1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 mike 1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
62
|
63 kumpf 1.49.2.21 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
64
|
65 sage 1.49.2.22 18. (Markus Mueller - IBM) 13 Sep 2001 - Initial support for z/OS on z/Series, the successor of OS/390 and MVS.
66
|
67 karl 1.49 ---------------------------------------------------------------------------
|
68 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
69 Tagged as version_1_01 on 3 August 2001 (sorry should have been
70 1.1
|
71 karl 1.49
|
72 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
73 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
74 and ExportClient classes. the indication.
|
75 kumpf 1.49.2.1
|
76 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
77 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
78
|
79 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
80 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
81 karl 1.49
|
82 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
83 library and a thread-safe message queue (first stage). Classes defined
84 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
85 and SimpleThread.
86
|
87 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
88 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
89 information on using wbemexec. A simple test script is included. Please
90 see pegasus/src/Clients/wbemexec/tests/readme for information on running
91 the test script.
|
92 kumpf 1.49.2.3
|
93 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
94 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
95 and
|
96 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
97 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
98 src/Pegasus/Common/TraceFileHandler.cpp.
|
99 kumpf 1.49.2.3
|
100 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
101 Config CLI. Please refer to the documentation
102 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
103 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
104 using the config framework and cimconfig CLI. Make sure to load the config
105 mof (src/gmake config) before starting the cimserver. A simple test script
|
106 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
107 kumpf 1.49.2.4 information on running the test script.
|
108 karl 1.49.2.5
109 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
110 (changed the H and CPP files for the major CIM objects. These
111 functions generate CIM MOF output for the objects.
112
|
113 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
114 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
115 that
116 connect to CIM Server on the same system without having to specify a
117 password.
118 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
119 This component only works on unix and it's not linked in with the main
120 build.
121 When authentication framework is defined this component may need to be
|
122 kumpf 1.49.2.6 modified to integrate with the framework.
123
|
124 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
125 Added a constant to define the maximum length of uint32.
|
126 kumpf 1.49.2.6
|
127 karl 1.49 ---------------------------------------------------------------------------
128 Version 0.99.x (Fixes to version 0.99) in Process
|
129 karl 1.49.2.5
|
130 karl 1.49 NOTE: Please do not input anything to this branch except for critical
131 fixes. This is, in effect, 1.0 and we do not want to use it for
132 development.
133
134 ----------------------------------------------------------------------------
135
136 Version 0.98.0 - Work in progress (This number skipped)
|
137 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
138 mike 1.36
|
139 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
140 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
141
|
142 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
143 in the HTML URL reference for passing instance names.
144
|
145 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
146
147 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
148
|
149 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
150 allow slp to compile.
151
|
152 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
153
154 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
155 ids to queue pointers).
156
|
157 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
158 and Dispatcher.
159
|
160 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
161 and
162 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
163 chip 1.44 ResponseHandler for Provider2 interface.
|
164 mike 1.45
165 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
166
167 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
168
|
169 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
170
|
171 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
172
173 12. (Mike Brasher) - Fixed compiler error on Linux.
174
|
175 karl 1.38 ------------------------------------------------------------------------------
176 --
|
177 mike 1.26
|
178 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
179 karl 1.16
180 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
181 for NT and Linux platforms.
|
182 mike 1.26
|
183 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
184 5988.
185 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
186 the DMTF.
|
187 mike 1.26
|
188 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
189 Fusion event. THis included a) extended the test for end of HTTP header from
190 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
191 Extended the HTTP message ID to allow for non-numeric message IDs.
|
192 mike 1.26
|
193 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
194 and created RepositoryDeclContext.{cpp,h}. This is the first step in
195 revamping the compiler to work independently of the repository (grb).
|
196 mike 1.26
|
197 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
198 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
199 Now when you build normally, you will get the committed grammar and parser
200 files instead of generating your own for a particular platform. This should
201 prevent back-level lex and yacc implementations from generating troublesome
202 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
203 bob 1.20 (grb)
|
204 mike 1.26
|
205 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
206 This change paves the way for upcoming changes that will allow the compiler
207 to work indepently of the repository. (grb)
|
208 mike 1.26
|
209 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
210 mike 1.26
|
211 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
212 modifyClass,
|
213 chip 1.22 createClass to protect caller's object.
|
214 mike 1.26
|
215 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
216 directory. These
217 interfaces allow very smart providers to perform advances operations.
218 CIMProviderStub has
|
219 chip 1.23 been updated to support the new interfaces. Needs testing.
|
220 mike 1.26
|
221 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
222 mike 1.26
|
223 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
224 repository you make world, make rebuild or make repository. ks
|
225 mike 1.26
226 12. Added associators() and associatorNames() operations to CIM repository.
|
227 mike 1.27 (MEB)
228
229 13. More on association implementation (all four operations supported).
230 Need to handle deletion of associations and protocol stubs still.
231 Need to test class associations (rather than just instance associations).
232 Need to handle deleteInstance().
233 (MEB)
|
234 mike 1.26
|
235 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
236
|
237 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
238 AssociationName
|
239 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
240 pages.
241
|
242 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
243 sage 1.31
244 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
245 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
246 Made cimserver accept the -D flag to eliminate the need for environment
247 variables.
|
248 mike 1.32
249 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
250 References() and ReferenceNames() CIM operations. These only operate
251 on instances at this time. They will operate on classes soon.
|
252 kumpf 1.34
253 19. (Mike Glantz) Extended and modified dynamic support
254 changes to (1) work on HP-UX and (2) have all images and libraries
255 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
256 change is to program.mak and library-unix.mak, removing specific
257 lists of dynamic library specs and putting them in the Makefile
258 and libraries.mak files that build the actual targets (lots of
259 these now have DYNAMIC_LIBRARIES defined).
|
260 karl 1.35
261 20. (Karl) added basic Queue function to common (based on array) and added
262 tests for stack and queue.
|
263 karl 1.38
264 ------------------------------------------------------------------------------
265 --
|
266 mike 1.36
|
267 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
268 karl 1.11
|
269 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
270 CIMServer (both)
|
271 karl 1.11 Functions added include:
272 a. Enable trace to log file.
|
273 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
274 is
|
275 karl 1.11 trace to log, -t is trace to console).
276 c. add parameter in optionsrow for help message and enable the capture
|
277 karl 1.12 of these messages in Options class. Also added help print that
278 prints these things out. However, format not to beautiful.
|
279 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
280 e. Extend the Clients\testclient so he does tests on Namespace.
|
281 karl 1.15 2. (KS)Extended Log to show time, severity.
|
282 mike 1.33
|
283 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
284 mike 1.33
|
285 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
286 logs
|
287 karl 1.12 are put
|
288 mike 1.33
|
289 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
290 This is a preliminary version.
|
291 mike 1.33
|
292 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
293 karl 1.13 throws CannotBind exception.
|
294 mike 1.33
|
295 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
296 not
|
297 karl 1.14 print out all of the message. At the least it prints out the error message
298 and components of the message causing the problem.
|
299 mike 1.33
|
300 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
301 mike 1.33
|
302 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
303 karl 1.14 existed.
|
304 mike 1.33
305 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
306 karl 1.15
|
307 karl 1.29 ------------------------------------------------------------------------------
308 --
|
309 karl 1.6 Version 0.97.2
310
311 1. Extend HP UX port to correctly load Dynamic Load Libraries.
312 2. Extend Formatter for Boolean and Uint32 types.
313 3. Change CIM Server to use Trace (-t) flag. This also changed
314 Handler.h to work off of flag.
315 4. Minor corrections to __Namespace Provider.
316 5. Extend tests for Formatter, String, and other modules.
317 6. Correct errors in documentation.
318 7. New working papers (provider interface).
|
319 karl 1.8 8. Add Providerreg.exe tool.
320 9. Add trace output for messages sent from the Server.
|
321 mike 1.26
|
322 karl 1.29 ------------------------------------------------------------------------------
323 --
|
324 mike 1.26
|
325 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
326 karl 1.5
|
327 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
328 find functions. Note: This symbol is defined in config.h. (ks).
329
|
330 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
331 of dynamic lib loaading.
|
332 karl 1.1
333
|
334 karl 1.29 ------------------------------------------------------------------------------
335 --
|
336 mike 1.26
|
337 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
338 karl 1.1
339 1. Added methods in CIMClass, CIMInstance, for existance of properties,
340 qualifiers, methods.
341 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
342 methods.
343 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
344 qualifiers and to
345 remove qualifiers.
346 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
347 compiler. It probably imposed more limitations than would be required with
|
348 karl 1.2 the current compiler. This version of the port produces an excessively large
349 common module due to template bloat. That problem will be fixed in a future
350 change to the port. Also there are a log of duplicate symbol warnings generate
351 by the AIC compiler but these cause no problems. The port has been tested
352 with the complete unit test and client/server test successfully.
|
353 karl 1.1
354 --------------------------------------------------------------------------
|
355 karl 1.2
|
356 mike 1.4 23 May 2001
|
357 karl 1.1
|
358 mike 1.9 1. Ported to HPUX
|
359 karl 1.5
|
360 mike 1.9 --------------------------------------------------------------------------
361
362 29 May 2001
363
364 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
365 karl 1.49.2.8
|
366 karl 1.49.2.5
367
368
|
369 karl 1.48
|
370 karl 1.38
|
371 karl 1.30
|
372 karl 1.29
|
373 mike 1.10
|