1 karl 1.1 CHANGE LOG FOR PEGASUS
|
2 karl 1.59
3
4 Version 1.07 working towards 1.1 - Started 4 Feb 2002
5 Started just before cutover to the new dispatcher, etc.
6 TAG: VERSION_1_07
7
8 1. KS - Updated pegsusversion to 1.07 and tagged file.
9
|
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
|
11 karl 1.59
|
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner
13 class to support PEGASUS_HOME dependent properties like Repository
14 location, Provider location and Consumer location.
15 The default location for these properties continue to be the same
16 as before. Added support to the Config Manager to own the
17 Pegasus Home variable and implemented method (getHomedPath) to
18 return absolute paths based from Pegasus Home.
19
20 For more information look in to the following files:
21 pegasus/src/Pegasus/Config/ConfigManager.h
22 pegasus/src/Pegasus/Config/ConfigManager.cpp
23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h
24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp
25
26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
|
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only
28 reset when a value is "set" or copied into them. the XML and MOF
29 also deliver a NULL value back when the state of the CIMValue is NULL.
30 There is a remaining addition to put an exception on CIMValue gets when
31 the NULL attribute is set that we will install later.
|
32 karl 1.63
|
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
|
34 karl 1.62
|
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
|
36 karl 1.64 Note that this version of the paper still needs work.
37
|
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
|
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal()
40 method is used. Added a new method lookupPort() in System.h to return the system
41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use
42 modified CIMClient connectLocal() interface.
43
|
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
|
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and
46 will be deleted.
47
|
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests
49
50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
|
51 karl 1.66
|
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented
53 checks for privileged user when performing authorization.
54 Added a configuration property enableRemotePrivilegedUserAccess.
55 This property needs to be set to true to enable privileged user access
56 for remote clients.
|
57 karl 1.66
|
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic
59 method (InvokeMethod) operations. This change involves the addition
60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag
61 allows the server to determine the type of a parameter value without
62 having to look up the method definition in the schema. It also allows
63 the client API to do the same for output parameters as well as return
64 values.
65
66 PROVIDER IMPLICATIONS:
67
68 Method providers ARE affected by this change. Previously, all input
69 parameters to invokeMethod were sent to the provider as String type
70 regardless of what the client actually specified or how the method
71 was defined. With this change, providers will now receive input
72 parameters of the type that was actually specified by the client
73 application (regardless of how the method was defined in the schema).
74
75 However, parameters coming from clients other than the Pegasus client
76 API may omit the PARAMTYPE attribute. In this case, the operation
77 processor (currently dispatcher) will find these "typeless" parameters
78 and convert them to the correct type based on the method definition.
79 kumpf 1.68 The result is that if the client specifies the parameter type in the
80 XML encoding (as the Pegasus client API does), the method provider
81 will receive the type specified by the client; if the client does not
82 specify the parameter type, the method provider will see the type
83 specified in the method definition.
84
85 CLIENT IMPLICATIONS:
86
87 Clients ARE affected by this change. Any output parameters that are
88 returned from Pegasus (or other CIM servers using the PARAMTYPE
89 attribute) will now be received by Pegasus clients as the same type
90 sent by the server. Previously, they would have always been of
91 String type. In addition, the return value will be received as the
92 correct type rather than as a String.
93
94 Parameters coming from servers other than Pegasus may omit the
95 PARAMTYPE attribute. In this case, the client will see a
96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type
97 String. Similarly, return values coming from other servers that omit
98 PARAMTYPE will be seen by the client as String type. These return
99 values will NOT have the CIMType::NONE hint that parameters get,
100 kumpf 1.68 because they are CIMValues rather than CIMParamValues.
101
102 This behavior will remain for the forseeable future (through
103 Pegasus version 2), as it is not possible to require that other
104 implementations use the PARAMTYPE attribute.
105
106 SIDE EFFECTS:
107
108 In the process of implementing this functionality, I discovered
109 that there was no way to set a CIMValue to be an array of
110 CIMReferences. This appeared to be an oversight, since method
111 parameters are permitted to be arrays of CIMReferences. I've
112 added the necessary functionality to the CIMValue class.
113
114 I also found that the CIMParamValue class needed significant
115 clean-up, which I completed.
116
117 SETPROPERTY CHANGES:
118
119 A similar problem in SetProperty operations was addressed by
120 "typing" the specified property value in the operation processor
121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the
122 relevant schema to get the property definition, and then converting
123 the specified value to that property's type.
124
125 The SetProperty operation encoding has not changed to accomodate
126 inclusion of type information that would obviate the need for this
127 extra processing. However, clients can avoid this overhead by using
128 ModifyInstance operations (with a property list) instead of SetProperty.
129
130 The GetProperty operation also has NOT been updated with type
131 information. Client applications using the Pegasus client API will
132 always receive String or reference values when calling GetProperty
133 against any server (Pegasus or not). Clients that require properties
134 to be returned as the correct type must use GetInstance (perhaps with
135 a property list) rather than GetProperty.
136
|
137 kumpf 1.69 13. (Roger Kumpf - HP) 22 Feb 2002 - Reworked the CIMParamValue class.
138 Instead of being composed of a CIMParameter and a CIMValue, this
139 class is now composed of a String (parameter name) and a CIMValue.
140 This change removes the redundancy of having the type, isArray,
141 and arraySize members in both the CIMParameter and the CIMValue.
142 The new CIMParamValue definition is more consistent with the XML
143 encoding of parameter values.
144
145 An isTyped member was also added to CIMParamValue to support the
146 behavior outlined in item 12 above. Clients should use the isTyped()
147 method to determine whether the output parameters returned from
148 InvokeMethod operations are of the correct type, or whether they
149 have defaulted to String type.
|
150 kumpf 1.68
|
151 karl 1.59 -------------------------------------------------------------------
|
152 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001
153
154 1. Merged back to Main branch. All general development will be in main branch
155 in the future with releases in side branches. Special side developments
156 may temporarily be in side branches.
157 Changed cimversion to 1.06. We will do 1.1 based on functionality.
|
158 karl 1.53
159 2. (Karl) 18 December 2001 - Added new directory repositories where repository
160 implementations will be kept to separate them from the
161 repository interface defintion. Initial implementation is genericfile
162 which is the current file based repository.
163
164 Added new build variable RMREPOSITORY which is a generic MAKE command
165 to remove an existing repository. It simply substitutes for the RMDIRHIER
166 command at this point but we will make this a generic part of system
167 in the future.
|
168 karl 1.52
|
169 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder
170 to check that all required parameters for intrinsic methods are
171 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER
172 exception is thrown. Also added checks for duplicate parameters in the
173 intrinsic methods. If a parameter is specified more than once, a
174 CIM_ERR_INVALID_PARAMETER exception is thrown.
175
|
176 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
|
177 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder
178 queue to this new queue. Modified CIMServer.cpp to create
179 CIMOperationRequestAuthorizer queue only when authorization is enabled.
180 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make
181 it available to the CIMOperationRequestDispatcher.
182
|
183 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
|
184 mary 1.56 runs as a Windows service. The work thread was exiting instead of running
185 forever. The problem was noticed when the TestClient program and CIMserver
186 service were both running. The service wasn't accessible to the TestClient
187 program.
188
|
189 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription,
190 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed
191 in new queue, IndicationService which will get invoked from dispatcher.
192 CIM_CREATE_INSTANCE_REQUEST_MESSAGE
193 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE
194 CIM_DELETE_INSTANCE_REQUEST_MESSAGE
195 CIM_GET_INSTANCE_REQUEST_MESSAGE
196 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE
197 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE
198
199 This new service will also take care of processing the indications on receiving
200 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from
201 IndicationProvider or some other mechanism which is not yet clear.
202
203 IndicationService will also receive following messages from PG_ProviderRegistration
204 when a new IndicationProvider will get registered.
205 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE
206 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE
207
208 I had also defined new Indication Provider APIs, enableIndication, disableIndication
209 and modifyIndication with more parameters passed and eventually planning to terminate
210 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a
211 plan to implement one more call as startIndication and will be done soon.
212
213 There are three new test programs in IndicationService directory, which will create
214 Filter, Indication and Subscription instances using IndicationService.
215
216 Also modified sample IndicationProvider code with the new APIs introduced.
|
217 mary 1.56
|
218 karl 1.52 -------------------------------------------------------------------------
|
219 karl 1.1
|
220 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
221 current working dev branch of build
|
222 mike 1.36
|
223 karl 1.49 ---------------------------------------------------------------------------
224 Version 1.1 - July 2001 Development branch (Work in PRogress)
225
|
226 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
227 PARAMETER.REFERENCE constructs for references).
228
229 2. (Mike Brasher) Reworked server communication into new module scheme.
|
230 mike 1.51 =======
231 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
232 seen as part of CGIclient class displays.
233
234 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
235 to the final version in Schemas\CIM25. This included minor
236 corrections, etc and a couple of file changes. This is the
237 official final CIM 25 schema relesed by the DMTF. This change
238 should not affect any current work.
239 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
240 directorys. Note however that today the make repository still
241 loads the 2.5 schema.
242
243 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
244 on XML output.
245
246 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
247 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
248 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
249 declarations in for loop initializers outside the loop, so multiple
250 "for (int i=0; i<10; i++);" statements cause a compile error.
251 mike 1.51
252 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
253 dependency on the config files at the start of the cimserver. Now the
254 cimserver will use in-memory default values in the absence of config files
255 and command line options. Fixed a few defects in the config framework that
256 were causing cimom to crash under certain conditions. Changed the config
257 provider class name to 'PG_ConfigSetting' in the mof file and modified
258 provider implementation files accordingly. Also modified the config CLI
259 to show user friendly error/status messages.
260
261 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
262 (reported incorrect line number on error in XML request if input redirected).
263 Enhanced the -d debug command line option to allow more flexibility in
264 generating debug output.
265
266 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
267 xml when it generates xml output.
268
269 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
270 a common file to reduce the number of files required by the default
271 repository implementation.
272 mike 1.51
273 10. (Mike Brasher) - Fixed minor bug in repository implementation.
274
275 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
276
277 12. (Mike Brasher) - Committed rework of server into queue approach.
278
279 13. (Mike Brasher) - New webserver and webclient examples.
280
281 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
282
283 15. (Mike Brasher) - Initial work on refactorying client into modules.
284 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
285
286 16. (Mike Brasher) - queue-based clients now complete.
287
288 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
289
290 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
291
292 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
293 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
294 a web server. See doc/Servlet for more information.
295
296 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
297 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
298 input and output can be written in a trace file.
299
300 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
301 Created new class SignalHandler that allow registration, activation and
302 deactivation of signal handler functions (Linux only !).
303
304 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
305 ExportClient to support ExportIndication. DisplayConsumer, a sample
306 consumer is added which will consume (by displaying on screen) the
307 indication exported by CIMExportRequestDispatcher. This complete
308 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
309 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
310 are modified to implement above messages.
311
312 XmlIndicationDispatcher test program is modified to test complete
313 operation. It now creates a consumer, handler and indication
314 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
315 indication to consumer. This program needs
316 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
317 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
318 in the repository to complete the test successfully. This test
319 program also needs Handler qualifier defined in repository and
320 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
321 below:
322
323 //====================================================================
324 // CIM_IndicationHandlerXMLHTTP
325 //====================================================================
326 [Description (
327 "CIM_IndicationHandlerXMLHTTP describes the destination for "
328 "Indications to be delivered via HTTP, using a cimXML "
329 "representation."), Handler ("CIMxmlIndicationHandler") ]
330
331 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
332 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
333 a provider library.
334
335 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
336 interface for the provider. InvokeMethod currently uses CIMValue as
337 type for inParameters and outParameters, which are unable to give
338 information about param name, type and value. This should be changed
339 to CIMParamValue which will help providers to know details of the
340 parameter name and type along with value passed through InvoleMethod
341 call. Current implementation uses CIMParamValue as parameters while
342 travelling through message queues and converts it back to array of
343 CIMValue before calling Provider API (which needs to be changed
344 later).
345
346 Also added are two test programs:
347
348 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
349 CIMParamValue class.
350
351 src/Pegasus/Client/tests/InvokeMethod - which makes call to
352 InvokeMethod and displays the return value. Current
353 implementation assumes that provider had returned true value
354 and outParameters (which are now hard coded in
355 CIMOperationRequestDispatcher to implement functionality)
356 mike 1.51 which are passed as response of InvokeMethod to client.
357
358 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
359 authentication to the pegasus code. Created an Authentication Manager
360 and authenticator interfaces. The file based local authentication
361 module has been modified to implement the local authenticator
362 interface, to generate the challenge for the unauthorized requests
363 and to verify the authentication.
364
365 A skeleton program has been created for the Basic Authenticator.
366 This code is in the Security/Authentication directory which is not
367 yet linked into the build.
368
369 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
370 Decoders. Earlier decoders were sending requests and responses
371 before finishing complete Xml parse. This was prone to send
372 request/response even the Xml is wrong after the MethodCall.
373 New changes collects the Message* as return value from the
374 appropriate functions while parsing the Xml and sends on
375 _outputQueue only when Xml is parsed successfully.
376
377 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
378 fix the problem with constructing provider name and loading the
379 providers for unix platforms. Also moved the shared library name
380 construction (appending .sl or .so) from
381 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
382 ProviderModule.cpp and included it in a method that returns
383 provider file path name.
384
385 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
386 Handler. This handler extracts MappingStrings qualifier from class
387 definition and converts it into SNMP specific trap data. The trap
388 structure is defined in a abstract class in snmpDeliverTrap.h file.
389 Every one has his or her own SNMP agent, which will talk with master
390 agent to deliver the trap or may have some other mechanism.
391 Extending snmpDeliverTrap class and deliverTrap method will help to
392 implement specific trap delivery mechanism.
393
394 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
395 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
396 property value to be default in the plan file, remove the property from the
397 plan file. Converted ConfigSettingProvider to use provider2 library.
398 mike 1.51
399 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
400 to allow tracing of a specific number of bytes in a given
401 string. Also modified the XmlIO trace code to use the new interface.
402 Changed the config file defaults for tracing.
403
404 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
405 NonStop platform (NSK) in directory pegasus/mak. The following files
406 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
407 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
408 program-unix.mak. The original program.mak which previously covered
409 all platforms was split into platform-specific make files, and now
410 only contains conditionals. Files config.mak, objects.mak, and
411 library.mak were changed to include the NSK files.
412 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
413
414 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
415 commas (,) in the string values of key properties.
416
417 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
418
419 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
420 pegasus/mak/program-windows.mak that prevented program builds for
421 the windows platform (related to change from 28 Oct). Replaced
422 leading whitespace in front of commands with tabs as required
423 in make files.
424
425 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
426 because getting an error in 26
427
428 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
429 whose types are references. These reference values must be
430 treated specially in the XML encoding, using the VALUE.REFERENCE
431 tag structure.
432
433 Pegasus had been passing reference values simply as String values.
434 For example, EnumerateInstanceNames returned KEYVALUEs of string
435 type rather than VALUE.REFERENCEs.
436
437 I've modified the XmlReader::getKeyBindingElement() and
438 CIMReference::instanceNameToXml() methods to read and write the
439 XML in the proper format. However, making that change required
440 mike 1.51 that a CIMReference object be able to distinguish between a key
441 of String type and a key of reference type.
442
443 I've modified the String format of CIMReferences slightly to
444 allow efficient processing of references whose keys are also of
445 reference type. The "official" form uses the same encoding for
446 key values of String type and of reference type, and so it
447 would be necessary to retrieve the class definition and look up
448 the types of the key properties to determine how to treat the
449 key values. This is clearly too inefficient for internal
450 transformations between CIMReferences and String values.
451
452 The workaround is to encode a 'R' at the beginning of the value
453 for a key of reference type (before the opening '"'). This allows
454 the parser to know a priori whether the key is of String or
455 reference type.
456
457 In this example:
458
459 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
460
461 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
462 the usual encoding. Key2 is a reference property, so the extra 'R'
463 is inserted before its encoded value. Note that this algorithm is
464 recursive, such that RefClass could include KeyC of reference type,
465 which would also get encoded with the 'R' notation.
466
467 The toString() method inserts the 'R' to provide symmetry. A new
468 KeyBinding type (REFERENCE) has been defined to denote keys in a
469 CIMReference that are of reference type. This KeyBinding type must
470 be used appropriately for CIMReference::ttoString() to behave
471 correctly.
472
473 The files that have been modified to make this change are
474 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
475
476 A result of this change is that instances names in the instance
477 repository will include this extra 'R' character. Thus, you will
478 need to repopulate your repository when you download the latest
479 CIMOM version.
480
481 Note that for user-facing uses of the String encoding of instance
482 mike 1.51 names (such as might appear in MOF for static association
483 instances or in the CGI client), this solution is non-standard and
484 therefore unacceptable. It is likely that these points will need
485 to process the more expensive operation of retrieving the class
486 definition to determine the key property types.
487
488 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
489 in case of error in setting trace components. Modified the property owner
490 init and update methods. Submitted the pegasus/mak/Buildmakefile with
491 cleanbuild, rebuild and trace configuration options.
492
493 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
494 (instanceName).
495
496 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
497 GetProperty/SetProperty/EnumerateInstances request/response messages.
498 Added encoding and decoding of PropertyList parameters on all
499 relevant intrinsic methods.
500
501 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
502 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
503 mike 1.51
504 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
505 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
506 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
507 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
508 SystemNsk.cpp) contain stubs. The associated control files
509 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
510 nsk platform links.
511
512 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
513 toString() method for CIMValues of String type. The old behavior
514 returned an XML encoding of the String with special characters
515 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
516 would be returned as a"b. The new behavior just returns the
517 String value directly with no translation. (Note that
518 CIMValue.toXml() may still be used to get the XML-encoded value.)
519
520 This change was necessary in part to correct the behavior of the
521 repository. CreateInstance stores the instance name returned by
522 CIMInstance.getInstanceName(), which is built using calls to
523 CIMValue.toString(). GetInstance searches for the instance name
524 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
525 be successful, CreateInstance must have stored the instance name
526 in that same form, without special character encoding.
527
528 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
529 the CIMValue class. Eliminated improper use of CIMValue.toString(),
530 often replacing with CIMValue.get(String&) or CIMValue.toXml().
531 Also added some error handling in the indication handlers.
532
533 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
534 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
535 to handle local instance path and local classpath. Modified the
536 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
537 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
538
539 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
540 to hold the argument to ModifyInstance and the return values
541 from EnumerateInstances. The client and provider APIs need to
542 be updated to use this class.
543
544 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
545 mike 1.51 source files. This CLI allows addition, modification, removal and listing
546 of CIM users. The CLI is not linked to the main makefile as the Provider
547 functionality is yet to be implemented. Added the function
548 String getPassword(char* prompt) to the System.h and cpp files.
549
550 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
551 the server to challenge the unauthorized requests, authenticate
552 the challenge responses, and verify the subsequent authorized requests.
553 Implemented authentication mechanism on the Client api to send
554 responses to the challenges from the server. Current implementation
555 supports only 'local' authentication mechanism.
556
557 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
558
559 - Changed the return value of EnumerateInstances from Array<CIMInstance>
560 to Array<CIMNamedInstance>
561 - Changed the parameter to ModifyInstance from CIMInstance to
562 CIMNamedInstance
563 - Added an optional PropertyList parameter to ModifyInstance
564 - Changed all handling of PropertyList parameters to use the
565 CIMPropertyList class instead of Array<String>
566 mike 1.51
567 Each of these changes was required to comply with the DMTF specification.
568
569 These changes were made throughout the system except for in the provider
570 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
571 differences from providers, so older providers will continue to function.
572 However, this means that clients can not yet take advantage of the added
573 functionality.
574
575 When the provider API is updated, the following changes will be visible:
576
577 - Providers will get a PropertyList parameter to ModifyInstance which
578 they are required to respect. Providers that can not process the
579 PropertyList must throw a NOT_SUPPORTED exception whenever the
580 list is not null. Clients can take advantage of this change by
581 issuing a ModifyInstance request against a selected set of
582 properties in an instance, rather than being required to replace
583 the entire instance.
584
585 - Providers will be required to return instance names along with
586 instances in the EnumerateInstances method. Clients will receive
587 mike 1.51 these instance names, as the standard dictates.
588
589 - Providers will receive a CIMPropertyList argument containing the
590 PropertyList instead of an Array<String>. This change allows
591 providers to distinguish between an empty list and a null list.
592
593 Note that the repository also does not yet handle the PropertyList in
594 ModifyInstance correctly.
595
596 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
597 provider API to match the changes made to the EnumerateInstances and
598 ModifyInstance operations. These changes were made to comply with
599 the DMTF specification.
600
601 The original Provider API has not been updated, and I have no
602 plans to do so. Providers written to the original API will
603 continue to function, but they will not have the opportunity
604 to take advantage of the features that have been added.
605
606 The significant changes to the Provider2 API are:
607
608 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
609 they are required to respect. Providers that can not process the
610 PropertyList must throw a NOT_SUPPORTED exception whenever the
611 list is not null. Clients can take advantage of this change by
612 issuing a ModifyInstance request against a selected set of
613 properties in an instance, rather than being required to replace
614 the entire instance.
615
616 - Providers will get an IncludeQualifiers parameter to ModifyInstance
617 which they are required to respect. If IncludeQualifiers is
618 false, the qualifiers on the modified instance provided must not
619 be used to update the instance.
620
621 - Providers will be required to return instance names along with
622 instances in the EnumerateInstances method. Clients will receive
623 these instance names, as the standard dictates.
624
625 The providers that are in the Pegasus build have all been updated.
626 However, whenever the PropertyList is not null, the providers throw
627 a NOT_SUPPORTED exception.
628
629 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
630 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
631 the Common module. File Config.h was modified to include the NSK
632 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
633 without the standard (std) namespace.
634
635 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
636 properties to support alternate behavior of the Pegasus repository:
637 repositoryIsDefaultInstanceProvider and repositoryProviderName.
638
639 Using the first one, the repository can be enabled/disabled as the
640 default provider for instance (and association) operations. The default
641 setting is "true", so the default behavior has not been changed. To
642 disable the repository as the default instance provider, issue the
643 following command before starting cimserver:
644
645 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
646
647 The repositoryProviderName configuration property specifies what
648 provider name is used to explicitly register the repository as a
649 provider. This is necessary when the repository needs to serve
650 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
651 to "false". The default value is "repository". To register the
652 repository as an instance provider for a class, add a
653 'Provider("repository")' qualifier to the class definition.
654
655 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
656 pass to providers that act as services. This handle provides
657 service providers with access to the CIMServer data structures.
658
659 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
660 the repository so that it respects the IncludeQualifiers and
661 PropertyList parameters. Updated SetProperty in the repository
662 so that it uses ModifyInstance correctly. The repository now
663 supports GetProperty and SetProperty in addition to ModifyInstance.
664
665 Implemented GetProperty and SetProperty in the Dispatcher and
666 Provider2 so that they get translated to GetInstance and
667 ModifyInstance calls (respectively) in the provider. Providers
668 written to the Provider2 API that correctly process the new
669 ModifyInstance parameters will automatically support SetProperty
670 operations. Note that GetProperty and SetProperty currently only
671 mike 1.51 work for String properties because of an XML encoding limitation.
672
673 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
674 Security components for authentication and authorization.
675
676 Authentication and User Management:
677 cimuser CLI : This CLI is used for addition, modification, removal
678 and listing of CIM Users. The CIM user password is encrypted and stored
679 in a file. The password file format is compatible with Apache's htpasswd
680 generated password file.
681
682 cimauth CLI implement the authorization managment functionality by letting
683 to add/remove/list user authorizations.
684
685 User Manager and User Manager Provider components implement the user
686 management and authorization functionality.
687
688 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
689 under src/Pegasus/WQL which contains library and BNF.
690
691 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
692 mike 1.51 which does provider registration, block, unblock, and stop a provider.
693 It also alert Subscription Service of any provider registration changes.
694
695 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
696 and String.cpp with PEG_min. The _min macro caused problems on the
697 NSK platform because of a duplicate definition in a standard file.
698
699 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
700 subscription service provider that serves as the instance provider for the
701 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
702 classes (from CIM_Events27.mof). The service also takes appropriate action
703 in response to startup, shutdown of the cimom, termination of a provider,
704 or change in provider registration.
705
706 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
707 and the command line interface for shutting down cimom gracefully.
708 For more information, refer to the CIMOM Shutdown working paper
709 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
710
711 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
712 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
713 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
714 constructor to set a pointer to the server-, resp. client wide SSL_Context
715 structure. The Socket field in HTTPConnection is substituted with an
716 MP_Socket pointer, a class that is designed to hide the differences
717 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
718 is defined even in a non-ssl environment.
719 How to use it in a Server or Client:
720 1. Just create an SSL_Context once per Server/Client address space
721 2. Construct every HTTPConnector/Acceptor with a pointer to this
722 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
723 without SSL_Context for conventional connections.
|
724 mike 1.50
|
725 mike 1.51 The Configuration data was extended with the boolean SSL property, and
726 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
727
728 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
|
729 kumpf 1.61
|
730 mike 1.51 ---------------------------------------------------------------------------
731 Version 1.1 - July 2001 Development branch
732 Tagged as version_1_01 on 3 August 2001 (sorry should have been
733 1.1
734
735 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
736 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
737 and ExportClient classes. the indication.
738
739 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
740 make the delivery of indications over Xml-HTTP and email respectively.
741
742 Provided examples for HandlerTable, XmlIndicationDelivery and
743 SendMailIndicationDelivery to support this implementation.
744
745 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
746 library and a thread-safe message queue (first stage). Classes defined
747 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
748 and SimpleThread.
749
750 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
751 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
752 information on using wbemexec. A simple test script is included. Please
753 see pegasus/src/Clients/wbemexec/tests/readme for information on running
754 the test script.
755
756 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
757 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
758 and
759 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
760 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
761 src/Pegasus/Common/TraceFileHandler.cpp.
762
763 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
764 Config CLI. Please refer to the documentation
765 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
766 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
767 using the config framework and cimconfig CLI. Make sure to load the config
768 mof (src/gmake config) before starting the cimserver. A simple test script
769 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
770 information on running the test script.
771
772 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
773 (changed the H and CPP files for the major CIM objects. These
774 functions generate CIM MOF output for the objects.
775
776 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
777 Authentication provides security mechanism to authenticates CIM clients
778 that
779 connect to CIM Server on the same system without having to specify a
780 password.
781 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
782 This component only works on unix and it's not linked in with the main
783 build.
784 When authentication framework is defined this component may need to be
785 modified to integrate with the framework.
|
786 karl 1.49
787 ---------------------------------------------------------------------------
788 Version 0.99.x (Fixes to version 0.99) in Process
|
789 mike 1.51
|
790 karl 1.49 NOTE: Please do not input anything to this branch except for critical
791 fixes. This is, in effect, 1.0 and we do not want to use it for
792 development.
793
794 ----------------------------------------------------------------------------
795
796 Version 0.98.0 - Work in progress (This number skipped)
|
797 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
798 mike 1.36
|
799 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
800 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
801
|
802 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
803 in the HTML URL reference for passing instance names.
804
|
805 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
806
807 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
808
|
809 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
810 allow slp to compile.
811
|
812 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
813
814 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
815 ids to queue pointers).
816
|
817 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
818 and Dispatcher.
819
|
820 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
821 and
822 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
823 chip 1.44 ResponseHandler for Provider2 interface.
|
824 mike 1.45
825 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
826
827 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
828
|
829 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
830
|
831 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
832
833 12. (Mike Brasher) - Fixed compiler error on Linux.
834
|
835 karl 1.38 ------------------------------------------------------------------------------
836 --
|
837 mike 1.26
|
838 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
839 karl 1.16
840 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
841 for NT and Linux platforms.
|
842 mike 1.26
|
843 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
844 5988.
845 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
846 the DMTF.
|
847 mike 1.26
|
848 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
849 Fusion event. THis included a) extended the test for end of HTTP header from
850 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
851 Extended the HTTP message ID to allow for non-numeric message IDs.
|
852 mike 1.26
|
853 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
854 and created RepositoryDeclContext.{cpp,h}. This is the first step in
855 revamping the compiler to work independently of the repository (grb).
|
856 mike 1.26
|
857 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
858 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
859 Now when you build normally, you will get the committed grammar and parser
860 files instead of generating your own for a particular platform. This should
861 prevent back-level lex and yacc implementations from generating troublesome
862 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
863 bob 1.20 (grb)
|
864 mike 1.26
|
865 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
866 This change paves the way for upcoming changes that will allow the compiler
867 to work indepently of the repository. (grb)
|
868 mike 1.26
|
869 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
870 mike 1.26
|
871 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
872 modifyClass,
|
873 chip 1.22 createClass to protect caller's object.
|
874 mike 1.26
|
875 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
876 directory. These
877 interfaces allow very smart providers to perform advances operations.
878 CIMProviderStub has
|
879 chip 1.23 been updated to support the new interfaces. Needs testing.
|
880 mike 1.26
|
881 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
882 mike 1.26
|
883 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
884 repository you make world, make rebuild or make repository. ks
|
885 mike 1.26
886 12. Added associators() and associatorNames() operations to CIM repository.
|
887 mike 1.27 (MEB)
888
889 13. More on association implementation (all four operations supported).
890 Need to handle deletion of associations and protocol stubs still.
891 Need to test class associations (rather than just instance associations).
892 Need to handle deleteInstance().
893 (MEB)
|
894 mike 1.26
|
895 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
896
|
897 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
898 AssociationName
|
899 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
900 pages.
901
|
902 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
903 sage 1.31
904 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
905 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
906 Made cimserver accept the -D flag to eliminate the need for environment
907 variables.
|
908 mike 1.32
909 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
910 References() and ReferenceNames() CIM operations. These only operate
911 on instances at this time. They will operate on classes soon.
|
912 kumpf 1.34
913 19. (Mike Glantz) Extended and modified dynamic support
914 changes to (1) work on HP-UX and (2) have all images and libraries
915 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
916 change is to program.mak and library-unix.mak, removing specific
917 lists of dynamic library specs and putting them in the Makefile
918 and libraries.mak files that build the actual targets (lots of
919 these now have DYNAMIC_LIBRARIES defined).
|
920 karl 1.35
921 20. (Karl) added basic Queue function to common (based on array) and added
922 tests for stack and queue.
|
923 karl 1.38
924 ------------------------------------------------------------------------------
925 --
|
926 mike 1.36
|
927 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
928 karl 1.11
|
929 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
930 CIMServer (both)
|
931 karl 1.11 Functions added include:
932 a. Enable trace to log file.
|
933 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
934 is
|
935 karl 1.11 trace to log, -t is trace to console).
936 c. add parameter in optionsrow for help message and enable the capture
|
937 karl 1.12 of these messages in Options class. Also added help print that
938 prints these things out. However, format not to beautiful.
|
939 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
940 e. Extend the Clients\testclient so he does tests on Namespace.
|
941 karl 1.15 2. (KS)Extended Log to show time, severity.
|
942 mike 1.33
|
943 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
944 mike 1.33
|
945 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
946 logs
|
947 karl 1.12 are put
|
948 mike 1.33
|
949 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
950 This is a preliminary version.
|
951 mike 1.33
|
952 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
953 karl 1.13 throws CannotBind exception.
|
954 mike 1.33
|
955 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
956 not
|
957 karl 1.14 print out all of the message. At the least it prints out the error message
958 and components of the message causing the problem.
|
959 mike 1.33
|
960 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
961 mike 1.33
|
962 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
963 karl 1.14 existed.
|
964 mike 1.33
965 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
966 karl 1.15
|
967 karl 1.29 ------------------------------------------------------------------------------
968 --
|
969 karl 1.6 Version 0.97.2
970
971 1. Extend HP UX port to correctly load Dynamic Load Libraries.
972 2. Extend Formatter for Boolean and Uint32 types.
973 3. Change CIM Server to use Trace (-t) flag. This also changed
974 Handler.h to work off of flag.
975 4. Minor corrections to __Namespace Provider.
976 5. Extend tests for Formatter, String, and other modules.
977 6. Correct errors in documentation.
978 7. New working papers (provider interface).
|
979 karl 1.8 8. Add Providerreg.exe tool.
980 9. Add trace output for messages sent from the Server.
|
981 mike 1.26
|
982 karl 1.29 ------------------------------------------------------------------------------
983 --
|
984 mike 1.26
|
985 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
986 karl 1.5
|
987 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
988 find functions. Note: This symbol is defined in config.h. (ks).
989
|
990 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
991 of dynamic lib loaading.
|
992 karl 1.1
993
|
994 karl 1.29 ------------------------------------------------------------------------------
995 --
|
996 mike 1.26
|
997 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
998 karl 1.1
999 1. Added methods in CIMClass, CIMInstance, for existance of properties,
1000 qualifiers, methods.
1001 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
1002 methods.
1003 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
1004 qualifiers and to
1005 remove qualifiers.
1006 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
1007 compiler. It probably imposed more limitations than would be required with
|
1008 karl 1.2 the current compiler. This version of the port produces an excessively large
1009 common module due to template bloat. That problem will be fixed in a future
1010 change to the port. Also there are a log of duplicate symbol warnings generate
1011 by the AIC compiler but these cause no problems. The port has been tested
1012 with the complete unit test and client/server test successfully.
|
1013 karl 1.1
1014 --------------------------------------------------------------------------
|
1015 karl 1.2
|
1016 mike 1.4 23 May 2001
|
1017 karl 1.1
|
1018 mike 1.9 1. Ported to HPUX
|
1019 karl 1.5
|
1020 mike 1.9 --------------------------------------------------------------------------
1021
1022 29 May 2001
1023
1024 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
1025 mike 1.51
1026
1027
1028
|
1029 karl 1.48
|
1030 karl 1.38
|
1031 karl 1.30
|
1032 karl 1.29
|
1033 mike 1.10
|