1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 mike 1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
62
|
63 kumpf 1.49.2.21 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
64
|
65 sage 1.49.2.22 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
66
|
67 kumpf 1.49.2.23 19. (Warren Otsuka - HP) 14 Sep 2001 - Implementation of servlet web server
68 interface to CIMServer.This is for the PEGASUS CIM Server to coexist with
69 a web server. See doc/Servlet for more information.
70
|
71 karl 1.49 ---------------------------------------------------------------------------
|
72 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
73 Tagged as version_1_01 on 3 August 2001 (sorry should have been
74 1.1
|
75 karl 1.49
|
76 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
77 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
78 and ExportClient classes. the indication.
|
79 kumpf 1.49.2.1
|
80 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
81 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
82
|
83 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
84 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
85 karl 1.49
|
86 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
87 library and a thread-safe message queue (first stage). Classes defined
88 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
89 and SimpleThread.
90
|
91 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
92 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
93 information on using wbemexec. A simple test script is included. Please
94 see pegasus/src/Clients/wbemexec/tests/readme for information on running
95 the test script.
|
96 kumpf 1.49.2.3
|
97 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
98 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
99 and
|
100 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
101 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
102 src/Pegasus/Common/TraceFileHandler.cpp.
|
103 kumpf 1.49.2.3
|
104 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
105 Config CLI. Please refer to the documentation
106 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
107 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
108 using the config framework and cimconfig CLI. Make sure to load the config
109 mof (src/gmake config) before starting the cimserver. A simple test script
|
110 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
111 kumpf 1.49.2.4 information on running the test script.
|
112 karl 1.49.2.5
113 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
114 (changed the H and CPP files for the major CIM objects. These
115 functions generate CIM MOF output for the objects.
116
|
117 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
118 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
119 that
120 connect to CIM Server on the same system without having to specify a
121 password.
122 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
123 This component only works on unix and it's not linked in with the main
124 build.
125 When authentication framework is defined this component may need to be
|
126 kumpf 1.49.2.6 modified to integrate with the framework.
127
|
128 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
129 Added a constant to define the maximum length of uint32.
|
130 kumpf 1.49.2.6
|
131 karl 1.49 ---------------------------------------------------------------------------
132 Version 0.99.x (Fixes to version 0.99) in Process
|
133 karl 1.49.2.5
|
134 karl 1.49 NOTE: Please do not input anything to this branch except for critical
135 fixes. This is, in effect, 1.0 and we do not want to use it for
136 development.
137
138 ----------------------------------------------------------------------------
139
140 Version 0.98.0 - Work in progress (This number skipped)
|
141 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
142 mike 1.36
|
143 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
144 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
145
|
146 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
147 in the HTML URL reference for passing instance names.
148
|
149 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
150
151 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
152
|
153 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
154 allow slp to compile.
155
|
156 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
157
158 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
159 ids to queue pointers).
160
|
161 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
162 and Dispatcher.
163
|
164 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
165 and
166 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
167 chip 1.44 ResponseHandler for Provider2 interface.
|
168 mike 1.45
169 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
170
171 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
172
|
173 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
174
|
175 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
176
177 12. (Mike Brasher) - Fixed compiler error on Linux.
178
|
179 karl 1.38 ------------------------------------------------------------------------------
180 --
|
181 mike 1.26
|
182 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
183 karl 1.16
184 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
185 for NT and Linux platforms.
|
186 mike 1.26
|
187 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
188 5988.
189 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
190 the DMTF.
|
191 mike 1.26
|
192 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
193 Fusion event. THis included a) extended the test for end of HTTP header from
194 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
195 Extended the HTTP message ID to allow for non-numeric message IDs.
|
196 mike 1.26
|
197 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
198 and created RepositoryDeclContext.{cpp,h}. This is the first step in
199 revamping the compiler to work independently of the repository (grb).
|
200 mike 1.26
|
201 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
202 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
203 Now when you build normally, you will get the committed grammar and parser
204 files instead of generating your own for a particular platform. This should
205 prevent back-level lex and yacc implementations from generating troublesome
206 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
207 bob 1.20 (grb)
|
208 mike 1.26
|
209 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
210 This change paves the way for upcoming changes that will allow the compiler
211 to work indepently of the repository. (grb)
|
212 mike 1.26
|
213 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
214 mike 1.26
|
215 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
216 modifyClass,
|
217 chip 1.22 createClass to protect caller's object.
|
218 mike 1.26
|
219 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
220 directory. These
221 interfaces allow very smart providers to perform advances operations.
222 CIMProviderStub has
|
223 chip 1.23 been updated to support the new interfaces. Needs testing.
|
224 mike 1.26
|
225 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
226 mike 1.26
|
227 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
228 repository you make world, make rebuild or make repository. ks
|
229 mike 1.26
230 12. Added associators() and associatorNames() operations to CIM repository.
|
231 mike 1.27 (MEB)
232
233 13. More on association implementation (all four operations supported).
234 Need to handle deletion of associations and protocol stubs still.
235 Need to test class associations (rather than just instance associations).
236 Need to handle deleteInstance().
237 (MEB)
|
238 mike 1.26
|
239 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
240
|
241 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
242 AssociationName
|
243 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
244 pages.
245
|
246 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
247 sage 1.31
248 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
249 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
250 Made cimserver accept the -D flag to eliminate the need for environment
251 variables.
|
252 mike 1.32
253 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
254 References() and ReferenceNames() CIM operations. These only operate
255 on instances at this time. They will operate on classes soon.
|
256 kumpf 1.34
257 19. (Mike Glantz) Extended and modified dynamic support
258 changes to (1) work on HP-UX and (2) have all images and libraries
259 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
260 change is to program.mak and library-unix.mak, removing specific
261 lists of dynamic library specs and putting them in the Makefile
262 and libraries.mak files that build the actual targets (lots of
263 these now have DYNAMIC_LIBRARIES defined).
|
264 karl 1.35
265 20. (Karl) added basic Queue function to common (based on array) and added
266 tests for stack and queue.
|
267 karl 1.38
268 ------------------------------------------------------------------------------
269 --
|
270 mike 1.36
|
271 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
272 karl 1.11
|
273 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
274 CIMServer (both)
|
275 karl 1.11 Functions added include:
276 a. Enable trace to log file.
|
277 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
278 is
|
279 karl 1.11 trace to log, -t is trace to console).
280 c. add parameter in optionsrow for help message and enable the capture
|
281 karl 1.12 of these messages in Options class. Also added help print that
282 prints these things out. However, format not to beautiful.
|
283 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
284 e. Extend the Clients\testclient so he does tests on Namespace.
|
285 karl 1.15 2. (KS)Extended Log to show time, severity.
|
286 mike 1.33
|
287 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
288 mike 1.33
|
289 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
290 logs
|
291 karl 1.12 are put
|
292 mike 1.33
|
293 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
294 This is a preliminary version.
|
295 mike 1.33
|
296 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
297 karl 1.13 throws CannotBind exception.
|
298 mike 1.33
|
299 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
300 not
|
301 karl 1.14 print out all of the message. At the least it prints out the error message
302 and components of the message causing the problem.
|
303 mike 1.33
|
304 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
305 mike 1.33
|
306 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
307 karl 1.14 existed.
|
308 mike 1.33
309 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
310 karl 1.15
|
311 karl 1.29 ------------------------------------------------------------------------------
312 --
|
313 karl 1.6 Version 0.97.2
314
315 1. Extend HP UX port to correctly load Dynamic Load Libraries.
316 2. Extend Formatter for Boolean and Uint32 types.
317 3. Change CIM Server to use Trace (-t) flag. This also changed
318 Handler.h to work off of flag.
319 4. Minor corrections to __Namespace Provider.
320 5. Extend tests for Formatter, String, and other modules.
321 6. Correct errors in documentation.
322 7. New working papers (provider interface).
|
323 karl 1.8 8. Add Providerreg.exe tool.
324 9. Add trace output for messages sent from the Server.
|
325 mike 1.26
|
326 karl 1.29 ------------------------------------------------------------------------------
327 --
|
328 mike 1.26
|
329 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
330 karl 1.5
|
331 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
332 find functions. Note: This symbol is defined in config.h. (ks).
333
|
334 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
335 of dynamic lib loaading.
|
336 karl 1.1
337
|
338 karl 1.29 ------------------------------------------------------------------------------
339 --
|
340 mike 1.26
|
341 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
342 karl 1.1
343 1. Added methods in CIMClass, CIMInstance, for existance of properties,
344 qualifiers, methods.
345 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
346 methods.
347 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
348 qualifiers and to
349 remove qualifiers.
350 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
351 compiler. It probably imposed more limitations than would be required with
|
352 karl 1.2 the current compiler. This version of the port produces an excessively large
353 common module due to template bloat. That problem will be fixed in a future
354 change to the port. Also there are a log of duplicate symbol warnings generate
355 by the AIC compiler but these cause no problems. The port has been tested
356 with the complete unit test and client/server test successfully.
|
357 karl 1.1
358 --------------------------------------------------------------------------
|
359 karl 1.2
|
360 mike 1.4 23 May 2001
|
361 karl 1.1
|
362 mike 1.9 1. Ported to HPUX
|
363 karl 1.5
|
364 mike 1.9 --------------------------------------------------------------------------
365
366 29 May 2001
367
368 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
369 karl 1.49.2.8
|
370 karl 1.49.2.5
371
372
|
373 karl 1.48
|
374 karl 1.38
|
375 karl 1.30
|
376 karl 1.29
|
377 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc