1 a.dunfey 1.1 // ===================================================================
2 // Title: Physical Connectors
3 // $State: Preliminary $
4 // $Date: 2005/01/05 00:54:00 $
5 // $Source: /home/dmtf2/dotorg/var/cvs/repositories/dev/Schema/MOF/Physical_Connector.mof,v $
6 // $Revision: 1.5 $
7 // ===================================================================
8 //#pragma inLine ("Includes/copyright.inc")
9 // Copyright 1998-2005 Distributed Management Task Force, Inc. (DMTF).
10 // All rights reserved.
11 // DMTF is a not-for-profit association of industry members dedicated
12 // to promoting enterprise and systems management and interoperability.
13 // DMTF specifications and documents may be reproduced for uses
14 // consistent with this purpose by members and non-members,
15 // provided that correct attribution is given.
16 // As DMTF specifications may be revised from time to time,
17 // the particular version and release date should always be noted.
18 //
19 // Implementation of certain elements of this standard or proposed
20 // standard may be subject to third party patent rights, including
21 // provisional patent rights (herein "patent rights"). DMTF makes
22 a.dunfey 1.1 // no representations to users of the standard as to the existence
23 // of such rights, and is not responsible to recognize, disclose, or
24 // identify any or all such third party patent right, owners or
25 // claimants, nor for any incomplete or inaccurate identification or
26 // disclosure of such rights, owners or claimants. DMTF shall have no
27 // liability to any party, in any manner or circumstance, under any
28 // legal theory whatsoever, for failure to recognize, disclose, or
29 // identify any such third party patent rights, or for such party's
30 // reliance on the standard or incorporation thereof in its product,
31 // protocols or testing procedures. DMTF shall have no liability to
32 // any party implementing such standard, whether such implementation
33 // is foreseeable or not, nor to any patent owner or claimant, and shall
34 // have no liability or responsibility for costs or losses incurred if
35 // a standard is withdrawn or modified after publication, and shall be
36 // indemnified and held harmless by any party implementing the
37 // standard from any and all claims of infringement by a patent owner
38 // for such implementations.
39 //
40 // For information about patents held by third-parties which have
41 // notified the DMTF that, in their opinion, such patent may relate to
42 // or impact implementations of DMTF standards, visit
43 a.dunfey 1.1 // http://www.dmtf.org/about/policies/disclosures.php.
44 //#pragma inLine
45 // ===================================================================
46 // Description: The Physical Model defines modeling concepts related
47 // to actual boxes and packaging. This file defines the
48 // concepts related to connectors.
49 //
50 // The object classes below are listed in an order that
51 // avoids forward references. Required objects, defined
52 // by other working groups, are omitted.
53 // ==================================================================
54 // Change Log for v2.9 Preliminary
55 // CR1324 - Add PCI-E link width information (Slot.MaxLinkWidth)
56 //
57 // Change Log for v2.8
58 // CR1093 - Add text regarding PhysicalConnector class defintion
59 //
60 // Change Log for v2.7
61 // CR623 - Fix the DMI mapping string to include the attribute number
62 // PhysicalConnector.ConnectorType and .OtherTypeDescription.
63 // CR676 - Deprecate Slot.Powered
64 a.dunfey 1.1 // CR877 - Add AGP8X enumeration to PhysicalConnector.ConnectorType
65 // ==================================================================
66
67 #pragma locale ("en_US")
68
69 // ==================================================================
70 // CIM_PhysicalConnector --- Is located in Physicalxx_Package.mof
71 // to avoid the ConnectorPower method in CIM_Card having a
72 // forward reference.
73 // ==================================================================
74
75
76
77 // ===================================================================
78 // ConnectedTo
79 // ===================================================================
80 [Association, Version ( "2.6.0" ), Description (
81 "The ConnectedTo association indicates that two or more "
82 "PhysicalConnectors are connected together.")]
83 class CIM_ConnectedTo : CIM_Dependency {
84
85 a.dunfey 1.1 [Override ( "Antecedent" ), Description (
86 "The Antecedent represents a PhysicalConnector that serves "
87 "as one end of the connection.")]
88 CIM_PhysicalConnector REF Antecedent;
89
90 [Override ( "Dependent" ), Description (
91 "The Dependent represents another PhysicalConnector that "
92 "serves as the other end of the connection.")]
93 CIM_PhysicalConnector REF Dependent;
94 };
95
96
97 // ===================================================================
98 // Slot
99 // ===================================================================
100 [Version ( "2.8.1000" ), Description (
101 "The Slot class represents Connectors into which Packages are "
102 "inserted. For example, a PhysicalPackage that is a DiskDrive "
103 "may be inserted into an SCA 'Slot'. As another example, a Card "
104 "(subclass of PhysicalPackage) may be inserted into a 16-, 32-, "
105 "or 64-bit expansion 'Slot' on a HostingBoard. PCI or PCMCIA "
106 a.dunfey 1.1 "Type III Slots are examples of the latter.")]
107 class CIM_Slot : CIM_PhysicalConnector {
108
109 [Override ( "ConnectorType" ),
110 MappingStrings { "MIF.DMTF|System Slot|005.2" }]
111 uint16 ConnectorType[];
112
113 [Override ( "PoweredOn" ),
114 MappingStrings { "MIF.DMTF|System Slot|005.13" }]
115 boolean PoweredOn;
116
117 [Description (
118 "Boolean indicating whether the Slot supports hot-plug of "
119 "adapter Cards.")]
120 boolean SupportsHotPlug;
121
122 [Description (
123 "Maximum height of an adapter Card that can be inserted into "
124 "the Slot, in inches."),
125 Units ( "Inches" )]
126 real32 HeightAllowed;
127 a.dunfey 1.1
128 [Description (
129 "Maximum length of an adapter Card that can be inserted into "
130 "the Slot, in inches."),
131 Units ( "Inches" )]
132 real32 LengthAllowed;
133
134 [Description (
135 "Maximum bus width of adapter Cards that can be inserted "
136 "into this Slot, in bits. If the value is 'unknown', enter "
137 "0. If the value is other than 8, 16, 32, 64 or 128, enter "
138 "1."),
139 Units ( "Bits" ),
140 ValueMap { "0", "1", "8", "16", "32", "64", "128" },
141 MappingStrings { "MIF.DMTF|System Slot|005.3" }]
142 uint16 MaxDataWidth;
143
144 [Description (
145 "An array of enumerated integers indicating the Vcc voltage "
146 "supported by this Slot."),
147 ValueMap { "0", "1", "2", "3" },
148 a.dunfey 1.1 Values { "Unknown", "Other", "3.3V", "5V" },
149 MappingStrings { "MIF.DMTF|System Slot|005.9" }]
150 uint16 VccMixedVoltageSupport[];
151
152 [Description (
153 "An array of enumerated integers indicating the Vpp voltage "
154 "supported by this Slot."),
155 ValueMap { "0", "1", "2", "3", "4" },
156 Values { "Unknown", "Other", "3.3V", "5V", "12V" },
157 MappingStrings { "MIF.DMTF|System Slot|005.10" }]
158 uint16 VppMixedVoltageSupport[];
159
160 [Description (
161 "Maximum thermal dissipation of the Slot in milliwatts."),
162 Units ( "MilliWatts" ),
163 MappingStrings { "MIF.DMTF|System Slot|005.11" }]
164 uint32 ThermalRating;
165
166 [Description (
167 "Boolean indicating that this Slot is physically unique and "
168 "may hold special types of hardware, e.g. a graphics "
169 a.dunfey 1.1 "processor slot. If set to TRUE, then the property, Special "
170 "PurposeDescription (a string), should specify the nature of "
171 "the uniqueness or purpose of the Slot."),
172 ModelCorrespondence { "CIM_Slot.PurposeDescription" }]
173 boolean SpecialPurpose;
174
175 [Description (
176 "A free-form string describing that this Slot is physically "
177 "unique and may hold special types of hardware. This "
178 "property only has meaning when the corresponding boolean "
179 "property, SpecialPurpose, is set to TRUE."),
180 ModelCorrespondence { "CIM_Slot.SpecialPurpose" }]
181 string PurposeDescription;
182
183 [Description (
184 "The Number property indicates the physical slot number, "
185 "which can be used as an index into a system slot table, "
186 "whether or not that slot is physically occupied."),
187 MappingStrings { "MIF.DMTF|System Slot|005.1" }]
