1 martin 1.99 #//%LICENSE////////////////////////////////////////////////////////////////
|
2 martin 1.100 #//
|
3 martin 1.99 #// Licensed to The Open Group (TOG) under one or more contributor license
4 #// agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
5 #// this work for additional information regarding copyright ownership.
6 #// Each contributor licenses this file to you under the OpenPegasus Open
7 #// Source License; you may not use this file except in compliance with the
8 #// License.
|
9 martin 1.100 #//
|
10 martin 1.99 #// Permission is hereby granted, free of charge, to any person obtaining a
11 #// copy of this software and associated documentation files (the "Software"),
12 #// to deal in the Software without restriction, including without limitation
13 #// the rights to use, copy, modify, merge, publish, distribute, sublicense,
14 #// and/or sell copies of the Software, and to permit persons to whom the
15 #// Software is furnished to do so, subject to the following conditions:
|
16 martin 1.100 #//
|
17 martin 1.99 #// The above copyright notice and this permission notice shall be included
18 #// in all copies or substantial portions of the Software.
|
19 martin 1.100 #//
|
20 martin 1.99 #// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
21 martin 1.100 #// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
22 martin 1.99 #// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
23 #// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
24 #// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 #// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 #// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
27 martin 1.100 #//
|
28 martin 1.99 #//////////////////////////////////////////////////////////////////////////
|
29 kumpf 1.1 ###############################################################################
30 ##
31 ## Test Makefile for Pegasus CIMOM
32 ##
|
33 jim.wunderlich 1.40 ## see the usage rule for documentation of rules etc.
|
34 jim.wunderlich 1.34 ##
35 ##
|
36 kumpf 1.1 ###############################################################################
37
|
38 david.dillard 1.15 error:
|
39 jim.wunderlich 1.40 @ $(ECHO) "Specify desired makefile option (i.e., unittests, usage )"
|
40 kumpf 1.1
|
41 kumpf 1.23 include $(PEGASUS_ROOT)/mak/config.mak
42 include $(PEGASUS_ROOT)/mak/test.mak
43 include $(PEGASUS_ROOT)/mak/commands.mak
44
45 system = localhost
46
|
47 jim.wunderlich 1.34 .PHONY: FORCE
48
49 FORCE:
50
|
51 jim.wunderlich 1.40 usage: FORCE
52 $(USAGE)
53 $(USAGE)"TestMakefile Primary Targets:"
54 $(USAGE)
55 $(USAGE)"The following are all standalone tests. They stop and start the server,"
56 $(USAGE)"and build repositories as needed."
57 $(USAGE)
58 $(USAGE)"alltests - Execute unittests and servertests"
59 $(USAGE)"unittests - Execute the unit functional tests - no repository"
60 $(USAGE)" or active server is required"
61 $(USAGE)"servertests - Execute a basic server test suites (No security, No SSL)"
62 $(USAGE)"standardtests - Execute an extended server test suites "
63 $(USAGE)" using multiple options."
|
64 jim.wunderlich 1.45 $(USAGE)"perftests - Executes a brief server performance test"
|
65 jim.wunderlich 1.40 $(USAGE)
66 $(USAGE)"usage2 - usage on secondary test targets"
|
67 jim.wunderlich 1.43 $(USAGE)"usagetrace - usage on trace targets"
|
68 j.alex 1.66 $(USAGE)"stresstests - Execute the default stress test suite"
|
69 jim.wunderlich 1.40 $(USAGE)
70
71 usage2: FORCE
72 $(USAGE)
73 $(USAGE)"TestMakefile Secondary Targets:"
74 $(USAGE)
75 $(USAGE)"The following are run as part of the Primary target test suites and may"
76 $(USAGE)"also be invoked as standalone tests."
77 $(USAGE)
78 $(USAGE)"TestXMLRepository - Executes poststarttests on XML repository"
79 $(USAGE)" built with cimmofl."
|
80 kumpf 1.101 $(USAGE)"TestXMLRepositoryServer - Executes poststarttests on XML repository"
|
81 jim.wunderlich 1.40 $(USAGE)" built with cimmof."
82 $(USAGE)"TestXMLCmpRepository - Executes poststarttests on XML compressed"
83 $(USAGE)" repository built with cimmofl."
84 $(USAGE)"TestBinRepository - Executes poststarttests on binary repository "
85 $(USAGE)" built with cimmofl."
86 $(USAGE)"TestBinRepositoryServer - Executes poststarttests on binary repository"
87 $(USAGE)" built with cimmof."
88 $(USAGE)"TestBinCmpRepository - Executes poststarttests on binary compressed"
89 $(USAGE)" repository built with cimmofl."
90 $(USAGE)
91 $(USAGE)"The following require the repository to be pre-built."
92 $(USAGE)
|
93 sushma.fernandes 1.84 $(USAGE)"run_SSL_CBA_TS1 - Executes the Certificate based authentication test suite."
94 $(USAGE)"run_SSL_IPV4_TS1 - Executes the IPv4 SSL connection test suite."
95 $(USAGE)"run_SSL_IPV6_TS1 - Executes the IPv6 SSL connection test suite."
|
96 jim.wunderlich 1.40 $(USAGE)"run_OOP_TS1 - Executes the Out Of Process Provider tests"
|
97 kumpf 1.46 $(USAGE)"run_G11N_TS1 - Executes the Globalization tests"
|
98 jim.wunderlich 1.40 $(USAGE)
99 $(USAGE)"The following require the repository to be pre-built and the server to be started."
100 $(USAGE)
101 $(USAGE)"serversuite - the collection of test run by the servertests rule"
|
102 j.alex 1.66 $(USAGE)"run_STRESS_TS1 - Executes the stresstests"
|
103 dave.sudlik 1.78 $(USAGE)"slptests - Executes the slptests"
|
104 kumpf 1.101 $(USAGE)"run_Cmpi_Sub - Executes the CMPI subscription tests"
|
105 jim.wunderlich 1.40 $(USAGE)
|
106 rohini.deshpande 1.112 $(USAGE)"The following requires wseventsink to be installed on the server and is not run"
107 $(USAGE)"as part of Primary target tests suites."
108 $(USAGE)"run_WSMAN_TS - Executes the WSMAN indication deliver test"
|
109 jim.wunderlich 1.40
110
111 ##########################################################
112 #
113 # rules that are defined in Makefile
114 #
115 ##########################################################
|
116 kumpf 1.21
|
117 jim.wunderlich 1.39 build: FORCE
118 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile build
|
119 kumpf 1.21
|
120 jim.wunderlich 1.40 world: FORCE
121 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile world
122
123 new: FORCE
124 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile new
125
|
126 jim.wunderlich 1.39 clean: FORCE
|
127 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile clean
128
|
129 jim.wunderlich 1.40 depend: FORCE
130 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile depend
131
|
132 denise.eckstein 1.69 ###############################################################################
133 # mak/certificate_test.mak implements three key functions for
134 # testing Certificate-Based Authentication (CBA).
|
135 kumpf 1.101 #
|
136 denise.eckstein 1.69 # setupCBATestCertificates is used to create a set of test certificates
137 # make -f TestMakefile setupCBATestCertificates
138 #
139 # runCBATestSuites is used to run a set of CBA tests
140 # make -f TestMakefile runCBATestSuites
141 #
142 # cleanupCBATestCertificates can be used to remove the test certificates
143 # make -f TestMakefile cleanupCBATestCertificates
144 ###############################################################################
145 include $(PEGASUS_ROOT)/mak/certificate_test.mak
|
146 jim.wunderlich 1.40
147 ############################################################
148 #
149 # rules defined here
150 #
151 ############################################################
152
|
153 jim.wunderlich 1.41 ##
154 ## Although the macros CIMSERVER_STOP_SERVICE and CIMSERVER_START_SERVICE
155 ## are available and could be invoked directly, their direct usage is
156 ## discouraged in favor of invoking the cimstop and the cimstart rules
|
157 kumpf 1.101 ## as this allows one place where additional checks, delays etc may be
|
158 jim.wunderlich 1.41 ## added in the future to control or further test the servers performance
159 ## in executing these commands.
160 ##
161
|
162 jim.wunderlich 1.40 #######################
163 #
164 # doc
165 #
|
166 kumpf 1.1 doc:
|
167 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/doc/ProviderSpec -f Makefile
168 $(MAKE) --directory=$(PEGASUS_ROOT)/doc/DevManual -f Makefile
|
169 kumpf 1.1
|
170 jim.wunderlich 1.40
171 #######################
172 #
173 # repositoryServer
174 #
175 repositoryServer: FORCE
|
176 kumpf 1.22 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
177 kumpf 1.19 $(SLEEP) 5
|
178 kumpf 1.90 $(RMREPOSITORY) $(REPOSITORY_ROOT)
|
179 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
|
180 kumpf 1.19 $(SLEEP) 5
|
181 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer
182 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer
|
183 mday 1.6
|
184 jim.wunderlich 1.40 ######################
185 #
186 # prestarttests is being deprecated since poststarttest is being deprecated
|
187 kumpf 1.101 # in favor of name more related to its intended functionality.
|
188 jim.wunderlich 1.40 #
189 prestarttests: prestarttests_msg shortsleep unittests
190
191 prestarttests_msg: FORCE
192 @$(ECHO) "=============================================================================="
193 @$(ECHO) "TestMakefile: The \"prestarttests\" rule is being deprecated."
194 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
|
195 kumpf 1.101 @$(ECHO) " The equivalent new rule is \"unittests\"."
|
196 jim.wunderlich 1.40 @$(ECHO) " Invoking the \"unittests\" rule now."
197 @$(ECHO) "=============================================================================="
198
199 ####################
200 #
|
201 kumpf 1.101 # poststarttests is being deprecated since it multiply defines a
|
202 jim.wunderlich 1.40 # recursive make rule leading to ambuguity and confusion.
203 #
|
204 kumpf 1.101 poststarttests: poststarttests_msg shortsleep servertests
|
205 jim.wunderlich 1.40
206 poststarttests_msg: FORCE
207 @$(ECHO) "==============================================================================="
|
208 kumpf 1.101 @$(ECHO) "TestMakefile: The \"posstarttests\" rule is being deprecated.."
|
209 jim.wunderlich 1.40 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
|
210 kumpf 1.101 @$(ECHO) " The equivalent new rule is \"servertests\"."
|
211 jim.wunderlich 1.40 @$(ECHO) " Invoking the \"servertests\" rule now."
212 @$(ECHO) "==============================================================================="
213
214 #####################
215 #
|
216 kumpf 1.101 # tests is being deprecated since it multiply defines a
|
217 jim.wunderlich 1.40 # recursive make rule leading to ambuguity and confusion.
