1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 mike 1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
62
|
63 kumpf 1.49.2.21 17. (Jim Chou - HP) 12 Sep 2001 - Initial contribution of wbemexec test directory and make infrastructure. This submittal also includes an initial set of test scripts.
64
|
65 karl 1.49 ---------------------------------------------------------------------------
|
66 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
67 Tagged as version_1_01 on 3 August 2001 (sorry should have been
68 1.1
|
69 karl 1.49
|
70 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
71 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
72 and ExportClient classes. the indication.
|
73 kumpf 1.49.2.1
|
74 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
75 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
76
|
77 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
78 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
79 karl 1.49
|
80 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
81 library and a thread-safe message queue (first stage). Classes defined
82 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
83 and SimpleThread.
84
|
85 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
86 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
87 information on using wbemexec. A simple test script is included. Please
88 see pegasus/src/Clients/wbemexec/tests/readme for information on running
89 the test script.
|
90 kumpf 1.49.2.3
|
91 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
92 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
93 and
|
94 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
95 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
96 src/Pegasus/Common/TraceFileHandler.cpp.
|
97 kumpf 1.49.2.3
|
98 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
99 Config CLI. Please refer to the documentation
100 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
101 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
102 using the config framework and cimconfig CLI. Make sure to load the config
103 mof (src/gmake config) before starting the cimserver. A simple test script
|
104 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
105 kumpf 1.49.2.4 information on running the test script.
|
106 karl 1.49.2.5
107 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
108 (changed the H and CPP files for the major CIM objects. These
109 functions generate CIM MOF output for the objects.
110
|
111 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
112 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
113 that
114 connect to CIM Server on the same system without having to specify a
115 password.
116 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
117 This component only works on unix and it's not linked in with the main
118 build.
119 When authentication framework is defined this component may need to be
|
120 kumpf 1.49.2.6 modified to integrate with the framework.
121
|
122 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
123 Added a constant to define the maximum length of uint32.
|
124 kumpf 1.49.2.6
|
125 karl 1.49 ---------------------------------------------------------------------------
126 Version 0.99.x (Fixes to version 0.99) in Process
|
127 karl 1.49.2.5
|
128 karl 1.49 NOTE: Please do not input anything to this branch except for critical
129 fixes. This is, in effect, 1.0 and we do not want to use it for
130 development.
131
132 ----------------------------------------------------------------------------
133
134 Version 0.98.0 - Work in progress (This number skipped)
|
135 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
136 mike 1.36
|
137 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
138 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
139
|
140 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
141 in the HTML URL reference for passing instance names.
142
|
143 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
144
145 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
146
|
147 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
148 allow slp to compile.
149
|
150 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
151
152 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
153 ids to queue pointers).
154
|
155 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
156 and Dispatcher.
157
|
158 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
159 and
160 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
161 chip 1.44 ResponseHandler for Provider2 interface.
|
162 mike 1.45
163 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
164
165 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
166
|
167 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
168
|
169 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
170
171 12. (Mike Brasher) - Fixed compiler error on Linux.
172
|
173 karl 1.38 ------------------------------------------------------------------------------
174 --
|
175 mike 1.26
|
176 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
177 karl 1.16
178 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
179 for NT and Linux platforms.
|
180 mike 1.26
|
181 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
182 5988.
183 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
184 the DMTF.
|
185 mike 1.26
|
186 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
187 Fusion event. THis included a) extended the test for end of HTTP header from
188 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
189 Extended the HTTP message ID to allow for non-numeric message IDs.
|
190 mike 1.26
|
191 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
192 and created RepositoryDeclContext.{cpp,h}. This is the first step in
193 revamping the compiler to work independently of the repository (grb).
|
194 mike 1.26
|
195 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
196 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
197 Now when you build normally, you will get the committed grammar and parser
198 files instead of generating your own for a particular platform. This should
199 prevent back-level lex and yacc implementations from generating troublesome
200 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
201 bob 1.20 (grb)
|
202 mike 1.26
|
203 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
204 This change paves the way for upcoming changes that will allow the compiler
205 to work indepently of the repository. (grb)
|
206 mike 1.26
|
207 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
208 mike 1.26
|
209 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
210 modifyClass,
|
211 chip 1.22 createClass to protect caller's object.
|
212 mike 1.26
|
213 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
214 directory. These
215 interfaces allow very smart providers to perform advances operations.
216 CIMProviderStub has
|
217 chip 1.23 been updated to support the new interfaces. Needs testing.
|
218 mike 1.26
|
219 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
220 mike 1.26
|
221 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
222 repository you make world, make rebuild or make repository. ks
|
223 mike 1.26
224 12. Added associators() and associatorNames() operations to CIM repository.
|
225 mike 1.27 (MEB)
226
227 13. More on association implementation (all four operations supported).
228 Need to handle deletion of associations and protocol stubs still.
229 Need to test class associations (rather than just instance associations).
230 Need to handle deleteInstance().
231 (MEB)
|
232 mike 1.26
|
233 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
234
|
235 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
236 AssociationName
|
237 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
238 pages.
239
|
240 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
241 sage 1.31
242 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
243 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
244 Made cimserver accept the -D flag to eliminate the need for environment
245 variables.
|
246 mike 1.32
247 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
248 References() and ReferenceNames() CIM operations. These only operate
249 on instances at this time. They will operate on classes soon.
|
250 kumpf 1.34
251 19. (Mike Glantz) Extended and modified dynamic support
252 changes to (1) work on HP-UX and (2) have all images and libraries
253 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
254 change is to program.mak and library-unix.mak, removing specific
255 lists of dynamic library specs and putting them in the Makefile
256 and libraries.mak files that build the actual targets (lots of
257 these now have DYNAMIC_LIBRARIES defined).
|
258 karl 1.35
259 20. (Karl) added basic Queue function to common (based on array) and added
260 tests for stack and queue.
|
261 karl 1.38
262 ------------------------------------------------------------------------------
263 --
|
264 mike 1.36
|
265 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
266 karl 1.11
|
267 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
268 CIMServer (both)
|
269 karl 1.11 Functions added include:
270 a. Enable trace to log file.
|
271 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
272 is
|
273 karl 1.11 trace to log, -t is trace to console).
274 c. add parameter in optionsrow for help message and enable the capture
|
275 karl 1.12 of these messages in Options class. Also added help print that
276 prints these things out. However, format not to beautiful.
|
277 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
278 e. Extend the Clients\testclient so he does tests on Namespace.
|
279 karl 1.15 2. (KS)Extended Log to show time, severity.
|
280 mike 1.33
|
281 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
282 mike 1.33
|
283 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
284 logs
|
285 karl 1.12 are put
|
286 mike 1.33
|
287 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
288 This is a preliminary version.
|
289 mike 1.33
|
290 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
291 karl 1.13 throws CannotBind exception.
|
292 mike 1.33
|
293 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
294 not
|
295 karl 1.14 print out all of the message. At the least it prints out the error message
296 and components of the message causing the problem.
|
297 mike 1.33
|
298 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
299 mike 1.33
|
300 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
301 karl 1.14 existed.
|
302 mike 1.33
303 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
304 karl 1.15
|
305 karl 1.29 ------------------------------------------------------------------------------
306 --
|
307 karl 1.6 Version 0.97.2
308
309 1. Extend HP UX port to correctly load Dynamic Load Libraries.
310 2. Extend Formatter for Boolean and Uint32 types.
311 3. Change CIM Server to use Trace (-t) flag. This also changed
312 Handler.h to work off of flag.
313 4. Minor corrections to __Namespace Provider.
314 5. Extend tests for Formatter, String, and other modules.
315 6. Correct errors in documentation.
316 7. New working papers (provider interface).
|
317 karl 1.8 8. Add Providerreg.exe tool.
318 9. Add trace output for messages sent from the Server.
|
319 mike 1.26
|
320 karl 1.29 ------------------------------------------------------------------------------
321 --
|
322 mike 1.26
|
323 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
324 karl 1.5
|
325 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
326 find functions. Note: This symbol is defined in config.h. (ks).
327
|
328 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
329 of dynamic lib loaading.
|
330 karl 1.1
331
|
332 karl 1.29 ------------------------------------------------------------------------------
333 --
|
334 mike 1.26
|
335 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
336 karl 1.1
337 1. Added methods in CIMClass, CIMInstance, for existance of properties,
338 qualifiers, methods.
339 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
340 methods.
341 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
342 qualifiers and to
343 remove qualifiers.
344 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
345 compiler. It probably imposed more limitations than would be required with
|
346 karl 1.2 the current compiler. This version of the port produces an excessively large
347 common module due to template bloat. That problem will be fixed in a future
348 change to the port. Also there are a log of duplicate symbol warnings generate
349 by the AIC compiler but these cause no problems. The port has been tested
350 with the complete unit test and client/server test successfully.
|
351 karl 1.1
352 --------------------------------------------------------------------------
|
353 karl 1.2
|
354 mike 1.4 23 May 2001
|
355 karl 1.1
|
356 mike 1.9 1. Ported to HPUX
|
357 karl 1.5
|
358 mike 1.9 --------------------------------------------------------------------------
359
360 29 May 2001
361
362 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
363 karl 1.49.2.8
|
364 karl 1.49.2.5
365
366
|
367 karl 1.48
|
368 karl 1.38
|
369 karl 1.30
|
370 karl 1.29
|
371 mike 1.10
|