
944 karl 1.11 Functions added include:
945 a. Enable trace to log file.
|
946 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
947 is
|
948 karl 1.11 trace to log, -t is trace to console).
949 c. add parameter in optionsrow for help message and enable the capture
|
950 karl 1.12 of these messages in Options class. Also added help print that
951 prints these things out. However, format not to beautiful.
|
952 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
953 e. Extend the Clients\testclient so he does tests on Namespace.
|
954 karl 1.15 2. (KS)Extended Log to show time, severity.
|
955 mike 1.33
|
956 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
957 mike 1.33
|
958 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
959 logs
|
960 karl 1.12 are put
|
961 mike 1.33
|
962 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
963 This is a preliminary version.
|
964 mike 1.33
|
965 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
966 karl 1.13 throws CannotBind exception.
|
967 mike 1.33
|
968 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
969 not
|
970 karl 1.14 print out all of the message. At the least it prints out the error message
971 and components of the message causing the problem.
|
972 mike 1.33
|
973 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
974 mike 1.33
|
975 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
976 karl 1.14 existed.
|
977 mike 1.33
978 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
979 karl 1.15
|
980 karl 1.29 ------------------------------------------------------------------------------
981 --
|
982 karl 1.6 Version 0.97.2
983
984 1. Extend HP UX port to correctly load Dynamic Load Libraries.
985 2. Extend Formatter for Boolean and Uint32 types.
986 3. Change CIM Server to use Trace (-t) flag. This also changed
987 Handler.h to work off of flag.
988 4. Minor corrections to __Namespace Provider.
989 5. Extend tests for Formatter, String, and other modules.
990 6. Correct errors in documentation.
991 7. New working papers (provider interface).
|
992 karl 1.8 8. Add Providerreg.exe tool.
993 9. Add trace output for messages sent from the Server.
|
994 mike 1.26
|
995 karl 1.29 ------------------------------------------------------------------------------
996 --
|
997 mike 1.26
|
998 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
999 karl 1.5
|
1000 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
1001 find functions. Note: This symbol is defined in config.h. (ks).
1002
|
1003 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1004 of dynamic lib loaading.
|
1005 karl 1.1
1006
|
1007 karl 1.29 ------------------------------------------------------------------------------
1008 --
|
1009 mike 1.26
|
1010 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1011 karl 1.1
1012 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1013 qualifiers, methods.
1014 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1015 methods.
1016 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1017 qualifiers and to
1018 remove qualifiers.
1019 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1020 compiler. It probably imposed more limitations than would be required with
|
1021 karl 1.2 the current compiler. This version of the port produces an excessively large
1022 common module due to template bloat. That problem will be fixed in a future
1023 change to the port. Also there are a log of duplicate symbol warnings generate
1024 by the AIC compiler but these cause no problems. The port has been tested
1025 with the complete unit test and client/server test successfully.
|
1026 karl 1.1
1027 --------------------------------------------------------------------------
|
1028 karl 1.2
|
1029 mike 1.4 23 May 2001
|
1030 karl 1.1
|
1031 mike 1.9 1. Ported to HPUX
|
1032 karl 1.5
|
1033 mike 1.9 --------------------------------------------------------------------------
1034
1035 29 May 2001
1036
1037 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1038 mike 1.51
1039
1040
1041
|
1042 karl 1.48
|
1043 karl 1.38
|
1044 karl 1.30
|
1045 karl 1.29
|
1046 mike 1.10
|