1 martin 1.99 #//%LICENSE////////////////////////////////////////////////////////////////
|
2 martin 1.32 #//
|
3 martin 1.99 #// Licensed to The Open Group (TOG) under one or more contributor license
4 #// agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
5 #// this work for additional information regarding copyright ownership.
6 #// Each contributor licenses this file to you under the OpenPegasus Open
7 #// Source License; you may not use this file except in compliance with the
8 #// License.
9 #//
10 #// Permission is hereby granted, free of charge, to any person obtaining a
11 #// copy of this software and associated documentation files (the "Software"),
12 #// to deal in the Software without restriction, including without limitation
13 #// the rights to use, copy, modify, merge, publish, distribute, sublicense,
14 #// and/or sell copies of the Software, and to permit persons to whom the
15 #// Software is furnished to do so, subject to the following conditions:
16 #//
17 #// The above copyright notice and this permission notice shall be included
18 #// in all copies or substantial portions of the Software.
19 #//
20 #// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 #// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 #// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
23 #// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
24 martin 1.99 #// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 #// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 #// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27 #//
28 #//////////////////////////////////////////////////////////////////////////
|
29 kumpf 1.1 ###############################################################################
30 ##
31 ## Test Makefile for Pegasus CIMOM
32 ##
|
33 jim.wunderlich 1.40 ## see the usage rule for documentation of rules etc.
|
34 jim.wunderlich 1.34 ##
35 ##
|
36 kumpf 1.1 ###############################################################################
37
|
38 david.dillard 1.15 error:
|
39 jim.wunderlich 1.40 @ $(ECHO) "Specify desired makefile option (i.e., unittests, usage )"
|
40 kumpf 1.1
|
41 kumpf 1.23 include $(PEGASUS_ROOT)/mak/config.mak
42 include $(PEGASUS_ROOT)/mak/test.mak
43 include $(PEGASUS_ROOT)/mak/commands.mak
44
45 system = localhost
46
|
47 jim.wunderlich 1.34 .PHONY: FORCE
48
49 FORCE:
50
|
51 jim.wunderlich 1.40 usage: FORCE
52 $(USAGE)
53 $(USAGE)"TestMakefile Primary Targets:"
54 $(USAGE)
55 $(USAGE)"The following are all standalone tests. They stop and start the server,"
56 $(USAGE)"and build repositories as needed."
57 $(USAGE)
58 $(USAGE)"alltests - Execute unittests and servertests"
59 $(USAGE)"unittests - Execute the unit functional tests - no repository"
60 $(USAGE)" or active server is required"
61 $(USAGE)"servertests - Execute a basic server test suites (No security, No SSL)"
62 $(USAGE)"standardtests - Execute an extended server test suites "
63 $(USAGE)" using multiple options."
|
64 jim.wunderlich 1.45 $(USAGE)"perftests - Executes a brief server performance test"
|
65 jim.wunderlich 1.40 $(USAGE)
66 $(USAGE)"usage2 - usage on secondary test targets"
|
67 jim.wunderlich 1.43 $(USAGE)"usagetrace - usage on trace targets"
|
68 j.alex 1.66 $(USAGE)"stresstests - Execute the default stress test suite"
|
69 jim.wunderlich 1.40 $(USAGE)
70
71 usage2: FORCE
72 $(USAGE)
73 $(USAGE)"TestMakefile Secondary Targets:"
74 $(USAGE)
75 $(USAGE)"The following are run as part of the Primary target test suites and may"
76 $(USAGE)"also be invoked as standalone tests."
77 $(USAGE)
78 $(USAGE)"TestXMLRepository - Executes poststarttests on XML repository"
79 $(USAGE)" built with cimmofl."
80 $(USAGE)"TestXMLRepositoryServer - Executes poststarttests on XML repository"
81 $(USAGE)" built with cimmof."
82 $(USAGE)"TestXMLCmpRepository - Executes poststarttests on XML compressed"
83 $(USAGE)" repository built with cimmofl."
84 $(USAGE)"TestBinRepository - Executes poststarttests on binary repository "
85 $(USAGE)" built with cimmofl."
86 $(USAGE)"TestBinRepositoryServer - Executes poststarttests on binary repository"
87 $(USAGE)" built with cimmof."
88 $(USAGE)"TestBinCmpRepository - Executes poststarttests on binary compressed"
89 $(USAGE)" repository built with cimmofl."
90 jim.wunderlich 1.40 $(USAGE)
91 $(USAGE)"The following require the repository to be pre-built."
92 $(USAGE)
|
93 sushma.fernandes 1.84 $(USAGE)"run_SSL_CBA_TS1 - Executes the Certificate based authentication test suite."
94 $(USAGE)"run_SSL_IPV4_TS1 - Executes the IPv4 SSL connection test suite."
95 $(USAGE)"run_SSL_IPV6_TS1 - Executes the IPv6 SSL connection test suite."
|
96 jim.wunderlich 1.40 $(USAGE)"run_OOP_TS1 - Executes the Out Of Process Provider tests"
|
97 kumpf 1.46 $(USAGE)"run_G11N_TS1 - Executes the Globalization tests"
|
98 jim.wunderlich 1.40 $(USAGE)
99 $(USAGE)"The following require the repository to be pre-built and the server to be started."
100 $(USAGE)
101 $(USAGE)"serversuite - the collection of test run by the servertests rule"
|
102 j.alex 1.66 $(USAGE)"run_STRESS_TS1 - Executes the stresstests"
|
103 dave.sudlik 1.78 $(USAGE)"slptests - Executes the slptests"
|
104 s.kodali 1.85 $(USAGE)"run_Cmpi_Sub - Executes the CMPI subscription tests"
|
105 jim.wunderlich 1.40 $(USAGE)
106
107
108 ##########################################################
109 #
110 # rules that are defined in Makefile
111 #
112 ##########################################################
|
113 kumpf 1.21
|
114 jim.wunderlich 1.39 build: FORCE
115 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile build
|
116 kumpf 1.21
|
117 jim.wunderlich 1.40 world: FORCE
118 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile world
119
120 new: FORCE
121 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile new
122
|
123 jim.wunderlich 1.39 clean: FORCE
|
124 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile clean
125
|
126 jim.wunderlich 1.40 depend: FORCE
127 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile depend
128
|
129 denise.eckstein 1.69 ###############################################################################
130 # mak/certificate_test.mak implements three key functions for
131 # testing Certificate-Based Authentication (CBA).
132 #
133 # setupCBATestCertificates is used to create a set of test certificates
134 # make -f TestMakefile setupCBATestCertificates
135 #
136 # runCBATestSuites is used to run a set of CBA tests
137 # make -f TestMakefile runCBATestSuites
138 #
139 # cleanupCBATestCertificates can be used to remove the test certificates
140 # make -f TestMakefile cleanupCBATestCertificates
141 ###############################################################################
142 include $(PEGASUS_ROOT)/mak/certificate_test.mak
|
143 jim.wunderlich 1.40
144 ############################################################
145 #
146 # rules defined here
147 #
148 ############################################################
149
|
150 jim.wunderlich 1.41 ##
151 ## Although the macros CIMSERVER_STOP_SERVICE and CIMSERVER_START_SERVICE
152 ## are available and could be invoked directly, their direct usage is
153 ## discouraged in favor of invoking the cimstop and the cimstart rules
154 ## as this allows one place where additional checks, delays etc may be
155 ## added in the future to control or further test the servers performance
156 ## in executing these commands.
157 ##
158
|
159 jim.wunderlich 1.40 #######################
160 #
161 # doc
162 #
|
163 kumpf 1.1 doc:
|
164 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/doc/ProviderSpec -f Makefile
165 $(MAKE) --directory=$(PEGASUS_ROOT)/doc/DevManual -f Makefile
|
166 kumpf 1.1
|
167 jim.wunderlich 1.40
168 #######################
169 #
170 # repositoryServer
171 #
172 repositoryServer: FORCE
|
173 kumpf 1.22 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
174 kumpf 1.19 $(SLEEP) 5
|
175 kumpf 1.90 $(RMREPOSITORY) $(REPOSITORY_ROOT)
|
176 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
|
177 kumpf 1.19 $(SLEEP) 5
|
178 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer
179 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer
|
180 mday 1.6
|
181 jim.wunderlich 1.40 ######################
182 #
183 # prestarttests is being deprecated since poststarttest is being deprecated
184 # in favor of name more related to its intended functionality.
185 #
186 prestarttests: prestarttests_msg shortsleep unittests
187
188 prestarttests_msg: FORCE
189 @$(ECHO) "=============================================================================="
190 @$(ECHO) "TestMakefile: The \"prestarttests\" rule is being deprecated."
191 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
192 @$(ECHO) " The equivalent new rule is \"unittests\"."
193 @$(ECHO) " Invoking the \"unittests\" rule now."
194 @$(ECHO) "=============================================================================="
195
196 ####################
197 #
198 # poststarttests is being deprecated since it multiply defines a
199 # recursive make rule leading to ambuguity and confusion.
200 #
201 poststarttests: poststarttests_msg shortsleep servertests
202 jim.wunderlich 1.40
203 poststarttests_msg: FORCE
204 @$(ECHO) "==============================================================================="
205 @$(ECHO) "TestMakefile: The \"posstarttests\" rule is being deprecated.."
206 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
207 @$(ECHO) " The equivalent new rule is \"servertests\"."
208 @$(ECHO) " Invoking the \"servertests\" rule now."
209 @$(ECHO) "==============================================================================="
210
211 #####################
212 #
213 # tests is being deprecated since it multiply defines a
214 # recursive make rule leading to ambuguity and confusion.
215 #
216 tests: tests_msg shortsleep alltests
217
218 tests_msg: FORCE
219 @$(ECHO) "==================================================================="
220 @$(ECHO) "TestMakefile: The \"tests\" rule is being deprecated."
221 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
222 @$(ECHO) " The equivalent new rule is \"alltests\"."
223 jim.wunderlich 1.40 @$(ECHO) " Invoking the \"alltests\" rule now."
224 @$(ECHO) "==================================================================="
225
226
227 shortsleep: FORCE
228 @$(SLEEP) 5
229
230 ####################
231 #
232 # unittests
233 #
234 unittests: FORCE
|
235 h.sterling 1.38 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile tests
|
236 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile unittests complete"
237
238 #####################
239 #
240 # servertests
241 #
|
242 kumpf 1.1
|
243 jim.wunderlich 1.40 servertestsclean: FORCE
|
244 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
245 lucier 1.17 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/CQL/tests/Queries -f Makefile clean
246 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/Query/QueryExpression/tests/Queries -f Makefile clean
|
247 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile clean
|
248 jim.wunderlich 1.31
|
249 jim.wunderlich 1.40 servertestssetup: FORCE
|
250 denise.eckstein 1.50 ifdef PEGASUS_HAS_SSL
|
251 jim.wunderlich 1.61 #
252 # The association between user names and certificates is stored in the
253 # repository. If the repository is recreated, we also need to re-initialize
254 # the trust store directories. Otherwise, the truststore content will be
255 # out-of-sync with the mapping stored in the repository.
256 #
|
257 w.otsuka 1.76 # NOTE: Tests that require their own test namespaces to run poststarttests
258 # should add their namespace creation make commands to pegasus/Makefile
259 # under the testrepository tag.
260 #
|
261 denise.eckstein 1.50 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile removeSSLTrustDirectories
262 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile createSSLTrustDirectories
263 endif
|
264 jim.wunderlich 1.40 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
265 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository
|
266 denise.eckstein 1.69 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
267 cleanupCBATestCertificates
268 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
269 setupCBATestCertificates
|
270 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
|
271 kumpf 1.19 $(SLEEP) 5
|
272 jim.wunderlich 1.61 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
273 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile Create_SSL_Certificate
|
274 denise.eckstein 1.73 ifeq ($(PEGASUS_TEST_SDK),true)
275 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples -f Makefile setupSDK
276 endif
|
277 kumpf 1.98 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
|
278 denise.eckstein 1.73
|
279 dave.sudlik 1.78 # slptests are run under separate target because these testcases require that
280 # both the cimserver and SLP are running. There is no need for special options
281 # while starting cimserver.
282 slptests:
283 $(MAKE) --directory=$(PEGASUS_ROOT)/src/slp/tests/slptests -f Makefile slptests
284 @ $(ECHO) "+++++ TestMakefile slp test suite completed"
|
285 jim.wunderlich 1.40
286 servertests: servertestsclean servertestssetup serversuite
287 @ $(ECHO) "+++++ TestMakefile servertests suites complete"
288
289 serversuite: FORCE
|
290 kumpf 1.98 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/Server/tests -f Makefile commandtests
291 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
|
292 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests
|
293 jim.wunderlich 1.33 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestBinRepository
|
294 w.otsuka 1.76 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_Cimsub_InterOp
|
295 kumpf 1.20 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOP_TS1
|
296 carolann.graves 1.28 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_IndInit_TS1
|
297 carolann.graves 1.67 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS1
298 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS2
|
299 carolann.graves 1.74 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS3
|
300 denise.eckstein 1.47 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_INDSSL_TS1
|
301 sushma.fernandes 1.84 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_IPV4_TS1
302 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_IPV6_TS1
303 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_CBA_TS1
|
304 kumpf 1.46 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_G11N_TS1
|
305 denise.eckstein 1.69 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile runCBATestSuites
|
306 denise.eckstein 1.73 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SDK_TS1
|
307 carolann.graves 1.75 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_ExportClientSSL_TS1
|
308 kumpf 1.87 ifeq ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER),true)
|
309 s.kodali 1.85 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_Cmpi_Sub
310 endif
|
311 dave.sudlik 1.88 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_idleConnectionTimeout1
312 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_idleConnectionTimeout2
|
313 kumpf 1.1
|
314 j.alex 1.66 #####################
315 #
316 # stresstests
317 #
318 stresstests:
319 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_STRESS_TS1
320
|
321 jim.wunderlich 1.40 ####################
322 #
|
323 jim.wunderlich 1.45 # perftests - simple performance test until we have better
324 #
325 # - Turns statistics on (uses TestInterop until we have better)
|
326 kumpf 1.81 # - runs poststarttests suite and TestBenchmark
|
327 jim.wunderlich 1.45 # - runs cimperf to displat the statistics
328 # - turns statistics off
329 #
330 perftests: servertestsclean servertestssetup perfsuite
331
332 perfsuite: FORCE
333 $(PEGASUS_HOME)/bin/TestInterop on
334 $(TIME_CMD) $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile poststarttests
335 @ $(ECHO) " "
336 $(TIME_CMD) $(PEGASUS_HOME)/bin/TestClient
337 @ $(ECHO) " "
|
338 kumpf 1.81 $(TIME_CMD) $(PEGASUS_HOME)/bin/TestBenchmark
|
339 jim.wunderlich 1.45 @ $(ECHO) " "
340 @ $(ECHO) " "
341 $(TIME_CMD) $(PEGASUS_HOME)/bin/cimperf
342 @ $(ECHO) " "
343 $(PEGASUS_HOME)/bin/TestInterop off
344
|
345 jim.wunderlich 1.40
346 ####################
347 #
348 # alltests
349 #
350 alltests: unittests servertests
|
351 a.dunfey 1.79 ifeq ($(OS_TYPE),windows)
|
352 kumpf 1.22 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
353 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile uninstall
|
354 tony 1.5 endif
|
355 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile alltests Complete"
|
356 kumpf 1.1
357 ###############################################################################
|
358 denise.eckstein 1.18 ## Test Suite Definitions
359 ###############################################################################
360
361 ###############################################################################
362 ## OOP Test Suite 1: "Out-of-Process"(OOP) Provider Tests
363 ##
364 ## Configuration Options: forceProviderProcesses=true
365 ##
|
366 jim.wunderlich 1.54 ## If PEGASUS_DEFAULT_ENABLE_OOP is set, then tests are run with OOP disabled
|
367 jim.wunderlich 1.51 ## since tests have already been run with OOP enabled.
368 ##
369 ##
|
370 denise.eckstein 1.18 ###############################################################################
|
371 jim.wunderlich 1.54 ifeq ($(PEGASUS_DEFAULT_ENABLE_OOP),true)
|
372 jim.wunderlich 1.52 OOP_TS1_CONFIG_OPTIONS = forceProviderProcesses=false
373 else
|
374 denise.eckstein 1.18 OOP_TS1_CONFIG_OPTIONS = forceProviderProcesses=true
|
375 kumpf 1.44 endif
|
376 jim.wunderlich 1.51
|
377 kumpf 1.96 ifeq ($(PEGASUS_ENABLE_PRIVILEGE_SEPARATION),true)
378 # When privilege separation is enabled, most providers run out of process
379 # regardless of the forceProviderProcesses setting. The exception is
380 # providers that register with UserContext = 5 (CIM Server). The only
381 # case of this in the automated tests is the UserContextTestProvider.
382 OOP_TS1_TEST_CMDS = \
383 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/UserContextTestProvider/testclient@@poststarttests
384 else
385 OOP_TS1_TEST_CMDS = \
386 $(MAKE)@@--directory=$(PEGASUS_ROOT)@@-f@@Makefile@@poststarttests
387 endif
|
388 denise.eckstein 1.18
389 run_OOP_TS1:
|
390 denise.eckstein 1.26 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
391 denise.eckstein 1.18 CIMSERVER_CONFIG_OPTIONS="$(OOP_TS1_CONFIG_OPTIONS)" \
392 TESTSUITE_CMDS="$(OOP_TS1_TEST_CMDS)"
|
393 jim.wunderlich 1.51
|
394 denise.eckstein 1.18 ###############################################################################
395
396 ###############################################################################
|
397 carolann.graves 1.28 ## IndInit Test Suite 1: IndicationService Initialization Tests
398 ##
399 ## Configuration Options: (none)
400 ##
401 ###############################################################################
402 IndInit_TS1_CONFIG_OPTIONS =
403 IndInit_TS1a_TEST_CMDS = \
404 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/IndicationService/tests/ProcessIndication@@IndInit_TS1a
405 IndInit_TS1b_TEST_CMDS = \
406 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/IndicationService/tests/ProcessIndication@@IndInit_TS1b
407
408 run_IndInit_TS1:
409 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
410 CIMSERVER_CONFIG_OPTIONS="$(IndInit_TS1_CONFIG_OPTIONS)" \
411 TESTSUITE_CMDS="$(IndInit_TS1a_TEST_CMDS)"
412 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
413 CIMSERVER_CONFIG_OPTIONS="$(IndInit_TS1_CONFIG_OPTIONS)" \
414 TESTSUITE_CMDS="$(IndInit_TS1b_TEST_CMDS)"
415
416 ###############################################################################
|
417 carolann.graves 1.67 ## OOPProvFail Test Suite 1: OOP Provider Module Failure Tests
418 ##
419 ## Configuration Options: forceProviderProcesses=true
420 ## enableAuthentication=true, enableAuthentication=false
421 ##
422 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
423 ## suite is always run with OOP enabled. This test suite causes a provider to
424 ## exit. Running this test suite with OOP disabled would cause the cimserver
425 ## to exit and the test suite to fail.
426 ##
427 ## NOTE: The test is run once with authentication enabled, and once without
428 ## authentication enabled.
429 ##
430 ###############################################################################
431 OOPProvFail_TS1a_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true
432 OOPProvFail_TS1b_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=false
433 OOPProvFail_TS1_TEST_CMDS = \
434 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS1
435
|
436 carolann.graves 1.68 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
437 carolann.graves 1.67 run_OOPProvFail_TS1:
438 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
439 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS1a_CONFIG_OPTIONS)" \
440 TESTSUITE_CMDS="$(OOPProvFail_TS1_TEST_CMDS)"
441 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
442 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS1b_CONFIG_OPTIONS)" \
443 TESTSUITE_CMDS="$(OOPProvFail_TS1_TEST_CMDS)"
|
444 carolann.graves 1.68 else
445 run_OOPProvFail_TS1: FORCE
446 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS1"
447 endif
|
448 carolann.graves 1.67
449 ###############################################################################
450 ## OOPProvFail Test Suite 2: OOP Provider Module Failure on IndicationService
451 ## Initialization Tests
452 ##
453 ## Configuration Options: forceProviderProcesses=true
454 ## enableAuthentication=true
455 ##
456 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
457 ## suite is always run with OOP enabled. This test suite causes a provider to
458 ## exit. Running this test suite with OOP disabled would cause the cimserver
459 ## to exit and the test suite to fail.
460 ##
461 ###############################################################################
462 OOPProvFail_TS2_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true
463 OOPProvFail_TS2a_TEST_CMDS = \
464 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS2a
465 OOPProvFail_TS2b_TEST_CMDS = \
466 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS2b
467
|
468 carolann.graves 1.68 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
469 carolann.graves 1.67 run_OOPProvFail_TS2:
470 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
471 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS2_CONFIG_OPTIONS)" \
472 TESTSUITE_CMDS="$(OOPProvFail_TS2a_TEST_CMDS)"
473 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
474 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS2_CONFIG_OPTIONS)" \
475 TESTSUITE_CMDS="$(OOPProvFail_TS2b_TEST_CMDS)"
|
476 carolann.graves 1.68 else
477 run_OOPProvFail_TS2: FORCE
478 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS2"
479 endif
|
480 carolann.graves 1.67
481 ###############################################################################
|
482 carolann.graves 1.74 ## OOPProvFail Test Suite 3: OOP Provider Module Failure CIM Server restart
483 ## Tests
484 ##
485 ## Configuration Options: forceProviderProcesses=true
486 ## enableAuthentication=true
487 ##
488 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
489 ## suite is always run with OOP enabled. This test suite causes a provider to
490 ## exit. Running this test suite with OOP disabled would cause the cimserver
491 ## to exit and the test suite to fail.
492 ##
493 ###############################################################################
494 OOPProvFail_TS3_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true
495 OOPProvFail_TS3a_TEST_CMDS = \
496 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS3a
497 OOPProvFail_TS3b_TEST_CMDS = \
498 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS3b
499
500 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
501 run_OOPProvFail_TS3:
502 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
503 carolann.graves 1.74 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS3_CONFIG_OPTIONS)" \
504 TESTSUITE_CMDS="$(OOPProvFail_TS3a_TEST_CMDS)"
505 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
506 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS3_CONFIG_OPTIONS)" \
507 TESTSUITE_CMDS="$(OOPProvFail_TS3b_TEST_CMDS)"
508 else
509 run_OOPProvFail_TS3: FORCE
510 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS3"
511 endif
512
513 ###############################################################################
|
514 denise.eckstein 1.47 ## Indication SSL Test Suite 1: Indication Testing over HTTPS
515 ##
516 ## Configuration Options: (none)
517 ##
518 ###############################################################################
|
519 denise.eckstein 1.50 INDSSL_TS1a_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=false
|
520 denise.eckstein 1.47 INDSSL_TS1a_TEST_CMDS = \
|
521 denise.eckstein 1.50 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient@@-f@@Makefile@@run_TS1_AuthenticationDisabled
522
523 INDSSL_TS1b_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=true sslClientVerificationMode=required
|
524 denise.eckstein 1.47 INDSSL_TS1b_TEST_CMDS = \
|
525 denise.eckstein 1.50 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient@@-f@@Makefile@@run_TS1_AuthenticationEnabled
526
|
527 denise.eckstein 1.47
528 ifdef PEGASUS_HAS_SSL
|
529 jim.wunderlich 1.53 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
530 jim.wunderlich 1.61 run_INDSSL_TS1: EnableUsers Create_SSL_Certificate_ignore
|
531 denise.eckstein 1.47 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
532 denise.eckstein 1.50 CIMSERVER_CONFIG_OPTIONS="$(INDSSL_TS1a_CONFIG_OPTIONS)" \
|
533 denise.eckstein 1.47 TESTSUITE_CMDS="$(INDSSL_TS1a_TEST_CMDS)"
534 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
535 denise.eckstein 1.50 CIMSERVER_CONFIG_OPTIONS="$(INDSSL_TS1b_CONFIG_OPTIONS)" \
|
536 denise.eckstein 1.47 TESTSUITE_CMDS="$(INDSSL_TS1b_TEST_CMDS)"
537 else
538 run_INDSSL_TS1: FORCE
|
539 jim.wunderlich 1.53 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_INDSSL_TS1"
540 endif
541 else
542 run_INDSSL_TS1: FORCE
543 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_INDSSL_TS1"
|
544 denise.eckstein 1.47 endif
545
546
547 ###############################################################################
548
549 ###############################################################################
|
550 sushma.fernandes 1.84 ## SSL IPv4 Test Suite : Tests SSL connections for IPv4
551 ##
552 ## Configuration Options: enableHttpsConnection=true
553 ## NOTE : Authentication is not enabled as we are only verifying
554 ## if SSL based IPv6 connections are working correctly. The osinfo
555 ## client requires a password to be passed for a remote connection
556 ## otherwise it will prompt for one. As a work around,
557 ## we are providing a dummy password.
558 ##
559 ###############################################################################
|
560 ouyang.jian 1.91 SSL_IPV4_TS1_CONFIG_OPTIONS = enableHttpsConnection=true \
561 enableAuthentication=false
|
562 sushma.fernandes 1.84 SSL_IPV4_TS1_CMD_1 = \
563 osinfo -s -w notapassword -h 127.0.0.1 -p 5989
564 SSL_IPV4_TS1_CMD_2 = \
565 osinfo -s -w notapassword -h localhost -p 5989
566
567 ifdef PEGASUS_HAS_SSL
568 run_SSL_IPV4_TS1: FORCE
569 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
570 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV4_TS1_CONFIG_OPTIONS)" \
571 TESTSUITE_CMDS="$(SSL_IPV4_TS1_CMD_1)"
572 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
573 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV4_TS1_CONFIG_OPTIONS)" \
574 TESTSUITE_CMDS="$(SSL_IPV4_TS1_CMD_2)"
575 else
576 run_SSL_IPV4_TS1: FORCE
577 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_IPV4_TS1"
578 endif
579
580 ###############################################################################
581 ## SSL IPv6 Test Suite : Tests SSL connections for IPv6
582 ##
583 sushma.fernandes 1.84 ## Configuration Options: enableHttpsConnection=true
584 ## NOTE : Authentication is not enabled as we are only verifying
585 ## if SSL based IPv6 connections are working correctly. The osinfo
586 ## client requires a password to be passed for a remote connection
587 ## otherwise it will prompt for one. As a work around,
588 ## we are providing a dummy password.
589 ##
|
590 sushma.fernandes 1.86 ## The IPv4-mapped IPv6 address test is only enabled for unix
591 ## platforms as Windows does not support IPv4-mapped IPv6 addresses
592 ## on certain versions.
593 ##
|
594 sushma.fernandes 1.84 ###############################################################################
|
595 ouyang.jian 1.91 SSL_IPV6_TS1_CONFIG_OPTIONS = enableHttpsConnection=true \
596 enableAuthentication=false
|
597 sushma.fernandes 1.84 SSL_IPV6_TS1_CMD_1 = \
598 osinfo -s -w notapassword -h ::1 -p 5989
599 SSL_IPV6_TS1_CMD_2 = \
600 osinfo -s -w notapassword -h ::ffff:127.0.0.1 -p 5989
601
602 ifdef PEGASUS_HAS_SSL
603 run_SSL_IPV6_TS1: FORCE
604 ifeq ($(PEGASUS_TEST_IPV6), true)
605 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
606 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV6_TS1_CONFIG_OPTIONS)" \
607 TESTSUITE_CMDS="$(SSL_IPV6_TS1_CMD_1)"
|
608 sushma.fernandes 1.86 ifeq ($(OS_TYPE), unix)
|
609 sushma.fernandes 1.84 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
610 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV6_TS1_CONFIG_OPTIONS)" \
611 TESTSUITE_CMDS="$(SSL_IPV6_TS1_CMD_2)"
|
612 sushma.fernandes 1.86 endif
|
613 sushma.fernandes 1.84 else
614 @ $(ECHO) "+++++ PEGASUS_TEST_IPV6 not defined: Skipping run_SSL_IPV6_TS1"
615 endif
616 else
617 run_SSL_IPV6_TS1: FORCE
618 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_IPV6_TS1"
619 endif
620
621 ###############################################################################
622 ## CBA SSL Test Suite 1: Certificate based authentication Tests
|
623 nag.boranna 1.27 ##
624 ## Configuration Options: enableAuthentication=true
625 ## enableHttpsConnection=true
626 ## sslClientVerificationMode=optional
627 ## sslTrustStoreUserName=$(CURRENT_USER)
628 ##
629 ###############################################################################
|
630 sushma.fernandes 1.84 SSL_CBA_TS1_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=true \
|
631 nag.boranna 1.27 sslClientVerificationMode=optional sslTrustStoreUserName=$(CURRENT_USER)
|
632 sushma.fernandes 1.84 SSL_CBA_TS1_TEST_CMD_1 = \
|
633 sushma.fernandes 1.71 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Clients/cimtrust/tests@@SSLCertificateTest1
|
634 sushma.fernandes 1.84 SSL_CBA_TS1_TEST_CMD_2 = \
|
635 sushma.fernandes 1.72 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Clients/cimcrl/tests@@SSLCRLTest1
|
636 nag.boranna 1.27
|
637 jim.wunderlich 1.39 ifdef PEGASUS_HAS_SSL
|
638 jim.wunderlich 1.53 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
639 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
|
640 nag.boranna 1.27 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
641 sushma.fernandes 1.84 CIMSERVER_CONFIG_OPTIONS="$(SSL_CBA_TS1_CONFIG_OPTIONS)" \
642 TESTSUITE_CMDS="$(SSL_CBA_TS1_TEST_CMD_1)"
|
643 sushma.fernandes 1.72 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
644 sushma.fernandes 1.84 CIMSERVER_CONFIG_OPTIONS="$(SSL_CBA_TS1_CONFIG_OPTIONS)" \
645 TESTSUITE_CMDS="$(SSL_CBA_TS1_TEST_CMD_2)"
|
646 jim.wunderlich 1.39 else
|
647 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
648 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_SSL_CBA_TS1"
|
649 jim.wunderlich 1.53 endif
650 else
|
651 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
652 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_CBA_TS1"
|
653 jim.wunderlich 1.39
654 endif
655
|
656 jim.wunderlich 1.61 ############################################################################
657 #
658 # Create_SSL_Certificate
659 #
660 # create a certificate that can be used for certification testing.
661 # It is currently used by the following tests:
662 # -run_INDSSL_TS1
663 #
664 Create_SSL_Certificate_ignore: FORCE
665 -$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile Create_SSL_Certificate
666
667 Create_SSL_Certificate: FORCE
668 ifdef PEGASUS_HAS_SSL
669 ifdef PEGASUS_TEST_USER_DEFINED
670 $(ECHO) "Creating SSL certificate for test"
|
671 sushma.fernandes 1.71 cimtrust -a -U $(PEGASUS_TEST_USER_ID) -f $(PEGASUS_HOME)/server.pem -Ts
|
672 jim.wunderlich 1.61 endif
673 else
674 $(ECHO) "PEGASUS_HAS_SSL not defined - Not Creating SSL certificate for test"
675 endif
676
|
677 kumpf 1.46 ###############################################################################
678 ## G11N Test Suite 1: Globalization Tests
679 ##
680 ## Configuration Options: forceProviderProcesses=false
681 ##
682 ###############################################################################
683 G11N_TS1_CONFIG_OPTIONS = forceProviderProcesses=false
684 G11N_TS1_TEST_CMDS = \
685 $(MAKE) --directory $(PEGASUS_ROOT)/src/Clients/g11ntest \
686 -f Makefile g11ntest
687
688 run_G11N_TS1:
689 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
690 CIMSERVER_CONFIG_OPTIONS="$(G11N_TS1_CONFIG_OPTIONS)" \
691 TESTSUITE_CMDS="$(G11N_TS1_TEST_CMDS)"
|
692 j.alex 1.66
693 ###############################################################################
694 ## Stress Test Suite 1: Default Stress Tests
695 ##
696 ## Configuration Options: (none)
697 ##
698 ###############################################################################
699 STRESS_TS1_CONFIG_OPTIONS =
700 STRESS_TS1_TEST_CMDS = \
701 TestStressTestController
702
703 run_STRESS_TS1:
704 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
705 CIMSERVER_CONFIG_OPTIONS="$(STRESS_TS1_CONFIG_OPTIONS)" \
706 TESTSUITE_CMDS="$(STRESS_TS1_TEST_CMDS)"
|
707 kumpf 1.46 ###############################################################################
708
|
709 denise.eckstein 1.73 ###############################################################################
710 ## SDK Test Suite 1: SDK Tests
711 ##
712 ## Configuration Options: (none)
713 ##
714 ###############################################################################
715 SDK_TS1_CONFIG_OPTIONS =
716 SDK_TS1_TEST_CMDS = \
717 $(MAKE) --directory $(PEGASUS_ROOT)/src/SDK/samples \
718 -f Makefile testSDK
719
720 ifeq ($(PEGASUS_TEST_SDK),true)
721 run_SDK_TS1: FORCE
722 $(MAKE) --directory=$(PEGASUS_ROOT)/mak \
723 -f $(PEGASUS_ROOT)/mak/SDKMakefile stageINCLUDE \
724 PEGASUS_STAGING_DIR=$(PEGASUS_HOME) \
725 PEGASUS_INCLUDE_DIR=/include
726 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples \
727 -f Makefile clean
728 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples \
729 -f Makefile PEGASUS_INCLUDE_DIR=$(PEGASUS_HOME)/include
730 denise.eckstein 1.73 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
731 CIMSERVER_CONFIG_OPTIONS="$(SDK_TS1_CONFIG_OPTIONS)" \
732 TESTSUITE_CMDS="$(SDK_TS1_TEST_CMDS)"
733 else
734 run_SDK_TS1: FORCE
735 @ $(ECHO) "+++++ PEGASUS_TEST_SDK is not true: Skipping run_SDK_TS1"
736 endif
737 ###############################################################################
|
738 jim.wunderlich 1.39
|
739 nag.boranna 1.27 ###############################################################################
|
740 carolann.graves 1.75 ## Export Client SSL Test Suite 1:
741 ##
742 ## Configuration Options: enableHttpsConnection=true
743 ##
744 ###############################################################################
745 ExportClientSSL_TS1_CONFIG_OPTIONS = enableHttpsConnection=true
746 ExportClientSSL_TS1_TEST_CMDS = \
747 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/ExportClient/tests/ExportClient@@-f@@Makefile@@runExportClientSSL_TS1
748
749 ifdef PEGASUS_HAS_SSL
750 run_ExportClientSSL_TS1:
751 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
752 CIMSERVER_CONFIG_OPTIONS="$(ExportClientSSL_TS1_CONFIG_OPTIONS)" \
753 TESTSUITE_CMDS="$(ExportClientSSL_TS1_TEST_CMDS)"
754 else
755 run_ExportClientSSL_TS1: FORCE
756 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_ExportClientSSL_TS1"
757 endif
758
759 ###############################################################################
|
760 nag.boranna 1.27
|
761 jim.wunderlich 1.34
762
|
763 w.otsuka 1.76 ###############################################################################
|
764 dave.sudlik 1.88 ## idleConnectionTimeout Test Suite 1: uses ChunkingStressProvider Tests
765 ##
|
766 dave.sudlik 1.89 ## Configuration Options: idleConnectionTime=55
|
767 dave.sudlik 1.88 ##
768 ###############################################################################
|
769 dave.sudlik 1.89 IDLE_CONNECTION_TIMEOUT_1_CONFIG_OPTIONS = idleConnectionTimeout=55
|
770 dave.sudlik 1.88 IDLE_CONNECTION_TIMEOUT_1_TEST_CMDS = \
771 $(MAKE)@@--directory \
772 $(PEGASUS_ROOT)/src/Providers/TestProviders/ChunkingStressProvider/testclient \
773 -f@@Makefile@@poststarttests
774 run_idleConnectionTimeout1: FORCE
775 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
776 CIMSERVER_CONFIG_OPTIONS="$(IDLE_CONNECTION_TIMEOUT_1_CONFIG_OPTIONS)" \
777 TESTSUITE_CMDS="$(IDLE_CONNECTION_TIMEOUT_1_TEST_CMDS)"
778 ###############################################################################
779
780
781 ###############################################################################
782 ## idleConnectionTimeout Test Suite 2: uses IdleConnectionTimeout client test
783 ##
784 ## Configuration Options: idleConnectionTime=6
785 ##
786 ###############################################################################
787 IDLE_CONNECTION_TIMEOUT_2_CONFIG_OPTIONS = idleConnectionTimeout=6
788 IDLE_CONNECTION_TIMEOUT_2_TEST_CMDS = \
789 $(MAKE)@@--directory \
790 $(PEGASUS_ROOT)/src/Pegasus/Client/tests/IdleConnectionTimeout/ \
791 dave.sudlik 1.88 -f@@Makefile@@timeoutTest@@IDLETIME=10
792 run_idleConnectionTimeout2: FORCE
793 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
794 CIMSERVER_CONFIG_OPTIONS="$(IDLE_CONNECTION_TIMEOUT_2_CONFIG_OPTIONS)" \
795 TESTSUITE_CMDS="$(IDLE_CONNECTION_TIMEOUT_2_TEST_CMDS)"
796 ###############################################################################
797
798
799 ###############################################################################
|
800 w.otsuka 1.76 ## cimsub CLI Test Suite 1: PG_InterOp Tests
801 ##
802 ## Configuration Options: (none)
803 ##
804 ###############################################################################
805 CIMSUB_INTEROP_CONFIG_OPTIONS =
806 CIMSUB_INTEROP_TEST_CMDS = \
807 $(MAKE) --directory \
808 $(PEGASUS_ROOT)/src/Clients/cimsub/tests/testscriptInterOp \
809 -f Makefile cimsubTest_InterOp
810 run_Cimsub_InterOp: FORCE
811 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
812 CIMSERVER_CONFIG_OPTIONS="$(CIMSUB_INTEROP_CONFIG_OPTIONS)" \
813 TESTSUITE_CMDS="$(CIMSUB_INTEROP_TEST_CMDS)"
814 ###############################################################################
815
816 ###############################################################################
|
817 s.kodali 1.85 ## CMPI subscription activation Test Suite 1:
818 ##
819 ## Configuration Options: (none)
820 ##
821 ###############################################################################
822 CMPI_SUB_TEST_CONFIG_OPTIONS=
823 CMPI_SUBa_TEST_CMDS = \
824 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider setup WQL
825 CMPI_SUBb_TEST_CMDS = \
826 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider getSubscriptionCount
827 CMPI_SUBc_TEST_CMDS = \
828 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider cleanup
829 run_Cmpi_Sub: FORCE
830 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
831 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
832 TESTSUITE_CMDS="$(CMPI_SUBa_TEST_CMDS)"
833 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
834 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
835 TESTSUITE_CMDS="$(CMPI_SUBb_TEST_CMDS)"
836 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
837 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
838 s.kodali 1.85 TESTSUITE_CMDS="$(CMPI_SUBc_TEST_CMDS)"
839
840 ##############################################################################
|
841 w.otsuka 1.76
842
|
843 jim.wunderlich 1.34 ##############################################################################
844 ##
845 ## TestXMLRepository rule is used to run the poststarttests suite on
846 ## the XML Repository built using cimmofl
847 ##
848 ## TestXMLRepositoryServer rule is used to run the poststarttests suite on
849 ## the XML Repository built using cimmof
850 ##
851 ## TestXMLCmpRepository rule is used to run the poststarttest suite on
852 ## the XML Compressed Repository built using cimmofl
853 ##
854
855 ############################
856 ##
857 ## TestXMLRepository
858 ##
859
860 TestXMLRepository: TestXMLClean TestXMLBuildRepo TestXMLRepo
861 @ $(ECHO) TestXMLRepository +++++ passed all test
862
863 ############################
864 jim.wunderlich 1.34 ##
865 ## TestXMLRepositoryServer
866 ##
867 TestXMLRepositoryServer: TestXMLClean TestXMLBuildRepoServ TestXMLRepo
868 @ $(ECHO) TestXMLRepositoryServer +++++ passed all test
869
870 ############################
871 ##
872 ## TestXMLCmpRepository - run poststarttest on Compressed BIN Repository
873 ##
874 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY
875 TestXMLCmpRepository: FORCE
876 @ $(ECHO) TestXMLCmpRepository +++++ Repository compressed by default - nothing more to test.
877 @ $(ECHO) TestXMLCmpRepository +++++ passed all test
878 else
879
880 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST
881
882 TestXMLCmpRepository: TestXMLClean TestCmpBuild TestXMLBuildRepo TestXMLRepo TestRegBuild
883 @ $(ECHO) TestXMLCmpRepository +++++ passed all test
884 else
885 jim.wunderlich 1.34 TestXMLCmpRepository: FORCE
886 @ $(ECHO) TestXMLCmpRepository +++++ Not tested
887 @ $(ECHO) TestXMLCmpRepository +++++ refer to readme.compressed_repository
888 @ $(ECHO) TestXMLCmpRepository +++++ to enable: set PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST=true
889 endif
890 endif
891
892 ###########################
893 ##
894 ## TestXMLClean
895 ##
896 TestXMLClean: FORCE
897 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
898 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryclean REPOSITORY_NAME=repository_xml
899
900
901 ###########################
902 ##
903 ## TestXMLStartServer
904 ##
905 TestXMLStartServer: FORCE
906 jim.wunderlich 1.34 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile install_run
907 - $(MKDIRHIER) $(PEGASUS_HOME)/repository_xml
908 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="repositoryDir=$(PEGASUS_HOME)/repository_xml"
909 $(SLEEP) 5
910
911 ####
912 #### The following caused the cimserver to fail on startup
913 ####
914 #### $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableBinRepository=false repositoryDir=$(PEGASUS_HOME)/repository_xml"
915
916 ###########################
917 ##
918 ## TestXMLBuildRepo
919 ##
920 TestXMLBuildRepo: FORCE
921 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
922 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
923
924
925 ###########################
926 ##
927 jim.wunderlich 1.34 ## TestXMLBuildRepoServ
928 ##
929 TestXMLBuildRepoServ: TestXMLStartServer
930 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
931 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
932 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
933
934
935 ###########################
936 ##
937 ## TestXMLRepo
938 ##
|
939 jim.wunderlich 1.40 TestXMLRepo: servertestsclean
|
940 jim.wunderlich 1.35 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestXMLStartServer
|
941 jim.wunderlich 1.34 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
942 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
943
944
945
946
947
948
|
949 jim.wunderlich 1.29 ##############################################################################
950 ##
|
951 jim.wunderlich 1.31 ## TestBinRepository rule is used to run the poststarttests suite on
|
952 jim.wunderlich 1.33 ## the Binary Repository built using cimmofl
|
953 jim.wunderlich 1.29 ##
|
954 jim.wunderlich 1.31 ## TestBinRepositoryServer rule is used to run the poststarttests suite on
|
955 jim.wunderlich 1.33 ## the Binary Repository built using cimmof
956 ##
957 ## TestBinCmpRepository rule is used to run the poststarttest suite on
958 ## the Binry Compressed Repository built using cimmofl
|
959 jim.wunderlich 1.29 ##
|
960 jim.wunderlich 1.31
961 ############################
|
962 jim.wunderlich 1.29 ##
|
963 jim.wunderlich 1.31 ## TestBinRepository
|
964 jim.wunderlich 1.29 ##
|
965 jim.wunderlich 1.33 ### bug 3011 disabled Binary Repository testing on LINUX_IA64 to allow
966 ### the nightly tests to run
967
|
968 jim.wunderlich 1.31 TestBinRepository: TestBinClean TestBinBuildRepo TestBinRepo
|
969 jim.wunderlich 1.33 @ $(ECHO) TestBinRepository +++++ passed all test
|
970 jim.wunderlich 1.36
|
971 jim.wunderlich 1.29
|
972 jim.wunderlich 1.31 ############################
973 ##
974 ## TestBinRepositoryServer
975 ##
976 TestBinRepositoryServer: TestBinClean TestBinBuildRepoServ TestBinRepo
|
977 jim.wunderlich 1.33 @ $(ECHO) TestBinRepositoryServer +++++ passed all test
978
979 ############################
980 ##
981 ## TestBinCmpRepository - run poststarttest on Compressed BIN Repository
982 ##
983 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY
|
984 jim.wunderlich 1.34 TestBinCmpRepository: FORCE
|
985 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ Repository compressed by default - nothing more to test.
986 @ $(ECHO) TestBinCmpRepository +++++ passed all test
987 else
988
989 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST
990
|
991 jim.wunderlich 1.34 TestBinCmpRepository: TestBinClean TestCmpBuild TestBinBuildRepo TestBinRepo TestRegBuild
|
992 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ passed all test
993 else
|
994 jim.wunderlich 1.34 TestBinCmpRepository: FORCE
|
995 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ Not tested
996 @ $(ECHO) TestBinCmpRepository +++++ refer to readme.compressed_repository
997 @ $(ECHO) TestBinCmpRepository +++++ to enable: set PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST=true
998 endif
999 endif
1000
1001
|
1002 jim.wunderlich 1.31 ###########################
1003 ##
1004 ## TestBinClean
1005 ##
|
1006 jim.wunderlich 1.34 TestBinClean: FORCE
|
1007 jim.wunderlich 1.31 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1008 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryclean REPOSITORY_NAME=repository_bin
|
1009 jim.wunderlich 1.29
|
1010 jim.wunderlich 1.31
1011 ###########################
|
1012 jim.wunderlich 1.29 ##
|
1013 jim.wunderlich 1.31 ## TestBinStartServer
|
1014 jim.wunderlich 1.29 ##
|
1015 jim.wunderlich 1.34 TestBinStartServer: FORCE
|
1016 jim.wunderlich 1.30 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile install_run
|
1017 jim.wunderlich 1.31 - $(MKDIRHIER) $(PEGASUS_HOME)/repository_bin
1018 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableBinaryRepository=true repositoryDir=$(PEGASUS_HOME)/repository_bin"
|
1019 jim.wunderlich 1.29 $(SLEEP) 5
|
1020 jim.wunderlich 1.31
1021 ###########################
|
1022 jim.wunderlich 1.29 ##
|
1023 jim.wunderlich 1.31 ## TestBinBuildRepo
|
1024 jim.wunderlich 1.29 ##
|
1025 jim.wunderlich 1.34 TestBinBuildRepo: FORCE
|
1026 jim.wunderlich 1.29 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
1027 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
|
1028 jim.wunderlich 1.31
1029
1030 ###########################
1031 ##
1032 ## TestBinBuildRepoServ
1033 ##
1034 TestBinBuildRepoServ: TestBinStartServer
1035 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
1036 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
1037 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1038
1039
1040 ###########################
1041 ##
1042 ## TestBinRepo
1043 ##
|
1044 jim.wunderlich 1.40 TestBinRepo: servertestsclean
|
1045 jim.wunderlich 1.35 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestBinStartServer
|
1046 jim.wunderlich 1.29 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
|
1047 jim.wunderlich 1.31 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1048 jim.wunderlich 1.29
1049
1050
|
1051 jim.wunderlich 1.34
1052 ############################
1053 ##
1054 ## TestCmpBuild - used to compile the repository for compression
1055 ##
1056 TestCmpBuild: FORCE
1057 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository clean
1058 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository depend PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1
1059 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1
1060
1061
1062 ############################
1063 ##
1064 ## TestRegBuild - used to compile the repository for no compression
1065 ##
1066 TestRegBuild: FORCE
1067 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository clean
1068 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository depend
1069 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository
1070
1071
|
1072 nag.boranna 1.27 ###############################################################################
|
1073 kumpf 1.1 ##
1074 ## Trace Configuration
1075 ##
|
1076 jim.wunderlich 1.43 ## Options: see usagetrace rule
1077 ##
1078 ###############################################################################
1079
1080 usagetrace: FORCE
1081 $(USAGE)
|
1082 jim.wunderlich 1.60 $(USAGE)"TestMakefile Trace Commands: "
1083 $(USAGE)" The cimserver must be running when using W=c which is the default for W"
|
1084 jim.wunderlich 1.43 $(USAGE)
|
1085 jim.wunderlich 1.60 $(USAGE)" traceon W=[current/planned(c,p): Enables all tracing."
1086 $(USAGE)" traceoff W=[current/planned(c,p): Disables all tracing."
1087 $(USAGE)" tracesettings: Displays all trace settings."
1088 $(USAGE)" tracecomp: Displays a trace componenets list."
1089 $(USAGE)" traceon-CL C=[comp] L=[level(1,2,3,4)] W=[current/planned(c,p): "
1090 $(USAGE)" Enables tracing on component C at trace level L."
1091 $(USAGE)
1092 $(USAGE)" W defaults to c in the above commands where W can be specified"
|
1093 jim.wunderlich 1.43 $(USAGE)
|
1094 jim.wunderlich 1.60 $(USAGE)" Usage examples:"
1095 $(USAGE)" traceon turns on trace in current server config"
1096 $(USAGE)" traceon W=c turns on trace in current server config"
1097 $(USAGE)" traceon W=p turns on trace in planned server config"
1098 $(USAGE)" traceoff turns on trace in current server config"
1099 $(USAGE)" traceoff W=c turns on trace in current server config"
1100 $(USAGE)" traceoff W=p turns on trace in planned server config"
1101 $(USAGE)
1102 $(USAGE)" traceon-CL C=DiscardedData L=3 W=c"
1103 $(USAGE)" Turns on trace for DiscardedData at level 3 in current server config"
1104 $(USAGE)" traceon-CL C=DiscardedData L=3 W=p"
1105 $(USAGE)" Turns on trace for DiscardedData at level 3 in planned server config"
|
1106 jim.wunderlich 1.43 $(USAGE)
1107 $(USAGE)
1108
1109 traceon: FORCE
|
1110 jim.wunderlich 1.60 @ cimconfig -s traceComponents=ALL -$W
1111 @ cimconfig -s traceLevel=3 -$W
1112 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
1113
|
1114 jim.wunderlich 1.43
1115 traceoff: FORCE
|
1116 jim.wunderlich 1.60 @ cimconfig -s traceComponents= -$W
1117 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
|
1118 jim.wunderlich 1.43
1119
1120 tracesettings: FORCE
1121 @ $(ECHO) " "
|
1122 jim.wunderlich 1.60 cimconfig -g traceComponents -c -p
|
1123 jim.wunderlich 1.43 @ $(ECHO) " "
|
1124 jim.wunderlich 1.60 cimconfig -g traceLevel -c -p
|
1125 jim.wunderlich 1.43 @ $(ECHO) " "
|
1126 jim.wunderlich 1.60 cimconfig -g traceFilePath -c -p
|
1127 jim.wunderlich 1.43 @ $(ECHO) " "
1128
1129 traceon-CL: FORCE
|
1130 jim.wunderlich 1.60 @ cimconfig -s traceComponents=$C -$W
1131 @ cimconfig -s traceLevel=$L -$W
1132 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
|
1133 jim.wunderlich 1.43
1134 tracecomp: FORCE
1135 $(USAGE)
1136 $(USAGE)"Trace component list:"
1137 $(USAGE)
1138 $(USAGE)"Channel"
1139 $(USAGE)"XmlParser"
1140 $(USAGE)"XmlWriter"
1141 $(USAGE)"XmlReader"
1142 $(USAGE)"XmlIO"
1143 $(USAGE)"Http"
1144 $(USAGE)"CimData"
1145 $(USAGE)"ProvManager"
1146 $(USAGE)"Repository"
1147 $(USAGE)"Dispatcher"
1148 $(USAGE)"OsAbstraction"
1149 $(USAGE)"Config"
1150 $(USAGE)"IndDelivery"
1151 $(USAGE)"IndHandler"
1152 $(USAGE)"Authentication"
1153 $(USAGE)"Authorization"
1154 jim.wunderlich 1.43 $(USAGE)"UserManager"
1155 $(USAGE)"SubscriptionService"
1156 $(USAGE)"Registration"
1157 $(USAGE)"Shutdown"
1158 $(USAGE)"Server"
1159 $(USAGE)"IndicationService"
1160 $(USAGE)"IndicationServiceInternal"
1161 $(USAGE)"ConfigurationManager"
1162 $(USAGE)"MessageQueueService"
1163 $(USAGE)"ProviderManager"
1164 $(USAGE)"ObjectResolution"
1165 $(USAGE)"WQL"
1166 $(USAGE)"CQL"
1167 $(USAGE)"Thread"
1168 $(USAGE)"MetaDispatcher"
1169 $(USAGE)"IPC"
1170 $(USAGE)"IndicationHandlerService"
1171 $(USAGE)"CIMExportRequestDispatcher"
1172 $(USAGE)"Memory"
1173 $(USAGE)"SSL"
1174 $(USAGE)"ControlProvider"
1175 jim.wunderlich 1.43 $(USAGE)"AsyncOpNode"
1176 $(USAGE)"CIMOMHandle"
1177 $(USAGE)"L10N"
1178 $(USAGE)"ExportClient"
1179 $(USAGE)"Listener"
1180 $(USAGE)"DiscardedData"
1181 $(USAGE)"ProviderAgent"
1182 $(USAGE)
1183
1184 ###############################################################################
1185 ##
1186 ## Trace Configuration - Old rules being deprecated
1187 ##
|
1188 kumpf 1.1 ## Options:
1189 ## XMLTraceOn: Enables XML request and response tracing.
1190 ## ProviderLoadTraceOn: Enables Provider load tracing.
1191 ## XML+ProviderLoadTraceOn: Enables both XML request/response and Provider
1192 ## load tracing.
1193 ## AllTraceOn: Enables all tracing.
1194 ## AllTraceOff: Disables all tracing.
1195 ## list: Lists trace settings.
1196 ##
1197 ###############################################################################
1198
1199 XMLTraceOn:
1200 cimconfig -s traceComponents=XmlIO -c
1201 cimconfig -s traceLevel=3 -c
1202 cimconfig -g traceComponents
1203 cimconfig -g traceLevel
1204
1205 ProviderLoadTraceOn:
1206 cimconfig -s traceComponents=ProvManager,OsAbstraction
1207 cimconfig -s traceLevel=3 -c
1208 cimconfig -g traceComponents
1209 kumpf 1.1 cimconfig -g traceLevel
1210
1211 XML+ProviderLoadTraceOn:
1212 cimconfig -s traceComponents=XmlIO,ProvManager,OsAbstraction
1213 cimconfig -s traceLevel=3 -c
1214 cimconfig -g traceComponents
1215 cimconfig -g traceLevel
1216
|
1217 jim.wunderlich 1.43 AllTraceOn: traceon
1218
1219 AllTraceOff: traceoff
|
1220 kumpf 1.1
|
1221 jim.wunderlich 1.43 list: tracesettings
|
1222 kumpf 1.1
|
1223 jim.wunderlich 1.55 #########################################################################
1224 # standardtests
1225 #
1226 # More testing options...
1227 #
1228 # The standard test seem to contain additional test that may not be able
1229 # to run on all platforms so they have been grouped here for now rather than
1230 # being included in the serversuite rule.
1231 #
1232 # The test are:
1233 # TestCimmof
1234 # TestNoSecurity
1235 # TestLocalSecurity
1236 # TestRemoteSecurity
1237 # TestAuthorization
1238 #
1239 # NOTE: The TestsNoSecurity test is comprised of DisableSecurity and
1240 # TestNoSecurity.
1241 #
1242 # NOTE: The TestNoSecurity step runs the servertests which builds the
1243 # the repository that is then left in place for the remaining tests.
1244 jim.wunderlich 1.55 # The cimof test must be before the TestNosecurity step as it removes
1245 # the repository builds a new one with cimmofl and another one with
1246 # cimmof and then compares them.
1247 #
1248 # NOTE: The Authentication test is comprised of EnableAuthentication,
1249 # TestLocalSecurity and TestRemoteSecurity.
1250 #
1251 # NOTE: The Authorization test is comprised of EnableAuthorization and
1252 # TestAuthorization.
1253 #
1254 # NOTE: The EnableAuthentication and EnableAuthorization steps require
1255 # root access. Pegasus doesn't currently have the infrastructure
1256 # in place to run the server as root and run the test as non-root.
1257 # Rather than run everything, server, tests, providers, clients etc.
1258 # as root many testers prefer to run the tests as non-root. Setting
1259 # PEGASUS_DISABLE_PRIVILEGED_TESTS in the environment helps to
1260 # facilitate that.
1261 #
|
1262 kumpf 1.1
|
1263 jim.wunderlich 1.40 standardtests: FORCE
|
1264 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i DisableSecurity
1265 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestCimmof
|
1266 kumpf 1.94 # $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestNoSecurity
1267 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository testrepository
|
1268 jim.wunderlich 1.55 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
1269 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile EnableAuthentication
1270 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestLocalSecurity
1271 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestRemoteSecurity
1272 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile EnableAuthorization
1273 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestAuthorization
|
1274 jim.wunderlich 1.53 else
|
1275 jim.wunderlich 1.55 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping EnableAuthentication, TestLocalSecurity, and TestRemoteSecurity "
|
1276 jim.wunderlich 1.53 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping EnableAuthorization and TestAuthorization "
1277 endif
|
1278 kumpf 1.94 # Reset the security options to the defaults
1279 cimconfig -u enableNamespaceAuthorization -p
1280 cimconfig -u enableAuthentication -p
|
1281 kumpf 1.93 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1282 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile standardtests complete"
|
1283 kumpf 1.1
1284 TestNoSecurity:
|
1285 jim.wunderlich 1.56 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile servertests
|
1286 kumpf 1.24 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
|
1287 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1288 kumpf 1.1
1289 TestLocalSecurity:
|
1290 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1291 kumpf 1.1 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile poststarttests HOSTNAME= PORT= USER= PASSWORD= SECURITY_ENABLED=true
1292
1293 TestRemoteSecurity:
|
1294 jim.wunderlich 1.59 TestClient -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS) $(system):5988
1295 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/static -f Makefile poststarttests HOSTNAME=-h$(system) USER=-u$(PEGASUS_TEST_USER_ID) PASSWORD=-w$(PEGASUS_TEST_USER_PASS) SECURITY_ENABLED=true
|
1296 kumpf 1.1
1297 TestAuthorization:
|
1298 jim.wunderlich 1.59 TestPegClientDeleteNamespace -a -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS)
|
1299 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1300 jim.wunderlich 1.59 TestClient -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS) $(system):5988
1301 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/static -f Makefile poststarttests HOSTNAME=-h$(system) USER=-u$(PEGASUS_TEST_USER_ID) PASSWORD=-w$(PEGASUS_TEST_USER_PASS) SECURITY_ENABLED=true
|
1302 kumpf 1.1
1303 TestSubscriptions:
|
1304 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile DisableSecurity
|
1305 kumpf 1.1 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
1306 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository
|
1307 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
|
1308 david.dillard 1.15 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/cimv2/Subscription -f Makefile poststarttests
|
1309 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
|
1310 kumpf 1.1
1311 TestCimmof:
|
1312 kumpf 1.95 # Build the repository with cimmofl and cimmof and compare them.
1313 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1314 -@$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-save
1315 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmofl
1316 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmof
1317 @$(ECHO) $(CIM_SCHEMA_DIR)
1318 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
1319 @$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-cimmofl
1320 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
1321 @$(ECHO) $(CIM_SCHEMA_DIR)
1322 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer
1323 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
1324 @$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-cimmof
1325 -@$(MOVE) $(REPOSITORY_DIR)/repository-save $(REPOSITORY_DIR)/repository
1326 TestCompareRepositories $(REPOSITORY_DIR)/repository-cimmofl $(REPOSITORY_DIR)/repository-cimmof
1327 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmofl
1328 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmof
|
1329 kumpf 1.1
1330 RunTestClientLocal:
1331 TestClient -local
1332
1333 DisableSecurity:
|
1334 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1335 kumpf 1.1 cimconfig -s enableAuthentication=false -p
1336 cimconfig -s enableNamespaceAuthorization=false -p
1337
|
1338 jim.wunderlich 1.61 EnableUsers:
1339 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1340 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1341 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
1342
|
1343 kumpf 1.1 EnableAuthentication:
|
1344 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1345 kumpf 1.1 cimconfig -s enableAuthentication=true -p
|
1346 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1347 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
|
1348 kumpf 1.1
1349 EnableAuthorization:
|
1350 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1351 kumpf 1.10 cimconfig -s enableNamespaceAuthorization=true -p
|
1352 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1353 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i ConfigureAuthorizations
|
1354 kumpf 1.1
1355 EnableSSL:
|
1356 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1357 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithSSL
|
1358 kumpf 1.1
|
1359 jim.wunderlich 1.61 #
1360 # ConfigureUsers
1361 #
1362 # The server must be running prior to invoking this rule
1363 #
|
1364 kumpf 1.1 ConfigureUsers:
1365 ifndef PEGASUS_PAM_AUTHENTICATION
|
1366 jim.wunderlich 1.62 -cimuser -l
|
1367 jim.wunderlich 1.61 -cimuser -a -u $(PEGASUS_TEST_USER_ID) -w $(PEGASUS_TEST_USER_PASS)
|
1368 kumpf 1.1 endif
1369
|
1370 jim.wunderlich 1.61 #
1371 # ConfigureAuthorizations rule
1372 #
1373 # The server must be running prior to invoking this rule
1374 #
|
1375 kumpf 1.1 ConfigureAuthorizations:
|
1376 jim.wunderlich 1.59 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/cimv2 -R -W
1377 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/cimv2 -R -W
1378 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/PG_Internal -R -W
1379 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/PG_InterOp -R -W
1380 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/benchmark -R -W
1381 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/sampleprovider -R -W
1382 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/static -R -W
1383 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/SampleProvider -R -W
1384 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root -R -W
|
1385 sushma.fernandes 1.80 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/MCCAtest/A -R -W
1386 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/MCCAtest/B -R -W
|
1387 kumpf 1.65 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/TestProvider -R -W
|
1388 jim.wunderlich 1.59 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1 -R -W
1389 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test2 -R -W
1390 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test3 -R -W
1391 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test4 -R -W
1392 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test5 -R -W
1393 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test6 -R -W
1394 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2 -R -W
1395 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3 -R -W
1396 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4 -R -W
1397 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4/test5 -R -W
1398 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4/test5/test6 -R -W
|
1399 kumpf 1.82 ifeq ($(PEGASUS_ENABLE_PRIVILEGE_SEPARATION),true)
|
1400 kumpf 1.83 cimauth -a -u $(PEGASUS_CIMSERVERMAIN_USER) -n root/cimv2 -R -W
|
1401 kumpf 1.82 endif
|
1402 kumpf 1.1
|
1403 jim.wunderlich 1.41 startcimWithoutSSL: FORCE
1404 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
|
1405 kumpf 1.19 $(SLEEP) 5
|
1406 kumpf 1.1
|
1407 jim.wunderlich 1.41 startcimWithSSL: FORCE
1408 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableHttpConnection=false enableHttpsConnection=true"
|
1409 kumpf 1.19 $(SLEEP) 5
|
1410 j.alex 1.66
|
1411 denise.eckstein 1.97 ###############################################################################
1412 ##
1413 ## check_for_cores - used to search for core files in the build environment.
1414 ##
1415 ## This option will search (1) each source directory, (2) the PEGASUS_CORE_DIR
1416 ## if it is defined and (3) the PEGASUS_TMP directory.
1417 ##
1418 ###############################################################################
1419 CORE_FILE_LIST = $(PEGASUS_HOME)/CoreFileList
1420
1421 check_core_search_results:
1422 ifneq ($(wildcard $(CORE_FILE_LIST)), )
1423 @$(ECHO) "*** One or more core files found. ***"
1424 @$(CAT) $(CORE_FILE_LIST)
1425 @exit 1
1426 endif
1427
1428 ifdef PEGASUS_CORE_DIR
1429 CORE_FILES_IN_CORE_DIR = \
1430 $(wildcard $(PEGASUS_CORE_DIR)/$(PLATFORM_CORE_PATTERN))
1431 endif
1432 denise.eckstein 1.97 ifdef PEGASUS_TMP
1433 CORE_FILES_IN_TMP_DIR = \
1434 $(wildcard $(PEGASUS_TMP)/$(PLATFORM_CORE_PATTERN))
1435 endif
1436
1437 generate_core_file_list:
1438 @$(RM) $(CORE_FILE_LIST)
1439 @$(MAKE) -s directory=$(PEGASUS_ROOT) general OPTION=CORE_SEARCH \
1440 CORE_FILE_LIST=$(CORE_FILE_LIST)
1441 ifdef PEGASUS_CORE_DIR
1442 ifneq ($(CORE_FILES_IN_CORE_DIR), )
1443 @$(ECHO) $(CORE_FILES_IN_CORE_DIR) >> $(CORE_FILE_LIST)
1444 endif
1445 endif
1446 ifdef PEGASUS_TMP
1447 ifneq ($(CORE_FILES_IN_TMP_DIR), )
1448 @$(ECHO) $(CORE_FILES_IN_TMP_DIR) >> $(CORE_FILE_LIST)
1449 endif
1450 endif
1451
1452 check_for_cores:
1453 denise.eckstein 1.97 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
1454 generate_core_file_list
1455 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
1456 check_core_search_results
|
Return to
TestMakefile
CVS log
Up to [Pegasus] / pegasus