pegasus/doc/changelog.txt - annotate

Return to changelog.txt CVS log

Up to [Pegasus] / pegasus / doc

1 karl 1.1 CHANGE LOG FOR PEGASUS
2 karl 1.59 3 4 Version 1.07 working towards 1.1 - Started 4 Feb 2002 5 Started just before cutover to the new dispatcher, etc. 6 TAG: VERSION_1_07 7 8 1. KS - Updated pegsusversion to 1.07 and tagged file. 9
10 sage 1.60 2. (Markus Mueller) 05 Feb 2002 - AIX support.
11 karl 1.59
12 kumpf 1.67 3. (Sushma Fernandes - HP) 13 Feb 2002 Implemented FileSystemPropertyOwner 13 class to support PEGASUS_HOME dependent properties like Repository 14 location, Provider location and Consumer location. 15 The default location for these properties continue to be the same 16 as before. Added support to the Config Manager to own the 17 Pegasus Home variable and implemented method (getHomedPath) to 18 return absolute paths based from Pegasus Home. 19 20 For more information look in to the following files: 21 pegasus/src/Pegasus/Config/ConfigManager.h 22 pegasus/src/Pegasus/Config/ConfigManager.cpp 23 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.h 24 pegasus/src/Pegasus/Config/FileSystemPropertyOwner.cpp 25 26 4. KS - 18 Feb 02 Add changes to test for and set the NULL value for CIMValues.
27 karl 1.62 This forces new CIMValues to have a NULL attributes that is only 28 reset when a value is "set" or copied into them. the XML and MOF 29 also deliver a NULL value back when the state of the CIMValue is NULL. 30 There is a remaining addition to put an exception on CIMValue gets when 31 the NULL attribute is set that we will install later.
32 karl 1.63
33 kumpf 1.67 5. KS - 19 Feb 2002 Extended testclient slightly and cleaned up numerous bugs.
34 karl 1.62
35 kumpf 1.67 6. KS - 19 Feb 2002 - Add workpaper in doc/workpaper defining the Pegasus Qualifiers.
36 karl 1.64 Note that this version of the paper still needs work. 37
38 kumpf 1.67 7. (Nag Boranna - HP) 20 Feb 2002 - Modified HTTPAcceptor to optionally bind to
39 kumpf 1.65 loopback host. Modified CIMClient to connect to loopback host when connectLocal() 40 method is used. Added a new method lookupPort() in System.h to return the system 41 configured wbem port number. Modified cimuser, cimauth and cimconfig CLI's to use 42 modified CIMClient connectLocal() interface. 43
44 kumpf 1.67 8. (KS- 21 Feb 2002) - Modified Makefile for repository load so located in
45 karl 1.66 schema directory. The one in src/pegasus/compiler/load is deprecated and 46 will be deleted. 47
48 kumpf 1.67 9. KS-21 Feb 2002 - Added new constructor to CIMValue and associated tests 49 50 10. RK-20 Feb 2002 - Add Array reference to CIMValue and added tests
51 karl 1.66
52 kumpf 1.67 11. (Sushma Fernandes - HP, Nag Boranna - HP) 22 Feb 2002 Implemented 53 checks for privileged user when performing authorization. 54 Added a configuration property enableRemotePrivilegedUserAccess. 55 This property needs to be set to true to enable privileged user access 56 for remote clients.
57 karl 1.66
58 kumpf 1.68 12. (Roger Kumpf - HP) 22 Feb 2002 - Added type information to extrinsic 59 method (InvokeMethod) operations. This change involves the addition 60 of PARAMTYPE attributes to PARAMVALUE and RETURNVALUE tags. This tag 61 allows the server to determine the type of a parameter value without 62 having to look up the method definition in the schema. It also allows 63 the client API to do the same for output parameters as well as return 64 values. 65 66 PROVIDER IMPLICATIONS: 67 68 Method providers ARE affected by this change. Previously, all input 69 parameters to invokeMethod were sent to the provider as String type 70 regardless of what the client actually specified or how the method 71 was defined. With this change, providers will now receive input 72 parameters of the type that was actually specified by the client 73 application (regardless of how the method was defined in the schema). 74 75 However, parameters coming from clients other than the Pegasus client 76 API may omit the PARAMTYPE attribute. In this case, the operation 77 processor (currently dispatcher) will find these "typeless" parameters 78 and convert them to the correct type based on the method definition. 79 kumpf 1.68 The result is that if the client specifies the parameter type in the 80 XML encoding (as the Pegasus client API does), the method provider 81 will receive the type specified by the client; if the client does not 82 specify the parameter type, the method provider will see the type 83 specified in the method definition. 84 85 CLIENT IMPLICATIONS: 86 87 Clients ARE affected by this change. Any output parameters that are 88 returned from Pegasus (or other CIM servers using the PARAMTYPE 89 attribute) will now be received by Pegasus clients as the same type 90 sent by the server. Previously, they would have always been of 91 String type. In addition, the return value will be received as the 92 correct type rather than as a String. 93 94 Parameters coming from servers other than Pegasus may omit the 95 PARAMTYPE attribute. In this case, the client will see a 96 CIMParamValue with type==CIMType::NONE, with a CIMValue of type 97 String. Similarly, return values coming from other servers that omit 98 PARAMTYPE will be seen by the client as String type. These return 99 values will NOT have the CIMType::NONE hint that parameters get, 100 kumpf 1.68 because they are CIMValues rather than CIMParamValues. 