1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
153
|
154 kumpf 1.71 15. (Nag Boranna - HP) 04 March 2002 - Modified CIMClient API to accept
155 username and password as parameters to connect() method, added a new
156 method diconnect() that closes the open connection with the server
157 and added code to handle HTTP Basic authentication challenges from
158 the server.
|
159 kumpf 1.68
|
160 karl 1.59 -------------------------------------------------------------------
|
161 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
162
163 1. Merged back to Main branch. All general development will be in main branch
164 in the future with releases in side branches. Special side developments
165 may temporarily be in side branches.
166 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
167 karl 1.53
168 2. (Karl) 18 December 2001 - Added new directory repositories where repository
169 implementations will be kept to separate them from the
170 repository interface defintion. Initial implementation is genericfile
171 which is the current file based repository.
172
173 Added new build variable RMREPOSITORY which is a generic MAKE command
174 to remove an existing repository. It simply substitutes for the RMDIRHIER
175 command at this point but we will make this a generic part of system
176 in the future.
|
177 karl 1.52
|
178 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
179 to check that all required parameters for intrinsic methods are
180 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
181 exception is thrown. Also added checks for duplicate parameters in the
182 intrinsic methods. If a parameter is specified more than once, a
183 CIM_ERR_INVALID_PARAMETER exception is thrown.
184
|
185 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
186 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
187 queue to this new queue. Modified CIMServer.cpp to create
188 CIMOperationRequestAuthorizer queue only when authorization is enabled.
189 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
190 it available to the CIMOperationRequestDispatcher.
191
|
192 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
193 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
194 forever. The problem was noticed when the TestClient program and CIMserver
195 service were both running. The service wasn't accessible to the TestClient
196 program.
197
|
198 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
199 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
200 in new queue, IndicationService which will get invoked from dispatcher.
201 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
202 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
203 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
204 CIM_GET_INSTANCE_REQUEST_MESSAGE
205 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
206 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
207
208 This new service will also take care of processing the indications on receiving
209 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
210 IndicationProvider or some other mechanism which is not yet clear.
211
212 IndicationService will also receive following messages from PG_ProviderRegistration
213 when a new IndicationProvider will get registered.
214 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
215 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
216
217 I had also defined new Indication Provider APIs, enableIndication, disableIndication
218 and modifyIndication with more parameters passed and eventually planning to terminate
219 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
220 plan to implement one more call as startIndication and will be done soon.
221
222 There are three new test programs in IndicationService directory, which will create
223 Filter, Indication and Subscription instances using IndicationService.
224
225 Also modified sample IndicationProvider code with the new APIs introduced.
|
226 mary 1.56
|
227 karl 1.52 -------------------------------------------------------------------------
|
228 karl 1.1
|
229 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
230 current working dev branch of build
|
231 mike 1.36
|
232 karl 1.49 ---------------------------------------------------------------------------
233 Version 1.1 - July 2001 Development branch (Work in PRogress)
234
|
235 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
236 PARAMETER.REFERENCE constructs for references).
237
238 2. (Mike Brasher) Reworked server communication into new module scheme.
|
239 mike 1.51 =======
240 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
241 seen as part of CGIclient class displays.
242
243 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
244 to the final version in Schemas\CIM25. This included minor
245 corrections, etc and a couple of file changes. This is the
246 official final CIM 25 schema relesed by the DMTF. This change
247 should not affect any current work.
248 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
249 directorys. Note however that today the make repository still
250 loads the 2.5 schema.
251
252 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
253 on XML output.
254
255 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
256 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
257 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
258 declarations in for loop initializers outside the loop, so multiple
259 "for (int i=0; i<10; i++);" statements cause a compile error.
260 mike 1.51
261 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
262 dependency on the config files at the start of the cimserver. Now the
263 cimserver will use in-memory default values in the absence of config files
264 and command line options. Fixed a few defects in the config framework that
265 were causing cimom to crash under certain conditions. Changed the config
266 provider class name to 'PG_ConfigSetting' in the mof file and modified
267 provider implementation files accordingly. Also modified the config CLI
268 to show user friendly error/status messages.
269
270 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
271 (reported incorrect line number on error in XML request if input redirected).
