Return to Network28_Systems.mof CVS log

Up to [Pegasus] / pegasus / Schemas / CIMPrelim28

PEP#: 215
TITLE: Remove old schemas

DESCRIPTION:

Removing old, unneeded schema files from the repository:

CIM 2.7
CIM 2.7.1 Preliminary
CIM 2.8 Preliminary
CIM 2.9 Preliminary

// ===================================================================
// Title:       Network Systems 2.8
// Filename:    Network28_Systems.mof
// Version:     2.8
// Status:      Preliminary
// Date:        August 18, 2003
// ===================================================================
// Copyright 1998-2003 Distributed Management Task Force, Inc. (DMTF).
// All rights reserved.
// DMTF is a not-for-profit association of industry members dedicated
// to promoting enterprise and systems management and interoperability.
// DMTF specifications and documents may be reproduced for uses
// consistent with this purpose by members and non-members,
// provided that correct attribution is given.
// As DMTF specifications may be revised from time to time,
// the particular version and release date should always be noted.
// 
// Implementation of certain elements of this standard or proposed
// standard may be subject to third party patent rights, including
// provisional patent rights (herein "patent rights"). DMTF makes
// no representations to users of the standard as to the existence
// of such rights, and is not responsible to recognize, disclose, or
// identify any or all such third party patent right, owners or
// claimants, nor for any incomplete or inaccurate identification or
// disclosure of such rights, owners or claimants. DMTF shall have no
// liability to any party, in any manner or circumstance, under any
// legal theory whatsoever, for failure to recognize, disclose, or
// identify any such third party patent rights, or for such party's
// reliance on the standard or incorporation thereof in its product,
// protocols or testing procedures. DMTF shall have no liability to
// any party implementing such standard, whether such implementation
// is foreseeable or not, nor to any patent owner or claimant, and shall
// have no liability or responsibility for costs or losses incurred if
// a standard is withdrawn or modified after publication, and shall be
// indemnified and held harmless by any party implementing the
// standard from any and all claims of infringement by a patent owner
// for such implementations.
// 
// For information about patents held by third-parties which have
// notified the DMTF that, in their opinion, such patent may relate to
// or impact implementations of DMTF standards, visit
// http://www.dmtf.org/about/policies/disclosures.php.
// ===================================================================
// Description: The Network Model extends the management concepts to
//              represent protocol interfaces and network/protocol
//              services.  This file defines network "systems" such
//              as ITU's M.3100 Network and autonomous systems.
// 
//              The object classes below are listed in an order that
//              avoids forward references. Required objects, defined
//              by other working groups, are omitted.
// ==================================================================
// Change Log for v2.8 - None
// 
// Change Log for v2.7
// CR696 - Add M.3100 concepts of Network and Pipe
// CR792 - Add the Composition qualifer to RoutersInAS
// CR982 - Removal of Experimental for preliminary to final
// ===================================================================

#pragma Locale ("en_US")


// ==================================================================
// Network
// ==================================================================
   [Version ("2.7.0"), Description (
       "Network is a subclass of AdminDomain that groups "
       "interconnected networking and computing objects capable of "
       "exchanging information.  Instances of CIM_Network can "
       "represent an enterprise's global network or specific "
       "connectivity domains within the global network.  These "
       "concepts are similar to those defined for the Network object "
       "in ITU's M.3100 specification."), 
    MappingStrings {"Recommendation.ITU|M3100.Network"} ]
class CIM_Network : CIM_AdminDomain {
};


// ==================================================================
// AutonomousSystem
// ==================================================================
   [Version ("2.6.0"), Description (
       "An Autonomous System (AS) is a fundamental concept in "
       "networking.  An AS provides a structured view of routing by "
       "segregating the system that is using routing (e.g., the "
       "Internet, or an extranet) into a set of separately "
       "administered domains that each have their own independent "
       "routing policies.  These domains are called autonomous systems.\n"
       "\n"
       "The classic definition of an AS, from RFC1771, is '...a set of "
       "routers under a single technical administration, using an "
       "interior gateway protocol and common metrics to route packets "
       "within the AS, and using an exterior gateway protocol to route "
       "packets to other ASs'.  The RFC continues: 'Since this classic "
       "definition was developed, it has become common for a single AS "
       "to use several interior gateway protocols and sometimes "
       "several sets of metrics within an AS.  The use of the term "
       "Autonomous System here stresses the fact that, even when "
       "multiple IGPs and metrics are used, the administration of an "
       "AS appears to other ASs to have a single coherent interior "
       "routing plan and presents a consistent picture of what "
       "destinations are reachable through it.'") ]
class CIM_AutonomousSystem : CIM_AdminDomain {

      [Description (
          "An ASNumber is an integer between 1 and 65535, with the "
          "range 64512 through 65535 reserved for private use.  Every "
          "AS has a unique AS number, which is assigned to it by an "
          "Internet Registry or a provider.  IANA assigns and "
          "administers AS numbers.") ]
   uint16 ASNumber;

      [Description (
          "IsSingleHomed is a boolean that, when its value is TRUE, "
          "indicates that this AS reaches networks outside of its "
          "domain through a single exit point.") ]
   boolean IsSingleHomed;

      [Description (
          "IsTransit is a boolean that, when its value is TRUE, "
          "indicates that this AS will advertise routes that it learns "
          "from other ASs.  A non-transit AS will only advertise its "
          "own routes.") ]
   boolean IsTransit;

      [Description (
          "RequireIGPSync is a boolean that, when its value is TRUE, "
          "indicates that this AS must obey the following rule: a "
          "router should not advertise destinations learned from "
          "internal neighbors to external destinations unless those "
          "destinations are also known via some internal gateway "
          "protocol.  Otherwise, a router may receive traffic that "
          "cannot yet be routed.  However, since this is a costly "
          "choice, it is common practice to allow this rule to be "
          "broken under certain carefully controlled circumstances.") ]
   boolean RequireIGPSync;

      [Description (
          "RoutingUpdateSource defines how routing information is to "
          "be injected.  Statically injected routes are maintained by "
          "the routing table and are independent of the status of the "
          "networks to which they refer.  This is done simply by "
          "defining static routes in the routing table.  Dynamically "
          "injected routes are of two types.  Dynamic routes refer to "
          "distributing all of the IGP routes.  Semi-dynamic routes "
          "define a set of specific IGP routes that will be injected."), 
       ValueMap {"0", "1", "2", "3"}, 
       Values {"Unknown", "Static", "Dynamic", "Semi-Dynamic"} ]
   uint16 RoutingUpdateSource;

      [Description (
          "Route aggregation refers to summarizing ranges of routes "
          "into one or more aggregate routes.  This is done to "
          "minimize the number of routes in the global routing table.  "
          "A potential drawback is that specific path information "
          "(e.g., the Path attribute value) is lost, which may lead to "
          "potential routing loops.  There are a variety of ways to "
          "ensure that this does not happen.  Note that BGP4 is "
          "required to do this.\n"
          "\n"
          "There are many ways to form aggregate routes.  The "
          "following are the most popular: 'Aggregate only', where "
          "only the aggregate is advertised, and all of its more "
          "specific routes are suppressed; 'Aggregate Plus Specific "
          "Routes', where both the aggregate as well as its more "
          "specific routes are advertised (e.g., send the aggregate to "
          "the NAP, but send the more specific routes to providers); "
          "'Aggregate Based on a Subset of Specific Routes', where the "
          "aggregate route is formed by looking at certain more "
          "specific routes and forming an aggregate on them, "
          "suppressing all others."), 
       ValueMap {"0", "1", "2", "3", "4"}, 
       Values {"Unknown", "None", "Aggregate Only ",
           "Aggregate And All Specific Routes ",
           "Aggregate Based on Subset of Specific Routes"} ]
   uint16 AggregationType;
};

// ==================================================================
// RoutersInAS
// ==================================================================
   [Association, Aggregation, Composition, Version ("2.7.0"), 
    Description (
       "This aggregation establishes 'whole-part' relationships "
       "between an AutonomousSystem and the routers that it contains.  "
       "In addition, the routers in the AS share common configuration "
       "information, and are commonly administered.") ]
class CIM_RoutersInAS : CIM_SystemComponent {

      [Aggregate, Override ("GroupComponent"), Max (1), Description (
          "The AutonomousSystem that aggregates the routers belonging "
          "to it and administers them.") ]
   CIM_AutonomousSystem REF GroupComponent;

      [Override ("PartComponent"), Description (
          "The Routers that are contained in the AS.") ]
   CIM_ComputerSystem REF PartComponent;

      [Description (
          "This is an array of strings that contain the BGP attributes "
          "supported by this router.") ]
   string BGPSupportedAttributes[];

      [Description (
          "TRUE means that the community value of this router is added "
          "to the existing community value, and FALSE means that the "
          "community value of this router replaces the existing "
          "community value.") ]
   boolean AddCommunityValue;

      [Description (
          "This is an enumeration that defines the function, from the "
          "point of view of BGP, of this router."), 
       ValueMap {"0", "1", "2", "3", "4", "5", "6", "7"}, 
       Values {"Unknown", "Other", "Conventional BGP Speaker",
           "Route Reflector", "Router Reflector Client",
           "Route Reflector Non-Client", "Peer Group Member",
          "Confederation Member"}, 
       ModelCorrespondence { "CIM_BGPService.OtherRoleDescription"} ]
   uint16 Role;

      [Description (
          "A string describing the type of function that this router "
          "has in its AS when the value of the Role property of this "
          "class is set to 1 (i.e., \"Other\").  The format of the "
          "string inserted in this property should be similar in "
          "format to the values defined for the Role property.  This "
          "property should be set to NULL when the Role property is "
          "any value other than 1."), 
       MaxLen (64), 
       ModelCorrespondence {"CIM_BGPService.Role"} ]
   string OtherRoleDescription;
};


// ===================================================================
// end of file
// ===================================================================