1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 kumpf 1.49.2.18 14. (Sushma Fernandes - HP) 21 Aug 2001 - Fixed a bug that was creating an empty file when trace was not enabled. Changed the Tracer test program's executable file name to TracerTest instead of Tracer.
57
|
58 karl 1.49 ---------------------------------------------------------------------------
|
59 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
60 Tagged as version_1_01 on 3 August 2001 (sorry should have been
61 1.1
|
62 karl 1.49
|
63 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
64 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
65 and ExportClient classes. the indication.
|
66 kumpf 1.49.2.1
|
67 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
68 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
69
|
70 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
71 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
72 karl 1.49
|
73 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
74 library and a thread-safe message queue (first stage). Classes defined
75 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
76 and SimpleThread.
77
|
78 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
79 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
80 information on using wbemexec. A simple test script is included. Please
81 see pegasus/src/Clients/wbemexec/tests/readme for information on running
82 the test script.
|
83 kumpf 1.49.2.3
|
84 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
85 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
86 and
|
87 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
88 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
89 src/Pegasus/Common/TraceFileHandler.cpp.
|
90 kumpf 1.49.2.3
|
91 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
92 Config CLI. Please refer to the documentation
93 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
94 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
95 using the config framework and cimconfig CLI. Make sure to load the config
96 mof (src/gmake config) before starting the cimserver. A simple test script
|
97 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
98 kumpf 1.49.2.4 information on running the test script.
|
99 karl 1.49.2.5
100 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
101 (changed the H and CPP files for the major CIM objects. These
102 functions generate CIM MOF output for the objects.
103
|
104 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
105 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
106 that
107 connect to CIM Server on the same system without having to specify a
108 password.
109 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
110 This component only works on unix and it's not linked in with the main
111 build.
112 When authentication framework is defined this component may need to be
|
113 kumpf 1.49.2.6 modified to integrate with the framework.
114
|
115 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
116 Added a constant to define the maximum length of uint32.
|
117 kumpf 1.49.2.6
|
118 karl 1.49 ---------------------------------------------------------------------------
119 Version 0.99.x (Fixes to version 0.99) in Process
|
120 karl 1.49.2.5
|
121 karl 1.49 NOTE: Please do not input anything to this branch except for critical
122 fixes. This is, in effect, 1.0 and we do not want to use it for
123 development.
124
125 ----------------------------------------------------------------------------
126
127 Version 0.98.0 - Work in progress (This number skipped)
|
128 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
129 mike 1.36
|
130 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
131 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
132
|
133 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
134 in the HTML URL reference for passing instance names.
135
|
136 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
137
138 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
139
|
140 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
141 allow slp to compile.
142
|
143 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
144
145 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
146 ids to queue pointers).
147
|
148 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
149 and Dispatcher.
150
|
151 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
152 and
153 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
154 chip 1.44 ResponseHandler for Provider2 interface.
|
155 mike 1.45
156 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
157
158 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
159
|
160 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
161
|
162 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
163
164 12. (Mike Brasher) - Fixed compiler error on Linux.
165
|
166 karl 1.38 ------------------------------------------------------------------------------
167 --
|
168 mike 1.26
|
169 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
170 karl 1.16
171 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
172 for NT and Linux platforms.
|
173 mike 1.26
|
174 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
175 5988.
176 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
177 the DMTF.
|
178 mike 1.26
|
179 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
180 Fusion event. THis included a) extended the test for end of HTTP header from
181 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
182 Extended the HTTP message ID to allow for non-numeric message IDs.
|
183 mike 1.26
|
184 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
185 and created RepositoryDeclContext.{cpp,h}. This is the first step in
186 revamping the compiler to work independently of the repository (grb).
|
187 mike 1.26
|
188 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
189 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
190 Now when you build normally, you will get the committed grammar and parser
191 files instead of generating your own for a particular platform. This should
192 prevent back-level lex and yacc implementations from generating troublesome
193 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
194 bob 1.20 (grb)
|
195 mike 1.26
|
196 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
197 This change paves the way for upcoming changes that will allow the compiler
198 to work indepently of the repository. (grb)
|
199 mike 1.26
|
200 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
201 mike 1.26
|
202 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
203 modifyClass,
|
204 chip 1.22 createClass to protect caller's object.
|
205 mike 1.26
|
206 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
207 directory. These
208 interfaces allow very smart providers to perform advances operations.
209 CIMProviderStub has
|
210 chip 1.23 been updated to support the new interfaces. Needs testing.
|
211 mike 1.26
|
212 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
213 mike 1.26
|
214 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
215 repository you make world, make rebuild or make repository. ks
|
216 mike 1.26
217 12. Added associators() and associatorNames() operations to CIM repository.
|
218 mike 1.27 (MEB)
219
220 13. More on association implementation (all four operations supported).
221 Need to handle deletion of associations and protocol stubs still.
222 Need to test class associations (rather than just instance associations).
223 Need to handle deleteInstance().
224 (MEB)
|
225 mike 1.26
|
226 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
227
|
228 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
229 AssociationName
|
230 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
231 pages.
232
|
233 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
234 sage 1.31
235 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
236 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
237 Made cimserver accept the -D flag to eliminate the need for environment
238 variables.
|
239 mike 1.32
240 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
241 References() and ReferenceNames() CIM operations. These only operate
242 on instances at this time. They will operate on classes soon.
|
243 kumpf 1.34
244 19. (Mike Glantz) Extended and modified dynamic support
245 changes to (1) work on HP-UX and (2) have all images and libraries
246 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
247 change is to program.mak and library-unix.mak, removing specific
248 lists of dynamic library specs and putting them in the Makefile
249 and libraries.mak files that build the actual targets (lots of
250 these now have DYNAMIC_LIBRARIES defined).
|
251 karl 1.35
252 20. (Karl) added basic Queue function to common (based on array) and added
253 tests for stack and queue.
|
254 karl 1.38
255 ------------------------------------------------------------------------------
256 --
|
257 mike 1.36
|
258 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
259 karl 1.11
|
260 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
261 CIMServer (both)
|
262 karl 1.11 Functions added include:
263 a. Enable trace to log file.
|
264 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
265 is
|
266 karl 1.11 trace to log, -t is trace to console).
267 c. add parameter in optionsrow for help message and enable the capture
|
268 karl 1.12 of these messages in Options class. Also added help print that
269 prints these things out. However, format not to beautiful.
|
270 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
271 e. Extend the Clients\testclient so he does tests on Namespace.
|
272 karl 1.15 2. (KS)Extended Log to show time, severity.
|
273 mike 1.33
|
274 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
275 mike 1.33
|
276 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
277 logs
|
278 karl 1.12 are put
|
279 mike 1.33
|
280 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
281 This is a preliminary version.
|
282 mike 1.33
|
283 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
284 karl 1.13 throws CannotBind exception.
|
285 mike 1.33
|
286 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
287 not
|
288 karl 1.14 print out all of the message. At the least it prints out the error message
289 and components of the message causing the problem.
|
290 mike 1.33
|
291 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
292 mike 1.33
|
293 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
294 karl 1.14 existed.
|
295 mike 1.33
296 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
297 karl 1.15
|
298 karl 1.29 ------------------------------------------------------------------------------
299 --
|
300 karl 1.6 Version 0.97.2
301
302 1. Extend HP UX port to correctly load Dynamic Load Libraries.
303 2. Extend Formatter for Boolean and Uint32 types.
304 3. Change CIM Server to use Trace (-t) flag. This also changed
305 Handler.h to work off of flag.
306 4. Minor corrections to __Namespace Provider.
307 5. Extend tests for Formatter, String, and other modules.
308 6. Correct errors in documentation.
309 7. New working papers (provider interface).
|
310 karl 1.8 8. Add Providerreg.exe tool.
311 9. Add trace output for messages sent from the Server.
|
312 mike 1.26
|
313 karl 1.29 ------------------------------------------------------------------------------
314 --
|
315 mike 1.26
|
316 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
317 karl 1.5
|
318 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
319 find functions. Note: This symbol is defined in config.h. (ks).
320
|
321 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
322 of dynamic lib loaading.
|
323 karl 1.1
324
|
325 karl 1.29 ------------------------------------------------------------------------------
326 --
|
327 mike 1.26
|
328 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
329 karl 1.1
330 1. Added methods in CIMClass, CIMInstance, for existance of properties,
331 qualifiers, methods.
332 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
333 methods.
334 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
335 qualifiers and to
336 remove qualifiers.
337 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
338 compiler. It probably imposed more limitations than would be required with
|
339 karl 1.2 the current compiler. This version of the port produces an excessively large
340 common module due to template bloat. That problem will be fixed in a future
341 change to the port. Also there are a log of duplicate symbol warnings generate
342 by the AIC compiler but these cause no problems. The port has been tested
343 with the complete unit test and client/server test successfully.
|
344 karl 1.1
345 --------------------------------------------------------------------------
|
346 karl 1.2
|
347 mike 1.4 23 May 2001
|
348 karl 1.1
|
349 mike 1.9 1. Ported to HPUX
|
350 karl 1.5
|
351 mike 1.9 --------------------------------------------------------------------------
352
353 29 May 2001
354
355 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
356 karl 1.49.2.8
|
357 karl 1.49.2.5
358
359
|
360 karl 1.48
|
361 karl 1.38
|
362 karl 1.30
|
363 karl 1.29
|
364 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc