1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 mike 1.49.2.19 15. (Mike Brasher) - Initial work on refactorying client into modules.
59 CIMOperationRequestEncoder and partial CIMOperationResponseDecoder.
60
|
61 karl 1.49 ---------------------------------------------------------------------------
|
62 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
63 Tagged as version_1_01 on 3 August 2001 (sorry should have been
64 1.1
|
65 karl 1.49
|
66 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
67 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
68 and ExportClient classes. the indication.
|
69 kumpf 1.49.2.1
|
70 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
71 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
72
|
73 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
74 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
75 karl 1.49
|
76 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
77 library and a thread-safe message queue (first stage). Classes defined
78 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
79 and SimpleThread.
80
|
81 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
82 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
83 information on using wbemexec. A simple test script is included. Please
84 see pegasus/src/Clients/wbemexec/tests/readme for information on running
85 the test script.
|
86 kumpf 1.49.2.3
|
87 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
88 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
89 and
|
90 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
91 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
92 src/Pegasus/Common/TraceFileHandler.cpp.
|
93 kumpf 1.49.2.3
|
94 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
95 Config CLI. Please refer to the documentation
96 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
97 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
98 using the config framework and cimconfig CLI. Make sure to load the config
99 mof (src/gmake config) before starting the cimserver. A simple test script
|
100 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
101 kumpf 1.49.2.4 information on running the test script.
|
102 karl 1.49.2.5
103 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
104 (changed the H and CPP files for the major CIM objects. These
105 functions generate CIM MOF output for the objects.
106
|
107 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
108 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
109 that
110 connect to CIM Server on the same system without having to specify a
111 password.
112 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
113 This component only works on unix and it's not linked in with the main
114 build.
115 When authentication framework is defined this component may need to be
|
116 kumpf 1.49.2.6 modified to integrate with the framework.
117
|
118 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
119 Added a constant to define the maximum length of uint32.
|
120 kumpf 1.49.2.6
|
121 karl 1.49 ---------------------------------------------------------------------------
122 Version 0.99.x (Fixes to version 0.99) in Process
|
123 karl 1.49.2.5
|
124 karl 1.49 NOTE: Please do not input anything to this branch except for critical
125 fixes. This is, in effect, 1.0 and we do not want to use it for
126 development.
127
128 ----------------------------------------------------------------------------
129
130 Version 0.98.0 - Work in progress (This number skipped)
|
131 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
132 mike 1.36
|
133 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
134 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
135
|
136 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
137 in the HTML URL reference for passing instance names.
138
|
139 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
140
141 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
142
|
143 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
144 allow slp to compile.
145
|
146 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
147
148 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
149 ids to queue pointers).
150
|
151 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
152 and Dispatcher.
153
|
154 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
155 and
156 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
157 chip 1.44 ResponseHandler for Provider2 interface.
|
158 mike 1.45
159 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
160
161 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
162
|
163 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
164
|
165 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
166
167 12. (Mike Brasher) - Fixed compiler error on Linux.
168
|
169 karl 1.38 ------------------------------------------------------------------------------
170 --
|
171 mike 1.26
|
172 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
173 karl 1.16
174 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
175 for NT and Linux platforms.
|
176 mike 1.26
|
177 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
178 5988.
179 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
180 the DMTF.
|
181 mike 1.26
|
182 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
183 Fusion event. THis included a) extended the test for end of HTTP header from
184 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
185 Extended the HTTP message ID to allow for non-numeric message IDs.
|
186 mike 1.26
|
187 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
188 and created RepositoryDeclContext.{cpp,h}. This is the first step in
189 revamping the compiler to work independently of the repository (grb).
|
190 mike 1.26
|
191 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
192 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
193 Now when you build normally, you will get the committed grammar and parser
194 files instead of generating your own for a particular platform. This should
195 prevent back-level lex and yacc implementations from generating troublesome
196 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
197 bob 1.20 (grb)
|
198 mike 1.26
|
199 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
200 This change paves the way for upcoming changes that will allow the compiler
201 to work indepently of the repository. (grb)
|
202 mike 1.26
|
203 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
204 mike 1.26
|
205 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
206 modifyClass,
|
207 chip 1.22 createClass to protect caller's object.
|
208 mike 1.26
|
209 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
210 directory. These
211 interfaces allow very smart providers to perform advances operations.
212 CIMProviderStub has
|
213 chip 1.23 been updated to support the new interfaces. Needs testing.
|
214 mike 1.26
|
215 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
216 mike 1.26
|
217 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
218 repository you make world, make rebuild or make repository. ks
|
219 mike 1.26
220 12. Added associators() and associatorNames() operations to CIM repository.
|
221 mike 1.27 (MEB)
222
223 13. More on association implementation (all four operations supported).
224 Need to handle deletion of associations and protocol stubs still.
225 Need to test class associations (rather than just instance associations).
226 Need to handle deleteInstance().
227 (MEB)
|
228 mike 1.26
|
229 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
230
|
231 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
232 AssociationName
|
233 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
234 pages.
235
|
236 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
237 sage 1.31
238 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
239 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
240 Made cimserver accept the -D flag to eliminate the need for environment
241 variables.
|
242 mike 1.32
243 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
244 References() and ReferenceNames() CIM operations. These only operate
245 on instances at this time. They will operate on classes soon.
|
246 kumpf 1.34
247 19. (Mike Glantz) Extended and modified dynamic support
248 changes to (1) work on HP-UX and (2) have all images and libraries
249 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
250 change is to program.mak and library-unix.mak, removing specific
251 lists of dynamic library specs and putting them in the Makefile
252 and libraries.mak files that build the actual targets (lots of
253 these now have DYNAMIC_LIBRARIES defined).
|
254 karl 1.35
255 20. (Karl) added basic Queue function to common (based on array) and added
256 tests for stack and queue.
|
257 karl 1.38
258 ------------------------------------------------------------------------------
259 --
|
260 mike 1.36
|
261 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
262 karl 1.11
|
263 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
264 CIMServer (both)
|
265 karl 1.11 Functions added include:
266 a. Enable trace to log file.
|
267 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
268 is
|
269 karl 1.11 trace to log, -t is trace to console).
270 c. add parameter in optionsrow for help message and enable the capture
|
271 karl 1.12 of these messages in Options class. Also added help print that
272 prints these things out. However, format not to beautiful.
|
273 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
274 e. Extend the Clients\testclient so he does tests on Namespace.
|
275 karl 1.15 2. (KS)Extended Log to show time, severity.
|
276 mike 1.33
|
277 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
278 mike 1.33
|
279 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
280 logs
|
281 karl 1.12 are put
|
282 mike 1.33
|
283 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
284 This is a preliminary version.
|
285 mike 1.33
|
286 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
287 karl 1.13 throws CannotBind exception.
|
288 mike 1.33
|
289 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
290 not
|
291 karl 1.14 print out all of the message. At the least it prints out the error message
292 and components of the message causing the problem.
|
293 mike 1.33
|
294 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
295 mike 1.33
|
296 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
297 karl 1.14 existed.
|
298 mike 1.33
299 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
300 karl 1.15
|
301 karl 1.29 ------------------------------------------------------------------------------
302 --
|
303 karl 1.6 Version 0.97.2
304
305 1. Extend HP UX port to correctly load Dynamic Load Libraries.
306 2. Extend Formatter for Boolean and Uint32 types.
307 3. Change CIM Server to use Trace (-t) flag. This also changed
308 Handler.h to work off of flag.
309 4. Minor corrections to __Namespace Provider.
310 5. Extend tests for Formatter, String, and other modules.
311 6. Correct errors in documentation.
312 7. New working papers (provider interface).
|
313 karl 1.8 8. Add Providerreg.exe tool.
314 9. Add trace output for messages sent from the Server.
|
315 mike 1.26
|
316 karl 1.29 ------------------------------------------------------------------------------
317 --
|
318 mike 1.26
|
319 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
320 karl 1.5
|
321 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
322 find functions. Note: This symbol is defined in config.h. (ks).
323
|
324 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
325 of dynamic lib loaading.
|
326 karl 1.1
327
|
328 karl 1.29 ------------------------------------------------------------------------------
329 --
|
330 mike 1.26
|
331 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
332 karl 1.1
333 1. Added methods in CIMClass, CIMInstance, for existance of properties,
334 qualifiers, methods.
335 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
336 methods.
337 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
338 qualifiers and to
339 remove qualifiers.
340 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
341 compiler. It probably imposed more limitations than would be required with
|
342 karl 1.2 the current compiler. This version of the port produces an excessively large
343 common module due to template bloat. That problem will be fixed in a future
344 change to the port. Also there are a log of duplicate symbol warnings generate
345 by the AIC compiler but these cause no problems. The port has been tested
346 with the complete unit test and client/server test successfully.
|
347 karl 1.1
348 --------------------------------------------------------------------------
|
349 karl 1.2
|
350 mike 1.4 23 May 2001
|
351 karl 1.1
|
352 mike 1.9 1. Ported to HPUX
|
353 karl 1.5
|
354 mike 1.9 --------------------------------------------------------------------------
355
356 29 May 2001
357
358 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
359 karl 1.49.2.8
|
360 karl 1.49.2.5
361
362
|
363 karl 1.48
|
364 karl 1.38
|
365 karl 1.30
|
366 karl 1.29
|
367 mike 1.10
|