101 102 This behavior will remain for the forseeable future (through 103 Pegasus version 2), as it is not possible to require that other 104 implementations use the PARAMTYPE attribute. 105 106 SIDE EFFECTS: 107 108 In the process of implementing this functionality, I discovered 109 that there was no way to set a CIMValue to be an array of 110 CIMReferences. This appeared to be an oversight, since method 111 parameters are permitted to be arrays of CIMReferences. I've 112 added the necessary functionality to the CIMValue class. 113 114 I also found that the CIMParamValue class needed significant 115 clean-up, which I completed. 116 117 SETPROPERTY CHANGES: 118 119 A similar problem in SetProperty operations was addressed by 120 "typing" the specified property value in the operation processor 121 kumpf 1.68 (currently dispatcher). This is achieved by looking up the 122 relevant schema to get the property definition, and then converting 123 the specified value to that property's type. 124 125 The SetProperty operation encoding has not changed to accomodate 126 inclusion of type information that would obviate the need for this 127 extra processing. However, clients can avoid this overhead by using 128 ModifyInstance operations (with a property list) instead of SetProperty. 129 130 The GetProperty operation also has NOT been updated with type 131 information. Client applications using the Pegasus client API will 132 always receive String or reference values when calling GetProperty 133 against any server (Pegasus or not). Clients that require properties 134 to be returned as the correct type must use GetInstance (perhaps with 135 a property list) rather than GetProperty. 136 137
138 karl 1.59 -------------------------------------------------------------------
139 karl 1.52 Version 1.06 working towards 1.1 Started 13 December 2001 140 141 1. Merged back to Main branch. All general development will be in main branch 142 in the future with releases in side branches. Special side developments 143 may temporarily be in side branches. 144 Changed cimversion to 1.06. We will do 1.1 based on functionality.
145 karl 1.53 146 2. (Karl) 18 December 2001 - Added new directory repositories where repository 147 implementations will be kept to separate them from the 148 repository interface defintion. Initial implementation is genericfile 149 which is the current file based repository. 150 151 Added new build variable RMREPOSITORY which is a generic MAKE command 152 to remove an existing repository. It simply substitutes for the RMDIRHIER 153 command at this point but we will make this a generic part of system 154 in the future.
155 karl 1.52
156 kumpf 1.54 3. (Roger Kumpf - HP) 18 Dec 2001 - Updated the CIMOperationRequestDecoder 157 to check that all required parameters for intrinsic methods are 158 present. If a required parameter is missing, a CIM_ERR_INVALID_PARAMETER 159 exception is thrown. Also added checks for duplicate parameters in the 160 intrinsic methods. If a parameter is specified more than once, a 161 CIM_ERR_INVALID_PARAMETER exception is thrown. 162
163 kumpf 1.57 4. (Nag Boranna - HP) 14 Jan 2002 - Created CIMOperationRequestAuthorizer queue
164 kumpf 1.55 and moved Authorization verification code from CIMOperationRequestDecoder 165 queue to this new queue. Modified CIMServer.cpp to create 166 CIMOperationRequestAuthorizer queue only when authorization is enabled. 167 Also modified CIMRequestMessagesin CIMMessage.h to include userName to make 168 it available to the CIMOperationRequestDispatcher. 169
170 kumpf 1.57 5. (Mary Hinton - Jan 17, 2002) Fixed the problem with the CIMserver when it
171 mary 1.56 runs as a Windows service. The work thread was exiting instead of running 172 forever. The problem was noticed when the TestClient program and CIMserver 173 service were both running. The service wasn't accessible to the TestClient 174 program. 175
176 kumpf 1.58 6. (Nitin Upasani - Jan 25, 2002) Operations on CIM_IndicationSubscription, 177 CIM_IndicationHandlerCIMXML and CIM_IndicationFilter classes will be now processed 178 in new queue, IndicationService which will get invoked from dispatcher. 179 CIM_CREATE_INSTANCE_REQUEST_MESSAGE 180 CIM_MODIFY_INSTANCE_REQUEST_MESSAGE 181 CIM_DELETE_INSTANCE_REQUEST_MESSAGE 182 CIM_GET_INSTANCE_REQUEST_MESSAGE 183 CIM_ENUMERATE_INSTANCES_REQUEST_MESSAGE 184 CIM_ENUMERATE_INSTANCE_NAMES_REQUEST_MESSAGE 185 186 This new service will also take care of processing the indications on receiving 187 CIM_PROCESS_INDICATION_REQUEST_MESSAGE. This message should come from 188 IndicationProvider or some other mechanism which is not yet clear. 189 190 IndicationService will also receive following messages from PG_ProviderRegistration 191 when a new IndicationProvider will get registered. 192 CIM_NOTIFY_PROVIDER_REGISTRATION_REQUEST_MESSAGE 193 CIM_NOTIFY_PROVIDER_TERMINATION_REQUEST_MESSAGE 194 195 I had also defined new Indication Provider APIs, enableIndication, disableIndication 196 and modifyIndication with more parameters passed and eventually planning to terminate 197 kumpf 1.58 old APIs (provideIndication, cancelIndication and updateIndication). Also there is a 198 plan to implement one more call as startIndication and will be done soon. 199 200 There are three new test programs in IndicationService directory, which will create 201 Filter, Indication and Subscription instances using IndicationService. 202 203 Also modified sample IndicationProvider code with the new APIs introduced.
204 mary 1.56
205 karl 1.52 -------------------------------------------------------------------------
206 karl 1.1
207 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress) 208 current working dev branch of build
209 mike 1.36
210 karl 1.49 --------------------------------------------------------------------------- 211 Version 1.1 - July 2001 Development branch (Work in PRogress) 212
213 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating 214 PARAMETER.REFERENCE constructs for references). 215 216 2. (Mike Brasher) Reworked server communication into new module scheme.
217 mike 1.51 ======= 218 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be 219 seen as part of CGIclient class displays. 220 221 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version 222 to the final version in Schemas\CIM25. This included minor 223 corrections, etc and a couple of file changes. This is the 224 official final CIM 25 schema relesed by the DMTF. This change 225 should not affect any current work. 226 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas 227 directorys. Note however that today the make repository still 228 loads the 2.5 schema. 229 230 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers 231 on XML output. 232 233 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem 234 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp, 235 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable 236 declarations in for loop initializers outside the loop, so multiple 237 "for (int i=0; i<10; i++);" statements cause a compile error. 238 mike 1.51 239 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove 240 dependency on the config files at the start of the cimserver. Now the 241 cimserver will use in-memory default values in the absence of config files 242 and command line options. Fixed a few defects in the config framework that 243 were causing cimom to crash under certain conditions. Changed the config 244 provider class name to 'PG_ConfigSetting' in the mof file and modified 245 provider implementation files accordingly. Also modified the config CLI 246 to show user friendly error/status messages. 247 248 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI 249 (reported incorrect line number on error in XML request if input redirected). 250 Enhanced the -d debug command line option to allow more flexibility in 251 generating debug output. 252 253 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in 254 xml when it generates xml output. 255 256 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into 257 a common file to reduce the number of files required by the default 258 repository implementation. 259 mike 1.51 260 10. (Mike Brasher) - Fixed minor bug in repository implementation. 261 262 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element. 263 264 12. (Mike Brasher) - Committed rework of server into queue approach. 265 266 13. (Mike Brasher) - New webserver and webclient examples. 267 268 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer. 269 270 15. (Mike Brasher) - Initial work on refactorying client into modules. 271 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder. 272 273 16. (Mike Brasher) - queue-based clients now complete. 274 275 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts. 276 277 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS. 278 279 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server 280 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with 281 a web server. See doc/Servlet for more information. 282 283 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files 284 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML 285 input and output can be written in a trace file. 286 287 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support 288 Created new class SignalHandler that allow registration, activation and 289 deactivation of signal handler functions (Linux only !). 290 291 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and 292 ExportClient to support ExportIndication. DisplayConsumer, a sample 293 consumer is added which will consume (by displaying on screen) the 294 indication exported by CIMExportRequestDispatcher. This complete 295 implementation is based on CIM_EXPORT_INDICATION_REQUEST and 296 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files 297 are modified to implement above messages. 298 299 XmlIndicationDispatcher test program is modified to test complete 300 operation. It now creates a consumer, handler and indication 301 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the 302 indication to consumer. This program needs 303 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof 304 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded 305 in the repository to complete the test successfully. This test 306 program also needs Handler qualifier defined in repository and 307 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as 308 below: 309 310 //==================================================================== 311 // CIM_IndicationHandlerXMLHTTP 312 //==================================================================== 313 [Description ( 314 "CIM_IndicationHandlerXMLHTTP describes the destination for " 315 "Indications to be delivered via HTTP, using a cimXML " 316 "representation."), Handler ("CIMxmlIndicationHandler") ] 317 318 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in 319 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading 320 a provider library. 321 322 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod 323 interface for the provider. InvokeMethod currently uses CIMValue as 324 type for inParameters and outParameters, which are unable to give 325 information about param name, type and value. This should be changed 326 to CIMParamValue which will help providers to know details of the 327 parameter name and type along with value passed through InvoleMethod 328 call. Current implementation uses CIMParamValue as parameters while 329 travelling through message queues and converts it back to array of 330 CIMValue before calling Provider API (which needs to be changed 331 later). 332 333 Also added are two test programs: 334 335 src/Pegasus/Common/tests/ParamValue - which demonstrate use of 336 CIMParamValue class. 