218 #
219 tests: tests_msg shortsleep alltests
220
221 tests_msg: FORCE
222 @$(ECHO) "==================================================================="
223 @$(ECHO) "TestMakefile: The \"tests\" rule is being deprecated."
224 @$(ECHO) " Use \"make testusage\" for a description of the usage model."
|
225 kumpf 1.101 @$(ECHO) " The equivalent new rule is \"alltests\"."
|
226 jim.wunderlich 1.40 @$(ECHO) " Invoking the \"alltests\" rule now."
227 @$(ECHO) "==================================================================="
228
229
230 shortsleep: FORCE
231 @$(SLEEP) 5
232
233 ####################
234 #
235 # unittests
236 #
237 unittests: FORCE
|
238 h.sterling 1.38 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile tests
|
239 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile unittests complete"
240
241 #####################
242 #
243 # servertests
244 #
|
245 kumpf 1.1
|
246 jim.wunderlich 1.40 servertestsclean: FORCE
|
247 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
248 lucier 1.17 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/CQL/tests/Queries -f Makefile clean
249 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/Query/QueryExpression/tests/Queries -f Makefile clean
|
250 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile clean
|
251 jim.wunderlich 1.31
|
252 jim.wunderlich 1.40 servertestssetup: FORCE
|
253 denise.eckstein 1.50 ifdef PEGASUS_HAS_SSL
|
254 jim.wunderlich 1.61 #
|
255 kumpf 1.101 # The association between user names and certificates is stored in the
|
256 jim.wunderlich 1.61 # repository. If the repository is recreated, we also need to re-initialize
|
257 kumpf 1.101 # the trust store directories. Otherwise, the truststore content will be
|
258 jim.wunderlich 1.61 # out-of-sync with the mapping stored in the repository.
259 #
|
260 w.otsuka 1.76 # NOTE: Tests that require their own test namespaces to run poststarttests
261 # should add their namespace creation make commands to pegasus/Makefile
262 # under the testrepository tag.
263 #
|
264 denise.eckstein 1.50 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile removeSSLTrustDirectories
265 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile createSSLTrustDirectories
266 endif
|
267 jim.wunderlich 1.40 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
268 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository
|
269 denise.eckstein 1.69 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
270 cleanupCBATestCertificates
271 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
272 setupCBATestCertificates
|
273 jim.wunderlich 1.41 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
|
274 kumpf 1.19 $(SLEEP) 5
|
275 jim.wunderlich 1.61 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
276 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile Create_SSL_Certificate
|
277 denise.eckstein 1.73 ifeq ($(PEGASUS_TEST_SDK),true)
|
278 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples -f Makefile setupSDK
|
279 denise.eckstein 1.73 endif
|
280 kumpf 1.98 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
|
281 denise.eckstein 1.73
|
282 dave.sudlik 1.78 # slptests are run under separate target because these testcases require that
283 # both the cimserver and SLP are running. There is no need for special options
284 # while starting cimserver.
285 slptests:
286 $(MAKE) --directory=$(PEGASUS_ROOT)/src/slp/tests/slptests -f Makefile slptests
287 @ $(ECHO) "+++++ TestMakefile slp test suite completed"
|
288 jim.wunderlich 1.40
289 servertests: servertestsclean servertestssetup serversuite
290 @ $(ECHO) "+++++ TestMakefile servertests suites complete"
291
292 serversuite: FORCE
|
293 kumpf 1.98 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Pegasus/Server/tests -f Makefile commandtests
|
294 amit99shah 1.115 ifeq ($(PEGASUS_ENABLE_SLP),true)
295 $(MAKE) --directory=$(PEGASUS_ROOT)/src/slp/tests/srv_reg/ -f Makefile tests
296 endif
|
297 kumpf 1.98 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
|
298 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests
|
299 jim.wunderlich 1.33 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestBinRepository
|
300 w.otsuka 1.76 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_Cimsub_InterOp
|
301 kumpf 1.20 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOP_TS1
|
302 carolann.graves 1.28 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_IndInit_TS1
|
303 carolann.graves 1.67 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS1
304 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS2
|
305 carolann.graves 1.74 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_OOPProvFail_TS3
|
306 denise.eckstein 1.47 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_INDSSL_TS1
|
307 sushma.fernandes 1.84 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_IPV4_TS1
308 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_IPV6_TS1
309 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SSL_CBA_TS1
|
310 kumpf 1.46 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_G11N_TS1
|
311 denise.eckstein 1.69 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile runCBATestSuites
|
312 denise.eckstein 1.73 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_SDK_TS1
|
313 carolann.graves 1.75 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_ExportClientSSL_TS1
|
314 sahana.prabhakar 1.103 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_Cimserver_Availability
|
315 rohini.deshpande 1.108 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_sslCipherSuiteTests
|
316 kumpf 1.87 ifeq ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER),true)
|
317 s.kodali 1.85 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_Cmpi_Sub
318 endif
|
319 s.kodali 1.105 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimprovagt32tests
|
320 marek 1.111 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile chgdhoststests
|
321 dave.sudlik 1.88 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_idleConnectionTimeout1
322 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_idleConnectionTimeout2
|
323 venkat.puvvada 1.107 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_providerLifecycleIndicationTests
|
324 dev.meetei 1.110 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimListenAddress
325 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_interfaceRestrictionTest
|
326 anusha.kandepu 1.114 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_providerReregisterTests
|
327 kumpf 1.1
|
328 j.alex 1.66 #####################
329 #
330 # stresstests
331 #
332 stresstests:
333 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile run_STRESS_TS1
334
|
335 jim.wunderlich 1.40 ####################
336 #
|
337 jim.wunderlich 1.45 # perftests - simple performance test until we have better
338 #
339 # - Turns statistics on (uses TestInterop until we have better)
|
340 kumpf 1.81 # - runs poststarttests suite and TestBenchmark
|
341 jim.wunderlich 1.45 # - runs cimperf to displat the statistics
|
342 kumpf 1.101 # - turns statistics off
|
343 jim.wunderlich 1.45 #
344 perftests: servertestsclean servertestssetup perfsuite
345
346 perfsuite: FORCE
347 $(PEGASUS_HOME)/bin/TestInterop on
348 $(TIME_CMD) $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile poststarttests
349 @ $(ECHO) " "
350 $(TIME_CMD) $(PEGASUS_HOME)/bin/TestClient
351 @ $(ECHO) " "
|
352 kumpf 1.81 $(TIME_CMD) $(PEGASUS_HOME)/bin/TestBenchmark
|
353 jim.wunderlich 1.45 @ $(ECHO) " "
354 @ $(ECHO) " "
355 $(TIME_CMD) $(PEGASUS_HOME)/bin/cimperf
356 @ $(ECHO) " "
357 $(PEGASUS_HOME)/bin/TestInterop off
358
|
359 jim.wunderlich 1.40
360 ####################
361 #
362 # alltests
363 #
364 alltests: unittests servertests
|
365 a.dunfey 1.79 ifeq ($(OS_TYPE),windows)
|
366 kumpf 1.22 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
367 mday 1.6 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile uninstall
|
368 tony 1.5 endif
|
369 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile alltests Complete"
|
370 kumpf 1.1
371 ###############################################################################
|
372 denise.eckstein 1.18 ## Test Suite Definitions
373 ###############################################################################
374
375 ###############################################################################
|
376 kumpf 1.101 ## OOP Test Suite 1: "Out-of-Process"(OOP) Provider Tests
|
377 denise.eckstein 1.18 ##
378 ## Configuration Options: forceProviderProcesses=true
379 ##
|
380 jim.wunderlich 1.54 ## If PEGASUS_DEFAULT_ENABLE_OOP is set, then tests are run with OOP disabled
|
381 jim.wunderlich 1.51 ## since tests have already been run with OOP enabled.
382 ##
383 ##
|
384 denise.eckstein 1.18 ###############################################################################
|
385 jim.wunderlich 1.54 ifeq ($(PEGASUS_DEFAULT_ENABLE_OOP),true)
|
386 jim.wunderlich 1.52 OOP_TS1_CONFIG_OPTIONS = forceProviderProcesses=false
387 else
|
388 denise.eckstein 1.18 OOP_TS1_CONFIG_OPTIONS = forceProviderProcesses=true
|
389 kumpf 1.44 endif
|
390 jim.wunderlich 1.51
|
391 kumpf 1.96 ifeq ($(PEGASUS_ENABLE_PRIVILEGE_SEPARATION),true)
392 # When privilege separation is enabled, most providers run out of process
393 # regardless of the forceProviderProcesses setting. The exception is
394 # providers that register with UserContext = 5 (CIM Server). The only
395 # case of this in the automated tests is the UserContextTestProvider.
396 OOP_TS1_TEST_CMDS = \
397 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/UserContextTestProvider/testclient@@poststarttests
398 else
399 OOP_TS1_TEST_CMDS = \
400 $(MAKE)@@--directory=$(PEGASUS_ROOT)@@-f@@Makefile@@poststarttests
401 endif
|
402 denise.eckstein 1.18
403 run_OOP_TS1:
|
404 denise.eckstein 1.26 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
405 denise.eckstein 1.18 CIMSERVER_CONFIG_OPTIONS="$(OOP_TS1_CONFIG_OPTIONS)" \
406 TESTSUITE_CMDS="$(OOP_TS1_TEST_CMDS)"
|
407 jim.wunderlich 1.51
|
408 denise.eckstein 1.18 ###############################################################################
409
410 ###############################################################################
|
411 kumpf 1.101 ## IndInit Test Suite 1: IndicationService Initialization Tests
|
412 carolann.graves 1.28 ##
413 ## Configuration Options: (none)
414 ##
415 ###############################################################################
|
416 kumpf 1.101 IndInit_TS1_CONFIG_OPTIONS =
|
417 carolann.graves 1.28 IndInit_TS1a_TEST_CMDS = \
418 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/IndicationService/tests/ProcessIndication@@IndInit_TS1a
419 IndInit_TS1b_TEST_CMDS = \
420 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/IndicationService/tests/ProcessIndication@@IndInit_TS1b
421
422 run_IndInit_TS1:
423 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
424 CIMSERVER_CONFIG_OPTIONS="$(IndInit_TS1_CONFIG_OPTIONS)" \
425 TESTSUITE_CMDS="$(IndInit_TS1a_TEST_CMDS)"
426 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
427 CIMSERVER_CONFIG_OPTIONS="$(IndInit_TS1_CONFIG_OPTIONS)" \
428 TESTSUITE_CMDS="$(IndInit_TS1b_TEST_CMDS)"
429
430 ###############################################################################
|
431 carolann.graves 1.67 ## OOPProvFail Test Suite 1: OOP Provider Module Failure Tests
432 ##
433 ## Configuration Options: forceProviderProcesses=true
434 ## enableAuthentication=true, enableAuthentication=false
435 ##
436 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
437 ## suite is always run with OOP enabled. This test suite causes a provider to
438 ## exit. Running this test suite with OOP disabled would cause the cimserver
439 ## to exit and the test suite to fail.
440 ##
441 ## NOTE: The test is run once with authentication enabled, and once without
442 ## authentication enabled.
443 ##
444 ###############################################################################
|
445 venkat.puvvada 1.104 OOPProvFail_TS1a_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true maxFailedProviderModuleRestarts=0
446 OOPProvFail_TS1b_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=false maxFailedProviderModuleRestarts=0
|
447 carolann.graves 1.67 OOPProvFail_TS1_TEST_CMDS = \
448 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS1
449
|
450 carolann.graves 1.68 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
451 carolann.graves 1.67 run_OOPProvFail_TS1:
452 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
453 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS1a_CONFIG_OPTIONS)" \
454 TESTSUITE_CMDS="$(OOPProvFail_TS1_TEST_CMDS)"
455 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
456 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS1b_CONFIG_OPTIONS)" \
457 TESTSUITE_CMDS="$(OOPProvFail_TS1_TEST_CMDS)"
|
458 carolann.graves 1.68 else
459 run_OOPProvFail_TS1: FORCE
460 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS1"
461 endif
|
462 carolann.graves 1.67
463 ###############################################################################
|
464 kumpf 1.101 ## OOPProvFail Test Suite 2: OOP Provider Module Failure on IndicationService
|
465 carolann.graves 1.67 ## Initialization Tests
466 ##
467 ## Configuration Options: forceProviderProcesses=true
468 ## enableAuthentication=true
469 ##
470 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
471 ## suite is always run with OOP enabled. This test suite causes a provider to
472 ## exit. Running this test suite with OOP disabled would cause the cimserver
473 ## to exit and the test suite to fail.
474 ##
475 ###############################################################################
476 OOPProvFail_TS2_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true
477 OOPProvFail_TS2a_TEST_CMDS = \
478 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS2a
479 OOPProvFail_TS2b_TEST_CMDS = \
480 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS2b
481
|
482 carolann.graves 1.68 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
483 carolann.graves 1.67 run_OOPProvFail_TS2:
484 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
485 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS2_CONFIG_OPTIONS)" \
486 TESTSUITE_CMDS="$(OOPProvFail_TS2a_TEST_CMDS)"
487 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
488 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS2_CONFIG_OPTIONS)" \
489 TESTSUITE_CMDS="$(OOPProvFail_TS2b_TEST_CMDS)"
|
490 carolann.graves 1.68 else
491 run_OOPProvFail_TS2: FORCE
492 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS2"
493 endif
|
494 carolann.graves 1.67
495 ###############################################################################
|
496 carolann.graves 1.74 ## OOPProvFail Test Suite 3: OOP Provider Module Failure CIM Server restart
497 ## Tests
498 ##
499 ## Configuration Options: forceProviderProcesses=true
500 ## enableAuthentication=true
501 ##
502 ## NOTE: Regardless of the setting of PEGASUS_DEFAULT_ENABLE_OOP, this test
503 ## suite is always run with OOP enabled. This test suite causes a provider to
504 ## exit. Running this test suite with OOP disabled would cause the cimserver
505 ## to exit and the test suite to fail.
506 ##
507 ###############################################################################
|
508 venkat.puvvada 1.104 OOPProvFail_TS3_CONFIG_OPTIONS = forceProviderProcesses=true enableAuthentication=true maxFailedProviderModuleRestarts=0
|
509 carolann.graves 1.74 OOPProvFail_TS3a_TEST_CMDS = \
510 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS3a
511 OOPProvFail_TS3b_TEST_CMDS = \
512 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/OOPModuleFailureProvider/testclient@@OOPProvFail_TS3b
513
514 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
515 run_OOPProvFail_TS3:
516 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
517 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS3_CONFIG_OPTIONS)" \
518 TESTSUITE_CMDS="$(OOPProvFail_TS3a_TEST_CMDS)"
519 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
520 CIMSERVER_CONFIG_OPTIONS="$(OOPProvFail_TS3_CONFIG_OPTIONS)" \
521 TESTSUITE_CMDS="$(OOPProvFail_TS3b_TEST_CMDS)"
522 else
523 run_OOPProvFail_TS3: FORCE
524 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_OOPProvFail_TS3"
525 endif
526
527 ###############################################################################
|
528 denise.eckstein 1.47 ## Indication SSL Test Suite 1: Indication Testing over HTTPS
529 ##
530 ## Configuration Options: (none)
531 ##
532 ###############################################################################
|
533 denise.eckstein 1.50 INDSSL_TS1a_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=false
|
534 denise.eckstein 1.47 INDSSL_TS1a_TEST_CMDS = \
|
535 denise.eckstein 1.50 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient@@-f@@Makefile@@run_TS1_AuthenticationDisabled
536
537 INDSSL_TS1b_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=true sslClientVerificationMode=required
|
538 denise.eckstein 1.47 INDSSL_TS1b_TEST_CMDS = \
|
539 denise.eckstein 1.50 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient@@-f@@Makefile@@run_TS1_AuthenticationEnabled
540
|
541 denise.eckstein 1.47
542 ifdef PEGASUS_HAS_SSL
|
543 jim.wunderlich 1.53 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
544 jim.wunderlich 1.61 run_INDSSL_TS1: EnableUsers Create_SSL_Certificate_ignore
|
545 denise.eckstein 1.47 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
546 denise.eckstein 1.50 CIMSERVER_CONFIG_OPTIONS="$(INDSSL_TS1a_CONFIG_OPTIONS)" \
|
547 denise.eckstein 1.47 TESTSUITE_CMDS="$(INDSSL_TS1a_TEST_CMDS)"
548 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
549 denise.eckstein 1.50 CIMSERVER_CONFIG_OPTIONS="$(INDSSL_TS1b_CONFIG_OPTIONS)" \
|
550 denise.eckstein 1.47 TESTSUITE_CMDS="$(INDSSL_TS1b_TEST_CMDS)"
551 else
552 run_INDSSL_TS1: FORCE
|
553 jim.wunderlich 1.53 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_INDSSL_TS1"
554 endif
555 else
556 run_INDSSL_TS1: FORCE
557 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_INDSSL_TS1"
|
558 denise.eckstein 1.47 endif
559
560
561 ###############################################################################
|
562 rohini.deshpande 1.112 ## WSMAN Indication test suite : WSMAN Indication Testing over HTTPS
563 ##
564 ## Configuration Options: (none for cimserver)
565 ## wsevensink should be installed as the wsman listner.
566 ##
|
567 rohini.deshpande 1.113 ## There is no WSMAN listner in OP as of now. Therefore, wseventsink of
568 ## openwsman is used. This is available only on Linux. On other OSes, the
569 ## destination of the subcription/indication should be changed to a Linux
570 ## system where wseventsink is running.
571 ## Once we have a wsman listner in OP we include this test in Nigthly tests.
572 ## As of now, this has to be run explicitly.
573 ##
|
574 rohini.deshpande 1.112 ###############################################################################
|
575 rohini.deshpande 1.113 ifeq ($(OS),linux)
|
576 rohini.deshpande 1.112 ifeq ($(PEGASUS_ENABLE_PROTOCOL_WSMAN),true)
577 INDWSMAN_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=false
578 INDWSMAN_TS1a_TEST_CMDS = \
579 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationTestProvider/wsmanTestClient@@-f@@Makefile@@runWSMANtests
580
581 run_WSMAN_TS: FORCE
582 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
583 CIMSERVER_CONFIG_OPTIONS="$(INDWSMAN_CONFIG_OPTIONS)" \
584 TESTSUITE_CMDS="$(INDWSMAN_TS1a_TEST_CMDS)"
585 endif
586 endif
587
588 ###############################################################################
|
589 kumpf 1.101
|
590 denise.eckstein 1.47 ###############################################################################
|
591 sushma.fernandes 1.84 ## SSL IPv4 Test Suite : Tests SSL connections for IPv4
592 ##
593 ## Configuration Options: enableHttpsConnection=true
594 ## NOTE : Authentication is not enabled as we are only verifying
595 ## if SSL based IPv6 connections are working correctly. The osinfo
596 ## client requires a password to be passed for a remote connection
|
597 kumpf 1.101 ## otherwise it will prompt for one. As a work around,
598 ## we are providing a dummy password.
|
599 sushma.fernandes 1.84 ##
600 ###############################################################################
|
601 ouyang.jian 1.91 SSL_IPV4_TS1_CONFIG_OPTIONS = enableHttpsConnection=true \
602 enableAuthentication=false
|
603 sushma.fernandes 1.84 SSL_IPV4_TS1_CMD_1 = \
604 osinfo -s -w notapassword -h 127.0.0.1 -p 5989
605 SSL_IPV4_TS1_CMD_2 = \
606 osinfo -s -w notapassword -h localhost -p 5989
607
608 ifdef PEGASUS_HAS_SSL
609 run_SSL_IPV4_TS1: FORCE
610 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
611 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV4_TS1_CONFIG_OPTIONS)" \
612 TESTSUITE_CMDS="$(SSL_IPV4_TS1_CMD_1)"
613 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
614 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV4_TS1_CONFIG_OPTIONS)" \
615 TESTSUITE_CMDS="$(SSL_IPV4_TS1_CMD_2)"
616 else
617 run_SSL_IPV4_TS1: FORCE
618 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_IPV4_TS1"
619 endif
620
621 ###############################################################################
622 ## SSL IPv6 Test Suite : Tests SSL connections for IPv6
623 ##
624 sushma.fernandes 1.84 ## Configuration Options: enableHttpsConnection=true
625 ## NOTE : Authentication is not enabled as we are only verifying
626 ## if SSL based IPv6 connections are working correctly. The osinfo
627 ## client requires a password to be passed for a remote connection
628 ## otherwise it will prompt for one. As a work around,
|
629 kumpf 1.101 ## we are providing a dummy password.
|
630 sushma.fernandes 1.84 ##
|
631 sushma.fernandes 1.86 ## The IPv4-mapped IPv6 address test is only enabled for unix
632 ## platforms as Windows does not support IPv4-mapped IPv6 addresses
|
633 kumpf 1.101 ## on certain versions.
|
634 sushma.fernandes 1.86 ##
|
635 sushma.fernandes 1.84 ###############################################################################
|
636 ouyang.jian 1.91 SSL_IPV6_TS1_CONFIG_OPTIONS = enableHttpsConnection=true \
637 enableAuthentication=false
|
638 sushma.fernandes 1.84 SSL_IPV6_TS1_CMD_1 = \
639 osinfo -s -w notapassword -h ::1 -p 5989
640 SSL_IPV6_TS1_CMD_2 = \
641 osinfo -s -w notapassword -h ::ffff:127.0.0.1 -p 5989
642
643 ifdef PEGASUS_HAS_SSL
644 run_SSL_IPV6_TS1: FORCE
645 ifeq ($(PEGASUS_TEST_IPV6), true)
646 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
647 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV6_TS1_CONFIG_OPTIONS)" \
648 TESTSUITE_CMDS="$(SSL_IPV6_TS1_CMD_1)"
|
649 sushma.fernandes 1.86 ifeq ($(OS_TYPE), unix)
|
650 sushma.fernandes 1.84 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
651 CIMSERVER_CONFIG_OPTIONS="$(SSL_IPV6_TS1_CONFIG_OPTIONS)" \
652 TESTSUITE_CMDS="$(SSL_IPV6_TS1_CMD_2)"
|
653 sushma.fernandes 1.86 endif
|
654 sushma.fernandes 1.84 else
655 @ $(ECHO) "+++++ PEGASUS_TEST_IPV6 not defined: Skipping run_SSL_IPV6_TS1"
656 endif
657 else
658 run_SSL_IPV6_TS1: FORCE
659 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_IPV6_TS1"
660 endif
661
662 ###############################################################################
663 ## CBA SSL Test Suite 1: Certificate based authentication Tests
|
664 nag.boranna 1.27 ##
665 ## Configuration Options: enableAuthentication=true
666 ## enableHttpsConnection=true
667 ## sslClientVerificationMode=optional
668 ## sslTrustStoreUserName=$(CURRENT_USER)
669 ##
670 ###############################################################################
|
671 sushma.fernandes 1.84 SSL_CBA_TS1_CONFIG_OPTIONS = enableHttpsConnection=true enableAuthentication=true \
|
672 nag.boranna 1.27 sslClientVerificationMode=optional sslTrustStoreUserName=$(CURRENT_USER)
|
673 sushma.fernandes 1.84 SSL_CBA_TS1_TEST_CMD_1 = \
|
674 sushma.fernandes 1.71 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Clients/cimtrust/tests@@SSLCertificateTest1
|
675 sushma.fernandes 1.84 SSL_CBA_TS1_TEST_CMD_2 = \
|
676 sushma.fernandes 1.72 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Clients/cimcrl/tests@@SSLCRLTest1
|
677 nag.boranna 1.27
|
678 jim.wunderlich 1.39 ifdef PEGASUS_HAS_SSL
|
679 jim.wunderlich 1.53 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
680 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
|
681 nag.boranna 1.27 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
682 sushma.fernandes 1.84 CIMSERVER_CONFIG_OPTIONS="$(SSL_CBA_TS1_CONFIG_OPTIONS)" \
683 TESTSUITE_CMDS="$(SSL_CBA_TS1_TEST_CMD_1)"
|
684 sushma.fernandes 1.72 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
|
685 sushma.fernandes 1.84 CIMSERVER_CONFIG_OPTIONS="$(SSL_CBA_TS1_CONFIG_OPTIONS)" \
686 TESTSUITE_CMDS="$(SSL_CBA_TS1_TEST_CMD_2)"
|
687 jim.wunderlich 1.39 else
|
688 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
689 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping run_SSL_CBA_TS1"
|
690 jim.wunderlich 1.53 endif
691 else
|
692 sushma.fernandes 1.84 run_SSL_CBA_TS1: FORCE
693 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_SSL_CBA_TS1"
|
694 jim.wunderlich 1.39
695 endif
696
|
697 jim.wunderlich 1.61 ############################################################################
|
698 kumpf 1.101 #
|
699 jim.wunderlich 1.61 # Create_SSL_Certificate
700 #
701 # create a certificate that can be used for certification testing.
702 # It is currently used by the following tests:
703 # -run_INDSSL_TS1
704 #
705 Create_SSL_Certificate_ignore: FORCE
706 -$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile Create_SSL_Certificate
707
708 Create_SSL_Certificate: FORCE
709 ifdef PEGASUS_HAS_SSL
710 ifdef PEGASUS_TEST_USER_DEFINED
711 $(ECHO) "Creating SSL certificate for test"
|
712 sushma.fernandes 1.71 cimtrust -a -U $(PEGASUS_TEST_USER_ID) -f $(PEGASUS_HOME)/server.pem -Ts
|
713 jim.wunderlich 1.61 endif
714 else
715 $(ECHO) "PEGASUS_HAS_SSL not defined - Not Creating SSL certificate for test"
716 endif
717
|
718 rohini.deshpande 1.108 ############################################################################
719 ##
720 ## run_sslCipherSuiteTests
721 ##
722 ## Configuration Options: enableHttpsConnection=true
723 ## sslCipherSuite=HIGH
724 ##
725 ############################################################################
726
727 SSL_CIPHER_SUITE_TEST_CONFIG_OPTIONS= enableHttpsConnection=true sslCipherSuite=HIGH
728 SSL_CIPHER_SUITE_TEST_CMDS= \
729 $(MAKE)@@--directory \
730 $(PEGASUS_ROOT)/src/Pegasus/Client/tests/SSLCipherVerification/ \
731 -f@@Makefile@@sslCipherSuiteTests
732
733 ifdef PEGASUS_HAS_SSL
734 run_sslCipherSuiteTests:
735 @$(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
736 CIMSERVER_CONFIG_OPTIONS="$(SSL_CIPHER_SUITE_TEST_CONFIG_OPTIONS)" \
737 TESTSUITE_CMDS="$(SSL_CIPHER_SUITE_TEST_CMDS)"
738 else
739 rohini.deshpande 1.108 run_sslCipherSuiteTests: FORCE
740 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_sslCipherSuiteTests"
741 endif
742
743
|
744 kumpf 1.46 ###############################################################################
|
745 kumpf 1.101 ## G11N Test Suite 1: Globalization Tests
|
746 kumpf 1.46 ##
747 ## Configuration Options: forceProviderProcesses=false
748 ##
749 ###############################################################################
750 G11N_TS1_CONFIG_OPTIONS = forceProviderProcesses=false
751 G11N_TS1_TEST_CMDS = \
752 $(MAKE) --directory $(PEGASUS_ROOT)/src/Clients/g11ntest \
753 -f Makefile g11ntest
754
755 run_G11N_TS1:
756 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
757 CIMSERVER_CONFIG_OPTIONS="$(G11N_TS1_CONFIG_OPTIONS)" \
758 TESTSUITE_CMDS="$(G11N_TS1_TEST_CMDS)"
|
759 j.alex 1.66
760 ###############################################################################
761 ## Stress Test Suite 1: Default Stress Tests
762 ##
763 ## Configuration Options: (none)
764 ##
765 ###############################################################################
766 STRESS_TS1_CONFIG_OPTIONS =
767 STRESS_TS1_TEST_CMDS = \
768 TestStressTestController
769
770 run_STRESS_TS1:
771 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
772 CIMSERVER_CONFIG_OPTIONS="$(STRESS_TS1_CONFIG_OPTIONS)" \
773 TESTSUITE_CMDS="$(STRESS_TS1_TEST_CMDS)"
|
774 kumpf 1.46 ###############################################################################
775
|
776 denise.eckstein 1.73 ###############################################################################
777 ## SDK Test Suite 1: SDK Tests
778 ##
779 ## Configuration Options: (none)
780 ##
781 ###############################################################################
782 SDK_TS1_CONFIG_OPTIONS =
783 SDK_TS1_TEST_CMDS = \
784 $(MAKE) --directory $(PEGASUS_ROOT)/src/SDK/samples \
|
785 kumpf 1.101 -f Makefile testSDK
|
786 denise.eckstein 1.73
787 ifeq ($(PEGASUS_TEST_SDK),true)
788 run_SDK_TS1: FORCE
789 $(MAKE) --directory=$(PEGASUS_ROOT)/mak \
790 -f $(PEGASUS_ROOT)/mak/SDKMakefile stageINCLUDE \
791 PEGASUS_STAGING_DIR=$(PEGASUS_HOME) \
792 PEGASUS_INCLUDE_DIR=/include
793 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples \
794 -f Makefile clean
795 $(MAKE) --directory=$(PEGASUS_ROOT)/src/SDK/samples \
796 -f Makefile PEGASUS_INCLUDE_DIR=$(PEGASUS_HOME)/include
797 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
798 CIMSERVER_CONFIG_OPTIONS="$(SDK_TS1_CONFIG_OPTIONS)" \
799 TESTSUITE_CMDS="$(SDK_TS1_TEST_CMDS)"
800 else
801 run_SDK_TS1: FORCE
802 @ $(ECHO) "+++++ PEGASUS_TEST_SDK is not true: Skipping run_SDK_TS1"
803 endif
804 ###############################################################################
|
805 jim.wunderlich 1.39
|
806 nag.boranna 1.27 ###############################################################################
|
807 carolann.graves 1.75 ## Export Client SSL Test Suite 1:
808 ##
809 ## Configuration Options: enableHttpsConnection=true
810 ##
811 ###############################################################################
812 ExportClientSSL_TS1_CONFIG_OPTIONS = enableHttpsConnection=true
813 ExportClientSSL_TS1_TEST_CMDS = \
814 $(MAKE)@@--directory=$(PEGASUS_ROOT)/src/Pegasus/ExportClient/tests/ExportClient@@-f@@Makefile@@runExportClientSSL_TS1
815
816 ifdef PEGASUS_HAS_SSL
817 run_ExportClientSSL_TS1:
818 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
819 CIMSERVER_CONFIG_OPTIONS="$(ExportClientSSL_TS1_CONFIG_OPTIONS)" \
820 TESTSUITE_CMDS="$(ExportClientSSL_TS1_TEST_CMDS)"
821 else
822 run_ExportClientSSL_TS1: FORCE
823 @ $(ECHO) "+++++ PEGASUS_HAS_SSL not defined: Skipping run_ExportClientSSL_TS1"
824 endif
825
826 ###############################################################################
|
827 nag.boranna 1.27
|
828 jim.wunderlich 1.34
829
|
830 w.otsuka 1.76 ###############################################################################
|
831 dave.sudlik 1.88 ## idleConnectionTimeout Test Suite 1: uses ChunkingStressProvider Tests
832 ##
|
833 dave.sudlik 1.89 ## Configuration Options: idleConnectionTime=55
|
834 dave.sudlik 1.88 ##
835 ###############################################################################
|
836 dave.sudlik 1.89 IDLE_CONNECTION_TIMEOUT_1_CONFIG_OPTIONS = idleConnectionTimeout=55
|
837 dave.sudlik 1.88 IDLE_CONNECTION_TIMEOUT_1_TEST_CMDS = \
838 $(MAKE)@@--directory \
839 $(PEGASUS_ROOT)/src/Providers/TestProviders/ChunkingStressProvider/testclient \
840 -f@@Makefile@@poststarttests
841 run_idleConnectionTimeout1: FORCE
842 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
843 CIMSERVER_CONFIG_OPTIONS="$(IDLE_CONNECTION_TIMEOUT_1_CONFIG_OPTIONS)" \
844 TESTSUITE_CMDS="$(IDLE_CONNECTION_TIMEOUT_1_TEST_CMDS)"
845 ###############################################################################
846
847 ###############################################################################
848 ## idleConnectionTimeout Test Suite 2: uses IdleConnectionTimeout client test
849 ##
850 ## Configuration Options: idleConnectionTime=6
851 ##
852 ###############################################################################
853 IDLE_CONNECTION_TIMEOUT_2_CONFIG_OPTIONS = idleConnectionTimeout=6
854 IDLE_CONNECTION_TIMEOUT_2_TEST_CMDS = \
855 $(MAKE)@@--directory \
856 $(PEGASUS_ROOT)/src/Pegasus/Client/tests/IdleConnectionTimeout/ \
857 -f@@Makefile@@timeoutTest@@IDLETIME=10
858 dave.sudlik 1.88 run_idleConnectionTimeout2: FORCE
859 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
860 CIMSERVER_CONFIG_OPTIONS="$(IDLE_CONNECTION_TIMEOUT_2_CONFIG_OPTIONS)" \
861 TESTSUITE_CMDS="$(IDLE_CONNECTION_TIMEOUT_2_TEST_CMDS)"
862 ###############################################################################
863
|
864 sahana.prabhakar 1.103 ###############################################################################
865 ## cimserver thread limit test:
866 ##
867 ## Configuration Options: none
868 ##
869 ###############################################################################
870 CIMSERVER_THREAD_LIMIT_TEST_CONFIG_OPTIONS = forceProviderProcesses=true
871 CIMSERVER_THREAD_LIMIT_TEST_CMDS = \
872 $(MAKE)@@--directory \
873 $(PEGASUS_ROOT)/src/Providers/TestProviders/FaultyInstanceProvider/testclient \
874 -f@@Makefile@@runAvailabilityTest
875 run_Cimserver_Availability: FORCE
876 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
877 CIMSERVER_CONFIG_OPTIONS="$(CIMSERVER_THREAD_LIMIT_TEST_CONFIG_OPTIONS)" \
878 TESTSUITE_CMDS="$(CIMSERVER_THREAD_LIMIT_TEST_CMDS)"
879 ###############################################################################
|
880 dave.sudlik 1.88
881 ###############################################################################
|
882 w.otsuka 1.76 ## cimsub CLI Test Suite 1: PG_InterOp Tests
883 ##
884 ## Configuration Options: (none)
885 ##
886 ###############################################################################
887 CIMSUB_INTEROP_CONFIG_OPTIONS =
888 CIMSUB_INTEROP_TEST_CMDS = \
889 $(MAKE) --directory \
890 $(PEGASUS_ROOT)/src/Clients/cimsub/tests/testscriptInterOp \
891 -f Makefile cimsubTest_InterOp
892 run_Cimsub_InterOp: FORCE
893 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
894 CIMSERVER_CONFIG_OPTIONS="$(CIMSUB_INTEROP_CONFIG_OPTIONS)" \
895 TESTSUITE_CMDS="$(CIMSUB_INTEROP_TEST_CMDS)"
896 ###############################################################################
897
898 ###############################################################################
|
899 s.kodali 1.85 ## CMPI subscription activation Test Suite 1:
900 ##
901 ## Configuration Options: (none)
902 ##
903 ###############################################################################
904 CMPI_SUB_TEST_CONFIG_OPTIONS=
905 CMPI_SUBa_TEST_CMDS = \
906 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider setup WQL
907 CMPI_SUBb_TEST_CMDS = \
908 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider getSubscriptionCount
909 CMPI_SUBc_TEST_CMDS = \
910 TestIndicationStressTest TestCMPI_IndicationStressTestClass test/TestProvider cleanup
911 run_Cmpi_Sub: FORCE
912 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
913 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
914 TESTSUITE_CMDS="$(CMPI_SUBa_TEST_CMDS)"
915 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
916 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
917 TESTSUITE_CMDS="$(CMPI_SUBb_TEST_CMDS)"
918 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
919 CIMSERVER_CONFIG_OPTIONS="$(CMPI_SUB_TEST_CONFIG_OPTIONS)" \
920 s.kodali 1.85 TESTSUITE_CMDS="$(CMPI_SUBc_TEST_CMDS)"
|
921 kumpf 1.101
|
922 s.kodali 1.85 ##############################################################################
|
923 w.otsuka 1.76
924
|
925 s.kodali 1.105 #############################################################################
926 ##
927 ## 32-bit provider tests on 64-bit CIMServer
928 ##
929 #############################################################################
930
931 TEST_32BIT_CONFIG_OPTIONS = providerDir=lib32:lib
932 TEST_32BIT_CMDS = \
933 $(MAKE)@@--directory \
934 $(PEGASUS_ROOT)/src/Providers/TestProviders -f@@Makefile.cimprovagt32tests@@cimprovagt32tests
935 cimprovagt32tests: FORCE
|
936 venkat.puvvada 1.106 ifdef PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT
|
937 s.kodali 1.105 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
938 CIMSERVER_CONFIG_OPTIONS="$(TEST_32BIT_CONFIG_OPTIONS)" \
939 TESTSUITE_CMDS="$(TEST_32BIT_CMDS)"
|
940 venkat.puvvada 1.106 else
941 @$(ECHO) "PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT not defined, skipping 32-bit tests..."
942 endif
|
943 s.kodali 1.105
|
944 marek 1.111 #############################################################################
945 ##
946 ## CIMServer with overridden hostnames testing
947 ##
948 #############################################################################
949
950 TEST_CHGD_HOSTS_OPTIONS = "hostname=hugo fullyQualifiedHostName=hugo.bert"
951 TEST_CHGD_HOSTS_CMDS = \
952 $(MAKE)@@--directory \
953 $(PEGASUS_ROOT)/src/Pegasus/Config/tests/ChgdHosts@@chgdhoststest
954 chgdhoststests: FORCE
955 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
956 CIMSERVER_CONFIG_OPTIONS=$(TEST_CHGD_HOSTS_OPTIONS) \
957 TESTSUITE_CMDS="$(TEST_CHGD_HOSTS_CMDS)"
958
|
959 venkat.puvvada 1.107
960 #############################################################################
961 ##
962 ## provider lifecycle indications tests
963 ##
964 #############################################################################
965 run_providerLifecycleIndicationTests: FORCE
966 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/TestProviderLifecycleIndications/testclient -f Makefile setupLogFile
967 -$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
968 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="forceProviderProcesses=true maxFailedProviderModuleRestarts=1"
969 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/TestProviderLifecycleIndications/testclient -f Makefile createPLISubscription
970 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
971 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="forceProviderProcesses=true maxFailedProviderModuleRestarts=1"
972 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/TestProviderLifecycleIndications/testclient -f Makefile testPLI
973 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/TestProviderLifecycleIndications/testclient -f Makefile deletePLISubscription
974 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
975 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/TestProviderLifecycleIndications/testclient -f Makefile testLogFile
976
|
977 dev.meetei 1.110
978 #############################################################################
|
979 anusha.kandepu 1.114 #
980 # Provider reregistration tests.
981 #
982 ##############################################################################
983 run_providerReregisterTests:FORCE
984 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
985 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
986 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient -f Makefile createSubscriptions
987 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
988 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
989 $(MAKE) --directory $(PEGASUS_ROOT)/src/Providers/TestProviders/IndicationStressTestProvider/testclient -f Makefile reregister_providerTests
990 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
991
992
993 #############################################################################
|
994 dev.meetei 1.110 ##
995 ## Network Interface restriction tests
996 ##
997 ## Configuration Options: enableHttpsConnection=true
998 ## enableHttpConnection=true
999 ## listenAddress=x.y.x.z
1000 ##
1001 #############################################################################
1002 startcimListenAddress: FORCE
1003 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableHttpConnection=true enableHttpsConnection=true listenAddress=::1,127.0.0.1"
1004 $(SLEEP) 5
1005
1006
1007
1008 LISTENING_ADD = $(shell TestListenAddress getSystemInterface)
1009 RESTRICT_INTRFC_TEST_CONFIG_OPTIONS= enableHttpConnection=true enableHttpsConnection=true listenAddress=$(LISTENING_ADD)
1010 RESTRICT_INTRFC_TEST_CMDS=$(MAKE)@@--directory $(PEGASUS_ROOT)/src/Pegasus/Server/tests/InterfaceRestriction@@-f@@Makefile@@RestrictionTest
1011
1012 ifneq ($(strip $(LISTENING_ADD)),)
1013 run_interfaceRestrictionTest:FORCE
1014 $(MAKE) -f $(PEGASUS_ROOT)/TestMakefile runTestSuite \
1015 dev.meetei 1.110 CIMSERVER_CONFIG_OPTIONS="$(RESTRICT_INTRFC_TEST_CONFIG_OPTIONS)" \
1016 TESTSUITE_CMDS="$(RESTRICT_INTRFC_TEST_CMDS)"
1017 else
1018 run_interfaceRestrictionTest:FORCE
1019 @ $(ECHO) "+++++ No Network Interface Detected: Skipping Network Restriction Test+++++++"
1020 endif
1021
1022
|
1023 jim.wunderlich 1.34 ##############################################################################
1024 ##
1025 ## TestXMLRepository rule is used to run the poststarttests suite on
1026 ## the XML Repository built using cimmofl
1027 ##
1028 ## TestXMLRepositoryServer rule is used to run the poststarttests suite on
1029 ## the XML Repository built using cimmof
1030 ##
|
1031 kumpf 1.101 ## TestXMLCmpRepository rule is used to run the poststarttest suite on
|
1032 jim.wunderlich 1.34 ## the XML Compressed Repository built using cimmofl
1033 ##
1034
1035 ############################
1036 ##
1037 ## TestXMLRepository
1038 ##
1039
1040 TestXMLRepository: TestXMLClean TestXMLBuildRepo TestXMLRepo
1041 @ $(ECHO) TestXMLRepository +++++ passed all test
1042
1043 ############################
1044 ##
1045 ## TestXMLRepositoryServer
1046 ##
1047 TestXMLRepositoryServer: TestXMLClean TestXMLBuildRepoServ TestXMLRepo
1048 @ $(ECHO) TestXMLRepositoryServer +++++ passed all test
1049
1050 ############################
1051 ##
1052 ## TestXMLCmpRepository - run poststarttest on Compressed BIN Repository
1053 jim.wunderlich 1.34 ##
1054 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY
1055 TestXMLCmpRepository: FORCE
1056 @ $(ECHO) TestXMLCmpRepository +++++ Repository compressed by default - nothing more to test.
1057 @ $(ECHO) TestXMLCmpRepository +++++ passed all test
1058 else
1059
1060 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST
1061
1062 TestXMLCmpRepository: TestXMLClean TestCmpBuild TestXMLBuildRepo TestXMLRepo TestRegBuild
1063 @ $(ECHO) TestXMLCmpRepository +++++ passed all test
1064 else
1065 TestXMLCmpRepository: FORCE
|
1066 kumpf 1.101 @ $(ECHO) TestXMLCmpRepository +++++ Not tested
|
1067 jim.wunderlich 1.34 @ $(ECHO) TestXMLCmpRepository +++++ refer to readme.compressed_repository
|
1068 kumpf 1.101 @ $(ECHO) TestXMLCmpRepository +++++ to enable: set PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST=true
|
1069 jim.wunderlich 1.34 endif
1070 endif
1071
1072 ###########################
1073 ##
1074 ## TestXMLClean
1075 ##
1076 TestXMLClean: FORCE
|
1077 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1078 jim.wunderlich 1.34 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryclean REPOSITORY_NAME=repository_xml
1079
1080
1081 ###########################
1082 ##
1083 ## TestXMLStartServer
1084 ##
1085 TestXMLStartServer: FORCE
1086 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile install_run
1087 - $(MKDIRHIER) $(PEGASUS_HOME)/repository_xml
1088 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="repositoryDir=$(PEGASUS_HOME)/repository_xml"
1089 $(SLEEP) 5
1090
1091 ####
1092 #### The following caused the cimserver to fail on startup
1093 ####
1094 #### $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableBinRepository=false repositoryDir=$(PEGASUS_HOME)/repository_xml"
1095
1096 ###########################
1097 ##
1098 ## TestXMLBuildRepo
1099 jim.wunderlich 1.34 ##
1100 TestXMLBuildRepo: FORCE
1101 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
1102 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
1103
1104
1105 ###########################
1106 ##
1107 ## TestXMLBuildRepoServ
1108 ##
1109 TestXMLBuildRepoServ: TestXMLStartServer
1110 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
1111 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
|
1112 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1113 jim.wunderlich 1.34
1114
1115 ###########################
1116 ##
1117 ## TestXMLRepo
1118 ##
|
1119 jim.wunderlich 1.40 TestXMLRepo: servertestsclean
|
1120 jim.wunderlich 1.35 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestXMLStartServer
|
1121 jim.wunderlich 1.34 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests REPOSITORY_NAME=repository_xml REPOSITORY_MODE=XML
|
1122 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1123 jim.wunderlich 1.34
1124
1125
1126
1127
1128
|
1129 jim.wunderlich 1.29 ##############################################################################
1130 ##
|
1131 jim.wunderlich 1.31 ## TestBinRepository rule is used to run the poststarttests suite on
|
1132 jim.wunderlich 1.33 ## the Binary Repository built using cimmofl
|
1133 jim.wunderlich 1.29 ##
|
1134 jim.wunderlich 1.31 ## TestBinRepositoryServer rule is used to run the poststarttests suite on
|
1135 jim.wunderlich 1.33 ## the Binary Repository built using cimmof
1136 ##
|
1137 kumpf 1.101 ## TestBinCmpRepository rule is used to run the poststarttest suite on
|
1138 jim.wunderlich 1.33 ## the Binry Compressed Repository built using cimmofl
|
1139 jim.wunderlich 1.29 ##
|
1140 jim.wunderlich 1.31
1141 ############################
|
1142 jim.wunderlich 1.29 ##
|
1143 jim.wunderlich 1.31 ## TestBinRepository
|
1144 jim.wunderlich 1.29 ##
|
1145 jim.wunderlich 1.33 ### bug 3011 disabled Binary Repository testing on LINUX_IA64 to allow
1146 ### the nightly tests to run
1147
|
1148 jim.wunderlich 1.31 TestBinRepository: TestBinClean TestBinBuildRepo TestBinRepo
|
1149 jim.wunderlich 1.33 @ $(ECHO) TestBinRepository +++++ passed all test
|
1150 jim.wunderlich 1.36
|
1151 jim.wunderlich 1.29
|
1152 jim.wunderlich 1.31 ############################
1153 ##
1154 ## TestBinRepositoryServer
1155 ##
1156 TestBinRepositoryServer: TestBinClean TestBinBuildRepoServ TestBinRepo
|
1157 jim.wunderlich 1.33 @ $(ECHO) TestBinRepositoryServer +++++ passed all test
1158
1159 ############################
1160 ##
1161 ## TestBinCmpRepository - run poststarttest on Compressed BIN Repository
1162 ##
1163 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY
|
1164 jim.wunderlich 1.34 TestBinCmpRepository: FORCE
|
1165 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ Repository compressed by default - nothing more to test.
1166 @ $(ECHO) TestBinCmpRepository +++++ passed all test
1167 else
1168
1169 ifdef PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST
1170
|
1171 jim.wunderlich 1.34 TestBinCmpRepository: TestBinClean TestCmpBuild TestBinBuildRepo TestBinRepo TestRegBuild
|
1172 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ passed all test
1173 else
|
1174 jim.wunderlich 1.34 TestBinCmpRepository: FORCE
|
1175 kumpf 1.101 @ $(ECHO) TestBinCmpRepository +++++ Not tested
|
1176 jim.wunderlich 1.33 @ $(ECHO) TestBinCmpRepository +++++ refer to readme.compressed_repository
|
1177 kumpf 1.101 @ $(ECHO) TestBinCmpRepository +++++ to enable: set PEGASUS_ENABLE_COMPRESSED_REPOSITORY_TEST=true
|
1178 jim.wunderlich 1.33 endif
1179 endif
1180
1181
|
1182 jim.wunderlich 1.31 ###########################
1183 ##
1184 ## TestBinClean
1185 ##
|
1186 jim.wunderlich 1.34 TestBinClean: FORCE
|
1187 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1188 jim.wunderlich 1.31 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryclean REPOSITORY_NAME=repository_bin
|
1189 jim.wunderlich 1.29
|
1190 jim.wunderlich 1.31
1191 ###########################
|
1192 jim.wunderlich 1.29 ##
|
1193 jim.wunderlich 1.31 ## TestBinStartServer
|
1194 jim.wunderlich 1.29 ##
|
1195 jim.wunderlich 1.34 TestBinStartServer: FORCE
|
1196 jim.wunderlich 1.30 $(MAKE) --directory=$(PEGASUS_ROOT)/src/Server -f Makefile install_run
|
1197 jim.wunderlich 1.31 - $(MKDIRHIER) $(PEGASUS_HOME)/repository_bin
1198 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableBinaryRepository=true repositoryDir=$(PEGASUS_HOME)/repository_bin"
|
1199 jim.wunderlich 1.29 $(SLEEP) 5
|
1200 jim.wunderlich 1.31
1201 ###########################
|
1202 jim.wunderlich 1.29 ##
|
1203 jim.wunderlich 1.31 ## TestBinBuildRepo
|
1204 jim.wunderlich 1.29 ##
|
1205 jim.wunderlich 1.34 TestBinBuildRepo: FORCE
|
1206 jim.wunderlich 1.29 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
1207 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
|
1208 jim.wunderlich 1.31
1209
1210 ###########################
1211 ##
1212 ## TestBinBuildRepoServ
1213 ##
1214 TestBinBuildRepoServ: TestBinStartServer
1215 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
1216 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepositoryServer REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
|
1217 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1218 jim.wunderlich 1.31
1219
1220 ###########################
1221 ##
1222 ## TestBinRepo
1223 ##
|
1224 kumpf 1.101 TestBinRepo: servertestsclean
|
1225 jim.wunderlich 1.35 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestBinStartServer
|
1226 jim.wunderlich 1.29 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile poststarttests REPOSITORY_NAME=repository_bin REPOSITORY_MODE=BIN
|
1227 kumpf 1.101 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1228 jim.wunderlich 1.29
1229
1230
|
1231 jim.wunderlich 1.34
1232 ############################
1233 ##
1234 ## TestCmpBuild - used to compile the repository for compression
1235 ##
1236 TestCmpBuild: FORCE
1237 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository clean
1238 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository depend PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1
1239 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1
1240
1241
1242 ############################
1243 ##
1244 ## TestRegBuild - used to compile the repository for no compression
1245 ##
1246 TestRegBuild: FORCE
1247 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository clean
|
1248 kumpf 1.101 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository depend
1249 @ $(MAKE) "-SC" $(ROOT)/src/Pegasus/Repository
|
1250 jim.wunderlich 1.34
|
1251 nag.boranna 1.27 ###############################################################################
|
1252 kumpf 1.1 ##
1253 ## Trace Configuration
1254 ##
|
1255 jim.wunderlich 1.43 ## Options: see usagetrace rule
1256 ##
1257 ###############################################################################
1258
1259 usagetrace: FORCE
1260 $(USAGE)
|
1261 jim.wunderlich 1.60 $(USAGE)"TestMakefile Trace Commands: "
1262 $(USAGE)" The cimserver must be running when using W=c which is the default for W"
|
1263 jim.wunderlich 1.43 $(USAGE)
|
1264 jim.wunderlich 1.60 $(USAGE)" traceon W=[current/planned(c,p): Enables all tracing."
1265 $(USAGE)" traceoff W=[current/planned(c,p): Disables all tracing."
1266 $(USAGE)" tracesettings: Displays all trace settings."
1267 $(USAGE)" tracecomp: Displays a trace componenets list."
1268 $(USAGE)" traceon-CL C=[comp] L=[level(1,2,3,4)] W=[current/planned(c,p): "
1269 $(USAGE)" Enables tracing on component C at trace level L."
1270 $(USAGE)
|
1271 kumpf 1.101 $(USAGE)" W defaults to c in the above commands where W can be specified"
|
1272 jim.wunderlich 1.43 $(USAGE)
|
1273 jim.wunderlich 1.60 $(USAGE)" Usage examples:"
1274 $(USAGE)" traceon turns on trace in current server config"
1275 $(USAGE)" traceon W=c turns on trace in current server config"
1276 $(USAGE)" traceon W=p turns on trace in planned server config"
1277 $(USAGE)" traceoff turns on trace in current server config"
1278 $(USAGE)" traceoff W=c turns on trace in current server config"
1279 $(USAGE)" traceoff W=p turns on trace in planned server config"
1280 $(USAGE)
1281 $(USAGE)" traceon-CL C=DiscardedData L=3 W=c"
1282 $(USAGE)" Turns on trace for DiscardedData at level 3 in current server config"
1283 $(USAGE)" traceon-CL C=DiscardedData L=3 W=p"
1284 $(USAGE)" Turns on trace for DiscardedData at level 3 in planned server config"
|
1285 jim.wunderlich 1.43 $(USAGE)
1286 $(USAGE)
1287
1288 traceon: FORCE
|
1289 kumpf 1.101 @ cimconfig -s traceComponents=ALL -$W
|
1290 jim.wunderlich 1.60 @ cimconfig -s traceLevel=3 -$W
1291 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
1292
|
1293 jim.wunderlich 1.43
1294 traceoff: FORCE
|
1295 jim.wunderlich 1.60 @ cimconfig -s traceComponents= -$W
1296 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
|
1297 jim.wunderlich 1.43
1298
1299 tracesettings: FORCE
1300 @ $(ECHO) " "
|
1301 jim.wunderlich 1.60 cimconfig -g traceComponents -c -p
|
1302 jim.wunderlich 1.43 @ $(ECHO) " "
|
1303 jim.wunderlich 1.60 cimconfig -g traceLevel -c -p
|
1304 jim.wunderlich 1.43 @ $(ECHO) " "
|
1305 jim.wunderlich 1.60 cimconfig -g traceFilePath -c -p
|
1306 jim.wunderlich 1.43 @ $(ECHO) " "
1307
1308 traceon-CL: FORCE
|
1309 jim.wunderlich 1.60 @ cimconfig -s traceComponents=$C -$W
1310 @ cimconfig -s traceLevel=$L -$W
1311 $(MAKE) -f $(ROOT)/TestMakefile tracesettings
|
1312 jim.wunderlich 1.43
1313 tracecomp: FORCE
1314 $(USAGE)
1315 $(USAGE)"Trace component list:"
1316 $(USAGE)
1317 $(USAGE)"Channel"
1318 $(USAGE)"XmlParser"
1319 $(USAGE)"XmlWriter"
1320 $(USAGE)"XmlReader"
1321 $(USAGE)"XmlIO"
1322 $(USAGE)"Http"
1323 $(USAGE)"CimData"
1324 $(USAGE)"ProvManager"
1325 $(USAGE)"Repository"
1326 $(USAGE)"Dispatcher"
1327 $(USAGE)"OsAbstraction"
1328 $(USAGE)"Config"
1329 $(USAGE)"IndDelivery"
1330 $(USAGE)"IndHandler"
1331 $(USAGE)"Authentication"
1332 $(USAGE)"Authorization"
1333 jim.wunderlich 1.43 $(USAGE)"UserManager"
1334 $(USAGE)"SubscriptionService"
1335 $(USAGE)"Registration"
1336 $(USAGE)"Shutdown"
1337 $(USAGE)"Server"
1338 $(USAGE)"IndicationService"
1339 $(USAGE)"IndicationServiceInternal"
1340 $(USAGE)"ConfigurationManager"
1341 $(USAGE)"MessageQueueService"
1342 $(USAGE)"ProviderManager"
1343 $(USAGE)"ObjectResolution"
1344 $(USAGE)"WQL"
1345 $(USAGE)"CQL"
1346 $(USAGE)"Thread"
1347 $(USAGE)"MetaDispatcher"
1348 $(USAGE)"IPC"
1349 $(USAGE)"IndicationHandlerService"
1350 $(USAGE)"CIMExportRequestDispatcher"
1351 $(USAGE)"Memory"
1352 $(USAGE)"SSL"
1353 $(USAGE)"ControlProvider"
1354 jim.wunderlich 1.43 $(USAGE)"AsyncOpNode"
1355 $(USAGE)"CIMOMHandle"
1356 $(USAGE)"L10N"
1357 $(USAGE)"ExportClient"
1358 $(USAGE)"Listener"
1359 $(USAGE)"DiscardedData"
1360 $(USAGE)"ProviderAgent"
1361 $(USAGE)
1362
1363 ###############################################################################
1364 ##
1365 ## Trace Configuration - Old rules being deprecated
1366 ##
|
1367 kumpf 1.1 ## Options:
1368 ## XMLTraceOn: Enables XML request and response tracing.
1369 ## ProviderLoadTraceOn: Enables Provider load tracing.
1370 ## XML+ProviderLoadTraceOn: Enables both XML request/response and Provider
1371 ## load tracing.
1372 ## AllTraceOn: Enables all tracing.
1373 ## AllTraceOff: Disables all tracing.
1374 ## list: Lists trace settings.
1375 ##
1376 ###############################################################################
1377
1378 XMLTraceOn:
1379 cimconfig -s traceComponents=XmlIO -c
1380 cimconfig -s traceLevel=3 -c
1381 cimconfig -g traceComponents
1382 cimconfig -g traceLevel
1383
1384 ProviderLoadTraceOn:
1385 cimconfig -s traceComponents=ProvManager,OsAbstraction
1386 cimconfig -s traceLevel=3 -c
1387 cimconfig -g traceComponents
1388 kumpf 1.1 cimconfig -g traceLevel
1389
1390 XML+ProviderLoadTraceOn:
1391 cimconfig -s traceComponents=XmlIO,ProvManager,OsAbstraction
1392 cimconfig -s traceLevel=3 -c
1393 cimconfig -g traceComponents
1394 cimconfig -g traceLevel
1395
|
1396 jim.wunderlich 1.43 AllTraceOn: traceon
1397
1398 AllTraceOff: traceoff
|
1399 kumpf 1.1
|
1400 jim.wunderlich 1.43 list: tracesettings
|
1401 kumpf 1.1
|
1402 jim.wunderlich 1.55 #########################################################################
1403 # standardtests
1404 #
1405 # More testing options...
1406 #
|
1407 kumpf 1.101 # The standard test seem to contain additional test that may not be able
|
1408 jim.wunderlich 1.55 # to run on all platforms so they have been grouped here for now rather than
1409 # being included in the serversuite rule.
1410 #
1411 # The test are:
1412 # TestCimmof
1413 # TestNoSecurity
1414 # TestLocalSecurity
1415 # TestRemoteSecurity
1416 # TestAuthorization
1417 #
1418 # NOTE: The TestsNoSecurity test is comprised of DisableSecurity and
1419 # TestNoSecurity.
1420 #
1421 # NOTE: The TestNoSecurity step runs the servertests which builds the
1422 # the repository that is then left in place for the remaining tests.
1423 # The cimof test must be before the TestNosecurity step as it removes
1424 # the repository builds a new one with cimmofl and another one with
|
1425 kumpf 1.101 # cimmof and then compares them.
|
1426 jim.wunderlich 1.55 #
|
1427 kumpf 1.101 # NOTE: The Authentication test is comprised of EnableAuthentication,
1428 # TestLocalSecurity and TestRemoteSecurity.
|
1429 jim.wunderlich 1.55 #
1430 # NOTE: The Authorization test is comprised of EnableAuthorization and
|
1431 kumpf 1.101 # TestAuthorization.
|
1432 jim.wunderlich 1.55 #
|
1433 kumpf 1.101 # NOTE: The EnableAuthentication and EnableAuthorization steps require
|
1434 jim.wunderlich 1.55 # root access. Pegasus doesn't currently have the infrastructure
1435 # in place to run the server as root and run the test as non-root.
1436 # Rather than run everything, server, tests, providers, clients etc.
1437 # as root many testers prefer to run the tests as non-root. Setting
|
1438 kumpf 1.101 # PEGASUS_DISABLE_PRIVILEGED_TESTS in the environment helps to
|
1439 jim.wunderlich 1.55 # facilitate that.
1440 #
|
1441 kumpf 1.1
|
1442 jim.wunderlich 1.40 standardtests: FORCE
|
1443 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i DisableSecurity
1444 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestCimmof
|
1445 kumpf 1.94 # $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestNoSecurity
1446 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository testrepository
|
1447 jim.wunderlich 1.55 ifndef PEGASUS_DISABLE_PRIVILEGED_TESTS
|
1448 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile EnableAuthentication
1449 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestLocalSecurity
1450 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestRemoteSecurity
1451 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile EnableAuthorization
1452 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile TestAuthorization
|
1453 jim.wunderlich 1.53 else
|
1454 jim.wunderlich 1.55 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping EnableAuthentication, TestLocalSecurity, and TestRemoteSecurity "
|
1455 jim.wunderlich 1.53 @ $(ECHO) "+++++ PEGASUS_DISABLE_PRIVILEGED_TESTS defined: Skipping EnableAuthorization and TestAuthorization "
1456 endif
|
1457 kumpf 1.94 # Reset the security options to the defaults
1458 cimconfig -u enableNamespaceAuthorization -p
1459 cimconfig -u enableAuthentication -p
|
1460 kumpf 1.93 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1461 jim.wunderlich 1.40 @ $(ECHO) "+++++ TestMakefile standardtests complete"
|
1462 kumpf 1.1
1463 TestNoSecurity:
|
1464 jim.wunderlich 1.56 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile servertests
|
1465 kumpf 1.24 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
|
1466 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1467 kumpf 1.1
1468 TestLocalSecurity:
|
1469 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1470 kumpf 1.1 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest -f Makefile poststarttests HOSTNAME= PORT= USER= PASSWORD= SECURITY_ENABLED=true
1471
1472 TestRemoteSecurity:
|
1473 jim.wunderlich 1.59 TestClient -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS) $(system):5988
1474 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/static -f Makefile poststarttests HOSTNAME=-h$(system) USER=-u$(PEGASUS_TEST_USER_ID) PASSWORD=-w$(PEGASUS_TEST_USER_PASS) SECURITY_ENABLED=true
|
1475 kumpf 1.1
1476 TestAuthorization:
|
1477 jim.wunderlich 1.59 TestPegClientDeleteNamespace -a -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS)
|
1478 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile RunTestClientLocal
|
1479 jim.wunderlich 1.59 TestClient -user $(PEGASUS_TEST_USER_ID) -password $(PEGASUS_TEST_USER_PASS) $(system):5988
1480 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/static -f Makefile poststarttests HOSTNAME=-h$(system) USER=-u$(PEGASUS_TEST_USER_ID) PASSWORD=-w$(PEGASUS_TEST_USER_PASS) SECURITY_ENABLED=true
|
1481 kumpf 1.1
1482 TestSubscriptions:
|
1483 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile DisableSecurity
|
1484 kumpf 1.1 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
1485 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile testrepository
|
1486 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
|
1487 david.dillard 1.15 $(MAKE) --directory=$(PEGASUS_ROOT)/test/wetest/cimv2/Subscription -f Makefile poststarttests
|
1488 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
|
1489 kumpf 1.1
1490 TestCimmof:
|
1491 kumpf 1.95 # Build the repository with cimmofl and cimmof and compare them.
1492 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1493 -@$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-save
1494 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmofl
1495 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmof
1496 @$(ECHO) $(CIM_SCHEMA_DIR)
1497 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repository
1498 @$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-cimmofl
1499 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstart
1500 @$(ECHO) $(CIM_SCHEMA_DIR)
1501 $(MAKE) --directory=$(PEGASUS_ROOT) -f Makefile repositoryServer
1502 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile cimstop
1503 @$(MOVE) $(REPOSITORY_DIR)/repository $(REPOSITORY_DIR)/repository-cimmof
1504 -@$(MOVE) $(REPOSITORY_DIR)/repository-save $(REPOSITORY_DIR)/repository
1505 TestCompareRepositories $(REPOSITORY_DIR)/repository-cimmofl $(REPOSITORY_DIR)/repository-cimmof
1506 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmofl
1507 @$(RMREPOSITORY) $(REPOSITORY_DIR)/repository-cimmof
|
1508 kumpf 1.1
1509 RunTestClientLocal:
1510 TestClient -local
1511
1512 DisableSecurity:
|
1513 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1514 kumpf 1.1 cimconfig -s enableAuthentication=false -p
1515 cimconfig -s enableNamespaceAuthorization=false -p
1516
|
1517 jim.wunderlich 1.61 EnableUsers:
1518 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1519 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1520 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
1521
|
1522 kumpf 1.1 EnableAuthentication:
|
1523 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1524 kumpf 1.1 cimconfig -s enableAuthentication=true -p
|
1525 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1526 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile ConfigureUsers
|
1527 kumpf 1.1
1528 EnableAuthorization:
|
1529 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
|
1530 kumpf 1.10 cimconfig -s enableNamespaceAuthorization=true -p
|
1531 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithoutSSL
1532 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i ConfigureAuthorizations
|
1533 kumpf 1.1
1534 EnableSSL:
|
1535 kumpf 1.21 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstop
1536 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile startcimWithSSL
|
1537 kumpf 1.1
|
1538 jim.wunderlich 1.61 #
1539 # ConfigureUsers
1540 #
1541 # The server must be running prior to invoking this rule
1542 #
|
1543 kumpf 1.1 ConfigureUsers:
1544 ifndef PEGASUS_PAM_AUTHENTICATION
|
1545 jim.wunderlich 1.62 -cimuser -l
|
1546 jim.wunderlich 1.61 -cimuser -a -u $(PEGASUS_TEST_USER_ID) -w $(PEGASUS_TEST_USER_PASS)
|
1547 kumpf 1.1 endif
1548
|
1549 jim.wunderlich 1.61 #
1550 # ConfigureAuthorizations rule
1551 #
1552 # The server must be running prior to invoking this rule
1553 #
|
1554 kumpf 1.1 ConfigureAuthorizations:
|
1555 jim.wunderlich 1.59 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/cimv2 -R -W
1556 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/cimv2 -R -W
1557 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/PG_Internal -R -W
|
1558 anusha.kandepu 1.109 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n $(PEGASUS_INTEROP_NAMESPACE) -R -W
|
1559 jim.wunderlich 1.59 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/benchmark -R -W
1560 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/sampleprovider -R -W
1561 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/static -R -W
1562 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/SampleProvider -R -W
1563 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root -R -W
|
1564 sushma.fernandes 1.80 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/MCCAtest/A -R -W
1565 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n root/MCCAtest/B -R -W
|
1566 kumpf 1.65 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test/TestProvider -R -W
|
1567 jim.wunderlich 1.59 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1 -R -W
1568 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test2 -R -W
1569 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test3 -R -W
1570 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test4 -R -W
1571 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test5 -R -W
1572 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test6 -R -W
1573 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2 -R -W
1574 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3 -R -W
1575 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4 -R -W
1576 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4/test5 -R -W
1577 cimauth -a -u $(PEGASUS_TEST_USER_ID) -n test1/test2/test3/test4/test5/test6 -R -W
|
1578 kumpf 1.82 ifeq ($(PEGASUS_ENABLE_PRIVILEGE_SEPARATION),true)
|
1579 kumpf 1.83 cimauth -a -u $(PEGASUS_CIMSERVERMAIN_USER) -n root/cimv2 -R -W
|
1580 kumpf 1.82 endif
|
1581 kumpf 1.1
|
1582 jim.wunderlich 1.41 startcimWithoutSSL: FORCE
1583 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart
|
1584 kumpf 1.19 $(SLEEP) 5
|
1585 kumpf 1.1
|
1586 jim.wunderlich 1.41 startcimWithSSL: FORCE
1587 $(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile -i cimstart CIMSERVER_CONFIG_OPTIONS="enableHttpConnection=false enableHttpsConnection=true"
|
1588 kumpf 1.19 $(SLEEP) 5
|
1589 j.alex 1.66
|
1590 denise.eckstein 1.97 ###############################################################################
1591 ##
1592 ## check_for_cores - used to search for core files in the build environment.
1593 ##
1594 ## This option will search (1) each source directory, (2) the PEGASUS_CORE_DIR
1595 ## if it is defined and (3) the PEGASUS_TMP directory.
1596 ##
1597 ###############################################################################
1598 CORE_FILE_LIST = $(PEGASUS_HOME)/CoreFileList
1599
1600 check_core_search_results:
1601 ifneq ($(wildcard $(CORE_FILE_LIST)), )
1602 @$(ECHO) "*** One or more core files found. ***"
1603 @$(CAT) $(CORE_FILE_LIST)
1604 @exit 1
1605 endif
1606
1607 ifdef PEGASUS_CORE_DIR
1608 CORE_FILES_IN_CORE_DIR = \
1609 $(wildcard $(PEGASUS_CORE_DIR)/$(PLATFORM_CORE_PATTERN))
1610 endif
1611 denise.eckstein 1.97 ifdef PEGASUS_TMP
1612 CORE_FILES_IN_TMP_DIR = \
1613 $(wildcard $(PEGASUS_TMP)/$(PLATFORM_CORE_PATTERN))
1614 endif
1615
1616 generate_core_file_list:
1617 @$(RM) $(CORE_FILE_LIST)
1618 @$(MAKE) -s directory=$(PEGASUS_ROOT) general OPTION=CORE_SEARCH \
|
1619 kumpf 1.101 CORE_FILE_LIST=$(CORE_FILE_LIST)
|
1620 denise.eckstein 1.97 ifdef PEGASUS_CORE_DIR
1621 ifneq ($(CORE_FILES_IN_CORE_DIR), )
1622 @$(ECHO) $(CORE_FILES_IN_CORE_DIR) >> $(CORE_FILE_LIST)
1623 endif
1624 endif
1625 ifdef PEGASUS_TMP
1626 ifneq ($(CORE_FILES_IN_TMP_DIR), )
1627 @$(ECHO) $(CORE_FILES_IN_TMP_DIR) >> $(CORE_FILE_LIST)
1628 endif
1629 endif
1630
1631 check_for_cores:
1632 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
|
1633 kumpf 1.101 generate_core_file_list
|
1634 denise.eckstein 1.97 @$(MAKE) --directory=$(PEGASUS_ROOT) -f TestMakefile \
|
1635 kumpf 1.101 check_core_search_results
|
1636 kumpf 1.102
1637 ###############################################################################
1638 ##
1639 ## option_summary - used to generate a concise list of build options for use in
1640 ## a nightly build status report. This is not intended to be a complete list,
1641 ## so it is likely that some options are omitted. New options may be added
1642 ## here as needs dictate.
1643 ##
1644 ###############################################################################
1645
1646 OPTION_SUMMARY =
1647 ifeq ($(PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER),true)
1648 OPTION_SUMMARY += "+CMPI"
1649 endif
1650 ifeq ($(PEGASUS_ENABLE_CQL),true)
1651 OPTION_SUMMARY += "+CQL"
1652 endif
1653 ifeq ($(PEGASUS_HAS_ICU),true)
1654 OPTION_SUMMARY += "+ICU"
1655 endif
1656 ifeq ($(PEGASUS_ENABLE_IPV6),true)
1657 kumpf 1.102 OPTION_SUMMARY += "+IPv6"
1658 endif
1659 ifeq ($(PEGASUS_ENABLE_JMPI_PROVIDER_MANAGER),true)
1660 OPTION_SUMMARY += "+JMPI"
1661 endif
1662 ifeq ($(PEGASUS_ENABLE_PRIVILEGE_SEPARATION),true)
1663 OPTION_SUMMARY += "+PrivSep"
1664 endif
1665 ifdef PEGASUS_ENABLE_EXECQUERY
1666 OPTION_SUMMARY += "+Query"
1667 endif
1668 ifdef PEGASUS_ENABLE_REMOTE_CMPI
1669 OPTION_SUMMARY += "+RCMPI"
1670 endif
1671 ifeq ($(PEGASUS_ENABLE_SLP),true)
1672 OPTION_SUMMARY += "+SLP"
1673 endif
1674 ifeq ($(PEGASUS_USE_SQLITE_REPOSITORY),true)
1675 OPTION_SUMMARY += "+SQLite"
1676 endif
1677 ifdef PEGASUS_HAS_SSL
1678 kumpf 1.102 OPTION_SUMMARY += "+SSL"
1679 endif
1680 ifeq ($(PEGASUS_ENABLE_PROTOCOL_WSMAN),true)
1681 OPTION_SUMMARY += "+WSMan"
1682 endif
1683
1684 option_summary:
1685 @$(ECHO) "$(OPTION_SUMMARY)"
|
Return to
TestMakefile
CVS log
Up to [Pegasus] / pegasus