1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 karl 1.70
151 14. (KS) 4 March 2002 - Corrections for NULL value and the XML code.
152 Corrections to compiler for Null values input (parser and valuectory)
153
|
154 kumpf 1.68
|
155 karl 1.59 -------------------------------------------------------------------
|
156 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
157
158 1. Merged back to Main branch. All general development will be in main branch
159 in the future with releases in side branches. Special side developments
160 may temporarily be in side branches.
161 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
162 karl 1.53
163 2. (Karl) 18 December 2001 - Added new directory repositories where repository
164 implementations will be kept to separate them from the
165 repository interface defintion. Initial implementation is genericfile
166 which is the current file based repository.
167
168 Added new build variable RMREPOSITORY which is a generic MAKE command
169 to remove an existing repository. It simply substitutes for the RMDIRHIER
170 command at this point but we will make this a generic part of system
171 in the future.
|
172 karl 1.52
|
173 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
174 to check that all required parameters for intrinsic methods are
175 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
176 exception is thrown. Also added checks for duplicate parameters in the
177 intrinsic methods. If a parameter is specified more than once, a
178 CIM_ERR_INVALID_PARAMETER exception is thrown.
179
|
180 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
181 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
182 queue to this new queue. Modified CIMServer.cpp to create
183 CIMOperationRequestAuthorizer queue only when authorization is enabled.
184 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
185 it available to the CIMOperationRequestDispatcher.
186
|
187 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
188 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
189 forever. The problem was noticed when the TestClient program and CIMserver
190 service were both running. The service wasn't accessible to the TestClient
191 program.
192
|
193 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
194 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
195 in new queue, IndicationService which will get invoked from dispatcher.
196 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
197 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
198 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
199 CIM_GET_INSTANCE_REQUEST_MESSAGE
200 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
201 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
202
203 This new service will also take care of processing the indications on receiving
204 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
205 IndicationProvider or some other mechanism which is not yet clear.
206
207 IndicationService will also receive following messages from PG_ProviderRegistration
208 when a new IndicationProvider will get registered.
209 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
210 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
211
212 I had also defined new Indication Provider APIs, enableIndication, disableIndication
213 and modifyIndication with more parameters passed and eventually planning to terminate
214 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
215 plan to implement one more call as startIndication and will be done soon.
216
217 There are three new test programs in IndicationService directory, which will create
218 Filter, Indication and Subscription instances using IndicationService.
219
220 Also modified sample IndicationProvider code with the new APIs introduced.
|
221 mary 1.56
|
222 karl 1.52 -------------------------------------------------------------------------
|
223 karl 1.1
|
224 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
225 current working dev branch of build
|
226 mike 1.36
|
227 karl 1.49 ---------------------------------------------------------------------------
228 Version 1.1 - July 2001 Development branch (Work in PRogress)
229
|
230 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
231 PARAMETER.REFERENCE constructs for references).
232
233 2. (Mike Brasher) Reworked server communication into new module scheme.
|
234 mike 1.51 =======
235 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
236 seen as part of CGIclient class displays.
237
238 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
239 to the final version in Schemas\CIM25. This included minor
240 corrections, etc and a couple of file changes. This is the
241 official final CIM 25 schema relesed by the DMTF. This change
242 should not affect any current work.
243 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
244 directorys. Note however that today the make repository still
245 loads the 2.5 schema.
246
247 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
248 on XML output.
249
250 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
251 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
252 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
253 declarations in for loop initializers outside the loop, so multiple
254 "for (int i=0; i<10; i++);" statements cause a compile error.
255 mike 1.51
256 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
257 dependency on the config files at the start of the cimserver. Now the
258 cimserver will use in-memory default values in the absence of config files
259 and command line options. Fixed a few defects in the config framework that
260 were causing cimom to crash under certain conditions. Changed the config
261 provider class name to 'PG_ConfigSetting' in the mof file and modified
262 provider implementation files accordingly. Also modified the config CLI
263 to show user friendly error/status messages.
264
265 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
266 (reported incorrect line number on error in XML request if input redirected).
267 Enhanced the -d debug command line option to allow more flexibility in
268 generating debug output.
269
270 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
271 xml when it generates xml output.
272
273 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
274 a common file to reduce the number of files required by the default
275 repository implementation.
276 mike 1.51
277 10. (Mike Brasher) - Fixed minor bug in repository implementation.
278
279 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
280
281 12. (Mike Brasher) - Committed rework of server into queue approach.
282
283 13. (Mike Brasher) - New webserver and webclient examples.
284
285 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
286
287 15. (Mike Brasher) - Initial work on refactorying client into modules.
288 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
289
290 16. (Mike Brasher) - queue-based clients now complete.
291
292 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
293
294 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
295
296 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
297 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
298 a web server. See doc/Servlet for more information.
299
300 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
301 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
302 input and output can be written in a trace file.
303
304 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
305 Created new class SignalHandler that allow registration, activation and
306 deactivation of signal handler functions (Linux only !).
307
308 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
309 ExportClient to support ExportIndication. DisplayConsumer, a sample
310 consumer is added which will consume (by displaying on screen) the
311 indication exported by CIMExportRequestDispatcher. This complete
312 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
313 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
314 are modified to implement above messages.
315
316 XmlIndicationDispatcher test program is modified to test complete
317 operation. It now creates a consumer, handler and indication
318 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
319 indication to consumer. This program needs
320 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
321 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
322 in the repository to complete the test successfully. This test
323 program also needs Handler qualifier defined in repository and
324 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
325 below:
326
327 //====================================================================
328 // CIM_IndicationHandlerXMLHTTP
329 //====================================================================
330 [Description (
331 "CIM_IndicationHandlerXMLHTTP describes the destination for "
332 "Indications to be delivered via HTTP, using a cimXML "
333 "representation."), Handler ("CIMxmlIndicationHandler") ]
334
335 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
336 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
337 a provider library.
338
339 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
340 interface for the provider. InvokeMethod currently uses CIMValue as
341 type for inParameters and outParameters, which are unable to give
342 information about param name, type and value. This should be changed
343 to CIMParamValue which will help providers to know details of the
344 parameter name and type along with value passed through InvoleMethod
345 call. Current implementation uses CIMParamValue as parameters while
346 travelling through message queues and converts it back to array of
347 CIMValue before calling Provider API (which needs to be changed
348 later).
349
350 Also added are two test programs:
351
352 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
353 CIMParamValue class.
354
355 src/Pegasus/Client/tests/InvokeMethod - which makes call to
356 InvokeMethod and displays the return value. Current
357 implementation assumes that provider had returned true value
358 and outParameters (which are now hard coded in
359 CIMOperationRequestDispatcher to implement functionality)
360 mike 1.51 which are passed as response of InvokeMethod to client.
361
362 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
363 authentication to the pegasus code. Created an Authentication Manager
364 and authenticator interfaces. The file based local authentication
365 module has been modified to implement the local authenticator
366 interface, to generate the challenge for the unauthorized requests
367 and to verify the authentication.
368
369 A skeleton program has been created for the Basic Authenticator.
370 This code is in the Security/Authentication directory which is not
371 yet linked into the build.
372
373 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
374 Decoders. Earlier decoders were sending requests and responses
375 before finishing complete Xml parse. This was prone to send
376 request/response even the Xml is wrong after the MethodCall.
377 New changes collects the Message* as return value from the
378 appropriate functions while parsing the Xml and sends on
379 _outputQueue only when Xml is parsed successfully.
380
381 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
382 fix the problem with constructing provider name and loading the
383 providers for unix platforms. Also moved the shared library name
384 construction (appending .sl or .so) from
385 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
386 ProviderModule.cpp and included it in a method that returns
387 provider file path name.
388
389 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
390 Handler. This handler extracts MappingStrings qualifier from class
391 definition and converts it into SNMP specific trap data. The trap
392 structure is defined in a abstract class in snmpDeliverTrap.h file.
393 Every one has his or her own SNMP agent, which will talk with master
394 agent to deliver the trap or may have some other mechanism.
395 Extending snmpDeliverTrap class and deliverTrap method will help to
396 implement specific trap delivery mechanism.
397
398 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
399 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
400 property value to be default in the plan file, remove the property from the
401 plan file. Converted ConfigSettingProvider to use provider2 library.
402 mike 1.51
403 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
404 to allow tracing of a specific number of bytes in a given
405 string. Also modified the XmlIO trace code to use the new interface.
406 Changed the config file defaults for tracing.
407
408 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
409 NonStop platform (NSK) in directory pegasus/mak. The following files
410 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
411 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
412 program-unix.mak. The original program.mak which previously covered
413 all platforms was split into platform-specific make files, and now
414 only contains conditionals. Files config.mak, objects.mak, and
415 library.mak were changed to include the NSK files.
416 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
417
418 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
419 commas (,) in the string values of key properties.
420
421 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
422
423 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
424 pegasus/mak/program-windows.mak that prevented program builds for
425 the windows platform (related to change from 28 Oct). Replaced
426 leading whitespace in front of commands with tabs as required
427 in make files.
428
429 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
430 because getting an error in 26
431
432 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
433 whose types are references. These reference values must be
434 treated specially in the XML encoding, using the VALUE.REFERENCE
435 tag structure.
436
437 Pegasus had been passing reference values simply as String values.
438 For example, EnumerateInstanceNames returned KEYVALUEs of string
439 type rather than VALUE.REFERENCEs.
440
441 I've modified the XmlReader::getKeyBindingElement() and
442 CIMReference::instanceNameToXml() methods to read and write the
443 XML in the proper format. However, making that change required
444 mike 1.51 that a CIMReference object be able to distinguish between a key
445 of String type and a key of reference type.
446
447 I've modified the String format of CIMReferences slightly to
448 allow efficient processing of references whose keys are also of
449 reference type. The "official" form uses the same encoding for
450 key values of String type and of reference type, and so it
451 would be necessary to retrieve the class definition and look up
452 the types of the key properties to determine how to treat the
453 key values. This is clearly too inefficient for internal
454 transformations between CIMReferences and String values.
455
456 The workaround is to encode a 'R' at the beginning of the value
457 for a key of reference type (before the opening '"'). This allows
458 the parser to know a priori whether the key is of String or
459 reference type.
460
461 In this example:
462
463 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
464
465 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
466 the usual encoding. Key2 is a reference property, so the extra 'R'
467 is inserted before its encoded value. Note that this algorithm is
468 recursive, such that RefClass could include KeyC of reference type,
469 which would also get encoded with the 'R' notation.
470
471 The toString() method inserts the 'R' to provide symmetry. A new
472 KeyBinding type (REFERENCE) has been defined to denote keys in a
473 CIMReference that are of reference type. This KeyBinding type must
474 be used appropriately for CIMReference::ttoString() to behave
475 correctly.
476
477 The files that have been modified to make this change are
478 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
479
480 A result of this change is that instances names in the instance
481 repository will include this extra 'R' character. Thus, you will
482 need to repopulate your repository when you download the latest
483 CIMOM version.
484
485 Note that for user-facing uses of the String encoding of instance
486 mike 1.51 names (such as might appear in MOF for static association
487 instances or in the CGI client), this solution is non-standard and
488 therefore unacceptable. It is likely that these points will need
489 to process the more expensive operation of retrieving the class
490 definition to determine the key property types.
491
492 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
493 in case of error in setting trace components. Modified the property owner
494 init and update methods. Submitted the pegasus/mak/Buildmakefile with
495 cleanbuild, rebuild and trace configuration options.
496
497 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
498 (instanceName).
499
500 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
501 GetProperty/SetProperty/EnumerateInstances request/response messages.
502 Added encoding and decoding of PropertyList parameters on all
503 relevant intrinsic methods.
504
505 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
506 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
507 mike 1.51
508 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
509 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
510 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
511 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
512 SystemNsk.cpp) contain stubs. The associated control files
513 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
514 nsk platform links.
515
516 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
517 toString() method for CIMValues of String type. The old behavior
518 returned an XML encoding of the String with special characters
519 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
520 would be returned as a"b. The new behavior just returns the
521 String value directly with no translation. (Note that
522 CIMValue.toXml() may still be used to get the XML-encoded value.)
523
524 This change was necessary in part to correct the behavior of the
525 repository. CreateInstance stores the instance name returned by
526 CIMInstance.getInstanceName(), which is built using calls to
527 CIMValue.toString(). GetInstance searches for the instance name
528 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
529 be successful, CreateInstance must have stored the instance name
530 in that same form, without special character encoding.
531
532 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
533 the CIMValue class. Eliminated improper use of CIMValue.toString(),
534 often replacing with CIMValue.get(String&) or CIMValue.toXml().
535 Also added some error handling in the indication handlers.
536
537 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
538 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
539 to handle local instance path and local classpath. Modified the
540 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
541 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
542
543 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
544 to hold the argument to ModifyInstance and the return values
545 from EnumerateInstances. The client and provider APIs need to
546 be updated to use this class.
547
548 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
549 mike 1.51 source files. This CLI allows addition, modification, removal and listing
550 of CIM users. The CLI is not linked to the main makefile as the Provider
551 functionality is yet to be implemented. Added the function
552 String getPassword(char* prompt) to the System.h and cpp files.
553
554 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
555 the server to challenge the unauthorized requests, authenticate
556 the challenge responses, and verify the subsequent authorized requests.
557 Implemented authentication mechanism on the Client api to send
558 responses to the challenges from the server. Current implementation
559 supports only 'local' authentication mechanism.
560
561 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
562
563 - Changed the return value of EnumerateInstances from Array<CIMInstance>
564 to Array<CIMNamedInstance>
565 - Changed the parameter to ModifyInstance from CIMInstance to
566 CIMNamedInstance
567 - Added an optional PropertyList parameter to ModifyInstance
568 - Changed all handling of PropertyList parameters to use the
569 CIMPropertyList class instead of Array<String>
570 mike 1.51
571 Each of these changes was required to comply with the DMTF specification.
572
573 These changes were made throughout the system except for in the provider
574 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
575 differences from providers, so older providers will continue to function.
576 However, this means that clients can not yet take advantage of the added
577 functionality.
578
579 When the provider API is updated, the following changes will be visible:
580
581 - Providers will get a PropertyList parameter to ModifyInstance which
582 they are required to respect. Providers that can not process the
583 PropertyList must throw a NOT_SUPPORTED exception whenever the
584 list is not null. Clients can take advantage of this change by
585 issuing a ModifyInstance request against a selected set of
586 properties in an instance, rather than being required to replace
587 the entire instance.
588
589 - Providers will be required to return instance names along with
590 instances in the EnumerateInstances method. Clients will receive
591 mike 1.51 these instance names, as the standard dictates.
592
593 - Providers will receive a CIMPropertyList argument containing the
594 PropertyList instead of an Array<String>. This change allows
595 providers to distinguish between an empty list and a null list.
596
597 Note that the repository also does not yet handle the PropertyList in
598 ModifyInstance correctly.
599
600 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
601 provider API to match the changes made to the EnumerateInstances and
602 ModifyInstance operations. These changes were made to comply with
603 the DMTF specification.
604
605 The original Provider API has not been updated, and I have no
606 plans to do so. Providers written to the original API will
607 continue to function, but they will not have the opportunity
608 to take advantage of the features that have been added.
609
610 The significant changes to the Provider2 API are:
611
612 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
613 they are required to respect. Providers that can not process the
614 PropertyList must throw a NOT_SUPPORTED exception whenever the
615 list is not null. Clients can take advantage of this change by
616 issuing a ModifyInstance request against a selected set of
617 properties in an instance, rather than being required to replace
618 the entire instance.
619
620 - Providers will get an IncludeQualifiers parameter to ModifyInstance
621 which they are required to respect. If IncludeQualifiers is
622 false, the qualifiers on the modified instance provided must not
623 be used to update the instance.
624
625 - Providers will be required to return instance names along with
626 instances in the EnumerateInstances method. Clients will receive
627 these instance names, as the standard dictates.
628
629 The providers that are in the Pegasus build have all been updated.
630 However, whenever the PropertyList is not null, the providers throw
631 a NOT_SUPPORTED exception.
632
633 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
634 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
635 the Common module. File Config.h was modified to include the NSK
636 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
637 without the standard (std) namespace.
638
639 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
640 properties to support alternate behavior of the Pegasus repository:
641 repositoryIsDefaultInstanceProvider and repositoryProviderName.
642
643 Using the first one, the repository can be enabled/disabled as the
644 default provider for instance (and association) operations. The default
645 setting is "true", so the default behavior has not been changed. To
646 disable the repository as the default instance provider, issue the
647 following command before starting cimserver:
648
649 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
650
651 The repositoryProviderName configuration property specifies what
652 provider name is used to explicitly register the repository as a
653 provider. This is necessary when the repository needs to serve
654 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
655 to "false". The default value is "repository". To register the
656 repository as an instance provider for a class, add a
657 'Provider("repository")' qualifier to the class definition.
658
659 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
660 pass to providers that act as services. This handle provides
661 service providers with access to the CIMServer data structures.
662
663 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
664 the repository so that it respects the IncludeQualifiers and
665 PropertyList parameters. Updated SetProperty in the repository
666 so that it uses ModifyInstance correctly. The repository now
667 supports GetProperty and SetProperty in addition to ModifyInstance.
668
669 Implemented GetProperty and SetProperty in the Dispatcher and
670 Provider2 so that they get translated to GetInstance and
671 ModifyInstance calls (respectively) in the provider. Providers
672 written to the Provider2 API that correctly process the new
673 ModifyInstance parameters will automatically support SetProperty
674 operations. Note that GetProperty and SetProperty currently only
675 mike 1.51 work for String properties because of an XML encoding limitation.
676
677 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
678 Security components for authentication and authorization.
679
680 Authentication and User Management:
681 cimuser CLI : This CLI is used for addition, modification, removal
682 and listing of CIM Users. The CIM user password is encrypted and stored
683 in a file. The password file format is compatible with Apache's htpasswd
684 generated password file.
685
686 cimauth CLI implement the authorization managment functionality by letting
687 to add/remove/list user authorizations.
688
689 User Manager and User Manager Provider components implement the user
690 management and authorization functionality.
691
692 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
693 under src/Pegasus/WQL which contains library and BNF.
694
695 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
696 mike 1.51 which does provider registration, block, unblock, and stop a provider.
697 It also alert Subscription Service of any provider registration changes.
698
699 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
700 and String.cpp with PEG_min. The _min macro caused problems on the
701 NSK platform because of a duplicate definition in a standard file.
702
703 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
704 subscription service provider that serves as the instance provider for the
705 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
706 classes (from CIM_Events27.mof). The service also takes appropriate action
707 in response to startup, shutdown of the cimom, termination of a provider,
708 or change in provider registration.
709
710 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
711 and the command line interface for shutting down cimom gracefully.
712 For more information, refer to the CIMOM Shutdown working paper
713 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
714
715 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
716 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
717 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
718 constructor to set a pointer to the server-, resp. client wide SSL_Context
719 structure. The Socket field in HTTPConnection is substituted with an
720 MP_Socket pointer, a class that is designed to hide the differences
721 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
722 is defined even in a non-ssl environment.
723 How to use it in a Server or Client:
724 1. Just create an SSL_Context once per Server/Client address space
725 2. Construct every HTTPConnector/Acceptor with a pointer to this
726 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
727 without SSL_Context for conventional connections.
|
728 mike 1.50
|
729 mike 1.51 The Configuration data was extended with the boolean SSL property, and
730 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
731
732 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
733 kumpf 1.61
|
734 mike 1.51 ---------------------------------------------------------------------------
735 Version 1.1 - July 2001 Development branch
736 Tagged as version_1_01 on 3 August 2001 (sorry should have been
737 1.1
738
739 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
740 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
741 and ExportClient classes. the indication.
742
743 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
744 make the delivery of indications over Xml-HTTP and email respectively.
745
746 Provided examples for HandlerTable, XmlIndicationDelivery and
747 SendMailIndicationDelivery to support this implementation.
748
749 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
750 library and a thread-safe message queue (first stage). Classes defined
751 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
752 and SimpleThread.
753
754 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
755 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
756 information on using wbemexec. A simple test script is included. Please
757 see pegasus/src/Clients/wbemexec/tests/readme for information on running
758 the test script.