337 338 src/Pegasus/Client/tests/InvokeMethod - which makes call to 339 InvokeMethod and displays the return value. Current 340 implementation assumes that provider had returned true value 341 and outParameters (which are now hard coded in 342 CIMOperationRequestDispatcher to implement functionality) 343 mike 1.51 which are passed as response of InvokeMethod to client. 344 345 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of 346 authentication to the pegasus code. Created an Authentication Manager 347 and authenticator interfaces. The file based local authentication 348 module has been modified to implement the local authenticator 349 interface, to generate the challenge for the unauthorized requests 350 and to verify the authentication. 351 352 A skeleton program has been created for the Basic Authenticator. 353 This code is in the Security/Authentication directory which is not 354 yet linked into the build. 355 356 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export 357 Decoders. Earlier decoders were sending requests and responses 358 before finishing complete Xml parse. This was prone to send 359 request/response even the Xml is wrong after the MethodCall. 360 New changes collects the Message* as return value from the 361 appropriate functions while parsing the Xml and sends on 362 _outputQueue only when Xml is parsed successfully. 363 364 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to 365 fix the problem with constructing provider name and loading the 366 providers for unix platforms. Also moved the shared library name 367 construction (appending .sl or .so) from 368 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to 369 ProviderModule.cpp and included it in a method that returns 370 provider file path name. 371 372 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication 373 Handler. This handler extracts MappingStrings qualifier from class 374 definition and converts it into SNMP specific trap data. The trap 375 structure is defined in a abstract class in snmpDeliverTrap.h file. 376 Every one has his or her own SNMP agent, which will talk with master 377 agent to deliver the trap or may have some other mechanism. 378 Extending snmpDeliverTrap class and deliverTrap method will help to 379 implement specific trap delivery mechanism. 380 381 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to 382 be NULL. Also, if -u -p specified in the cimconfig, instead of updating 383 property value to be default in the plan file, remove the property from the 384 plan file. Converted ConfigSettingProvider to use provider2 library. 385 mike 1.51 386 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer 387 to allow tracing of a specific number of bytes in a given 388 string. Also modified the XmlIO trace code to use the new interface. 389 Changed the config file defaults for tracing. 390 391 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq 392 NonStop platform (NSK) in directory pegasus/mak. The following files 393 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak, 394 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak, 395 program-unix.mak. The original program.mak which previously covered 396 all platforms was split into platform-specific make files, and now 397 only contains conditionals. Files config.mak, objects.mak, and 398 library.mak were changed to include the NSK files. 399 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak. 400 401 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow 402 commas (,) in the string values of key properties. 403 404 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6 405 406 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in 407 pegasus/mak/program-windows.mak that prevented program builds for 408 the windows platform (related to change from 28 Oct). Replaced 409 leading whitespace in front of commands with tabs as required 410 in make files. 411 412 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25 413 because getting an error in 26 414 415 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys 416 whose types are references. These reference values must be 417 treated specially in the XML encoding, using the VALUE.REFERENCE 418 tag structure. 419 420 Pegasus had been passing reference values simply as String values. 421 For example, EnumerateInstanceNames returned KEYVALUEs of string 422 type rather than VALUE.REFERENCEs. 423 424 I've modified the XmlReader::getKeyBindingElement() and 425 CIMReference::instanceNameToXml() methods to read and write the 426 XML in the proper format. However, making that change required 427 mike 1.51 that a CIMReference object be able to distinguish between a key 428 of String type and a key of reference type. 429 430 I've modified the String format of CIMReferences slightly to 431 allow efficient processing of references whose keys are also of 432 reference type. The "official" form uses the same encoding for 433 key values of String type and of reference type, and so it 434 would be necessary to retrieve the class definition and look up 435 the types of the key properties to determine how to treat the 436 key values. This is clearly too inefficient for internal 437 transformations between CIMReferences and String values. 438 439 The workaround is to encode a 'R' at the beginning of the value 440 for a key of reference type (before the opening '"'). This allows 441 the parser to know a priori whether the key is of String or 442 reference type. 443 444 In this example: 445 446 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10" 447 448 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets 449 the usual encoding. Key2 is a reference property, so the extra 'R' 450 is inserted before its encoded value. Note that this algorithm is 451 recursive, such that RefClass could include KeyC of reference type, 452 which would also get encoded with the 'R' notation. 453 454 The toString() method inserts the 'R' to provide symmetry. A new 455 KeyBinding type (REFERENCE) has been defined to denote keys in a 456 CIMReference that are of reference type. This KeyBinding type must 457 be used appropriately for CIMReference::ttoString() to behave 458 correctly. 459 460 The files that have been modified to make this change are 461 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp. 462 463 A result of this change is that instances names in the instance 464 repository will include this extra 'R' character. Thus, you will 465 need to repopulate your repository when you download the latest 466 CIMOM version. 467 468 Note that for user-facing uses of the String encoding of instance 469 mike 1.51 names (such as might appear in MOF for static association 470 instances or in the CGI client), this solution is non-standard and 471 therefore unacceptable. It is likely that these points will need 472 to process the more expensive operation of retrieving the class 473 definition to determine the key property types. 474 475 36. (Sushma Fernandes - HP) Modified tracer to return invalid components 476 in case of error in setting trace components. Modified the property owner 477 init and update methods. Submitted the pegasus/mak/Buildmakefile with 478 cleanbuild, rebuild and trace configuration options. 479 480 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference 481 (instanceName). 482 483 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of 484 GetProperty/SetProperty/EnumerateInstances request/response messages. 485 Added encoding and decoding of PropertyList parameters on all 486 relevant intrinsic methods. 487 488 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase 489 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp 490 mike 1.51 491 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following 492 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp, 493 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp, 494 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of 495 SystemNsk.cpp) contain stubs. The associated control files 496 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include 497 nsk platform links. 498 499 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue 500 toString() method for CIMValues of String type. The old behavior 501 returned an XML encoding of the String with special characters 502 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b 503 would be returned as a"b. The new behavior just returns the 504 String value directly with no translation. (Note that 505 CIMValue.toXml() may still be used to get the XML-encoded value.) 506 507 This change was necessary in part to correct the behavior of the 508 repository. CreateInstance stores the instance name returned by 509 CIMInstance.getInstanceName(), which is built using calls to 510 CIMValue.toString(). GetInstance searches for the instance name 511 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to 512 be successful, CreateInstance must have stored the instance name 513 in that same form, without special character encoding. 514 515 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to 516 the CIMValue class. Eliminated improper use of CIMValue.toString(), 517 often replacing with CIMValue.get(String&) or CIMValue.toXml(). 518 Also added some error handling in the indication handlers. 519 520 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function 521 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class 522 to handle local instance path and local classpath. Modified the 523 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>. 524 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml. 525 526 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class 527 to hold the argument to ModifyInstance and the return values 528 from EnumerateInstances. The client and provider APIs need to 529 be updated to use this class. 530 531 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line 532 mike 1.51 source files. This CLI allows addition, modification, removal and listing 533 of CIM users. The CLI is not linked to the main makefile as the Provider 534 functionality is yet to be implemented. Added the function 535 String getPassword(char* prompt) to the System.h and cpp files. 536 537 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on 538 the server to challenge the unauthorized requests, authenticate 539 the challenge responses, and verify the subsequent authorized requests. 540 Implemented authentication mechanism on the Client api to send 541 responses to the challenges from the server. Current implementation 542 supports only 'local' authentication mechanism. 543 544 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes: 545 546 - Changed the return value of EnumerateInstances from Array<CIMInstance> 547 to Array<CIMNamedInstance> 548 - Changed the parameter to ModifyInstance from CIMInstance to 549 CIMNamedInstance 550 - Added an optional PropertyList parameter to ModifyInstance 551 - Changed all handling of PropertyList parameters to use the 552 CIMPropertyList class instead of Array<String> 553 mike 1.51 554 Each of these changes was required to comply with the DMTF specification. 555 556 These changes were made throughout the system except for in the provider 557 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the 558 differences from providers, so older providers will continue to function. 559 However, this means that clients can not yet take advantage of the added 560 functionality. 561 562 When the provider API is updated, the following changes will be visible: 563 564 - Providers will get a PropertyList parameter to ModifyInstance which 565 they are required to respect. Providers that can not process the 566 PropertyList must throw a NOT_SUPPORTED exception whenever the 567 list is not null. Clients can take advantage of this change by 568 issuing a ModifyInstance request against a selected set of 569 properties in an instance, rather than being required to replace 570 the entire instance. 571 572 - Providers will be required to return instance names along with 573 instances in the EnumerateInstances method. Clients will receive 574 mike 1.51 these instance names, as the standard dictates. 575 576 - Providers will receive a CIMPropertyList argument containing the 577 PropertyList instead of an Array<String>. This change allows 578 providers to distinguish between an empty list and a null list. 579 580 Note that the repository also does not yet handle the PropertyList in 581 ModifyInstance correctly. 582 583 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance 584 provider API to match the changes made to the EnumerateInstances and 585 ModifyInstance operations. These changes were made to comply with 586 the DMTF specification. 587 588 The original Provider API has not been updated, and I have no 589 plans to do so. Providers written to the original API will 590 continue to function, but they will not have the opportunity 591 to take advantage of the features that have been added. 592 593 The significant changes to the Provider2 API are: 594 595 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which 596 they are required to respect. Providers that can not process the 597 PropertyList must throw a NOT_SUPPORTED exception whenever the 598 list is not null. Clients can take advantage of this change by 599 issuing a ModifyInstance request against a selected set of 600 properties in an instance, rather than being required to replace 601 the entire instance. 602 603 - Providers will get an IncludeQualifiers parameter to ModifyInstance 604 which they are required to respect. If IncludeQualifiers is 605 false, the qualifiers on the modified instance provided must not 606 be used to update the instance. 607 608 - Providers will be required to return instance names along with 609 instances in the EnumerateInstances method. Clients will receive 610 these instance names, as the standard dictates. 611 612 The providers that are in the Pegasus build have all been updated. 613 However, whenever the PropertyList is not null, the providers throw 614 a NOT_SUPPORTED exception. 615 616 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform, 617 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to 618 the Common module. File Config.h was modified to include the NSK 619 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation 620 without the standard (std) namespace. 621 622 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration 623 properties to support alternate behavior of the Pegasus repository: 624 repositoryIsDefaultInstanceProvider and repositoryProviderName. 625 626 Using the first one, the repository can be enabled/disabled as the 627 default provider for instance (and association) operations. The default 628 setting is "true", so the default behavior has not been changed. To 629 disable the repository as the default instance provider, issue the 630 following command before starting cimserver: 631 632 cimconfig -s repositoryIsDefaultInstanceProvider=false -p 633 634 The repositoryProviderName configuration property specifies what 635 provider name is used to explicitly register the repository as a 636 provider. This is necessary when the repository needs to serve 637 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set 638 to "false". The default value is "repository". To register the 639 repository as an instance provider for a class, add a 640 'Provider("repository")' qualifier to the class definition. 641 642 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to 643 pass to providers that act as services. This handle provides 644 service providers with access to the CIMServer data structures. 645 646 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in 647 the repository so that it respects the IncludeQualifiers and 648 PropertyList parameters. Updated SetProperty in the repository 649 so that it uses ModifyInstance correctly. The repository now 650 supports GetProperty and SetProperty in addition to ModifyInstance. 651 652 Implemented GetProperty and SetProperty in the Dispatcher and 653 Provider2 so that they get translated to GetInstance and 654 ModifyInstance calls (respectively) in the provider. Providers 655 written to the Provider2 API that correctly process the new 656 ModifyInstance parameters will automatically support SetProperty 657 operations. Note that GetProperty and SetProperty currently only 658 mike 1.51 work for String properties because of an XML encoding limitation. 659 660 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the 661 Security components for authentication and authorization. 662 663 Authentication and User Management: 664 cimuser CLI : This CLI is used for addition, modification, removal 665 and listing of CIM Users. The CIM user password is encrypted and stored 666 in a file. The password file format is compatible with Apache's htpasswd 667 generated password file. 668 669 cimauth CLI implement the authorization managment functionality by letting 670 to add/remove/list user authorizations. 671 672 User Manager and User Manager Provider components implement the user 673 management and authorization functionality. 674 675 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory 676 under src/Pegasus/WQL which contains library and BNF. 677 678 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider 679 mike 1.51 which does provider registration, block, unblock, and stop a provider. 680 It also alert Subscription Service of any provider registration changes. 681 682 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h 683 and String.cpp with PEG_min. The _min macro caused problems on the 684 NSK platform because of a duplicate definition in a standard file. 685 686 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication 687 subscription service provider that serves as the instance provider for the 688 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler 689 classes (from CIM_Events27.mof). The service also takes appropriate action 690 in response to startup, shutdown of the cimom, termination of a provider, 691 or change in provider registration. 692 693 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service 694 and the command line interface for shutting down cimom gracefully. 695 For more information, refer to the CIMOM Shutdown working paper 696 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf. 697 698 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only). 699 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined 700 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional 701 constructor to set a pointer to the server-, resp. client wide SSL_Context 702 structure. The Socket field in HTTPConnection is substituted with an 703 MP_Socket pointer, a class that is designed to hide the differences 704 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class 705 is defined even in a non-ssl environment. 706 How to use it in a Server or Client: 707 1. Just create an SSL_Context once per Server/Client address space 708 2. Construct every HTTPConnector/Acceptor with a pointer to this 709 SSL_Context if you want to enable SSL; construct Connectors/Acceptors 710 without SSL_Context for conventional connections.
711 mike 1.50
712 mike 1.51 The Configuration data was extended with the boolean SSL property, and 713 cimserver and TestClient now understand the -SSL, resp. -ssl flag. 714 715 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
716 kumpf 1.61
717 mike 1.51 --------------------------------------------------------------------------- 718 Version 1.1 - July 2001 Development branch 719 Tagged as version_1_01 on 3 August 2001 (sorry should have been 720 1.1 721 722 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver 723 indication by defining IndicationDispatcher, HandlerTable, CIMHandler 724 and ExportClient classes. the indication. 725 726 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to 727 make the delivery of indications over Xml-HTTP and email respectively. 728 729 Provided examples for HandlerTable, XmlIndicationDelivery and 730 SendMailIndicationDelivery to support this implementation. 731 732 2. (Markus Mueller - IBM) Implementation of a Linux specific threading 733 library and a thread-safe message queue (first stage). Classes defined 734 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler 735 and SimpleThread. 736 737 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer 738 mike 1.51 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more 739 information on using wbemexec. A simple test script is included. Please 740 see pegasus/src/Clients/wbemexec/tests/readme for information on running 741 the test script. 742 743 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please 744 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf 745 and 746 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using 747 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and 748 src/Pegasus/Common/TraceFileHandler.cpp. 749 750 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and 751 Config CLI. Please refer to the documentation 752 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page 753 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on 754 using the config framework and cimconfig CLI. Make sure to load the config 755 mof (src/gmake config) before starting the cimserver. A simple test script 756 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for 757 information on running the test script. 758 759 mike 1.51 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects 760 (changed the H and CPP files for the major CIM objects. These 761 functions generate CIM MOF output for the objects. 762 763 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local 764 Authentication provides security mechanism to authenticates CIM clients 765 that 766 connect to CIM Server on the same system without having to specify a 767 password. 768 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design. 769 This component only works on unix and it's not linked in with the main 770 build. 771 When authentication framework is defined this component may need to be 772 modified to integrate with the framework.
773 karl 1.49 774 --------------------------------------------------------------------------- 775 Version 0.99.x (Fixes to version 0.99) in Process
776 mike 1.51
777 karl 1.49 NOTE: Please do not input anything to this branch except for critical 778 fixes. This is, in effect, 1.0 and we do not want to use it for 779 development. 780 781 ---------------------------------------------------------------------------- 782 783 Version 0.98.0 - Work in progress (This number skipped)
784 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
785 mike 1.36
786 karl 1.38 1. (Mike Brasher) Added support for class association operations
787 mike 1.37 (references(), associators(), referenceNames(), associatorNames()). 788
789 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes 790 in the HTML URL reference for passing instance names. 791
792 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes. 793 794 4. (Mike Brasher) Added CIM Message types in preparation for qeueing. 795
796 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to 797 allow slp to compile. 798
799 mike 1.42 4. (Mike Brasher) - Finalized CIM messages. 800 801 5. (Mike Brasher) - Added queue ids concept (using hash table which maps 802 ids to queue pointers). 803
804 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler 805 and Dispatcher. 806
807 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher 808 and 809 CIMProvider to support both interfaces. Added CIMOMHandle and sample
810 chip 1.44 ResponseHandler for Provider2 interface.
811 mike 1.45 812 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher. 813 814 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based. 815
816 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer. 817
818 mike 1.47 11. (Mike Brasher) - Ported to TRU64. 819 820 12. (Mike Brasher) - Fixed compiler error on Linux. 821
822 karl 1.38 ------------------------------------------------------------------------------ 823 --
824 mike 1.26
825 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
826 karl 1.16 827 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe 828 for NT and Linux platforms.
829 mike 1.26
830 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to 831 5988. 832 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by 833 the DMTF.
834 mike 1.26
835 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF 836 Fusion event. THis included a) extended the test for end of HTTP header from 837 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b). 838 Extended the HTTP message ID to allow for non-numeric message IDs.
839 mike 1.26
840 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp 841 and created RepositoryDeclContext.{cpp,h}. This is the first step in 842 revamping the compiler to work independently of the repository (grb).
843 mike 1.26
844 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified 845 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp. 846 Now when you build normally, you will get the committed grammar and parser 847 files instead of generating your own for a particular platform. This should 848 prevent back-level lex and yacc implementations from generating troublesome 849 code. The committed files are generated from flex 2.5.4 and bison 1,28.
850 bob 1.20 (grb)
851 mike 1.26
852 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes. 853 This change paves the way for upcoming changes that will allow the compiler 854 to work indepently of the repository. (grb)
855 mike 1.26
856 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
857 mike 1.26
858 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance, 859 modifyClass,
860 chip 1.22 createClass to protect caller's object.
861 mike 1.26
862 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2 863 directory. These 864 interfaces allow very smart providers to perform advances operations. 865 CIMProviderStub has
866 chip 1.23 been updated to support the new interfaces. Needs testing.
867 mike 1.26
868 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
869 mike 1.26
870 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild 871 repository you make world, make rebuild or make repository. ks
872 mike 1.26 873 12. Added associators() and associatorNames() operations to CIM repository.
