1 karl 1.1 #!/bin/sh
2 #set -x
3 #//%LICENSE////////////////////////////////////////////////////////////////
4 #//
5 #// Licensed to The Open Group (TOG) under one or more contributor license
6 #// agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
7 #// this work for additional information regarding copyright ownership.
8 #// Each contributor licenses this file to you under the OpenPegasus Open
9 #// Source License; you may not use this file except in compliance with the
10 #// License.
11 #//
12 #// Permission is hereby granted, free of charge, to any person obtaining a
13 #// copy of this software and associated documentation files (the "Software"),
14 #// to deal in the Software without restriction, including without limitation
15 #// the rights to use, copy, modify, merge, publish, distribute, sublicense,
16 #// and/or sell copies of the Software, and to permit persons to whom the
17 #// Software is furnished to do so, subject to the following conditions:
18 #//
19 #// The above copyright notice and this permission notice shall be included
20 #// in all copies or substantial portions of the Software.
21 #//
22 karl 1.1 #// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
23 #// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
24 #// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
25 #// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
26 #// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
27 #// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
28 #// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 #//
30 #//////////////////////////////////////////////////////////////////////////
31
32 ##==============================================================================
33 ##
34 ## Check for existence of pegasus config.mak. If this does not exist, it means
35 ## that the distribution is incomplete or that the configure file has been run
36 ## from the wrong directory.
37 ##
38 ##==============================================================================
39 tiny=0
40 prefix=""
41 test_option=0
42 disable_tests=0
43 karl 1.1 disable_tests=0
44 interop_name=""
45 enable_pertinst=0
46 dis_wsman=0
47 config=mak/config.mak
48
49 if [ ! -f "$config" ]; then
50 echo "$0: Error: ./configure must be run from root of Pegasus distribution."
51 echo
52 exit 1
53 fi
54
55 ##==============================================================================
56 ##
57 ## Collection command line options.
58 ##
59 ##==============================================================================
60
61 help=
62
63 for opt
64 karl 1.1 do
65
66 optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
67
68 case $opt in
69
70 -h | --help)
71 help=1
72 ;;
73
74 --prefix=*)
75 prefix=$optarg
76 ;;
77
78 --test)
79 test_option=1
80 ;;
81
82 --tiny)
83 tiny=1
84 disable_trace=1
85 karl 1.1 disable_tests=1
86 interop_name=interop
87 enable_perinst=1
88 ;;
89
90 --flavor=*)
91 flavor=$optarg
92 ;;
93
94 --disable-wsman)
95 dis_wsman=1
96 ;;
97
98 *)
99 echo "$0: unknown option: $opt"
100 exit 1
101 ;;
102
103 esac
104 done
105
106 karl 1.1 ##==============================================================================
107 ##
108 ## Print help message if --help given on command line.
109 ##
110 ##==============================================================================
111
112 if [ "$help" = "1" ]; then
113 cat<<END
114
115 Usage: ./configure [OPTION]...
116
117 Configures OpenPegasus build options.
118
119 Configure examples.
120 $ ./configure
121 $ make
122
123 Options:
124 --help
125 Print this help message.
126 --prefix=DIR
127 karl 1.1 Install under DIR
128 --test
129 Build with test options included.
130 --tiny
131 Build tiny version of pegasus with support to SSL,SLP,ICU and PAM all disabled.
132 --flavor
133 Building pegasus with the given flavor tag.
134 END
135 fi
136
137
138
139 ##==============================================================================
140 ##
141 ## Guess the platform.
142 ##
143 ##==============================================================================
144 if [ "$help" != "1" ]; then
145 if [ -z "$platform" ]; then
146
147 machine=`(uname -m) 2>/dev/null` || machine=unknown
148 karl 1.1 system=`(uname -s) 2>/dev/null` || system=unknown
149 token="$machine:$system"
150
151 case "$token" in
152
153 i686:Linux)
154 platform=LINUX_IX86_GNU
155 libbase=lib
156 ;;
157
158 x86_64:Linux)
159 platform=LINUX_X86_64_GNU
160 libbase=lib64
161 ;;
162
163 sun*:SunOS)
164 platform=SOLARIS_SPARC_64_CC
165 libbase=lib/64
166 ;;
167
168 i86pc:SunOS)
169 karl 1.1 platform=SOLARIS_X86_64_CC
170 libbase=lib/64
171 ;;
172
173 ia64:HP-UX)
174 platform=HPUX_IA64_ACC
175 libbase=lib/64
176 ;;
177
178 9000/800:HP-UX)
179 platform=HPUX_PARISC_ACC
180 libbase=lib
181 ;;
182
183 ia64:Linux)
184 platform=LINUX_IA64_GNU
185 libbase=lib/64
186 ;;
187
188 ppc:Linux)
189 platform=LINUX_PPC_GNU
190 karl 1.1 libbase=lib
191 ;;
192
193 ppc64:Linux)
194 platform=LINUX_PPC64_GNU
195 libbase=lib/64
196 ;;
197
198 s390x:Linux)
199 platform=LINUX_ZSERIES64_GNU
200 libbase=lib/64
201 ;;
202
203 s390:Linux)
204 platform=LINUX_ZSERIES_GNU
205 libbase=lib/64
206 ;;
207
208
209 *)
210
211 karl 1.1 unresolved=1
212 ;;
213
214 esac
215
216 if [ "unresolved" = "1" ]; then
217 Machine=`(Uname -m) 2>/dev/null`||Machine=unknown
218 System=`(Uname -s) 2>/dev/null`||System=unknown
219 Token="$Machine:$System"
220
221
222 case "$Token" in
223
224 alpha:VMS)
225 platform=VMS_ALPHA_DECCXX
226 libbase=lib
227 ;;
228
229 IA64:OpenVMS)
230 platform=VMS_IA64_DECCXX
231 libbase=lib/64
232 karl 1.1 ;;
233
234 *)
235 echo "$0: Failed to guess platform"
236 echo " machine=$machine"
237 echo " system=$system"
238 exit 1
239 ;;
240
241 esac
242 fi
243 fi
244
245 ##==============================================================================
246 ##
247 ## Resolve default directory names.
248 ##
249 ##==============================================================================
250
251 # --prefix:
252
253 karl 1.1 if [ -z "$prefix" ]; then
254 prefix=`pwd`
255 fi
256
257 # --bindir:
258
259 if [ -z "$bindir" ]; then
260 bindir=$prefix/bin
261 fi
262
263 # --sbindir:
264
265 if [ -z "$sbindir" ]; then
266 sbindir=$prefix/sbin
267 fi
268
269 # --libdir:
270
271 if [ -z "$libdir" ]; then
272 libdir=$prefix/$libbase
273 fi
274 karl 1.1
275 # --includedir:
276
277 if [ -z "$includedir" ]; then
278 includedir=$prefix/include
279 fi
280
281 if [ -z "$with_pam" ]; then
282 with_pam=/etc/pam.d
283 fi
284
285 ##=============================================================================
286 ##
287 ##Check for Pre-Requsite
288 ##
289 ##============================================================================
290
291 path="$PATH"
292 IFS=":"
293 ccYes=0
294 missing=0
295 karl 1.1 cmdlist="cc:gcc:g++:make"
296 for cc in $cmdlist
297 do
298 echo "checking for $cc"
299 for i in $path
300 do
301 if test -f $i/$cc; then
302 ccYes=1
303 break
304 fi
305 done
306
307 if [ "$ccYes" = "1" ];
308 then
309 echo "$cc :yes"
310 else
311 echo "$cc :no"
312 missing=1
313 break
314 fi
315 done
316 karl 1.1
317 if [ "missing" = "1" ]; then
318 echo "$0: missing dependency $cc"
319 exit 1;
320 fi
321
322 ##==============================================================================
323 ##
324 ## Detect openssl.
325 ##
326 ##==============================================================================
327 enable_ssl=0
328 with_ssl=""
329 if [ "$tiny" != "1" ] ;then
330 sslcmd="openssl"
331 sslYes=0
332 echo "checking for $sslcmd"
333 for i in $path
334 do
335 if test -f $i/$sslcmd; then
336 sslYes=1
337 karl 1.1 withssl=$i
338 break
339 fi
340 done
341 if [ "$sslYes" = "1" ]; then
342 echo "ssl: Yes = $withssl/$sslcmd"
343 with_ssl=${withssl%/*}
344 else
345 echo "ssl: No"
346 fi
347
348 if [ ! -z "$with_ssl" ]; then
349
350 if [ ! -d "$with_ssl" ]; then
351 echo "$0: Error: No such directory: --with-ssl=$with_ssl"
352 exit 1;
353 fi
354
355 if [ ! -f "$with_ssl/include/openssl/ssl.h" ]; then
356 echo "$0: missing dependency: \$with_ssl/include/openssl/ssl.h"
357 missing=1
358 karl 1.1 fi
359
360 if [ ! -f "$with_ssl/$libbase/libssl.so" ]; then
361 echo "$0: missing dependency: \$with_ssl/$libbase/libss.so"
362 missing=1
363 fi
364
365 if [ "$missing" = "1" ]; then
366 echo "$0: where --with-ssl=$with_ssl"
367 unset with_ssl
368 else
369 enable_ssl=1
370 fi
371
372 fi
373 fi
374 ##==============================================================================
375 ##
376 ## Detect openslp.
377 ## Note that if openslp is not found it should use pegasus slp.
378 ##
379 karl 1.1 ##==============================================================================
380 enable_slp=0
381 with_openslp=""
382 enable_openslp=0
383 if [ "$tiny" != "1" ] ;then
384 slpcmd="slptool"
385 slpYes=0
386 echo "checking for openslp"
387 for i in $path
388 do
389 if test -f $i/$slpcmd; then
390 slpYes=1
391 withslp=$i
392 break
393 fi
394 done
395 if [ "$slpYes" = "1" ]; then
396 echo "slp: Yes = $withslp/$slpcmd"
397 with_openslp=${withslp%/*}
398 else
399 echo "slp: No"
400 karl 1.1 fi
401
402
403
404 if [ ! -z "$with_openslp" ]; then
405
406 if [ ! -d "$with_openslp" ]; then
407 echo "$0: Error: No such directory: --with-openslp=$with_openslp"
408 exit 1;
409 fi
410
411 if [ ! -f "$with_openslp/include/slp.h" ]; then
412 echo "$0: missing dependency: \$with_openslp/include/slp.h"
413 missing=1
414 fi
415
416 if [ ! -f "$with_openslp/$libbase/libslp.so" ]; then
417 echo "$0: missing dependency: \$with_openslp/$libbase/libslp.so"
418 missing=1
419 fi
420
421 karl 1.1 if [ "$missing" = "1" ]; then
422 echo "$0: where --with-openslp=$with_openslp"
423 enable_slp=1
424 else
425 enable_openslp=1
426 fi
427
428 fi
429 fi
430
431 ##==============================================================================
432 ##
433 ## Detect sqlite.
434 ##
435 ##==============================================================================
436 enable_sql=0
437
438 if [ "$tiny" != "1" ] ;then
439 sqlcmd="sqlite3"
440 sqlYes=0
441 echo "checking for sql"
442 karl 1.1 for i in $path
443 do
444 if test -f $i/$sqlcmd; then
445 sqlYes=1
446 withsql=$i
447 break
448 fi
449 done
450 if [ "$sqlYes" = "1" ]; then
451 echo "sql: Yes = $withsql/$sqlcmd"
452 with_sql=${withsql%/*}
453 else
454 echo "sql: No"
455 fi
456
457
458
459 if [ ! -z "$with_sql" ]; then
460
461 if [ ! -d "$with_sql" ]; then
462 echo "$0: Error: No such directory: $with_sql"
463 karl 1.1 exit 1;
464 fi
465
466 if [ ! -f "$with_sql/lib64/libsqlite3.so" ]; then
467 echo "$0: missing dependency: \$with_sql/lib64/libsqlite3.so"
468 missing=1
469 fi
470 if [ ! -f "$with_sql/include/sqlite3.h" ]; then
471 echo "$0:missing dependency :\$with_sql/include/sqlite3.h"
472 missing=1
473 fi
474 if [ "$missing" = "1" ]; then
475 echo "$0: sql not installed properly at $with_sql"
476 else
477 enable_sql=1
478 fi
479
480 fi
481 fi
482
483 ##==============================================================================
484 karl 1.1 ##
485 ## Detect net-snmp.
486 ##
487 ##==============================================================================
488
489 enable_snmp=0
490 if [ "$tiny" != "1" ]; then
491 snmpcmd="net-snmp-config"
492 snmpYes=0
493 echo "checking for net-snmp"
494 for i in $path
495 do
496 if test -f $i/$snmpcmd; then
497 snmpYes=1
498 withsnmp=$i
499 break
500 fi
501 done
502 if [ "$snmpYes" = "1" ]; then
503 echo "snmp: Yes = $withsnmp/$snmpcmd"
504 with_snmp=${withsnmp%/*}
505 karl 1.1 else
506 echo "snmp: No"
507 fi
508
509
510
511 if [ ! -z "$with_snmp" ]; then
512
513 if [ ! -d "$with_snmp" ]; then
514 echo "$0: Error: No such directory: $with_snmp"
515 exit 1;
516 fi
517
518 if [ ! -f "$with_snmp/lib64/libnetsnmp.so" ]; then
519 echo "$0: missing dependency: "
520 missing=1
521 fi
522
523 if [ "$missing" = "1" ]; then
524 echo "$0: snmp not installed properly at $with_snmp"
525 else
526 karl 1.1 enable_snmp=1
527 fi
528
529 fi
530 fi
531
532 ##=============================================================================
533 ##
534 ##Detect icu ( Currently supported till 3.6)
535 ##
536 ##=============================================================================
537 supporticu=0
538 if [ "$tiny" != "1" ] ;then
539 icucmd="icu-config"
540 gencmd="genrb"
541 icuYes=0
542 echo "checking for icu"
543 for i in $path
544 do
545 if test -f $i/$icucmd ;then
546 if test -f $i/$gencmd ; then
547 karl 1.1 icuYes=1
548 withicu=$i
549 break
550 fi
551 fi
552 done
553 if [ "$icuYes" = "1" ]; then
554 echo "icu: Yes = $withicu/$icucmd"
555 with_icu=${withicu%/*}
556 else
557 echo "icu: No"
558 fi
559
|
561 karl 1.1 icuversion=$(icu-config --version)
562
563 echo $icuversion
564 IFS='.'
565 op=0
566 for i in $icuversion
567 do
568 if [ "$op" = "0" ]; then
569 icumajor=$i
570 fi
571 if [ "$op" = "1" ]; then
572 icuminor=$i
573 fi
574 if [ "$op" -gt "1" ]; then
575 break
576 fi
577 op=$((op+1))
578 done
579 IFS='@@@'
580 supporticu=0
581
582 karl 1.1 if [ "$icumajor" -le "3" -a "$icuminor" -le "6" ]; then
583 supporticu=1
584 fi
585
586 if [ "$supporticu" = "1" ]; then
587
588 if test -f $with_icu/$libbase/libicul18n.so; then
589 echo " missing dependency "
590 missing=1
591 supporticu=0
592 fi
593 fi
594
595 fi
596
597 fi
598
599 ##=============================================================================
600 ##
601 ##Detect libz
602 ##
603 karl 1.1 ##=============================================================================
604 libzpath=/usr
605 enable_libz=1
606 if [ ! -f "$libzpath/$libbase/libz.so" ]; then
607 echo " libz not found"
608 enable_libz=0
609 fi
610 if [ ! -f "$libzpath/include/zlib.h" ]; then
611 echo " libz not found"
612 enable_libz=0
613 fi
614
615 if [ "$libbase" = "lib64" ]; then
616 enable_32bit=1
617 fi
618
619 ##==============================================================================
620 ##
621 ## These options (if non-empty) must denote absolute directory names.
622 ##
623 ##==============================================================================
624 karl 1.1
625 for i in \
626 prefix \
627 bindir \
628 sbindir \
629 libdir \
630 includedir \
631 datadir
632 do
633
634 eval v=$`echo $i`
635
636 case $v in
637 /* | "")
638 ;;
639
640 *)
641 echo "$0: Error: Must be an absolute directory name: --$i=$v"
642 exit 1;
643 ;;
644 esac
645 karl 1.1
646 done
647 if [ "$tiny" != "1" ] ;then
648 for i in \
649 with_ssl \
650 with_pam
651 do
652
653 eval v=$`echo $i`
654
655 case $v in
656 /* | "")
657 ;;
658
659 *)
660 echo "$0: Error: Must be an absolute directory name: --$i=$v"
661 exit 1;
662 ;;
663 esac
664
665 done
666 karl 1.1 fi
667
668 ##==============================================================================
669 ##
670 ## Check whether the test user will be able to access pegasus home.
671 ##
672 ##==============================================================================
673 if [ "$test_option" = "-1" ] ; then
674 with_test_user=guest
675 with_test_user_pass=guest
676 uid=`id -u`
677 cwd=`/bin/pwd`
678
679 if [ "$uid" = "0" -a "$disable_tests" != "1" ]; then
680
681 if [ "$enable_pam" = "1" -o "$enable_pam_standalone" = "1" ]; then
682
683 su $with_test_user -c "/bin/true"
684
685 if [ "$?" != "0" ]; then
686 echo "$0: The test user account ($with_test_user) does not exist on this system. Please create a test user with this name or designate an existing one with the --with-test-user option."
687 karl 1.1 exit 1
688 fi
689
690 su $with_test_user -c "cd $cwd 2> /dev/null"
691
692 if [ "$?" != "0" ]; then
693 echo "$0: The test user account ($with_test_user) has insufficient privileges to access the pegasus root directory ($cwd), which will cause the user-context tests to fail. Please configure from a different directory."
694 exit 1
695 fi
696 else
697 echo "Warning: Using --with-test-user without --enable_pam or --enable-pam-standalone"
698 fi
699
700
701 fi
702 fi
703 ##==============================================================================
704 ##
705 ## Detect pam
706 ##
707 ##==============================================================================
708 karl 1.1 enable_pam=0
709 if [ "$tiny" != "1" ] ;then
710 pamcmd="pam_console_apply"
711 pamYes=0
712 IFS=':'
713 echo "checking for pam"
714 for i in $path
715 do
716 if test -f $i/$pamcmd; then
717 pamYes=1
718 withpam=$i
719 break
720 fi
721 done
722 if [ "$pamYes" = "1" ]; then
723 echo "pam: Yes = $withpam/$pamcmd"
724 with_pam=${withpam%/*}
725 if [ $with_pam = "" ]; then
726 with_pam=/
727 fi
728 else
729 karl 1.1 echo "pam: No"
730 fi
731
732
733 if [ ! -z "$with_pam" ]
734 then
735
736 if [ ! -f "/usr/include/security/pam_appl.h" -a \
737 ! -f "/usr/local/include/security/pam_appl.h" ]
738 then
739 echo "$0: <security/pam_appl.h> is missing (required by --enable_pam)"
740 exit 1
741 else
742 enable_pam=1
743
744 fi
745
746 fi
747 fi
748
749
750 karl 1.1 ##==============================================================================
751 ##
752 ## Create options.mak
753 ##
754 ##==============================================================================
755
756 options=options.mak
757 rm -f $options
758 echo "# This file was generated by configure." >> $options
759 echo "# ./configure $*" >> $options
760 PEGASUS_HOME=$prefix
761 PEGASUS_ROOT=$prefix
762 PEGASUS_PLATFORM=$platform
763 echo "export ROOT=$prefix" >> $options
764 #echo "export PATH=$PATH:$cwd/$platform/bin" >> $options
765 #echo "export LD_LIBRARY_PATH=$cwd/$platform/lib:$libdir" >> $options
766 echo "export PEGASUS_PLATFORM=$platform" >> $options
767 echo "export PEGASUS_ROOT=$prefix" >> $options
768 echo "export PEGASUS_HOME=$prefix" >> $options
769
770 if [ "$tiny" != "1" ];
771 karl 1.1 then
772 enable_debug=1
773 interop_name=root/PG_InterOp
774 echo "export PEGASUS_ENABLE_AUDIT_LOGGER=true" >> $options
775 echo "export PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT=true" >> $options
776 echo "export PEGASUS_ENABLE_EMAIL_HANDLER=true" >> $options
777 echo "export PEGASUS_ENABLE_INDICATION_COUNT=true" >> $options
778 echo "export PEGASUS_ENABLE_INTEROP_PROVIDER=true" >> $options
779 if [ "$dis_wsman" != "1" ]; then
780 echo "export PEGASUS_ENABLE_PROTOCOL_WSMAN=true" >> $options
781 fi
782 echo "export PEGASUS_ENABLE_SYSTEM_LOG_HANDLER=true" >> $options
783 echo "export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true" >> $options
784 #echo "export PEGASUS_ENABLE_PRIVILEGE_SEPARATION=true" >>$options
785 fi
786
787
788 if [ "$disable_oop" = "1" ]
789 then
790 echo "export PEGASUS_DEFAULT_ENABLE_OOP=false" >> $options
791 echo "export PEGASUS_DISABLE_PROV_USERCTXT=1" >> $options
792 karl 1.1 echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=true" >> $options
793 fi
794
795 echo "export PEGASUS_ENABLE_CQL=true" >> $options
796 echo "export PEGASUS_ENABLE_WQL=true" >> $options
797
798 if [ "$disable_ipv6" = "1" ];
799 then
800 echo "export PEGASUS_ENABLE_IPV6=false" >> $options
801 else
802 echo "export PEGASUS_ENABLE_IPV6=true" >> $options
803 fi
804
805 echo "export PEGASUS_INTEROP_NAMESPACE=$interop_name" >> $options
806 if [ "$disable_trace" = "1" ];
807 then
808 echo "export PEGASUS_REMOVE_TRACE=1" >> $options
809 fi
810
811 if [ "$disable_tests" = "1" ];
812 then
813 karl 1.1 echo "export PEGASUS_SKIP_MOST_TEST_DIRS=true" >> $options
814 fi
815 if [ "$enable_perinst" = "1" ];
816 then
817 echo "export PEGASUS_DISABLE_PERFINST=true" >> $options
818 echo "export PEGASUS_INDICATION_PERFINST=true" >> $options
819 fi
820
821 if [ "$enable_debug" = 1 ]
822 then
823 echo "export PEGASUS_DEBUG=1" >> $options
824 fi
825
826 if [ "$enable_mrr_generation" = 1 ]
827 then
828 echo "export PEGASUS_ENABLE_MRR_GENERATION=1" >> $options
829 fi
830
831 if [ "$enable_mrr" = 1 ]
832 then
833 echo "export PEGASUS_ENABLE_MRR=1" >> $options
834 karl 1.1 fi
835 if [ "$enable_pam" = "1" ]; then
836 echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
837 echo "export PEGASUS_USE_PAM_STANDALONE_PROC=true" >> $options
838 \cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
839 chmod 0644 /etc/pam.d/wbem
840 fi
841
842 if [ "$enable_pam_standalone" = "1" ]; then
843 echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
844 echo "export PEGASUS_USE_PAM_STANDALONE_PROC=true" >> $options
845 \cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
846 chmod 0644 /etc/pam.d/wbem
847 fi
848
849 if [ "$enable_binary_repository" = "1" ]; then
850 echo "export PEGASUS_REPOSITORY_MODE=BIN" >> $options
851 fi
852
853 if [ "$enable_libz" = "1" ]; then
854 echo "export PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1" >> $options
855 karl 1.1 fi
856
857 if [ "$enable_ssl" = "1" ]; then
858 echo "export PEGASUS_HAS_SSL=true" >> $options
859 echo "export PEGASUS_ENABLE_SSL_CRL_VERIFICATION=true" >> $options
860 fi
861
862 if [ ! -z "$with_ssl" ]; then
863 echo "export OPENSSL_HOME=$with_ssl" >> $options
864 fi
865
866 if [ "$enable_slp" = "1" ]; then
867 echo "export PEGASUS_ENABLE_SLP=true" >> $options
868 fi
869
870 if [ "$enable_sql" = "1" ]; then
871 echo "export PEGASUS_USE_SQLITE_REPOSITORY=true" >> $options
872 echo "export SQLITE_HOME=$with_sql">> $options
873 fi
874 if [ "$enable_snmp" = "1" ]; then
875 echo "export PEGASUS_ENABLE_NET_SNMPV3=true" >> $options
876 karl 1.1 echo "export PEGASUS_USE_NET_SNMP=true" >> $options
877 fi
878
879 if [ "$enable_openslp" = "1" ]; then
880 echo "export PEGASUS_ENABLE_SLP=true" >> $options
881 echo "export PEGASUS_USE_EXTERNAL_SLP=openslp" >> $options
882 fi
883
884 #if [ ! -z "$with_external_slp" ]; then
885 # echo "export PEGASUS_ENABLE_SLP=true" >> $options
886 # echo "export PEGASUS_USE_EXTERNAL_SLP=$with_external_slp" >> $options
887 #fi
888
889 if [ ! -z "$with_external_slp_dir" ]; then
890 echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_external_slp_dir" >> $options
891 fi
892
893 if [ ! -z "$with_openslp" ]; then
894 echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_openslp" >> $options
895 fi
896
897 karl 1.1 if [ "$disable_cmpi" != "1" ]; then
898 echo "export PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER=true" >> $options
899 fi
900
901 if [ ! -z "$flavor" ]; then
902 echo "export PEGASUS_FLAVOR=tog">>$options
903 fi
904
905 if [ "$supporticu" = "1" ]; then
906 echo "export PEGASUS_HAS_MESSAGES=true">>$options
907 echo "export PEGASUS_HAS_ICU=true">>$options
908 echo "export PEGASUS_USE_DEFAULT_MESSAGES=true">>$options
909 # echo "export ICU_INSTALL=$with_icu">>$options
910 fi
911
912 if [ "$enable_32bit" = "1" ]; then
913 #echo "export PEGASUS_INTERNAL_ENABLE_32BIT_PROVIDER_SUPPORT=true" >> $options
914 echo "export PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT=$platform" >> $options
915 fi
916
917 if [ "$test_option" = "1" ]; then
918 karl 1.1 echo "export PEGASUS_CCOVER=true" >> $options
919 echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=false" >> $options
920 echo "export PEGASUS_ENABLE_GCOV=true" >> $options
921 echo "export PEGASUS_ENABLE_SORTED_DIFF=true" >> $options
922 echo "export PEGASUS_TEST_ENABLE_DEBUG_TRACE=true" >> $options
923 echo "export PEGASUS_TEST_ISGROUP_GROUP=root" >> $options
924 echo "export PEGASUS_TEST_ISGROUP_USER_FAILURE=test" >> $options
925 echo "export PEGASUS_TEST_ISGROUP_USER_SUCCESS=root" >> $options
926 echo "export PEGASUS_TEST_SDK=true" >> $options
927 echo "export PEGASUS_TEST_USER_DEFINED=false" >> $options
928 echo "#export PEGASUS_TEST_USER_ID=" >> $options
929 echo "#export PEGASUS_TEST_USER_PASS=" >> $options
930 echo "export PEGASUS_TEST_VALGRIND_LOG_DIR=." >> $options
931 echo "export PEGASUS_OVERRIDE_SSL_CERT_VERIFICATION_RESULT=true" >> $options
932 echo "export PEGASUS_TMP=." >> $options
933 echo "export PLATFORM_CORE_PATTERN=true" >> $options
934 fi
935 echo "export PATH=$bindir:$PATH" >> $options
936 echo "export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH" >> $options
937
938 IFS="@@@"
939 karl 1.1 export PATH=$bindir:$PATH
940 export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH
941 export PEGASUS_HOME PEGASUS_ROOT PEGASUS_PLATFORM
942
943 echo "created $options"
944
945 ## if the output file exists, make a backup
946 if [ -f $options ]; then
947 echo backup $options to $options.bak
948 cp -f $options $options.bak
949 fi
950
|
Return to
configure
CVS log
Up to [Pegasus] / pegasus