1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 mike 1.49.2.17 10. (Mike Brasher) - Fixed minor bug in repository implementation.
49
50 11. (Mike Brasher) - Committed fix to missing PARAMETER.REFERENCE XML element.
51
52 12. (Mike Brasher) - Committed rework of server into queue approach.
53
54 13. (Mike Brasher) - New webserver and webclient examples.
55
|
56 karl 1.49 ---------------------------------------------------------------------------
|
57 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
58 Tagged as version_1_01 on 3 August 2001 (sorry should have been
59 1.1
|
60 karl 1.49
|
61 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
62 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
63 and ExportClient classes. the indication.
|
64 kumpf 1.49.2.1
|
65 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
66 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
67
|
68 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
69 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
70 karl 1.49
|
71 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
72 library and a thread-safe message queue (first stage). Classes defined
73 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
74 and SimpleThread.
75
|
76 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
77 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
78 information on using wbemexec. A simple test script is included. Please
79 see pegasus/src/Clients/wbemexec/tests/readme for information on running
80 the test script.
|
81 kumpf 1.49.2.3
|
82 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
83 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
84 and
|
85 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
86 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
87 src/Pegasus/Common/TraceFileHandler.cpp.
|
88 kumpf 1.49.2.3
|
89 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
90 Config CLI. Please refer to the documentation
91 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
92 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
93 using the config framework and cimconfig CLI. Make sure to load the config
94 mof (src/gmake config) before starting the cimserver. A simple test script
|
95 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
96 kumpf 1.49.2.4 information on running the test script.
|
97 karl 1.49.2.5
98 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
99 (changed the H and CPP files for the major CIM objects. These
100 functions generate CIM MOF output for the objects.
101
|
102 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
103 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
104 that
105 connect to CIM Server on the same system without having to specify a
106 password.
107 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
108 This component only works on unix and it's not linked in with the main
109 build.
110 When authentication framework is defined this component may need to be
|
111 kumpf 1.49.2.6 modified to integrate with the framework.
112
|
113 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
114 Added a constant to define the maximum length of uint32.
|
115 kumpf 1.49.2.6
|
116 karl 1.49 ---------------------------------------------------------------------------
117 Version 0.99.x (Fixes to version 0.99) in Process
|
118 karl 1.49.2.5
|
119 karl 1.49 NOTE: Please do not input anything to this branch except for critical
120 fixes. This is, in effect, 1.0 and we do not want to use it for
121 development.
122
123 ----------------------------------------------------------------------------
124
125 Version 0.98.0 - Work in progress (This number skipped)
|
126 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
127 mike 1.36
|
128 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
129 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
130
|
131 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
132 in the HTML URL reference for passing instance names.
133
|
134 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
135
136 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
137
|
138 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
139 allow slp to compile.
140
|
141 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
142
143 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
144 ids to queue pointers).
145
|
146 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
147 and Dispatcher.
148
|
149 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
150 and
151 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
152 chip 1.44 ResponseHandler for Provider2 interface.
|
153 mike 1.45
154 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
155
156 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
157
|
158 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
159
|
160 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
161
162 12. (Mike Brasher) - Fixed compiler error on Linux.
163
|
164 karl 1.38 ------------------------------------------------------------------------------
165 --
|
166 mike 1.26
|
167 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
168 karl 1.16
169 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
170 for NT and Linux platforms.
|
171 mike 1.26
|
172 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
173 5988.
174 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
175 the DMTF.
|
176 mike 1.26
|
177 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
178 Fusion event. THis included a) extended the test for end of HTTP header from
179 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
180 Extended the HTTP message ID to allow for non-numeric message IDs.
|
181 mike 1.26
|
182 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
183 and created RepositoryDeclContext.{cpp,h}. This is the first step in
184 revamping the compiler to work independently of the repository (grb).
|
185 mike 1.26
|
186 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
187 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
188 Now when you build normally, you will get the committed grammar and parser
189 files instead of generating your own for a particular platform. This should
190 prevent back-level lex and yacc implementations from generating troublesome
191 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
192 bob 1.20 (grb)
|
193 mike 1.26
|
194 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
195 This change paves the way for upcoming changes that will allow the compiler
196 to work indepently of the repository. (grb)
|
197 mike 1.26
|
198 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
199 mike 1.26
|
200 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
201 modifyClass,
|
202 chip 1.22 createClass to protect caller's object.
|
203 mike 1.26
|
204 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
205 directory. These
206 interfaces allow very smart providers to perform advances operations.
207 CIMProviderStub has
|
208 chip 1.23 been updated to support the new interfaces. Needs testing.
|
209 mike 1.26
|
210 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
211 mike 1.26
|
212 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
213 repository you make world, make rebuild or make repository. ks
|
214 mike 1.26
215 12. Added associators() and associatorNames() operations to CIM repository.
|
216 mike 1.27 (MEB)
217
218 13. More on association implementation (all four operations supported).
219 Need to handle deletion of associations and protocol stubs still.
220 Need to test class associations (rather than just instance associations).
221 Need to handle deleteInstance().
222 (MEB)
|
223 mike 1.26
|
224 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
225
|
226 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
227 AssociationName
|
228 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
229 pages.
230
|
231 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
232 sage 1.31
233 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
234 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
235 Made cimserver accept the -D flag to eliminate the need for environment
236 variables.
|
237 mike 1.32
238 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
239 References() and ReferenceNames() CIM operations. These only operate
240 on instances at this time. They will operate on classes soon.
|
241 kumpf 1.34
242 19. (Mike Glantz) Extended and modified dynamic support
243 changes to (1) work on HP-UX and (2) have all images and libraries
244 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
245 change is to program.mak and library-unix.mak, removing specific
246 lists of dynamic library specs and putting them in the Makefile
247 and libraries.mak files that build the actual targets (lots of
248 these now have DYNAMIC_LIBRARIES defined).
|
249 karl 1.35
250 20. (Karl) added basic Queue function to common (based on array) and added
251 tests for stack and queue.
|
252 karl 1.38
253 ------------------------------------------------------------------------------
254 --
|
255 mike 1.36
|
256 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
257 karl 1.11
|
258 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
259 CIMServer (both)
|
260 karl 1.11 Functions added include:
261 a. Enable trace to log file.
|
262 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
263 is
|
264 karl 1.11 trace to log, -t is trace to console).
265 c. add parameter in optionsrow for help message and enable the capture
|
266 karl 1.12 of these messages in Options class. Also added help print that
267 prints these things out. However, format not to beautiful.
|
268 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
269 e. Extend the Clients\testclient so he does tests on Namespace.
|
270 karl 1.15 2. (KS)Extended Log to show time, severity.
|
271 mike 1.33
|
272 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
273 mike 1.33
|
274 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
275 logs
|
276 karl 1.12 are put
|
277 mike 1.33
|
278 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
279 This is a preliminary version.
|
280 mike 1.33
|
281 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
282 karl 1.13 throws CannotBind exception.
|
283 mike 1.33
|
284 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
285 not
|
286 karl 1.14 print out all of the message. At the least it prints out the error message
287 and components of the message causing the problem.
|
288 mike 1.33
|
289 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
290 mike 1.33
|
291 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
292 karl 1.14 existed.
|
293 mike 1.33
294 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
295 karl 1.15
|
296 karl 1.29 ------------------------------------------------------------------------------
297 --
|
298 karl 1.6 Version 0.97.2
299
300 1. Extend HP UX port to correctly load Dynamic Load Libraries.
301 2. Extend Formatter for Boolean and Uint32 types.
302 3. Change CIM Server to use Trace (-t) flag. This also changed
303 Handler.h to work off of flag.
304 4. Minor corrections to __Namespace Provider.
305 5. Extend tests for Formatter, String, and other modules.
306 6. Correct errors in documentation.
307 7. New working papers (provider interface).
|
308 karl 1.8 8. Add Providerreg.exe tool.
309 9. Add trace output for messages sent from the Server.
|
310 mike 1.26
|
311 karl 1.29 ------------------------------------------------------------------------------
312 --
|
313 mike 1.26
|
314 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
315 karl 1.5
|
316 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
317 find functions. Note: This symbol is defined in config.h. (ks).
318
|
319 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
320 of dynamic lib loaading.
|
321 karl 1.1
322
|
323 karl 1.29 ------------------------------------------------------------------------------
324 --
|
325 mike 1.26
|
326 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
327 karl 1.1
328 1. Added methods in CIMClass, CIMInstance, for existance of properties,
329 qualifiers, methods.
330 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
331 methods.
332 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
333 qualifiers and to
334 remove qualifiers.
335 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
336 compiler. It probably imposed more limitations than would be required with
|
337 karl 1.2 the current compiler. This version of the port produces an excessively large
338 common module due to template bloat. That problem will be fixed in a future
339 change to the port. Also there are a log of duplicate symbol warnings generate
340 by the AIC compiler but these cause no problems. The port has been tested
341 with the complete unit test and client/server test successfully.
|
342 karl 1.1
343 --------------------------------------------------------------------------
|
344 karl 1.2
|
345 mike 1.4 23 May 2001
|
346 karl 1.1
|
347 mike 1.9 1. Ported to HPUX
|
348 karl 1.5
|
349 mike 1.9 --------------------------------------------------------------------------
350
351 29 May 2001
352
353 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
354 karl 1.49.2.8
|
355 karl 1.49.2.5
356
357
|
358 karl 1.48
|
359 karl 1.38
|
360 karl 1.30
|
361 karl 1.29
|
362 mike 1.10
|