1 karl 1.1 // ===================================================================
2 // Title: Base Metrics
3 // $State: Preliminary $
4 // $Date: 2004/07/02 22:50:19 $
5 // $Source: /home/dmtf2/dotorg/var/cvs/repositories/dev/Schema/MOF/Metrics_BaseMetric.mof,v $
6 // $Revision: 1.4 $
7 // ===================================================================
8 //#pragma inLine ("Includes/copyright.inc")
9 // Copyright 1998-2004 Distributed Management Task Force, Inc. (DMTF).
10 // All rights reserved.
11 // DMTF is a not-for-profit association of industry members dedicated
12 // to promoting enterprise and systems management and interoperability.
13 // DMTF specifications and documents may be reproduced for uses
14 // consistent with this purpose by members and non-members,
15 // provided that correct attribution is given.
16 // As DMTF specifications may be revised from time to time,
17 // the particular version and release date should always be noted.
18 //
19 // Implementation of certain elements of this standard or proposed
20 // standard may be subject to third party patent rights, including
21 // provisional patent rights (herein "patent rights"). DMTF makes
22 karl 1.1 // no representations to users of the standard as to the existence
23 // of such rights, and is not responsible to recognize, disclose, or
24 // identify any or all such third party patent right, owners or
25 // claimants, nor for any incomplete or inaccurate identification or
26 // disclosure of such rights, owners or claimants. DMTF shall have no
27 // liability to any party, in any manner or circumstance, under any
28 // legal theory whatsoever, for failure to recognize, disclose, or
29 // identify any such third party patent rights, or for such party's
30 // reliance on the standard or incorporation thereof in its product,
31 // protocols or testing procedures. DMTF shall have no liability to
32 // any party implementing such standard, whether such implementation
33 // is foreseeable or not, nor to any patent owner or claimant, and shall
34 // have no liability or responsibility for costs or losses incurred if
35 // a standard is withdrawn or modified after publication, and shall be
36 // indemnified and held harmless by any party implementing the
37 // standard from any and all claims of infringement by a patent owner
38 // for such implementations.
39 //
40 // For information about patents held by third-parties which have
41 // notified the DMTF that, in their opinion, such patent may relate to
42 // or impact implementations of DMTF standards, visit
43 karl 1.1 // http://www.dmtf.org/about/policies/disclosures.php.
44 //#pragma inLine
45 // ===================================================================
46 // Description:
47 // Additions to the V2.6 Metrics MOF to support a more generic
48 // approach.
49 //
50 // CIM users often desire metric objects that model designers have
51 // not
52 // provided. Furthermore, such needs vary from one management
53 // philosophy
54 // to another. Rather than fill more and more CIM models with
55 // standardized objects, the Metrics model supports externally
56 // defined
57 // expressions of existing objects, such as properties of
58 // CIM_StatisticalData and its subclasses. In addition, the
59 // classes described in this file enable users to define their own
60 // metrics at runtime (rather than at provider implementation time).
61 // A newly defined metric (aka CIM_BaseMetricDefinition) may be
62 // given a value by instantiating CIM_BaseMetricValue.
63 // Both CIM_BaseMetricDefinitions and CIM_BaseMetricValues may be
64 karl 1.1 // associated with a ManagedElement.