188 uint16 Number;
189
190 a.dunfey 1.1 [Deprecated { "CIM_PhysicalElement.PoweredOn" }, Description (
191 "A boolean indicating whether the Slot is currently powered "
192 "(TRUE) or not (FALSE)."),
193 MappingStrings { "MIF.DMTF|System Slot|005.13" }]
194 boolean Powered;
195
196 [Description (
197 "A boolean indicating whether the switch state of the Slot "
198 "is currently open (TRUE) or closed (FALSE). This switch "
199 "state determines whether the contents of the Slot can be "
200 "hot-plugged."),
201 MappingStrings { "MIF.DMTF|System Slot|005.15" }]
202 boolean OpenSwitch;
203
204 [Experimental, Description (
205 "Maximum link width of a switching bus type, such as "
206 "Infiniband and PCI Express. The width is expressed in "
207 "number of communication lines, or lanes, between port and "
208 "devices. This property dictates the maximum link width, in "
209 "lanes, of adapter Cards that can be inserted into this "
210 "Slot. If the value is 'unknown', enter 0."),
211 a.dunfey 1.1 ValueMap { "0", "2", "3", "4", "5", "6", "7", "8", "9.." },
212 Values { "Unknown", "x1","x2","x4","x8","x12","x16","x32",
213 "DMTF Reserved" }]
214 uint16 MaxLinkWidth;
215 };
216
217
218 // ==================================================================
219 // SlotInSlot
220 // ==================================================================
221 [Association, Version ( "2.6.0" ), Description (
222 "Slots are special types of Connectors into which adapter Cards "
223 "are typically inserted. The SlotInSlot relationship represents "
224 "the ability of a special adapter to extend the existing Slot "
225 "structure to enable otherwise incompatible Cards to be plugged "
226 "into a Frame or Hosting Board. The adapter effectively creates "
227 "a new Slot and can be thought of (conceptually) as a Slot in a "
228 "Slot. This enables Cards that would otherwise be physically "
229 "and/or electrically incompatible with the existing Slots to be "
230 "supported, by interfacing to the Slot provided by the adapter. "
231 "This has many practical uses. For example, networking boards "
232 a.dunfey 1.1 "are very expensive. As new hardware becomes available, Chassis "
233 "and even Card configurations change. To protect the investment "
234 "of their customers, networking vendors will manufacture "
235 "special adapters that enable old Cards to fit into new Chassis "
236 "or Hosting Boards and/or new Cards to fit into old. This is "
237 "done using a special adapter that fits over one or more "
238 "existing Slots and presents a new Slot into which the Card can "
239 "plug.")]
240 class CIM_SlotInSlot : CIM_ConnectedTo {
241
242 [Override ( "Antecedent" ), Description (
243 "The Antecedent represents the existing Slot(s) of the "
244 "HostingBoard, or Frame that are being adapted to "
245 "accommodate a Card that would otherwise not be physically "
246 "and/or electrically compatible with it.")]
247 CIM_Slot REF Antecedent;
248
249 [Override ( "Dependent" ), Max ( 1 ), Description (
250 "The new Slot provided by the adapter board.")]
251 CIM_Slot REF Dependent;
252 };
253 a.dunfey 1.1
254
255 // ==================================================================
256 // AdjacentSlots
257 // ==================================================================
258 [Association, Version ( "2.6.0" ), Description (
259 "AdjacentSlots describes the layout of Slots on a HostingBoard "
260 "or adapter Card. Information like the distance between the "
261 "Slots and whether they are 'shared' (if one is populated, then "
262 "the other Slot can not be used), is conveyed as properties of "
263 "the association.")]
264 class CIM_AdjacentSlots {
265
266 [Key, Description (
267 "One of the adjacent Slots.")]
268 CIM_Slot REF SlotA;
269
270 [Key, Description (
271 "The 'other' adjacent Slot.")]
272 CIM_Slot REF SlotB;
273
274 a.dunfey 1.1 [Description (
275 "The distance, in inches, between adjacent Slots."),
276 Units ( "Inches" )]
277 real32 DistanceBetweenSlots;
278
279 [Description (
280 "Slots can be located in close proximity on Hosting Boards "
281 "or other Cards, such that if one of these Slots is "
282 "populated by an adapter Card, the other Slot must be left "
283 "empty. This relationship is indicated by the SharedSlots "
284 "boolean set to TRUE.")]
285 boolean SharedSlots;
286 };
287
288 // ==================================================================
289 // PackageInConnector
290 // ==================================================================
291 [Association, Version ( "2.6.0" ), Description (
292 "Adapter cards and other 'packaging' are plugged into System "
293 "Connectors for power and/or to transfer data. This "
294 "relationship is defined by PackageInConnector. For example, it "
295 a.dunfey 1.1 "would be used to describe the insertion of a daughtercard onto "
296 "another Card. Various subclasses of PackageInConnector are "
297 "also defined. PackageInSlot and its subclass, CardInSlot, are "
298 "two examples of subclasses.")]
299 class CIM_PackageInConnector : CIM_Dependency {
300
301 [Override ( "Antecedent" ), Description (
302 "The Connector into which the Package is inserted.")]
303 CIM_PhysicalConnector REF Antecedent;
304
305 [Override ( "Dependent" ), Max ( 1 ), Description (
306 "The Package in the Connector.")]
307 CIM_PhysicalPackage REF Dependent;
308 };
309
310
311 // ==================================================================
312 // PackageInSlot
313 // ==================================================================
314 [Association, Version ( "2.6.0" ), Description (
315 "Complex networking devices often are Chassis-based. These "
316 a.dunfey 1.1 "Chassis allow for enhancement and/or augmentation of their "
317 "base functionality by accepting additional Chassis devices, "
318 "similar to accepting functionality in the form of adding "
319 "Cards. This association models this capability.")]
320 class CIM_PackageInSlot : CIM_PackageInConnector {
321
322 [Override ( "Antecedent" ), Description (
323 "The Slot into which the PhysicalPackage is inserted.")]
324 CIM_Slot REF Antecedent;
325
326 [Override ( "Dependent" ), Max ( 1 ), Description (
327 "The Package in the Slot.")]
328 CIM_PhysicalPackage REF Dependent;
329 };
330
331
332 // ==================================================================
333 // CardInSlot
334 // ==================================================================
335 [Association, Version ( "2.6.0" ), Description (
336 "Slots are special types of Connectors into which adapter Cards "
337 a.dunfey 1.1 "are inserted. This relationship of a Card in a Slot is made "
338 "explicit using the CardInSlot association."),
339 MappingStrings { "MIF.DMTF|System Slot|005.4" }]
340 class CIM_CardInSlot : CIM_PackageInSlot {
341
342 [Override ( "Antecedent" ), Description (
343 "The Slot into which the Card is inserted.")]
344 CIM_Slot REF Antecedent;
345
346 [Override ( "Dependent" ), Max ( 1 ), Description (
347 "The Card in the Slot.")]
348 CIM_Card REF Dependent;
349 };
350
351
352 // ==================================================================
353 // ConnectorOnPackage
354 // ==================================================================
355 [Association, Aggregation, Version ( "2.6.0" ), Description (
356 "PhysicalPackages contain Connectors as well as other "
357 "PhysicalElements. The ConnectorOnPackage association makes "
358 a.dunfey 1.1 "explicit the containment relationship between Connectors and "
359 "Packages.")]
360 class CIM_ConnectorOnPackage : CIM_Container {
361
362 [Aggregate, Override ( "GroupComponent" ), Max ( 1 ),
363 Description (
364 "The PhysicalPackage that has a Connector.")]
365 CIM_PhysicalPackage REF GroupComponent;
366
367 [Override ( "PartComponent" ), Description (
368 "The PhysicalConnector.")]
369 CIM_PhysicalConnector REF PartComponent;
370 };
371
372
373 // ===================================================================
374 // end of file
375 // ===================================================================
|
Return to
Physical_Connector.mof
CVS log
Up to [Pegasus] / pegasus / Schemas / CIMPrelim291