874 mike 1.27 (MEB) 875 876 13. More on association implementation (all four operations supported). 877 Need to handle deletion of associations and protocol stubs still. 878 Need to test class associations (rather than just instance associations). 879 Need to handle deleteInstance(). 880 (MEB)
881 mike 1.26
882 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD) 883
884 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install 885 AssociationName
886 karl 1.29 and ReferenceName functions. This included extensive update to the HTML 887 pages. 888
889 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
890 sage 1.31 891 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed 892 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB). 893 Made cimserver accept the -D flag to eliminate the need for environment 894 variables.
895 mike 1.32 896 18. (Mike Brasher) Added support for Associators(), AssociatorNames(), 897 References() and ReferenceNames() CIM operations. These only operate 898 on instances at this time. They will operate on classes soon.
899 kumpf 1.34 900 19. (Mike Glantz) Extended and modified dynamic support 901 changes to (1) work on HP-UX and (2) have all images and libraries 902 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest 903 change is to program.mak and library-unix.mak, removing specific 904 lists of dynamic library specs and putting them in the Makefile 905 and libraries.mak files that build the actual targets (lots of 906 these now have DYNAMIC_LIBRARIES defined).
907 karl 1.35 908 20. (Karl) added basic Queue function to common (based on array) and added 909 tests for stack and queue.
910 karl 1.38 911 ------------------------------------------------------------------------------ 912 --
913 mike 1.36
914 karl 1.16 Version 0.97.3 - Released 5 June 2001
915 karl 1.11
916 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H), 917 CIMServer (both)
918 karl 1.11 Functions added include: 919 a. Enable trace to log file.
920 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l 921 is
922 karl 1.11 trace to log, -t is trace to console). 923 c. add parameter in optionsrow for help message and enable the capture
924 karl 1.12 of these messages in Options class. Also added help print that 925 prints these things out. However, format not to beautiful.
926 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider. 927 e. Extend the Clients\testclient so he does tests on Namespace.
928 karl 1.15 2. (KS)Extended Log to show time, severity.
929 mike 1.33
930 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
931 mike 1.33
932 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where 933 logs
934 karl 1.12 are put
935 mike 1.33
936 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server. 937 This is a preliminary version.
938 mike 1.33
939 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
940 karl 1.13 throws CannotBind exception.
941 mike 1.33
942 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may 943 not
944 karl 1.14 print out all of the message. At the least it prints out the error message 945 and components of the message causing the problem.
946 mike 1.33
947 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
948 mike 1.33
949 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
950 karl 1.14 existed.
951 mike 1.33 952 10. (Mike Brasher) Added "Test" prefix to all test program names.
953 karl 1.15
954 karl 1.29 ------------------------------------------------------------------------------ 955 --
956 karl 1.6 Version 0.97.2 957 958 1. Extend HP UX port to correctly load Dynamic Load Libraries. 959 2. Extend Formatter for Boolean and Uint32 types. 960 3. Change CIM Server to use Trace (-t) flag. This also changed 961 Handler.h to work off of flag. 962 4. Minor corrections to __Namespace Provider. 963 5. Extend tests for Formatter, String, and other modules. 964 6. Correct errors in documentation. 965 7. New working papers (provider interface).
966 karl 1.8 8. Add Providerreg.exe tool. 967 9. Add trace output for messages sent from the Server.
968 mike 1.26
969 karl 1.29 ------------------------------------------------------------------------------ 970 --
971 mike 1.26
972 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
973 karl 1.5
974 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object 975 find functions. Note: This symbol is defined in config.h. (ks). 976
977 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area 978 of dynamic lib loaading.
979 karl 1.1 980
981 karl 1.29 ------------------------------------------------------------------------------ 982 --
983 mike 1.26
984 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
985 karl 1.1 986 1. Added methods in CIMClass, CIMInstance, for existance of properties, 987 qualifiers, methods. 988 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier, 989 methods. 990 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of 991 qualifiers and to 992 remove qualifiers. 993 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX 994 compiler. It probably imposed more limitations than would be required with
995 karl 1.2 the current compiler. This version of the port produces an excessively large 996 common module due to template bloat. That problem will be fixed in a future 997 change to the port. Also there are a log of duplicate symbol warnings generate 998 by the AIC compiler but these cause no problems. The port has been tested 999 with the complete unit test and client/server test successfully.
1000 karl 1.1 1001 --------------------------------------------------------------------------
1002 karl 1.2
1003 mike 1.4 23 May 2001
1004 karl 1.1
1005 mike 1.9 1. Ported to HPUX
1006 karl 1.5
1007 mike 1.9 -------------------------------------------------------------------------- 1008 1009 29 May 2001 1010 1011 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
1012 mike 1.51 1013 1014 1015
1016 karl 1.48
1017 karl 1.38
1018 karl 1.30
1019 karl 1.29
1020 mike 1.10

No CVS admin address has been configured