65 // ==================================================================
66 // CIM 2.9 (Preliminary)
67 // CR1296 - Add meta data properties to CIM_BaseMetricDefinition
68 // that describe the Metric type and add
69 // ModelCorrespondence to BaseMetricValue
70 // CIM 2.8 (Final) - None
71 // CIM 2.8 (Preliminary) - None
72 //
73 // CIM 2.7.0 (Preliminary) 5 June 2002
74 // CR820 - Defined Base Metrics Classes and associations
75 // CR851 - Change the Description of BaseMetricValue.Duration
76 // to define the timestamp as the end of the duration
77 // CIM 2.7.0 (Final) 17 March 2003
78 // CR987 - Remove experimental qualifier from:
79 // -CIM_BaseMetricDefinition
80 // -CIM_BaseMetricValue
81 // -CIM_MetricInstance
82 // -CIM_MetricDefForME
83 // -CIM_MetricForME
84 // ==================================================================
85 karl 1.1
86 #pragma Locale ("en_US")
87
88
89 // ==================================================================
90 // BaseMetricDefinition
91 // ==================================================================
92 [Version ( "2.8.1000" ), Description (
93 "CIM_BaseMetricDefinition represents the definitional aspects "
94 "of a metric, i.e., a definition template containing meta data "
95 "about a new metric. Since CIM_BaseMetricDefinition does not "
96 "capture metric instance information, it does not contain the "
97 "value of the metric. The associated class CIM_BaseMetricValue "
98 "holds the metric value and encapsulates its runtime behavior. "
99 "The purpose of CIM_BaseMetricDefinition is to provide a "
100 "convenient mechanism for introducing a new metric definition "
101 "at runtime and capturing its instance values in a separate "
102 "class. This mechanism is targeted specifically at CIM users "
103 "who would like to enhance existing CIM schemas by introducing "
104 "domain-specific metrics that are not captured in the existing "
105 "CIM schemas. In addition, vendors of managed resources may "
106 karl 1.1 "make use of this mechanism if a small subset of a potentially "
107 "large and heterogeneous amount of performance-related data "
108 "needs to be exposed, based on the context in which the data is "
109 "captured. Additional meta data for a metric can be provided by "
110 "subclassing from CIM_BaseMetricDefinition. The "
111 "CIM_BaseMetricDefinition should be associated with the "
112 "CIM_ManagedElement(s) to which it applies.")]
113 class CIM_BaseMetricDefinition : CIM_ManagedElement {
114
115 [Key, Description (
116 "A string that uniquely identifies the metric definition. "
117 "The use of OSF UUID/GUIDs is recommended.")]
118 string Id;
119
120 [Description (
121 "The name of the metric. This name does not have to be "
122 "unique, but should be descriptive and may contain blanks.")]
123 string Name;
124
125 [Description (
126 "The data type of the metric. For example, \"boolean\" "
127 karl 1.1 "(value=1) or \"datetime\" (=3) may be specified. These "
128 "types represent the datatypes defined for CIM."),
129 ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10",
130 "11", "12", "13", "14" },
131 Values { "boolean", "char16", "datetime", "real32", "real64",
132 "sint16", "sint32", "sint64", "sint8", "string", "uint16",
133 "uint32", "uint64", "uint8" }]
134 uint16 DataType;
135
136 [Description (
137 "An enumerated value that describes the characteristics of "
138 "the metric, for purposes of performing calculations. The "
139 "property can take one of the following values: \n"
140 "1=\"Non-calculable\" -> a string. Arithmetic makes no "
141 "sense. \n"
142 "2=\"Summable\" -> It is reasonable to sum this value over "
143 "many instances of e.g., UnitOfWork, such as the number of "
144 "files processed in a backup job. For example, if each "
145 "backup job is a UnitOfWork, and each job backs up 27,000 "
146 "files on average, then it makes sense to say that 100 "
147 "backup jobs processed 2,700,000 files. \n"
148 karl 1.1 "3=\"Non-summable\" -> It does not make sense to sum this "
149 "value over many instances of UnitOfWork. An example would "
150 "be a metric that measures the queue length when a job "
151 "arrives at a server. If each job is a UnitOfWork, and the "
152 "average queue length when each job arrives is 33, it does "
153 "not make sense to say that the queue length for 100 jobs is "
154 "3300. It does make sense to say that the mean is 33."),
155 ValueMap { "1", "2", "3" },
156 Values { "Non-calculable", "Summable", "Non-summable" }]
157 uint16 Calculable;
158
159 [Description (
160 "Identifies the specific units of a value. Examples are "
161 "Bytes, Packets, Jobs, Files, Milliseconds, and Amps.")]
162 string Units;
163
164 [Description (
165 "Defines one or more strings that can be used to refine "
166 "(break down) queries against the BaseMetricValues along a "
167 "certain dimension. An example is a transaction name, "
168 "allowing the break down of the total value for all "
169 karl 1.1 "transactions into a set of values, one for each transaction "
170 "name. Other examples might be application system or user "
171 "group name. The strings are free format and should be "
172 "meaningful to the end users of the metric data. The strings "
173 "indicate which break down dimensions are supported for this "
174 "metric definition, by the underlying instrumentation.")]
175 string BreakdownDimensions[];
176
177 [Experimental, Description (
178 "IsContinuous indicates whether or not the metric value is "
179 "continuous or scalar. Performance metrics are an example of "
180 "a linear metric. Examples of non-linear metrics include "
181 "error codes or operational states. Continuous metrics can "
182 "be compared using the \"greater than\" relation.")]
183 boolean IsContinuous;
184
185 [Experimental, Description (
186 "ChangeType indicates how the metric value changes, in the "
187 "form of typical combinations of finer grain attributes such "
188 "as direction change, minimum and maximum values, and "
189 "wrapping semantics. \n"
190 karl 1.1 "0=\"Unknown\": The metric designer did not qualify the "
191 "ChangeType. \n"
192 "2=\"N/A\": If the \"IsContinuous\" property is \"false\", "
193 "ChangeType does not make sense and MUST be is set to "
194 "\"N/A\". \n"
195 "3=\"Counter\": The metric is a counter metric. These have "
196 "non-negative integer values which increase monotonically "
197 "until reaching the maximum representable number and then "
198 "wrap around and start increasing from 0. Such counters, "
199 "also known as rollover counters, can be used for instance "
200 "to count the number of network errors or the number of "
201 "transactions processed. The only way for a client "
202 "application to keep track of wrap arounds is to retrieve "
203 "the value of the counter in appropriately short intervals. "
204 "\n4=\"Gauge\": The metric is a gauge metric. These have "
205 "integer or float values that can increase and decrease "
206 "arbitrarily. A gauge MUST NOT wrap when reaching the "
207 "minimum or maximum representable number, instead, the value "
208 "\"sticks\" at that number. Minimum or maximum values inside "
209 "of the representable value range at which the metric value "
210 "\"sticks\", may or may not be defined. \n"
211 karl 1.1 "Vendors may extend this property in the vendor reserved "
212 "range."),
213 ValueMap { "0", "2", "3", "4", "5..32767", "32768..65535" },
214 Values { "Unknown", "N/A", "Counter", "Gauge", "DMTF Reserved",
215 "Vendor Reserved" },
216 ModelCorrespondence { "CIM_BaseMetricDefinition.IsContinuous" }]
217 uint16 ChangeType;
218
219 [Experimental, Description (
220 "TimeScope indicates the time scope to which the metric "
221 "value applies. \n"
222 "0=\"Unknown\" indicates the time scope was not qualified by "
223 "the metric designer, or is unknown to the provider. \n"
224 "2=\"Point\" indicates that the metric applies to a point in "
225 "time. On the corresponding BaseMetricValue instances, "
226 "TimeStamp specifies the point in time and Duration is "
227 "always 0. \n"
228 "3=\"Interval\" indicates that the metric applies to a time "
229 "interval. On the corresponding BaseMetricValue instances, "
230 "TimeStamp specifies the end of the time interval and "
231 "Duration specifies its duration. \n"
232 karl 1.1 "4=\"StartupInterval\" indicates that the metric applies to "
233 "a time interval that began at the startup of the measured "
234 "resource (i.e. the ManagedElement associated by "
235 "MetricDefForMe). On the corresponding BaseMetricValue "
236 "instances, TimeStamp specifies the end of the time "
237 "interval. If Duration is 0, this indicates that the startup "
238 "time of the measured resource is unknown. Else, Duration "
239 "specifies the duration between startup of the resource and "
240 "TimeStamp."),
241 ValueMap { "0", "2", "3", "4", "5..32767", "32768..65535" },
242 Values { "Unknown", "Point", "Interval", "StartupInterval",
243 "DMTF Reserved", "Vendor Reserved" },
244 ModelCorrespondence { "CIM_BaseMetricValue.TimeStamp",
245 "CIM_BaseMetricValue.Duration" }]
246 uint16 TimeScope;
247
248 [Experimental, Description (
249 "GatheringType indicates how the metric values are gathered "
250 "by the underlying instrumentation. This allows the client "
251 "application to choose the right metric for the purpose. \n"
252 "0=\"Unknown\": Indicates that the GatheringType is not "
253 karl 1.1 "known. \n"
254 "2=\"OnChange\": Indicates that the CIM metric values get "
255 "updated immediately when the values inside of the measured "
256 "resource change. The values of OnChange metrics truly "
257 "reflect the current situation within the resource at any "
258 "time. An example is the number of logged on users that gets "
259 "updated immediately as users log on and off. \n"
260 "3=\"Periodic\": Indicates that the CIM metric values get "
261 "updated periodically. For instance, to a client "
262 "application, a metric value applying to the current time "
263 "will appear constant during each gathering interval, and "
264 "then jumps to the new value at the end of each gathering "
265 "interval. \n"
266 "4=\"OnRequest\": Indicates that the CIM metric value is "
267 "determined each time a client application reads it. The "
268 "values of OnRequest metrics truly return the current "
269 "situation within the resource if somebody asks for it. "
270 "However, they do not change \"unobserved\", and therefore "
271 "subscribing for value changes of OnRequest metrics is NOT "
272 "RECOMMENDED."),
273 ValueMap { "0", "2", "3", "4", "5..32767", "32768..65535" },
274 karl 1.1 Values { "Unknown", "OnChange", "Periodic", "OnRequest",
275 "DMTF Reserved", "Vendor Reserved" }]
276 uint16 GatheringType;
277 };
278
279
280 // ==================================================================
281 // BaseMetricValue
282 // ==================================================================
283 [Version ( "2.8.1000" ), Description (
284 "Each CIM_BaseMetricValue object represents the instance value "
285 "of a metric. Since the gathering of metric information can "
286 "involve large quantities of information there may be many "
287 "instances of this class. The use of this class as an "
288 "instrumentation source may be inefficient unless the rate of "
289 "metrics are known. The length of time a CIM_BaseMetricValue "
290 "instance exists after the metric information is captured is "
291 "not defined and is implementation dependent. \n"
292 "Most metric data values change over time. There are two ways "
293 "of mapping this into CIM_BaseMetricValue objects: The value "
294 "for the next point in time may use the same object and just "
295 karl 1.1 "change its properties (such as the value or timestamp), or the "
296 "existing objects remain unchanged and a new object is created "
297 "for the new point in time. The first method is typically used "
298 "for snapshot data and the second method for historical data. "
299 "Which method is used, is indicated by the Volatile property.")]
300 class CIM_BaseMetricValue : CIM_ManagedElement {
301
302 [Key, Description (
303 "A unique identifier of this instance of the metric value. "
304 "This must be a globally unique identifier.")]
305 string InstanceId;
306
307 [Required, Description (
308 "The key of the BaseMetricDefinition instance for this "
309 "CIM_BaseMetricValue instance value."),
310 ModelCorrespondence { "CIM_BaseMetricDefinition.Id" }]
311 string MetricDefinitionId;
312
313 [Description (
314 "A descriptive name for the element to which the metric "
315 "value belongs (i.e., the measured element). This property "
316 karl 1.1 "is required by behavior if there is no association defined "
317 "to a ManagedElement, but may be used in other cases to "
318 "provide supplemental information. This allows metrics to be "
319 "captured independently of any ManagedElement. An example is "
320 "where a metric value belongs to a combination of elements, "
321 "such as the input and output ports of the traffic in a "
322 "switch. If there are multiple ManagedElements associated "
323 "with the metric value, then usually there is one that "
324 "naturally belongs to the metric value and that one should "
325 "be used to create the supplemental information. The "
326 "property is not meant to be used as a foreign key to search "
327 "on the measured element. Instead, the association to the "
328 "ManagedElement should be used.")]
329 string MeasuredElementName;
330
331 [Experimental, Description (
332 "Identifies the time when the value of a metric instance is "
333 "computed. Note that this is different from the time when "
334 "the instance is created. For a given CIM_BaseMetricValue "
335 "instance, the TimeStamp changes whenever a new measurement "
336 "snapshot is taken if Volatile is true. A managmenet "
337 karl 1.1 "application may establish a time series of metric data by "
338 "retrieving the instances of CIM_BaseMetricValue and sorting "
339 "them according to their TimeStamp."),
340 ModelCorrespondence { "CIM_BaseMetricDefinition.TimeScope",
341 "CIM_BaseMetricValue.Duration" }]
342 datetime TimeStamp;
343
344 [Experimental, Description (
345 "Property that represents the time duration over which this "
346 "metric value is valid. This property should not exist for "
347 "timestamps that apply only to a point in time but should be "
348 "defined for values that are considered valid for a certain "
349 "time period (ex. sampling). If the \"Duration\" property "
350 "exists and is nonNull, the TimeStamp is to be considered "
351 "the end of the interval."),
352 ModelCorrespondence { "CIM_BaseMetricDefinition.TimeScope",
353 "CIM_BaseMetricValue.TimeStamp" }]
354 datetime Duration;
355
356 [Required, Description (
357 "The value of the metric represented as a string. Its "
358 karl 1.1 "original data type is specified in "
359 "CIM_BaseMetricDefinition.")]
360 string MetricValue;
361
362 [Description (
363 "If present, specifies one BreakdownDimension from the "
364 "BreakdownDimensions array defined in the associated CIM_ "
365 "BaseMetricDefinition. This is the dimension along which "
366 "this set of metric values is broken down. For a description "
367 "of the concept, see the class CIM_BaseMetricDefinition.")]
368 string BreakdownDimension;
369
370 [Description (
371 "Defines a value of the BreakdownDimension property defined "
372 "for this metric value instance. For instance, if the "
373 "BreakdownDimension is \"TransactionName\", this property "
374 "could name the actual transaction to which this particular "
375 "metric value applies.")]
376 string BreakdownValue;
377
378 [Description (
379 karl 1.1 "If true, Volatile indicates that the value for the next "
380 "point in time may use the same object and just change its "
381 "properties (such as the value or timestamp). If false, the "
382 "existing objects remain unchanged and a new object is "
383 "created for the new point in time.")]
384 boolean Volatile;
385 };
386
387
388 // ===================================================================
389 // MetricInstance
390 // ===================================================================
391 [Association, Version ( "2.7.0" ), Description (
392 "Weak association of metric value objects with their metric "
393 "definition. This association ties an instance of "
394 "CIM_BaseMetricValue to its CIM_BaseMetricDefinition; it is "
395 "weak because the existence of a CIM_BaseMetricValue depends on "
396 "the existence of its associated CIM_BaseMetricDefinition: An "
397 "instance of CIM_BaseMetricValue must not exist without being "
398 "associated to its corresponding CIM_BaseMetricDefinition.")]
399 class CIM_MetricInstance : CIM_Dependency {
400 karl 1.1
401 [Override ( "Antecedent" ), Min ( 1 ), Max ( 1 ), Description (
402 "The CIM_BaseMetricDefinition for this particular "
403 "CIM_BaseMetricValue.")]
404 CIM_BaseMetricDefinition REF Antecedent;
405
406 [Override ( "Dependent" ), Description (
407 "A CIM_BaseMetricValue instance holding the Value.")]
408 CIM_BaseMetricValue REF Dependent;
409 };
410
411
412 // ===================================================================
413 // MetricDefForME
414 // ===================================================================
415 [Association, Version ( "2.7.0" ), Description (
416 "This association ties a CIM_BaseMetricDefinition to a "
417 "CIM_ManagedElement to define metrics for the latter. The "
418 "metrics definition is given context by the ManagedElement, "
419 "which is why the definition is dependent on the element.")]
420 class CIM_MetricDefForME : CIM_Dependency {
421 karl 1.1
422 [Override ( "Antecedent" ), Description (
423 "The CIM_ManagedElement that can have metrics of this type "
424 "associated with it.")]
425 CIM_ManagedElement REF Antecedent;
426
427 [Override ( "Dependent" ), Description (
428 "A CIM_BaseMetricDefinition for a CIM_ManagedElement.")]
429 CIM_BaseMetricDefinition REF Dependent;
430 };
431
432
433 // ===================================================================
434 // MetricForME
435 // ===================================================================
436 [Association, Version ( "2.7.0" ), Description (
437 "This association links a ManagedElement to the metric values "
438 "being maintained for it.")]
439 class CIM_MetricForME : CIM_Dependency {
440
441 [Override ( "Antecedent" ), Description (
442 karl 1.1 "ManagedElement to which the metric values belong.")]
443 CIM_ManagedElement REF Antecedent;
444
445 [Override ( "Dependent" ), Description (
446 "A metric value for the ManagedElement.")]
447 CIM_BaseMetricValue REF Dependent;
448 };
449
450
451 // ==================================================================
452 // end of file
453 // ==================================================================
|