272 Enhanced the -d debug command line option to allow more flexibility in
273 generating debug output.
274
275 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
276 xml when it generates xml output.
277
278 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
279 a common file to reduce the number of files required by the default
280 repository implementation.
281 mike 1.51
282 10. (Mike Brasher) - Fixed minor bug in repository implementation.
283
284 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
285
286 12. (Mike Brasher) - Committed rework of server into queue approach.
287
288 13. (Mike Brasher) - New webserver and webclient examples.
289
290 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
291
292 15. (Mike Brasher) - Initial work on refactorying client into modules.
293 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
294
295 16. (Mike Brasher) - queue-based clients now complete.
296
297 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
298
299 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
300
301 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
302 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
303 a web server. See doc/Servlet for more information.
304
305 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
306 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
307 input and output can be written in a trace file.
308
309 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
310 Created new class SignalHandler that allow registration, activation and
311 deactivation of signal handler functions (Linux only !).
312
313 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
314 ExportClient to support ExportIndication. DisplayConsumer, a sample
315 consumer is added which will consume (by displaying on screen) the
316 indication exported by CIMExportRequestDispatcher. This complete
317 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
318 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
319 are modified to implement above messages.
320
321 XmlIndicationDispatcher test program is modified to test complete
322 operation. It now creates a consumer, handler and indication
323 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
324 indication to consumer. This program needs
325 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
326 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
327 in the repository to complete the test successfully. This test
328 program also needs Handler qualifier defined in repository and
329 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
330 below:
331
332 //====================================================================
333 // CIM_IndicationHandlerXMLHTTP
334 //====================================================================
335 [Description (
336 "CIM_IndicationHandlerXMLHTTP describes the destination for "
337 "Indications to be delivered via HTTP, using a cimXML "
338 "representation."), Handler ("CIMxmlIndicationHandler") ]
339
340 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
341 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
342 a provider library.
343
344 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
345 interface for the provider. InvokeMethod currently uses CIMValue as
346 type for inParameters and outParameters, which are unable to give
347 information about param name, type and value. This should be changed
348 to CIMParamValue which will help providers to know details of the
349 parameter name and type along with value passed through InvoleMethod
350 call. Current implementation uses CIMParamValue as parameters while
351 travelling through message queues and converts it back to array of
352 CIMValue before calling Provider API (which needs to be changed
353 later).
354
355 Also added are two test programs:
356
357 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
358 CIMParamValue class.
359
360 src/Pegasus/Client/tests/InvokeMethod - which makes call to
361 InvokeMethod and displays the return value. Current
362 implementation assumes that provider had returned true value
363 and outParameters (which are now hard coded in
364 CIMOperationRequestDispatcher to implement functionality)
365 mike 1.51 which are passed as response of InvokeMethod to client.
366
367 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
368 authentication to the pegasus code. Created an Authentication Manager
369 and authenticator interfaces. The file based local authentication
370 module has been modified to implement the local authenticator
371 interface, to generate the challenge for the unauthorized requests
372 and to verify the authentication.
373
374 A skeleton program has been created for the Basic Authenticator.
375 This code is in the Security/Authentication directory which is not
376 yet linked into the build.
377
378 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
379 Decoders. Earlier decoders were sending requests and responses
380 before finishing complete Xml parse. This was prone to send
381 request/response even the Xml is wrong after the MethodCall.
382 New changes collects the Message* as return value from the
383 appropriate functions while parsing the Xml and sends on
384 _outputQueue only when Xml is parsed successfully.
385
386 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
387 fix the problem with constructing provider name and loading the
388 providers for unix platforms. Also moved the shared library name
389 construction (appending .sl or .so) from
390 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
391 ProviderModule.cpp and included it in a method that returns
392 provider file path name.
393
394 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
395 Handler. This handler extracts MappingStrings qualifier from class
396 definition and converts it into SNMP specific trap data. The trap
397 structure is defined in a abstract class in snmpDeliverTrap.h file.
398 Every one has his or her own SNMP agent, which will talk with master
399 agent to deliver the trap or may have some other mechanism.
400 Extending snmpDeliverTrap class and deliverTrap method will help to
401 implement specific trap delivery mechanism.
402
403 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
404 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
405 property value to be default in the plan file, remove the property from the
406 plan file. Converted ConfigSettingProvider to use provider2 library.
407 mike 1.51
408 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
409 to allow tracing of a specific number of bytes in a given
410 string. Also modified the XmlIO trace code to use the new interface.
411 Changed the config file defaults for tracing.
412
413 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
414 NonStop platform (NSK) in directory pegasus/mak. The following files
415 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
416 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
417 program-unix.mak. The original program.mak which previously covered
418 all platforms was split into platform-specific make files, and now
419 only contains conditionals. Files config.mak, objects.mak, and
420 library.mak were changed to include the NSK files.
421 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
422
423 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
424 commas (,) in the string values of key properties.
425
426 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
427
428 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
429 pegasus/mak/program-windows.mak that prevented program builds for
430 the windows platform (related to change from 28 Oct). Replaced
431 leading whitespace in front of commands with tabs as required
432 in make files.
433
434 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
435 because getting an error in 26
436
437 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
438 whose types are references. These reference values must be
439 treated specially in the XML encoding, using the VALUE.REFERENCE
440 tag structure.
441
442 Pegasus had been passing reference values simply as String values.
443 For example, EnumerateInstanceNames returned KEYVALUEs of string
444 type rather than VALUE.REFERENCEs.
445
446 I've modified the XmlReader::getKeyBindingElement() and
447 CIMReference::instanceNameToXml() methods to read and write the
448 XML in the proper format. However, making that change required
449 mike 1.51 that a CIMReference object be able to distinguish between a key
450 of String type and a key of reference type.
451
452 I've modified the String format of CIMReferences slightly to
453 allow efficient processing of references whose keys are also of
454 reference type. The "official" form uses the same encoding for
455 key values of String type and of reference type, and so it
456 would be necessary to retrieve the class definition and look up
457 the types of the key properties to determine how to treat the
458 key values. This is clearly too inefficient for internal
459 transformations between CIMReferences and String values.
460
461 The workaround is to encode a 'R' at the beginning of the value
462 for a key of reference type (before the opening '"'). This allows
463 the parser to know a priori whether the key is of String or
464 reference type.
465
466 In this example:
467
468 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
469
470 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
471 the usual encoding. Key2 is a reference property, so the extra 'R'
472 is inserted before its encoded value. Note that this algorithm is
473 recursive, such that RefClass could include KeyC of reference type,
474 which would also get encoded with the 'R' notation.
475
476 The toString() method inserts the 'R' to provide symmetry. A new
477 KeyBinding type (REFERENCE) has been defined to denote keys in a
478 CIMReference that are of reference type. This KeyBinding type must
479 be used appropriately for CIMReference::ttoString() to behave
480 correctly.
481
482 The files that have been modified to make this change are
483 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
484
485 A result of this change is that instances names in the instance
486 repository will include this extra 'R' character. Thus, you will
487 need to repopulate your repository when you download the latest
488 CIMOM version.
489
490 Note that for user-facing uses of the String encoding of instance
491 mike 1.51 names (such as might appear in MOF for static association
492 instances or in the CGI client), this solution is non-standard and
493 therefore unacceptable. It is likely that these points will need
494 to process the more expensive operation of retrieving the class
495 definition to determine the key property types.
496
497 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
498 in case of error in setting trace components. Modified the property owner
499 init and update methods. Submitted the pegasus/mak/Buildmakefile with
500 cleanbuild, rebuild and trace configuration options.
501
502 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
503 (instanceName).
504
505 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
506 GetProperty/SetProperty/EnumerateInstances request/response messages.
507 Added encoding and decoding of PropertyList parameters on all
508 relevant intrinsic methods.
509
510 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
511 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
512 mike 1.51
513 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
514 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
515 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
516 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
517 SystemNsk.cpp) contain stubs. The associated control files
518 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
519 nsk platform links.
520
521 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
522 toString() method for CIMValues of String type. The old behavior
523 returned an XML encoding of the String with special characters
524 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
525 would be returned as a"b. The new behavior just returns the
526 String value directly with no translation. (Note that
527 CIMValue.toXml() may still be used to get the XML-encoded value.)
528
529 This change was necessary in part to correct the behavior of the
530 repository. CreateInstance stores the instance name returned by
531 CIMInstance.getInstanceName(), which is built using calls to
532 CIMValue.toString(). GetInstance searches for the instance name
533 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
534 be successful, CreateInstance must have stored the instance name
535 in that same form, without special character encoding.
536
537 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
538 the CIMValue class. Eliminated improper use of CIMValue.toString(),
539 often replacing with CIMValue.get(String&) or CIMValue.toXml().
540 Also added some error handling in the indication handlers.
541
542 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
543 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
544 to handle local instance path and local classpath. Modified the
545 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
546 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
547
548 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
549 to hold the argument to ModifyInstance and the return values
550 from EnumerateInstances. The client and provider APIs need to
551 be updated to use this class.
552
553 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
554 mike 1.51 source files. This CLI allows addition, modification, removal and listing
555 of CIM users. The CLI is not linked to the main makefile as the Provider
556 functionality is yet to be implemented. Added the function
557 String getPassword(char* prompt) to the System.h and cpp files.
558
559 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
560 the server to challenge the unauthorized requests, authenticate
561 the challenge responses, and verify the subsequent authorized requests.
562 Implemented authentication mechanism on the Client api to send
563 responses to the challenges from the server. Current implementation
564 supports only 'local' authentication mechanism.
565
566 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
567
568 - Changed the return value of EnumerateInstances from Array<CIMInstance>
569 to Array<CIMNamedInstance>
570 - Changed the parameter to ModifyInstance from CIMInstance to
571 CIMNamedInstance
572 - Added an optional PropertyList parameter to ModifyInstance
573 - Changed all handling of PropertyList parameters to use the
574 CIMPropertyList class instead of Array<String>
575 mike 1.51
576 Each of these changes was required to comply with the DMTF specification.
577
578 These changes were made throughout the system except for in the provider
579 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
580 differences from providers, so older providers will continue to function.
581 However, this means that clients can not yet take advantage of the added
582 functionality.
583
584 When the provider API is updated, the following changes will be visible:
585
586 - Providers will get a PropertyList parameter to ModifyInstance which
587 they are required to respect. Providers that can not process the
588 PropertyList must throw a NOT_SUPPORTED exception whenever the
589 list is not null. Clients can take advantage of this change by
590 issuing a ModifyInstance request against a selected set of
591 properties in an instance, rather than being required to replace
592 the entire instance.
593
594 - Providers will be required to return instance names along with
595 instances in the EnumerateInstances method. Clients will receive
596 mike 1.51 these instance names, as the standard dictates.
597
598 - Providers will receive a CIMPropertyList argument containing the
599 PropertyList instead of an Array<String>. This change allows
600 providers to distinguish between an empty list and a null list.
601
602 Note that the repository also does not yet handle the PropertyList in
603 ModifyInstance correctly.
604
605 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
606 provider API to match the changes made to the EnumerateInstances and
607 ModifyInstance operations. These changes were made to comply with
608 the DMTF specification.
609
610 The original Provider API has not been updated, and I have no
611 plans to do so. Providers written to the original API will
612 continue to function, but they will not have the opportunity
613 to take advantage of the features that have been added.
614
615 The significant changes to the Provider2 API are:
616
617 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
618 they are required to respect. Providers that can not process the
619 PropertyList must throw a NOT_SUPPORTED exception whenever the
620 list is not null. Clients can take advantage of this change by
621 issuing a ModifyInstance request against a selected set of
622 properties in an instance, rather than being required to replace
623 the entire instance.
624
625 - Providers will get an IncludeQualifiers parameter to ModifyInstance
626 which they are required to respect. If IncludeQualifiers is
627 false, the qualifiers on the modified instance provided must not
628 be used to update the instance.
629
630 - Providers will be required to return instance names along with
631 instances in the EnumerateInstances method. Clients will receive
632 these instance names, as the standard dictates.
633
634 The providers that are in the Pegasus build have all been updated.
635 However, whenever the PropertyList is not null, the providers throw
636 a NOT_SUPPORTED exception.
637
638 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
639 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
640 the Common module. File Config.h was modified to include the NSK
641 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
642 without the standard (std) namespace.
643
644 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
645 properties to support alternate behavior of the Pegasus repository:
646 repositoryIsDefaultInstanceProvider and repositoryProviderName.
647
648 Using the first one, the repository can be enabled/disabled as the
649 default provider for instance (and association) operations. The default
650 setting is "true", so the default behavior has not been changed. To
651 disable the repository as the default instance provider, issue the
652 following command before starting cimserver:
653
654 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
655
656 The repositoryProviderName configuration property specifies what
657 provider name is used to explicitly register the repository as a
658 provider. This is necessary when the repository needs to serve
659 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
660 to "false". The default value is "repository". To register the
661 repository as an instance provider for a class, add a
662 'Provider("repository")' qualifier to the class definition.
663
664 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
665 pass to providers that act as services. This handle provides
666 service providers with access to the CIMServer data structures.
667
668 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
669 the repository so that it respects the IncludeQualifiers and
670 PropertyList parameters. Updated SetProperty in the repository
671 so that it uses ModifyInstance correctly. The repository now
672 supports GetProperty and SetProperty in addition to ModifyInstance.
673
674 Implemented GetProperty and SetProperty in the Dispatcher and
675 Provider2 so that they get translated to GetInstance and
676 ModifyInstance calls (respectively) in the provider. Providers
677 written to the Provider2 API that correctly process the new
678 ModifyInstance parameters will automatically support SetProperty
679 operations. Note that GetProperty and SetProperty currently only
680 mike 1.51 work for String properties because of an XML encoding limitation.
681
682 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
683 Security components for authentication and authorization.
684
685 Authentication and User Management:
686 cimuser CLI : This CLI is used for addition, modification, removal
687 and listing of CIM Users. The CIM user password is encrypted and stored
688 in a file. The password file format is compatible with Apache's htpasswd
689 generated password file.
690
691 cimauth CLI implement the authorization managment functionality by letting
692 to add/remove/list user authorizations.
693
694 User Manager and User Manager Provider components implement the user
695 management and authorization functionality.
696
697 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
698 under src/Pegasus/WQL which contains library and BNF.
699
700 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
701 mike 1.51 which does provider registration, block, unblock, and stop a provider.
702 It also alert Subscription Service of any provider registration changes.
703
704 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
705 and String.cpp with PEG_min. The _min macro caused problems on the
706 NSK platform because of a duplicate definition in a standard file.
707
708 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
709 subscription service provider that serves as the instance provider for the
710 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
711 classes (from CIM_Events27.mof). The service also takes appropriate action
712 in response to startup, shutdown of the cimom, termination of a provider,
713 or change in provider registration.
714
715 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
716 and the command line interface for shutting down cimom gracefully.
717 For more information, refer to the CIMOM Shutdown working paper
718 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
719
720 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
721 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
722 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
723 constructor to set a pointer to the server-, resp. client wide SSL_Context
724 structure. The Socket field in HTTPConnection is substituted with an
725 MP_Socket pointer, a class that is designed to hide the differences
726 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
727 is defined even in a non-ssl environment.
728 How to use it in a Server or Client:
729 1. Just create an SSL_Context once per Server/Client address space
730 2. Construct every HTTPConnector/Acceptor with a pointer to this
731 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
732 without SSL_Context for conventional connections.
|
733 mike 1.50
|
734 mike 1.51 The Configuration data was extended with the boolean SSL property, and
735 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
736
737 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
738 kumpf 1.61
|
739 mike 1.51 ---------------------------------------------------------------------------
740 Version 1.1 - July 2001 Development branch
741 Tagged as version_1_01 on 3 August 2001 (sorry should have been
742 1.1
743
744 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
745 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
746 and ExportClient classes. the indication.
747
748 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
749 make the delivery of indications over Xml-HTTP and email respectively.
750
751 Provided examples for HandlerTable, XmlIndicationDelivery and
752 SendMailIndicationDelivery to support this implementation.
753
754 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
755 library and a thread-safe message queue (first stage). Classes defined
756 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
757 and SimpleThread.
758
759 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
760 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
761 information on using wbemexec. A simple test script is included. Please
762 see pegasus/src/Clients/wbemexec/tests/readme for information on running
763 the test script.
764
765 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
766 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
767 and
768 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
769 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
770 src/Pegasus/Common/TraceFileHandler.cpp.
771
772 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
773 Config CLI. Please refer to the documentation
774 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
775 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
776 using the config framework and cimconfig CLI. Make sure to load the config
777 mof (src/gmake config) before starting the cimserver. A simple test script
778 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
779 information on running the test script.
780
781 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
782 (changed the H and CPP files for the major CIM objects. These
783 functions generate CIM MOF output for the objects.
784
785 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
786 Authentication provides security mechanism to authenticates CIM clients
787 that
788 connect to CIM Server on the same system without having to specify a
789 password.
790 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
791 This component only works on unix and it's not linked in with the main
792 build.
793 When authentication framework is defined this component may need to be
794 modified to integrate with the framework.
|
795 karl 1.49
796 ---------------------------------------------------------------------------
797 Version 0.99.x (Fixes to version 0.99) in Process
|
798 mike 1.51
|
799 karl 1.49 NOTE: Please do not input anything to this branch except for critical
800 fixes. This is, in effect, 1.0 and we do not want to use it for
801 development.
802
803 ----------------------------------------------------------------------------
804
805 Version 0.98.0 - Work in progress (This number skipped)
|
806 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
807 mike 1.36
|
808 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
809 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
810
|
811 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
812 in the HTML URL reference for passing instance names.
813
|
814 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
815
816 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
817
|
818 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
819 allow slp to compile.
820
|
821 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
822
823 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
824 ids to queue pointers).
825
|
826 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
827 and Dispatcher.
828
|
829 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
830 and
831 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
832 chip 1.44 ResponseHandler for Provider2 interface.
|
833 mike 1.45
834 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
835
836 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
837
|
838 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
839
|
840 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
841
842 12. (Mike Brasher) - Fixed compiler error on Linux.
843
|
844 karl 1.38 ------------------------------------------------------------------------------
845 --
|
846 mike 1.26
|
847 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
848 karl 1.16
849 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
850 for NT and Linux platforms.
|
851 mike 1.26
|
852 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
853 5988.
854 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
855 the DMTF.
|
856 mike 1.26
|
857 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
858 Fusion event. THis included a) extended the test for end of HTTP header from
859 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
860 Extended the HTTP message ID to allow for non-numeric message IDs.
|
861 mike 1.26
|
862 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
863 and created RepositoryDeclContext.{cpp,h}. This is the first step in
864 revamping the compiler to work independently of the repository (grb).
|
865 mike 1.26
|
866 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
867 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
868 Now when you build normally, you will get the committed grammar and parser
869 files instead of generating your own for a particular platform. This should
870 prevent back-level lex and yacc implementations from generating troublesome
871 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
872 bob 1.20 (grb)
|
873 mike 1.26
|
874 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
875 This change paves the way for upcoming changes that will allow the compiler
876 to work indepently of the repository. (grb)
|
877 mike 1.26
|
878 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
879 mike 1.26
|
880 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
881 modifyClass,
|
882 chip 1.22 createClass to protect caller's object.
|
883 mike 1.26
|
884 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
885 directory. These
886 interfaces allow very smart providers to perform advances operations.
887 CIMProviderStub has
|
888 chip 1.23 been updated to support the new interfaces. Needs testing.
|
889 mike 1.26
|
890 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
891 mike 1.26
|
892 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
893 repository you make world, make rebuild or make repository. ks
|
894 mike 1.26
895 12. Added associators() and associatorNames() operations to CIM repository.
|
896 mike 1.27 (MEB)
897
898 13. More on association implementation (all four operations supported).
899 Need to handle deletion of associations and protocol stubs still.
900 Need to test class associations (rather than just instance associations).
901 Need to handle deleteInstance().
902 (MEB)
|
903 mike 1.26
|
904 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
905
|
906 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
907 AssociationName
|
908 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
909 pages.
910
|
911 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
912 sage 1.31
913 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
914 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
915 Made cimserver accept the -D flag to eliminate the need for environment
916 variables.
|
917 mike 1.32
918 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
919 References() and ReferenceNames() CIM operations. These only operate
920 on instances at this time. They will operate on classes soon.
|
921 kumpf 1.34
922 19. (Mike Glantz) Extended and modified dynamic support
923 changes to (1) work on HP-UX and (2) have all images and libraries
924 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
925 change is to program.mak and library-unix.mak, removing specific
926 lists of dynamic library specs and putting them in the Makefile
927 and libraries.mak files that build the actual targets (lots of
928 these now have DYNAMIC_LIBRARIES defined).
|
929 karl 1.35
930 20. (Karl) added basic Queue function to common (based on array) and added
931 tests for stack and queue.
|
932 karl 1.38
933 ------------------------------------------------------------------------------
934 --
|
935 mike 1.36
|
936 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
937 karl 1.11
|
938 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
939 CIMServer (both)
|
940 karl 1.11 Functions added include:
941 a. Enable trace to log file.
|
942 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
943 is
|
944 karl 1.11 trace to log, -t is trace to console).
945 c. add parameter in optionsrow for help message and enable the capture
|
946 karl 1.12 of these messages in Options class. Also added help print that
947 prints these things out. However, format not to beautiful.
|
948 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
949 e. Extend the Clients\testclient so he does tests on Namespace.
|
950 karl 1.15 2. (KS)Extended Log to show time, severity.
|
951 mike 1.33
|
952 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
953 mike 1.33
|
954 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
955 logs
|
956 karl 1.12 are put
|
957 mike 1.33
|
958 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
959 This is a preliminary version.
|
960 mike 1.33
|
961 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
962 karl 1.13 throws CannotBind exception.
|
963 mike 1.33
|
964 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
965 not
|
966 karl 1.14 print out all of the message. At the least it prints out the error message
967 and components of the message causing the problem.
|
968 mike 1.33
|
969 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
970 mike 1.33
|
971 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
972 karl 1.14 existed.
|
973 mike 1.33
974 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
975 karl 1.15
|
976 karl 1.29 ------------------------------------------------------------------------------
977 --
|
978 karl 1.6 Version 0.97.2
979
980 1. Extend HP UX port to correctly load Dynamic Load Libraries.
981 2. Extend Formatter for Boolean and Uint32 types.
982 3. Change CIM Server to use Trace (-t) flag. This also changed
983 Handler.h to work off of flag.
984 4. Minor corrections to __Namespace Provider.
985 5. Extend tests for Formatter, String, and other modules.
986 6. Correct errors in documentation.
987 7. New working papers (provider interface).
|
988 karl 1.8 8. Add Providerreg.exe tool.
989 9. Add trace output for messages sent from the Server.
|
990 mike 1.26
|
991 karl 1.29 ------------------------------------------------------------------------------
992 --
|
993 mike 1.26
|
994 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
995 karl 1.5
|
996 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
997 find functions. Note: This symbol is defined in config.h. (ks).
998
|
999 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
1000 of dynamic lib loaading.
|
1001 karl 1.1
1002
|
1003 karl 1.29 ------------------------------------------------------------------------------
1004 --
|
1005 mike 1.26
|
1006 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1007 karl 1.1
1008 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1009 qualifiers, methods.
1010 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1011 methods.
1012 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1013 qualifiers and to
1014 remove qualifiers.
1015 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1016 compiler. It probably imposed more limitations than would be required with
|
1017 karl 1.2 the current compiler. This version of the port produces an excessively large
1018 common module due to template bloat. That problem will be fixed in a future
1019 change to the port. Also there are a log of duplicate symbol warnings generate
1020 by the AIC compiler but these cause no problems. The port has been tested
1021 with the complete unit test and client/server test successfully.
|
1022 karl 1.1
1023 --------------------------------------------------------------------------
|
1024 karl 1.2
|
1025 mike 1.4 23 May 2001
|
1026 karl 1.1
|
1027 mike 1.9 1. Ported to HPUX
|
1028 karl 1.5
|
1029 mike 1.9 --------------------------------------------------------------------------
1030
1031 29 May 2001
1032
1033 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1034 mike 1.51
1035
1036
1037
|
1038 karl 1.48
|
1039 karl 1.38
|
1040 karl 1.30
|
1041 karl 1.29
|
1042 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc