1 karl  1.1 CHANGE LOG FOR PEGASUS
  2           

  3 karl  1.49.2.8 Version 1.1.1 - 3 August 2001 -  Development Branch (Work in Progress)
  4                		current working dev branch of build

  5 mike  1.36     

  6 karl  1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
  7                	seen as part of CGIclient class displays.

  8 karl  1.49.2.10 	
  9                 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
 10                 	to the final version in Schemas\CIM25.  This included minor
 11                 	corrections, etc and a couple of file changes. This is the
 12                 	official final CIM 25 schema relesed by the DMTF.  This change
 13                 	should not affect any current work.
 14                 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
 15                 	directorys.  Note however that today the make repository still
 16                 	loads the 2.5 schema.

 17 karl  1.49.2.11 	
 18                 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
 19                         on XML output.
 20                         

 21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
 22                 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
 23                 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp).  aCC scopes variable
 24                 declarations in for loop initializers outside the loop, so multiple
 25                 "for (int i=0; i<10; i++);" statements cause a compile error.
 26                 

 27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove 
 28                 dependency on the config files at the start of the cimserver. Now the 
 29                 cimserver will use in-memory default values in the absence of config files 
 30                 and command line options. Fixed a few defects in the config framework that 
 31                 were causing cimom to crash under certain conditions. Changed the config 
 32                 provider class name to 'PG_ConfigSetting' in the mof file and modified 
 33                 provider implementation files accordingly. Also modified the config CLI 
 34                 to show user friendly error/status messages.

 35 karl  1.49.2.11         

 36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI 
 37                 (reported incorrect line number on error in XML request if input redirected).  
 38                 Enhanced the -d debug command line option to allow more flexibility in 
 39                 generating debug output.
 40                 

 41 karl  1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
 42                 xml when it generates xml output.
 43                 

 44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
 45                 a common file to reduce the number of files required by the default
 46                 repository implementation.
 47                 

 48 mike  1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
 49                 
 50                 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
 51                 
 52                 12. (Mike Brasher) - Committed rework of server into queue approach.
 53                 
 54                 13. (Mike Brasher) - New webserver and webclient examples.
 55                 

 56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
 57                 

 58 mike  1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
 59                     CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
 60                 

 61 mike  1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
 62                 

 63 kumpf 1.49.2.21 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure.  This submittal also includes an initial set of test scripts.
 64                 

 65 sage  1.49.2.22 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
 66                 

 67 kumpf 1.49.2.23 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
 68                     interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
 69                     a web server. See doc/Servlet for more information.
 70                 

 71 kumpf 1.49.2.24 20. (Yi Zhou - HP) 20 Sep 2001 - Added tracing in files
 72                     CIMOperationRequestDecoder.cpp and CIMOperationResponseEncoder.cpp so XML 
 73                     input and output can be written in a trace file.
 74                 

 75 sage  1.49.2.25 21. (Markus Mueller - IBM) 25 Sep 2001 - Initial Signal Handler support
 76                     Created new class SignalHandler that allow registration, activation and
 77                     deactivation of signal handler functions (Linux only !).
 78                 

 79 kumpf 1.49.2.26 22. (Nitin Upasani - HP) 27 Sep 2001 - Modification of ExportServer and ExportClient 
 80                     to support ExportIndication. DisplayConsumer, a sample consumer is added which 
 81                     will consume (by displaying on screen) the indication exported by 
 82                     CIMExportRequestDispatcher. This complete implementation is based on 
 83                     CIM_EXPORT_INDICATION_REQUEST and RESPONSE messages. CIMMessage.h, Message.cpp 
 84                     and Message.h files are modified to implement above messages. 
 85                 
 86                     XmlIndicationDispatcher test program is modified to test complete operation. 
 87                     It now creates a consumer, handler and indication instance and then calls 
 88                     CIMExportRequestDispatcher to export the indication to consumer. This
 89                     program needs src/Pegasus/Server/tests/XmlIndicationDispatcher/TestSoftwarePkg.mof 
 90                     and Schemas/Pegasus/PG_ConsumerRegistration.mof files to be loaded in the repository
 91                     to complete the test successfully. This test program also needs Handler qualifier 
 92                     defined in repository and modify CIM_Event25.mof for CIM_IndicationHandlerXMLHTTP 
 93                     class as below:
 94                 
 95                     //====================================================================
 96                     //  CIM_IndicationHandlerXMLHTTP
 97                     //====================================================================
 98                     [Description (
 99                       "CIM_IndicationHandlerXMLHTTP describes the destination for "
100 kumpf 1.49.2.26       "Indications to be delivered via HTTP, using a cimXML "
101                       "representation."), Handler ("CIMxmlIndicationHandler") ]
102                 

103 karl  1.49      ---------------------------------------------------------------------------

104 karl  1.49.2.8  Version 1.1 - July 2001 Development branch
105                               Tagged as version_1_01 on 3 August 2001 (sorry should have been
106                               1.1

107 karl  1.49      

108 karl  1.49.2.5  1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
109                    indication by defining IndicationDispatcher, HandlerTable, CIMHandler
110                    and ExportClient classes. the indication.

111 kumpf 1.49.2.1  

112 karl  1.49.2.5     Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to

113 kumpf 1.49.2.1     make the delivery of indications over Xml-HTTP and email respectively.
114                 

115 karl  1.49.2.5     Provided examples for HandlerTable, XmlIndicationDelivery and

116 kumpf 1.49.2.1     SendMailIndicationDelivery to support this implementation.

117 karl  1.49      

118 sage  1.49.2.2  2. (Markus Mueller - IBM) Implementation of a Linux specific threading
119                    library and a thread-safe message queue (first stage). Classes defined
120                    are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
121                    and SimpleThread.
122                 

123 kumpf 1.49.2.3  3. (Carol Ann Krug Graves - HP)  Implementation of wbemexec CLI.  Please refer

124 karl  1.49.2.5     to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
125                    information on using wbemexec.  A simple test script is included.  Please
126                    see pegasus/src/Clients/wbemexec/tests/readme for information on running
127                    the test script.

128 kumpf 1.49.2.3  

129 kumpf 1.49.2.4  4. (Sushma Fernandes - HP)  Implementation of Trace Framework.  Please

130 karl  1.49.2.5     refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
131                    and

132 kumpf 1.49.2.4     src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
133                    the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
134                    src/Pegasus/Common/TraceFileHandler.cpp.

135 kumpf 1.49.2.3  

136 kumpf 1.49.2.4  5. (Nag Boranna - HP)  Implementation of Config Framework, Config Provider and
137                    Config CLI. Please refer to the documentation
138                    in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
139                    in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
140                    using the config framework and cimconfig CLI. Make sure to load the config
141                    mof (src/gmake config) before starting the cimserver. A simple test script

142 karl  1.49.2.5     is included. Please see pegasus/src/Clients/wbemexec/tests/readme for

143 kumpf 1.49.2.4     information on running the test script.

144 karl  1.49.2.5  
145                 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
146                    (changed the H and CPP files for the major CIM objects. These
147                    functions generate CIM MOF output for the objects.
148                 

149 kumpf 1.49.2.6  7. (Bapu Patil - HP)  Implementation of Local Channel Authentication. Local

150 karl  1.49.2.8     Authentication provides security mechanism to authenticates CIM clients
151                    that
152                    connect to CIM Server on the same system without having to specify a
153                    password.
154                    Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
155                    This component only works on unix and it's not linked in with the main
156                    build.
157                    When authentication framework is defined this component may need to be

158 kumpf 1.49.2.6     modified to integrate with the framework.
159                 

160 kumpf 1.49.2.7  8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
161                    Added a constant to define the maximum length of uint32.

162 kumpf 1.49.2.6  

163 karl  1.49      ---------------------------------------------------------------------------
164                 Version 0.99.x (Fixes to version 0.99) in Process

165 karl  1.49.2.5  

166 karl  1.49      NOTE: Please do not input anything to this branch except for critical
167                 fixes.  This is, in effect, 1.0 and we do not want to use it for
168                 development.
169                 
170                 ----------------------------------------------------------------------------
171                 
172                 Version 0.98.0 - Work in progress (This number skipped)

173 karl  1.48      Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS

174 mike  1.36      

175 karl  1.38      1. (Mike Brasher) Added support for class association operations

176 mike  1.37          (references(), associators(), referenceNames(), associatorNames()).
177                 

178 kumpf 1.39      2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
179                    in the HTML URL reference for passing instance names.
180                 

181 mike  1.41      3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
182                 
183                 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
184                 

185 kumpf 1.40      3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
186                    allow slp to compile.
187                 

188 mike  1.42      4. (Mike Brasher) - Finalized CIM messages.
189                 
190                 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
191                    ids to queue pointers).
192                 

193 mike  1.43      6. (Mike Brasher) - Started integration of message queues with ServerHandler
194                    and Dispatcher.
195                 

196 karl  1.48      7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
197                 and
198                    CIMProvider to support both interfaces. Added CIMOMHandle and sample

199 chip  1.44         ResponseHandler for Provider2 interface.

200 mike  1.45      
201                 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
202                 
203                 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
204                 

205 mike  1.46      10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
206                 

207 mike  1.47      11. (Mike Brasher) - Ported to TRU64.
208                 
209                 12. (Mike Brasher) - Fixed compiler error on Linux.
210                 

211 karl  1.38      ------------------------------------------------------------------------------
212                 --

213 mike  1.26      

214 karl  1.35      Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001

215 karl  1.16      
216                 1. Deamonizaiton added to CIMServer.cpp by Mike Day.  This includes code bothe
217                 for NT and Linux platforms.

218 mike  1.26      

219 karl  1.17      2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
220                 5988.
221                 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
222                 the DMTF.

223 mike  1.26      

224 karl  1.17      3. KS Corrected some errors found in interoperability testing during the DMTF
225                 Fusion event.  THis included a) extended the test for end of HTTP header from
226                 CR/LF/CR/LF to also allow LF/LF.  Not strictly legal but widely used. b).
227                 Extended the HTTP message ID to allow for non-numeric message IDs.

228 mike  1.26      

229 bob   1.18      4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
230                 and created RepositoryDeclContext.{cpp,h}.  This is the first step in
231                 revamping the compiler to work independently of the repository (grb).

232 mike  1.26      

233 bob   1.19      5. Created new makefile Compiler/Makefile.grammar and modified
234                 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
235                 Now when you build normally, you will get the committed grammar and parser
236                 files instead of generating your own for a particular platform.  This should
237                 prevent back-level lex and yacc implementations from generating troublesome
238                 code.  The committed files are generated from flex 2.5.4 and bison 1,28.

239 bob   1.20      (grb)

240 mike  1.26      

241 bob   1.20      6.  Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
242                 This change paves the way for upcoming changes that will allow the compiler
243                 to work indepently of the repository. (grb)

244 mike  1.26      

245 karl  1.21      7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001

246 mike  1.26      

247 karl  1.25      8. CV added const to CIMOperations modifyInstance, createInstance,
248                 modifyClass,

249 chip  1.22      createClass to protect caller's object.

250 mike  1.26      

251 karl  1.25      9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
252                 directory. These
253                 interfaces allow very smart providers to perform advances operations.
254                 CIMProviderStub has

255 chip  1.23      been updated to support the new interfaces. Needs testing.

256 mike  1.26      

257 sage  1.24      10. Added rpm packaging support and shell script based build process. MM

258 mike  1.26      

259 karl  1.25      11. Changed Make so make tests no longer rebuilds repository.  To rebuild
260                 repository you make world, make rebuild or make repository. ks

261 mike  1.26      
262                 12. Added associators() and associatorNames() operations to CIM repository.

263 mike  1.27          (MEB)
264                 
265                 13. More on association implementation (all four operations supported).
266                     Need to handle deletion of associations and protocol stubs still.
267                     Need to test class associations (rather than just instance associations).
268                     Need to handle deleteInstance().
269                     (MEB)

270 mike  1.26      

271 mday  1.28      14. slp client code integrated as pegasus-style c++ library. (MDD)
272                 

273 karl  1.30      15. (Karl)Update CGI Client to correct number of errors and install
274                 AssociationName

275 karl  1.29      and ReferenceName functions.  This included extensive update to the HTML
276                 pages.
277                 

278 karl  1.30      16. (Denise E.) Changes to slp client support code for HPUX (

279 sage  1.31      
280                 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
281                 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
282                 Made cimserver accept the -D flag to eliminate the need for environment
283                 variables.

284 mike  1.32      
285                 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
286                     References() and ReferenceNames() CIM operations. These only operate
287                     on instances at this time. They will operate on classes soon.

288 kumpf 1.34      
289                 19. (Mike Glantz) Extended and modified dynamic support
290                     changes to (1) work on HP-UX and (2) have all images and libraries
291                     buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
292                     change is to program.mak and library-unix.mak, removing specific
293                     lists of dynamic library specs and putting them in the Makefile
294                     and libraries.mak files that build the actual targets (lots of
295                     these now have DYNAMIC_LIBRARIES defined).

296 karl  1.35      
297                 20. (Karl) added basic Queue function to common (based on array) and added
298                     tests for stack and queue.

299 karl  1.38      
300                 ------------------------------------------------------------------------------
301                 --

302 mike  1.36      

303 karl  1.16      Version 0.97.3 - Released 5 June 2001

304 karl  1.11      

305 karl  1.12      1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
306                 CIMServer (both)

307 karl  1.11      Functions added include:
308                 	a. Enable trace to log file.

309 karl  1.12      	b. Add option so that you can trace to console or trace to logfile (-l
310                 	is

311 karl  1.11      	   trace to log, -t is trace to console).
312                 	c. add parameter in optionsrow for help message and enable the capture

313 karl  1.12      	   of these messages in Options class.  Also added help print that
314                 	   prints these things out.  However, format not to beautiful.

315 karl  1.11      	d. Eliminate a couple of messages coming from __Namespace provider.
316                 	e. Extend the Clients\testclient so he does tests on Namespace.

317 karl  1.15      2. (KS)Extended Log to show time, severity.

318 mike  1.33      

319 karl  1.15      3. (KS)Added getCurrentASCIITime functions to System.x

320 mike  1.33      

321 karl  1.15      4. (KS)Extended options on CIMServer including 1. option to determine where
322                 logs

323 karl  1.12      are put

324 mike  1.33      

325 karl  1.15      5. (KS)Added TestClient that executes a series of tests against a server.
326                 This is a preliminary version.

327 mike  1.33      

328 karl  1.15      6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now

329 karl  1.13      throws CannotBind exception.

330 mike  1.33      

331 karl  1.15      7. (KS)Added logger entry to XMLParser for errors.  NOTE: At this point it may
332                 not

333 karl  1.14      print out all of the message.  At the least it prints out the error message
334                 and components of the message causing the problem.

335 mike  1.33      

336 karl  1.15      8. (KS)Added clean option to server but temprarily disabled.

337 mike  1.33      

338 karl  1.15      9. (KS)Fixed problem where logs were not created unless logs directory already

339 karl  1.14      existed.

340 mike  1.33      
341                 10. (Mike Brasher) Added "Test" prefix to all test program names.

342 karl  1.15      

343 karl  1.29      ------------------------------------------------------------------------------
344                 --

345 karl  1.6       Version 0.97.2
346                 
347                 1. Extend HP UX port to correctly load Dynamic Load Libraries.
348                 2. Extend Formatter for Boolean and Uint32 types.
349                 3. Change CIM Server to use Trace (-t) flag.  This also changed
350                    Handler.h to work off of flag.
351                 4. Minor corrections to __Namespace Provider.
352                 5. Extend tests for Formatter, String, and other modules.
353                 6. Correct errors in documentation.
354                 7. New working papers (provider interface).

355 karl  1.8       8. Add Providerreg.exe tool.
356                 9. Add trace output for messages sent from the Server.

357 mike  1.26      

358 karl  1.29      ------------------------------------------------------------------------------
359                 --

360 mike  1.26      

361 karl  1.6       23 May 2001 Version 0.97.1 Tags as version_0_971

362 karl  1.5       

363 karl  1.3       1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
364                 find functions.  Note: This symbol is defined in config.h. (ks).
365                 

366 karl  1.5       2. Port To HP UX.  This required a number of changes particularly in the area
367                 of dynamic lib loaading.

368 karl  1.1       
369                 

370 karl  1.29      ------------------------------------------------------------------------------
371                 --

372 mike  1.26      

373 karl  1.3       21 May 2001  Version 0.97 - Tagged as version_0_97

374 karl  1.1       
375                 1. Added methods in CIMClass, CIMInstance, for existance of properties,
376                 qualifiers, methods.
377                 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
378                 methods.
379                 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
380                 qualifiers and to
381                 remove qualifiers.
382                 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
383                 compiler.  It probably imposed more limitations than would be required with

384 karl  1.2       the current compiler.  This version of the port produces an excessively large
385                 common module due to template bloat.  That problem will be fixed in a future
386                 change to the port. Also there are a log of duplicate symbol warnings generate
387                 by the AIC compiler but these cause no problems.  The port has been tested
388                 with the complete unit test and client/server test successfully.

389 karl  1.1       
390                 --------------------------------------------------------------------------

391 karl  1.2       

392 mike  1.4       23 May 2001

393 karl  1.1       

394 mike  1.9       1.  Ported to HPUX

395 karl  1.5       

396 mike  1.9       --------------------------------------------------------------------------
397                 
398                 29 May 2001
399                 
400                 1.  Implemented CIMRepository::setProperty() and CIMRepository::getProperty().

401 karl  1.49.2.8  

402 karl  1.49.2.5  
403                 
404                 

405 karl  1.48      

406 karl  1.38      

407 karl  1.30      

408 karl  1.29      

409 mike  1.10