759
760 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
761 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
762 and
763 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
764 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
765 src/Pegasus/Common/TraceFileHandler.cpp.
766
767 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
768 Config CLI. Please refer to the documentation
769 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
770 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
771 using the config framework and cimconfig CLI. Make sure to load the config
772 mof (src/gmake config) before starting the cimserver. A simple test script
773 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
774 information on running the test script.
775
776 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
777 (changed the H and CPP files for the major CIM objects. These
778 functions generate CIM MOF output for the objects.
779
780 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
781 Authentication provides security mechanism to authenticates CIM clients
782 that
783 connect to CIM Server on the same system without having to specify a
784 password.
785 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
786 This component only works on unix and it's not linked in with the main
787 build.
788 When authentication framework is defined this component may need to be
789 modified to integrate with the framework.
|
790 karl 1.49
791 ---------------------------------------------------------------------------
792 Version 0.99.x (Fixes to version 0.99) in Process
|
793 mike 1.51
|
794 karl 1.49 NOTE: Please do not input anything to this branch except for critical
795 fixes. This is, in effect, 1.0 and we do not want to use it for
796 development.
797
798 ----------------------------------------------------------------------------
799
800 Version 0.98.0 - Work in progress (This number skipped)
|
801 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
802 mike 1.36
|
803 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
804 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
805
|
806 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
807 in the HTML URL reference for passing instance names.
808
|
809 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
810
811 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
812
|
813 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
814 allow slp to compile.
815
|
816 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
817
818 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
819 ids to queue pointers).
820
|
821 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
822 and Dispatcher.
823
|
824 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
825 and
826 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
827 chip 1.44 ResponseHandler for Provider2 interface.
|
828 mike 1.45
829 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
830
831 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
832
|
833 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
834
|
835 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
836
837 12. (Mike Brasher) - Fixed compiler error on Linux.
838
|
839 karl 1.38 ------------------------------------------------------------------------------
840 --
|
841 mike 1.26
|
842 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
843 karl 1.16
844 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
845 for NT and Linux platforms.
|
846 mike 1.26
|
847 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
848 5988.
849 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
850 the DMTF.
|
851 mike 1.26
|
852 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
853 Fusion event. THis included a) extended the test for end of HTTP header from
854 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
855 Extended the HTTP message ID to allow for non-numeric message IDs.
|
856 mike 1.26
|
857 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
858 and created RepositoryDeclContext.{cpp,h}. This is the first step in
859 revamping the compiler to work independently of the repository (grb).
|
860 mike 1.26
|
861 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
862 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
863 Now when you build normally, you will get the committed grammar and parser
864 files instead of generating your own for a particular platform. This should
865 prevent back-level lex and yacc implementations from generating troublesome
866 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
867 bob 1.20 (grb)
|
868 mike 1.26
|
869 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
870 This change paves the way for upcoming changes that will allow the compiler
871 to work indepently of the repository. (grb)
|
872 mike 1.26
|
873 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
874 mike 1.26
|
875 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
876 modifyClass,
|
877 chip 1.22 createClass to protect caller's object.
|
878 mike 1.26
|
879 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
880 directory. These
881 interfaces allow very smart providers to perform advances operations.
882 CIMProviderStub has
|
883 chip 1.23 been updated to support the new interfaces. Needs testing.
|
884 mike 1.26
|
885 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
886 mike 1.26
|
887 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
888 repository you make world, make rebuild or make repository. ks
|
889 mike 1.26
890 12. Added associators() and associatorNames() operations to CIM repository.
|
891 mike 1.27 (MEB)
892
893 13. More on association implementation (all four operations supported).
894 Need to handle deletion of associations and protocol stubs still.
895 Need to test class associations (rather than just instance associations).
896 Need to handle deleteInstance().
897 (MEB)
|
898 mike 1.26
|
899 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
900
|
901 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
902 AssociationName
|
903 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
904 pages.
905
|
906 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
907 sage 1.31
908 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
909 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
910 Made cimserver accept the -D flag to eliminate the need for environment
911 variables.
|
912 mike 1.32
913 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
914 References() and ReferenceNames() CIM operations. These only operate
915 on instances at this time. They will operate on classes soon.
|
916 kumpf 1.34
917 19. (Mike Glantz) Extended and modified dynamic support
918 changes to (1) work on HP-UX and (2) have all images and libraries
919 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
920 change is to program.mak and library-unix.mak, removing specific
921 lists of dynamic library specs and putting them in the Makefile
922 and libraries.mak files that build the actual targets (lots of
923 these now have DYNAMIC_LIBRARIES defined).
|
924 karl 1.35
925 20. (Karl) added basic Queue function to common (based on array) and added
926 tests for stack and queue.
|
927 karl 1.38
928 ------------------------------------------------------------------------------
929 --
|
930 mike 1.36
|
931 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
932 karl 1.11
|
933 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
934 CIMServer (both)
|
935 karl 1.11 Functions added include:
936 a. Enable trace to log file.
|
937 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
938 is
|
939 karl 1.11 trace to log, -t is trace to console).
940 c. add parameter in optionsrow for help message and enable the capture
|
941 karl 1.12 of these messages in Options class. Also added help print that
942 prints these things out. However, format not to beautiful.
|
943 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
944 e. Extend the Clients\testclient so he does tests on Namespace.
|
945 karl 1.15 2. (KS)Extended Log to show time, severity.
|
946 mike 1.33
|
947 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
948 mike 1.33
|
949 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
950 logs
|
951 karl 1.12 are put
|
952 mike 1.33
|
953 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
954 This is a preliminary version.
|
955 mike 1.33
|
956 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
957 karl 1.13 throws CannotBind exception.
|
958 mike 1.33
|
959 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
960 not
|
961 karl 1.14 print out all of the message. At the least it prints out the error message
962 and components of the message causing the problem.
|
963 mike 1.33
|
964 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
965 mike 1.33
|
966 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
967 karl 1.14 existed.
|
968 mike 1.33
969 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
970 karl 1.15
|
971 karl 1.29 ------------------------------------------------------------------------------
972 --
|
973 karl 1.6 Version 0.97.2
974
975 1. Extend HP UX port to correctly load Dynamic Load Libraries.
976 2. Extend Formatter for Boolean and Uint32 types.
977 3. Change CIM Server to use Trace (-t) flag. This also changed
978 Handler.h to work off of flag.
979 4. Minor corrections to __Namespace Provider.
980 5. Extend tests for Formatter, String, and other modules.
981 6. Correct errors in documentation.
982 7. New working papers (provider interface).
|
983 karl 1.8 8. Add Providerreg.exe tool.
984 9. Add trace output for messages sent from the Server.
|
985 mike 1.26
|
986 karl 1.29 ------------------------------------------------------------------------------
987 --
|
988 mike 1.26
|
989 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
990 karl 1.5
|
991 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
992 find functions. Note: This symbol is defined in config.h. (ks).
993
|
994 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
995 of dynamic lib loaading.
|
996 karl 1.1
997
|
998 karl 1.29 ------------------------------------------------------------------------------
999 --
|
1000 mike 1.26
|
1001 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
1002 karl 1.1
1003 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1004 qualifiers, methods.
1005 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1006 methods.
1007 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1008 qualifiers and to
1009 remove qualifiers.
1010 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1011 compiler. It probably imposed more limitations than would be required with
|
1012 karl 1.2 the current compiler. This version of the port produces an excessively large
1013 common module due to template bloat. That problem will be fixed in a future
1014 change to the port. Also there are a log of duplicate symbol warnings generate
1015 by the AIC compiler but these cause no problems. The port has been tested
1016 with the complete unit test and client/server test successfully.
|
1017 karl 1.1
1018 --------------------------------------------------------------------------
|
1019 karl 1.2
|
1020 mike 1.4 23 May 2001
|
1021 karl 1.1
|
1022 mike 1.9 1. Ported to HPUX
|
1023 karl 1.5
|
1024 mike 1.9 --------------------------------------------------------------------------
1025
1026 29 May 2001
1027
1028 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1029 mike 1.51
1030
1031
1032
|
1033 karl 1.48
|
1034 karl 1.38
|
1035 karl 1.30
|
1036 karl 1.29
|
1037 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc