1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 mike 1.49.2.20 16. (Mike Brasher) - queue-based clients now complete.
62
|
63 karl 1.49 ---------------------------------------------------------------------------
|
64 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
65 Tagged as version_1_01 on 3 August 2001 (sorry should have been
66 1.1
|
67 karl 1.49
|
68 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
69 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
70 and ExportClient classes. the indication.
|
71 kumpf 1.49.2.1
|
72 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
73 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
74
|
75 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
76 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
77 karl 1.49
|
78 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
79 library and a thread-safe message queue (first stage). Classes defined
80 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
81 and SimpleThread.
82
|
83 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
84 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
85 information on using wbemexec. A simple test script is included. Please
86 see pegasus/src/Clients/wbemexec/tests/readme for information on running
87 the test script.
|
88 kumpf 1.49.2.3
|
89 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
90 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
91 and
|
92 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
93 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
94 src/Pegasus/Common/TraceFileHandler.cpp.
|
95 kumpf 1.49.2.3
|
96 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
97 Config CLI. Please refer to the documentation
98 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
99 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
100 using the config framework and cimconfig CLI. Make sure to load the config
101 mof (src/gmake config) before starting the cimserver. A simple test script
|
102 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
103 kumpf 1.49.2.4 information on running the test script.
|
104 karl 1.49.2.5
105 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
106 (changed the H and CPP files for the major CIM objects. These
107 functions generate CIM MOF output for the objects.
108
|
109 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
110 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
111 that
112 connect to CIM Server on the same system without having to specify a
113 password.
114 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
115 This component only works on unix and it's not linked in with the main
116 build.
117 When authentication framework is defined this component may need to be
|
118 kumpf 1.49.2.6 modified to integrate with the framework.
119
|
120 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
121 Added a constant to define the maximum length of uint32.
|
122 kumpf 1.49.2.6
|
123 karl 1.49 ---------------------------------------------------------------------------
124 Version 0.99.x (Fixes to version 0.99) in Process
|
125 karl 1.49.2.5
|
126 karl 1.49 NOTE: Please do not input anything to this branch except for critical
127 fixes. This is, in effect, 1.0 and we do not want to use it for
128 development.
129
130 ----------------------------------------------------------------------------
131
132 Version 0.98.0 - Work in progress (This number skipped)
|
133 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
134 mike 1.36
|
135 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
136 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
137
|
138 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
139 in the HTML URL reference for passing instance names.
140
|
141 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
142
143 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
144
|
145 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
146 allow slp to compile.
147
|
148 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
149
150 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
151 ids to queue pointers).
152
|
153 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
154 and Dispatcher.
155
|
156 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
157 and
158 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
159 chip 1.44 ResponseHandler for Provider2 interface.
|
160 mike 1.45
161 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
162
163 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
164
|
165 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
166
|
167 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
168
169 12. (Mike Brasher) - Fixed compiler error on Linux.
170
|
171 karl 1.38 ------------------------------------------------------------------------------
172 --
|
173 mike 1.26
|
174 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
175 karl 1.16
176 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
177 for NT and Linux platforms.
|
178 mike 1.26
|
179 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
180 5988.
181 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
182 the DMTF.
|
183 mike 1.26
|
184 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
185 Fusion event. THis included a) extended the test for end of HTTP header from
186 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
187 Extended the HTTP message ID to allow for non-numeric message IDs.
|
188 mike 1.26
|
189 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
190 and created RepositoryDeclContext.{cpp,h}. This is the first step in
191 revamping the compiler to work independently of the repository (grb).
|
192 mike 1.26
|
193 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
194 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
195 Now when you build normally, you will get the committed grammar and parser
196 files instead of generating your own for a particular platform. This should
197 prevent back-level lex and yacc implementations from generating troublesome
198 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
199 bob 1.20 (grb)
|
200 mike 1.26
|
201 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
202 This change paves the way for upcoming changes that will allow the compiler
203 to work indepently of the repository. (grb)
|
204 mike 1.26
|
205 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
206 mike 1.26
|
207 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
208 modifyClass,
|
209 chip 1.22 createClass to protect caller's object.
|
210 mike 1.26
|
211 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
212 directory. These
213 interfaces allow very smart providers to perform advances operations.
214 CIMProviderStub has
|
215 chip 1.23 been updated to support the new interfaces. Needs testing.
|
216 mike 1.26
|
217 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
218 mike 1.26
|
219 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
220 repository you make world, make rebuild or make repository. ks
|
221 mike 1.26
222 12. Added associators() and associatorNames() operations to CIM repository.
|
223 mike 1.27 (MEB)
224
225 13. More on association implementation (all four operations supported).
226 Need to handle deletion of associations and protocol stubs still.
227 Need to test class associations (rather than just instance associations).
228 Need to handle deleteInstance().
229 (MEB)
|
230 mike 1.26
|
231 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
232
|
233 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
234 AssociationName
|
235 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
236 pages.
237
|
238 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
239 sage 1.31
240 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
241 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
242 Made cimserver accept the -D flag to eliminate the need for environment
243 variables.
|
244 mike 1.32
245 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
246 References() and ReferenceNames() CIM operations. These only operate
247 on instances at this time. They will operate on classes soon.
|
248 kumpf 1.34
249 19. (Mike Glantz) Extended and modified dynamic support
250 changes to (1) work on HP-UX and (2) have all images and libraries
251 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
252 change is to program.mak and library-unix.mak, removing specific
253 lists of dynamic library specs and putting them in the Makefile
254 and libraries.mak files that build the actual targets (lots of
255 these now have DYNAMIC_LIBRARIES defined).
|
256 karl 1.35
257 20. (Karl) added basic Queue function to common (based on array) and added
258 tests for stack and queue.
|
259 karl 1.38
260 ------------------------------------------------------------------------------
261 --
|
262 mike 1.36
|
263 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
264 karl 1.11
|
265 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
266 CIMServer (both)
|
267 karl 1.11 Functions added include:
268 a. Enable trace to log file.
|
269 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
270 is
|
271 karl 1.11 trace to log, -t is trace to console).
272 c. add parameter in optionsrow for help message and enable the capture
|
273 karl 1.12 of these messages in Options class. Also added help print that
274 prints these things out. However, format not to beautiful.
|
275 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
276 e. Extend the Clients\testclient so he does tests on Namespace.
|
277 karl 1.15 2. (KS)Extended Log to show time, severity.
|
278 mike 1.33
|
279 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
280 mike 1.33
|
281 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
282 logs
|
283 karl 1.12 are put
|
284 mike 1.33
|
285 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
286 This is a preliminary version.
|
287 mike 1.33
|
288 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
289 karl 1.13 throws CannotBind exception.
|
290 mike 1.33
|
291 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
292 not
|
293 karl 1.14 print out all of the message. At the least it prints out the error message
294 and components of the message causing the problem.
|
295 mike 1.33
|
296 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
297 mike 1.33
|
298 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
299 karl 1.14 existed.
|
300 mike 1.33
301 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
302 karl 1.15
|
303 karl 1.29 ------------------------------------------------------------------------------
304 --
|
305 karl 1.6 Version 0.97.2
306
307 1. Extend HP UX port to correctly load Dynamic Load Libraries.
308 2. Extend Formatter for Boolean and Uint32 types.
309 3. Change CIM Server to use Trace (-t) flag. This also changed
310 Handler.h to work off of flag.
311 4. Minor corrections to __Namespace Provider.
312 5. Extend tests for Formatter, String, and other modules.
313 6. Correct errors in documentation.
314 7. New working papers (provider interface).
|
315 karl 1.8 8. Add Providerreg.exe tool.
316 9. Add trace output for messages sent from the Server.
|
317 mike 1.26
|
318 karl 1.29 ------------------------------------------------------------------------------
319 --
|
320 mike 1.26
|
321 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
322 karl 1.5
|
323 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
324 find functions. Note: This symbol is defined in config.h. (ks).
325
|
326 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
327 of dynamic lib loaading.
|
328 karl 1.1
329
|
330 karl 1.29 ------------------------------------------------------------------------------
331 --
|
332 mike 1.26
|
333 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
334 karl 1.1
335 1. Added methods in CIMClass, CIMInstance, for existance of properties,
336 qualifiers, methods.
337 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
338 methods.
339 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
340 qualifiers and to
341 remove qualifiers.
342 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
343 compiler. It probably imposed more limitations than would be required with
|
344 karl 1.2 the current compiler. This version of the port produces an excessively large
345 common module due to template bloat. That problem will be fixed in a future
346 change to the port. Also there are a log of duplicate symbol warnings generate
347 by the AIC compiler but these cause no problems. The port has been tested
348 with the complete unit test and client/server test successfully.
|
349 karl 1.1
350 --------------------------------------------------------------------------
|
351 karl 1.2
|
352 mike 1.4 23 May 2001
|
353 karl 1.1
|
354 mike 1.9 1. Ported to HPUX
|
355 karl 1.5
|
356 mike 1.9 --------------------------------------------------------------------------
357
358 29 May 2001
359
360 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
361 karl 1.49.2.8
|
362 karl 1.49.2.5
363
364
|
365 karl 1.48
|
366 karl 1.38
|
367 karl 1.30
|
368 karl 1.29
|
369 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc