1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 mike 1.51 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49 ---------------------------------------------------------------------------
7 Version 1.1 - July 2001 Development branch (Work in PRogress)
8
|
9 mike 1.50 1. (Mike Brasher) Fixed bug with XML generation (was not generating
10 PARAMETER.REFERENCE constructs for references).
11
12 2. (Mike Brasher) Reworked server communication into new module scheme.
|
13 mike 1.51 =======
14 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
15 seen as part of CGIclient class displays.
16
17 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
18 to the final version in Schemas\CIM25. This included minor
19 corrections, etc and a couple of file changes. This is the
20 official final CIM 25 schema relesed by the DMTF. This change
21 should not affect any current work.
22 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
23 directorys. Note however that today the make repository still
24 loads the 2.5 schema.
25
26 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
27 on XML output.
28
29 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
30 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
31 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
32 declarations in for loop initializers outside the loop, so multiple
33 "for (int i=0; i<10; i++);" statements cause a compile error.
34 mike 1.51
35 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
36 dependency on the config files at the start of the cimserver. Now the
37 cimserver will use in-memory default values in the absence of config files
38 and command line options. Fixed a few defects in the config framework that
39 were causing cimom to crash under certain conditions. Changed the config
40 provider class name to 'PG_ConfigSetting' in the mof file and modified
41 provider implementation files accordingly. Also modified the config CLI
42 to show user friendly error/status messages.
43
44 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
45 (reported incorrect line number on error in XML request if input redirected).
46 Enhanced the -d debug command line option to allow more flexibility in
47 generating debug output.
48
49 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
50 xml when it generates xml output.
51
52 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
53 a common file to reduce the number of files required by the default
54 repository implementation.
55 mike 1.51
56 10. (Mike Brasher) - Fixed minor bug in repository implementation.
57
58 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
59
60 12. (Mike Brasher) - Committed rework of server into queue approach.
61
62 13. (Mike Brasher) - New webserver and webclient examples.
63
64 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
65
66 15. (Mike Brasher) - Initial work on refactorying client into modules.
67 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
68
69 16. (Mike Brasher) - queue-based clients now complete.
70
71 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
72
73 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
74
75 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
76 mike 1.51 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
77 a web server. See doc/Servlet for more information.
78
79 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
80 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
81 input and output can be written in a trace file.
82
83 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
84 Created new class SignalHandler that allow registration, activation and
85 deactivation of signal handler functions (Linux only !).
86
87 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
88 ExportClient to support ExportIndication. DisplayConsumer, a sample
89 consumer is added which will consume (by displaying on screen) the
90 indication exported by CIMExportRequestDispatcher. This complete
91 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
92 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
93 are modified to implement above messages.
94
95 XmlIndicationDispatcher test program is modified to test complete
96 operation. It now creates a consumer, handler and indication
97 mike 1.51 instance and then calls CIMExportRequestDispatcher to export the
98 indication to consumer. This program needs
99 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
100 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
101 in the repository to complete the test successfully. This test
102 program also needs Handler qualifier defined in repository and
103 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
104 below:
105
106 //====================================================================
107 // CIM_IndicationHandlerXMLHTTP
108 //====================================================================
109 [Description (
110 "CIM_IndicationHandlerXMLHTTP describes the destination for "
111 "Indications to be delivered via HTTP, using a cimXML "
112 "representation."), Handler ("CIMxmlIndicationHandler") ]
113
114 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
115 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
116 a provider library.
117
118 mike 1.51 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
119 interface for the provider. InvokeMethod currently uses CIMValue as
120 type for inParameters and outParameters, which are unable to give
121 information about param name, type and value. This should be changed
122 to CIMParamValue which will help providers to know details of the
123 parameter name and type along with value passed through InvoleMethod
124 call. Current implementation uses CIMParamValue as parameters while
125 travelling through message queues and converts it back to array of
126 CIMValue before calling Provider API (which needs to be changed
127 later).
128
129 Also added are two test programs:
130
131 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
132 CIMParamValue class.
133
134 src/Pegasus/Client/tests/InvokeMethod - which makes call to
135 InvokeMethod and displays the return value. Current
136 implementation assumes that provider had returned true value
137 and outParameters (which are now hard coded in
138 CIMOperationRequestDispatcher to implement functionality)
139 mike 1.51 which are passed as response of InvokeMethod to client.
140
141 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
142 authentication to the pegasus code. Created an Authentication Manager
143 and authenticator interfaces. The file based local authentication
144 module has been modified to implement the local authenticator
145 interface, to generate the challenge for the unauthorized requests
146 and to verify the authentication.
147
148 A skeleton program has been created for the Basic Authenticator.
149 This code is in the Security/Authentication directory which is not
150 yet linked into the build.
151
152 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
153 Decoders. Earlier decoders were sending requests and responses
154 before finishing complete Xml parse. This was prone to send
155 request/response even the Xml is wrong after the MethodCall.
156 New changes collects the Message* as return value from the
157 appropriate functions while parsing the Xml and sends on
158 _outputQueue only when Xml is parsed successfully.
159
160 mike 1.51 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
161 fix the problem with constructing provider name and loading the
162 providers for unix platforms. Also moved the shared library name
163 construction (appending .sl or .so) from
164 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
165 ProviderModule.cpp and included it in a method that returns
166 provider file path name.
167
168 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
169 Handler. This handler extracts MappingStrings qualifier from class
170 definition and converts it into SNMP specific trap data. The trap
171 structure is defined in a abstract class in snmpDeliverTrap.h file.
172 Every one has his or her own SNMP agent, which will talk with master
173 agent to deliver the trap or may have some other mechanism.
174 Extending snmpDeliverTrap class and deliverTrap method will help to
175 implement specific trap delivery mechanism.
176
177 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
178 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
179 property value to be default in the plan file, remove the property from the
180 plan file. Converted ConfigSettingProvider to use provider2 library.
181 mike 1.51
182 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
183 to allow tracing of a specific number of bytes in a given
184 string. Also modified the XmlIO trace code to use the new interface.
185 Changed the config file defaults for tracing.
186
187 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
188 NonStop platform (NSK) in directory pegasus/mak. The following files
189 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
190 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
191 program-unix.mak. The original program.mak which previously covered
192 all platforms was split into platform-specific make files, and now
193 only contains conditionals. Files config.mak, objects.mak, and
194 library.mak were changed to include the NSK files.
195 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
196
197 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
198 commas (,) in the string values of key properties.
199
200 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
201
202 mike 1.51 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
203 pegasus/mak/program-windows.mak that prevented program builds for
204 the windows platform (related to change from 28 Oct). Replaced
205 leading whitespace in front of commands with tabs as required
206 in make files.
207
208 35. (K Schopmeyer) 2 Nov 2001 - Temporarily moved repository back to CIM25
209 because getting an error in 26
210
211 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
212 whose types are references. These reference values must be
213 treated specially in the XML encoding, using the VALUE.REFERENCE
214 tag structure.
215
216 Pegasus had been passing reference values simply as String values.
217 For example, EnumerateInstanceNames returned KEYVALUEs of string
218 type rather than VALUE.REFERENCEs.
219
220 I've modified the XmlReader::getKeyBindingElement() and
221 CIMReference::instanceNameToXml() methods to read and write the
222 XML in the proper format. However, making that change required
223 mike 1.51 that a CIMReference object be able to distinguish between a key
224 of String type and a key of reference type.
225
226 I've modified the String format of CIMReferences slightly to
227 allow efficient processing of references whose keys are also of
228 reference type. The "official" form uses the same encoding for
229 key values of String type and of reference type, and so it
230 would be necessary to retrieve the class definition and look up
231 the types of the key properties to determine how to treat the
232 key values. This is clearly too inefficient for internal
233 transformations between CIMReferences and String values.
234
235 The workaround is to encode a 'R' at the beginning of the value
236 for a key of reference type (before the opening '"'). This allows
237 the parser to know a priori whether the key is of String or
238 reference type.
239
240 In this example:
241
242 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
243
244 mike 1.51 Property Key1 of class MyClass is of String type, and so it gets
245 the usual encoding. Key2 is a reference property, so the extra 'R'
246 is inserted before its encoded value. Note that this algorithm is
247 recursive, such that RefClass could include KeyC of reference type,
248 which would also get encoded with the 'R' notation.
249
250 The toString() method inserts the 'R' to provide symmetry. A new
251 KeyBinding type (REFERENCE) has been defined to denote keys in a
252 CIMReference that are of reference type. This KeyBinding type must
253 be used appropriately for CIMReference::ttoString() to behave
254 correctly.
255
256 The files that have been modified to make this change are
257 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
258
259 A result of this change is that instances names in the instance
260 repository will include this extra 'R' character. Thus, you will
261 need to repopulate your repository when you download the latest
262 CIMOM version.
263
264 Note that for user-facing uses of the String encoding of instance
265 mike 1.51 names (such as might appear in MOF for static association
266 instances or in the CGI client), this solution is non-standard and
267 therefore unacceptable. It is likely that these points will need
268 to process the more expensive operation of retrieving the class
269 definition to determine the key property types.
270
271 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
272 in case of error in setting trace components. Modified the property owner
273 init and update methods. Submitted the pegasus/mak/Buildmakefile with
274 cleanbuild, rebuild and trace configuration options.
275
276 37. (Yi Zhou - HP) 05 Nov 2001 - Fixed createInstance to return a CIMReference
277 (instanceName).
278
279 38. (Roger Kumpf - HP) 08 Nov 2001 - Implemented encoding/decoding of
280 GetProperty/SetProperty/EnumerateInstances request/response messages.
281 Added encoding and decoding of PropertyList parameters on all
282 relevant intrinsic methods.
283
284 39. (Markus Mueller - IBM) 09 Nov 2001 - Added Associator calls to CIMBase
285 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
286 mike 1.51
287 40. (Rudy Schuet - Compaq) 12 Nov 2001 - Common module: added the following
288 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
289 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
290 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
291 SystemNsk.cpp) contain stubs. The associated control files
292 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
293 nsk platform links.
294
295 41. (Roger Kumpf - HP) 14 Nov 2001 - Changed the behavior of the CIMValue
296 toString() method for CIMValues of String type. The old behavior
297 returned an XML encoding of the String with special characters
298 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
299 would be returned as a"b. The new behavior just returns the
300 String value directly with no translation. (Note that
301 CIMValue.toXml() may still be used to get the XML-encoded value.)
302
303 This change was necessary in part to correct the behavior of the
304 repository. CreateInstance stores the instance name returned by
305 CIMInstance.getInstanceName(), which is built using calls to
306 CIMValue.toString(). GetInstance searches for the instance name
307 mike 1.51 without UTF-8 encoding of special characters. For GetInstance to
308 be successful, CreateInstance must have stored the instance name
309 in that same form, without special character encoding.
310
311 42. (Roger Kumpf - HP) 15 Nov 2001 - Added a toXml(void) method to
312 the CIMValue class. Eliminated improper use of CIMValue.toString(),
313 often replacing with CIMValue.get(String&) or CIMValue.toXml().
314 Also added some error handling in the indication handlers.
315
316 43. (Sushma Fernandes - HP) 16 Nov 2001 - Added a function
317 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
318 to handle local instance path and local classpath. Modified the
319 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
320 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
321
322 44. (Roger Kumpf - HP) 19 Nov 2001 - Added a CIMNamedInstance class
323 to hold the argument to ModifyInstance and the return values
324 from EnumerateInstances. The client and provider APIs need to
325 be updated to use this class.
326
327 45. (Sushma Fernandes - HP) 19 Nov 2001 - Added the cimuser command line
328 mike 1.51 source files. This CLI allows addition, modification, removal and listing
329 of CIM users. The CLI is not linked to the main makefile as the Provider
330 functionality is yet to be implemented. Added the function
331 String getPassword(char* prompt) to the System.h and cpp files.
332
333 46. (Nag Boranna - HP) 20 Nov 2001 - Implemented Authentication code on
334 the server to challenge the unauthorized requests, authenticate
335 the challenge responses, and verify the subsequent authorized requests.
336 Implemented authentication mechanism on the Client api to send
337 responses to the challenges from the server. Current implementation
338 supports only 'local' authentication mechanism.
339
340 47. (Roger Kumpf - HP) 20 Nov 2001 - Commited the following set of changes:
341
342 - Changed the return value of EnumerateInstances from Array<CIMInstance>
343 to Array<CIMNamedInstance>
344 - Changed the parameter to ModifyInstance from CIMInstance to
345 CIMNamedInstance
346 - Added an optional PropertyList parameter to ModifyInstance
347 - Changed all handling of PropertyList parameters to use the
348 CIMPropertyList class instead of Array<String>
349 mike 1.51
350 Each of these changes was required to comply with the DMTF specification.
351
352 These changes were made throughout the system except for in the provider
353 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
354 differences from providers, so older providers will continue to function.
355 However, this means that clients can not yet take advantage of the added
356 functionality.
357
358 When the provider API is updated, the following changes will be visible:
359
360 - Providers will get a PropertyList parameter to ModifyInstance which
361 they are required to respect. Providers that can not process the
362 PropertyList must throw a NOT_SUPPORTED exception whenever the
363 list is not null. Clients can take advantage of this change by
364 issuing a ModifyInstance request against a selected set of
365 properties in an instance, rather than being required to replace
366 the entire instance.
367
368 - Providers will be required to return instance names along with
369 instances in the EnumerateInstances method. Clients will receive
370 mike 1.51 these instance names, as the standard dictates.
371
372 - Providers will receive a CIMPropertyList argument containing the
373 PropertyList instead of an Array<String>. This change allows
374 providers to distinguish between an empty list and a null list.
375
376 Note that the repository also does not yet handle the PropertyList in
377 ModifyInstance correctly.
378
379 48. (Roger Kumpf - HP) 21 Nov 2001 - I have updated the Provider2 instance
380 provider API to match the changes made to the EnumerateInstances and
381 ModifyInstance operations. These changes were made to comply with
382 the DMTF specification.
383
384 The original Provider API has not been updated, and I have no
385 plans to do so. Providers written to the original API will
386 continue to function, but they will not have the opportunity
387 to take advantage of the features that have been added.
388
389 The significant changes to the Provider2 API are:
390
391 mike 1.51 - Providers will get a PropertyList parameter to ModifyInstance which
392 they are required to respect. Providers that can not process the
393 PropertyList must throw a NOT_SUPPORTED exception whenever the
394 list is not null. Clients can take advantage of this change by
395 issuing a ModifyInstance request against a selected set of
396 properties in an instance, rather than being required to replace
397 the entire instance.
398
399 - Providers will get an IncludeQualifiers parameter to ModifyInstance
400 which they are required to respect. If IncludeQualifiers is
401 false, the qualifiers on the modified instance provided must not
402 be used to update the instance.
403
404 - Providers will be required to return instance names along with
405 instances in the EnumerateInstances method. Clients will receive
406 these instance names, as the standard dictates.
407
408 The providers that are in the Pegasus build have all been updated.
409 However, whenever the PropertyList is not null, the providers throw
410 a NOT_SUPPORTED exception.
411
412 mike 1.51 49. (Rudy Schuet - Compaq) 25 NOV 2001 - To support the NSK platform,
413 files Platform_NSK_NONSTOP_NMCPLUS.h and ConfigNsk.h were added to
414 the Common module. File Config.h was modified to include the NSK
415 platform and a new option PEGASUS_HAVE_NO_STD that allows compilation
416 without the standard (std) namespace.
417
418 50. (Roger Kumpf - HP) 26 Nov 2001 - Added two new configuration
419 properties to support alternate behavior of the Pegasus repository:
420 repositoryIsDefaultInstanceProvider and repositoryProviderName.
421
422 Using the first one, the repository can be enabled/disabled as the
423 default provider for instance (and association) operations. The default
424 setting is "true", so the default behavior has not been changed. To
425 disable the repository as the default instance provider, issue the
426 following command before starting cimserver:
427
428 cimconfig -s repositoryIsDefaultInstanceProvider=false -p
429
430 The repositoryProviderName configuration property specifies what
431 provider name is used to explicitly register the repository as a
432 provider. This is necessary when the repository needs to serve
433 mike 1.51 instances of a class and repositoryIsDefaultInstanceProvider is set
434 to "false". The default value is "repository". To register the
435 repository as an instance provider for a class, add a
436 'Provider("repository")' qualifier to the class definition.
437
438 51. (Roger Kumpf - HP) 26 Nov 2001 - Added a new ServiceCIMOMHandle to
439 pass to providers that act as services. This handle provides
440 service providers with access to the CIMServer data structures.
441
442 52. (Roger Kumpf - HP) 28 Nov 2001 - Implemented ModifyInstance in
443 the repository so that it respects the IncludeQualifiers and
444 PropertyList parameters. Updated SetProperty in the repository
445 so that it uses ModifyInstance correctly. The repository now
446 supports GetProperty and SetProperty in addition to ModifyInstance.
447
448 Implemented GetProperty and SetProperty in the Dispatcher and
449 Provider2 so that they get translated to GetInstance and
450 ModifyInstance calls (respectively) in the provider. Providers
451 written to the Provider2 API that correctly process the new
452 ModifyInstance parameters will automatically support SetProperty
453 operations. Note that GetProperty and SetProperty currently only
454 mike 1.51 work for String properties because of an XML encoding limitation.
455
456 53. (Nag Boranna - HP, Sushma Fernandes - HP) 30 Nov 2001 - Implemented the
457 Security components for authentication and authorization.
458
459 Authentication and User Management:
460 cimuser CLI : This CLI is used for addition, modification, removal
461 and listing of CIM Users. The CIM user password is encrypted and stored
462 in a file. The password file format is compatible with Apache's htpasswd
463 generated password file.
464
465 cimauth CLI implement the authorization managment functionality by letting
466 to add/remove/list user authorizations.
467
468 User Manager and User Manager Provider components implement the user
469 management and authorization functionality.
470
471 54. (Mike Brasher - BMC) 3 Dec 2001 - Added support for WQL-1. New directory
472 under src/Pegasus/WQL which contains library and BNF.
473
474 55. (Yi Zhou - HP) 03 Dec 2001 - Implemented Pegasus registration provider
475 mike 1.51 which does provider registration, block, unblock, and stop a provider.
476 It also alert Subscription Service of any provider registration changes.
477
478 56. (Rudy Schuet - Compaq) 04 Dec 2001 - Replaced _min macro in String.h
479 and String.cpp with PEG_min. The _min macro caused problems on the
480 NSK platform because of a duplicate definition in a standard file.
481
482 57. (Carol Ann Krug Graves - HP) 04 Dec 2001 - Implemented Pegasus indication
483 subscription service provider that serves as the instance provider for the
484 CIM_IndicationSubscription, CIM_IndicationFilter and CIM_IndicationHandler
485 classes (from CIM_Events27.mof). The service also takes appropriate action
486 in response to startup, shutdown of the cimom, termination of a provider,
487 or change in provider registration.
488
489 58. (Jenny Yu - HP) 05 Dec 2001 - Implemented Pegasus Shutdown Service
490 and the command line interface for shutting down cimom gracefully.
491 For more information, refer to the CIMOM Shutdown working paper
492 in pegasus/doc/WorkPapers/CIMOMShutdown.pdf.
493
494 59. (Markus Mueller - IBM) 06 Dec 2001 - Implemented SSL support (Linux only).
495 It consists the new classes SSL_Context, SSLSocket and MP_Socket defined
496 mike 1.51 in TLS.h. HTTPAcceptor and HTTPConnector are extended with an additional
497 constructor to set a pointer to the server-, resp. client wide SSL_Context
498 structure. The Socket field in HTTPConnection is substituted with an
499 MP_Socket pointer, a class that is designed to hide the differences
500 between Socket and SSLSocket. The MP_Socket (multipurpose socket) class
501 is defined even in a non-ssl environment.
502 How to use it in a Server or Client:
503 1. Just create an SSL_Context once per Server/Client address space
504 2. Construct every HTTPConnector/Acceptor with a pointer to this
505 SSL_Context if you want to enable SSL; construct Connectors/Acceptors
506 without SSL_Context for conventional connections.
|
507 mike 1.50
|
508 mike 1.51 The Configuration data was extended with the boolean SSL property, and
509 cimserver and TestClient now understand the -SSL, resp. -ssl flag.
510
511 60. (Bapu Patil - HP) Updated makefiles to support HP-UX IA64 bits O.S.
512
513 ---------------------------------------------------------------------------
514 Version 1.1 - July 2001 Development branch
515 Tagged as version_1_01 on 3 August 2001 (sorry should have been
516 1.1
517
518 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
519 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
520 and ExportClient classes. the indication.
521
522 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
523 make the delivery of indications over Xml-HTTP and email respectively.
524
525 Provided examples for HandlerTable, XmlIndicationDelivery and
526 SendMailIndicationDelivery to support this implementation.
527
528 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
529 mike 1.51 library and a thread-safe message queue (first stage). Classes defined
530 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
531 and SimpleThread.
532
533 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
534 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
535 information on using wbemexec. A simple test script is included. Please
536 see pegasus/src/Clients/wbemexec/tests/readme for information on running
537 the test script.
538
539 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
540 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
541 and
542 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
543 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
544 src/Pegasus/Common/TraceFileHandler.cpp.
545
546 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
547 Config CLI. Please refer to the documentation
548 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
549 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
550 mike 1.51 using the config framework and cimconfig CLI. Make sure to load the config
551 mof (src/gmake config) before starting the cimserver. A simple test script
552 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
553 information on running the test script.
554
555 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
556 (changed the H and CPP files for the major CIM objects. These
557 functions generate CIM MOF output for the objects.
558
559 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
560 Authentication provides security mechanism to authenticates CIM clients
561 that
562 connect to CIM Server on the same system without having to specify a
563 password.
564 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
565 This component only works on unix and it's not linked in with the main
566 build.
567 When authentication framework is defined this component may need to be
568 modified to integrate with the framework.
|
569 karl 1.49
570 ---------------------------------------------------------------------------
571 Version 0.99.x (Fixes to version 0.99) in Process
|
572 mike 1.51
|
573 karl 1.49 NOTE: Please do not input anything to this branch except for critical
574 fixes. This is, in effect, 1.0 and we do not want to use it for
575 development.
576
577 ----------------------------------------------------------------------------
578
579 Version 0.98.0 - Work in progress (This number skipped)
|
580 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
581 mike 1.36
|
582 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
583 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
584
|
585 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
586 in the HTML URL reference for passing instance names.
587
|
588 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
589
590 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
591
|
592 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
593 allow slp to compile.
594
|
595 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
596
597 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
598 ids to queue pointers).
599
|
600 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
601 and Dispatcher.
602
|
603 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
604 and
605 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
606 chip 1.44 ResponseHandler for Provider2 interface.
|
607 mike 1.45
608 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
609
610 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
611
|
612 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
613
|
614 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
615
616 12. (Mike Brasher) - Fixed compiler error on Linux.
617
|
618 karl 1.38 ------------------------------------------------------------------------------
619 --
|
620 mike 1.26
|
621 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
622 karl 1.16
623 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
624 for NT and Linux platforms.
|
625 mike 1.26
|
626 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
627 5988.
628 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
629 the DMTF.
|
630 mike 1.26
|
631 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
632 Fusion event. THis included a) extended the test for end of HTTP header from
633 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
634 Extended the HTTP message ID to allow for non-numeric message IDs.
|
635 mike 1.26
|
636 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
637 and created RepositoryDeclContext.{cpp,h}. This is the first step in
638 revamping the compiler to work independently of the repository (grb).
|
639 mike 1.26
|
640 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
641 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
642 Now when you build normally, you will get the committed grammar and parser
643 files instead of generating your own for a particular platform. This should
644 prevent back-level lex and yacc implementations from generating troublesome
645 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
646 bob 1.20 (grb)
|
647 mike 1.26
|
648 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
649 This change paves the way for upcoming changes that will allow the compiler
650 to work indepently of the repository. (grb)
|
651 mike 1.26
|
652 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
653 mike 1.26
|
654 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
655 modifyClass,
|
656 chip 1.22 createClass to protect caller's object.
|
657 mike 1.26
|
658 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
659 directory. These
660 interfaces allow very smart providers to perform advances operations.
661 CIMProviderStub has
|
662 chip 1.23 been updated to support the new interfaces. Needs testing.
|
663 mike 1.26
|
664 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
665 mike 1.26
|
666 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
667 repository you make world, make rebuild or make repository. ks
|
668 mike 1.26
669 12. Added associators() and associatorNames() operations to CIM repository.
|
670 mike 1.27 (MEB)
671
672 13. More on association implementation (all four operations supported).
673 Need to handle deletion of associations and protocol stubs still.
674 Need to test class associations (rather than just instance associations).
675 Need to handle deleteInstance().
676 (MEB)
|
677 mike 1.26
|
678 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
679
|
680 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
681 AssociationName
|
682 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
683 pages.
684
|
685 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
686 sage 1.31
687 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
688 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
689 Made cimserver accept the -D flag to eliminate the need for environment
690 variables.
|
691 mike 1.32
692 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
693 References() and ReferenceNames() CIM operations. These only operate
694 on instances at this time. They will operate on classes soon.
|
695 kumpf 1.34
696 19. (Mike Glantz) Extended and modified dynamic support
697 changes to (1) work on HP-UX and (2) have all images and libraries
698 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
699 change is to program.mak and library-unix.mak, removing specific
700 lists of dynamic library specs and putting them in the Makefile
701 and libraries.mak files that build the actual targets (lots of
702 these now have DYNAMIC_LIBRARIES defined).
|
703 karl 1.35
704 20. (Karl) added basic Queue function to common (based on array) and added
705 tests for stack and queue.
|
706 karl 1.38
707 ------------------------------------------------------------------------------
708 --
|
709 mike 1.36
|
710 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
711 karl 1.11
|
712 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
713 CIMServer (both)
|
714 karl 1.11 Functions added include:
715 a. Enable trace to log file.
|
716 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
717 is
|
718 karl 1.11 trace to log, -t is trace to console).
719 c. add parameter in optionsrow for help message and enable the capture
|
720 karl 1.12 of these messages in Options class. Also added help print that
721 prints these things out. However, format not to beautiful.
|
722 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
723 e. Extend the Clients\testclient so he does tests on Namespace.
|
724 karl 1.15 2. (KS)Extended Log to show time, severity.
|
725 mike 1.33
|
726 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
727 mike 1.33
|
728 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
729 logs
|
730 karl 1.12 are put
|
731 mike 1.33
|
732 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
733 This is a preliminary version.
|
734 mike 1.33
|
735 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
736 karl 1.13 throws CannotBind exception.
|
737 mike 1.33
|
738 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
739 not
|
740 karl 1.14 print out all of the message. At the least it prints out the error message
741 and components of the message causing the problem.
|
742 mike 1.33
|
743 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
744 mike 1.33
|
745 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
746 karl 1.14 existed.
|
747 mike 1.33
748 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
749 karl 1.15
|
750 karl 1.29 ------------------------------------------------------------------------------
751 --
|
752 karl 1.6 Version 0.97.2
753
754 1. Extend HP UX port to correctly load Dynamic Load Libraries.
755 2. Extend Formatter for Boolean and Uint32 types.
756 3. Change CIM Server to use Trace (-t) flag. This also changed
757 Handler.h to work off of flag.
758 4. Minor corrections to __Namespace Provider.
759 5. Extend tests for Formatter, String, and other modules.
760 6. Correct errors in documentation.
761 7. New working papers (provider interface).
|
762 karl 1.8 8. Add Providerreg.exe tool.
763 9. Add trace output for messages sent from the Server.
|
764 mike 1.26
|
765 karl 1.29 ------------------------------------------------------------------------------
766 --
|
767 mike 1.26
|
768 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
769 karl 1.5
|
770 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
771 find functions. Note: This symbol is defined in config.h. (ks).
772
|
773 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
774 of dynamic lib loaading.
|
775 karl 1.1
776
|
777 karl 1.29 ------------------------------------------------------------------------------
778 --
|
779 mike 1.26
|
780 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
781 karl 1.1
782 1. Added methods in CIMClass, CIMInstance, for existance of properties,
783 qualifiers, methods.
784 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
785 methods.
786 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
787 qualifiers and to
788 remove qualifiers.
789 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
790 compiler. It probably imposed more limitations than would be required with
|
791 karl 1.2 the current compiler. This version of the port produces an excessively large
792 common module due to template bloat. That problem will be fixed in a future
793 change to the port. Also there are a log of duplicate symbol warnings generate
794 by the AIC compiler but these cause no problems. The port has been tested
795 with the complete unit test and client/server test successfully.
|
796 karl 1.1
797 --------------------------------------------------------------------------
|
798 karl 1.2
|
799 mike 1.4 23 May 2001
|
800 karl 1.1
|
801 mike 1.9 1. Ported to HPUX
|
802 karl 1.5
|
803 mike 1.9 --------------------------------------------------------------------------
804
805 29 May 2001
806
807 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
808 mike 1.51
809
810
811
|
812 karl 1.48
|
813 karl 1.38
|
814 karl 1.30
|
815 karl 1.29
|
816 mike 1.10
|