1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 mike 1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
62
|
63 kumpf 1.49.2.21 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
64
|
65 sage 1.49.2.22 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
66
|
67 kumpf 1.49.2.23 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
68 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
69 a web server. See doc/Servlet for more information.
70
|
71 kumpf 1.49.2.24 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
72 CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML
73 input and output can be written in a trace file.
74
|
75 sage 1.49.2.25 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
76 Created new class SignalHandler that allow registration, activation and
77 deactivation of signal handler functions (Linux only !).
78
|
79 kumpf 1.49.2.39 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and
80 ExportClient to support ExportIndication. DisplayConsumer, a sample
81 consumer is added which will consume (by displaying on screen) the
82 indication exported by CIMExportRequestDispatcher. This complete
83 implementation is based on CIM_EXPORT_INDICATION_REQUEST and
84 RESPONSE messages. CIMMessage.h, Message.cpp and Message.h files
85 are modified to implement above messages.
86
87 XmlIndicationDispatcher test program is modified to test complete
88 operation. It now creates a consumer, handler and indication
89 instance and then calls CIMExportRequestDispatcher to export the
90 indication to consumer. This program needs
91 src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof
92 and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded
93 in the repository to complete the test successfully. This test
94 program also needs Handler qualifier defined in repository and
95 modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP class as
96 below:
|
97 kumpf 1.49.2.26
98 //====================================================================
99 // CIM_IndicationHandlerXMLHTTP
100 //====================================================================
101 [Description (
102 "CIM_IndicationHandlerXMLHTTP describes the destination for "
103 "Indications to be delivered via HTTP, using a cimXML "
104 "representation."), Handler ("CIMxmlIndicationHandler") ]
105
|
106 kumpf 1.49.2.27 23. (Sushma Fernandes - HP) 27 Sep 2001 - Added tracing code in
107 ProviderTable.cpp and SystemUnix.cpp to indicate progress of loading
108 a provider library.
|
109 kumpf 1.49.2.28
|
110 kumpf 1.49.2.39 24. (Nitin Upasani - HP) 05 Oct 2001 - implementation of InvokeMethod
111 interface for the provider. InvokeMethod currently uses CIMValue as
112 type for inParameters and outParameters, which are unable to give
113 information about param name, type and value. This should be changed
114 to CIMParamValue which will help providers to know details of the
115 parameter name and type along with value passed through InvoleMethod
116 call. Current implementation uses CIMParamValue as parameters while
117 travelling through message queues and converts it back to array of
118 CIMValue before calling Provider API (which needs to be changed
119 later).
|
120 kumpf 1.49.2.28
121 Also added are two test programs:
122
|
123 kumpf 1.49.2.39 src/Pegasus/Common/tests/ParamValue - which demonstrate use of
124 CIMParamValue class.
|
125 kumpf 1.49.2.28
|
126 kumpf 1.49.2.39 src/Pegasus/Client/tests/InvokeMethod - which makes call to
127 InvokeMethod and displays the return value. Current
128 implementation assumes that provider had returned true value
129 and outParameters (which are now hard coded in
130 CIMOperationRequestDispatcher to implement functionality)
131 which are passed as response of InvokeMethod to client.
|
132 kumpf 1.49.2.28
|
133 kumpf 1.49.2.29 25. (Nag Boranna - HP) 05 Oct 2001 - Added first level implementation of
|
134 kumpf 1.49.2.39 authentication to the pegasus code. Created an Authentication Manager
135 and authenticator interfaces. The file based local authentication
136 module has been modified to implement the local authenticator
137 interface, to generate the challenge for the unauthorized requests
138 and to verify the authentication.
139
140 A skeleton program has been created for the Basic Authenticator.
141 This code is in the Security/Authentication directory which is not
142 yet linked into the build.
143
144 26. (Nitin Upasani - HP) 08 Oct 2001 - Changes to Operation and Export
145 Decoders. Earlier decoders were sending requests and responses
146 before finishing complete Xml parse. This was prone to send
147 request/response even the Xml is wrong after the MethodCall.
148 New changes collects the Message* as return value from the
149 appropriate functions while parsing the Xml and sends on
150 _outputQueue only when Xml is parsed successfully.
151
152 27. (Nag Boranna - HP) 11 Oct 2001 - Modified ProviderModule.cpp to
153 fix the problem with constructing provider name and loading the
154 providers for unix platforms. Also moved the shared library name
155 kumpf 1.49.2.39 construction (appending .sl or .so) from
156 CIMOperationRequestDispatcher.cpp/SystemUnix.cpp to
157 ProviderModule.cpp and included it in a method that returns
158 provider file path name.
159
160 28. (Nitin Upasani - HP) 12 Oct 2001 - Implementation of SNMP Indication
161 Handler. This handler extracts MappingStrings qualifier from class
162 definition and converts it into SNMP specific trap data. The trap
163 structure is defined in a abstract class in snmpDeliverTrap.h file.
164 Every one has his or her own SNMP agent, which will talk with master
165 agent to deliver the trap or may have some other mechanism.
166 Extending snmpDeliverTrap class and deliverTrap method will help to
167 implement specific trap delivery mechanism.
|
168 kumpf 1.49.2.32
|
169 kumpf 1.49.2.33 29. (Yi Zhou - HP) 09 Oct 2001 - Changed cimconfig to allow setting property to
170 be NULL. Also, if -u -p specified in the cimconfig, instead of updating
171 property value to be default in the plan file, remove the property from the
172 plan file. Converted ConfigSettingProvider to use provider2 library.
|
173 kumpf 1.49.2.34
174 30. (Sushma Fernandes - HP) 24 Oct 2001 - Added an interface to the tracer
175 to allow tracing of a specific number of bytes in a given
176 string. Also modified the XmlIO trace code to use the new interface.
|
177 rudy 1.49.2.38 Changed the config file defaults for tracing.
|
178 kumpf 1.49.2.35
|
179 rudy 1.49.2.38 31. (Rudy Schuet - Compaq) 28 Oct 2001 - Added "make" support for Compaq
180 NonStop platform (NSK) in directory pegasus/mak. The following files
181 were added: platform_NSK_NONSTOP_NMCPLUS.mak, objects-nsk.mak,
182 library-nsk.mak, config-nsk.mak, program-nsk.mak, program-windows.mak,
183 program-unix.mak. The original program.mak which previously covered
184 all platforms was split into platform-specific make files, and now
185 only contains conditionals. Files config.mak, objects.mak, and
186 library.mak were changed to include the NSK files.
187 File platform_NSK_NONSTOP_NMCPLUS.mak includes config-nsk.mak.
188
189 32. (Jenny Yu - HP) 29 Oct 2001 - Fixed CIMReference constructor to allow
|
190 kumpf 1.49.2.35 commas (,) in the string values of key properties.
|
191 karl 1.49.2.36
|
192 kumpf 1.49.2.39 33. (Karl Schopmeyer) 30 October 2001- Move the repository load to CIM schema 2.6
|
193 rudy 1.49.2.38
194 34. (Rudy Schuet - Compaq) 30 Oct 2001 - Fixed a problem in
195 pegasus/mak/program-windows.mak that prevented program builds for
196 the windows platform (related to change from 28 Oct). Replaced
197 leading whitespace in front of commands with tabs as required
198 in make files.
|
199 karl 1.49.2.40
200 35. (K Schopmeyer 2 Nov 2001)Temporarily moved repository back to CIM25
201 because getting an error in 26
|
202 kumpf 1.49.2.39
203 35. (Roger Kumpf - HP) 30 Oct 2001 - Association classes have keys
204 whose types are references. These reference values must be
205 treated specially in the XML encoding, using the VALUE.REFERENCE
206 tag structure.
207
208 Pegasus had been passing reference values simply as String values.
209 For example, EnumerateInstanceNames returned KEYVALUEs of string
210 type rather than VALUE.REFERENCEs.
211
212 I've modified the XmlReader::getKeyBindingElement() and
213 CIMReference::instanceNameToXml() methods to read and write the
214 XML in the proper format. However, making that change required
215 that a CIMReference object be able to distinguish between a key
216 of String type and a key of reference type.
217
218 I've modified the String format of CIMReferences slightly to
219 allow efficient processing of references whose keys are also of
220 reference type. The "official" form uses the same encoding for
221 key values of String type and of reference type, and so it
222 would be necessary to retrieve the class definition and look up
223 kumpf 1.49.2.39 the types of the key properties to determine how to treat the
224 key values. This is clearly too inefficient for internal
225 transformations between CIMReferences and String values.
226
227 The workaround is to encode a 'R' at the beginning of the value
228 for a key of reference type (before the opening '"'). This allows
229 the parser to know a priori whether the key is of String or
230 reference type.
231
232 In this example:
233
234 MyClass.Key1="StringValue",Key2=R"RefClass.KeyA="StringA",KeyB=10"
235
236 Property Key1 of class MyClass is of String type, and so it gets
237 the usual encoding. Key2 is a reference property, so the extra 'R'
238 is inserted before its encoded value. Note that this algorithm is
239 recursive, such that RefClass could include KeyC of reference type,
240 which would also get encoded with the 'R' notation.
241
242 The toString() method inserts the 'R' to provide symmetry. A new
243 KeyBinding type (REFERENCE) has been defined to denote keys in a
244 kumpf 1.49.2.39 CIMReference that are of reference type. This KeyBinding type must
245 be used appropriately for CIMReference::ttoString() to behave
246 correctly.
247
248 The files that have been modified to make this change are
249 CIMReference.h, CIMReference.cpp, and CIMInstanceRep.cpp.
250
251 A result of this change is that instances names in the instance
252 repository will include this extra 'R' character. Thus, you will
253 need to repopulate your repository when you download the latest
254 CIMOM version.
255
256 Note that for user-facing uses of the String encoding of instance
257 names (such as might appear in MOF for static association
258 instances or in the CGI client), this solution is non-standard and
259 therefore unacceptable. It is likely that these points will need
260 to process the more expensive operation of retrieving the class
261 definition to determine the key property types.
|
262 karl 1.49.2.37
|
263 kumpf 1.49.2.41 36. (Sushma Fernandes - HP) Modified tracer to return invalid components
264 in case of error in setting trace components. Modified the property owner
265 init and update methods. Submitted the pegasus/mak/Buildmakefile with
266 cleanbuild, rebuild and trace configuration options.
267
|
268 kumpf 1.49.2.42 37. (Yi Zhou - HP) 05 Nov 2001 Fixed createInstance to return a CIMReference
269 (instanceName).
270
|
271 kumpf 1.49.2.43 38. (Roger Kumpf - HP) 08 Nov 2001 Implemented encoding/decoding of
272 GetProperty/SetProperty/EnumerateInstances request/response messages.
273 Added encoding and decoding of PropertyList parameters on all
274 relevant intrinsic methods.
275
|
276 sage 1.49.2.44 39. (Markus Mueller - IBM) 09 Nov 2001 Added Associator calls to CIMBase
277 ProviderFacade.cpp; fixed Provider unloading in CIMProviderManager.cpp
278
|
279 rudy 1.49.2.45 40. (Rudy Schuet - Compaq) 12 Nov 2001 Common module: added the following
280 files for nsk platform support: TraceFileHandlerNsk.cpp, ThreadNsk.cpp,
281 TCPChannelNsk.cpp, SystemNsk.cpp, ServiceNsk.cpp, SelectorNsk.cpp,
282 IPCNsk.cpp, DirNsk.cpp. Most of these files (with the exception of
283 SystemNsk.cpp) contain stubs. The associated control files
284 (TraceFileHandler.cpp, Thread.cpp, etc) have been updated to include
285 nsk platform links.
286
|
287 kumpf 1.49.2.46 41. (Roger Kumpf - HP) 14 Nov 2001 Changed the behavior of the CIMValue
288 toString() method for CIMValues of String type. The old behavior
289 returned an XML encoding of the String with special characters
290 replaced by their UTF-8 equivalents. For example, a CIMValue of a"b
291 would be returned as a"b. The new behavior just returns the
292 String value directly with no translation. (Note that
293 CIMValue.toXml() may still be used to get the XML-encoded value.)
294
295 This change was necessary in part to correct the behavior of the
296 repository. CreateInstance stores the instance name returned by
297 CIMInstance.getInstanceName(), which is built using calls to
298 CIMValue.toString(). GetInstance searches for the instance name
299 without UTF-8 encoding of special characters. For GetInstance to
300 be successful, CreateInstance must have stored the instance name
301 in that same form, without special character encoding.
302
|
303 kumpf 1.49.2.47 42. (Roger Kumpf - HP) 15 Nov 2001 Added a toXml(void) method to
304 the CIMValue class. Eliminated improper use of CIMValue.toString(),
305 often replacing with CIMValue.get(String&) or CIMValue.toXml().
306 Also added some error handling in the indication handlers.
307
|
308 kumpf 1.49.2.48 43. (Sushma Fernandes - HP) 16 Nov 2001 Added a function
309 localObjectPathtoXml(Array<Sint8>& out) to the CIMReference class
310 to handle local instance path and local classpath. Modified the
311 CIMOperationRequestDecoder to handle <LOCALCLASSPATHELEMENT ...>.
312 Changed the CIMOperationRequestEncoder to call the localObjectPathtoXml.
313
|
314 kumpf 1.49.2.49 44. (Roger Kumpf - HP) 19 Nov 2001 Added a CIMNamedInstance class
315 to hold the argument to ModifyInstance and the return values
316 from EnumerateInstances. The client and provider APIs need to
317 be updated to use this class.
318
|
319 kumpf 1.49.2.50 45. (Sushma Fernandes - HP) 19 Nov 2001 Added the cimuser command line
320 source files. This CLI allows addition, modification, removal and listing
321 of CIM users. The CLI is not linked to the main makefile as the Provider
322 functionality is yet to be implemented. Added the function
323 String getPassword(char* prompt) to the System.h and cpp files.
324
|
325 kumpf 1.49.2.51 46. (Nag Boranna - HP) 20 Nov 2001 Implemented Authentication code on
326 the server to challenge the unauthorized requests, authenticate
327 the challenge responses, and verify the subsequent authorized requests.
328 Implemented authentication mechanism on the Client api to send
329 responses to the challenges from the server. Current implementation
330 supports only 'local' authentication mechanism.
331
|
332 kumpf 1.49.2.52 47. (Roger Kumpf - HP) 20 Nov 2001 Commited the following set of changes:
333
334 - Changed the return value of EnumerateInstances from Array<CIMInstance>
335 to Array<CIMNamedInstance>
336 - Changed the parameter to ModifyInstance from CIMInstance to
337 CIMNamedInstance
338 - Added an optional PropertyList parameter to ModifyInstance
339 - Changed all handling of PropertyList parameters to use the
340 CIMPropertyList class instead of Array<String>
341
342 Each of these changes was required to comply with the DMTF specification.
343
344 These changes were made throughout the system except for in the provider
345 API. For now, the CIMProviderHandle and CIMBaseProviderHandle hide the
346 differences from providers, so older providers will continue to function.
347 However, this means that clients can not yet take advantage of the added
348 functionality.
349
350 When the provider API is updated, the following changes will be visible:
351
352 - Providers will get a PropertyList parameter to ModifyInstance which
353 kumpf 1.49.2.52 they are required to respect. Providers that can not process the
354 PropertyList must throw a NOT_SUPPORTED exception whenever the
355 list is not null. Clients can take advantage of this change by
356 issuing a ModifyInstance request against a selected set of
357 properties in an instance, rather than being required to replace
358 the entire instance.
359
360 - Providers will be required to return instance names along with
361 instances in the EnumerateInstances method. Clients will receive
362 these instance names, as the standard dictates.
363
364 - Providers will receive a CIMPropertyList argument containing the
365 PropertyList instead of an Array<String>. This change allows
366 providers to distinguish between an empty list and a null list.
367
368 Note that the repository also does not yet handle the PropertyList in
369 ModifyInstance correctly.
370
|
371 kumpf 1.49.2.53 47. (Roger Kumpf - HP) 21 Nov 2001 I have updated the Provider2 instance
372 provider API to match the changes made to the EnumerateInstances and
373 ModifyInstance operations. These changes were made to comply with
374 the DMTF specification.
375
376 The original Provider API has not been updated, and I have no
377 plans to do so. Providers written to the original API will
378 continue to function, but they will not have the opportunity
379 to take advantage of the features that have been added.
380
381 The significant changes to the Provider2 API are:
382
383 - Providers will get a PropertyList parameter to ModifyInstance which
384 they are required to respect. Providers that can not process the
385 PropertyList must throw a NOT_SUPPORTED exception whenever the
386 list is not null. Clients can take advantage of this change by
387 issuing a ModifyInstance request against a selected set of
388 properties in an instance, rather than being required to replace
389 the entire instance.
390
391 - Providers will get an IncludeQualifiers parameter to ModifyInstance
392 kumpf 1.49.2.53 which they are required to respect. If IncludeQualifiers is
393 false, the qualifiers on the modified instance provided must not
394 be used to update the instance.
395
396 - Providers will be required to return instance names along with
397 instances in the EnumerateInstances method. Clients will receive
398 these instance names, as the standard dictates.
399
400 The providers that are in the Pegasus build have all been updated.
401 However, whenever the PropertyList is not null, the providers throw
402 a NOT_SUPPORTED exception.
403
|
404 karl 1.49 ---------------------------------------------------------------------------
|
405 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
406 Tagged as version_1_01 on 3 August 2001 (sorry should have been
407 1.1
|
408 karl 1.49
|
409 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
410 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
411 and ExportClient classes. the indication.
|
412 kumpf 1.49.2.1
|
413 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
414 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
415
|
416 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
417 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
418 karl 1.49
|
419 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
420 library and a thread-safe message queue (first stage). Classes defined
421 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
422 and SimpleThread.
423
|
424 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
425 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
426 information on using wbemexec. A simple test script is included. Please
427 see pegasus/src/Clients/wbemexec/tests/readme for information on running
428 the test script.
|
429 kumpf 1.49.2.3
|
430 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
431 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
432 and
|
433 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
434 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
435 src/Pegasus/Common/TraceFileHandler.cpp.
|
436 kumpf 1.49.2.3
|
437 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
438 Config CLI. Please refer to the documentation
439 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
440 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
441 using the config framework and cimconfig CLI. Make sure to load the config
442 mof (src/gmake config) before starting the cimserver. A simple test script
|
443 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
444 kumpf 1.49.2.4 information on running the test script.
|
445 karl 1.49.2.5
446 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
447 (changed the H and CPP files for the major CIM objects. These
448 functions generate CIM MOF output for the objects.
449
|
450 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
451 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
452 that
453 connect to CIM Server on the same system without having to specify a
454 password.
455 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
456 This component only works on unix and it's not linked in with the main
457 build.
458 When authentication framework is defined this component may need to be
|
459 kumpf 1.49.2.6 modified to integrate with the framework.
460
|
461 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
462 Added a constant to define the maximum length of uint32.
|
463 kumpf 1.49.2.6
|
464 karl 1.49 ---------------------------------------------------------------------------
465 Version 0.99.x (Fixes to version 0.99) in Process
|
466 karl 1.49.2.5
|
467 karl 1.49 NOTE: Please do not input anything to this branch except for critical
468 fixes. This is, in effect, 1.0 and we do not want to use it for
469 development.
470
471 ----------------------------------------------------------------------------
472
473 Version 0.98.0 - Work in progress (This number skipped)
|
474 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
475 mike 1.36
|
476 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
477 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
478
|
479 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
480 in the HTML URL reference for passing instance names.
481
|
482 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
483
484 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
485
|
486 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
487 allow slp to compile.
488
|
489 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
490
491 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
492 ids to queue pointers).
493
|
494 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
495 and Dispatcher.
496
|
497 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
498 and
499 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
500 chip 1.44 ResponseHandler for Provider2 interface.
|
501 mike 1.45
502 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
503
504 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
505
|
506 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
507
|
508 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
509
510 12. (Mike Brasher) - Fixed compiler error on Linux.
511
|
512 karl 1.38 ------------------------------------------------------------------------------
513 --
|
514 mike 1.26
|
515 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
516 karl 1.16
517 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
518 for NT and Linux platforms.
|
519 mike 1.26
|
520 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
521 5988.
522 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
523 the DMTF.
|
524 mike 1.26
|
525 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
526 Fusion event. THis included a) extended the test for end of HTTP header from
527 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
528 Extended the HTTP message ID to allow for non-numeric message IDs.
|
529 mike 1.26
|
530 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
531 and created RepositoryDeclContext.{cpp,h}. This is the first step in
532 revamping the compiler to work independently of the repository (grb).
|
533 mike 1.26
|
534 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
535 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
536 Now when you build normally, you will get the committed grammar and parser
537 files instead of generating your own for a particular platform. This should
538 prevent back-level lex and yacc implementations from generating troublesome
539 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
540 bob 1.20 (grb)
|
541 mike 1.26
|
542 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
543 This change paves the way for upcoming changes that will allow the compiler
544 to work indepently of the repository. (grb)
|
545 mike 1.26
|
546 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
547 mike 1.26
|
548 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
549 modifyClass,
|
550 chip 1.22 createClass to protect caller's object.
|
551 mike 1.26
|
552 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
553 directory. These
554 interfaces allow very smart providers to perform advances operations.
555 CIMProviderStub has
|
556 chip 1.23 been updated to support the new interfaces. Needs testing.
|
557 mike 1.26
|
558 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
559 mike 1.26
|
560 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
561 repository you make world, make rebuild or make repository. ks
|
562 mike 1.26
563 12. Added associators() and associatorNames() operations to CIM repository.
|
564 mike 1.27 (MEB)
565
566 13. More on association implementation (all four operations supported).
567 Need to handle deletion of associations and protocol stubs still.
568 Need to test class associations (rather than just instance associations).
569 Need to handle deleteInstance().
570 (MEB)
|
571 mike 1.26
|
572 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
573
|
574 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
575 AssociationName
|
576 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
577 pages.
578
|
579 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
580 sage 1.31
581 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
582 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
583 Made cimserver accept the -D flag to eliminate the need for environment
584 variables.
|
585 mike 1.32
586 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
587 References() and ReferenceNames() CIM operations. These only operate
588 on instances at this time. They will operate on classes soon.
|
589 kumpf 1.34
590 19. (Mike Glantz) Extended and modified dynamic support
591 changes to (1) work on HP-UX and (2) have all images and libraries
592 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
593 change is to program.mak and library-unix.mak, removing specific
594 lists of dynamic library specs and putting them in the Makefile
595 and libraries.mak files that build the actual targets (lots of
596 these now have DYNAMIC_LIBRARIES defined).
|
597 karl 1.35
598 20. (Karl) added basic Queue function to common (based on array) and added
599 tests for stack and queue.
|
600 karl 1.38
601 ------------------------------------------------------------------------------
602 --
|
603 mike 1.36
|
604 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
605 karl 1.11
|
606 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
607 CIMServer (both)
|
608 karl 1.11 Functions added include:
609 a. Enable trace to log file.
|
610 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
611 is
|
612 karl 1.11 trace to log, -t is trace to console).
613 c. add parameter in optionsrow for help message and enable the capture
|
614 karl 1.12 of these messages in Options class. Also added help print that
615 prints these things out. However, format not to beautiful.
|
616 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
617 e. Extend the Clients\testclient so he does tests on Namespace.
|
618 karl 1.15 2. (KS)Extended Log to show time, severity.
|
619 mike 1.33
|
620 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
621 mike 1.33
|
622 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
623 logs
|
624 karl 1.12 are put
|
625 mike 1.33
|
626 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
627 This is a preliminary version.
|
628 mike 1.33
|
629 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
630 karl 1.13 throws CannotBind exception.
|
631 mike 1.33
|
632 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
633 not
|
634 karl 1.14 print out all of the message. At the least it prints out the error message
635 and components of the message causing the problem.
|
636 mike 1.33
|
637 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
638 mike 1.33
|
639 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
640 karl 1.14 existed.
|
641 mike 1.33
642 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
643 karl 1.15
|
644 karl 1.29 ------------------------------------------------------------------------------
645 --
|
646 karl 1.6 Version 0.97.2
647
648 1. Extend HP UX port to correctly load Dynamic Load Libraries.
649 2. Extend Formatter for Boolean and Uint32 types.
650 3. Change CIM Server to use Trace (-t) flag. This also changed
651 Handler.h to work off of flag.
652 4. Minor corrections to __Namespace Provider.
653 5. Extend tests for Formatter, String, and other modules.
654 6. Correct errors in documentation.
655 7. New working papers (provider interface).
|
656 karl 1.8 8. Add Providerreg.exe tool.
657 9. Add trace output for messages sent from the Server.
|
658 mike 1.26
|
659 karl 1.29 ------------------------------------------------------------------------------
660 --
|
661 mike 1.26
|
662 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
663 karl 1.5
|
664 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
665 find functions. Note: This symbol is defined in config.h. (ks).
666
|
667 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
668 of dynamic lib loaading.
|
669 karl 1.1
670
|
671 karl 1.29 ------------------------------------------------------------------------------
672 --
|
673 mike 1.26
|
674 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
675 karl 1.1
676 1. Added methods in CIMClass, CIMInstance, for existance of properties,
677 qualifiers, methods.
678 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
679 methods.
680 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
681 qualifiers and to
682 remove qualifiers.
683 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
684 compiler. It probably imposed more limitations than would be required with
|
685 karl 1.2 the current compiler. This version of the port produces an excessively large
686 common module due to template bloat. That problem will be fixed in a future
687 change to the port. Also there are a log of duplicate symbol warnings generate
688 by the AIC compiler but these cause no problems. The port has been tested
689 with the complete unit test and client/server test successfully.
|
690 karl 1.1
691 --------------------------------------------------------------------------
|
692 karl 1.2
|
693 mike 1.4 23 May 2001
|
694 karl 1.1
|
695 mike 1.9 1. Ported to HPUX
|
696 karl 1.5
|
697 mike 1.9 --------------------------------------------------------------------------
698
699 29 May 2001
700
701 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
702 karl 1.49.2.8
|
703 karl 1.49.2.5
704
705
|
706 karl 1.48
|
707 karl 1.38
|
708 karl 1.30
|
709 karl 1.29
|
710 mike 1.10
|