1 karl 1.1 CHANGE LOG FOR PEGASUS
2
|
3 karl 1.49.2.8 Version 1.1.1 - 3 August 2001 - Development Branch (Work in Progress)
4 current working dev branch of build
|
5 mike 1.36
|
6 karl 1.49.2.9 1. (Karl) 6 Aug - extend ToMof functions. The MOF for a class can now be
7 seen as part of CGIclient class displays.
|
8 karl 1.49.2.10
9 2. (Karl) 7 Aug - Update CIM25 Schema from the "preliminary" version
10 to the final version in Schemas\CIM25. This included minor
11 corrections, etc and a couple of file changes. This is the
12 official final CIM 25 schema relesed by the DMTF. This change
13 should not affect any current work.
14 3. (Karl) 7 Aug 2001 - Added CIM Schema 2.6 (preliminary) to the Schemas
15 directorys. Note however that today the make repository still
16 loads the 2.5 schema.
|
17 karl 1.49.2.11
18 4. (Karl) 8 Aug 2001 - Change cimmofparser.cpp to put header and trailers
19 on XML output.
20
|
21 kumpf 1.49.2.12 5. (Denise Eckstein - HP) 13 Aug 2001 - Fixed an HP-UX compile problem
22 in various src/utils/mu commands (MoveCmd.cpp, PrependCmd.cpp, RmCmd.cpp,
23 RmDirHierCmd.cpp, StripCmd.cpp, TouchCmd.cpp). aCC scopes variable
24 declarations in for loop initializers outside the loop, so multiple
25 "for (int i=0; i<10; i++);" statements cause a compile error.
26
|
27 kumpf 1.49.2.13 6. (Nag Boranna - HP) 15 Aug 2001 - Modified Config framework to remove
28 dependency on the config files at the start of the cimserver. Now the
29 cimserver will use in-memory default values in the absence of config files
30 and command line options. Fixed a few defects in the config framework that
31 were causing cimom to crash under certain conditions. Changed the config
32 provider class name to 'PG_ConfigSetting' in the mof file and modified
33 provider implementation files accordingly. Also modified the config CLI
34 to show user friendly error/status messages.
|
35 karl 1.49.2.11
|
36 kumpf 1.49.2.14 7. (Carol Ann Krug Graves - HP) 16 Aug 2001 - Fixed a bug in wbemexec CLI
37 (reported incorrect line number on error in XML request if input redirected).
38 Enhanced the -d debug command line option to allow more flexibility in
39 generating debug output.
40
|
41 karl 1.49.2.15 8. Karl 17 Aug 2001) - Extended CIMMOF compiler to put pegasus comment line in
42 xml when it generates xml output.
43
|
44 kumpf 1.49.2.16 9. (Roger Kumpf - HP) 20 Aug 2001 - Combine instances of each class into
45 a common file to reduce the number of files required by the default
46 repository implementation.
47
|
48 karl 1.49 ---------------------------------------------------------------------------
|
49 karl 1.49.2.8 Version 1.1 - July 2001 Development branch
50 Tagged as version_1_01 on 3 August 2001 (sorry should have been
51 1.1
|
52 karl 1.49
|
53 karl 1.49.2.5 1. (Nitin Upasani - HP) Implementation of handleIndication() to deliver
54 indication by defining IndicationDispatcher, HandlerTable, CIMHandler
55 and ExportClient classes. the indication.
|
56 kumpf 1.49.2.1
|
57 karl 1.49.2.5 Also implemented CIMxmlIndicationHandler and sendmailIndicationHandler to
|
58 kumpf 1.49.2.1 make the delivery of indications over Xml-HTTP and email respectively.
59
|
60 karl 1.49.2.5 Provided examples for HandlerTable, XmlIndicationDelivery and
|
61 kumpf 1.49.2.1 SendMailIndicationDelivery to support this implementation.
|
62 karl 1.49
|
63 sage 1.49.2.2 2. (Markus Mueller - IBM) Implementation of a Linux specific threading
64 library and a thread-safe message queue (first stage). Classes defined
65 are Mutex, Condition, Semaphore, AtomicInt, ReadWriteSem, cleanup_handler
66 and SimpleThread.
67
|
68 kumpf 1.49.2.3 3. (Carol Ann Krug Graves - HP) Implementation of wbemexec CLI. Please refer
|
69 karl 1.49.2.5 to the man page in pegasus/src/Clients/wbemexec/doc/wbemexec.html for more
70 information on using wbemexec. A simple test script is included. Please
71 see pegasus/src/Clients/wbemexec/tests/readme for information on running
72 the test script.
|
73 kumpf 1.49.2.3
|
74 kumpf 1.49.2.4 4. (Sushma Fernandes - HP) Implementation of Trace Framework. Please
|
75 karl 1.49.2.5 refer to the documentation in src/Pegasus/Common/doc/TracingDevGuide.pdf
76 and
|
77 kumpf 1.49.2.4 src/Pegasus/Common/doc/TracingUserGuide.pdf for more information on using
78 the Trace framework. Classes defined are src/Pegasus/Common/Tracer.cpp and
79 src/Pegasus/Common/TraceFileHandler.cpp.
|
80 kumpf 1.49.2.3
|
81 kumpf 1.49.2.4 5. (Nag Boranna - HP) Implementation of Config Framework, Config Provider and
82 Config CLI. Please refer to the documentation
83 in pegasus/doc/WorkPapers/CIMOMConfigurationWorkPaper.pdf and the man page
84 in pegasus/src/Clients/cimconfig/doc/cimconfig.html for more information on
85 using the config framework and cimconfig CLI. Make sure to load the config
86 mof (src/gmake config) before starting the cimserver. A simple test script
|
87 karl 1.49.2.5 is included. Please see pegasus/src/Clients/wbemexec/tests/readme for
|
88 kumpf 1.49.2.4 information on running the test script.
|
89 karl 1.49.2.5
90 6. (Karl Schopmeyer 31 July 2001) - Add toMof functions to the CIM objects
91 (changed the H and CPP files for the major CIM objects. These
92 functions generate CIM MOF output for the objects.
93
|
94 kumpf 1.49.2.6 7. (Bapu Patil - HP) Implementation of Local Channel Authentication. Local
|
95 karl 1.49.2.8 Authentication provides security mechanism to authenticates CIM clients
96 that
97 connect to CIM Server on the same system without having to specify a
98 password.
99 Please refer to "doc/LocalCIMSecurity.pdf" for more information on design.
100 This component only works on unix and it's not linked in with the main
101 build.
102 When authentication framework is defined this component may need to be
|
103 kumpf 1.49.2.6 modified to integrate with the framework.
104
|
105 kumpf 1.49.2.7 8. (Sushma Fernandes - HP) Removed the ltoa() function call from Tracer.cpp.
106 Added a constant to define the maximum length of uint32.
|
107 kumpf 1.49.2.6
|
108 karl 1.49 ---------------------------------------------------------------------------
109 Version 0.99.x (Fixes to version 0.99) in Process
|
110 karl 1.49.2.5
|
111 karl 1.49 NOTE: Please do not input anything to this branch except for critical
112 fixes. This is, in effect, 1.0 and we do not want to use it for
113 development.
114
115 ----------------------------------------------------------------------------
116
117 Version 0.98.0 - Work in progress (This number skipped)
|
118 karl 1.48 Version -.99.0 - Tagged as version 0.99,17 July 8:00 am - KS
|
119 mike 1.36
|
120 karl 1.38 1. (Mike Brasher) Added support for class association operations
|
121 mike 1.37 (references(), associators(), referenceNames(), associatorNames()).
122
|
123 kumpf 1.39 2. (Jenny Yu - HP) Fixed problem in CGIClient.cpp to handle double quotes
124 in the HTML URL reference for passing instance names.
125
|
126 mike 1.41 3. (Mike Brasher) Mass substitution to prepend CIM_ERR to CIM Status Codes.
127
128 4. (Mike Brasher) Added CIM Message types in preparation for qeueing.
129
|
130 kumpf 1.40 3. (Denise E. - HP) HP-UX specific changes to lslp-perl-linux,h and slp.h to
131 allow slp to compile.
132
|
133 mike 1.42 4. (Mike Brasher) - Finalized CIM messages.
134
135 5. (Mike Brasher) - Added queue ids concept (using hash table which maps
136 ids to queue pointers).
137
|
138 mike 1.43 6. (Mike Brasher) - Started integration of message queues with ServerHandler
139 and Dispatcher.
140
|
141 karl 1.48 7. (Chip Vincent) - Update Provider2 interfaces. Made changes to Dispatcher
142 and
143 CIMProvider to support both interfaces. Added CIMOMHandle and sample
|
144 chip 1.44 ResponseHandler for Provider2 interface.
|
145 mike 1.45
146 8. (Mike Brasher) - Replaced dispatcher with a queue-based dispatcher.
147
148 9. (Mike Brasher) - Retrofited CIMOMHandle to be queue-based.
149
|
150 mike 1.46 10. (Mike Brasher) - Changed CIMOMHandle to carry repository pointer.
151
|
152 mike 1.47 11. (Mike Brasher) - Ported to TRU64.
153
154 12. (Mike Brasher) - Fixed compiler error on Linux.
155
|
156 karl 1.38 ------------------------------------------------------------------------------
157 --
|
158 mike 1.26
|
159 karl 1.35 Version 0.97.4 - Tag Created for 0.97.4 and snapshot 7 July 2001
|
160 karl 1.16
161 1. Deamonizaiton added to CIMServer.cpp by Mike Day. This includes code bothe
162 for NT and Linux platforms.
|
163 mike 1.26
|
164 karl 1.17 2. KS Changed the namespace cimv20 to cimv2 and the default port from 888 to
165 5988.
166 NOTE: 5988 is now the officially recognized preferred port for a CIMServer by
167 the DMTF.
|
168 mike 1.26
|
169 karl 1.17 3. KS Corrected some errors found in interoperability testing during the DMTF
170 Fusion event. THis included a) extended the test for end of HTTP header from
171 CR/LF/CR/LF to also allow LF/LF. Not strictly legal but widely used. b).
172 Extended the HTTP message ID to allow for non-numeric message IDs.
|
173 mike 1.26
|
174 bob 1.18 4. Broke out RepositoryDeclContext class from Repository/CIMRepository.cpp
175 and created RepositoryDeclContext.{cpp,h}. This is the first step in
176 revamping the compiler to work independently of the repository (grb).
|
177 mike 1.26
|
178 bob 1.19 5. Created new makefile Compiler/Makefile.grammar and modified
179 Compiler/Makefile; and added cimmof_tab.{cpp,h} and cimmof_lex.cpp.
180 Now when you build normally, you will get the committed grammar and parser
181 files instead of generating your own for a particular platform. This should
182 prevent back-level lex and yacc implementations from generating troublesome
183 code. The committed files are generated from flex 2.5.4 and bison 1,28.
|
184 bob 1.20 (grb)
|
185 mike 1.26
|
186 bob 1.20 6. Added Compiler/compilerDeclContext.{cpp,h} and makefile changes.
187 This change paves the way for upcoming changes that will allow the compiler
188 to work indepently of the repository. (grb)
|
189 mike 1.26
|
190 karl 1.21 7. Extend testclient (clients/testclient) tests and functions. ks 19 June 2001
|
191 mike 1.26
|
192 karl 1.25 8. CV added const to CIMOperations modifyInstance, createInstance,
193 modifyClass,
|
194 chip 1.22 createClass to protect caller's object.
|
195 mike 1.26
|
196 karl 1.25 9. CV added CIMQueryProvider and CIMAssociationProvider to the Provider2
197 directory. These
198 interfaces allow very smart providers to perform advances operations.
199 CIMProviderStub has
|
200 chip 1.23 been updated to support the new interfaces. Needs testing.
|
201 mike 1.26
|
202 sage 1.24 10. Added rpm packaging support and shell script based build process. MM
|
203 mike 1.26
|
204 karl 1.25 11. Changed Make so make tests no longer rebuilds repository. To rebuild
205 repository you make world, make rebuild or make repository. ks
|
206 mike 1.26
207 12. Added associators() and associatorNames() operations to CIM repository.
|
208 mike 1.27 (MEB)
209
210 13. More on association implementation (all four operations supported).
211 Need to handle deletion of associations and protocol stubs still.
212 Need to test class associations (rather than just instance associations).
213 Need to handle deleteInstance().
214 (MEB)
|
215 mike 1.26
|
216 mday 1.28 14. slp client code integrated as pegasus-style c++ library. (MDD)
217
|
218 karl 1.30 15. (Karl)Update CGI Client to correct number of errors and install
219 AssociationName
|
220 karl 1.29 and ReferenceName functions. This included extensive update to the HTML
221 pages.
222
|
223 karl 1.30 16. (Denise E.) Changes to slp client support code for HPUX (
|
224 sage 1.31
225 17. (Markus Mueller) Additional changes to support dynamic libraries. Fixed
226 ProviderTable tests. Fixed build process (slp with PEGASUS_SUPPORTS_DYNLIB).
227 Made cimserver accept the -D flag to eliminate the need for environment
228 variables.
|
229 mike 1.32
230 18. (Mike Brasher) Added support for Associators(), AssociatorNames(),
231 References() and ReferenceNames() CIM operations. These only operate
232 on instances at this time. They will operate on classes soon.
|
233 kumpf 1.34
234 19. (Mike Glantz) Extended and modified dynamic support
235 changes to (1) work on HP-UX and (2) have all images and libraries
236 buildable per the value of PEGASUS_SUPPORTS_DYNLIB. The biggest
237 change is to program.mak and library-unix.mak, removing specific
238 lists of dynamic library specs and putting them in the Makefile
239 and libraries.mak files that build the actual targets (lots of
240 these now have DYNAMIC_LIBRARIES defined).
|
241 karl 1.35
242 20. (Karl) added basic Queue function to common (based on array) and added
243 tests for stack and queue.
|
244 karl 1.38
245 ------------------------------------------------------------------------------
246 --
|
247 mike 1.36
|
248 karl 1.16 Version 0.97.3 - Released 5 June 2001
|
249 karl 1.11
|
250 karl 1.12 1. (KS)OptionManager (CPP and H), Logger (CPP and H), Handler (CPP and H),
251 CIMServer (both)
|
252 karl 1.11 Functions added include:
253 a. Enable trace to log file.
|
254 karl 1.12 b. Add option so that you can trace to console or trace to logfile (-l
255 is
|
256 karl 1.11 trace to log, -t is trace to console).
257 c. add parameter in optionsrow for help message and enable the capture
|
258 karl 1.12 of these messages in Options class. Also added help print that
259 prints these things out. However, format not to beautiful.
|
260 karl 1.11 d. Eliminate a couple of messages coming from __Namespace provider.
261 e. Extend the Clients\testclient so he does tests on Namespace.
|
262 karl 1.15 2. (KS)Extended Log to show time, severity.
|
263 mike 1.33
|
264 karl 1.15 3. (KS)Added getCurrentASCIITime functions to System.x
|
265 mike 1.33
|
266 karl 1.15 4. (KS)Extended options on CIMServer including 1. option to determine where
267 logs
|
268 karl 1.12 are put
|
269 mike 1.33
|
270 karl 1.15 5. (KS)Added TestClient that executes a series of tests against a server.
271 This is a preliminary version.
|
272 mike 1.33
|
273 karl 1.15 6. (KS)Corrected problem with acceptor.bind where failure was being lost. Now
|
274 karl 1.13 throws CannotBind exception.
|
275 mike 1.33
|
276 karl 1.15 7. (KS)Added logger entry to XMLParser for errors. NOTE: At this point it may
277 not
|
278 karl 1.14 print out all of the message. At the least it prints out the error message
279 and components of the message causing the problem.
|
280 mike 1.33
|
281 karl 1.15 8. (KS)Added clean option to server but temprarily disabled.
|
282 mike 1.33
|
283 karl 1.15 9. (KS)Fixed problem where logs were not created unless logs directory already
|
284 karl 1.14 existed.
|
285 mike 1.33
286 10. (Mike Brasher) Added "Test" prefix to all test program names.
|
287 karl 1.15
|
288 karl 1.29 ------------------------------------------------------------------------------
289 --
|
290 karl 1.6 Version 0.97.2
291
292 1. Extend HP UX port to correctly load Dynamic Load Libraries.
293 2. Extend Formatter for Boolean and Uint32 types.
294 3. Change CIM Server to use Trace (-t) flag. This also changed
295 Handler.h to work off of flag.
296 4. Minor corrections to __Namespace Provider.
297 5. Extend tests for Formatter, String, and other modules.
298 6. Correct errors in documentation.
299 7. New working papers (provider interface).
|
300 karl 1.8 8. Add Providerreg.exe tool.
301 9. Add trace output for messages sent from the Server.
|
302 mike 1.26
|
303 karl 1.29 ------------------------------------------------------------------------------
304 --
|
305 mike 1.26
|
306 karl 1.6 23 May 2001 Version 0.97.1 Tags as version_0_971
|
307 karl 1.5
|
308 karl 1.3 1. Add PEG_NOT_FOUND symbol to replace Uint32(-1) in any of the object
309 find functions. Note: This symbol is defined in config.h. (ks).
310
|
311 karl 1.5 2. Port To HP UX. This required a number of changes particularly in the area
312 of dynamic lib loaading.
|
313 karl 1.1
314
|
315 karl 1.29 ------------------------------------------------------------------------------
316 --
|
317 mike 1.26
|
318 karl 1.3 21 May 2001 Version 0.97 - Tagged as version_0_97
|
319 karl 1.1
320 1. Added methods in CIMClass, CIMInstance, for existance of properties,
321 qualifiers, methods.
322 2. Add methods in CIMClass, CIMInstance to remove properties, qualifier,
323 methods.
324 3. Added CIMmethod and CIMProperty in CIMMethod to text for existance of
325 qualifiers and to
326 remove qualifiers.
327 4. Ported to AIX. NOTE: This port was done using an earlier version of the AIX
328 compiler. It probably imposed more limitations than would be required with
|
329 karl 1.2 the current compiler. This version of the port produces an excessively large
330 common module due to template bloat. That problem will be fixed in a future
331 change to the port. Also there are a log of duplicate symbol warnings generate
332 by the AIC compiler but these cause no problems. The port has been tested
333 with the complete unit test and client/server test successfully.
|
334 karl 1.1
335 --------------------------------------------------------------------------
|
336 karl 1.2
|
337 mike 1.4 23 May 2001
|
338 karl 1.1
|
339 mike 1.9 1. Ported to HPUX
|
340 karl 1.5
|
341 mike 1.9 --------------------------------------------------------------------------
342
343 29 May 2001
344
345 1. Implemented CIMRepository::setProperty() and CIMRepository::getProperty().
|
346 karl 1.49.2.8
|
347 karl 1.49.2.5
348
349
|
350 karl 1.48
|
351 karl 1.38
|
352 karl 1.30
|
353 karl 1.29
|
354 mike 1.10
|
Return to
changelog.txt
CVS log
Up to [Pegasus] / pegasus / doc